Tectono-stratigraphy of Lower Cretaceous Tanan sub-basin,Tamtsag Basin,Mongolia: Sequence architecture,depositional systems and controls on sediment infill

Tanan sub-basin is an active-fault bounded basin. The spatial distribution and temporal evolution of depositional systems were significantly influenced by tectonics. Fault movement and stages of basin development controlled the subsidence rates and the potential for erosion and the rate of sediment supply. Distinct stages of rift evolution during the early Cretaceous can be recognized, namely the early syn-rift, rift climax and late syn-rift stages. Three types of lacustrine sequence, consisting of distinctive depositional systems, are distinguished: (1) the early syn-rift sequences (SQ1 + SQ2), which are composed mainly of fan delta and shallow lacustrine depositional systems; (2) the rift climax sequences (SQ3) which developed in response to rapid and differential tectonic subsidence rates, and consist of fan delta, deep lacustrine and sublacustrine fan depositional systems; and (3) the late syn-rift sequences (SQ4) which are comprised of braided-delta and shallow lacustrine depositional systems. Each of the three lacustrine sequence architectures stands for a particular stage of basin fill and reflects variable rates of basin subsidence. Within each sequence, depositional systems and their stacking patterns are interpreted to have been a function of the interaction between tectonics and sediment supply. Differential subsidence across the basin, related to rotation of fault blocks, resulted in the formation of distinct paleomorphologies in different structural settings. These settings were fault-scarp zones controlling the development of fan-deltas, fault-terrace zones controlling the development of fan-delta and sublacustrine fans, half-graben dip-slope zones controlling the development of braided river and braided deltas, and intra-basinal fault-break zones controlling the development of sublacustrine fans. During the late syn-rift stage, active tectonism, displacement on the boundary faults had ceased. At this stage the depositional systems and their stacking patterns were dominantly related to the sediment supply rates, and not to tectonic activity.     

Continental shelf architecture and sea-level cycles: Late Quaternary high-resolution stratigraphy of the Gulf of Cádiz, Spain

 The stratal architecture of the Gulf of Cádiz continental margin (SW Spain) has been analyzed by using single-channel, very high-resolution seismic reflection profiles. An evolutionary scheme of asymmetrical depositional sequences is proposed that was governed by the Late Pleistocene–Holocene sea-level fluctuations. Stratigraphic analysis defined 14 seismic units, that are configured into two major type-1 depositional sequences related to 4th-order eustatic sea level changes (100–110 ka). Within these sequences, minor asymmetrical depositional sequences have been recognized related to 5th-order eustatic cycles (22–23 ka) superimposed and modulated by the regressive trends of 4th-order cycles. In 5th-order depositional sequences, the forced regressive and lowstand deposits are volumetrically dominant. They cause the main progradation of the margin in such a way that they form the margin structure almost entirely. Received: 6 April 1995 / Revision received: 8 March 1996     

Seismic stacking pattern of the Faro-Albufeira contourite system (Gulf of Cadiz): a Quaternary record of paleoceanographic and tectonic influences

