Can Nassarius reticulatus be used as a bioindicator for Hg contamination? Results from a longitudinal study of the Portuguese coastline

The focus of this work is to explore the use of the netted whelk, Nassarius reticulatus (L.), as an indicator of mercury (Hg) contamination, by assessing the concentration of Hg in the sediments and in the whelk along the entire Portuguese coast. Total Hg concentrations ranged from below the detection limit (0.01 ng absolute mercury) up to 0.87 mg kg(-1) dry weight (dwt) in sediments and between 0.06 and 1.02 mg kg(-1) (dwt) for organisms, with no significant differences between males and females. Although organic mercury was not detected in the sediments, it represented, on average, 52% of the total Hg in the whelk tissues, and as high as 88% in some cases, suggesting mercury accumulation from dietary intake. Significant negative correlations were found between the total Hg concentrations in the sediments and the log(10) of Hg concentrations in whelk tissues males (r=-0.64; P<0.01) and females (r=-0.52; P<0.01) indicating that the species is a poor indicator of Hg contamination. Nevertheless, since the highest concentrations of organic mercury in the whelk tissues were found in the least contaminated areas, this species must be highly relevant in the trophic web, namely on the possible biomagnification of mercury. The high dietary mercury accumulation from feeding on carrion and the low bioavailability of mercury to whelks in estuarine sediments may be the basis of the mercury accumulation pattern in N. reticulatus.     

Can the desert bloom? Lessons learned from the Israeli case

Despite the central management of Israel's water resources and the highly planned strategy for a sustainable water supply, Israel has twice faced an acute water crisis during the past decade. Although the visible problem is related to a lack of additional quantities of water, the deterioration of water quality appears to be endangering the future use of available water quantities as well. A long-term policy of ground water mining (translated to salt water encroachments), and irrigation with relatively saline water and recycled waste water, among other damage, account for this deterioration. Enhanced flushing of the salt and contaminant load from the aquifers (using various techniques) is proposed as a solution to the problem.     

Can be the environmental and biotic factors responsible for macroinvertebrate communities’ alterations in Portuguese alpine ponds?

Alpine ponds are shallow waterbodies formed in alpine zones characterized by usual pristine conditions, however subject to harsh conditions that enable the emergence of unique communities with high conservational value. Therefore, it is important to gather information about these ecosystems and understand the changes in the biota. This work aimed to use Portugal’s alpine ponds as a case of study in assessed the macroinvertebrates communities in the Mediterranean ecozone. To fulfill this goal, we aimed to understand the alterations on macroinvertebrates community and how are they modulated by environmental variables. Five alpine ponds in Serra da Estrela (Portugal) were studied for one year. Macroinvertebrate communities and physical and chemical water parameters were determined in June/16, October/16, and April/17. Water chemistry values were similar to other studied lentic waterbodies in alpine zones in Europe, with slightly acidic water and low conductivity. Although accentuated macroinvertebrates differences between ponds, no significant differences in diversity were recorded, indeed the main differences recorded were influenced by ponds habitat types and environmental variables. Canonical Correspondence Analysis showed differences in the communities between ponds, namely the high influence of several physical and chemical parameters (conductivity, phosphate content, and pH) in the macroinvertebrates community composition. Indeed, Spearman’s correlation revealed significant interaction in diversity, abundance and richness of macroinvertebrates and several physical and chemical parameters (pH, dissolved oxygen and nitrates concentration).     

Method for Determining the Ultimate Strain for Rocks of the Earth’s Crust from the Magnitude of Relative Slips on the Earth’s Surface after a Strong Earthquake

The ultimate strain value for rocks in aggregate with their other physicomechanical characteristics plays a substantial role when solving different problems related to the bearing capacity and behavior of soils. These include determination of the maximum displacement, velocity, and acceleration values of soils during earthquakes and estimation of the potential strain energy accumulated in a medium during strong earthquake preparation. The latter parameter is also key in predicting earthquakes from the ultimate strain of rocks. The paper describes a technique developed by the author for determining the ultimate strain of soil columns under natural conditions from their relative slope on the surface after a strong earthquake. The empirical dependences of the ultimate strain of rocks on earthquake magnitude, relative slip, rupture length, and the seismic moment are obtained by analyzing their values calculated by the proposed method for 44 strong earthquakes with magnitudes of 5.6–8.5. A comparative analysis of the ultimate strain values obtained by other researchers by geodesic triangulation is performed.     

