Muskingum equation based downstream sediment flow simulation models for a river system

Applications of sediment transport and water flow characteristics based sediment transport simulation models for a river system are presented in this study. An existing water–sediment model and a new sediment–water model are used to formulate the simulation models representing water and sediment movement in a river system. The sediment–water model parameters account for water flow characteristics embodying sediment transport properties of a section. The models are revised formulations of the multiple water inflows model describing water movement through a river system as given by the Muskingum principle. The models are applied to a river system in Mississippi River basin to estimate downstream sediment concentration, sediment discharge, and water discharge. River system and the river section parameters are estimated using a revised and the original multiple water inflows models by applying the genetic algorithm. The models estimate downstream sediment transport rates on the basis of upstream sediment/water flow rates to a system. Model performance is evaluated by using standard statistical criteria;downstream water discharge resulting from the original multiple water inflows model using the estimated river system parameters indicate that the revised models satisfactorily describe water movement through a river system. Results obtained in the study demonstrate the applicability of the sediment transport and water flow characteristics-based simulation models in predicting downstream sediment transport and water flow rates in a river system.     

Modelling of meander migration in an incised channel

An updated linear computer model for meandering rivers with incision has been developed. The model simulates the bed topography, flow field, and bank erosion rate in an incised meandering channel. In a scenario where the upstream sediment load decreases （e.g., after dam closure or soil conservation）, alluvial river experiences cross section deepening and slope flattening. The channel migration rate might be affected in two ways： decreased channel slope and steeped bank height. The proposed numerical model combines the traditional one-dimensional （1D） sediment transport model in simulating the channel erosion and the linear model for channel meandering. A non-equilibrium sediment transport model is used to update the channel bed elevation and gradations. A linear meandering model was used to calculate the channel alignment and bank erosion/accretion, which in turn was used by the 1D sediment transport model. In the 1D sediment transport model, the channel bed elevation and gradations are represented in each channel cross section. In the meandering model, the bed elevation and gradations are stored in two dimensional （2D） cells to represent the channel and terrain properties （elevation and gradation）. A new method is proposed to exchange information regarding bed elevations and bed material fractions between 1D river geometry and 2D channel and terrain. The ability of the model is demonstrated using the simulation of the laboratory channel migration of Friedkin in which channel incision occurs at the upstream end.     

Simulating bed evolution following the Barlin Dam (Taiwan,China) failure with implications for sediment dynamics modeling of dam removal

The failure of the Barlin Dam in Taiwan, China offers an important case study for evaluating concepts in modeling the rapid erosion and channel recovery following intentional and unplanned dam removals. We present a modeling effort that applied a 1D and quasi-2D uncoupled hydraulics and sediment model (NETSTARS) to evaluate how discretization and parameterization influence thefitofbed elevationpredic-tions to observations following dam failure. Our analysis evaluated the model sensitivity to sediment transport function, active layer thickness, and number of stream tubes used to define the cross-section. Results indicate that a) the model is more sensitive to active layer thickness and sediment transport function than to the number of stream tubes, b) development of dam removal models are likely to benefit from varying the active layer thickness in time, and c) increased lateral discretization does not appear to improve model fit in the steep and rapidly changing river environment at our site. We conclude with discussion on differences between, identifying the need for, and general use of 1D, quasi-2D, and fully 2D models in dam removal and failure analysis.     

CASE STUDIES OF THREE-DIMENSIONAL NUMERICAL SIMULATION FOR TOTAL SEDIMENT TRANSPORT

1 INTRODUCTION With advances in computer technology and numerical methods, three-dimensional (3D) mathematical models for sediment transport are gradually applied more often and for more practical projects of hydraulic engineering. Three-dimensional mathematical river models can describe not only the secondary flow, but also the transport, deposition, and erosion of sediment in the river channel and the flood plain. However, at present the theories of sediment transport are not as well de…     

A SEM-based method to determine the mineralogical composition and the particle size distribution of suspended sediment

