Antithetic behaviour of gold in the volcanogenic massive sulphide deposits of the Iberian Pyrite Belt

Detailed mineralogical and geochemical studies of the volcanogenic sulphide mineralization in the Spanish part of the Iberian Pyrite Belt (IPB) define two geochemical, mineralogical and spatial gold associations: (1) the Tharsis-Sotiel-Migollas type in which the gold is enriched with (Co?±?Bi) in the stockworks and interaction zones at the base of the massive sulphide mound; and (2) the Rio Tinto-Aznalcóllar-La Zarza type in which the gold is enriched in facies with a polymetallic (Zn?+?Ag?±?As?±?Tl?±?Hg) signature in a distal position or blocked beneath the massive sulphides. The first type is localized within a domain covering the southern half of the belt which is characterized by an abundance of sedimentary facies. The paragenesis shows that the gold association formed at high temperature (>300?°C) during the initial phases of massive sulphide genesis; the gold, which occurs in patches of very auriferous electrum (Au?>?75?wt.%), was transported by chloride complexes. The second type is found in the northern domain of the belt where volcanic facies are predominant. The paragenesis shows that the gold association formed at lower temperature (<280?°C) late in the massive sulphide genesis. This gold was transported by bisulphide complexes [Au(HS)₂ ^?] and is contained in Ag- and Hg-rich electrum (up to 61.0 and 30.5?wt.% respectively) and/or auriferous arsenopyrite (mean of 280?ppm Au), two mineral expressions that are able to coexist. It would appear that sulphur activity and oxygen fugacity were important factors in controlling the distribution of gold between the two host minerals and also in determining the Ag content of the electrum. This antithetic behaviour of the gold in the IPB reflects differences in the gold mineralizing fluids that may be due to the geologic environment; i.e. either dominantly sedimentary and acting as a mechanical barrier for gold bearing fluids, or dominantly volcanic and more open to seawater circulation. The fact that possible complications can occur during massive sulphide genesis, in response to the source and evolution of the fluids, raises the question of whether one or two gold influxes are involved. For example, the two gold associations could derive from a single gold influx, with remobilization and redistribution of the gold from the early (Co?±?Bi) facies giving rise to the later gold paragenesis of the (Zn?+?Ag?±?As?±?Tl?±?Hg) facies; this would not have occurred or would have been limited at the Tharsis-Sotiel-Migollas type orebodies. Alternatively, the two gold associations could reflect two separate evolutionary processes distinguished by the gold appearing either early or late in the hydrothermal fluids. Knowing the gold association of a massive sulphide deposit is an advantage when exploring for potential host facies.     

A magnetite-rich Cyprus-type VMS deposit in Ortaklar: A unique VMS style in the Tethyan metallogenic belt,Gaziantep, Turkey

The Ortaklar VMS deposit is hosted in the Koçali Complex consisting of basalts and deep sea pelagic sediments, which formed by rifting and continental break-up of the southern Neotethyan in Late Triassic. The basalts are of NMORB-type without notable crustal contamination. From the surface to depth, the Ortaklar deposit consists of a gossan zone, a thick massive ore zone and a poorly developed stockwork zone. Primary mineralisation is characterised by distinctive facies including sulphide breccias (proximal), graded beds (distal), stockworks and chimney fragments. Ore mineral abundances decrease in the order of pyrite, magnetite, chalcopyrite, and sphalerite. Two distinct phases of mineralisation, massive magnetite and massive sulphide, are present in the Ortaklar deposit. Textural evidence (e.g., magnetite replacing sulphides) and the spatial relationships with the host rocks indicate that magnetite and sulphide minerals were generated in different stages. The transition from sulphide to magnetite mineralisation is interpreted to relate to variation in H₂S content of ore fluids. The 1st stage massive sulphide ore might have formed by early hydrothermal fluids rich in Fe and H₂S. The 2nd stage massive magnetite might have formed by later neutral hydrothermal fluids rich in Fe but poor in H₂S, replacing the pre-existing sulphide ore.The alteration patterns, mineral paragenesis, lithological features (massive ore-stockwork ore-gossan) of the Ortaklar deposit together with its trace elements, Cu-Pb-Zn-Au-Ag and REE signatures are all consistent with a Cyprus-type VMS system. The δ³⁴S values in pyrite and chalcopyrite samples range from 2.6 to 5.7‰, indicating that the hydrothermal fluids were associated with sub-seafloor igneous activity, typical of Cyprus-type VMS deposits. However, magnetite formed later than sulphide minerals in the Ortaklar deposit, contrasting with typical Cyprus-type VMS deposits where magnetite generally occurs in lower sections. Consequently, although the Ortaklar deposit generally conforms to Cyprus-type deposits, it is distinguished from them by its late stage and high magnetite concentration. Thus, the Ortaklar deposit is thought to be an exceptional and perhaps unique Cyprus-type VMS deposit.     

The Filon Norte orebody (Tharsis, Iberian Pyrite Belt): a proximal low-temperature shale-hosted massive sulphide in a thin-skinned tectonic belt

The Filón Norte orebody (Tharsis, Iberian Pyrite Belt) is one of the largest pyrite-rich massive sulphide deposits of the world. The present structure of the mineralization consists of an internally complex low-angle north-dipping thrust system of Variscan age. There are three major tectonic units separated by thick fault zones, each unit with its own lithologic and hydrothermal features. They are internally organized in a hinterland dipping duplex sequence with high-angle horses of competent rocks (igneous and detritic rocks and massive sulphides) bounded by phyllonites. The mineralization is within the Lower Unit and is composed of several stacked sheets of massive sulphides and shales hosting a stockwork zone with no obvious zonation. The Intermediate Unit is made up of pervasively ankeritized shales and basalts (spilites). Here, hydrothermal breccias are abundant. The Upper Unit is the less hydrothermally altered one and consists of silicified dacites and a diabase sill. The tectonic reconstruction suggests that the sequence is inverted and the altered igneous rocks were originally below the orebody. Carbon, oxygen and sulphur isotopes in the massive sulphides and hydrothermal rocks as well as the mineral assemblage and the paragenetic succession suggest that the sulphide precipitation in the sea floor took place at a low temperature (<≈150?°C) without indication, at least in the exposed section, of a high-temperature copper-rich event. Sporadic deep subsea-floor boiling is probably responsible for the formation of hydrothermal breccias and the wide extension of the stockwork. Its Co-Au enrichment is interpreted as being related with the superposition of some critical factors, such as the relationship with black shales, the low temperature of formation and the boiling of hydrothermal fluids. The present configuration and thickness of the orebody is due to the tectonic stacking of a thin and extensive blanket (2–4?km²) of massive sulphides with low aspect ratio. They were formed by poorly focused venting of hot modified seawater equilibrated with underlying rocks into the seafloor. Massive sulphide precipitation took place by hydrothermal fluid quenching, bacteriogenic activity and particle settling in an unusual, restricted, euxinic and shallow basin (brine pool?) with a low detritic input but with important hydrothermal activity related to synsedimentary extensional faulting. Resedimentation of sulphides seems to be of major importance and responsible for the observed well-mixed proximal and distal facies. The tectonic deformation is largely heterogeneous and has been mostly channelled along the phyllonitic (tectonized shales) deformation bands. Thus, sedimentary and diagenetic textures are relatively well-preserved outside the deformation bands. In the massive sulphides, superimposed Variscan recrystallization is not very important and only some early textures are replaced by metamorphic/tectonic ones. The stockwork is much more deformed than the massive sulphides. The deformation has a critical effect on the present morphology of the orebody and the distribution of the ore minerals. This deposit is a typical example of the sheet-like, shale-hosted, anoxic, low temperature and Zn-rich massive sulphides developed in a ensialic extensional basin.     

