Quantitative P–T–X constraints on orthopyroxene-bearing high-pressure granulites in felsic–metapelitic rocks: evidence from the Huangtuling granulite, Dabieshan Orogen

High‐pressure granulites are generally characterized by the absence of orthopyroxene. However, orthopyroxene is reported in a few high‐pressure, felsic–metapelitic granulites, such as the Huangtuling felsic high‐pressure granulite in the North Dabie metamorphic core complex in east‐central China, which rarely preserves the high‐pressure granulite facies assemblage of garnet + orthopyroxene + biotite + plagioclase + K‐feldspar + quartz. To investigate the effects of bulk‐rock composition on the stability of orthopyroxene‐bearing, high‐pressure granulite facies assemblages in the NCKFMASHTO (Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃) system, a series of P–T–X pseudosections based on the melt‐reintegrated composition of the Huangtuling felsic high‐pressure granulite were constructed. Calculations demonstrate that the orthopyroxene‐bearing, high‐pressure granulite facies assemblages are restricted to low X_Al [Al₂O₃/(Na₂O + CaO + K₂O + FeO + MgO + Al₂O₃) < 0.35, mole proportion] or high X_Mg [MgO/(MgO + FeO) > 0.85] felsic–metapelitic rock types. This study also reveals that the X_Al values in the residual felsic–metapelitic, high‐pressure granulites could be significantly reduced by a high proportion of melt loss. We suggest that orthopyroxene‐bearing, high‐pressure granulites occur in residual overthickened crustal basement under continental subduction–collision zones and arc–continent collision belts.     

Eclogites from the south Tianshan, NW China: petrological characteristic and calculated mineral equilibria in the Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O system

Eclogites from the south Tianshan, NW China are grouped into two types: glaucophane and hornblende eclogites, composed, respectively, of garnet + omphacite + glaucophane + paragonite + epidote + quartz and garnet + omphacite + hornblende (sensu lato) + paragonite + epidote + quartz, plus accessory rutile and ilmenite. These eclogites are diverse both in mineral composition and texture not only between the two types but also among the different selected samples within the glaucophane eclogite. Using thermocalc 3.1 and recent models of activity–composition relation for minerals, a P–T projection and a series of P–T pseudosections for specific samples of eclogite have been calculated in the system Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O (NCFMASH) with quartz and water taken to be in excess. On the basis of these phase diagrams, the phase relations and P–T conditions are well delineated. The three selected samples of glaucophane eclogite AK05, AK11 and AK17 are estimated to have peak P–T conditions, respectively, of 540–550 °C at c. 16 kbar, c. 560 °C at 15–17 kbar and c. 580 °C at 15–19 kbar, and two samples of hornblende eclogite AK10 and AK30 of 610–630 °C and 17–18 kbar. Together with H₂O‐content contours in the related P–T pseudosections and textural relations, both types of eclogite are inferred to show clockwise P–T paths, with the hornblende eclogite being transformed from the glaucophane eclogite assemblage dominantly through increasing temperature.     

Retrograde replacement of andalusite by Ca–Na mica in chloritoid-bearing metapelites. PTX modelling of rocks with different Al content in the MnNCKFMASH system

Andalusite porphyroblasts are totally pseudomorphosed by margarite–paragonite aggregates in aluminous pelites containing the peak mineral assemblage andalusite, chlorite, chloritoid, margarite, paragonite, quartz ± garnet, in a NW Iberia contact area. Equilibria at low P–T are investigated using new KFMASH and (mainly) MnCNKFMASH grids constructed with Thermocalc 3.21. P–T and T–X pseudosections with phase modal volume isopleths are constructed for compositions relatively richer and poorer in andalusite to model the assemblages in an andalusite‐bearing rock that contains a thin andalusite‐rich band (ARB) during retrogression. Their compositions, prior to retrogression, are used in the modelling, and have been retrieved by restoring the pseudomorph‐forming elements into the current‐depleted matrix, except for Al₂O₃ which is assumed to be immobile. Compositional differences between the thin band and the rest of the rock have not resulted in differences in andalusite porphyroblast retrogression. The absence of chloritoid resorbtion implies either a pressure increase at constant reacting‐system composition, or that its composition changed during retrogression at constant pressure, by becoming enriched in the progressively replaced andalusite porphyroblasts. T–X pseudosections at 1 kbar model this latter process using as end‐members in X, first, the restored original rock and ARB compositions, and, then the same process, taking into account the change in composition of both as retrogression proceeded. The MnNCKFMASH pseudosections of rocks with different Al contents facilitate making further deductions on the rock‐composition control of the resulting assemblages upon retrogression. Andalusite eventually disappears in relatively Al‐poor rocks, resulting, as in this study, in a rock formed by chloritoid–chlorite as the only FM minerals, plus margarite–paragonite pseudomorphs of andalusite. In rocks richer in Al, chlorite would progressively disappear and a kyanite/andalusite–chloritoid assemblage would eventually be stable at retrograde conditions. The Al‐silicate, stable during retrogression in Al‐rich rocks, indicates pressure conditions and hence the tectonic context under which retrogression took place.     