A robust method for characterizing the mineralogy of suspended sediment in continental rivers is introduced. It encompasses 3 steps: the filtration of a few milliliters of water, measurements of X-ray energy dispersive spectra using Scanning Electron Microscopy (SEM), and robust machine learning tools of classification. The method is applied to suspended particles collected from various Amazonian rivers. A total of more than 204,000 particles were analyzed by SEM-EDXS (Energy Dispersive X-ray Spectroscopy), i.e. about 15,700 particles per sampling station, which lead to the identification of 15 distinct groups of mineralogical phases. The size distribution of particles collected on the filters was derived from the SEM micrographs taken in the backscattered electron imaging mode and analyzed with ImageJ freeware. The determination of the main mineralogical groups composing the bulk sediment associated with physical parameters such as particle size distribution or aspect ratio allows a precise characterization of the load of the terrigenous particles in rivers or lakes. In the case of the Amazonian rivers investigated, the results show that the identified mineralogies are consistent with previous studies as well as between the different samples collected. The method enabled the evolution of grain size distribution from fine to coarse material to be described in the water column. Implications about hydrodynamic sorting of mineral particles in the water column are also briefly discussed. The proposed method appears well suited for intensive routine monitoring of suspended sediment in river systems.     

Prediction of sedimentation in reservoirs by combining catchment based model and stream based model with limited data

Estimation of sedimentation in reservoirs helps in the management and design of the reservoir's useful capacity. This research was done on the Awash River basin at the Koka Dam Reservoir in Ethiopia. The method applied was the loose integration of the Soil and Water Assessment Tool(SWAT) model and Hydrologic Engineering Center-River Analysis System(HEC-RAS) model for the estimation of the sediment load reaching the reservoir. The SWAT model was used for the estimation of erosion at the catchment level,and the HEC-RAS model was applied to estimate the sediment transport in the river channel. The implemented method allows sedimentation in the floodplains and bed shear stress to be considered in the sediment modeling, which cannot be considered in the SWAT model. In addition, the river cross sectional properties and the hydrodynamic processes in the rivers were considered in the modeling process. The data used in this study are a combination of i) observed data collected by government agencies, ii) data available online in data repositories, and iii) data extracted from remote sensing in the Shuttle Radar Topographic Mission(SRTM) Digital Elevation Model(DEM). The calibration and validation of the SWAT model was done by using Sequential Uncertainty Fitting(SUIF-2) calibration and validation tools. The HEC-RAS model was calibrated by adjusting the roughness factor. The output from the integrated approaches gives better estimates of flow and sediment near the inlet to the reservoir, with coefficients of determination of 0.85 and 0.67, respectively, and Nash Sutcliffe coefficients of model fit efficiency of 0.90 and 0.62, respectively, for daily simulations.     

PRINCIPLES OF RIVER TRAINING AND MANAGEMENT

River regulation and river training have been performed for various purposes and negative effects have been shown in numerous cases. In some cases the negative effects are so serious that humans have to consider to "renaturalize" the regulated rivers. Only by using the strategy of integrated river management the diverse river uses and natural fluvial processes and ecological systems may be harmonized. Based on analysis of case studies and data collected from literatures this paper presents the concept of integrated river management and four principles of river training. The integrated river management comprises: 1) taking the watershed, upper stream basin including the tributaries, middle and lower reaches and the estuary as an integrated entity in the planning, design and management; and 2) mitigating or controlling the negative impacts on hydrology, erosion and sedimentation, fluvial processes, land use and river use, environment and ecology while in achieving economic benefit from water resources development, flood safety management and hydropower exploitation. River training and management should be in accordance with the four principles: 1) extending the duration of river water flowing on the continent, which may be achieved by extending the river course or reducing the flow velocity; 2) controlling various patterns of erosions and reducing the sediment transportation in the rivers; 3) increasing the diversity of habitat and enhancing the connectivity between the river and riparian waters; and 4) restoring natural landscapes.     

An integrated suspended sediment transport monitoring and analysis concept

A new integrated suspended sediment monitoring strategy applying direct and indirect technologies is presented.Optical sensors continuously record the turbidity at one point in the channel cross section close to the river bank and are calibrated by water samples taken close to the sensor.Additionally measurements are performed to establish the distribution of suspended sediment in a cross section（bottle samples combined with acoustic devices）.Using correction factors（probe and cross-sectional factor） these monitoring methods are combined and it is,thus,possible to fully document the temporal and spatial variability of the suspended sediment transport and to estimate the suspended sediment load for certain time periods.This monitoring strategy was implemented at various measurement sites in Austria as well as at the Hainburg Road Bridge site on the Danube River.It has already been successfully applied for three years at this measurement site and suspended sediment loads during high discharges up to a 15 year flood event have been monitored.To evaluate the new monitoring methods the results were compared with load estimation methods found in the literature including averaging and ratio estimators as well as rating curves.The results prove that with the new methodology,the temporal variability of the suspended sediment transport can be detected more accurately compared with the other methods.They also demonstrate that the additional consideration of the spatial distribution of the suspended sediment concentration in the cross section is crucial as the mean concentration in the cross section can significantly exceed the concentration near the banks,especially at large rivers like the Danube River.     