Metavolcanic host rocks,mineralization, and gossans of the Shaib al Tair and Rabathan volcanogenic massive sulphide deposits of the Wadi Bidah Mineral District,Saudi Arabia

The Wadi Bidah Mineral District of Saudi Arabia contains more than 16 small outcropping stratabound volcanogenic Cu–Zn–(Pb) ± Au-bearing massive sulphide deposits and associated zones of hydrothermal alteration. Here, we use major and trace element analyses of massive sulphides, gossans, and hydrothermally altered and least altered metamorphosed host rock (schist) from two of the deposits (Shaib al Tair and Rabathan) to interpret the geochemical and petrological evolution of the host rocks and gossanization of the mineralization. Tectonic interpretations utilize high-field-strength elements, including the rare earth elements (REE), because they are relatively immobile during hydrothermal alteration, low-grade metamorphism, and supergene weathering and therefore are useful in constraining the source, composition, and physicochemical parameters of the primary igneous rocks, the mineralizing hydrothermal fluid and subsequent supergene weathering processes. Positive Eu anomalies in some of the massive sulphide samples are consistent with a high temperature (>250°C) hydrothermal origin, consistent with the Cu contents (up to 2 wt.%) of the massive sulphides. The REE profiles of the gossans are topologically similar to nearby hydrothermally altered felsic schists (light REE (LREE)-enriched to concave-up REE profiles, with or without positive Eu anomalies) suggesting that the REE experienced little fractionation during metamorphism or supergene weathering. Hydrothermally altered rocks (now schists) close to the massive sulphide deposits have high base metals and Ba contents and have concave-up REE patterns, in contrast to the least altered host rocks, consistent with greater mobility of the middle REE compared to the light and heavy REE during hydrothermal alteration. The gossans are interpreted to represent relict massive sulphides that have undergone supergene weathering; ‘chert’ beds within these massive sulphide deposits may be leached wall-rock gossans that experienced silicification and Pb–Ba–Fe enrichment from acidic groundwaters generated during gossan formation.     

Geological constraints on massive sulphide genesis in the Iberian Pyrite Belt

The Iberian Pyrite Belt (IPB), SW Iberian Peninsula, Spain and Portugal, one of the most famous and oldest mining districts in the world, includes several major concentrations of massive sulphides, unique on Earth (e.g., Riotinto, Neves Corvo), as well as a large number of smaller deposits of this same type. All these deposits, in spite of their general similarities, show significant differences in geological setting, age, relations to country rocks, hydrothermal alteration, mineralogy and geochemistry. As a consequence of a review of the available data in the IPB, together with new findings on volcanism, hydrothermal alteration and ore mineralogy, we propose a modified genetic scenario, that can account particularly for the diversity of the geological situations in which sulphide deposits occur, as well as for their mineralogical and petrological diversity. It is concluded that there is no direct genetic relationship between felsic volcanic activity and massive sulphide deposition in the IPB, and that most of the massive sulphide bodies, including all of the giant ones, are closely related to hydrothermal vents, being therefore proximal. The available isotopic data yield additional genetic information: (a) Homogeneous lead isotope values indicate a single (or homogenized) metal source; (b) sea and connate water are the fluid reservoirs for hydrothermal input, and (c) bacterial reduction of sulphur is the most probable cause of differences in δ³⁴S between stockwork and massive sulphide mineralizations. Finally, current geodynamic models suggested for the IPB are discussed. It is suggested that an intracontinental, ensialic rift or pull-apart environment is the most probable genetic environment for the IPB mineralizations.     

Sulphide mineralization and wall-rock alteration in ophiolites and modern oceanic spreading centres

