Research on 3D marine electromagnetic interferometry with synthetic sources for suppressing the airwave interference

In order to suppress the airwave noise in marine controlled-source electromagnetic （CSEM） data, we propose a 3D deconvolution （3DD） interferometry method with a synthetic aperture source and obtain the relative anomaly coefficient （RAC） of the EM field reflection responses to show the degree for suppressing the airwave. We analyze the potential of the proposed method for suppressing the airwave, and compare the proposed method with traditional methods in their effectiveness. A method to select synthetic source length is derived and the effect of the water depth on RAC is examined via numerical simulations. The results suggest that 3DD interferometry method with a synthetic source can effectively suppress the airwave and enhance the potential of marine CSEM to hydrocarbon exploration.     

一维垂直各向异性介质频率域海洋可控源电磁资料反演方法

本文提出了一维垂直各向异性(VTI)介质倾斜偶极源频率域海洋可控源电磁(CSEM)资料高斯-牛顿反演方法.在电阻率各向异性介质水平偶极源和垂直偶极源海洋CSEM正演算法的基础上,利用欧拉旋转方法,实现了各向异性介质倾斜偶极源海洋CSEM正演算法.海洋可控源电磁场关于地下介质横向电阻率(ρ_h)和垂向电阻率(ρ_v)的偏导数(即灵敏度矩阵)是解析计算的,结合垂直各向异性介质横向电阻率与垂向电阻率的关系,将各向异性率融入到正则化因子选择中,实现了正则化因子的自适应选择.理论模型合成数据和实测资料反演算例表明,我们提出的反演方法能够较准确的重构海底围岩和基岩的各向异性电阻率以及高阻薄层的埋藏深度、厚度和垂向电阻率.     

一维电阻率各向异性对海洋可控源电磁响应的影响研究

地下介质的电阻率常常表现为各向异性,海底裂隙地层和层状沉积序列可能形成宏观电阻率各向异性.在解释海洋电磁资料时,电阻率各向异性的影响不应该被忽略,否则可能会得到错误的海底地电模型.作者编写了电阻率任意各向异性一维层状介质海洋可控源电磁场计算程序,计算了电阻率各向异性层状模型的海洋可控源电磁响应,讨论了覆盖层和高阻储层分别具有电阻率各向异性时的电磁场响应特征.     

Petroleum Electromagnetic Prospecting Advances and Case Studies in China

Remarkable progress has been made in electromagnetic (EM) techniques as applied to the petroleum industry in instruments, data acquisition, and processing and interpretation in China. Included here is equipment, such as high-power Controlled Source EM (CSEM) acquisition systems, acquisition methods, such as the three dimensional small-bin Continuous Electromagnetic Array acquisition method, Time and Frequency Domain Controlled Source Electromagnetic, Borehole-to-surface Electromagnetic technique and marine magnetotelluric method. Data processing methods, such as fast three dimensional inversion using nonlinear conjugate gradients, and data interpretation methods, like Induced Polarization and Resistivity anomalies for hydrocarbon detection, are also included. These new techniques have been applied in petroleum survey and many cases are in complicated areas. They have successfully served the investigation of deep igneous rock reservoirs, and prediction of potential hydrocarbon targets. The cases indicate that electromagnetic techniques can help seismic survey to effectively detect hydrocarbon reservoir and remarkably improve drilling successes.     

海洋天然气水合物可控源电磁法的响应特征:一维正演模拟

We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.     

海洋CSEM的共中心点域快速反演

海洋可控源电磁法(CSEM)对海底高阻体的反映比较灵敏,可用于天然气水合物探测资料的定性解释和反演研究.海洋CSEM资料的共中心点(CMP)域转换方式,可在横向上较好地分辨高阻储层.本文提出在CMP域实现一维频率域海洋可控源电磁资料高斯-牛顿反演算法.鉴于一维反演是解释地球物理资料的基础,较于二维和三维反演方法有着更高的计算效率和更低的硬件要求,将二维模型的响应在CMP域单元内表达为一维模型的响应,进而运用一维高斯-牛顿反演解释二维海洋CSEM资料.模型数据试算表明,海洋CSEM的CMP域反演速度较快,能够实现二维CSEM资料的反演解释.     

Marine Electromagnetic Studies of Seafloor Resources and Tectonics

The past decade has been a period of rapid growth for marine electromagnetic (EM) methods, predominantly due to the industrial adoption and promotion of EM as a valuable tool for characterizing offshore hydrocarbon reservoirs. This growth is illustrated by a database of marine EM publications spanning from the early developments in the 1960’s to the present day; while over 300 peer-reviewed papers on marine EM have been published to date, more than half of these papers have been published within the last decade. This review provides an overview of these recent developments, covering industrial and academic use of marine EM for resource exploration and tectonic investigations, ranging from acquisition technology and modeling approaches to new physical and geological insights learned from recent data sets.     