GSTARS computer models and their applications, Part Ⅱ: Applications

In part 1 of this two-paper series, a brief summary of the basic concepts and theories used in developing the Generalized Stream Tube model for Alluvial River Simulation (GSTARS) computer models was presented. Part 2 provides examples that illustrate some of the capabilities of the GSTARS models and how they can be applied to solve a wide range of river and reservoir sedimentation problems. Laboratory and field case studies are used and the examples show representative applications of the earlier and of the more recent versions of GSTARS. Some of the more recent capabilities implemented in GSTARS3, one of the latest versions of the series, are also discussed here with more detail.     

CHANNEL WIDENING DURING DEGRADATION OF ALLUVIAL RIVER

1 INTRODUCTIONThe fluvial processes such as transihon of river pattrms, bank chat and advance, sedimentation anderosion of flood plains and channel beds can be Observed in alluvial rivers. These fluvial PrOcesses are allattributed to variations of the sediment caping caPacity of the flow and the erodibillty of bank matrialor soil. A river sechon may be widened by bank erosion and failure.For examPle, a river channel downstream of a reservoir is scoured because the flow released frOm the…     

Dependence of sediment sorting on bedload transport phase in a river meander

It is widely recognized nowadays that there are at least two different phases of bedload sediment transport in gravel‐bed rivers. However, the transition between these phases is still poorly or subjectively defined, especially at bends in rivers, where cross‐stream sediment transport can strongly influence changes in the texture of the transported sediment. In this paper, we use piecewise models to identify objectively, at two points in the cross‐section of a river bend, the discharge at which the transition between bedload transport phases occurs. Piecewise models were applied to a new bedload data set collected during a wide range of discharges while analysing the associated changes in sediment texture. Results allowed the identification of two well‐differentiated phases of sediment transport (phase I and phase II), with a breakpoint located around bankfull discharge. Associated with each phase there was a change in bedload texture. In phase I there was non‐dominance in the transport of fine or coarse fractions at a particular sampling point; but in phase II bedload texture was strongly linked to the position of the sampling point across the channel. In this phase, fine particles tended to be transported to the inner bank, while coarse sizes were transferred throughout the middle parts of the channel. Moreover, bedload texture at the inner sampling point became bimodal while the transport of pebble‐sized particles was increasing in the central parts of the river channel. It is suggested that this general pattern may be related both to secondary currents, which transfer finer particles from the outer to the inner bank, and to the progressive dismantling of the riverbed surface layer. Copyright © 2018 John Wiley & Sons, Ltd.     

MODELING OF RIVER MORPHOLOGIC CHANGES

ＭＯＤＥＬＩＮＧＯＦＲＩＶＥＲＭＯＲＰＨＯＬＯＧＩＣＣＨＡＮＧＥＳＣｈａｒｌｅｓＣ．Ｓ．ＳＯＮＧ；ＹｉｆａｎＺＨＥＮＧ；ａｎｄＣｈｉｈＴｅｄＹＡＮＧ（Ｐｒｏｆｅｓｓｏｒ，Ｓｔ．ＡｎｔｈｏｎｙＦａｌｌｓＨｙｄｒａｕｌｉｃＬａｂｏｒａｔｏｒｙ，Ｄｅｐａｒ...     

A QUASI-TWO-DIMENSIONAL STREAM TUBE MODEL FOR SIMULATING FLOW IN ALLUVIAL RIVERS

I. INTRODUCTIONIt is necessary, sometimes, to predict river bed deformahon during the alanning and design stages of a hydraulic project. As the nuvial process is quite complicated, the I --Dmathematical models currently in use can not satisfy the various needs in hydraulic engineering. Particularly in engineering practice, there is a strong desire of knowing the hydraulicconditions and river bed deformation in details. Some two dimensional models as well asqusi--two--dissensional models …     

Prediction of depth‐integrated fluxes of suspended sediment in the Amazon River: particle aggregation as a complicating factor