Massive and stockwork Fe-Cu-Zn (Cyprus type) sulphide deposits in the upper parts of ophiolite complexes represent hydrothermal mineralization at ancient accretionary plate boundaries. These deposits are probable metallogenic analogues of the polymetallic sulphide deposits recently discovered along modern oceanic spreading centres. Genetic models for these deposits suggest that mineralization results from large-scale circulation of sea-water through basaltic basement along the tectonically active axis of spreading, a zone of high heat flow. The high geothermal gradient above 1 to 2 km deep magma chambers emplaced below the ridge axis drives the convective circulation cell. Cold oxidizing sea-water penetrating the crust on the ridge flanks becomes heated and evolves into a highly reduced somewhat acidic hydrothermal solvent during interaction with basaltic wall-rock. Depending on the temperature and water/rock ratio, this fluid is capable of leaching and transporting iron, manganese, and base metals; dissolved sea-water sulphate is reduced to sulphide. At the ridge axis, the buoyant hydrothermal fluid rises through permeable wall-rocks, and fluid flow may be focussed along deep-seated fractures related to extensional tectonic processes. Metal sulphides are precipitated along channelways as the ascending fluid undergoes adiabatic expansion and then further cooling during mixing with ambient sub-sea-floor water. Vigorous fluid flow results in venting of reduced fluid at the sea-floor/sea-water interface and deposition of massive sulphide. A comparison of sulphide mineralization and wall-rock alteration in ancient and modern spreading centre environments supports this genetic concept.Massive sulphide deposits in ophiolites generally occur in clusters of closely spaced (< 1–5 km) deposits. Individual deposits are a composite of syngenetic massive sulphide and underlying epigenetic stockwork-vein mineralization. The massive sulphide occurs as concordant tabular, lenticular, or saucer-shaped bodies in pillow lavas and pillow-lava breccia; massive lava flows, hyalcoclastite, tuff, and bedded radolarian chert are less commonly associated rock types. These massive sulphide zones are as much as 700 m long, 200 m wide, and 50 m thick. The pipe-, funnel-, or keel-shaped stockwork zone may extend to a dehpth of 1 km in the sheeted-dike complex. Several deposits in Cyprus are confined to grabens or the hanging wall of premineralization normal faults.Polymetallic massive sulphide deposits and active hydrothermal vents at medium- to fast-rate spreading centres (the East Pacific Rise at lat. 21°N, the Galapagos Spreading Centre at long. 86°W, the Juan de Fuca Ridge at lat. 45°N., and the Southern Trough of Guaymas Basin, Gulf of California) have interdeposit spacings on a scale of tens or hundreds of metres, and are spatially associated with structural ridges or grabens within the narrow (< 5 km) axial valleys of the rift zones. Although the most common substrate for massive sulphide accumulations is stacked sequences of pillow basalt and sheet flows, the sea-floor underlying numerous deposits in Guaymas Basin consists of diatomaceous ooze and terrigenous clastic sediment that is intruded by diabase sills. Mound-like massive sulphide deposits, as much as 30 m wide and 5m high, occur over actively discharging vents on the East Pacific Rise, and many of these deposits serve as the base for narrow chimneys and spires of equal or greater height. Sulphides on the Juan de Fuca Ridge appear to form more widespread blanket deposits in the shallow axial-valley depression. The largest deposit found to date, along the axial ridge of the Galapagos Spreading Centre, has a tabular form and a length of 1000 m, a width of 200 m, and a height of 30 m.The sulphide assemblage in both massive and vein mineralization in Cyprus type deposits is characteristically simple: abundant pyrite or, less commonly, pyrrhotite accompanied by minor marcasite, chalcopyrite, and sphalerite. With few exceptions, the composition of massive sulphide ranges from 0.3 to 5 wt. % Cu, from 0.1 to 3 wt. % Zn, from 0.5 to 30 ppm Au, and from 1 to 50 ppm Ag. The only common gangue minerals — quartz, chlorite, calcite, and gypsum generally make up less than 10 percent of the massive zone.Sulphide assemblages in massive sulphide samples recovered from the Juan de Fuca Ridge (abundant sphalerite, wurtzite, and pyrite; minor marcasite, chalcopyrite, and galena), East Pacific Rise (abundant sphalerite, pyrite, and chalcopyrite; minor wurtzite, marcasite, and pyrrhotite), and Guaymas Basin (abundant pyrrhotite and sphalerite; minor chalcopyrite) contrast with ophiolitic deposits. Bulk analyses of two zinc-rich sulphide samples from the Juan de Fuca Ridge yield the following average values: Zn, 56.6 wt. %; Cu, 0.2 wt. %; Pb, 0.15 wt. %; Fe, 4.9 wt. %; Ag, 260 ppm; and Cd, 775 ppm. Other minerals precipitated with sulphides at hydrothermal-vent sites include anhydrite, barite, gypsum, Mg-hydroxysulphate-hydrate, talc, sulphur, and amorphous silica.Massive sulphide lenses in some Cyprus-type deposits are underlain by a silica-rich zone consisting of massive quartz, opaline silica, red jasper, or chert mixed with disseminated and veinlet Fe-Cu-Zn sulphides. Some deposits are overlain by ochre, a gossanous Mn-poor Fe-rich bedded deposit composed of goethite, maghemite, quartz, and finely disseminated sulphide. In the Solomon Islands, ochre is overlain by siliceous sinter containing anhydrite, barite, and sulphide; the sinter contains anomalous Ag, Au, Cu, Zn, and Hg, and grades upward into Fe-rich chert and manganiferous wad. Amorphous Fe-Mn deposits (umber) and Mn-bearing chert enriched in Ba, Co, Cu, Ni, Cr, Pb, and Zn are common features near the top of ophiolite sequences. Although their genetic relation to sulphide mineralization is uncertian, they probably formed during off-axis hydrothermal discharge.At modern, medium-rate spreading centres, thin blankets of unconsolidated hydrothermal sediment have been observed near hydrothermal sulphide deposits. Basalt fragments recovered with massive sulphide from the Juan de Fuca Ridge have surfaces coated with smectite, magnetite, hematite, opaline silica, and Fe---Mn-oxyhydroxides. Sediment mounds composed largely of nontronitic clay and hydrated Fe and Mn oxides, and more distal metalliferous (Fe, Mn, Cu, Ni, Pb, Zn) sediment on the flanks of ceanridges, are also products of off-axis hydrothermal processes.Pillow lavas, diabase dikes, and gabbro in ophiolite sequences, and deeper, layer 2 basalt and diabase recovered from oceanic ridges, are altered to greenschist-facies assemblages (albite + chlorite + actinolite ± sphene ± quartz ± pyrite) during high-temperature sub-sea-floor hydro-thermal metamorphism near the axis of spreading. Chemical changes in the wall-rock during this large-scale sea-water/rock interactive episode depend on the water/rock ratio and temperature but generally include gains in Mg, Na and H₂O and losses of Ca. Subsequent low temperature sea-water/rock interaction away from the axis of spreading results in fracture-controlled zeolitefacies alteration, characterized by smectite, caledonite, zeolite, calcite, prehnite, hematite, marcasite, and pyrite. This retrograde alteration involves increases in total Fe, K, and H₂O and decreases in Mg and Si in the wallrock; Ca may be lost or gained.Wall-rock alteration in Cyprus type stockwork zones is more striking, in that the basalt and diabase between veins of Fe---Cu-Zn sulphides, quartz, and chlorite have undergone partial to complete conversion to fine-grained aggregates of quartz + chlorite + illite + pyrite; kaolinite and palygorskite may be present in minor amounts. Calcium and Na are strongly depleted; K, Al, Ti, Mn, and Ni are leached to a lesser extent; and Fe, S, Cu, Zn, and Co are strongly enriched in the wall-rock underlying massive sulphide. Mafic rocks at depth in the volcanic pile may be enriched in K, Rb, and Li, and depleted in Cu, Co, and Zn. Lavas lateral to and overlying massive sulphide mineralization may have low concentrations of Cu and high concentrations of Zn and Co relative to background levels.Mutual consideration of hydrothermal sulphide deposits and associated wall-rock alteration in ophiolites and at modern oceanic spreading centres can provide useful criteria for the development of regional exploration models for ophiolitic terrains.     

Lead isotope systematics of the giant massive sulphide deposits in the Iberian Pyrite Belt

Lead isotope analyses were performed on 26 polymetallic massive sulphide deposits of the Iberian Pyrite Belt, as well as on overlying gossans and associated volcanic rocks. All the massive sulphide deposits (except for Neves-Corvo), and nearly all the volcanic rocks show very similar isotopic compositions grouped around 18.183 (²⁰⁶Pb/²⁰⁴Pb), 15.622 (²⁰⁷Pb/²⁰⁴Pb) and 38.191 (²⁰⁸Pb/²⁰⁴Pb), indicating that most of the ore deposit lead was derived from the same continental crust environment as the associated volcanic rocks. The isotopic compositions are representative of the average south Iberian crust during the Devonian to Early Carboniferous (Dinantian), and their constancy implies a homogenization of the mineralizing fluids before the deposition of the massive sulphides from hydrothermal fluids circulating through interconnected regional fracture systems. This isotopic constancy is incompatible with multiple, small, independent hydrothermal cells of the East Pacific Rise type, and fits much better with a model of hydrothermal convections driven by “magmatic floor heating”. Neves-Corvo is the only south Iberian massive sulphide deposit to have a heterogeneous isotopic composition with, in particular, a highly radiogenic stanniferous ore (²⁰⁶Pb/²⁰⁴Pb of the cassiterite is >18.40). A model of lead mixing with three components is proposed to explain these variations: (1) one derived from the Devonian to Early Carboniferous (Dinantian) continental crust that generated all the other massive ores; (2) an Eohercynian stanniferous mineralization partly remobilized during the formation of the massive sulphides, but independent of them; and (3) a Precambrian continental crust component. The juxtaposition of three different sources places Neves-Corvo in a specific paleogeographic situation that could also explain its mineralogical specificity. The geodynamic context that best explains all the obtained isotopic results is one of an accretionary prism. The fact that lead isotope signatures of the gossans are almost identical to those of the underlying massive sulphides means that this technique could be a useful exploration tool for the Iberian Pyrite Belt.     

