Heavy-metal loadings related to urban contamination in the Kooloonbung Creek catchment,Port Macquarie,New South Wales

Urbanisation and industrial development lead to contamination of estuaries and streams with dispersed loadings of heavy metals and metalloids. Contributions of these elements also occur from natural sources. This study provides baseline geochemical data on the respective natural and anthropogenic inputs of Cu, Pb, Zn, Cd, As, Sb, Cr, Ni, Mn and S to estuarine, fluvial and wetland sediments, and adjacent soils, in the Kooloonbung Creek catchment that drains the Port Macquarie urban area in north coastal New South Wales. There have been anthropogenic additions of Cu, Pb, Zn and As from dispersed urban sources at Port Macquarie, but they are restricted to the local catchment and do not impact on the adjacent Hastings River estuary. The most contaminated sediments display enrichment factors up to 20 × for Cu and Pb, 9 × for Zn and 5 × for As relative to local background values. However, only one value (for Pb) exceeds National Water Quality Management Strategy interim sediment quality guideline (high) values. On the other hand, sediments and local soils are commonly strongly enriched in Cr, Ni and Mn, reflecting adjacent ultramafic and mafic rock substrate and lateritic regolith. Concentrations of Cr and Ni are commonly well above interim sediment quality guideline (high) values for sediments, but are in mineralogical forms that are not readily bioavailable. Sediment and soil quality guideline values consequently need to recognise natural enrichments and the mineralogical siting of heavy metals. Although dissolved concentrations of heavy metals in stream waters are commonly low, there is evidence for mobility of Cu, Zn, Fe and Al. Parts of the Kooloonbung Creek wetland area lie on sulfidic estuarine sediments (potential acid sulfate soils). Experimental oxidation of uncontaminated and contaminated sulfidic sediments leads to substantial dissolution of heavy metals under acid conditions, with subsequent aquatic mobility. The results warn about disturbance and oxidation of potential acid sulfate soils that have been contaminated by urban and natural heavy-metal sources.     

A contemporary contamination record of stormdrain and harbour sediments, Wellington, New Zealand

 Sediments from stormdrain catchments and outlets in Wellington city and sediment traps from Wellington Harbour were sampled for trace metal content. Samples were analysed for total metal content using XRF and ICP-MS. High values of Pb and Zn were found in stormdrain catchments and outlets, decreasing to elevated background rock levels in the harbour. Maximum values were recorded in an inner city stormdrain catchment, with levels of Pb (4605 ppm), Cu (2981 ppm) and Zn (3572 ppm) all higher than the biological probable effects levels (PEL). Concentrations of As, Cr, Cu, Pb, Ni and Zn concentrations in all harbour sediment trap samples were below the PEL. The mean values for each harbour sediment trap sample can be used as an accurate historical baseline in future studies. Stormdrain samples with high trace metal levels were close to industrial and construction sites. The proximity of these outlets to recreational areas should be of concern to local authorities. Received: 28 August 1997 · Accepted: 15 December 1997     

Heavy metal pollution in freshly deposited sediments of the Yamuna River (the Ganges River tributary): a case study from Delhi and Agra urban centres, India

 The Yamuna River sediments, collected from Delhi and Agra urban centres, were analysed for concentration and distribution of nine heavy metals by means of atomic adsorption spectrometry. Total metal contents varied in the following ranges (in mg/kg): Cr (157–817), Mn (515–1015), Fe (28,700–45,300), Co(11.7–28.4), Ni (40–538), Cu (40–1204), Zn (107–1974), Pb (22–856) and Cd (0.50–114.8). The degree of metal enrichment was compared with the average shale concentration and shows exceptionally high values for Cr, Ni, Cu, Zn, Pb and Cd in both urban centres. In the total heavy metal concentration, anthropogenic input contains 70% Cr, 74% Cu, 59% Zn, 46% Pb, 90% Cd in Delhi and 61% Cr, 23% Ni, 71% Cu, 72% Zn, 63% Pb, 94% Cd in Agra. A significant correlation was observed between increasing Cr, Ni, Zn, and Cu concentrations with increasing total sediment carbon and total sediment sulfur content. Based on the Müller's geoaccumulation index, the quality of the river sediments can be regarded as being moderately polluted to very highly polluted with Cr, Ni, Cu, Zn, Pb and Cd in the Delhi and Agra urban centres. The present sediment analysis, therefore, plays an important role in environmental measures for the Yamuna River and the planning of these city centres. Received: 21 June 1999 · Accepted: 1 October 1999     