A Quaternary stratigraphic stacking pattern on the Faro-Albufeira drift system has been determined by analysing a dense network of high-resolution single-channel seismic reflection profiles. In the northern sector of the system an upslope migrating depositional sequence (elongate separated mounded drift) parallel to the margin has been observed associated with a flanking boundary channel (Alvarez Cabral moat) that depicts the zone of Mediterranean Outflow Water (MOW) acceleration and/or focussing. A consequent erosion along the right hand border and deposition on the left hand flank is produced in this sector. The sheeted aggrading drift is the basinward prolongation of the elongate separated mounded drift, and developed where the MOW is more widely spread out. The overall sheeted contourite system is separated into two sectors due to the Diego Cao deep. This is a recent erosional deep that has steep erosional walls cut into Quaternary sediments. Two major high-order depositional sequences have been recognised in the Quaternary sedimentary record, Q-I and Q-II, composed of eight minor high-order depositional sequences (from A to H). The same trend in every major and minor depositional sequence is observed, especially in the elongate mounded drift within Q-II formed of: A) Transparent units at the base; B) Smooth, parallel reflectors of moderate-high amplitude units in the upper part; and C) An erosional continuous surface of high amplitude on the top of reflective units. This cyclicity in the acoustic response most likely represents cyclic lithological changes showing coarsening- upward sequences. A total of ten minor units has been distinguished within Q-II where the more representative facies in volume are always the more reflective and are prograding upslope with respect to the transparent ones. There is an important change in the overall architectural stacking of the mounded contourite deposits from a more aggrading depositional sequence (Q-I) to a clear progradational body (Q-II). We suggest that Q-I and Q-II constitute high-order depositional sequences related to a 3rd-order cycle at 800 ky separated by the most prominent sea-level fall at the Mid Pleistocene Revolution (MPR), 900–920 ky ago. In more detail the major high-order depositional sequences (from A to H) can be associated with asymmetric 4th-order climatic and sea-level cycles. In the middle slope, the contourite system has a syn-tectonic development with diapiric intrusions and the Guadalquivir Bank uplift. This syn-tectonic evolution affected the overall southern sheeted drift from the A to F depositional sequences, but G and H are not affected. These last two depositional sequences are less affected by these structures with an aggrading stacking pattern that overlaps the older depositional sequences of the Guadalquivir Bank uplift and diapiric intrusions.     

Quaternary evolution of the Gulf of İzmit (NW Turkey): a sedimentary basin under control of the North Anatolian Fault Zone

The Quaternary evolution of the Gulf of İzmit, situated on the tectonically active North Anatolian Fault Zone (NAFZ), was investigated using seismic reflection, paleontologic, and sediment textural data. On the basis of seismic stratigraphic and sedimentologic-paleontologic interpretations, four depositional units were distinguished within the Plio-Quaternary sequence of the Gulf of İzmit. According to these data, Plio-Quaternary deposits supplied from the northern terrestrial area started to accumulate during a progradational phase, in a south-facing half-graben. A coarse-grained sedimentary unit prograding into the gulf from the south since 200 ka b.p. indicates a dramatic variation in the evolution of the gulf, with the initiation of a new strike-slip fault of the NAFZ and a corresponding uplift of the Armutlu Peninsula in the south of the gulf. During the evolution of this fault from a wide shear zone consisting of right-stepped strike-slip faults and pull-apart basins to a localized principal fault zone, sediments were deposited under the influence of northerly prograding terrestrial and shallow-marine conditions due to relative sea-level fluctuations in the Marmara Sea. During this period, the Gulf of İzmit was invaded mainly by Mediterranean and partly by Black Sea waters. In the latest glacial period, shallow areas in the gulf became subaerially exposed, whereas the central and western sub-basins of the gulf turned into lakes. The present evolution of the Gulf of İzmit is controlled by the after effects of the new rupture of the NAFZ and the estuarine nature of the gulf environment.     

Sedimentology and depositional architecture of tidal compound dunes on a carbonate ramp: The lower Miocene deposits of the central Apennine (Latium,Italy)