Sediment geochemistry and base metal sulphide mineralisation in the Quidong area,Southeastern New South Wales,Australia

Geochemically anomalous, pyritic sediments occur directly above a Mid Silurian unconformity in the Quidong area of southeastern New South Wales. The composition of these sediments reflects derivation from a mixture of: (a) feldspar- and mica-depleted detritus reworked from underlying quartz-rich flysch; (b) Mg-rich clay or chlorite precipitated from hydrothermal exhalations; and (c) pyrite formed by reaction of iron in clays or oxides with reduced sulphur derived largely from sea-water sulphate and possibly a magmatic source. Three types of base metal sulphide mineralisation occur at Quidong including: (a) weak syngenetic concentrations in the pyritic sediments; (b) stratabound and fault-controlled bodies of massive sulphides hosted by the pyritic sediments and containing higher grade Pb, Zn and Cu; and (c) small vein and cavity fillings of galena, barite and other minor sulphides in overlying limestones. All types of mineralisation are related to hydrothermal activity which occurred during and after deposition of the pyritic facies. The geochemistry of the immediately underlying basement rocks and Pb isotope data indicate that the source of the metal-bearing fluids was deeper in the crust and probably related to widespread partial melting and magmatic processes. The sulphidic sediments and stratabound sulphide deposits represent syngenetic-epigenetic, sediment hosted mineralisation developed in a shallow marine environment, distal from major volcanic centers. This style of mineralisation has not previously been described from the region. It has some similarities to the Irish-Alpine type spectrum of deposits best known in Europe.     

Geological and Geochemical Investigation of Three Ophiolite‐Hosted Manganese Prospects,Southeast of Birjand,South Khorasan,East of Iran

The studied ophiolite‐hosted manganese prospects are located in southeast of Birjand, South Khorasan, in the east of Iran. The manganese ores within the ophiolitic sequence in this region occur as small discrete patches, associated with radiolarian chert and shale. Manganese ores in the host rocks are recognizable as three distinct syngenetic, diagenetic, and epigenetic features. The syngenetic manganese ores occurred as bands associated with light‐red radiolarian chert. The diagenetic Mn ores occurred as lenses accompanied by dark‐red to brown radiolarian chert. The epigenetic Mn ores occurred as veins/veinlets within the green radiolarian shale. The major manganese ore minerals are pyrolusite, braunite, bixbyite, ramsdellite, and romanechite showing replacement, colloidal, and brecciated textures. The high mean values of Mn/Fe (15.32) and Si/Al (15.65), and the low mean concentration values of trace elements, such as Cu (85.9 ppm), Ni (249.9 ppm), and Zn (149 ppm), as well as the high concentration values of Si, Fe, Mn, Ba, Zn, Sr, and As in the studied manganese ores furnished sufficient evidence to postulate that the sea‐floor Mn‐rich hydrothermal exhalatives were chiefly responsible for the ore formation, and the hydrogenous processes had negligible role in generation of the ores. The further geological and geochemical evidence also revealed that the ores deposited on the upper parts of the ophiolitic sequence by submarine exhalatives. The intense hydrothermal activities caused leaching of elements such as Mn, Fe, Si, Ba, As and Sr from the basaltic lavas (spilites). After debouching of the sea‐floor exhalatives, these elements entered the sedimentary basin. The redox conditions were responsible for separation of Fe from Mn.     

The Iberian type of volcano-sedimentary massive sulphide deposits

The Iberian Pyrite Belt, located in the SW Iberian Peninsula, contains many Paleozoic giant and supergiant massive sulphide deposits, including the largest individual massive sulphide bodies on Earth. Total ore reserves exceed 1500 Mt, distributed in eight supergiant deposits (>100 Mt) and a number of other smaller deposits, commonly with associated stockwork mineralizations and footwall alteration haloes. Massive sulphide bodies largely consist of pyrite, with subordinated sphalerite, galena and chalcopyrite and many other minor phases, although substantial differences occur between individual deposits, both in mineral abundance and spatial distribution. These deposits are considered to be volcanogenic, roughly similar to volcanic-hosted massive sulphides (VHMS). However, our major conclusion is that the Iberian type of massive sulphides must be considered as a VHMS sub-type transitional to SHMS. This work is an assessment of the geological, geochemical and metallogenic data available up to date, including a number of new results. The following points are stressed; (a) ore deposits are located in three main geological sectors, with the southern one containing most of the giant and supergiant orebodies, whereas the northern one has mainly small to intermediate-sized deposits; (b) ore deposits differ one from another both in textures and mineral composition; (c) Co and Bi minerals are typical, especially in stockwork zones; (d) colloidal and other primary depositional textures are common in many localities; (e) a close relation has been found between ore deposits and some characteristic sedimentary horizons, such as black shales. In contrast, relationships between massive sulphides and cherts or jaspers remains unclear; (f) footwall hydrothermal alterations show a rough zoning, the inner alteration haloes being characterized in places by a high Co/Ni ratio, as well as by mobility of Zr, Y and REE; (g) ¹⁸O and D values indicate that fluids consist of modified seawater, whereas ³⁴S data strongly suggest the participation of bacterial-reduced sulphur, at least during some stages of the massive sulphide genesis, and (h) lead isotopes suggest a single (or homogeneized) metal source, from both the volcanic piles and the underlying Devonian rocks (PQ Group). It is concluded that, although all these features can be compatible with classical VHMS interpretations, it is necessary to sketch a different model to account for the IPB characteristics. A new proposal is presented, based on an alternative association between massive sulphide deposits and volcanism. We consider that most of the IPB massive orebodies, in particular the giant and supergiant ones, were formed during pauses in volcanic activity, when hydrothermal activity was triggered by the ascent and emplacement of late basic magmas. In these conditions, deposits formed which had magmatic activity as the heat source; however, the depositional environment was not strictly volcanogenic, and many evolutionary stages could have occurred in conditions similar to those in sediment-hosted massive sulphides (SHMS). In addition, the greater thickness of the rock pile affected by hydrothermal circulation would account for the enormous size of many of the deposits. Received: 8 September 1998 / Accepted: 4 January 1999     