Heavy metals in freshly deposited sediments of the Gomati River (a tributary of the Ganga River): effects of human activities

 The concentrations of various metals (Cr, Cu, Co, Fe, Mn, Ni, Pb, Zn, and Cd) were determined in recently deposited surface sediments of the Gomati River in the Lucknow urban area. Markedly elevated concentrations (milligrams per kilogram) of some of the metals, Cd (0.26–3.62), Cu (33–147), Ni (45–86), Pb (25–77), and Zn (90–389) were observed. Profiles of these metals across the Lucknow urban stretch show a progressive downstream increase due to additions from 4 major drainage networks discharging the urban effluents into the river. The degree of metal contamination is compared with the local background and global standards. The geoaccumulation index order for the river sediments is Cd>Zn>Cu>Cr>Pb. Significant correlations were observed between Cr and Zn, Cr and Cu, Cu and Zn and total sediment carbon with Cr and Zn. This study reveals that the urbanization process is associated with higher concentrations of heavy metals such as Cd, Cu, Cr, Pb, and Zn in the Gomati River sediments. To keep the river clean for the future, it is strongly recommended that urban effluents should not be overlooked before their discharge into the river. Received: 16 February 1996 · Accepted: 29 February 1996     

The chemistry of suspended particulate material in a highly contaminated embayment of Port Jackson (Australia) under quiescent,high-wind and heavy-rainfall conditions

This study investigated physico-chemical characteristics of the water column and chemistry of suspended particulate material (SPM) under quiescent, high-wind and high-wind/heavy-rainfall conditions in Homebush Bay, a highly contaminated embayment of Port Jackson (Australia) to distinguish source and possible adverse effects to benthic and pelagic animals. Mean concentrations in surficial sediment were <1, 14, 181, 141, 37, 290 and 685 μg g⁻¹ for Cd, Co, Cr, Cu, Ni, Pb and Zn, respectively. Sediment chemistry indicated these metals had multiple sources, i.e. the estuary, stormwater and industry. Mean total suspended solids (TSS) were 7, 17 and 20 mg L⁻¹ during quiescent, high-rainfall and heavy rainfall/high wind conditions, respectively, whereas SPM Cd, Co, Cr, Cu, Ni, Pb and Zn concentrations varied between 13–25, 166–259, 127–198, 38–82, 236–305 and 605–865 μg g⁻¹, respectively under these conditions. TSS and total water metal concentrations were lowest during quiescent conditions. High TSS and metal loads in surface water characterised high-rainfall events. Wind-induced resuspension contributed the greatest mass of SPM and metals to the water column. Benthic animals may be adversely affected by Pb and Zn in sediment. Total water Cu and Zn concentrations may pose a risk to filter-feeding animals in the water column due to resuspension of contaminated sediment.     

Application of sediment-bound heavy metals in studies of estuarine health: a case study of Brisbane Water estuary,New South Wales

A case study is presented to assess the use of sedimentary chemical indicators for estuarine health. Reliable and efficient estuarine indicators are essential for management and monitoring purposes. Estuarine and fluvial sediments from Brisbane Water estuary were analysed for heavy metals to assess the quality of sediments and to determine the source and dispersion of contaminants in the estuary. Brisbane Water, 50 km north of Sydney, is a shallow (～5 m in main water body), wave-dominated barrier estuary with a generally sparsely developed catchment, except in the north where it is urbanised and industrialised. Heavy-metal loadings calculated for sub-catchments and the distribution of metals in surficial sediment identified Narara Creek, which drains the urbanised northern part of the catchment, as the main source of contaminants. Vertical profiles of sedimentary contaminants show that contamination continues to increase rapidly in all parts of the waterway to the present day. Concentrations of Cu, Pb and Zn in sediment adjacent to Narara Creek exceeded lower guideline levels, although moderate bioavailability (～40% for Cu, Pb and Zn) suggests the risk posed by sediments to benthic populations is low. Sediments in all parts of Brisbane Water show evidence of minor anthropogenic influence with maximum human-induced change (up to 5× enrichment) in the north of the estuary. Results demonstrate the use of sediment-bound heavy metal as an appropriate indicator of estuarine health.     