The sedimentology and sequence stratigraphy of the central Apennine lower Miocene carbonate deposits (Guadagnolo Formation) are the goal of this paper. The Guadagnolo carbonate ramp deposits consist of a thick succession of three main lithofacies: marls, marly limestones and cross-bedded limestones. The lateral and vertical facies distribution, as well as the biota assemblages, suggests a deposition of these sediments along the middle-outer ramp sector of the Latium-Abruzzi carbonate platform. All the data suggest sedimentation under the influence of tidal currents that were responsible of bedforms generation as simple and compound dunes. These bodies are developed on metric and decametric scale, and are stacked one to other to form complex sedimentary bodies extending both in strike and dip section for several tens to hundred meters. The dune system developed in a semiclosed basin (the Paleoadriatic sea), open in the southern and closed in the northern sector respectively. Within this basin a probably amphidromic system developed. The flow sediment transport was dominantly westward, and was conditioned by the ramp paleotopography. From a sequence stratigraphic point of view several high and low rank depositional sequences that were differentiated basing on their relative physical scale (thickness of each unit) and on the lateral extension of the unconformities and the correlative conformities bounding them were recognized. The hierarchy of recognized sequence-stratigraphic units include, from the smallest to the largest: simple depositional sequences, low-rank composite depositional sequences and high-rank composite depositional sequences. In the Guadagnolo succession four high-rank composite depositional sequences having a duration variable from 0.9 to 1.6 Ma, and named Guadagnolo 1, 2, 3, and 4, were recognized. These high-rank composite sequences are internally constituted by a stacking of simple and low-rank composite depositional sequences, having a duration ranging from 40 ka to 200 ka. All these units constitute part of a higher-rank composite sequence developing between 21 and 14.80 Ma that we name “The Guadagnolo Depositional Sequence”. The wedge-shaped geometry, the thickness variation and the stacking pattern of the Guadagnolo succession are the response to eustasy and tectonic subsidence. The glacial eustasy mostly controlled the formation of the high-frequency depositional sequences, tectonic subsidence, related to the roll-back of the hinge west-directed subduction in turn connected to the advancement of the Apennine thrust modulated the accommodation space.     

Stratal patterns in the southwestern margin of the Ulleung Basin off southeast Korea: sequence architecture controlled by back-arc tectonism

 Major variations in type and rate of tectonic movement in the southwestern margin of the Ulleung Basin coincide in time with changes in stratal patterns at succession boundaries, suggesting that the effect of tectonism was dominant for the development of sequence architecture. During the back-arc opening (16–12 Ma), the rise of relative sea level and the high rate of sediment supply gave rise to sequences with sigmoid progradational patterns. During the back-arc closing (12–6.5 Ma), fall- and rise-dominated relative sea-level fluctuations resulted in sequences with varying stratal patterns depending upon changes in deposition rate. The rise-dominated relative sea level has been prevalent during the later stage (6.5 Ma–Present) with low sedimentation rate. Received: 16 January 1996 / Revision received: 7 February 1997     

Stratigraphy and facies distribution of the Utsira formation and the Pliocene sequences in the northern North Sea

The Upper Cenozoic deposits of the northern North Sea have been analysed in order to establish a regional and detailed stratigraphy. The Utsira Formation is subdivided into four log-units and mapped, and two main depocentres are outlined. The lower part of the Utsira Formation consists of thick marine, mounded sand bodies, interpreted as overall stacked lowstand fan deposits, while the upper part of the formation consists of more clayey-silty intervals, indicating increased relative sea level. The succeeding progradational Pliocene deposits are subdivided into 13 high-frequency depositional sequences and are mapped. The sequences are grouped into four composite sequences. Each of the four Pliocene composite sequences is composed of one or two rather locally distributed, prograding sequences (lowstand sequence set), succeeded by one or two more widely distributed aggrading-prograding sequences (transgressive-highstand sequence set). Boundaries between the composite sequences are recorded as marked changes in distribution of depocentres and sequence architecture. The regional uplift of Scandinavia is believed to be the main control on sediment input, feeding the succeeding general prograding Pliocene sequences. Oscillations of the eustatic sea level punctuated the tectonically controlled progradation and affected variations in the accommodation space, and thus created the high-frequency sequences.     