Ferruginous and manganiferous haloes around massive sulphide deposits of the Urals

Proximal brecciform ferruginous and manganiferous rocks related to VMS deposits of the Urals are subdivided into jasperites, gossanites, and umbers, in addition to thin-bedded jaspers and cherts. The coherence of host rock composition and Mn–Fe-fertility of the sediments have been established. Fe-poor pink hematitic and gray sulphidic chert are typical of the felsic class of VMS deposits. In contrast the contents of Fe vary from high to moderate in ferruginous rocks enclosed in basaltic units associate with VMS deposits. Fe- and Mn-rich ferruginous rocks and umbers occur in association with limestones and calcareous sedimentary rocks in both types of volcanic sequences. A common feature of jasperites and umbers is the abundance of replacement textures of hyaloclastites and carbonates by hematite and silica. In addition, replacement of clastic sulphides by hematite and magnetite is a characteristic genetic feature of gossanites. All of these sedimentary rocks are accompanied by pseudomorphs of hematite and quartz formed after bacterial filaments. The abundance of replacement textures are supportive of the halmyrolysis model, in addition to hydrothermal sedimentary and sub-seafloor hydrothermal replacement theories. Study of chemical zonation of altered hyaloclasts shows depletion of their rims, not only in mobile Na, K, Mg, but also in immobile Al, Ti, and REE; whereas Si and Fe are concentrated in situ. The halmyrolysis model presented here, involving organic-rich calcareous hyaloclastic sediments, resolves the problem of subtraction of Al, Ti, REE and other elements, which are commonly immobile under hydrothermal conditions. The evolution of the halmyrolysis process from acidic reducing to alkaline oxidized conditions infers a possible range in transformation from Fe^II–Mg smectites to Fe-silicates and Fe-Si oxides as precursors of brecciform jasperite and thin-bedded jasper. The higher acidic, initial stage, of gossanite formation seems to be required for oxidation of organic matter and/or pyrite. The acidic condition facilitates the temporal preservation of “immobile” elements (Al, Ti, REE) in “immature”chlorite–hematite gossanites. Another peculiarity of the gossanite-forming processes is the likely sorption of P, U and V by iron hydroxides displacing sulphides. The general evolution of all ferruginous sediments results in complete Fe²⁺ oxidation and silicification accompanied by subtraction of other elements. The vertical diagenetic differentiation leads to concentration of Mn-carbonates, silicates and oxyhydroxides into the tops of jasperite and gossanite layers. Mn oxyhydroxides scavenge positively charged hydrated cations like Co and Ni. Near-vent bacterial communities may activate the processes of volcanic glass and sulphide degradation. The proposed processes of halmyrolysis followed by silicification, in situ, may resolve the enigma of silica-rich sediment formation in a silica undersaturated ocean. The discrimination between gossanite and jasperite is useful for elaboration of new criteria for local exploration of VMS- and Mn-deposits. Halo dispersion of gossanites covering an area about two to three times that of the massive sulphide deposit is a good vector for ore body discovery. Proximal gossanites can be differentiated from jasperites by presence of relic sulphide clasts or elevated contents of chalcophile elements (Cu, Fe, Zn, Pb, Bi, Te, As, Sb, Ba), noble metals (Au, Ag) and distinct REE patterns with La and Eu positive anomalies. The development of halmyrolysis and biomineralization models merit further elaboration and testing in on-going research, in order to add or revise theories of iron and manganese deposit formation.     

Mineralogy,microchemistry and fluid inclusion studies of the Besshi-type Nudeh Cu-Zn VMS deposit,Iran

The southwestern Sabzevar basin is the north of Central Iranian Microcontinent hosts abundant mineral deposits, including exhalative Mn mineralization and Cu-Zn volcanogenic massive sulfide (VMS) deposits. Amongst them, the Nudeh Besshi-type Cu–Zn volcanogenic massive sulfide (VMS) deposit is hosted within the lower part of a Late Cretaceous volcano-sedimentary sequence composed of alkali olivine basalt flows and tuffaceous silty sandstone. Based on investigations into the ore geometry, mineralogy, and texture, we recognized three different ore facies: (1) a stockwork of sulfide-bearing quartz veins cutting across the footwall volcano-sedimentary rocks and representing the stringer zone; (2) a massive ore type, displaying replacement texture with pyrite, chalcopyrite, sphalerite, friedrichite, and minor magnetite; and (3) a bedded ore type, with laminated to disseminated pyrite and chalcopyrite. EPMA studies indicate a distinctive minor element distribution between the different ore types of the Nudeh deposit. The Fe content in the sphalerite ranges from 0.65–1.80?wt.%, indicating the Fe-poor nature of the sphalerite. However, the Cd content in sphalerite ranged between 0.164–0.278?wt.%. According to the mineral compositions, Zn, Se, and Ag are found in bornite as minor elements. In the bedded ore facies, the pyrite contains higher levels of Se (up to 0.35?wt.%). The Zn content in the friedrichite in all of the ore samples is low. The Co/Ni ratios in pyrite from the Nudeh ore are lower than those of most magmatic deposits, but are similar to those from volcanogenic deposits, and hence support the proposed hydrothermal origin of the deposit. Two generations of quartz, Q1 and Q2 in the stockwork veins, contain primary fluid inclusions and these contain two phases (liquid and vapor). The lack of vapor-rich inclusions or variable liquid/vapor ratios indicate that the fluids did not boil at the site of trapping. Salinity for both Q1 and Q2 fluid inclusions ranges between 2.2–6.8?wt.% eq. NaCl. Homogenization temperatures for inclusions in the Q1 and Q2 veins average at about 296?°C and are similar to the temperatures of hydrothermal fluids discharged through vents in many modern seafloor VMS deposit. The Nudeh Besshi-type VMS deposit appears to have formed on the seafloor and based on the salinity and temperature constraints from the underlying stockwork, a buoyancy plume model is proposed as a mechanism for precipitation.     

Bismuth and cobalt minerals as indicators of stringer zones to massive sulphide deposits, Iberian Pyrite Belt

The stringer zones and commonly the interaction zone at the base of the massive sulphide mounds in the Iberian Pyrite Belt contain bismuth and cobalt minerals that are not found in the overlying massive sulphides. These are fairly rare cobalt sulphoarsenides (cobaltite, alloclasite, galucodot) that were formed at the beginning of the massive sulphide genesis, and fairly common bismuth sulphides (bismuthinite, hammarite, wittichenite, cosalite, kobellite, joseite, etc.), including species rare at world scale (nuffieldite, giessenite, jaskolskiite) that were deposited from last stage high-temperature (> 300 °C) copper-bearing fluids containing Bi (Te, Se). The last stage fluids precipitated chalcopyrite containing Cu, Bi, Te, (Se) sulphosalts at the base of the sulphide mound to form a high cupriferous zone. Their interaction with the massive sulphides is reflected by the formation of an exchange zone, a few metres thick, showing chalcopyrite disease textures, at the base of the mound; this zone forms the upper limit of potentially economic copper enrichment and of bismuth minerals. Gold is undoubtedly in part, if not totally, related to this last phase. The bismuth concentrations being equivalent in the massive sulphides and the stringers, the presence of bismuth minerals in the stringer zones results from high-temperature conditions combined with a rarity of galena, which impedes absorption of available Bi. The distribution of these bismuth minerals provides a basic mineralogical zoning in the stringer zone, with a deep, low-aS₂ zone containing native bismuth and tellurides and a shallow, higher-aS₂ zone in contact with the massive ore sensu stricto and containing complex bismuth sulphides. These results make it possible to distinguish between sulphide veinlets belonging to stockwork zones of massive orebodies and veinlets of an ambiguous nature, and provide mineralogical criteria for the proximity of copper-rich zones. They enrich the very complex mineralogy of the Iberian Pyrite Belt.     

