三种体系萃取分离-液闪测定海水中234Th的比较研究

本文对TOA萃取剂萃取钍适宜的操作条件及萃取溶剂进行了试验,提出了TOA/苯萃取234Th的最佳条件: 在 1cm3含 234Th的 6mol/dm3 HNO3 溶液中,用体积比为 0. 5的TOA/苯溶液 2cm3 萃取,然后用 2cm3 1. 0mol/dm3 H2SO4反萃取,最高萃取率达 94%.对TOA/苯、TBP/煤油和TTA/苯这 3种萃取体系的萃取效率及其影响因素、萃取机理、成本等做了比较,认为 3种体系各有利弊,但均可有效地应用于相关的海洋学研究中.     

超低水平液闪谱仪测定雨水、海水中的宇生核素32P和33P

本研究旨在建立用超低水平液闪谱仪测定雨水、海水中的宇生核素32P3、3P的方法.通过对液闪谱仪的主要性能与技术参数进行优化设置,对液闪谱仪的效率及能量进行刻度,建立淬灭校正曲线,探讨影响测量本底的因素,实现液闪谱仪对样品的优化测量.并通过液闪谱仪对厦门沿岸地区雨水及厦门湾海水进行测量,得到2004年3月至2005年2月雨水中32P3、3P的月平均比活度分别为0.30×10-2~3.18×10-2、0.28×10-2~3.05×10-2Bq/dm3,33P/32P)A.R.月平均值介于0.74~0.96之间,平均为0.87±0.03;厦门湾海水中32P、33P的比活度分别为1.52×10-2~4.62×10-2、1.28×10-2~3.72×10-2Bq/m3,33P/32P)A.R.为0.81~0.91.     

海水中228Th、234Th、228Ra的联合富集与测定

采用大体积现场泵方法同时采集不同粒级的^228Th、^234Th及溶解态的^228Th、^234Th、^228Ra．以小体积MnO2共沉淀-β计数法测定海水中的总^234Th活度（A＇TTh）；用Goflo采水器采集6～10dm^3海水，继而过滤收集颗粒物质并测定其^234Th的活度（A’PTh）；以α能谱测定分离纯化后的^228Th；对^228Ra则是采用测定其子体^228Ac的β放射性方法．采用此流程分析了南海2004年2月航次A1站住的样品，获得了较好的结果．     

海水U、Th长寿命核素的高精密度MC-ICP-MS测定方法

建立了适合海水U、Th同位素高精密度测量要求的MC-ICP-MS方法.确定了采用Mg(OH)2共沉淀法富集海水U、Th同位素时的最佳NH3·H2O浓度为0.14 mol/dm3.采用CRM-145 U标准溶液,经质量分馏、电子倍增器增益、丰度灵敏度、仪器及试剂本底和记忆效应等校正后,历时3个月得235U/238U和234U/238U的准确度分别优于0.05%和0.08%,精密度分别优于0.12%和0.10%.将该方法应用于台湾海峡B9站位3份平行水样中U、Th同位素含量及比值的测定,得238U平均含量为3.05±0.05μg/kg,234U/238U平均值为(6.28±0.11)×10-5,U含量及其同位素比值的标准偏差均小于3%;232Th的平均含量为(1.66±0.04)×103pg/kg,232Th/230Th平均值为(1.95±0.01)×105,Th含量及其同位素比值的标准偏差均小于2%.测定结果与海区的水文学条件及物质来源相吻合,证明了方法的可靠性.     

海水中-氧化氮的化学发光法测定

基于鲁米诺-H2O2混合溶液作为发光液与海水中NO发生反应产生发光信号的原理,提出了一种测定海水中痕量NO的化学发光法.确定了化学发光法测定NO的最佳条件:pH9.2、浓度1×10-2 mol/dm3的碳酸盐为缓冲体系,鲁米诺浓度为8.4×10-5 mol/dm3,H2O2浓度为1×10-2 mol/dm3,测定温度为...     

泥蚶肌肉组织蛋白质双向电泳体系的建立

本研究建立了泥蚶肌肉组织蛋白质的双向电泳体系.提取泥蚶肌肉组织全蛋白,进行了双向电泳分离的初步尝试,并对各个关键因素和环节进行了优化比较.优化的裂解液配方是8mol/dm3 Urea,1.5mol/dm3 Thioruea,4% CHAPS,10mmol/dm3 Tris,2mmol/dm3 TBP,0.2%Bio-Lyte3/10ampholyte,1mmol/dm3 PMSF以及1mmol/dm3 EDTA.使用pH值为4～7的IPG胶条进行被动水化上样,等电聚焦采用缓慢升压模式,电泳参数设置和染色方法等根据Bio-rad公司推荐的进行调整.最终获得了较满意的双向电泳图谱,具有较高的分辨率和重复性,成功建立了泥蚶肌肉组织蛋白质双向电泳分离体系.     