Assessment of Zn, Cu, Pb and Ni contamination in wetland soils and plants in the Lake Victoria basin

The impact of waste disposal on trace metal contamination was investigated in eleven wetlands in the Lake Victoria Basin. Samples of soil, water and plants were analysed for total Zn, Cu, Pb and Ni concentrations using flame atomic absorption spectrophotometry. The trace metal concentrations in soil were the highest in Katanga wetland with the highest mean concentrations of 387.5±86.5 mg/kg Zn, 171.5±36.2 mg/kg Pb, 51.20±6.69 mg/kg Cu and 21.33±2.23 mg/kg Ni compared to the lowest levels observed at Butabika (30.7±3.2 mg/kg Zn, 15.3±1.7 mg/kg Pb, 12.77±1.35 mg/kg Cu and 6.97±1.49 mg/kg Ni). Katanga receives waste from multiple industrial sources including a major referral city hospital while Butabika is a former solid waste dumpsite. Wetland soil near a copper smelter had a Cu concentration of 5936.3±56.2 mg/kg. Trace metal concentrations in industrial effluents were above international limits for irrigation water with the highest concentrations of 357,000 μg/L Cu and 1480 μg/L Zn at a Cu smelter and 5600 μg/L Pb at a battery assembling facility compared to the lowest of 50 μg/L Cu and 50 μg/L Zn in water discharged from Wakaliga dumpsite. Uptake of trace metals from soil differed from plant to plant and site to site. Higher levels of trace metals accumulated in the root rather than in the rhizome and the least amount was in the leaf. The study identifies industry as a potential source of trace metal contamination of water and the environment pent-up need for policy intervention in industrial waste management.     

Heavy metals content and distribution in the surface sediments of the Guangzhou section of the Pearl River,Southern China

The long-term industrialization and urbanization of Guangzhou city may lead to heavy metal contamination of its aquatic sediment. Nevertheless, only few studies have been published on the distribution and contamination assessment of heavy metals in this urban river sediment. Thus, the major objective of this study was to quantitatively assess contamination of heavy metals and their chemical partitioning in the sediments of the Guangzhou section of the Pearl River (GSPR). Surface sediment samples were collected at 10 sites in the main river and 12 sites in the creeks of the GSPR. The total content of Cd was determined by graphite furnace atomic adsorption spectrometry (GF-AAS), and content of Cr, Cu, Pb and Zn was determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). The chemical partitioning of these heavy metals in the sediments of the main river was determined by the sequential selective extraction (SSE) method. Results indicated that the average total concentrations of Cd, Cr, Pb, Cu and Zn in the sediments of the main river were 1.44, 63.7, 95.5, 253.6 and 370.0 mg/kg, respectively, whereas they were 2.10, 125.5, 110.1, 433.7 and 401.9 mg/kg in the sediments of the creeks. The sediment at M4 and C9 sites was heavily contaminated with about 8 and 11 of toxic unit, respectively. Cr, Cu, Pb and Zn were mostly bound to organic matter and in the residual phase, whereas Cd was mostly associated with the soluble and exchangeable phase and the residual phase. The mobility and bioavailability of Cd, Zn and Cr in the sediments of the main river were relatively higher than Cu and Pb, due to higher levels in the soluble and exchangeable fraction and the carbonate fraction. The potential acute toxicity in the sediments of the main river and creeks was mainly caused by Cu contamination, accounting for 21.7–37.1% and 16.9–46.3% of the total toxicity, respectively, followed by Zn and Pb. Adverse biological effects induced by heavy metals would be expected in the sediments of the GSPR. Therefore, the sediments of the GSPR, especially at M4 and C9 sites, need to be remediated to maintain aquatic ecosystem health.     