Polymetamorphic origin of muscovite+cordierite+staurolite+ biotite assemblages: implications for the metapelitic petrogenetic grid and for P–T paths

Metapelites containing muscovite, cordierite, staurolite and biotite (Ms+Crd+St+Bt) are relatively rare but have been reported from a number of low-pressure (andalusite–sillimanite) regional metamorphic terranes. Paradoxically, they do not occur in contact aureoles formed at the same low pressures, raising the question as to whether they represent a stable association. A stable Ms+Crd+St+Bt assemblage implies a stable Ms+Bt+Qtz+Crd+St+Al₂SiO₅+Chl+H₂O invariant point (IP1), the latter which has precluded construction of a petrogenetic grid for metapelites that reconciles natural phase relations at high and low pressure. Petrogenetic grids calculated from internally consistent thermodynamic databases do not provide a reliable means to evaluate the problem because the grid topology is sensitive to small changes in the thermodynamic data. Topological analysis of invariant point IP1 places strict limits on possible phase equilibria and mineral compositions for metamorphic field gradients at higher and lower pressure than the invariant point. These constraints are then compared with natural data from contact aureoles and reported Ms+Crd+St+Bt occurrences. We find that there are numerous topological, textural and compositional incongruities in reported natural assemblages that lead us to argue that Ms+Crd+St+Bt is either not a stable association or is restricted to such low pressures and Fe-rich compositions that it is rarely if ever developed in natural rocks. Instead, we argue that reported Ms+Crd+St+Bt assemblages are products of polymetamorphism, and, from their textures, are useful indicators of P–T  paths and tectonothermal processes at low pressure. A number of well-known Ms+Crd+St+Bt occurrences are discussed within this framework, including south-central Maine, the Pyrenees and especially SW Nova Scotia.     

Metamorphic evolution of low-T eclogite from the North Qilian orogen, NW China: evidence from petrology and calculated phase equilibria in the system NCKFMASHO

Low‐T eclogites in the North Qilian orogen, NW China share a common assemblage of garnet, omphacite, glaucophane, epidote, phengite, quartz and rutile with or without paragonite. Phase relations for the low‐T eclogites can be modelled well in the system NCKFMASHO with the updated solid‐solution models for amphibole and clinopyroxene. Garnet in the eclogite typically exhibits growth zonations in which pyrope increases while grossular somewhat decreases from core to rim, which is modelled as having formed mainly in the P–T conditions of lawsonite‐eclogite facies at the pre‐peak stage. Omphacite shows an increase in jadeite component as aegirine and also total FeO decrease in going from the inclusions in garnet to grains in the matrix, and from core to rim of zoned crystals, reflecting an increase in metamorphic P–T conditions. Glaucophane exhibits a compositional variation in X(gl) (= Fe²⁺/(Fe²⁺ + Mg)) and F(gl) (= Fe³⁺/(Fe³⁺ + Al) in M2 site), which decrease from the inclusions in garnet to crystals in the matrix, consistent with an increase in P–T conditions. However, for zoned matrix crystals, the X(gl) and F(gl) increase from core to rim, is interpreted to reflect a late‐stage decompression. Using composition isopleths for garnet rim and phengite in P–T pseudosections, peak P–T conditions for three samples Q5–45, Q5–01 and Q7–28 were estimated as 530–540 °C at 2.10–2.25 GPa, 580–590 °C at 2.30–2.45 GPa and 575–590 °C at 2.50–2.65 GPa, respectively, for the same assemblage garnet + omphacite + glaucophane + lawsonite (+ phengite + quartz + rutile) at the peak stage. The eclogites suggest similar P–T ranges to their surrounding felsic–pelitic schists. During post‐peak decompression of the eclogites, the most distinctive change involves the transformation of lawsonite to epidote, releasing large amount of water in the rock. The released fluid promoted further growth of glaucophane at the expense of omphacite and, in appropriate bulk‐rock compositions, paragonite formed. The decompression of eclogite did not lead to pronounced changes in garnet and phengite compositions. Peak P–T conditions of the North Qilian eclogite are well constrained using both the average P–T and pseudosection approaches in Thermocalc. Generally, the conventional garnet–clinopyroxene geothermometer is too sensitive to be used for constraining the temperature of low‐T eclogite because of the uncertainty in Fe³⁺ determination in omphacite and slight variations in mineral compositions because of incomplete equilibration.     

