Imaging glacial sediment inclusions in 3‐D using ground‐penetrating radar at Kongsvegen,Svalbard

The quiescent‐phase surge‐type glacier, Kongsvegen, flows confluent with the continuously fast‐flowing Kronebreen in northwestern Spitsbergen. The lower regions of Kongsvegen overlie glaciomarine sediments, which have been incorporated into the ice during multiple surge events. The resulting englacial structures are exposed at the surface and on a cliff section. These structures have variously been interpreted as thrusts, formed by compression, or sediment‐filled crevasses, formed by extension. We collected a grid of closely spaced ground‐penetrating radar profiles in the area adjacent to the cliff section. Several structures were imaged in 3‐D, including a strong subhorizontal basal reflector, which was underlain by a second, weaker subhorizontal reflector. The basal reflector was occasionally reverse faulted, suggesting compression. Clear englacial features extended upwards from it, dipping up‐glacier at angles of <40° and steepening towards the glacier surface; they had complex geometries that changed rapidly cross‐glacier. The structures were orientated at ～30° to ice flow, suggesting modification by lateral compression from Kronebreen. Some of these englacial structures clearly crossed the basal reflector. We conclude that the englacial features imaged are not likely to be derived from crevasse filling and were probably formed by thrusting. The results contribute to our understanding of surge initiation and termination processes, and interpretation of features in the palaeorecord. Copyright © 2009 John Wiley & Sons, Ltd.     

Depositional processes beneath coastal multi‐year sea ice

The extent of multi‐year sea ice impacts climate processes worldwide, such as ocean–atmosphere carbon dioxide exchange and deep ocean current formation. Reconstructing these processes in the past, and assessing the distribution of ecologically and climatically significant features, such as polynas, requires recognition of sediments deposited under multi‐year sea ice, but little is known about their characteristics. Textural analysis of subaerial and sea floor sediment in Explorers Cove, McMurdo Sound, at the mouth of Taylor Valley, Antarctica, augmented with observations of sedimentary structures and faunal components, elucidates how sediment is transported to the sea floor and allows characterization of the deposits. Comparison of grain‐size characteristics of subaerial (moraine, delta and sea‐ice surface) sediment and sea floor sediment from short cores taken at depths of 7 to 25 m indicates that the likely source of the moderately to poorly sorted sea floor sand is deltaic sediment; small glacial meltwater streams have built deltas since Taylor Valley became ice‐free ca 7000 years ago. Windblown sediment accumulating on the multi‐year sea ice close to the coast typically is coarser grained than sediment on the sea floor; this suggests that the transport of sediment through the ice to the sea floor is not the predominant mode of sediment transfer. However, supra‐sea‐ice sediment does move to the sea floor through local fractures. The rate of sedimentation under multi‐year sea ice is low because of limited stream flow and biogenic sedimentation; the ice cover inhibits primary productivity and dampens waves, precluding physical re‐suspension. The upper centimetres of sea floor sediment are churned by epifaunal scallops and brittle stars that leave no telltale biogenic structures and whose calcite ossicles and shells may be poorly preserved. The resulting deposits under multi‐year sea ice are poorly sorted, massive sand that provides little evidence of the bioturbators that have masked the indicators of the original physical depositional processes.     

Glacial advance,occupation and retreat sediments associated with multi‐stage ice‐dammed lakes: north‐central Alberta,Canada

Ice sheets that advance upvalley, against the regional gradient, commonly block drainage and result in ice‐dammed proglacial lakes along their margins during advance and retreat phases. Ice‐dammed glacial lakes described in regional depositional models, in which ice blocks a major lake outlet, are often confined to basins in which the glacial lake palaeogeographical position generally remains semi‐stable (e.g. Great Lakes basins). However, in places where ice retreats downvalley, blocking regional drainage, the palaeogeographical position and lake level of glacial lakes evolve temporally in response to the position of the ice margin (referred to here as ‘multi‐stage’ lakes). In order to understand the sedimentary record of multi‐stage lakes, sediments were examined in 14 cored boreholes in the Peace and Wabasca valleys in north‐central Alberta, Canada. Three facies associations (FAI–III) were identified from core, and record Middle Wisconsinan ice‐distal to ice‐proximal glaciolacustrine (FAI) sediments deposited during ice advance, Late Wisconsinan subglacial and ice‐marginal sediments (FAII) deposited during ice‐occupation, and glaciolacustrine sediments (FAIII) that record ice retreat from the study area. Modelling of the lateral extent of FAs using water wells and gamma‐ray logs, combined with interpreted outlets and mapped moraines based on LiDAR imagery, facilitated palaeogeographical reconstruction of lakes and the identification of four major retreat‐phase lake stages. These lake reconstructions, together with the vertical succession of FAs, are used to develop a depositional model for ice‐dammed lakes during a cycle of glacial advance and retreat. This depositional model may be applied in other areas where meltwater was impounded by glacial ice advancing up the regional gradient, in order to understand the complex interaction between depositional processes, ice‐marginal position, and supply of meltwater and sediment in the lake basin. In particular, this model could be applied to decipher the genetic origin of diamicts previously interpreted to record strictly subglacial deposition or multiple re‐advances.     