The impact of tailings dam spills and clean-up operations on sediment and water quality in river systems: the Rı́os Agrio–Guadiamar,Aznalcóllar,Spain

The Aznalcóllar tailings dam at Boliden Apirsa's Aznalcóllar/Los Frailes Ag–Cu–Pb–Zn mine 45 km west of Seville, Spain, was breached on 25 April 1998, flooding approximately 4600 hectares of land along the Rı́os Agrio and Guadiamar with approximately 5.5 million m³ of acidic water and 1.3×10⁶ m³ of heavy metal-bearing tailings. Most of the deposited tailings and approximately 4.7×10⁶ m³ of contaminated soils were removed to the Aznalcóllar open pit during clean-up work undertaken immediately after the spill until January 1999. Detailed geomorphological and geochemical surveys of the post-clean-up channel, floodplain and valley floor, and sediment and water sampling, were carried out in January and May 1999 at 6 reaches representative of the types of river channel and floodplain environments in the Rı́o Guadiamar catchment affected by the spill. The collected data show that the clean-up operations removed enough spill-deposited sediment to achieve pre-spill metal (Ag, As, Cd, Cu, Pb, Sb, Tl, Zn) concentrations in surface sediment. These concentrations, however, are still elevated above pre-mining concentrations, and emphasise that mining continues to contaminate the Agrio-Guadiamar river system. Dilution by relatively uncontaminated sediment appears to reduce metal concentrations downstream but increases in metal and As concentrations occur downstream, presumably as a result of factors such as sewage and agriculture. River water samples collected in May 1999 have significantly greater dissolved concentrations of metals and As than those from January 1999, probably due to greater sulphide oxidation from residual tailings with concomitant release of metals in the warmer early summer months. These concentrations are reduced downstream, probably by a combination of dilution and removal of metals by mineral precipitation. Single chemical extractions (de-ionised water, CaCl₂ 0.01 mol l⁻¹, CH₃COONH₄ 1 M, CH₃COONa 1 M and ammonium oxalate 0.2 M) on alluvial samples from reaches 1 and 6, the tailings, pre-spill alluvium and marl have shown that the order of sediment-borne contaminant mobility is generally Zn>Cd>Cu>Pb>As. Pb and As are relatively immobile except possibly under reducing conditions. Much of the highly contaminated sediment remaining in the floodplain and channel still contains a large proportion of tailings-related sulphide minerals which are potentially reactive and may continue to release contaminants to the Agrio–Guadiamar river system. Our work emphasises the need for pre-mining geomorphological and geochemical data, and an assessment of potential contributions of contaminants to river systems from other, non-mining sources.     

Distribution and enrichment of heavy metals in a sediment core from the Pearl River Estuary

A sediment core collected from coastal zone near the Qiao Island in the Pearl River Estuary was analyzed for total metal concentrations, chemical partitioning, and physico-chemical properties. Three vertical distribution patterns of the heavy metals in the sediment core were identified, respectively. The dominant binding phases for Cu, Pb, Cr, and Zn were the residual and Fe/Mn oxides fractions. Cd in all sediments was mainly associated with exchangeable fraction. Influences of total organic carbon content and cation exchange capacity on the total concentrations and fractions of almost all the metals were not evident, whereas sand content might play an important role in the distributions of residual phases of Cr, Cu, Pb, and Zn. In addition, sediment pH had also an important influence on the Fe/Mn oxides, organic/sulfide and residual fractions of Cr, Cu, and Zn. Contamination assessment on the heavy metals in the sediment core adopting Index of Geoaccumulation showed that Cr, V, Be, Se, Sn, and Tl were unpolluted, while Cu, Ni, Pb, Zn, Cd, and Co were polluted in different degrees throughout the core. It was remarkable that the various pollution levels of the metals from moderate (for Cu, Pb, and Zn) to strong (for Cd) were observed in the top 45 cm of the profiles. The relative decrease of the residual fraction in the upper 45 cm of the core is striking, especially for Zn and Cu, and, also for Pb, and Cr. The change in fraction distribution in the upper 45 cm, which is very much contrasting to the one at larger depths, confirms that the residual fraction is related to the natural origin of these metals, whereas in the upper part, the non-residual fractions (mainly the Fe/Mn oxides fraction) are increased due to pollution in the last decade. The possible sources for Cu, Pb, Zn, and Cd contaminations were attributed to the increasing municipal and industrial wastewater discharges, agricultural runoff, atmospheric inputs, and runoff from upstream mining or smelting activities, which may be associated with an accelerating growth of economy in the Pearl River Delta region in the past decade.     