Could surface roughness be a poor proxy for landslide age? Results from the Swabian Alb,Germany

The potential of surface roughness to quantify geomorphological landforms and processes has been enhanced with the availability of high‐resolution digital terrain models (DTM). Recent studies that attempt to identify landslide features with surface roughness have suggested that this measure of topographic heterogeneity may also be applied to estimate the relative age of landslides. This is a provisional study that explores the potential of this relationship by assessing the ability of surface roughness to act as a proxy for relative landslide age. The surface roughness for a set of 12 dated landslides in the Swabian Alb that occurred between 1789 and 1985 was calculated from a 1 m² spatial resolution LiDAR DTM with three algorithms: root‐mean‐square‐height (RMSH), standard deviation of slope (SDS), and direction cosine eigenvalue ratios (DCE). Scale‐dependence was analysed by calculating surface roughness for a range of moving window sizes (3 × 3, 5 × 5, 9 × 9 and 15 × 15), and surface roughness for each landslide was summarized by the median and upper quartile. Only weak correlations (best Spearman's rho 0.58) were present between landslide age and surface roughness. This correlation becomes weaker with increasing moving window size. Given weak observed associations and discussed challenges pertaining to the complexities of landslide morphology change over time, we currently find that surface roughness alone may not be justifiable to act as a proxy for landslide age for our study region. Furthermore, we recommend future studies should focus on addressing possible natural and anthropogenic factors such as land use change that may alter surface roughness. These studies may focus on one of the three roughness measures used here as they are strongly correlated. Copyright © 2014 John Wiley & Sons, Ltd.     

What compensates the topography of southern Norway? Insights from thermo-isostatic modeling

The origin of the high topography of the Norwegian Mountains is currently much debated. Several geophysical studies show that the uppermost mantle below southern Norway has anomalously low velocities as compared to other parts of the Baltic Shield. This study aims to shed lights on the structure of the lithospheric mantle below southern Norway by adapting and further refining a method based on isostatic and thermal equilibrium to compute temperature, temperature-related density and synthetic S-wave velocity in stable continental domains. The one-dimensional steady-state heat equation is used with topographic, Moho depth, crustal density and surface heat flow data. A condition of local isostasy is assumed and geoid undulations are used to constrain the range of possible lithosphere models.Results derived from this method suggest a thickening of the thermal lithosphere below southern Norway from west to east. The western part is found to have higher temperatures, lower densities and lower synthetic S-wave velocities than the eastern part, compatible with results from a recent P-wave travel time residual study. Comparison of the synthetic shear-velocity profiles beneath southwestern Norway with velocity profiles inverted from Rayleigh wave dispersion data suggests that the higher temperatures associated with a thinner lithosphere can explain parts of the seismic low-velocity anomaly.The inferred lithospheric structure is sensitive to uncertainties in the crustal input model, but the main features remain undisturbed by changes in the input data. The results show that the lithosphere of southwestern Norway can be in local isostatic equilibrium, if it is thinner and warmer than the lithosphere of eastern Norway. The present-day high topography may therefore be partially sustained by lower densities in the mantle lithosphere.     

Can the Waves Generated by Fast Ferries be a Physical Model of Tsunami?

The potential of long ship-induced waves to serve as a physical model for tsunami waves (called simply tsunami below) is examined. Such waves (wavelengths more than 200 m at depths down to 10–20 m) are induced by high-speed ferries sailing at near-critical speeds in semisheltered, relatively shallow areas. It is shown based on experience from Tallinn Bay, Baltic Sea, that for many aspects these waves can model nearshore dynamics and runup of tsunami caused by landslides, including processes of wave refraction, diffraction, and sea-bottom interaction in bays and harbors. Many governing nondimensional parameters (such as the nonlinearity, dispersion, Reynolds and Ursell numbers, surf similarity parameter, breaking parameter, etc.) of the largest ship waves and landslide tsunamis have the same order of magnitude. It is especially important that use of ship waves for wave propagation and runup studies allows their spatial structure to be accounted for adequately. Near-critical ship waves can therefore be used as a natural substitute for tsunami, for study under controlled and safe conditions.     