海水中锶-90和铯-137的同时测定

本文研究了海水中痕量锶—90和铯—137同时测定的方法,在酸性条件下采用磷钼酸铵(AMP)浓集铯—137;0.45mol/dm3 HDEHP—正庚烷直接萃取钇—90(锶—90子体),沉淀源分别为碘铋酸铯、草酸钇进行低本底β—计数。本方法简便、快速,对主要核素去污效果较好;精密度和准确度均好,测定方法最低检测活度90Sr为4.5×103Bq/dm3,137Cs为5.7×10-3Bq dm3。     

海洋放射年代学的若干问题

海洋放射年代学是同位素地质学的一门分支学科.它主要是应用天然放射性核素:230Th、231Pa、234U、238U、232Th、226Ra、210Pb、14C测定珊瑚礁、鲕岩、海泥、软体动物贝壳的年龄,测定锰结核和海洋沉积物积累的速度;研究放射性元素在海水、悬浮物和沉积物中垂直和空间分布的特征;讨论放射性元素和同位素存在形式和沉淀机理;阐述海洋物质来源;探讨锰结核成因等.     

海水中丙烯酸的高效液相色谱法建立及应用

建立了一种测定海水介质中丙烯酸的高效液相色谱法。采用耐纯水相和较低pH的Agilent SB-Aq-C18柱(100 mm×4.6 mm i.d.,5 μm), 0.35%磷酸溶液(pH=2)为流动相,使用紫外检测器,检测波长为210 nm,外标法定量测定。丙烯酸的保留时间在14.2~ 14.9 min,方法的检出限为4 nmol/dm3(S/N=3),在0.01~10 μmol/dm3的范围内均有良好的线性关系,相关系数可达0.999 6,加标回收率为95.4%~98.1%,相对标准偏差为1.3%~1.6%(1.04~2.32 μmol/dm3)。采用0.2 μm滤膜重力过滤冷藏的办法来保存海水丙烯酸样品。检测出2011年5月份青岛近海海水中丙烯酸的平均浓度为(0.101±0.069) μmol/dm3;海洋微藻球形棕囊藻在整个生长周期内培养体系中丙烯酸的浓度为0.339~2.219 μmol/dm3。     

MnO2共沉淀直接β计数测定小体积海水中的234Th

探讨了MnO₂共沉淀直接β计数测定小体积海水中234Th方法在固体闪烁α/β计数仪上实现的可能性,对实验流程空白、流程化学回收率、仪器探测效率、MnO₂共沉淀量对全程回收率的影响以及检测核素的特征性等进行了研究.结果表明,该方法具有稳定的流程空白和全程回收率、高的探测效率和化学回收率,且所检测核素与234Th的理论半衰期基本吻合.将该流程应用于亚热带北太平洋表层水中234Th的分析也得到了令人满意的结果.与传统方法相比,该方法具有流程简单、所用水样体积小、快速获得结果等特点,适合于船载分析,由此可实现高时空分辨率数据的获取,为海洋颗粒有机碳输出通量以及颗粒物迁移速率的研究提供了更好的分析手段.     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

INFORMATION FOR AUTHORS

<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,     

Estimation of Sediment Properties during Benthic Impact Experiments

Sediment properties, such as water content and density, have been used to estimate the dry and wet weights, as well as the volume of sediment recovered and discharged, during benthic impact experiments conducted in the Pacific and Indian Oceans. The estimates show that the weights of dry (355-1332 t) and wet sediment (1651-4888 t) recovered during the experiments, are not only a function of the total duration and distance covered during the experiment, but also depend on water content and density of the sediment. Estimation of dry sediment and its volumetric ratio in the discharge, are key parameters for calculating the discharged volume. The estimated volume of wet sediment recovered (1427-4049 m 3 ) as well as discharged (2693-6951 m 3 ) during the experiments, provide important inputs to evaluate the sediment resettlement and migration. Using these estimates, the average depth of excavation on the seafloor, can also been calculated. However, the stages of sediment recovery and discharge are expressed differently in some of the experiments. In order to standardize these, different stages have been identified, and definitions of certain terms have been suggested, for use in the future. The methods of calculating different properties, as well as weight and volume of discharged sediment are described in the paper for use in other applications concerning deep-sea discharges.