Environment impact of heavy metals on urban soil in the vicinity of industrial area of Baoji city,P.R. China

Heavy metals in soils are of great environmental concern, in order to evaluate heavy metal contents and their relationships in the surface soil of industrial area of Baoji city, and also to investigate their influence on the soils. Soil samples were collected from 50 sites, and the concentration of Pb, Zn, Cu, Cr, Ni heavy metals and the contents of characteristics in soil from industrial area of Baoji city were determined with X-ray fluorescence method. The concentrations of Pb, Zn, Cu, Cr and Ni in the investigated soils reached the amount of 2,682.00–76,979.42, 169.30–8,288.58, 62.24–242.36, 91.96–110.54 and 36.14–179.28 mg kg⁻¹, respectively. The major element Pb contents of the topsoils were determined. to highlight the influence of ‘anthropic’ features on the heavy metal concentrations and their distributions. To compare, all values of elements were much higher than those of unpolluted soils in the middle of Shaanxi province that average 16.0–26.5, 67.1–120.0, 17.8–57.0, 46.9–65.6 and 24.7–34.6 mg kg⁻¹ for Pb, Zn, Cu, Cr and Ni, respectively. An ensemble of basic and relativity analysis was performed to reduce the precipitate of Pb in soil was extremely high and greatly relativity with other elements. Meanwhile, Pb, Zn, Cu, Cr, Ni heavy metals were typical elements of anthropic activities sources, so it was easy to infer to the tracers of anthropic pollutions from the factorial analysis, which was coming from the storage battery manufactory pollutions. The pollutant distributions were constructed for the urban area which identified storage battery manufactory soot precipitate as the main source of diffuse pollution and also showed the contribution of the topsoils of industrial area of Baoji city as the source point of pollution. Consequently, the impact of heavy metals on soil was proposed and discussed. These results highlight the need for instituting a systematic and continuous monitoring of heavy metals and other forms of pollutants in Baoji city to ensure that pollution does not become a serious problem in the future.     

Geostatistical analyses and fractionation of heavy metals in urban soil from industrial district in Weinan, NW China

The concentrations of metals (Pb, Cr, Ba, Zn, V, Mn, Co, Cu, Ni and As) in 38 soil samples collected from the industrial district in Weinan (NW China) were determined by wavelength dispersive X-ray fluorescence spectrometry. The magnetic parameters of soil including low-/high-frequency susceptibility and frequency-dependent susceptibility were measured. The modified three-step BCR sequential extraction procedure was used to evaluate mobility, availability and persistence of trace elements in urban soil samples. Multivariate (principal component analysis, clustering analysis and correlation analysis) and geostatistical analysis (ArcGIS tools) were applied to the obtained data to evaluate the analytical results and to identify the possible pollution sources of metals as well as geo-spatial distributions. The results revealed that the sampling area was mainly influenced by two main sources: (1) Ba, Cu, Pb, Cr and Zn were mainly derived from industrial sources, which combined with coal combustion as well as traffic factor. The mobility sequence based on the sum of the BCR sequential extraction stages was: Pb (53.79 %) > Zn (51.78 %) > Cu (50.96 %) > Ba (42.59 %) > Cr (18.47 %). Pb was the metal predominantly associated (~46.86 %) with the form bound to Fe/Mn oxides, and the highest percentage of Zn was exchangeable and carbonate-bound fraction. Cu was present mainly in organic fraction, while the residual fraction was the most dominant solid phase pool of Cr (~81.53 %) and Ba (~57.41 %). (2) Mn, V, Co, As and Ni in the study area were consistently from natural sources. The analysis of enrichment factors indicated that urban soils in Weinan City were classified as having significant enrichment by Ba, Cu, Pb, Cr and Zn. The overall results proposed the future tactics for Weinan environment quality control on a local scale that concerned not only the levels of risky, but also the industrial emission abatement techniques as well as urban setting.     