3-D internal architecture of methane hydrate-bearing turbidite channels in the eastern Nankai Trough, Japan

The reservoir architecture of methane hydrate (MH) bearing turbidite channels in the eastern Nankai Trough, offshore Japan is evaluated using a combination of 3-D seismic and well data. On the 3-D seismic section, the MH-bearing turbidite channels correspond to complex patterns of strong seismic reflectors, which show the 3-D internal architecture of the channel complex. A seismic-sequence stratigraphic analysis reveals that the channel complex can be roughly classified into three different stages of depositional sequence (upper, middle, and lower). Each depositional sequence results in a different depositional system that primarily controls the reservoir architecture of the turbidite channels. To construct a 3-D facies model, the stacking patterns of the turbidite channels are interpreted, and the reservoir heterogeneities of MH-bearing sediments are discussed. The identified channels at the upper sequence around the β1 well exhibit low-sinuosity channels consisting of various channel widths that range from tens to several hundreds of meters. Paleo-current flow directions of the turbidite channels are typically oriented along the north-northeast-to-south-southwest direction. High-amplitude patterns were identified above the channels along the north-to-south and north-northeast-to-south-southeast directions. These roughly coincide with the paleo-current flow of the turbidite channels. An interval velocity using high-density velocity analysis shows that velocity anomalies (>2000 m/s) are found on the northeastern side of the turbidite channels. The depositional stage of the northeastern side of the turbidite channels exhibits slightly older sediment stages than the depositional stages of the remaining channels. Hence, the velocity anomalies of the northeastern side of the channels are related to the different stages of sediment supply, and this may lead to the different reservoir architectures of the turbidite channels.     

The Deep-Sea Fan deposits of the miocene Marnoso-arenacea formation, northern Apennines

Submarine fans of different sizes, geometry, and petrology were built in the Marnoso-arenacea Basin, a migrating foredeep within an active continental margin. In an initial depositional stage, a well-developed basin plain received sediment from flows that by-passed restricted fan systems, now buried, located near the north end of an elongated basin. Minor fans grew near the steeper, tectonically deformed side of the basin. In the later stage, turbidite deposition was stopped in the former basin plain. Sediment sources and feeder channels shifted and fed fan lobes that prograded in a narrower trough and were distored (choked). The tectonic control on development of megasequence and sand bodies is stressed here in contrast with previous emphasis on “inner” or “autocyclic” mechanisms. Margin setting represents fan and/or source area     

Applying seismic geomorphology to delineate switched sequence stratigraphic architecture in lacustrine rift basins: An example from the Pearl River Mouth Basin,northern South China Sea

Switched sequence stratigraphic architectural units were developed in the Eocene Wenchang Formation stratigraphic section of the Pearl River Mouth Basin (PRMB), northern South China Sea. Utilizing a high-quality 3D seismic data set, well logs and restored paleogeomorphology, the architecture and genesis of switched sequence stratigraphic units have been systematically investigated. The Wenchang Formation, a second-order sequence, can be subdivided into seven third-order sequences (from base to top: SQ1, SQ2, SQ3, SQ4, SQ5, SQ6, and SQ7). The sequence stratigraphic architecture of the Wenchang Formation is characterized by continuous lateral stacking patterns from sequences SQ1 to SQ7. Sequences SQ1–SQ4 mainly developed in the HZ26 sag, whereas sequences SQ5–SQ7 mainly developed in the XJ24 sag. The depositional centres of the Wenchang Formation appear to have migrated from the HZ26 sag to the XJ24 sag-along the northwest direction from sequences SQ1 to SQ7. Multiple tectonic activation episodes or alternating tectonic subsidence of the HZ26 and XJ24 sags resulted in the distinctive geomorphological features that effected the development of the switched sequence stratigraphic architecture in the study area. The switched sequence stratigraphic architecture presented in this study may provide new insights into a better understanding of sequence stratigraphic stacking patterns in continental lacustrine rift basins.     