Future Directions of Electromagnetic Methods for Hydrocarbon Applications

For hydrocarbon applications, seismic exploration is the workhorse of the industry. Only in the borehole, electromagnetic (EM) methods play a dominant role, as they are mostly used to determine oil reserves and to distinguish water from oil-bearing zones. Throughout the past 60 years, we had several periods with an increased interest in EM. This increased with the success of the marine EM industry and now electromagnetics in general is considered for many new applications. The classic electromagnetic methods are borehole, onshore and offshore, and airborne EM methods. Airborne is covered elsewhere (see Smith, this issue). Marine EM material is readily available from the service company Web sites, and here I will only mention some future technical directions that are visible. The marine EM success is being carried back to the onshore market, fueled by geothermal and unconventional hydrocarbon applications. Oil companies are listening to pro-EM arguments, but still are hesitant to go through the learning exercises as early adopters. In particular, the huge business drivers of shale hydrocarbons and reservoir monitoring will bring markets many times bigger than the entire marine EM market. Additional applications include support for seismic operations, sub-salt, and sub-basalt, all areas where seismic exploration is costly and inefficient. Integration with EM will allow novel seismic methods to be applied. In the borehole, anisotropy measurements, now possible, form the missing link between surface measurements and ground truth. Three-dimensional (3D) induction measurements are readily available from several logging contractors. The trend to logging-while-drilling measurements will continue with many more EM technologies, and the effort of controlling the drill bit while drilling including look-ahead-and-around the drill bit is going on. Overall, the market for electromagnetics is increasing, and a demand for EM capable professionals will continue. The emphasis will be more on application and data integration (bottom-line value increase) and less on EM technology and modeling exercises.     

可控源海洋电磁勘探中空气波影响的理论分析和数值模拟

可控源海洋电磁勘探(MCSEM)中空气波对海底电磁响应的影响已为业界所熟知,且已提出了多种压制方法.然而,由于空气波与海水层中其它信号相互作用的复杂性,至今其作用机理及对有效信号的影响方式尚未完全清楚,这也阻碍了浅水域MCSEM油气勘探的应用.本文在前人研究的基础上, 基于一维层状介质的电磁位和电磁场分析,采用电磁场的模式分解理论导出了空气、海水层和海底地层之间的相互作用关系.分析了MCSEM电磁响应的影响因素和空气波的作用机理.以无限水深假想模型、三层介质模型和四层介质模型为基础,导出了水平电偶极子(HED)的横电(TE)和横磁(TM)模式的电磁场关系,分析显示了前人提出的上下行波分离进行空气波压制所存在的缺陷.通过理论和数值模拟知道, 利用横电(TE)和横磁(TM)模式受空气相互作用影响的差异和电磁场水平分量与垂直分量受空气层相互作用影响程度的不同可减弱空气波对有效信号的影响,这将有助于实现浅水域海洋电磁勘探数据的有效利用.     

基于高斯牛顿法的频率域可控源电磁三维反演研究

三维反演解释是电磁法勘探发展的重要趋势,而如何提高三维反演的可靠性、稳定性和计算效率是算法开发者们目前的研究重点.本文实现了一种频率域可控源电磁(CSEM)三维反演算法.其中正演基于拟态有限体积法离散化,利用直接矩阵分解技术来求解大型线性系统方程,不仅准确、稳定,而且特别有利于含有大量发射场源位置的CSEM勘探情况;对目标函数的最优化采用高斯牛顿法(GN),具有近似二次的收敛性;使用预条件共轭梯度法(PCG)求解每次GN迭代所得到的法方程,避免了显式求解和存储灵敏度矩阵,减小了计算量.以上这些方法的结合应用,使得本文的三维反演算法准确、稳定且高效.通过陆地和海洋CSEM勘探场景中的典型理论模型的反演测试,验证了本文算法的有效性.     

Induced polarization in a 2.5D marine controlled-source electromagnetic field based on the adaptive finite-element method

The induced polarization (IP) in rocks and minerals is of significance to the marine controlled-source electromagnetic (CSEM) field. We propose an adaptive finite-element algorithm for the 2.5D frequency-domain forward modeling of marine CSEM that considers the induced polarization. The geoelectrical model is discretized using an unstructured triangular elemental grid that accommodates the complex topography and geoelectrical structures. We use the Cole–Cole model to describe the IP and develop a complex resistivity forward modeling algorithm. We compare the simulation results with published 1D model results and subsequently calculate the electromagnetic field for variable azimuth sources, IP parameters, and topography. Finally, we analyze the IP effect on the marine CSEM field and show that IP of oil reservoirs and topography affects the marine CSEM electromagnetic field.     