A comparison of geochemical information obtained from two fluvial bed sediment fractions

 A total of 121 bed sediment samples were collected from a 5.8-km stretch of Manoa Stream, Hawaii. Samples were physically partitioned into two grain-size fractions, <63 μm and 63–125 μm, acid digested and analyzed by ICP-AES and FAAS. Non-parametric matched-pair statistical testing and correlation analysis were used to assess differences and strengths of association between the two fractions for Al, Ba, Cu, Fe, Mn, Ni, Pb, Ti and Zn. Results indicated statistically significant differences between fractions for all elements except Mn. Concentrations were significantly greater in the <63 μm fraction for Al, Cu, Pb, Ti and Zn, while Ba, Fe and Ni were higher in the 63–125 μm fraction. Though some elements had statistically significant differences between fractions (Al, Ba, Fe and Zn) percentage differences were in the range of analytical precision of the instrument and thus differences were not practically significant. Correlation analysis indicated strong positive associations for all elements between the two fractions (p<0.0001). Three contamination indices indicated similar degrees of pollution for each size fraction for four elements having an anthropogenic signal (Ba, Cu, Pb and Zn). The environmental information obtained from the 63–125 μm fraction was essentially equivalent to that from the <63 μm fraction. In this system it is clear that both bed sediment fractions indicate anthropogenic enrichment of trace metals, especially Pb, and further supports previous research that has found that aquatic sediments are critical median for tracing sources of pollution. Received: 17 August 1998 · Accepted: 30 October 1998     

Distribution and assessment of sediment toxicity in Tamaki Estuary,Auckland, New Zealand

Heavy metal levels in surface sediments from Tamaki Estuary demonstrate significant up estuary increases in Cu, Pb, Zn, Cd and mud concentrations. Increased metal levels towards the head of the estuary are linked to local catchment sources reflecting the historical development, industrialisation and urbanisation of catchment areas surrounding the upper estuary. The relatively narrow constriction in the middle estuary (Panmure area), makes it susceptible to accumulation of upper estuary pollutants, since the constriction reduces circulation and extends the time required for fine waterborne sediments in the upper estuary to exchange with fresh coastal water. As a result fine fraction sediments trapped in the upper estuary facilitate capture and retention of pollutants at the head of the estuary. The increase in sandy mud poor sediments towards the mouth of the estuary is associated with generally low metal concentrations. The estuary’s geomorphic shape with a mid estuary constriction, sediment texture and mineralogy and catchment history are significant factors in understanding the overall spatial distribution of contaminants in the estuary. Bulk concentration values for Cu, Pb, Zn, and Cd in all the studied surface samples occur below ANZECC ISQG-H toxicity values. Cd and Cu concentrations are also below the ISQG-L toxicity levels for these elements. However, Pb and Zn concentrations do exceed the ISQG-L values in some of the surface bulk samples in the upper estuary proximal to long established sources of catchment pollution.     

Distribution and chemical speciation of heavy metals in the surficial sediments of the Bak?r?ay and Gediz Rivers, Eastern Aegean

The pollution of aquatic ecosystem by heavy metals has assumed serious proportions due to their toxicity and accumulative behaviour. The toxicity and fate of the water borne metal is dependent on its chemical form and therefore quantification of the different forms of metal is more meaningful than the estimation of its total metal concentrations. A five-step sequential extraction procedure was applied for the determination of the distribution of seven elements (Pb, Cr, Cu, Mn, Zn, Ni, Fe) in sediment samples collected from Bakır?ay and Gediz Rivers. According to this study, the results of metals are mostly retained in the residual, oxidizable and reducible fractions. Based on the chemical distribution of metals, we found that Cr, Zn, Cu and Ni are the most non-mobile metals. Pb is the metal that showed the highest percentages in the residual and reducible fractions. Mn is present in the higher percentages in the reducible and carbonate fractions. However, Fe is present in the greatest percentages in the residual fraction, which implies that these metals are strongly linked to the sediments. The risk assessment code as applied to the present study shows that about 12.3–26.9 and 15.7–33.5% of manganese at most of the sites exist in carbonate fraction in the Bakır?ay and Gediz Rivers, respectively. Therefore, Mn comes under the medium risk category in the Bakır?ay and high-risk category in the Gediz River. Speciation pattern of Cu, Zn, Pb, Cr, Ni, Fe shows low to medium risk to aquatic environment health in both rivers.     