The Punjab foreland basin of Pakistan: a reinterpretation of zircon fission‐track data in the light of Miocene hinterland dynamics

Sedimentary basins represent an archive of tectonic events of the hinterland source regions. By determining the variation in sediment lagtime over time, events can be distinguished which may no longer be available as the source has been eroded. In regions characterized by rapid exhumation this is most often the case but the erosion products form a record of these events. Detrital zircon fission‐track ages from sediments of the Siwalik basin, Pakistan, originally presented by Cerveny et al. (New Perspectives in Basin Analysis, Springer‐Verlag, New York, 1988, p. 43), have been reinvestigated and reinterpreted using a revised methodological approach. Detrital age populations were determined from different stratigraphic levels and were correlated through time in order to assess the change in lag time over the stratigraphic section. This information was combined with the many new ages from the hinterland to further interpret events in the source region. The new investigation suggests that steady‐state evolution has not always existed. An overall trend of exhumation increasing by 0.1 mm Myr^?1 (from 0.9 to 2.65 mm yr^?1) from 18 Ma to the present is evident with a major exception of a net pulse between 11.7 and 10.9 Ma associated with an increase in sedimentation increasingly rich in hornblende. Earlier studies suggested that at this time the source of the sediments was the presently outcropping Kohistan Arc. We are able to demonstrate that this cannot be so but was rather the rapidly exhuming Nanga‐Parbat Haramosh syntaxis (> 2 mm yr^?1) coevally with transpressional displacement along the Main Karakorum Thrust, whereby the overlying Kohistan Arc sequences were removed. Furthermore, comparison of our detrital thermochronological data set with another one from the same basin and one from another foreland basin to the east, in NW India suggest that the Himalayan orogenesis was probably not synchronous for the late Early–Middle Miocene. Overall, regions that undergoes today's rapid uplift may be useless to reconstruct earlier phases of exhumation as the levels that may have yielded such info were eroded and deposited into the adjacent basin(s). Such scenario is reproducible in most orogens as in the Himalaya in NW Pakistan stressing the high potential of detrital thermochronological studies to trace hinterland dynamics. Terra Nova, 18, 248–256, 2006     

Soft‐sediment deformation structures in a Pleistocene glaciolacustrine delta and their implications for the recognition of subenvironments in delta deposits

The development of soft‐sediment deformation structures in clastic sediments is now reasonably well‐understood but their development in various deltaic subenvironments is not. A sedimentological analysis of a Pleistocene (ca 13·1 to 15 ¹⁰Be ka) Gilbert‐type glaciolacustine delta with gravity‐induced slides and slumps in the Mosty‐Danowo tunnel valley (north‐western Poland) provides more insight, because the various soft‐sediment deformation structures in these deposits were considered in the context of their specific deltaic subenvironment. The sediments show three main groups of soft‐sediment deformation structures in layers between undeformed sediments. The first group consists of deformed cross‐bedding (inclined, overturned, recumbent, complex and sheath folds), large‐scale folds (recumbent and sheath folds) and pillows forming plastic deformations. The second group comprises pillar structures (isolated and stress), clastic dykes with sand volcanoes and clastic megadykes as examples of water‐escape structures. The third group consists of faults (normal and reverse) and extensional fissures (small fissures and neptunian dykes). Some of the deformations developed shortly after deposition of the deformed sediment, other structures developed later. This development must be ascribed to hydroplastic movement in a quasi‐solid state, and due to fluidization and liquefaction of the rapidly deposited, water‐saturated deltaic sediments. The various types of deformations were triggered by: (i) a high sedimentation rate; (ii) erosion (by wave action or meltwater currents); and (iii) ice‐sheet loading and seasonal changes in the ablation rate. Analysis of these triggers, in combination with the deformational mechanisms, have resulted – on the basis of the spatial distribution of the various types of soft‐sediment deformation structures in the delta under study – in a model for the development of soft‐sediment deformation structures in the topsets, foresets and bottomsets of deltas. This analysis not only increases the understanding of the deformation processes in both modern and ancient deltaic settings but also helps to distinguish between the various subenvironments in ancient deltaic deposits.     