The interpretation of reaction textures in Fe‐rich metapelitic granulites of the Musgrave Block,central Australia: constraints from mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3

Fe‐rich metapelitic granulites of the Musgrave Block, central Australia, contain several symplectic and coronal reaction textures that post‐date a peak S2 metamorphic assemblage involving garnet, sillimanite, spinel, ilmenite, K‐feldspar and quartz. The earliest reaction textures involve spinel‐ and quartz‐bearing symplectites that enclose garnet and to a lesser extent sillimanite. The symplectic spinel and quartz are in places separated by later garnet and/or sillimanite coronas. The metamorphic effects of a later, D3, event are restricted to zones of moderate to high strain where a metamorphic assemblage of garnet, sillimanite, K‐feldspar, magnetite, ilmenite, quartz and biotite is preserved. Quantitative mineral equilibria calculations in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (KFMASHTO) using Thermocalc 3.0 and the accompanying internally consistent dataset provide important constraints on the influence of TiO₂ and Fe₂O₃ on biotite‐bearing and spinel‐bearing equilibria, respectively. Biotite‐bearing equilibria are shifted to higher temperatures and spinel‐bearing equilibria to higher pressures and lower temperatures in comparison to the equivalent equilibria in K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH). The sequence of reaction textures involving spinel is consistent with a D2 P–T path that involved a small amount of decompression followed predominantly by cooling within a single mineral assemblage stability field. Thus, the reaction textures reflect changes in modal proportions within an equilibrium assemblage rather than the crossing of a univariant reaction. The D3 metamorphic assemblage is consistent with lower temperatures than those inferred for D2.     

Metamorphic phase relations in orthopyroxene-bearing granitoids: implication for high-pressure metamorphism and prograde melting in the continental crust

In this work, the factors controlling the formation and preservation of high-pressure mineral assemblages in the metamorphosed orthopyroxene-bearing metagranitoids of the Sandmata Complex, Aravalli-Delhi Mobile Belt (ADMB), northwestern India have been modelled. The rocks range in composition from farsundite through quartz mangerite to opdalite, and with varying K₂O, Ca/(Ca + Na)_rock and FeO_tot + MgO contents. A two stage metamorphic evolution has been recorded in these rocks.
An early hydration event stabilized biotite with or without epidote at the expense of magmatic orthopyroxene and plagioclase. Subsequent high-pressure granulite facies metamorphism (∼15 kbar, ∼800 °C) of these hydrated rocks produced two rock types with contrasting mineralogy and textures. In the non-migmatitic metagranitoids, spectacular garnet ± K-feldspar ± quartz corona was formed around reacting biotite, plagioclase, quartz and/or pyroxene. In contrast, biotite ± epidote melting produced migmatites, containing porphyroblastic garnet incongruent solids and leucosomes.
Applying NCKFMASHTO T–M (H₂O) and P–T pseudosection modelling techniques, it is demonstrated that the differential response of these magmatic rocks to high-pressure metamorphism is primarily controlled by the scale of initial hydration. Rocks, which were pervasively hydrated, produced garnetiferous migmatites, while for limited hydration, the same metamorphism formed sub-solidus garnet-bearing coronae. Based on the sequence of mineral assemblage evolution and the mineral compositional zoning features in the two metagranitoids, a clockwise metamorphic P–T path is constrained for the high-pressure metamorphic event. The finding has major implications in formulating geodynamic model of crustal amalgamation in the ADMB.     

The effect of TiO2 and Fe2O3 on metapelitic assemblages at greenschist and amphibolite facies conditions: mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3

Mineral equilibria calculations in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (KFMASHTO) using thermocalc and its internally consistent thermodynamic dataset constrain the effect of TiO₂ and Fe₂O₃ on greenschist and amphibolite facies mineral equilibria in metapelites. The end‐member data and activity–composition relationships for biotite and chloritoid, calibrated with natural rock data, and activity–composition data for garnet, calibrated using experimental data, provide new constraints on the effects of TiO₂ and Fe₂O₃ on the stability of these minerals. Thermodynamic models for ilmenite–hematite and magnetite–ulvospinel solid solutions accounting for order–disorder in these phases allow the distribution of TiO₂ and Fe₂O₃ between oxide minerals and silicate minerals to be calculated. The calculations indicate that small to moderate amounts of TiO₂ and Fe₂O₃ in typical metapelitic bulk compositions have little effect on silicate mineral equilibria in metapelites at greenschist to amphibolite facies, compared with those calculated in KFMASH. The addition of large amounts of TiO₂ to typical pelitic bulk compositions has little effect on the stability of silicate assemblages; in contrast, rocks rich in Fe₂O₃ develop a markedly different metamorphic succession from that of common Barrovian sequences. In particular, Fe₂O₃‐rich metapelites show a marked reduction in the stability fields of staurolite and garnet to higher pressures, in comparison to those predicted by KFMASH grids.     