Copula models for frequency analysis what can be learned from a Bayesian perspective?

Large spring floods in the Québec region exhibit correlated peakflow, duration and volume. Consequently, traditional univariate hydrological frequency analyses must be complemented by multivariate probabilistic assessment to provide a meaningful design flood level as requested in hydrological engineering (based on return period evaluation of a single quantity of interest). In this paper we study 47 years of a peak/volume dataset for the Romaine River with a parametric copula model. The margins are modeled with a normal or gamma distribution and the dependence is depicted through a parametric family of copulas (Arch 12 or Arch 14). Parameter joint inference and model selection are performed under the Bayesian paradigm. This approach enlightens specific features of interest for hydrological engineering: (i) cross correlation between margin parameters are stronger than expected , (ii) marginal distributions cannot be forgotten in the model selection process and (iii) special attention must be addressed to model validation as far as extreme values are of concern.     

Where Can Seismic Anisotropy Be Detected in the Earth’s Mantle? In Boundary Layers...

—During the last 30 years, considerable evidence of seismic anisotropy has accumulated demonstrating that it is present at all scales, but not in all depth ranges. We detail which conditions are necessary to detect large-scale seismic anisotropy. Firstly, minerals must display a strong anisotropy at the microscopic scale, and/or the medium must be finely layered. Secondly, the relative orientations of symmetry axes in the different crystals must not counteract in destroying the intrinsic anisotropy of each mineral, and there must be efficient mechanisms of orientation of minerals and aggregates. Finally, the strain field must be coherent at large scale in order to preserve long wavelength anisotropy. Part of shallow anisotropy can be related to the past strain field (frozen-in anisotropy), however the deep anisotropy is due to the present strain field. All these conditions are fulfilled only in boundary layers of convective mantle.¶We review in this paper, the seismic data sets which provide insight into the location at depth of large-scale anisotropy from the D"-layer up to the lithosphere. In addition to the well-documented seismic anisotropy in the lithosphere and asthenosphere, there is new evidence of seismic anisotropy in the upper (400–660 km) and lower (660–900 km) transition zones and in the D"-layer. Nonetheless the bulk of the lower mantle seems close to isotropy. If we assume the hypothesis that seismic anisotropy is associated with boundary layers in convective systems, these observations strongly suggest that the transition zone is a boundary layer which makes the pasage of matter between the upper and the lower mantle difficult. However, this general statement does not rule out flow circulation between the upper and lower mantles. Finally, the geophysical, mineral physics and geological applications are briefly reviewed. An intercomparison between surface wave anisotropy and body-wave anisotropy data sets is presented. We discuss the scientific potential of seismic anisotropy and how it makes it possible to gain more insight into continental root, deformation and geodynamics processes.     

Can plankton communities be considered as bio-indicators of water quality in the Lagoon of Venice?

This study examines whether plankton of the Lagoon of Venice could be considered as a bio-indicator of areas subjected to various anthropogenic influences. This study was a two year hydrochemical and biological survey in five areas of the Lagoon of Venice, each with different environmental conditions due to pollution from urban, industrial, thermal and agricultural wastes. Phytoplankton associations did not show any promising species. In the different lagoonal areas, this community was differentiated into its major groups. In contrast, the copepod Acartia tonsa Dana could be considered as a target species in highly eutrophic areas.     

Can the tropical storms originated from the Bay of Bengal impact the precipitation and soil moisture over the Tibetan Plateau?

This study investigates the impacts of tropical storms originated from the Bay of Bengal(BOBTSs) on the precipitation and soil moisture over the Tibetan Plateau(TP) in April–June(AMJ) and September–December(SOND) during 1981–2011 based on the best track dataset provided by Joint Typhoon Warning Centre(JTWC). Results indicate that there are about 1.35 BOBTSs influence the TP in each year and most of them occurred in May and October, and the BOBTSs in AMJ influence the TP with larger extension and higher latitudes than those in SOND. The maximum regional precipitation induced by the BOBTSs accounts for more than 50% for the total precipitation in the corresponding month and about 20% for the season. Further analysis reveals that the surface soil moisture anomalies induced by the BOBTSs can persist only 20–25 days in AMJ, and the case is also true for the snow depth in SOND. Numerical simulations by using the regional climate model of Weather Research and Forecasting(WRF) suggest that the soil moisture anomalies in the sub-surface can last 2 months whereas for the surface it can persist only about 20 days, which agrees well with the observation analysis. Overall, the effect of the preceding BOBTSs on the snow depth and soil moisture anomalies over the TP cannot maintain to summer, and there is no robust connection between the BOBTSs and summer precipitation anomalies in East China. Moreover, since the mid-1990 s, the spring rainfall induced by the BOBTSs over the TP seems to be enhanced to a certain degree because of the intensified BOBTSs.     