Zircon fission‐track ages from Newfoundland—A proxy for high geothermal gradients and exhumation before opening of the Central Atlantic Ocean

Following Appalachian orogenesis, metamorphic rocks in central Newfoundland were exhumed and reburied under Tournaisian strata. New zircon fission‐track (ZFT) ages of metamorphic rocks below the Tournaisian unconformity yield post‐depositionally reset ages of 212–235 Ma indicating regional fluid‐absent reheating to at least ≥220°C. Post‐Tournaisian sedimentary thicknesses in surrounding basins show that burial alone cannot explain such temperatures, thus requiring that palaeo‐geothermal gradients increased to ≥30–40°C/km before final late Triassic accelerated cooling. We attribute these elevated palaeo‐geothermal gradients to localized thermal blanketing by insulating sediments overlying radiogenic high‐heat‐producing granitoids. Late Triassic rifting and magmatism before break up of Pangaea likely also contributed to elevated heat flow, as well as uplift, triggering late Triassic accelerated cooling and exhumation. Thermochronological ages of 240–200 Ma are seen throughout Atlantic Canada, and record rifting and basaltic magmatism on the conjugate margins of the Central Atlantic Ocean preceding the onset of oceanic spreading at ~190 Ma.     

Alpine tectono‐metamorphic history of the continental units from Vardar zone: the Kopaonik Metamorphic Complex (Dinaric‐Hellenic belt,Serbia)

The easternmost zone of the Dinaric‐Hellenic belt is represented by the Vardar Zone, in which the Kopaonik Metamorphic Complex (KMC) is regarded as the lowermost unit. This complex is topped by the unmetamorphosed Brzece unit and is intruded by the Oligocene Kopaonik Intrusive complex. The KMC is characterized by a stratigraphy that includes metapelites and meta‐carbonates of Late Triassic age, associated with metabasites. It is characterized by a complex deformation history that comprises four phases: D1 to D4. The D1 phase structures occur only as relict structures, whereas the D2 phase structures are represented by isoclinal F2 folds, associated with a well‐developed S2 foliation. The estimated P‐T conditions for the D1 and D2 metamorphism are consistent with the upper greenschist facies. The D3 phase is characterized by west‐verging thrusts associated with upright folds. In contrast, the D4 phase is characterized by open folds (F4) associated with low‐angle normal faults. The D1 and D2 deformation phases developed during the shortening related to continental collision, whereas the subsequent D3 and D4 phases can be related to the progressive exhumation of the KMC. The D4 phase probably developed during extensional tectonics during and after emplacement of the Kopaonik Intrusive Complex. The data show that the continental units belonging to the Vardar zone had a long‐lived deformation history that was more complex that previously thought. Copyright © 2009 John Wiley & Sons, Ltd.     

Petrogenesis and deformation history of the lawsonite‐bearing blueschist facies metabasalts of the Diamante‐Terranova oceanic unit (southern Italy)

The Neotethyan oceanic Diamante‐Terranova unit (DIATU; southern Apennines–Calabria–Peloritani Terrane system) includes basic rocks that during the Cenozoic were subducted and metamorphosed to lawsonite‐blueschist facies conditions. Petrological and structural observations (both at the meso‐ and micro‐scale) show that lawsonite growth was continuous during three distinctive ductile deformation stages (D1–D3). These likely occurred close to the metamorphic peak, estimated at 350–390°C and 0.9–1.1 GPa, producing an equilibrium assemblage made of blue Na‐amphibole, lawsonite, chlorite and pumpellyite. Locally, pods dominated by quartz and epidote (plus chlorite, calcite and green Ca‐amphibole) developed at similar conditions (350–370°C, 0.8–0.9 GPa). Post‐peak evolution during the final exhumation of the DIATU along the subduction channel, also consisted of three deformation stages, defined by folding (D4) and normal faulting (D5) and finally by strike‐slip faulting (D6), affecting both the blueschist unit and the unconformably overlying Tortonian conglomerates. Vorticity analysis on syn‐tectonic lawsonite crystals indicates that severe flattening occurred during the D2 stage, with a significant secondary non‐coaxial strain component along the W–E plane. This is associated with an eastward tectonic vergence, consistent with the subsequent D3 and D4 folding stages characterized by a dominant ENE tectonic transport. It is suggested that exhumation started from the D2 stage and continued during D3 at similar HP/LT metamorphic conditions. The widespread occurrence of unreacted lawsonite crystals suggests that exhumation was very fast and supports the idea that concurrent ductile deformation might play a role in its preservation.     