陆地可控源电磁法探测效果的频率响应

陆地可控源电磁法的观测资料可依据频段范围近似地划分为近区场、中间区场及远区场,但采用测量相互正交电、磁分量,并计算视电阻率的资料处理方式只适用于远区场数据.为更有效地利用陆地可控源电磁法不同区间场的观测资料,本文结合三维数值模拟技术并采用电场分量直接进行反演的策略,对不同区间电场的响应特征与探测效果进行了分析.数值模拟结果表明:近区电场的异常响应最明显,异常响应不随频率发生显著变化,但纵向分辨能力差;远区电场异常响应随频率发生显著变化,其探测深度取决于频率的高低;中间区场较为复杂,地表电场异常响应的等值线中心并不是位于异常体中心正上方,而是在沿场传播方向上向异常体与围岩的分界面处偏移,并且发现中间区场资料的加入会影响反演结果的准确性.综合合成数据和野外实测资料的反演结果,发现结合近区场和远区场资料而舍弃中间区场资料的反演效果更佳,这为陆地可控源电磁法资料的反演解释提供了一种有效途径.     

海底可控源电磁接收机及其水合物勘查应用

海洋可控源电磁法在国外已成为海底天然气水合物调查的有效手段之一.为实现我国海域深水条件下水合物的海洋可控源电磁探测,本文从方法原理出发,采用低功耗嵌入式控制、前端低噪声斩波放大、高精度时间同步和水声通讯等技术,设计并开发了由承压舱、玻璃浮球、采集电路、电场与磁场传感器、姿态测量装置、声学释放器、USBL定位信标、测量臂、水泥块等部件组成的海底可控源电磁接收机,实现了海洋微弱电磁场信号的高精度采集.海底可控源电磁接收机具有高可靠性、低噪声、低功耗和低时漂的特点.利用研制的海底可控源电磁接收机,在琼东南海域进行水合物勘查,采集得到了可靠的人工源电磁场数据.通过数据处理及反演,获得了研究区海底的电阻率模型,结合地震资料,对高阻异常体进行推断解释,其结果为天然气水合物钻探井位布置提供了电性依据.     

A scaled experiment for the verification of the SeaBed Logging method

SeaBed Logging (SBL) is an application of the marine controlled source electromagnetic (CSEM) method that is used to directly detect and characterize possible hydrocarbon-bearing prospects. Although the CSEM method has been used by academia for more than three decades, the application as a direct hydrocarbon indicator was first introduced about five years ago. The central idea of SBL is the guiding of electromagnetic energy in thin resistive layers within conductive sediments. Even if it has been well known for a long time that electromagnetic signals can propagate from a conductive region to another via resistive regions such as air or resistive parts of the lithosphere, the application to hydrocarbon exploration has not been developed until recently. This might be due to the uncertainty of getting any significant response from thin resistive layers such as hydrocarbon reservoirs since electromagnetic energy is highly attenuated in conductive sediments. Thus, during the early development phase of the SBL technique, a scaled laboratory experiment was performed to validate if a thin resistive layer (e.g. hydrocarbons) buried within conductive media (e.g. sediments) could be remotely detected by using electric dipoles as sources and receivers. Data from this experiment were compared to a forward modelling code for layered media, and the comparison showed good agreement between experimental and theoretical results. This suggested that thin resistive layers buried in conductive media are detectable due to the guiding of the electromagnetic field within the resistor. The successful results were vital for realizing the application of marine CSEM as a hydrocarbon exploration technique. We here present the results of the first scaled SBL experiment.     

时频方向谱分析在海洋电磁数据处理中的应用

海底采集到的电磁数据按照其主要包含的信息及研究目的大致可分为海洋可控源电磁场(CSEM)信号、天然场源大地电磁场(MT)信号、海洋环境电磁场信号以及其他随机干扰信号.常常通过计算功率谱密度、时频分析和极化分析的方法研究海洋电磁场特征.本文介绍一种新方法——时频方向谱分析法及其在实测海洋电磁数据处理中的应用,该方法能够在一定的时间-频率尺度上有效分辨场源信号的运动方向.对于海洋CSEM数据,利用该方法可以估算发射源的运动方向,进而在发射源或采集站方位信息缺失情况下,实现海洋CSEM数据的旋转电性轴处理.对于海洋电磁数据,利用该方法可以详细分析海水运动感应电磁场的信号特征.     