Comprehensive evaluation of heavy metal contamination in surface and core sediments of Taihu Lake, the third largest freshwater lake in China

The spatial and temporal variations of Fe, K, Co, V, Cr, Cu, Ni, Zn, and Pb were determined in the sediments of Taihu Lake, the third largest freshwater lake in China and categorized into natural origin (Fe, K, Co, and V) and human contamination (Cr, Cu, Ni, Zn, and Pb) groups by principal component analysis. Most of the metals were positively correlated with the clay content (<4???m) and negatively correlated with the >16???m fraction, indicating the dominant role of grain size in regulating metals concentrations. Geochemical normalization and enrichment factors (EFs) were introduced to reduce the confounding of variable grain size and to quantify anthropogenic contributions. Higher EF values for Cr, Cu, Ni, and Zn occurred in the north Zhushan, Meiliang, and Gonghu Bays, indicating a high level of human contamination from the northern cities, such as Wuxi and Changzhou. Higher EF values of Pb were also present in the southwest and east lake areas, denoting the existence of additional anthropogenic sources. Chrome, Cu, Ni, Zn, and Pb showed increasing EF values in the top layers of sediment cores, indicating enhancing contamination since 1970s with rapid economy development in the catchment. These results indicate that geochemical normalization is a necessary and effective method in quantifying heavy metals contamination, and that historic sediment should be used as background values in calculating EFs. Potential risks of the heavy metals were assessed linking the consensus-based sediment quality guidelines and human contamination. Concentrations of Ni and Cr are greater than the threshold effect concentration (TEC) values, even in the sediments before 1970s, due to higher background concentrations in terrestrial parent materials. Concentrations of Ni and Cr are generally lower than the probable effect concentration (PEC) values, and concentrations of Cu and Zn are below the TEC values in the open lake areas. Whereas, concentrations of Ni and Cr are surpassing the PEC values and Cu and Zn are surpassing the TEC values in the north bays due to the high level of human contamination, where they were with EFs over 1.2, denoting higher potential eco-risks.     

Trace element distributions in aquatic sediments of Danang – Hoian area, Vietnam

 Distribution of the trace elements Cr, Cu, Ni, Pb and Zn in surficial sediments of the river/sea environment in Danang – Hoian area (Vietnam) was investigated to examine the degree of metal pollution caused by anthropogenic activities. Point sources from domestic and industrial wastes are identified as dominant contributors of trace element accumulation. Surficial sediments of Hoian River show extremely high total concentrations of Cu (Average Concentration 295 μg/g), Ni (AC 112 μg/g), Pb (AC 396 μg/g) and Zn (AC 429 μg/g) that exceed assigned safety levels ER-M. Similarly, the sediments of Han River show high Pb (AC 188 μg/g) and Zn (AC 282 μg/g) contents. In marine sediments of Thanhbinh beach Pb is also enriched (138 μg/g) above guideline levels. In contrast the sediments of the Cude River are dominated by trace element concentrations close to background values. Received: 17 December 1998 · Accepted: 6 May 1999     

Trace metals (Cd,Pb, Cu,Zn and Ni) in sediment of the submarine pit Dragon ear (Soline Bay,Rogoznica, Croatia)

Vertical profiles of trace metal (Cd, Pb, Zn, Cu, Ni) concentrations, organic matter content, carbonate content and granulometric composition were determined in two sediment cores from the submarine pit Dragon Ear (Middle Adriatic). Concentrations of the analyzed metals (Cd: 0.06–0.12 mg kg⁻¹, Pb: 28.5–67.3 mg kg⁻¹, Zn: 17.0-65.4 mg kg⁻¹, Cu: 21.1–51.9 mg kg⁻¹, Ni: 27.8–40.2 mg kg⁻¹) were in usual range for Adriatic carbonate marine sediments. Nevertheless, concentrations of Cu, Zn, and especially Pb in the upper layer of sediments (top 12 cm) were higher than in bottom layer, while Cd and Ni concentration profiles were uniform. Regression analysis and principal component analysis were used to interpret distribution of trace metals, organic matter and carbonate content in sediment cores. Results of both analysis showed that concentrations of all trace metals in the core below the entrance to the pit were significantly positively correlated with organic matter and negatively correlated with carbonate, while in the core more distant from the entrance only Pb showed significant positive correlation with organic matter. Obtained results indicated that, except for lead which was enriched in surface sediment, in the time of sampling (before the building of the nautical marina) investigated area belonged to unpolluted areas.     