Dynamics of Saxothuringian subduction channel/wedge constrained by phase‐equilibria modelling and micro‐fabric analysis

Subduction and exhumation dynamics can be investigated through analysis of metamorphic and deformational evolution of associated high‐grade rocks. The Erzgebirge anticline, which forms at the boundary between the Saxothuringian and Teplá‐Barrandian domains of the Bohemian Massif, provides a useful study area for these processes owing to the occurrence of numerous meta‐basites preserving eclogite facies assemblages, and coesite and diamond bearing quartzofeldspathic lithologies indicating subduction to deep mantle depths. The prograde and retrograde evolution of meta‐basite from the Czech portion of the Erzgebirge anticline has been constrained through a combination of thermodynamic modelling and conventional thermobarometry. Garnet growth zoning indicates that the rocks underwent burial and heating to peak conditions of 2.6 GPa and at least 615 °C. Initial exhumation occurred with concurrent cooling and decompression resulting in the growth of amphibole and zoisite poikiloblasts overgrowing and including the eclogite facies assemblage. The development of clinopyroxene–plagioclase–amphibole symplectites after omphacite and Al‐rich rims on matrix amphibole indicate later heating at the base of the lower crust. Omphacite microstructures, in particular grain size analysis and lattice‐preferred orientations, indicate that the prograde evolution was characterized by a constrictional strain geometry transitioning into plane strain and oblate fabrics during exhumation. The initial constrictional strain pattern is interpreted as being controlled by competing slab pull and crustal buoyancy forces leading to necking of the subducting slab. The transition to plane strain and flattening geometries represents transfer of material from the subducting lithosphere into a subduction channel, break‐off of the dense slab and rebound of the buoyant crustal material.     

Provenance analysis as a key to orogenic exhumation: a case study from the East Carpathians (Romania)

Provenance analysis of the sediments from foredeep basins is crucial in understanding the contemporaneous orogenic exhumation processes. We report in this paper complex sediment provenance analysis using sandstone petrography and mudstone geochemistry, combined with magnetic susceptibility of the Upper Miocene to Pliocene deposits from Focşani foredeep basin (Romania). Data show a change of source area between 5 and 6 Ma, from an active volcanic arc towards a recycled orogenic belt, concurrent with an important increase of accumulation rate. This change was triggered by exhumation and erosion of the outer nappes from East Carpathians.     

Post-mid-Cretaceous eastern North Sea evolution inferred from 3D thermo-mechanical modelling

The Late Cretaceous–Cenozoic evolution of the eastern North Sea region is investigated by 3D thermo-mechanical modelling. The model quantifies the integrated effects on basin evolution of large-scale lithospheric processes, rheology, strength heterogeneities, tectonics, eustasy, sedimentation and erosion.

The evolution of the area is influenced by a number of factors: (1) thermal subsidence centred in the central North Sea providing accommodation space for thick sediment deposits; (2) 250-m eustatic fall from the Late Cretaceous to present, which causes exhumation of the North Sea Basin margins; (3) varying sediment supply; (4) isostatic adjustments following erosion and sedimentation; (5) Late Cretaceous–early Cenozoic Alpine compressional phases causing tectonic inversion of the Sorgenfrei–Tornquist Zone (STZ) and other weak zones.

The stress field and the lateral variations in lithospheric strength control lithospheric deformation under compression. The lithosphere is relatively weak in areas where Moho is deep and the upper mantle warm and weak. In these areas the lithosphere is thickened during compression producing surface uplift and erosion (e.g., at the Ringkøbing–Fyn High and in the southern part of Sweden). Observed late Cretaceous–early Cenozoic shallow water depths at the Ringkøbing–Fyn High as well as Cenozoic surface uplift in southern Sweden (the South Swedish Dome (SSD)) are explained by this mechanism.

The STZ is a prominent crustal structural weakness zone. Under compression, this zone is inverted and its surface uplifted and eroded. Contemporaneously, marginal depositional troughs develop. Post-compressional relaxation causes a regional uplift of this zone.