Three-Dimensional Electromagnetic Modelling and Inversion from Theory to Application

The whole subject of three-dimensional (3-D) electromagnetic (EM) modelling and inversion has experienced a tremendous progress in the last decade. Accordingly there is an increased need for reviewing the recent, and not so recent, achievements in the field. In the first part of this review paper I consider the finite-difference, finite-element and integral equation approaches that are presently applied for the rigorous numerical solution of fully 3-D EM forward problems. I mention the merits and drawbacks of these approaches, and focus on the most essential aspects of numerical implementations, such as preconditioning and solving the resulting systems of linear equations. I refer to some of the most advanced, state-of-the-art, solvers that are today available for such important geophysical applications as induction logging, airborne and controlled-source EM, magnetotellurics, and global induction studies. Then, in the second part of the paper, I review some of the methods that are commonly used to solve 3-D EM inverse problems and analyse current implementations of the methods available. In particular, I also address the important aspects of nonlinear Newton-type optimisation techniques and computation of gradients and sensitivities associated with these problems.     

基于微增模型的海洋可控源电磁法三维非结构化矢量有限元数值模拟

为了分析海洋中含金属矿的储油气砂层的成分、结构对于海洋可控源电磁场的影响特征,引入多相微增等效介质模型,结合非结构化网格实现了海洋可控源电磁三维矢量有限元正演.首先对多相微增模型进行了介绍,并分析不同参数影响下的等效电导率变化特征.而后,详细推导了频率域可控源电磁法非结构化矢量有限元方程.接着,利用预处理的IDR （s）迭代算法求解线性方程组.最后设计典型的海洋地电模型,通过正演计算,验证了本文算法的正确性和有效性,同时研究了海洋储油砂层中的金属矿的含量、孔隙度、含水饱和度等参数对于可控源电磁场响应特征的影响.     

考虑海底地形的三维频率域可控源电磁响应有限体积法模拟

为了提高海洋可控源电磁的地形响应模拟精度,探讨了三维交错网格剖分有限体积法求解频率域电磁场解的数值方法.在似稳场近似条件下,推导了有限差分法和有限体积法低频电磁场控制方程的离散表达式.通过对离散表达式的分析比较表明,有限体积法较之有限差分具有更高的计算精度,同时也具有与有限差分相当的计算效率.对含地形界面网格单元电导率采用加权平均处理,通过与二维有限元程序的计算结果对比,验证了该方法可以有效提高有限体积法对地形变化的模拟精度.应用有限体积法计算了一个三维带地形储层模型的可控源电磁响应,分析表明地形变化对电场分量影响明显,磁场分量对地形变化不敏感.     

起伏海底地形时间域海洋电磁三维自适应正演模拟

本文基于自适应非结构有限元算法实现海洋电磁起伏海底地形三维正演模拟.通过采用隐式后推欧拉时间离散技术,保证在较大的时间步长条件下获得正确结果.为获得多时间道海洋电磁正演模拟的有效网格,我们采用基于法向电流连续的后验误差估计的自适应方法和网格融合技术;同时为了控制网格数量和保证正演模拟稳定性,我们还在网格融合过程中应用了随机网格挑选技术.对于方程组求解我们使用MUMPUS直接求解器.当时间步长不变时,只需对系数矩阵进行一次分解,大大提高计算速度.将本文计算结果与半空间模型解析解进行对比,验证了本文算法精度.针对海洋电磁半拖曳式和双船拖曳式工作方式,我们通过典型模型的模拟计算,研究海底地形影响及海底高阻层识别特征.     

电导率各向异性的海洋电磁三维有限单元法正演

本文提出了一种基于非结构化网格的海洋电磁有限单元正演算法.为了回避场源奇异性,文中选用二次场算法,将背景电阻率设置为水平层状且各向异性,场源在水平层状各向异性介质中所激发的一次场通过汉克尔积分得到.基于Coulomb规范得到二次矢量位和标量位所满足的Maxwell方程组,通过Galerkin加权余量法形成大型稀疏有限元方程,采用不完全LU分解(ILU)预条件因子的quasi-minimum residual(QMR)迭代解法对有限元方程进行求解得到二次矢量位和标量位;进而,利用滑动平均方法得到二次矢量位和标量位在空间的导数,由此得到二次电磁场;通过一维模型对算法的可靠性进行验证,与此同时,针对实际复杂海洋电磁模型,比较有限元模拟结果与积分方程模拟结果,进一步验证算法精度.若干计算结果均表明,文中算法具有良好的通用性,适用于井中电磁、航空电磁,环境地球物理等非均匀且各向异性介质中的电磁感应基础研究.