The origin of skarn beds, Ryllshyttan Zn�CPb�CAg + magnetite deposit, Bergslagen, Sweden

Thin- to medium-bedded, stratiform calc-silicate deposits (banded skarns) are a peculiar, but important, component of the supracrustal successions in the Palaeoproterozoic Bergslagen mining district of central Sweden. They are referred to as ??skarn-banded leptites?? in the literature and are common in areas and at stratigraphic levels that contain iron oxide and base metal sulphide deposits. The stratigraphic hanging wall of the stratabound Ryllshyttan Zn?CPb?CAg + magnetite deposit at Garpenberg, contains approximately 100?C150?m of interbedded aluminous skarn beds and rhyolitic ash-siltstones. The skarn beds are mineralogically variable and dominantly composed of grandite, spessartine, epidote, actinolite, quartz, clinopyroxene, and locally magnetite. Integrated field-mapping, and whole-rock lithogeochemical, microscopic and mineral chemical analyses suggest that the stratiform skarn beds are the products of at least two discrete hydrothermal events and subsequent metamorphism. The first event comprised accumulation in a quiescent subaqueous environment, below wave base, of calcareous and ferruginous sediments rich in Fe, Mn, Ca, and Mg. These chemical sediments were deposited concurrently with rhyolitic ash-silt sedimentation, thus forming a (now metamorphosed) laminated calcareous Fe formation with both a detrital rhyolitic component and rhyolitic siltstone interbeds. Positive Eu-anomalies and negative Ce-anomalies for normalized rare earth element analyses of skarn beds suggest that the iron may have been derived from exhalation of hot and reduced hydrothermal fluids, which upon mixing with more oxidized seawater, precipitated Fe oxides and/or carbonates that settled from suspension to the seafloor. The size of the positive Eu-anomalies of the chemical sediments are modified by the content of rhyolitic volcaniclastic material, which has a negative Eu anomaly, such that positive Eu-anomalies are only observed in skarn beds that possess a minor volcaniclastic component. Subsequently, the calcareous Fe formations were subjected to post-depositional alteration by hydrothermal fluids, locally yielding more manganoan and magnesian assemblages. The Mn-alteration is manifested by lateral gradations from epidote-grandite-clinopyroxene±magnetite rocks into significantly more Mn-rich quartz-spessartine rocks and massive andradite rocks over distances of less than 10?cm within individual skarn beds. Magnesian alteration is manifested by the development of discordant zones of pargasite para-amphibolites and formation of stratiform pargasite rocks texturally similar to the interlaminated grandite-epidote-ferroan diopside rocks. The latter increase in abundance towards the Ryllshyttan deposit and are associated with pre-metamorphic/pre-tectonic K?CMg?CFe±Si alteration (now biotite-phlogopite-garnet-cordierite-pargasite rocks) that is related to base metal mineralization. The zone of Mn- and Mg-altered skarn beds extends beyond the zone of pervasive K?CMg?CFe±Si alteration around Ryllshyttan. This suggests that the skarn bed progenitors, or their sedimentary contacts against rhyolitic ash-siltstones, acted as conduits to outflowing hydrothermal fluids. The chemical and mineralogical imprint, imposed on affected beds by alteration, may serve as indicators of proximity to intense K?CMg?CFe±Si alteration envelopes around other base metal sulphide deposits in Bergslagen. The last recorded event comprised syn-tectonic veining of competent massive andradite skarn beds. The veins contain quartz-albite-epidote-ferroan diopside-actinolite assemblages.     

Geology and genesis of the Aznalcóllar massive sulphide deposits, Iberian Pyrite Belt, Spain

The Aznalcóllar mining district is located on the eastern edge of the Iberian Pyrite Belt (IPB) containing complex geologic features that may help to understand the geology and metallogeny of the whole IPB. The district includes several ore deposits with total reserves of up to 130 Mt of massive sulphides. Average grades are approximately 3.6% Zn, 2% Pb, 0.4% Cu and 65?ppm Ag. Mined Cu-rich stockwork mineralizations consist of 30?Mt with an average grade of 0.6% Cu. Outcropping lithologies in the Aznalcóllar district include detrital and volcanic rocks of the three main stratigraphic units identified in the IPB: Phyllite-Quartzite Group (PQ), Volcano-Sedimentary Complex (VSC) and Culm Group. Two sequences can be distinguished within the VSC. The Southern sequence (SS) is mainly detritic and includes unusual features, such as basaltic pillow-lavas and shallow-water limestone levels, the latter located in its uppermost part. In contrast, the Aznalcóllar-Los Frailes sequence (AFS) contains abundant volcanics, related to the two main felsic volcanic episodies in the IPB. These distinct stratigraphic features each show a different palaegeographic evolution during Upper Devonian and Lower Carboniferous. Massive sulphides occur in association with black shales overlying the first felsic volcanic package (V_A1) Palynomorph data obtained from this black shale horizon indicate a Strunian age for massive sulphides, and consequently an Upper Devonian age for the V_A1 cycle. Field and textural relationships of volcanics suggest an evolution from a subaerial pyroclastic environment (V_A1) to hydroclastic subvolcanic conditions for the V_A2. This evolution can be related to compartmentalizing and increasing depth of the sedimentary basin, which may also be inferred from changes in the associated sediments, including black shales and massive sulphides. Despite changes in the character of volcanism, the same dacitic to rhyolitic composition is found in both pyroclastic and subvolcanic igneous series. The main igneous process controlling chemical variation of volcanics is fractional crystallization of plagioclase (+accessories). This process took place in shallow, sub-surface reservoirs giving rise to a compositional range of rocks that covers the total variation range of felsic rocks in the IPB. The Hercynian orogeny produced a complex structural evolution with a major, ductile deformation phase (F₁), and development of folds that evolved to thrusts by short flank lamination. These thrusts caused tectonic repetition of massive and stockwork orebodies. In Aznalcóllar, some of the stockwork mineralization overthrusts massive sulphides. These structures are cut by large brittle overthrusts and by late wrench faults. The original geometric features of massive sulphide deposits correspond to large blankets with very variable thicknesses (10 to 100?m), systematically associated with stockworks. Footwall rock alteration exhibits a zonation, with an inner chloritic zone and a peripheral sericitic zone. Silicification, sulphidization and carbonatization processes also occur. Hydrothermal alteration is considered a multi-stage process, geochemically characterized by Fe, Mg and Co enrichment and intense leaching of alkalies and Ca. REE, Zr, Y and Hf are also mobilized in the inner chloritic zones. Three ore types occur, both in stockworks and massive sulphides, named pyritic, polymetallic and Cu-pyritic. Of these, Cu-pyritic is more common in stockworks, whereas polymetallic is prevalent in massive sulphides. Zoning of sulphide masses roughly sketches a typical VHMS pattern, but many alternating polymetallic and barren pyritic zones are probably related to tectonics. Although the paragenesis is complex, several successive mineral associations can be distinguished, namely: framboidal pyritic, high-temperature pyritic (300?°C), colloform pyritic, polymetallic and a late, Cu-rich high-temperature association (350?°C). Fluid inclusion data suggest that hydrothermal fluids changed continuously in temperature and salinity, both in time and space. Highest Th and salinities correspond to inner stockworks zones and later fluids. Statistic population analysis of fluid inclusion data points to three stages of hydrothermal activity, at low (<200?°C), intermediate (200–300?°C) and high temperatures (300–400?°C). ³⁴S values in massive sulphides are lower than in stockwork mineralization suggesting a moderate bacterial activity, favoured by the euxinoid environment prevailing during black shale deposition. The intimate relation between massive sulphides and black shales points to an origin of massive sulphides by precipitation and replacement within black shale sediments. These would have acted both as physical and chemical barriers during sulphide deposition. Hydrothermal activity started during black shale deposition, triggered by a rise in thermal gradient due to the ascent of basic magmas. We suggest a three-stage genetic model: (1) low temperature, diffuse fluid flow, producing pyrite-bearing lenses and disseminations interbedded with black shales; locally, channelized high-T fluid flow occurs; (2) hydrothermal cyclic activity at a low to intermediate temperature, producing most of the pyritic and polymetallic ores, and (3) a late high-temperature phase, yielding Cu-rich and Bi-bearing mineralization, mainly in the stockwork zone.     