The model predicts sediment distributions and paleo-water depths in accordance with observations. Sediment truncation and exhumation at the North Sea Basin margins are explained by fall in global sea level, isostatic adjustments to exhumation, and uplift of the inverted STZ. This underlines the importance of the mechanisms dealt with in this paper for the evolution of intra-cratonic sedimentary basins.     

Fine‐grained meandering systems of the Lower Permian Clear Fork Formation of north‐central Texas,USA: Lateral and oblique accretion on an arid plain

Facies models that adequately represent the diverse range of fine‐grained fluvial systems are currently lacking from the literature. In this paper, the spectrum of these systems on the arid plains of western equatorial Pangea is explored, as well as the source and nature of the fine‐grained sediments. Eight fluvial elements in the Early Permian Clear Fork Formation of north‐central Texas represent channel systems up to 7 m deep with coarse basal deposits, three types of lateral‐accretion deposits and sandstone sheets, with laminated, disrupted and massive mudstones laid down in abandoned channels and on floodplains. The three fine‐grained fluvial styles represent a continuum between two end‐members: sustained lateral accretion of bedload composed of quartzose sediments and mud aggregates on point bars, and oblique accretion of suspended sediment on steep accretionary benches and banks with limited lateral migration. This spectrum is controlled, in part, by grain size and the proportion of suspended to bedload sediments. The presence of rarely documented swept ripples on exhumed accretion surfaces is attributed to rapid decline in water levels and downstream re‐entry of overbank floodwaters into the channel. Rill casts, roots and disrupted mudstones low down in channel bodies indicate periods of near‐dryness. Laterally extensive sheet sandstones were formed by episodic flows in broad, sandbed channels. The fluvial sediments were primarily intrabasinally sourced with extrabasinal sediments brought in during major floods from upland source areas or reworked from local storage in the basin, representing a supply limited system. The upward change in cement composition from mainly calcite and ankerite to dolomite and gypsum with minor celestine implies increasingly saline groundwater and progressive aridification, supporting Late Palaeozoic palaeoclimatic models. By integrating petrographic data with sedimentology, a plethora of information about ancient landscapes and climate is provided, allowing a fuller comparison between the Clear Fork Formation and modern dryland alluvial plains.     

Conceptual models for short‐eccentricity‐scale climate control on peat formation in a lower Palaeocene fluvial system,north‐eastern Montana (USA)

Fluvial systems in which peat formation occurs are typified by autogenic processes such as river meandering, crevasse splaying and channel avulsion. Nevertheless, autogenic processes cannot satisfactorily explain the repetitive nature and lateral continuity of many coal seams (compacted peats). The fluvial lower Palaeocene Tullock Member of the Fort Union Formation (Western Interior Williston Basin; Montana, USA ) contains lignite rank coal seams that are traceable over distances of several kilometres. This sequence is used to test the hypothesis that peat formation in the fluvial system was controlled by orbitally forced climate change interacting with autogenic processes. Major successions are documented with an average thickness of 6·8 m consisting of ca 6 m thick intervals of channel and overbank deposits overlain by ca 1 m thick coal seam units. These major coal seams locally split and merge. Time‐stratigraphic correlation, using a Cretaceous–Palaeogene boundary event horizon, several distinctive volcanic ash‐fall layers, and the C29r/C29n magnetic polarity reversal, shows consistent lateral recurrence of seven successive major successions along a 10 km wide fence panel perpendicular to east/south‐east palaeo‐flow. The stratigraphic pattern, complemented by stratigraphic age control and cyclostratigraphic tests, suggests that the major peat‐forming phases, resulting in major coal seams, were driven by 100 kyr eccentricity‐related climate cycles. Two distinct conceptual models were developed, both based on the hypothesis that the major peat‐forming phases ended when enhanced seasonal contrast, at times of minimum precession during increasing eccentricity, intensified mire degradation and flooding. In model 1, orbitally forced climate change controls the timing of peat compaction, leading to enhancement of autogenic channel avulsions. In model 2, orbitally forced climate change controls upstream sediment supply and clastic influx determining the persistence of peat‐forming conditions. At the scale of the major successions, model 2 is supported because interfingering channel sandstones do not interrupt lateral continuity of major coal seams.     