Metamorphic and structural evolution of the Early Proterozoic Puolankajärvi Formation, Finland – II. The pressure–temperature–deformation–composition path

The paragenetic relationships between sillimanite, andalusite, kyanite, chlorite, cordierite, biotite, garnet and staurolite in the Early Proterozoic Puolankajärvi Formation (PjF), together with mineral compositions, are used to construct a partial petrogenetic grid for metapelites with significant Mn content (MnO = 0.1–0.5%) by adding a six-phase invariant point over the garnet-absent invariant point for Mn-free AMF-phases.
The grid and textural relations of the PjF are used to construct part of the P–T –deformation path for the PjF. Relatively short deformation pulses and associated flow of oxidizing fluid along shear zones were responsible for the paragenetic and compositional changes during cooling and decompression at 600–500°C and 6.0–2.5 kbar. Oxidation led to decreased Fe²⁺ and further stressed the importance of Mn (increased Mn/divalent cations).
A tectonothermal evolution of the Kainuu Schist Belt is presented which includes crustal thinning and steepening of a previously established thermal gradient. This was followed by thrusting and folding of the isotherms into a thermal antiform on the western side of the belt.     

Contact metamorphic P–T–t paths from Sm–Nd garnet ages, phase equilibria modelling and thermobarometry: Garnet Ledge, south-eastern Alaska, USA

Sm–Nd garnet‐whole rock geochronology, phase equilibria, and thermobarometry results from Garnet Ledge, south‐eastern Alaska, provide the first precisely constrained P–T–t path for garnet zone contact metamorphism. Garnet cores from two crystals and associated whole rocks yield a four point isochron age for initial garnet growth of 89.9 ± 3.6 Ma. Garnet rims and matrix minerals from the same samples yield a five point isochron age for final garnet growth of 89 ± 1 Ma. Six size fractions of zircon from the adjacent pluton yield a concordant U–Pb age of 91.6 ± 0.5 Ma. The garnet core and rim, and zircon ages are compatible with single‐stage garnet growth during and/or after pluton emplacement. All garnet core–whole rock and garnet rim‐matrix data from the two samples constrain garnet growth duration to ≤5.5 my. A garnet mid‐point and the associated matrix from one of the two garnet crystals yield an age of 90.0 ± 1.0 Ma. This mid‐point result is logically younger than the 90.7 ± 5.6 Ma core–whole rock age and older than the 88.4 ± 2.5 Ma rim‐matrix age for this sample. A MnNaCaKFMASH phase diagram (P–T pseudosection) and the garnet core composition are used to predict that cores of garnet crystals grew at 610 ± 20 °C and 5 ± 1 kbar. This exceeds the temperature of the garnet‐in reaction by c. 50 °C and is compatible with overstepping of the garnet growth reaction during contact metamorphism. Intersection of three reactions involving garnet‐biotite‐sillimanite‐plagioclase‐quartz calculated by THERMOCALC in average P–T mode, and exchange thermobarometry were used to estimate peak metamorphic conditions of 678 ± 58 °C at 6.1 ± 0.9 kbar and 685 ± 50 °C at 6.3 ± 1 kbar, respectively. Integration of pressure, temperature, and age estimates yields a pressure‐temperature‐time path compatible with near isobaric garnet growth over an interval of c. 70 °C and c. 2.3 my.     