Defining the concept of stratigraphic grade and applying it to stratal (reservoir) architecture and evolution of the slope-to-basin profile: An outcrop perspective

Stratigraphic grade is the similarity of the morphology of successive slope-to-basin profiles in a genetically related depositional system. In this article we use data collected from regional cross-sections of six depositional systems, stratal architecture derived from outcrops of the Lewis Shale (Wyoming, USA), and the Ross Sandstone (Ireland), and supplementary outcrop and subsurface data from other depositional systems to determine how stratigraphic grade relates to stratal (reservoir) architecture in deepwater systems.Four methods are developed that collectively define stratigraphic grade: (1) regional stacking patterns of fourth-order stratigraphic surfaces, (2) the relationship between the trajectory of the shelf edge (T_se) and the trajectory of the depocenter (T_d) for fourth-order stratigraphic units, (3) morphology of the slope-to-basin profiles of fourth-order stratigraphic surfaces, and (4) the similarity of the morphologies of slope-to-basin profiles of fourth-order surfaces in a system (σ_s, σ_r). Several characteristics of stratigraphic (reservoir) architecture of fourth-order stratigraphic cycles are related to stratigraphic grade: (1) longitudinal distribution of sandstone in fourth-order cycles, (2) location of maximum sandstone relative to the depocenter of fourth-order cycles, (3) lengths of fourth-order submarine fans, and (4) longitudinal and vertical distribution of architectural elements. Stratigraphic grade is thus a predictor of reservoir architecture and can thereby be used to reduce the uncertainty in the interpretation of subsurface data.The concept of stratigraphic grade is useful in understanding the stratigraphic evolution of deepwater systems. Most deepwater systems analyzed in this study initiated as out-of-grade and temporally evolved to graded systems over a time span of millions of years. Systems rarely evolve from graded to out-of-grade. First-order controls on stratigraphic grade are determined to be angle of slope, tectonically forced changes in angle of slope during deposition, and sediment supply.     

Depositional conditions and organic matter distribution in the Bornholm Basin,Baltic Sea

Information on grain-size distribution and total organic carbon (TOC) content of surface sediment and cores from the Bornholm Basin, together with dating of cores using the ²¹⁰Pb method and shallow seismic chirp profiling, has been analysed to elucidate long-term accumulation patterns. The presence of non-depositional areas with lag sediments and low TOC content below the wave base indicates that inflows of dense bottom water originating in the North Sea and associated near-bottom currents have strong influence on the depositional patterns of bulk sediment and organic matter in this deep basin. The general fining in mean grain size towards the northeast corresponds to the direction of inflow currents and prevailing winds. Recent and previously found ²¹⁰Pb-based mean accumulation rates vary greatly within the basin, between 129 and 1,144 g m⁻² year⁻¹. The accumulation rate may vary by a factor of three even between stations located only 3–4 km apart. Rates recorded close to a seismic profile are consistent with the variation in Holocene sediment thickness. This variation reflects a depositional system controlled by near-bottom inflow currents, consisting of a large-scale channel and a wedge-formed sediment package. The spatial variation in TOC content depends partly on water depth, presumably due to generally poorer degradation in the deepest part of the basin because of less frequent oxygen supply by inflow water. Moreover, there is a tendency of higher TOC contents in the southern part of the basin, which may be due to the input of sediments originating from the Oder River. Compared to values for the central, deep Baltic Sea, TOC contents show lower values of 4–6% and insignificant temporal variations. This may be due to the Bornholm Basin being located much closer to the source of the more oxic inflow water, resulting in more favourable degradation conditions.     

Post-Calabrian sequence stratigraphy of the northwestern Alboran Sea (southwestern Mediterranean)

The post-Calabrian sedimentary column of the northwestern Alboran Sea comprises three depositional sequences. The two older depositional sequences are defined by lowstand systems tracts (shelf-margin deltas, slope, base-of-slope, and basin deposits, and the Guadiaro channel-levee complex). In contrast, the most recent depositional sequence also includes transgressive (relict shelf facies) and high-stand (the Guadalmedina-Guadalhorce prodelta and hemipelagic facies) systems tracts. The stratigraphic architecture of these depositional sequences is controlled by the synchronism between high frequency sea-level changes, variations in sediment supply, and sedimentary processes. The configuration of the depositional sequences is variable and their distribution is complex, as a result of the relative importance played by sea-level changes and tectonism through the area.