Constraints on the source of Cu in a submarine magmatic-hydrothermal system,Brothers volcano,Kermadec island arc

Most magmatic-hydrothermal Cu deposits are genetically linked to arc magmas. However, most continental or oceanic arc magmas are barren, and hence new methods have to be developed to distinguish between barren and mineralised arc systems. Source composition, melting conditions, the timing of S saturation and an initial chalcophile element-enrichment represent important parameters that control the potential of a subduction setting to host an economically valuable deposit. Brothers volcano in the Kermadec island arc is one of the best-studied examples of arc-related submarine magmatic-hydrothermal activity. This study, for the first time, compares the chemical and mineralogical composition of the Brothers seafloor massive sulphides and the associated dacitic to rhyolitic lavas that host the hydrothermal system. Incompatible trace element ratios, such as La/Sm and Ce/Pb, indicate that the basaltic melts from L’Esperance volcano may represent a parental analogue to the more evolved Brothers lavas. Copper-rich magmatic sulphides (Cu?>?2 wt%) identified in fresh volcanic glass and phenocryst phases, such as clinopyroxene, plagioclase and Fe–Ti oxide suggest that the surrounding lavas that host the Brothers hydrothermal system represent a potential Cu source for the sulphide ores at the seafloor. Thermodynamic calculations reveal that the Brothers melts reached volatile saturation during their evolution. Melt inclusion data and the occurrence of sulphides along vesicle margins indicate that an exsolving volatile phase extracted Cu from the silicate melt and probably contributed it to the overlying hydrothermal system. Hence, the formation of the Cu-rich seafloor massive sulphides (up to 35.6 wt%) is probably due to the contribution of Cu from a bimodal source including wall rock leaching and magmatic degassing, in a mineralisation style that is hybrid between Cyprus-type volcanic-hosted massive sulphide and subaerial epithermal–porphyry deposits.     

Sulphur source and genesis of polymetallic sulphide occurrences of the Ofoten district in the Central–North Norwegian Caledonides: evidence from sulphur isotopic studies

Fourteen stratiform, stratabound and vein-type sulphide occurrences in the Upper Allochthon of the Central–North Norwegian Caledonides have been studied for their sulphur, oxygen and hydrogen isotope composition. Depositional ages of host rocks to the stratabound and stratiform sulphide occurrences range from 590 to 640?Ma. The sulphides and their host rocks have been affected by polyphase deformation and metamorphism with a peak temperature of 650?°C dated to 432?Ma. A total of 104 sulphide and 2 barite samples were analysed for δ³⁴S, 16 whole-rock and quartz samples for δ¹⁸O and 12 samples of muscovite for δD. The overall δ³⁴S values range from ?14 to +31‰ with the majority of sampled sulphides lying within a range of +4 to +15‰. In most cases δ³⁴S within each hand specimen behaves in accordance with the equilibrium fractionation sequence, δ³⁴S_gn<δ³⁴S_cp<δ³⁴S_sph<δ³⁴S_py. A systematic increase in δ³⁴S from the vein sulphides (?8‰) through schist/amphibolite-hosted (+6‰) and schist-hosted (+7 to +12‰) to dolomite-hosted (+12 to +31‰) occurrences is documented. The δ³⁴S averages of the stratiform schist-hosted sulphides are 17 to 22‰ lower than in the penecontemporaneous seawater sulphate. The Bjørkåsen (+4 to +6‰) occurrence is a volcanogenic massive sulphide (VMS) transitional to sedimentary massive sulphide (SMS), exhalative, massive, pyritic deposit of Cu–Zn–Pb sulphides formed by fluids which obtained H₂S via high-temperature reduction of seawater sulphate by oxidation of Fe²⁺ during the convective circulation of seawater through underlying rock sequences. The Raudvatn, volcanic-hosted, disseminated Cu sulphides (+6 to +8‰) obtained sulphur via a similar process. The Balsnes, stratiform, ‘black schist’-hosted, pyrite–pyrrhotite occurrence (?6 to ?14‰) is represented by typical diagenetic sulphides precipitated via bacteriogenic reduction of coeval (ca. 600?Ma) seawater sulphate (+25 to +35‰) in a system open to sulphate supply. The δ³⁴S values of the Djupvik–Skårnesdalen (+7 to +12‰), Hammerfjell (+5 to 11‰), Kaldådalen (+10 to +12‰) and Njallavarre (+7 to +8‰) stratiform, schist-hosted, massive and disseminated Zn–Pb (±Cu) sulphide occurrences, as well as the stratabound, quartzite-hosted, Au-bearing arsenopyrite occurrence at Langvatnet (+7 to +11‰), suggest that thermochemically reduced connate seawater sulphate was a principal sulphur source. The Sinklien and Tårstad, stratabound, dolomite- and dolomite collapse breccia-hosted, Zn (±Cu–Pb) sulphides are marked by the highest enrichment in ³⁴S (+20 to +31‰). The occurrences ?are?assigned to the Mississippi-Valley-type deposits.?High δ³⁴S values require reduction/replacement of contemporaneous (ca. 590?Ma) evaporitic sulphate (+23 to +34‰) with C_org-rich fluids in a closed system. The Melkedalen (+12 to +15‰), stratabound, fault-controlled, Cu–Zn sulphide deposit is hosted by the ca. 595?Ma dolomitised Melkedalen marble. The deposit is composed of several generations of ore minerals which formed by replacement of host dolomite. Polyphase hydrothermal fluids were introduced during several reactivation episodes of the fault zone. The positive δ³⁴S values with a very limited fractionation (<3‰) are indicative of the sulphide-sulphur generated through abiological, thermochemical reduction of seawater sulphate by organic material. The vein-type Cu (±Au–W) occurrences at Baugefjell, Bugtedalen and Baugevatn (?8 to ?4‰) are of hydrothermal origin and obtained their sulphur from igneous sources with a possible incorporation of sedimentary/diagenetic sulphides. In a broad sense, all the stratiform/stratabound, sediment-hosted, sulphide occurrences studied formed by epigenetic fluids within two probable scenarios which may be applicable separately or interactively: (1) expulsion of hot metal-bearing connate waters from deeper parts of sedimentary basins prior to nappe translation (late diagenetic/catagenetic/epigenetic fluids) or (2) tectonically driven expulsion in the course of nappe translation (early metamorphic fluids). A combination of (1) and (2) is favoured for the stratabound, fault-controlled, Melkedalen and Langvatnet occurrences, whereas the rest are considered to have formed within option (1). The sulphides and their host rocks were transported from unknown distances and thrust on to the Fennoscandian Shield during the course of the Caledonian orogeny. The displaced/allochthonous nature of the Ofoten Cu–Pb–Zn ‘metallogenetic province’ would explain the enigmatically high concentration of small-scale Cu–Pb–Zn deposits that occur only in this particular area of the Norwegian Caledonides.     