Thermodynamic modelling of the reaction muscovite+cordierite→Al2SiO5+biotite+quartz+ H2O: constraints from natural assemblages and implications for the metapelitic petrogenetic grid

The reaction muscovite+cordierite→biotite+Al₂SiO₅ +quartz+H₂O is of considerable importance in the low pressure metamorphism of pelitic rocks: (1) its operation is implied in the widespread assemblage Ms + Crd +And± Sil + Bt + Qtz, a common mineral assemblage in contact aureoles and low pressure regional terranes; (2) it is potentially an important equilibrium for pressure estimation in low pressure assemblages lacking garnet; and (3) it has been used to distinguish between clockwise and anticlockwise P–T paths in low pressure metamorphic settings. Experiments and thermodynamic databases provide conflicting constraints on the slope and position of the reaction, with most thermodynamic databases predicting a positive slope for the reaction. Evidence from mineral assemblages and microtextures from a large number of natural prograde sequences, in particular contact aureoles, is most consistent with a negative slope (andalusite and/or sillimanite occurs upgrade of, and may show evidence for replacement of, cordierite). Mineral compositional trends as a function of grade are variable but taken as a whole are more consistent with a negative slope than a positive slope. Thermodynamic modelling of reaction 1 and associated equilibria results in a low pressure metapelitic petrogenetic grid in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH) which satisfies most of the natural and experimental constraints. Contouring of the Fe–Mg divariant interval represented by reaction 1 allows for pressure estimation in garnet‐absent andalusite+cordierite‐bearing schists and hornfelses. The revised topology of reaction 1 allows for improved analysis of P–T paths from mineral assemblage sequences and microtextures in the same rocks.     

Chloritoid–glaucophane schist in the north Qilian orogen, NW China: phase equilibria and P–T path from garnet zonation

Chloritoid–glaucophane‐bearing rocks are widespread in the high‐pressure belt of the north Qilian orogen, NW China. They are interbedded and cofacial with felsic schists originated from greywackes, mafic garnet blueschists and low‐T eclogites. Two representative chloritoid–glaucophane‐bearing assemblages are chloritoid + glaucophane + garnet + talc + quartz (sample Q5‐49) and chloritoid + glaucophane + garnet + phengite + epidote + quartz (sample Q5‐12). Garnet in sample Q5‐49 is coarse‐, medium‐ and fine‐grained and shows two types of zonation patterns. In pattern I, X_grs is constant as X_py rises, and in pattern II X_grs decreases as X_py rises. Phase equilibrium modelling in the NC(K)MnFMASH system with Thermocalc 3.25 indicates that pattern I can be formed during progressive metamorphism in lawsonite‐stable assemblages, while pattern II zonation can be formed with further heating after lawsonite has been consumed. Garnet growth in Q5‐49 is consistent with a continuous progressive metamorphic process from ～14.5 kbar at 470 °C to ～22.5 kbar at 560 °C. Garnet in sample Q5‐12 develops with pattern I zonation, which is consistent with a progressive metamorphic process from ～21 kbar at 540 °C to ～23.5 kbar at 580 °C with lawsonite present in the whole garnet growth. The latter sample shows the highest P–T conditions of the reported chloritoid–glaucophane‐bearing assemblages. Phase equilibrium calculation in the NCKFMASH system with a recent mixing model of amphibole indicates that chloritoid + glaucophane paragenesis does not have a low‐pressure limit of 18–19 kbar as previously suggested, but has a much larger pressure range from 7–8 to 27–30 kbar, with the low‐pressure part being within the stability field of albite.     

Impure marbles from the UHP Brossasco-Isasca Unit (Dora-Maira Massif, western Alps): evidence for Alpine equilibration in the diamond stability field and evaluation of the X(CO2) fluid evolution

Two impure ultrahigh-pressure (UHP) marbles, a calcite marble with the peak assemblage Grt + Phe + Cpx + Rt + (Arg) and a dolomite marble with the peak assemblage Crn + Chl + Rt + Dol (±Arg), from the same lens from the polymetamorphic complex of the Brossasco-Isasca Unit (BIU) (southern Dora-Maira Massif) have been petrologically investigated and modelled by calculating P – T phase-diagram projections for H₂O–CO₂ mixed-volatile systems. Thermobarometric data obtained from the calcite marble suggest Alpine peak conditions in the diamond stability field (4.0 GPa at 730 °C), and allow reconstruction of the earlier portion of the Alpine retrograde P – T path, which is characterized by a significant decompression coupled with a moderate and continuous cooling to 650 °C at 2.50 GPa. The modelled fluid compositions at peak conditions point to 0.025 ≤  X (CO₂) ≤ 0.10 and X (CO₂) ≤ 0.0012 in the calcite marble and dolomite marble, respectively, suggesting fluid heterogeneity at the local scale and an internally buffered fluid evolution of the studied impure marbles. The lack of micro-diamond in the BIU marbles is explained by the very-low X (CO₂) values, which favoured relatively high f O₂-conditions, preventing the formation of diamond at the UHP peak metamorphic conditions.     