What can we learn from the projections of changes of flow patterns? Results from Polish case studies

River flow projections for two future time horizons and RCP 8.5 scenario, generated by two projects (CHASE-PL and CHIHE) in the Polish-Norwegian Research Programme, were compared. The projects employed different hydrological models over different spatial domains. The semi-distributed, process-based, SWAT model was used in the CHASE-PL project for the entire Vistula and Odra basins area, whilst the lumped, conceptual, HBV model was used in the CHIHE project for eight Polish catchments, for which the comparison study was made. Climate projections in both studies originated from the common EURO-CORDEX dataset, but they were different, e.g. due to different bias correction approaches. Increases in mean annual and seasonal flows were projected in both studies, yet the magnitudes of changes were largely different, in particular for the lowland catchments in the far future. The HBV-based increases were significantly higher in the latter case than the SWAT-based increases in all seasons except winter. Uncertainty in projections is high and creates a problem for practitioners.     

Suspended sediment delivery from small catchments to the Bay of Biscay. What are the controlling factors?

The transport and yield of suspended sediment (SS) in catchments all over the world have long been topics of great interest. This paper addresses the scarcity of information on SS delivery and its environmental controls in small catchments, especially in the Atlantic region. Five steep catchments in Gipuzkoa (Basque Country) with areas between 56 and 796 km² that drain into the Bay of Biscay were continuously monitored for precipitation, discharge and suspended sediment concentration (SSC) in their outlets from 2006 to 2013. Environmental characteristics such as elevation, slope, land‐use, soil depth and erodibility of the lithology were also calculated. The analysis included consideration of uncertainties in the SSC calibration models in the final suspended sediment yield (SSY) estimations. The total delivery of sediments from the catchments into the Bay of Biscay and its standard deviation was 272 200 ± 38 107 t yr.^?1, or 151 ± 21 t km^?2 yr.^?1, and the SSYs ranged from 46 ± 0.48 to 217 ± 106 t km^?2 yr.^?1. Hydroclimatic variables and catchment areas do not explain the spatial variability found in SSY, whereas land‐use (especially non‐native plantations) and management (human impacts) appear to be the main factors that control this variability. Obtaining long‐term measurements on sediment delivery would allow for the effects of environmental and human induced changes on SS fluxes to be better detected. However, the data provided in this paper offer valuable and quantitative information that will enable decision‐makers to make more informed decisions on land management while considering the effects of the delivery of SS. Copyright © 2016 John Wiley & Sons, Ltd.     

Can origin of the 2400-year cycle of solar activity be caused by solar inertial motion?

A solar activity cycle of about 2400 years has until now been of uncertain origin. Recent results indicate it is caused by solar inertial motion. First we describe the 178.7-year basic cycle of solar motion. The longer cycle, over an 8000 year interval, is found to average 2402.2 years. This corresponds to the Jupiter/Heliocentre/Barycentre alignments (9.8855 × 243). Within each cycle an exceptional segment of 370 years has been found characterized by a looping pattern by a trefoil or quasitrefoil geometry. Solar activity, evidenced by ¹⁴C tree-ring proxies, shows the same pattern. Solar motion is computable in advance, so this provides a basis for future predictive assessments. The next 370-year segment will occur between AD 2240 and 2610.     

