Simulation of non‐planar three‐dimensional hydraulic fracture propagation

Hydraulic fracturing is the method of choice to enhance reservoir permeability and well efficiency for extraction of shale gas. Multi‐stranded non‐planar hydraulic fractures are often observed in stimulation sites. Non‐planar fractures propagating from wellbores inclined from the direction of maximum horizontal stress have also been reported. The pressure required to propagate non‐planar fractures is in general higher than in the case of planar fractures. Current computational methods for the simulation of hydraulic fractures generally assume single, symmetric, and planar crack geometries. In order to better understand hydraulic fracturing in complex‐layered naturally fractured reservoirs, fully 3D models need to be developed. In this paper, we present simulations of 3D non‐planar fracture propagation using an adaptive generalized FEM. This method greatly facilitates the discretization of complex 3D fractures, as finite element faces are not required to fit the crack surfaces. A solution strategy for fully automatic propagation of arbitrary 3D cracks is presented. The fracture surface on which pressure is applied is also automatically updated at each step. An efficient technique to numerically integrate boundary conditions on crack surfaces is also proposed and implemented. Strongly graded localized refinement and analytical asymptotic expansions are used as enrichment functions in the neighborhood of fracture fronts to increase the computational accuracy and efficiency of the method. Stress intensity factors with pressure on crack faces are extracted using the contour integral method. Various non‐planar crack geometries are investigated to demonstrate the robustness and flexibility of the proposed simulation methodology. Copyright © 2014 John Wiley & Sons, Ltd.     

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.     

Coupled formulation and algorithms for the simulation of non‐planar three‐dimensional hydraulic fractures using the generalized finite element method

This paper presents a coupled hydro‐mechanical formulation for the simulation of non‐planar three‐dimensional hydraulic fractures. Deformation in the rock is modeled using linear elasticity, and the lubrication theory is adopted for the fluid flow in the fracture. The governing equations of the fluid flow and elasticity and the subsequent discretization are fully coupled. A Generalized/eXtended Finite Element Method (G/XFEM) is adopted for the discretization of the coupled system of equations. A Newton–Raphson method is used to solve the resulting system of nonlinear equations. A discretization strategy for the fluid flow problem on non‐planar three‐dimensional surfaces and a computationally efficient strategy for handling time integration combined with mesh adaptivity are also presented. Several three‐dimensional numerical verification examples are solved. The examples illustrate the generality and accuracy of the proposed coupled formulation and discretization strategies. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved algorithms for generalized finite element simulations of three-dimensional hydraulic fracture propagation

This paper reports improvements to algorithms for the simulation of 3-D hydraulic fracturing with the Generalized Finite Element Method (GFEM). Three optimizations are presented and analyzed. First, an improved initial guess based on solving a 3-D elastic problem with the pressure from the previous step is shown to decrease the number of Newton iterations and increase robustness. Second, an improved methodology to find the time step that leads to fracture propagation is proposed and shown to decrease significantly the number of iterations. Third, reduced computational cost is observed by properly recycling the linear part of the coupled stiffness matrix. Two representative examples are used to analyze these improvements. Additionally, a methodology to include the leak-off term is presented and verified against asymptotic analytical solutions. Conservation of mass is shown to be well satisfied in all examples.     

Investigation of hydraulic fracturing operation and fracture propagation simulation in reservoir rock

For many decades most oil wells in Iran have produced using their natural flow potential and haven’t needed to be fractured. As time goes by, the reservoir pressure depletes and the need for hydraulic fracturing as a stimulation practice arises. Nonetheless there is no record of successful hydraulic fracturing in Iran.

The Bangestan reservoir with a suitable amount of oil in place and good rock reservoirs, has been selected for the present research work. In this work, the in situ stress profile was calculated by using the available petrophysical data. This is achieved by using poroelastic theory for the stresses, and the Mohr–Coulomb criterion to predict failure. The model leads to easily computed expressions for calculating the pressure required to maintain hydraulic fracturing. Then the appropriate depth for treatment was determined. The results indicate that Ilam and Sarvak formations could be good candidates for hydraulic fracturing. Then, for two layers, a hydraulic fracture was designed and the production was predicted and the Net Present Value (NPV) resulting from the fracture of both layers was investigated.     