The sequence boundaries are represented by polygenetic surfaces in the proximal margin, and by monogenetic surfaces in the distal margin and basin. Each polygenetic surface results from the interaction between the sequence boundary with the lowstand erosional truncation surface and the transgressive surface, both developed during the previous sea-level cycle. The monogenetic surfaces correspond to unconformities and their correlative conformities, formed during sea-level lowstands. This pattern of depositional sequences developed in the margin and basin of the northwestern Alboran Sea shows differences with the Exxon Sequence Stratigraphy Model as traditionally applied: sea-level change control is essentially recognized through lowstand systems tracts, and sequence boundary coincides with lowstand erosional truncation surface and transgressive surface, both developed during the previous sea-level cycle.     

西湖凹陷平湖斜坡带始新统平湖组层序地层

运用高分辨率层序地层学的理论和技术,以钻井、测井、地震资料为基础,对西湖凹陷平湖斜坡带始新统平湖组进行了层序地层研究。研究区向上“变深”的非对称型短期旋回层序最为发育,反映了研究区在平湖组沉积时期处于距物源区较近或物源供给较充分的环境下;中期旋回以发育上升半旋回沉积厚度大于下降半旋回的不对称型旋回为主,层序分界面两侧为有利砂体发育的部位;在不同级次基准面旋回层序划分的基础上,建立了以中期旋回为时间-地层对比单元的钻（测）井高分辨率层序地层格架。     

The Cosmonaut Sea Wedge

A set of multi-channel seismic profiles (∼15,000 km) is used to study the depositional evolution of the Cosmonaut Sea margin of East Antarctica. We recognize a regional sediment wedge, below the upper parts of the continental rise, herein termed the Cosmonaut Sea Wedge. The wedge is situated stratigraphically below the inferred glaciomarine section and extends for at least 1,200 km along the continental margin with a width that ranges from 80 to about 250 km. The morphology of the wedge and its associated depositional features indicate a complex depositional history, where the deep marine depositional sites were influenced by both downslope and alongslope processes. This interaction resulted in the formation of several proximal depocentres, which at their distal northern end are flanked by elongated mounded drifts and contourite sheets. The internal stratification of the mounded drift deposits indicates that westward flowing bottom currents reworked the marginal deposits. The action of these currents together with sea-level changes is considered to have controlled the growth of the wedge. We interpret the Cosmonaut Sea Wedge as a composite feature comprising several bottom current reworked fan systems. The wide spectrum of depositional geometries in the stratigraphic column reflects dramatic variations in sediment supply from the continental margin as well as varying interaction between downslope and alongslope processes.     

Depositional architecture and sequence stratigraphy of the Karoo basin floor to shelf edge succession, Laingsburg depocentre, South Africa