Latest Triassic to Early Jurassic Thrusting and Exhumation in the Southern Ordos Basin,North China: Evidence from LA‐ICP‐MS‐based Apatite Fission Track Thermochronology

The contractional structures in the southern Ordos Basin recorded critical evidence for the interaction between Ordos Basin and Qinling Orogenic Collage. In this study, we performed apatite fission track(AFT) thermochronology to unravel the timing of thrusting and exhumation for the Laolongshan-Shengrenqiao Fault(LSF) in the southern Ordos Basin. The AFT ages from opposite sides of the LSF reveal a significant latest Triassic to Early Jurassic time-temperature discontinuity across this structure. Thermal modeling reveals at the latest Triassic to Early Jurassic, a ~50°C difference in temperature between opposite sides of the LSF currently exposed at the surface. This discontinuity is best interpreted by an episode of thrusting and exhumation of the LSF with ~1.7 km of net vertical displacement during the latest Triassic to Early Jurassic. These results, when combined with earlier thermochronological studies, stratigraphic contact relationship and tectono-sedimentary evolution, suggest that the southern Ordos Basin experienced coeval intense tectonic contraction and developed a north-vergent fold-and-thrust belt. Moreover, the southern Ordos Basin experienced a multi-stage differential exhumation during Mesozoic, including the latest Triassic to Early Jurassic and Late Jurassic to earliest Cretaceous thrust-driven exhumation as well as the Late Cretaceous overall exhumation. Specifically, the two thrust-driven exhumation events were related to tectonic stress propagation derived from the latest Triassic to Early Jurassic continued compression from Qinling Orogenic Collage and the Late Jurassic to earliest Cretaceous intracontinental orogeny of Qinling Orogenic Collage, respectively. By contrast, the Late Cretaceous overall exhumation event was related to the collision of an exotic terrain with the eastern margin of continental China at ~100 Ma.     

Exhumation mechanisms of melt‐bearing ultrahigh pressure crustal rocks during collision of spontaneously moving plates

A series of 2D petrological–thermomechanical numerical experiments was conducted to: (i) characterize the variability of exhumation mechanisms of ultrahigh pressure metamorphic (UHPM) rocks during collision of spontaneously moving plates and (ii) study the possible geodynamic effects of melting at ultrahigh pressure conditions for the exhumation of high‐temperature–ultrahigh pressure metamorphic (HT–UHPM) rocks. To this end, the models include fluid‐ and melt‐induced weakening of rocks. Five distinct modes of exhumation of (U)HPM rocks associated with changes in several parameters in the models of plate collision and continent subduction are identified as follows: vertical crustal extrusion, large‐scale crustal stacking, shallow crustal delamination, trans‐lithospheric diapirism, and channel flow. The variation in exhumation mechanisms for (U)HPM rocks in numerical models of collision driven by spontaneously moving plates contrasts with the domination of the channel flow mode of exhumation in a majority of the published results from numerical models of collision that used a prescribed plate convergence velocity and/or did not include fluid‐ and melt‐induced weakening of rocks. This difference in the range of exhumation mechanisms suggests that the prescribed convergence velocity condition and the neglect of fluid‐ and melt‐related weakening effects in the earlier models may inhibit development of several important collisional processes found in our experiments, such as slab breakoff, vertical crustal extrusion, large‐scale stacking, shallow crustal delamination and relamination, and eduction of the continental plate. Consequently, the significance of channel flow for the exhumation of UHPM rocks may have been overstated based on the results of the earlier numerical experiments. In addition, the results from this study extend over a larger proportion of the high‐temperature range of P–T conditions documented from UHPM rocks, including those retrieved from HT–UHPM rocks, than the results of experiments from previous numerical models. In particular, the highest peak metamorphic temperatures (up to 1000 °C) are recorded in the case of the vertical crustal extrusion model in which subducted continental crust is subjected to a period of prolonged heating by asthenospheric mantle abutting the continental side of the vertically hanging slab. Nonetheless, some extreme temperature conditions which have been suggested for the Kokchetav and Bohemian massifs, perhaps up to 1100–1200 °C, are still to be achieved in experiments using numerical models.     