Numerical modeling of hydraulic fracture propagation,closure and reopening using XFEM with application to in‐situ stress estimation

In this paper, a fully coupled model is developed for numerical modeling of hydraulic fracturing in partially saturated weak porous formations using the extended finite element method, which provides an effective means to simulate the coupled hydro‐mechanical processes occurring during hydraulic fracturing. The developed model is for short fractures where plane strain assumptions are valid. The propagation of the hydraulic fracture is governed by the cohesive crack model, which accounts for crack closure and reopening. The developed model allows for fluid flow within the open part of the crack and crack face contact resulting from fracture closure. To prevent the unphysical crack face interpenetration during the closing mode, the crack face contact or self‐contact condition is enforced using the penalty method. Along the open part of the crack, the leakage flux through the crack faces is obtained directly as a part of the solution without introducing any simplifying assumption. If the crack undergoes the closing mode, zero leakage flux condition is imposed along the contact zone. An application of the developed model is shown in numerical modeling of pump‐in/shut‐in test. It is illustrated that the developed model is able to capture the salient features bottomhole pressure/time records exhibit and can extract the confining stress perpendicular to the direction of the hydraulic fracture propagation from the fracture closure pressure. Copyright © 2016 John Wiley & Sons, Ltd.     

基于扩展有限元分析的页岩水力压裂裂缝扩展规律探究

水力压裂是开采地下页岩气资源的有效技术手段,探究页岩水力压裂裂缝的扩展规律,可为页岩气的高效开采提供科学的指导依据。通过运用大型有限元软件ABAQUS中的扩展有限元模块,针对不同地应力差工况条件下均质页岩中初始裂缝的位置、方位角、数量和含层理页岩中层理的构造方向、内部倾角、岩性对水力裂缝扩展的影响进行探究。结果表明：对于垂向扩展的水力裂缝,水平主应力增大使裂缝更不易扩展,裂缝扩展长度减小、起裂压力增大;在注液体积流量相同时,向初始裂缝两端同时起裂所形成的水力裂缝长度大于仅向一侧起裂;当初始裂缝处于页岩中部且呈45°方向时,裂缝会向最大水平主应力方向偏转,且偏转程度随最大水平主应力的增大而增大;分时多簇压裂时,裂缝间的扩展会相互干扰,且会较大地影响裂缝扩展的形态和起裂压力,但对裂缝注液点裂缝宽度的影响较小;对于含水平和竖直构造层理的页岩,改变层理内部倾角,水力裂缝会出现不同程度偏转,且其偏转程度随着层理内部倾角的增大而减小;对于含45°方向构造层理的页岩,水力裂缝在层理分别为砂岩、煤岩和泥岩中的偏转程度依次增大,且裂缝偏移比随着最大水平主应力的增大而增大。     

A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing

Within the framework of our discontinuous deformation analysis for rock failure algorithm, this paper presents a two‐dimensional coupled hydromechanical discontinuum model for simulating the rock hydraulic fracturing process. In the proposed approach, based on the generated joint network, the calculation of fluid mechanics is performed first to obtain the seepage pressure near the tips of existing cracks, and then the fluid pressure is treated as linearly distributed loads on corresponding block boundaries. The contribution of the hydraulic pressure to the initiation/propagation of the cracks is considered by adding the components of these blocks into the force matrix of the global equilibrium equation. Finally, failure criteria are applied at the crack tips to determine the occurrence of cracking events. Several verification examples are simulated, and the results show that this newly proposed numerical model can simulate the hydraulic fracturing process correctly and effectively. Although the numerical and experimental verifications focus on one unique preexisting crack, because of the capability of discontinuous deformation analysis in simulating block‐like structures, the proposed approach is capable of modeling rock hydraulic fracturing processes. Copyright © 2014 John Wiley & Sons, Ltd.     