The Laingsburg depocentre of the SW Karoo Basin, South Africa preserves a well-exposed 1200 m thick succession of upper Permian strata that record the early filling of a basin during an icehouse climate. Uniformly fine-grained sandstones were derived from far-field granitic sources, possibly in Patagonia, although the coeval staging and delivery systems are not preserved. Early condensed shallow marine deposits are overlain by distal basin plain siltstone-prone turbidites and volcanic ashes. An order of magnitude increase in siliciclastic input to the basin plain is represented by up to 270 m of siltstone with thin sandstone turbidites (Vischkuil Formation). The upper Vischkuil Formation comprises three depositional sequences, each bounded by a regionally developed zone of soft sediment deformation and associated 20-45 m thick debrite that represent the initiation of a major sand delivery system. The overlying 300 m thick sandy basin-floor fan system (Unit A) is divisible into three composite sequences arranged in a progradational-aggradational-retrogradational stacking pattern, followed by up to 40 m of basin-wide hemipelagic claystone. This claystone contains Interfan A/B, a distributive lobe system that lies 10 m beneath Unit B, a sandstone-dominated succession that averages 150 m thickness and is interpreted to represent a toe of slope channelized lobe system. Unit B and the A/B interfan together comprise 4 depositional sequences in a composite sequence with an overall basinward-stepping stacking pattern, overlain by 30 m of hemipelagic claystone. The overlying 400 m thick submarine slope succession (Fort Brown Formation) is characterized by 10-120 m thick sand-prone to heterolithic packages separated by 30-70 m thick claystone units. On the largest scale the slope stratigraphy is defined by two major cycles interpreted as composite sequence sets. The lower cycle comprises lithostratigraphic Units B/C, C and D while the upper cycle includes lithostratigraphic Units D/E, E and F. In each case a sandy basal composite sequence is represented by an intraslope lobe (Units B/C and D/E respectively). The second composite sequence in each cycle (Units C and E respectively) is characterized by slope channel-levee systems with distributive lobes 20-30 km down dip. The uppermost composite sequence in each cycle (Units D and F respectively) are characterised by deeply entrenched slope valley systems. Most composite sequences comprise three sequences separated by thin (<5 m thick) claystones. Architectural style is similar at individual sequence scale for comparable positions within each composite sequence set and each composite sequence. The main control on stratigraphic development is interpreted as late icehouse glacio-eustasy but along-strike changes associated with changing shelf edge delivery systems and variable bathymetry due to differential substrate compaction complicate the resultant stratigraphy.     

Seismic expression and inferred depositional environments of Plio-Pleistocene sedimentary sequences in the southwestern Caspian Sea

Eight seismic profiles from the southwestern Caspian Sea were analyzed to establish the sedimentary environments and depositional history in the South Caspian Basin since Pliocene times. Based on reflection terminations, nine sequence boundaries (S1 to S9) were identified and traced across the study area. Consequently, nine depositional sequences (S1–S9) were defined on the basis of seismic facies analysis. The results suggest a transition from non-marine sedimentation in the Lower Pliocene to marine-dominated conditions in the Upper Pliocene (S1–S4). Marine conditions then continued to the present time; however, several sea-level changes led to the formation of sequences S5 to S9. Although no local sea-level curve is available due to a lack of well data, there is good agreement between the seismic stratigraphy of the study area and a published regional sea-level curve.     

Sedimentary development of the Louisiana continental shelf related to sea level cycles: Part I—sedimentary sequences

Cyclic sequences occur worldwide in nearly every stratigraphic sequence; they are particularly well developed in marine deposits associated with large river systems. Superimposed on those cycles attributed to shifting sites of deposition are those related to high-frequency sea level changes. The large data base for this study (including 471 deep foundation borings, thousands of line kilometers of high-resolution seismic, and sedimentological and dating analyses) represents the most complete information on high-resolution chronostratigraphy and lithostratigraphy that is available on any modern continental shelf/upper slope. These data are used to document sedimentological characteristics and spatial depositional patterns during three complete sea level cycles over the entire continental shelf/upper slope of offshore Louisiana. Sedimentation during periods of high sea level is characterized by: 1) thin, slowly accumulated depositional sequences, referred to as condensed sections, 2) calcareous-rich deposits, including hemipelagic sediments and shell hashes, and 3) wide lateral continuity. Sedimentation during periods of low sea level is characterized by; 1) variable-thickness, rapidly accumulated sequences referred to as expanded sections, 2) coarse-grained elastic deposits, including abundant sands and gravels, and 3) well-defined depositional trends. Even though the data set covers only a short period of geologic time (240 000 yrs), these high frequency events are responsible for the deposition of excellent reservoir-quality facies in well-defined and predictable trends.     