混合沉积研究进展与关键问题

近年来,混合沉积研究已逐渐成为沉积学领域颇受关注的重要课题。在前人研究的基础上系统梳理、总结了国内外混合沉积研究所取得的进展,提出了现阶段混合沉积研究面临的主要问题。国内外混合沉积研究可划分为4个阶段:现象描述阶段、基础理论研究阶段、海相混合沉积研究阶段、陆相混合沉积及综合研究阶段。受不同地质条件的约束,混合沉积岩石学分类方案并未形成统一的标准。混合沉积成因类型一般包括间断混合、相混合、原地混合与母源混合。混合沉积现象具有普遍性,可发育于海相、淡水湖盆、咸化湖盆等各类型沉积环境中,具有多样化的沉积类型,其控制因素一般包括碎屑物质供给、气候与水体环境、海（湖）平面变化、古地貌条件、构造作用以及水动力条件等。混合沉积具有重要的油气地质意义,与三角洲伴生的近源混合沉积、水下隆起区的远源混合沉积以及藻混合沉积可形成优质的陆相混积型油气储层。现阶段混合沉积研究中主要存在以下几方面问题:岩石分类方案不统一、缺乏与野外露头剖面和现代沉积的考察对比、层序格架内混合沉积发育模式不清、传统的成因类型在复杂陆相混合沉积研究中的应用存在较大局限性、混积型储层地震响应特征不明确。针对混合沉积进行全面、深入的研究,对古地理环境恢复、沉积动力学分析及相关油气勘探具有重要的意义。     

Millennial‐scale stratigraphy of a tide‐dominated incised valley during the last 14 kyr: Spatial and quantitative reconstruction in the Tokyo Lowland,central Japan

Spatial and quantitative analysis of infilling processes of the tide‐dominated incised valleys beneath the Tokyo Lowland during the last 14 kyr was undertaken by using data from 18 sediment cores, 467 radiocarbon dates and 6100 borehole logs. The post‐Last Glacial Maximum valley fills consist of braided river, meandering river, estuary, spit and delta systems in ascending order. The boundary between the estuary and delta systems is regarded as the maximum flooding surface. The maximum flooding surface beneath the Tokyo Lowland is dated at 8 ka in the Arakawa Valley and 7 ka in the Nakagawa Valley. This age difference is due to the migration of the Tone River from the Arakawa Valley to the Nakagawa Valley at 5 ka, and suggests that the widely held view that the global initiation of deltas coincided with the abrupt rise of sea‐level at 9 to 8 ka is true only where there has been steady sediment supply from major rivers. The meandering river system is dominated by sheet‐like sands that were deposited during lateral migration of channels during the Younger Dryas and isolated vertical sands within muds that reflect vertical aggradation of channels before and after the Younger Dryas. The transition between these channel geometries is controlled by a threshold sea‐level rise of 4 to 7 mm yr^?1. Before migration of the Tone River at 5 ka, the tide‐dominated bay in the Nakagawa Valley was filled by upward‐fining laterally accreting muds. The muds accreted from the margin to the axis of the bay. Such lateral accretion of suspended particles derived from outside the bay has been documented in other tide‐dominated coastal environments and is probably common in other similar settings. After the migration of the Tone River, the bay was filled by upward‐coarsening deltaic sediments.     

Signatures of slope failures and river‐delta collapses in a perialpine lake (Lake Lucerne,Switzerland)

Historical reports from the 17th Century document two destructive tsunamis with run‐ups exceeding 5 m, affecting proximal basins of Lake Lucerne (Switzerland). One event in ad 1601 is coeval with a strong nearby earthquake (M_W ca 5·9) which caused extensive slope failures in many parts of the lake. The second event in ad 1687 is associated with an apparently spontaneous partial collapse of the Muota river delta. This study combines high‐resolution bathymetry, reflection seismic and lithological data to document the sedimentary and morphological signatures of the two subaqueous mass movements that probably generated the observed tsunamis. Such mass movements are significant as a common sedimentation process and as a natural hazard in fjord‐type lakes and similar environments. The deposits, covering large parts of the basins with thicknesses reaching >10 m, consist of two subunits: A lower ‘massflow deposit’ contains variably deformed sediments from the source areas. Its emplacement affected pre‐existing sediments, incorporating thin sediment slices into the deposit and increasing its volume. Deep‐reaching deformation near basin margins is expressed as bulges on the lake floor. An overlying ‘megaturbidite’, featuring a graded, sandy base and a thick homogeneous muddy part, was deposited from suspended particles. The source area for the ad 1601 event, gently dipping lateral slopes with an unconsolidated hemipelagic sediment cover, hosts a pronounced slide scar with sharp escarpments and sliding surfaces. The source area for the ad 1687 event on an active delta slope has been overprinted by continued sedimentation and does not show an unambiguous scar. The case studies are exemplary for end‐member types of source areas (lateral versus delta slopes) and trigger mechanisms (seismic versus aseismic); they show that morphological mapping and reconstructions of past events are key components of a hazard assessment for mass movement‐generated tsunamis.     