Evolution of Moldanubian rocks in Austria: review and synthesis

The Moldanubian zone in Austria comprises three major lithological units. Despite general agreement that nappe tectonics contributed to its current structure, the number and position of tectonic boundaries, or continental pieces that were involved in its evolution, as well as the age, extent and position of oceanic sutures are disputed. Recent models ascribe the Moldanubian tectonostratigraphic structure to its oblique, N- to NE-directed collision with Moravia only. The rocks of the Moldanubian Bunte series and Gföhl unit experienced a common, intensive overprint in the range 700–800 °C and 8–11 kbar. Textural evidence suggests that this overprint was attained during nearly isothermal decompression, so the rocks experienced higher pressures prior to this overprint. These conditions constrain a continent–continent collision environment that contributed to the formation of the Moldanubian granulites. The estimated metamorphic temperatures are close to T_max. During this Hercynian, high-T overprint, the minerals underwent extensive diffusion-controlled homogenization of elements. The early stages of retrogression of these units were characterized by isobaric cooling at c. 6 kbar in the range 650–500 °C that is related to the oblique collision of the Moldanubian and Moravian zones. Cooling to c. 400 °C is demonstrated by unstrained, diasporized corundum inclusions in garnet of common Moldanubian granulites. The available age data (including cooling ages) from metamorphic rocks show a very wide variation between 490 and 280 Ma that depends on sample characteristics and the dating method used. They demonstrate clearly, however, that the metamorphic overprint is Hercynian. The possibility that the large variation in ages reflects homogenization, resetting and closure of the isotopic systems attained at different, sample- and method-specific times is discussed. Age data varying between c. 370 and c. 346 Ma tentatively date different stages during the Hercynian, high-T decompression. The majority of zircon and monazite U/Pb ages as well as the hornblende and muscovite Ar/Ar cooling ages cluster between c. 345 and c. 326 Ma and date the effective closure conditions and the onset of rapid, nearly isobaric cooling. The continent–continent collision that formed the granulites pre-dates c. 370 Ma. The intra-Moldanubian nappe-stacking pre-dates thrusting of the Moldanubian zone over the Moravian zone. The range c. 340–335 Ma is the lower limit for completion of tectonic activity in the Moldanubian zone. The Moldanubian series are post-tectonically intruded by granitoids of the Southern Bohemian Pluton. Recent age determinations and geochemical evidence suggest that the formation of the early granitoid types took place in the lower crust in connection with the Hercynian high-grade overprint. The Moldanubian Monotone series in Austria is separated from the other Moldanubian units by a conspicuous tectonic horizon. It also differs from them by its characteristic high-T , low-P overprint, which is best demonstrated by a widespread cordierite gneiss.     

Reactive flow of mixed CO2–H2O fluid and progress of calc-silicate reactions in contact metamorphic aureoles: insights from two-dimensional numerical modelling

Previous models of hydrodynamics in contact metamorphic aureoles assumed flow of aqueous fluids, whereas CO₂ and other species are also common fluid components in contact metamorphic aureoles. We investigated flow of mixed CO₂–H₂O fluid and kinetically controlled progress of calc‐silicate reactions using a two‐dimensional, finite‐element model constrained by the geological relations in the Notch Peak aureole, Utah. Results show that CO₂ strongly affects fluid‐flow patterns in contact aureoles. Infiltration of magmatic water into a homogeneous aureole containing CO₂–H₂O sedimentary fluid facilitates upward, thermally driven flow in the inner aureole and causes downward flow of the relatively dense CO₂‐poor fluid in the outer aureole. Metamorphic CO₂‐rich fluid tends to promote upward flow in the inner aureole and the progress of devolatilization reactions causes local fluid expulsion at reacting fronts. We also tracked the temporal evolution of P‐T‐X_CO2conditions of calc‐silicate reactions. The progress of low‐ to medium‐grade (phlogopite‐ to diopside‐forming) reactions is mainly driven by heat as the CO₂ concentration and fluid pressure and temperature increase simultaneously. In contrast, the progress of the high‐grade wollastonite‐forming reaction is mainly driven by infiltration of chemically out‐of‐equilibrium, CO₂‐poor fluid during late‐stage heating and early cooling of the inner aureole and thus it is significantly enhanced when magmatic water is involved. CO₂‐rich fluid dominates in the inner aureole during early heating, whereas CO₂‐poor fluid prevails at or after peak temperature is reached. Low‐grade metamorphic rocks are predicted to record the presence of CO₂‐rich fluid, and high‐grade rocks reflect the presence of CO₂‐poor fluid, consistent with geological observations in many calc‐silicate aureoles. The distribution of mineral assemblages predicted by our model matches those observed in the Notch Peak aureole.     