预制横缝条件下水力裂缝的起裂和扩展

针对高角度天然裂缝发育地层中的水平井水力压裂问题,开展了水力裂缝自天然裂缝处起裂扩展的理论和试验研究。尝试将天然裂缝简化为与井筒轴线垂直的横向裂缝,基于线弹性断裂力学理论和最大拉应力准则,给出了水力裂缝起裂压力和扩展过程中应力强度因子的计算方法。利用预制横缝模拟高角度天然裂缝,开展了室内水力压裂试验,对水力裂缝的扩展形态和起裂压力进行了研究。理论计算表明,（1）水力裂缝自预制横缝端部起裂后,扩展距离超过1倍的预制横缝端部半径时可将预制横缝和水力裂缝合并起来,整体视作一条横向裂缝来计算应力强度因子;（2）水力裂缝尖端距井壁处的距离大于4倍的井筒半径时,应力强度因子的计算可忽略井筒的影响,近似采用硬币形裂缝的计算公式。试验研究发现,（1）水力裂缝在预制横缝端部起裂并扩展,形成与井筒轴线垂直的横向裂缝,裂缝的扩展呈现出Ⅰ型断裂的特点,形态近似呈圆形,未发现与井筒轴线平行的纵向裂缝的起裂和扩展;（2）排量对破裂净压力和起裂净压力有重要影响,大排量会导致较高的破裂净压力和起裂净压力,在大、小两种排量下起裂净压力的离散性均较小,计算得到的KⅠ临界断裂值的离散性也较小。研究结果可为改善裂缝发育储层的近井裂缝形态提供指导,也可为煤矿开采中预制横向切槽的水力压裂设计提供参考。     

Simulation of hydraulic fracture propagation near a natural fracture using virtual multidimensional internal bonds

A virtual multidimensional internal bond (VMIB) model developed to simulate the propagation of hydraulic fractures using the finite‐element method is formulated within the framework of the virtual internal bond theory (VIB) that considers a solid as randomized material particles in the micro scale, and derives the macro constitutive relation from the cohesive law between the material particles with an implicit fracture criterion. Hydraulic pressure is applied using a new scheme that enables simulation of hydraulically driven cracks. When the model is applied to study hydraulic fracture propagation in the presence of a natural fracture, the results show the method to be very effective. It shows that although the in situ stress ratio is the dominant factor governing the propagation direction, a natural fault can also strongly influence the hydraulic fracture behavior. This influence is conditioned by the shear stiffness of the fault and the distance to the original hydraulic fracture. The model results show that when the fault is strong in shear, its impact on hydraulic fracture trajectory is weak and the hydraulic fracture will likely penetrate the fault. For a weak fault, however, the fracture tends to be arrested at the natural fault. The distance between the fault and the hydraulic fracture is also important; the fault influence increases with decreasing distance. The VMIB does not require selection of a fracture criterion and remeshing when the fracture propagates. Therefore, it is advantageous for modeling fracture initiation and propagation in naturally fractured rock. Copyright © 2010 John Wiley & Sons, Ltd.     

砂砾岩水力压裂裂缝扩展规律的数值模拟分析

砂砾岩储层一般具有岩性和渗透性变化大、孔隙度低、连通性差、孔隙结构复杂和非均匀性严重等特点,因此,在水力压裂过程中,裂缝扩展形态难以控制,大规模改造难度大。针对国内某典型砂砾岩油藏特征,采用数值计算方法对砂砾岩压裂裂缝的扩展规律进行了研究,包括地应力场、砾石含量和粒径等对裂缝扩展形态及压裂压力的影响。研究表明,砾石的存在增加了压裂裂纹扩展的复杂性,裂纹主要有止裂、偏转、穿透和吸附4种表现模式,但主应力差严格控制着裂纹的走向,随着主应力差的增大,裂纹由总体绕砾扩展转变为总体穿砾扩展,失稳压力随着主应力差的增大而明显减小;砾石含量的多少体现了砂砾岩试样宏观的非均匀性,含量越高均匀性越差,随着砾石含量的提高,裂纹与砾石的相互作用占据主导地位,失稳压力随砾石含量的增加而增大;当砾石体积含量一定时,砾石粒径对压裂压力的影响主要取决于砾石排列的随机性,失稳压力随砾石粒径的增大而略有增大。     

Finite element simulations of 3D planar hydraulic fracture propagation using a coupled hydro-mechanical interface element