The Holocene shallowing‐upward parasequence of north‐west Andros Island,Bahamas

Many pre‐Mesozoic records of Earth history are derived from shallow water carbonates deposited on continental shelves. While these carbonates contain geochemical proxy records of climate change, it is the stratal architecture of layered carbonate units that often is used to build age models based on the idea that periodic astronomical forcing of sea‐level controls the layering. Reliable age models are crucial to any interpretation of rates and durations of environmental change, but the physical processes that actually control this stratal architecture in shallow water carbonates are controversial. In particular, are upward‐shallowing stacks of carbonate beds bounded by flooding surfaces (‘parasequences’) truly a record of relative sea‐level change? The purpose of this study is to examine a tidal flat that is actively accumulating carbonate stratigraphy, and to determine the relative importance of tidal channel migration (poorly known, but investigated here) and Holocene sea‐level rise (well‐known) in controlling post‐glacial parasequence architecture. This work represents a field study of peritidal carbonate accumulation at Triple Goose Creek, north‐west Andros Island. By integrating surface facies maps with differential global positioning system topographic surveys, a quantitative relationship between facies and elevation is derived. Sedimentary facies are sensitive to elevation changes as small as 5 cm, and are responding to both internal (distance to nearest tidal channel) and external (sea‐level rise) controls. The surface maps also are integrated with 187 sediment cores that each span the entire Holocene succession. While flooding of the Triple Goose Creek area should have occurred by ca 4500 years ago, preservation of Holocene sediment did not begin until 1200 years ago. The tidal channels are shown to be stationary, or to migrate sluggishly at up to 6 cm per year. Therefore, while the location of tidal channels is responsible for the modern mosaic of surface facies, these facies and the channels that control them have not migrated substantially during the ca 1200 years of sediment accumulation at Triple Goose Creek. Once the region was channellized, vertical and lateral shifts in facies, such as the landward retreating shoreline, expanding mangrove ponds and seaward advancing inland algal marsh, are driven by changes in relative sea‐level and sediment supply, not migrating channels. While stratigraphic columns look different depending on the distance to the nearest tidal channel, the overall parasequence architecture everywhere at Triple Goose Creek records an upward‐shallowing trend controlled by the infilling of accommodation space generated by post‐glacial sea‐level rise.     

A depositional model for hydromagnesite–magnesite playas near Atlin,British Columbia,Canada

This study formulates a comprehensive depositional model for hydromagnesite–magnesite playas. Mineralogical, isotopic and hydrogeochemical data are coupled with electron microscopy and field observations of the hydromagnesite–magnesite playas near Atlin, British Columbia, Canada. Four surface environments are recognized: wetlands, grasslands, localized mounds (metre‐scale) and amalgamated mounds composed primarily of hydromagnesite [Mg₅(CO₃)₄(OH)₂·4H₂O], which are interpreted to represent stages in playa genesis. Water chemistry, precipitation kinetics and depositional environment are primary controls on sediment mineralogy. At depth (average ≈ 2 m), Ca–Mg‐carbonate sediments overlay early Holocene glaciolacustrine sediments indicating deposition within a lake post‐deglaciation. This mineralogical change corresponds to a shift from siliciclastic to chemical carbonate deposition as the supply of fresh surface water (for example, glacier meltwater) ceased and was replaced by alkaline groundwater. Weathering of ultramafic bedrock in the region produces Mg–HCO₃ groundwater that concentrates by evaporation upon discharging into closed basins, occupied by the playas. An uppermost unit of Mg‐carbonate sediments (hydromagnesite mounds) overlies the Ca–Mg‐carbonate sediments. This second mineralogical shift corresponds to a change in the depositional environment from subaqueous to subaerial, occurring once sediments ‘emerged’ from the water surface. Capillary action and evaporation draw Mg–HCO₃ water up towards the ground surface, precipitating Mg‐carbonate minerals. Evaporation at the water table causes precipitation of lansfordite [MgCO₃·5H₂O] which partially cements pre‐existing sediments forming a hardpan. As carbonate deposition continues, the weight of the overlying sediments causes compaction and minor lateral movement of the mounds leading to amalgamation of localized mounds. Radiocarbon dating of buried vegetation at the Ca–Mg‐carbonate boundary indicates that there has been ca 8000 years of continuous Mg‐carbonate deposition at a rate of 0·4 mm yr^?1. The depositional model accounts for the many sedimentological, mineralogical and geochemical processes that occur in the four surface environments; elucidating past and present carbonate deposition.