Rift sequence stratigraphy

Conventional sequence stratigraphy has been developed primarily for passive-margin basins. Despite the conceptual advances within the last 30 years, a suitable model for rift basins has not yet been devised. Many authors have attempted to adapt the passive-margin model to all other tectonic settings, including rifts, despite the fundamental differences in terms of the mechanisms controlling the formation and evolution of these sedimentary basins. Passive margins have their stratigraphic framework controlled largely by cyclic sea-level fluctuations superimposed on long-term thermal subsidence. By contrast, rift basins have their accommodation history strongly related to their mechanical subsidence regime, with episodic pulses of extension that create space for sediment accumulation at very fast rates. Stages of rapid mechanical subsidence are typically followed by longer periods of tectonic quiescence, when sediment supply gradually consumes and fills the available accommodation. This cyclicity results in depositional sequences that display overall progradational trends and coarsening-upward vertical stacking patterns. Sequence boundaries are often marked by sharp flooding surfaces related to the transgression of lacustrine or marine systems in response to rapid tectonic subsidence and the consequent ‘instantaneous’ generation of accommodation. As such, a typical rift depositional sequence starts with a flooding surface overlain by a relatively thin transgressive systems tract and a much better developed highstand systems tract. A renewed subsidence pulse leads to the drowning of the previous deposits and the start of a new depositional sequence. The strong asymmetry of the base-level curve resembles the shape of glacio-eustatic cycles, with fast transgressions followed by longer term regressions, although at potentially different temporal scales.     

Global and continental-scale glaciations on the Precambrian earth

Earth’s climate during the Proterozoic Eon was marked by major glacial events with evidence for large continental ice sheets on many cratons, and with sedimentological data indicating that glaciers had extended to sea-level. This paper emphasizes the sedimentological and sequence stratigraphic responses to glaciations and evaluates the major driving forces of glaciations during the Precambrian. First- and second-order sequences are recognized related to continental-scale fragmentation and formation of marine rift basins wherein sedimentary rocks indicate glacial influences and pronounced tectonic-climatic linkages. Coarse syn-rift deposits are typically characterized by mass flow diamictites and conglomerates. It is important to undertake sedimentological facies and sequence stratigraphic analysis of these syn-rift and capping passive margin sequences, as well as of slope turbidite deposits which formed if enhanced subsidence of the basins was occurring. More generally, latitude and syn-rift tectonic uplift can cause formation of glacial ice and enhance distinctive glacial influences on extensional basin sedimentation, thus supporting a causal relationship between thermal subsidence and the formation of glacier ice on inland areas. During the Precambrian, however, it is suggested that long-lived marine-terminated glaciers also situated at low paleolatitudes, were related to an extensional tectonic setting. In such settings, glacial deposits associated with sedimentary sequences of distinctively different origin, e.g. carbonate and chemically mature siliciclastic sequences, can well be used to detect the prominent sequence boundaries to verify depositional systems tracts. Internal sediment stacking patterns in sequences are indicative of dynamic processes along glaciated continental margins and without always having the need for global synchroneity. In glacially influenced rift basins and continental margins it is important to recognize the sequence boundaries of significant subaerial unconformities and their correlative conformities. A sequence boundary is a chronostratigraphically significant surface always produced as a consequence of a change in relative sea-level. These can then be well related to initiation and decay of glaciations, however on-land glacial deposits in a very few cases are prevented from later erosion. Attenuation of continental crust during rifting and breakup of the continent raises relative sea-level and also many of the shallow intra-cratonic basins subsided below sea-level, in favourable conditions being affected by major continental glaciations.Paleoproterozoic and Neoproterozoic glacial deposits are known in North and South America, South Africa, India, Western Australia and Fennoscandia. Against this background, continental-scale to global glaciations in the Precambrian appear to be possible, however views on the causes and timing of these glaciations, as well as on planetary extent of ice cover are still contradictory. There is a need to continue detailed sedimentological studies of pre-glacial and post-glacial deposits as well as to interpret syn-glacial lithofacies for their inferred transportation and depositional processes. Pre-glacial deposits, especially, should provide a new target to help us understand the processes that initiated these Precambrian glaciations. The sequence stratigraphic approach with understanding of the stacking pattern of depositional systems could prevent oversimplification and use of just single events to explain the complexity of evolution of glacially influenced Precambrian continental margin sediments.