Sedimentary geochemical record of historical anthropogenic activities affecting Guanabara Bay (Brazil) environmental quality

A sediment core from Guanabara Bay (Brazil) was analyzed for ²¹⁰Pb dating, grain size, total organic carbon (TOC) and total nitrogen, carbon stable isotope ratio (δ¹³C), nitrogen stable isotope ratio (δ¹⁵N) and the metals Fe, Mn, Ni, Co, Cu, Pb, V and Zn, to assess the influence of land use changes on the aquatic system in a region for which large industrial and urban development is expected in the next few decades. To obtain baseline data for improving the monitoring of the expected increase in anthropogenic impacts from surrounding drainage basins, a multivariate analysis of data from different sediment layers was carried out to evaluate the dated sediment record. The geochemical data suggested three different sedimentary phases along the last 200 years. Before the 1880s, the highest clay and TOC contents were observed, where the C/N ratios and the δ¹³C values suggested a mixture of algal and terrestrial organic matter and the lowest concentrations of Co, Cu, Pb, V and Zn, for which background levels were estimated (4.6, 2.7, 14.9, 24.3 and 70.2 mg kg⁻¹, respectively). From the 1880s to the 1950s, the metal concentrations and sand particles increased, but no change in organic matter quality was observed, reflecting a period of land use change, still without significant sewage input. After the 1950s, the sedimentation rate increased from 0.42 to 0.77 cm year⁻¹ and increasing urban sewage input was evidenced by lower C/N ratios, higher δ¹⁵N, decrease of Fe and Mn concentrations and increased fluxes of metals and TOC, which showed a good relationship with population growth data.     

Metal fluxes to the sediments of the Moulay Bousselham lagoon,Morocco

The metal content in surface sediments (0–2 cm, 26 samples), in a sediment core (120, 1 cm slices), taken from Moulay Bousselham (Morocco) was investigated. Concentrations of Al, Fe, Mn, Pb, Zn, Cu, Ni, Cr, Cd, As, and Hg were evaluated in surface and cored sediments of Moulay Bousselham lagoon. Significantly high concentrations in μg g⁻¹ dw of Pb (31.7–6.2), Zn (758.9–167), Cu (310.7–22), Ni (96–10.5), Cr (113–18.9), Cd (0.84–0.02), As (1–0.1), and Hg (0.61–0.02) were found in sediment samples from Moulay Bousselham lagoon. Calculated enrichment factors [EF_Me = (Me/Al)_sample/(Me/Al)_background], using Al as a normalizer, and correlation matrices showed that metal pollution in Merja Zerga of Moulay Bousselham lagoon was the product of anthropogenic sources, while the metal content in Merja Kehla was of natural origins. The results suggest that a major change in the sedimentary regime of the lagoon, associated with internal trapping and re-distribution of heavy metal, has been occurring in the past few decades. The cause would appear to be the construction of a Nador Canal at the lagoon. Probable effects concentrations (PEC) were often exceeded for heavy metals in the lagoon sediments, especially for Zn, Cu, Ni, and Cr, and four stations, stations MZ-11, MZ-12, MZ-13, MZ-14, MZ-16, and MZ-17, had multiple metals at presumptively toxic levels. These comparisons suggest that sediment metal levels in the river are clearly high and probably pose an environmental risk at some stations. The levels of most of the metals were not greatly enriched, a consideration that is of the utmost importance when contamination issues are at stake. Metal concentrations found in Moulay Bousselham lagoon were comparable to aquatic systems classified as contaminated from other regions of the world.