Two-stage decompression in orthopyroxene–sillimanite granulites from Forefinger Point, Enderby Land, Antarctica: implications for the evolution of the Archaean Napier Complex

Magnesian metapelites of probable Archaean age from Forefinger Point, SW Enderby Land, East Antarctica, contain very-high-temperature granulite facies mineral assemblages, which include orthopyroxene (8–9.5 wt% Al₂O₃)–sillimanite ± garnet ± quartz ± K-feldspar, that formed at 10 ± 1.5 kbar and 950 ± 50°C. These assemblages are overprinted by symplectite and corona reaction textures involving sapphirine, orthopyroxene (6–7 wt% Al₂O₃), cordierite and sometimes spinel at the expense of porphyroblastic garnet or earlier orthopyroxene–sillimanite. These textures mainly pre-date the development of coarse biotite at the expense of initial mesoperthite, and the subsequent formation of orthopyroxene (4–6 wt% Al₂O₃)–cordierite–plagioclase rinds on late biotite.
The early reaction textures indicate a period of near-isothermal decompression at temperatures above 900°C. Decompression from 10 ± 1.5 kbar to 7–8 kbar was succeeded by biotite formation at significantly lower temperatures (800–850°C) and further decompression to 4.5 ± 1 kbar at 700–800°C.
The later parts of this P–T evolution can be ascribed to the overprinting and reworking of the Forefinger Point granulites by the Late-Proterozoic ( c . 1000 Ma) Rayner Complex metamorphism, but the age and timing of the early high-temperature decompression is not known. It is speculated that this initial decompression is of Archaean age and therefore records thinning of the crust of the Napier Complex following crustal thickening by tectonic or magmatic mechanisms and preceding the generally wellpreserved post-deformational near-isobaric cooling history of this terrain.     

Calculated mineral equilibria for eclogites in CaO–Na2O–FeO–MgO–Al2O3–SiO2–H2O: application to the Pouébo Terrane, Pam Peninsula, New Caledonia

The high- P , medium- T  Pouébo terrane of the Pam Peninsula, northern New Caledonia includes barroisite- and glaucophane-bearing eclogite and variably rehydrated equivalents. The metamorphic evolution of the Pouébo terrane is inferred from calculated P–T  and P–T  – X H2O pseudosections for bulk compositions appropriate to these rocks in the model system CaO–Na₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O. The eclogites experienced a clockwise P–T  path that reached P ≈19  kbar and T  ≈600  °C. The eclogitic mineral assemblages are preserved because reaction consequent upon decompression consumed the rocks' fluid. Extensive reaction occurred only in rocks with fluid influx during decompression of the Pouébo terrane.     

Cretaceous high-P granulites at Milford Sound, New Zealand: metamorphic history and emplacement in a convergent margin setting

Granulite facies orthogneiss of the Arthur River Complex (ARC) at Milford Sound, western Fiordland records a complex Early Cretaceous magmatic and orogenic history for the Pacific Gondwana margin that culminated in the emplacement and burial of a dioritic batholith, the Western Fiordland Orthogneiss (WFO). Enstatite-bearing mafic to intermediate protoliths of the ARC and WFO intruded the middle to upper crust. The early deformation history of the ARC is preserved in the Pembroke Granulite, where two-pyroxene S1 assemblages that reflect P <8 kbar and T  >750 °C were only patchily recrystallized during later deformation. S1 is cut by garnet-bearing, leucogabbroic to dioritic veins, which are cut by distinctive D2 fractures involving anorthositic veins and garnet–diopside–plagioclase-bearing reaction zones. These zones are widespread in the ARC and WFO and record conditions of P ≈14 kbar and T  >750 °C. Garnet–clinopyroxene-bearing corona reaction textures that mantle enstatite in both the ARC and WFO reflect Early Cretaceous burial by approximately 25 km of continental crust. Most of the ARC is formed from the Milford and Harrison Gneisses, which contain steeply dipping S4 assemblages that envelop the Pembroke Granulite and involve garnet, hornblende, diopside, clinozoisite, rutile and plagioclase, with or without kyanite. The P–T history of rocks in western Fiordland reflects pronounced Early Cretaceous convergence-related tectonism and burial, possibly related to the collision and accretion of island arc material onto the Pacific Gondwana margin.     

Contrasting metamorphic histories of lenses of high‐pressure rocks and host migmatites with a flat orogenic fabric (Bohemian Massif,Czech Republic): a result of tectonic mixing within horizontal crustal flow?