Geology and geophysics as successful tools in the discovery of the Lagoa Salgada Orebody (Sado Tertiary Basin – Iberian Pyrite Belt), Grândola, Portugal

Gravimetry was the main exploration method used in this high risk area to the north of the Grândola fault, in the Iberian Pyrite Belt (IPB). It showed several targets, among which the Valverde-Lagoa Salgada area stood out. Here, in August 1992, a polymetallic massive sulphide orebody was found, named Lagoa Salgada. According to the geological characteristics of the area and to the nature of the surveyed targets, other exploration techniques were used, namely: geology, magnetometry, resistivity, electrical sounding, magneto-telluric, seismic and mechanical drilling. The deposit was found under a Tertiary cover, 128?m in depth, complete with a 15?m thick gossan, caused by paleoalteration, with a supergene enrichment zone. This gossan gave way to massive sulphides, with intersections, at times, exceeding 60?m. They are limited towards the footwall by an important fault with strong associated kaolinization, which is interpreted as a reverse fault, placed on the inverse limb of an anticlinal structure. Throughout the deposit, the chemical composition of the mineralization showed great variation reaching significant values of Zn, Pb, Sn, Cu, As, Hg, Sb, Cd, Au and Ag. In the initial phase the deposit has an estimated tonnage of 5?Mt. It is related to a large gravity anomaly with the general orientation NW-SE, which was investigated by 15 boreholes made by the Instituto Geológico e Mineiro. The drilling cut an important volcanic centre of an acid to intermediate nature, around which intense hydrothermal activity was associated with contemporaneous sulphide mineralization. The gravity anomaly has two nuclei, a NW and a central one, about 450?m apart, where a pyrite orebody with polymetallic sulphides and stockwork sulphide mineralization are developed. This discovery led to an extensive exploration project that confirmed the mining potentialities of the NW sector of the IPB, to the north of Grândola fault, where previously no polymetallic sulphide occurrences were known.     

Geological and geochemical characteristics of the Baimazhai Ni-Cu-（PGE） sulphide deposit in Yunnan, China

The sulphide ores of the Baimazhai deposit, although typically orthomagmatic, locally exhibit peculiar textural features and are intimately associated with hydrothermal minerals, such as biotite, amphibole and chlorite. This association suggests that the magmatic sulphide ores were subjected to hydrothermal alteration and subsequent redistribution, resulting in the observed textural features. Geochemically, the Baimazhai sulphide ores are enriched in Cu, Pd and Au, which,according to previous studies, reflects the action of hydrothermal fluids. Interestingly, Ar-Ar dating yielded the plateau ages of about 160–170 Ma, which are at odds with the established Permian age of the Emeishan large igneous province. We interpreted these younger ages as due to thermal resetting during post-Permian tectonothermal events. We have proposed a model in which tectonic movements and hydrothermal fluids related to these events modified the pre-existing magmatic sulphides. Given the degree of overprint, we suggested two possible scenarios: 1) the sulphide disseminations that surround the massive magmatic ores are the result of deformation and hydrothermal alteration; and 2) there were both magmatic massive and disseminated sulphides, in which case the scale and relocation of remobilization would have been smaller, but still detectable.     

The Kamuikotan zone in Hokkaido, Japan: tectonic mixing of high-pressure and low-pressure metamorphic rocks

Abstract. In the Kamuikotan zone, central Hokkaido, Japan, two distinct types of metamorphic rocks are tectonically mixed up, along with a great quantity of ultramafic rocks; one type consists of high-pressure metamorphic rocks, and the other of low-pressure ones. The high-pressure metamorphic rocks are divided into two categories. (1) Prograde greenschist to glaucophaneschist facies rocks derived from mudstone, sandstone, limestone, a variety of basic rocks such as pillow and massive lavas, hyaloclastite and tuff, and radiolarian (Valanginian to Hauterivian) chert, among which the basic rocks and the chert, and occasionally the sandstone, occur as incoherent blocks (or inclusions) enveloped by mudstone. (2) Retrograde amphibolites with minor metachert and glaucophane-calcite rock, which are tectonic (or exotic) blocks enclosed within prograde mudstone or serpentinite, or separated from these prograde rocks by faults. The K-Ar ages of the prograde metamorphic rocks (72, 107 and 116 Ma on phengitic muscovites) are younger than those of the retrograde rocks (109, 132, 135 and 145 Ma on muscovites, and 120 Ma on hornblende). The low-pressure metamorphic rocks consist of the mafic members of an ophiolite sequence with a capping of radiolarian (Tithonian) chert with the metamorphic grade ranging from the zeolite facies, through the greenschist (partly, actinolite-calcic plagioclase) facies to the amphibolite (partly, hornblende-granulite) facies. The low-pressure metamorphism has a number of similarities with that described for'ocean-floor'metamorphism. The tectonic evolution of such a mixed-up zone is discussed in relation to Mesozoic plate motion.