Two-dimensional hydraulic fracturing simulations using the cohesive zone model (CZM) can be readily found in the literature; however, to our knowledge, verified 3D cohesive zone modeling is not available. We present the development of a 3D fully coupled hydro-mechanical finite element method (FEM) model (with parallel computation framework) and its application to hydraulic fracturing. A special zero-thickness interface element based on the CZM is developed for modeling fracture propagation and fluid flow. A local traction-separation law with strain softening is used to capture tensile cracking. The model is verified by considering penny-shaped hydraulic fracture and plain strain Kristianovich‑Geertsma‑de Klerk hydraulic fracture (in 3D) in the viscosity- and toughness-dominated regimes. Good agreement between numerical results and analytical solutions has been achieved. The model is used to investigate the influence of rock and fluid properties on hydraulic fracturing. Lower stiffness tip cohesive elements tend to yield a larger elastic deformation around the fracture tips before the tensile strength is reached, generating a larger fracture length and lower fracture pressure compared with higher stiffness elements. It is found that the energy release rate has almost no influence on hydraulic fracturing in the viscosity-dominated regime because the energy spent in creating new fractures is too small when compared with the total input energy. For the toughness-dominated regime, the released energy during fracturing should be accurately captured; relatively large tensile strength should be used in order to match numerical results to the asymptotic analytical solutions. It requires smaller elements when compared with those used in the viscosity-dominated regime.     

煤岩水力压裂起裂压力和裂缝扩展机制实验研究

为了研究煤岩水力压裂的起裂压力和水力压裂裂缝扩展规律,采用型煤试样,利用自主研发的水力压裂实验系统,参照现场压裂施工制定了“施加三向应力-顶部注水”的煤岩水力压裂物理模拟实验方案并开展了水力压裂实验,分析了不同条件下泵注压力和水力压裂裂缝。实验结果表明：压裂液泵注排量越大,起裂压力越大。三向应力满足最大水平主应力σ_H > 垂向应力σ_v > 最小水平主应力σ_h,水力压裂裂缝沿着垂直于σ_h的方向扩展。σ_v和σ_h一定,随着σ_H的增大,煤岩起裂压力先增大后减小,水力压裂裂缝扩展路径越平直。当σ_H远大于σ_v和σ_h时,水力压裂裂缝扩展路径越复杂,分叉缝角度越大。研究结果可为煤岩水力压裂理论的完善提供一定的参考和借鉴。     

水力裂缝在煤岩界面处穿层扩展规律的数值模拟

为研究水力压裂裂缝在煤层与顶板界面处的穿层扩展规律,在分析煤岩界面性质的基础上,应用有限元法研究煤岩界面处裂缝从顶板起裂后的延伸情况,探讨了相关地质参数和施工参数对裂缝跨界面穿层扩展的影响。结果表明：地质因素中的地应力、煤岩界面强度为煤岩界面处裂缝能否穿层扩展的主要影响因素,垂向应力差异系数越大、界面抗剪切强度越大,越有利于裂缝穿层扩展沟通煤层;煤层与顶板间的弹性模量差异、抗拉强度差异是裂缝从顶板穿层进入煤层的有利因素;现场压裂施工应根据地层情况选择合适的施工参数（排量、注入点与界面的距离）以促进裂缝穿层扩展。研究成果能够为煤层顶板分段压裂水平井地面煤层气高效抽采技术的应用提供参考。     

Geometric nature of hydraulic fracture propagation in naturally-fractured reservoirs

The geometry of hydraulic fracture propagation in the absence and presence of natural fractures in reservoirs was studied. The results revealed a marked influence of natural fractures on the symmetry of fracture propagation observed for rock free of natural fractures. Natural fracture properties such as stiffness and approaching angle, and the distance from wellbore to the natural fracture were found to influence the hydraulic fracture geometry. Furthermore, the location of the wellbore with respect to the natural fractures in a reservoir having a system of natural fractures displayed a significant influence on the resulting geometry of hydraulic fracture propagation.     

煤岩水力压裂裂缝扩展形态试验研究

通过室内水力压裂物理模拟试验系统,对大尺寸原煤进行了水力压裂模拟试验,根据水力裂缝的空间展布形态分析了煤岩储层水力裂缝的延伸规律,揭示了网状裂缝的形成机制。结果表明：水力裂缝易在弱层理处分叉和转向,发育的层理和裂缝系统等结构面为压裂形成裂缝网络提供了前提条件。泵压曲线呈现出的频繁波动是煤岩内产生网状裂缝的一个显著特征。水力裂缝的起裂与延伸有4种基本模式,裂缝网络的形成多为这4种基本模式的组合。地应力差异系数和泵注排量对煤层水力裂缝形态有较大影响。较小的地应力差异系数更利于网状裂缝的形成;较高的压裂液排量易形成相对简单的裂缝形态,导致压裂改造效果较差。该试验方法和试验结果可为现场水力压裂参数设计和优化提供参考和依据。     