Migmatites with sub‐horizontal fabrics at the eastern margin of the Variscan orogenic root in the Bohemian Massif host lenses of eclogite, kyanite‐K‐feldspar granulite and marble within a matrix of migmatitic paragneiss and amphibolite. Petrological study and pseudosection modelling have been used to establish whether the whole area experienced terrane‐wide exhumation of lower orogenic crust, or whether smaller portions of higher‐pressure lower crust were combined with a lower‐pressure matrix. Kyanite‐K‐feldspar granulite shows peak conditions of 16.5 kbar and 850 °C with no clear indications of prograde path, whereas in the eclogite the prograde path indicates burial from 10 kbar and 700 °C to a peak of 18 kbar and 800 °C. Two contrasting prograde paths are identified within the host migmatitic paragneiss. The first path is inferred from the presence of staurolite and kyanite inclusions in garnet that contains preserved prograde zoning that indicates burial with simultaneous heating to 11 kbar and 800 °C. The second path is inferred from garnet overgrowths of a flat foliation defined by sillimanite and biotite. Garnet growth in such an assemblage is possible only if the sample is heated at 7–8 kbar to around 700–840 °C. Decompression is associated with strong structural reworking in the flat fabric that involves growth of sillimanite in paragneiss and kyanite‐K‐feldspar granulite at 7–10 kbar and 750–850 °C. The contrasting prograde metamorphic histories indicate that kilometre‐scale portions of high‐pressure lower orogenic crust were exhumed to middle crustal levels, dismembered and mixed with a middle crustal migmatite matrix, with the simultaneous development of a flat foliation. The contrasting P–T paths with different pressure peaks show that tectonic models explaining high‐pressure boudins in such a fabric cannot be the result of heterogeneous retrogression during ductile rebound of the whole orogenic root. The P–T paths are compatible with a model of heterogeneous vertical extrusion of lower crust into middle crust, followed by sub‐horizontal flow.     

Constraining peak P–T conditions in UHP eclogites: calculated phase equilibria in kyanite‐ and phengite‐bearing eclogite of the Tromsø Nappe,Norway

Kyanite‐ and phengite‐bearing eclogites have better potential to constrain the peak metamorphic P–T conditions from phase equilibria between garnet + omphacite + kyanite + phengite + quartz/coesite than common, mostly bimineralic (garnet + omphacite) eclogites, as exemplified by this study. Textural relationships, conventional geothermobarometry and thermodynamic modelling have been used to constrain the metamorphic evolution of the Tromsdalstind eclogite from the Tromsø Nappe, one of the biggest exposures of eclogite in the Scandinavian Caledonides. The phase relationships demonstrate that the rock progressively dehydrated, resulting in breakdown of amphibole and zoisite at increasing pressure. The peak‐pressure mineral assemblage was garnet + omphacite + kyanite + phengite + coesite, inferred from polycrystalline quartz included in radially fractured omphacite. This omphacite, with up to 37 mol.% of jadeite and 3% of the Ca‐Eskola component, contains oriented rods of silica composition. Garnet shows higher grossular (X_Grs = 0.25–0.29), but lower pyrope‐content (X_Prp = 0. 37–0.39) in the core than the rim, while phengite contains up to 3.5 Si pfu. The compositional isopleths for garnet core, phengite and omphacite constrain the P–T conditions to 3.2–3.5 GPa and 720–800 °C, in good agreement with the results obtained from conventional geothermobarometry (3.2–3.5 GPa & 730–780 °C). Peak‐pressure assemblage is variably overprinted by symplectites of diopside + plagioclase after omphacite, biotite and plagioclase after phengite, and sapphirine + spinel + corundum + plagioclase after kyanite. Exhumation from ultrahigh‐pressure (UHP) conditions to 1.3–1.5 GPa at 740–770 °C is constrained by the garnet rim (X_Ca^Grt = 0.18–0.21) and symplectite clinopyroxene (X_Na^Cpx = 0.13–0.21), and to 0.5–0.7 GPa at 700–800 °C by sapphirine (X_Mg = 0.86–0.87) and spinel (X_Mg = 0.60–0.62) compositional isopleths. UHP metamorphism in the Tromsø Nappe is more widespread than previously known. Available data suggest that UHP eclogites were uplifted to lower crustal levels rapidly, within a short time interval (452–449 Ma) prior to the Scandian collision between Laurentia and Baltica. The Tromsø Nappe as the highest tectonic unit of the North Norwegian Caledonides is considered to be of Laurentian origin and UHP metamorphism could have resulted from subduction along the Laurentian continental margin. An alternative is that the Tromsø Nappe belonged to a continental margin of Baltica, which had already been subducted before the terminal Scandian collision, and was emplaced as an out‐of‐sequence thrust during the Scandian lateral transport of nappes.