New Methodology for Computation of the Earth’s Polarizability from Telluric Borehole Logging Measurements Taken at Different Frequencies

An important approach for computation of the earths polarizability is achieved by developing a novel method with new parameters called Natural Percent Frequency Effect (NPFE) and Natural Metal Factor (NMF) resulting from telluric logging data taken at different frequencies. The essential advantage of the developed approach relies on using natural electrical currents instead of an artificial electrical source usually needed in the standard frequency domain applied in the induced polarization method. Furthermore, a good qualitative correlation has been found between the new parameters and those of the traditional induced polarization method obtained in time and frequency domains. The new method has been tested in well 32 in the Rouez mine in France, where sulphide mineralization is well known to occur.     

Can satellite land surface temperature data be used similarly to river discharge measurements for distributed hydrological model calibration?

Abstract

A new methodology is proposed for the calibration of distributed hydrological models at the basin scale by constraining an internal model variable using satellite data of land surface temperature (LST). The model algorithm solves the system of energy and mass balances in terms of a representative equilibrium temperature that governs the fluxes of energy and mass over the basin domain. This equilibrium surface temperature, which is a critical model state variable, is compared to operational satellite LST, while calibrating soil hydraulic parameters and vegetation variables differently in each pixel, minimizing the errors. This procedure is compared to the traditional calibration using only discharge measurements. The distributed energy water balance model, Flash-flood Event-based Spatially-distributed rainfall–runoff Transformation – Energy Water Balance model (FEST-EWB), is used to test this approach. This methodology is applied to the Upper Yangtze River basin (China) using MODIS LST retrieved from satellite data in the framework of the NRSCC-ESA DRAGON-2 Programme. The calibration procedure based on LST seems to outperform the calibration based on discharge, with lower relative error and higher Nash-Sutcliffe efficiency index on cumulated volume.

Editor D. Koutsoyiannis; Associate editor C. Perrin     

Can the spread of non-native oysters (Crassostrea gigas) at the early stages of population expansion be managed?

The Pacific oyster (Crassostrea gigas) was introduced into Strangford Lough, Northern Ireland in the 1970s. It was assumed that local environmental conditions would not facilitate successful reproduction. However, in the 1990s there were reports of C. gigas outside licensed aquaculture sites and this investigation set out to ascertain the current distribution, years of likely recruitment and population structure of the species. C. gigas were found distributed widely throughout the northern basin during surveys; the frequency distribution suggesting C. gigas is not recruiting every year. Establishment of feral populations of C. gigas elsewhere have linked to habitat change. A pilot cull was initiated to assess the success rate of early intervention. This paper demonstrates the potential benefits of responding rapidly to initial reports of non-native species in a way that may curtail establishment and expansion. The method advocated in simple and can be recommended to the appropriate regulatory authorities.     

Can sodium hypochlorite reduce the risk of species introductions from diapausing invertebrate eggs in non-ballasted ships?

Many transoceanic vessels enter the Great Lakes carrying residual ballast water and sediment that harbours live animals and diapausing eggs. In this study, we examine the potential for sodium hypochlorite (NaOCl) to reduce the risk of species introductions from diapausing invertebrate eggs in residual ballast sediment. We collected sediment from three transoceanic vessels and from Lake Erie and exposed them to NaOCl concentrations between 0 and 10,000 mg/L for 24 h. Hatching success was reduced by >89% in all four experiments at 1,000 mg/L relative to unexposed controls. Fewer species hatched at high than at low NaOCl concentrations. Based on an average residual ballast of 46.8 tonnes, the volume of NaOCl required to treat inbound vessels is 374 L. Impacts of NaOCl use could be minimized by neutralization of treated residuals with sodium bisulfite. Further research is needed, however, to evaluate the effect of NaOCl on ballast tank corrosion.     

Models of the Earth’s crust from controlled-source seismology — Where we stand and where we go?

Controlled-source seismology (CSS) is the primary source of information regarding the fine structure of the lithosphere. The aim of this paper is to provide an overview of the methods that are commonly used to derive Earth models from CSS data with the focus on the wide-angle reflection/refraction method. Some outlook on the future of the CSS is presented with the special emphasis on the full-wavefield based methods like full-waveform inversion, which brings high level of objectivity into modeling, as well as significantly increases spatial resolution. It is stressed that the researchers should be aware of the limitations of how the elastic parameters transcribe into the actual rock properties which should stimulate them to go beyond the simple P-wave modeling and to build multiparameter Earth models based either on the seismic data or constrained by additional geophysical fields in order to derive sound geological interpretation of their models.