Modeling hydraulic fracture propagation in permeable media with an embedded strong discontinuity approach

The paper presents an embedded strong discontinuity approach to simulate single hydraulic fracture propagation in the poroelastic medium under plane-strain conditions. The method enriches the strain field with the discontinuous deformation mode and allows the fracture to be modeled inside elements. The Mode-I fracture initiation and propagation are described by the trilinear cohesive law, which is implemented by the penalty method. The enhanced permeability inside the fractured elements is dependent on the fracture aperture. Hydraulic fracture propagation is driven by the high pressure gradient near the fracture. Fluid transfer between the fracture and bulk rock is automatically captured within the poroelastic framework. The numerical framework is verified by the comparisons with the asymptotic analytical solutions for single hydraulic fracture propagation.     

基于ABAQUS平台的水力裂缝扩展有限元模拟研究

随着扩展有限元理论的深入研究,利用扩展有限元方法模拟水力压裂具有了一定的可操作性。相比于常规有限元方法,XFEM方法具有计算结果精度高和计算量小的优点。但是,如何模拟射孔孔眼、如何模拟流体与岩石相互作用以及分析水力裂缝的扩展规律仍然是难题。以研究水力压裂裂缝扩展规律为目的,建立了岩石多孔介质应力平衡方程、流体渗流连续性方程和边界条件。通过有限元离散化方法对耦合方程矩阵进行处理。通过富集函数定义初始裂缝（射孔孔眼）,选择最大主应力及损伤变量D分别作为裂缝起裂和扩展判定准则,利用水平集方法模拟水力裂缝扩展过程。数值模拟结果显示：增加射孔方位角、压裂液排量和减小水平地应力差,起裂压力上升;黏度对起裂压力无明显影响。增加射孔方位角、压裂液排量、黏度和减小水平地应力差值有助于裂缝宽度的增加。增加水平地应力差值、压裂液排量和减小射孔方位角以及压裂液黏度有助于裂缝长度增加,反之亦然。基于ABAQUS的水力裂缝扩展有限元法可对不同井型和诸多储层物性参数及压裂施工参数进行分析,且裂缝形态逼真,裂缝面凹凸程度清晰,结果准确。此研究可作为一种简便有效研究水力压裂裂缝扩展规律的方法为油田水力压裂设计与施工提供参考与依据。     

大尺寸真三轴页岩水平井水力压裂物理模拟试验与裂缝延伸规律分析

采用真三轴物理模型试验机、水力压裂伺服系统、声发射定位系统以及压裂液中添加示踪剂等方式,在真三轴条件下对大尺寸页岩水平井进行了水力压裂物理模拟试验,通过裂缝的动态监测和压裂后剖切等分析了裂缝的扩展规律,并对页岩压裂缝网的形成机制进行了初步探讨。结果表明：（1）水力裂缝自割缝处起裂并扩展、压开或贯穿层理面,形成相对较复杂的裂缝形态;（2）裂缝中既有垂直于层理面的新生水力主裂缝,又有沿弱层理面扩展延伸的次级裂缝,形成了纵向和横向裂缝并存的裂缝网络;（3）水力裂缝在延伸过程中会发生转向而逐渐垂直最小主应力;（4）水力裂缝在扩展过程中遇到弱层理面时的止裂、分叉、穿过和转向现象是形成页岩储层复杂裂缝网络的主要原因,而弱结构面的大量存在是形成复杂裂缝的基础。其研究结果可为页岩气藏水平井分段压裂开采等提供有力技术支持。     

地应力对破裂压力和水力裂缝影响的试验研究

为研究水力压裂时地应力对破裂压力和水力裂缝的影响规律,采用水力压裂试验系统,以相似材料作为研究对象,进行了水力压裂物理模拟试验,并借助煤岩断面三维扫描系统、位移计提取了水力裂缝信息。试验结果表明,随着主应力差的增大,破裂压力逐渐降低,破裂时间也逐渐缩短;随着主应力差的增大,破裂面的表面积逐渐增加,破裂面变得逐渐粗糙;围压相近时水力裂缝易出现转向、分叉,压裂液的动力效应越明显;水力裂缝张开度随着主应力差的增大而逐渐减小。研究结果可为水力压裂试验的进一步研究、裂缝网络系统的建立提供参考。