Large rivers have been previously shown to be vertically heterogeneous in terms of suspended particulate matter (SPM) concentration, as a result of sorting of suspended solids. Therefore, the spatial distribution of suspended sediments within the river section has to be known to assess the riverine sedimentary flux. Numerous studies have focused on the vertical distribution of SPM in a river channel from a theoretical or experimental perspective, but only a few were conducted so far on very large rivers. Moreover, a technique for the prediction of depth‐integrated suspended sediment fluxes in very large rivers based on sediment transport dynamics has not yet been proposed. We sampled river water along depth following several vertical profiles, at four locations on the Amazon River and its main tributaries and at two distinct water stages. Depending on the vertical profile, a one‐ to fivefold increase in SPM concentration is observed from river channel surface to bottom, which has a significant impact on the ‘depth‐averaged’ SPM concentration. For each cross section, a so‐called Rouse profile quantitatively accounts for the trend of SPM concentration increase with depth, and a representative Rouse number can be measured for each cross section. However, the prediction of this Rouse number would require the knowledge of the settling velocity of particles, which is dependent on the state of aggregation affecting particles within the river. We demonstrate that in the Amazon River, particle aggregation significantly influences the Rouse number and renders its determination impossible from grain‐size distribution data obtained in the lab. However, in each cross section, the Rouse profile obtained from the fit of the data can serve as a basis to model, at first order, the SPM concentration at any position in the river cross section. This approach, combined with acoustic Doppler current profiler (ADCP) water velocity transects, allows us to accurately estimate the depth‐integrated instantaneous sediment flux. Copyright © 2010 John Wiley & Sons, Ltd.     

The influence of sediment size,relative grain size and channel slope on initiation of sediment motion in boulder bed rivers. A lichenometric study

Sediment transport of four boulder bed rivers is studied using lichenometry. The presence of lichens on boulders in the river channel is used to date the last mobilization of the blocks. Using size frequency diagrams and regional growth curves calibrated with dated reference points it is possible to determine the flood event responsible for the last mobilization of each boulder with lichens present. The specific stream power of flood events over the last 60 years is then calculated, and thresholds of sediment transport based on the sediment size are calculated. The results from the four studied rivers are compared to similar relationships in the literature. Sediment motion thresholds appear to be very variable within the same type of river (mountainous boulder bed rivers). The critical specific stream power necessary to mobilize a particle of a given diameter may vary by up to 10 times from one river to the next. Bed sediment size and river slope may explain this large range of stream powers. Calculation of the relative size of the transported particles (D_i/D₅₀) also shows that both hiding and protrusion effects, as well as channels slope, are important factors in sediment transport. Copyright © 2010 John Wiley & Sons, Ltd.     

城市化对水系结构及其连通性的影响——以秦淮河中、下游为例

针对当前城市化所引起水系衰减、河流连通受阻以及由此所引起洪涝与水环境的问题,以秦淮河中、下游为例,选取1979和2006年两期流域遥感影像,分析了城市化影响下的下垫面变化特征;选取1980s和2009年的地形图对河流水系进行提取,借鉴景观生态学中河流廊道空间结构分析方法,通过不同时期水系分级,探讨了城市化对水系结构及其连通性的影响.结果表明:(1)城市化使得2006年城镇用地面积相比1979年增加84.54 km²,增加了9倍多,大量林草地、耕地以及水域转变成城镇用地;(2)河流长度在过去的30年里减少了41%,河道主干化趋势明显;河流发育呈现由多元到单一、由复杂到简单的趋势;(3)连通性参数连接率、实际结合度分别由原来的1.28、0.43下降到0.79、0.26,河流的连通性呈下降趋势.该研究将为城市化地区河流水系保护提供支持与参考.     

Channel pattern of proglacial rivers: topographic forcing due to glacier retreat

Glacier retreat leads to changes in channel pattern during deglaciation, in response to changing water, sediment and base level controls. Recent ongoing retreat at Skaftafellsjökull, Iceland (c. 50 m per year since 1998) has resulted in the formation of a sequence of river terraces, and several changes in river channel pattern. This paper compares widely used models of river channel pattern against the changes observed at Skaftafellsjökull. Doing this reveals the role of topographic forcing in determining proglacial channel pattern, whilst examining the predictive power and limitations of the various approaches to classifying river channels. Topography was found to play a large role in determining channel pattern in proglacial environments for two reasons: firstly, glacier retreat forces rivers to flow through confined moraine reaches. In these reaches, channels which theory predicts should be braided are forced to adopt a single channel. Secondly, proximal incision of proglacial rivers, accompanied by downstream aggradation, leads to changes in slope which force the river to cross channel pattern thresholds. The findings of this work indicate that in the short term, the majority of channel pattern change in proglacial rivers is due to topographic forcing, and that changes due to changing hydrology and sediment supply are initially relatively minor, although likely to increase in significance as deglaciation progresses. These findings have implications for palaeohydraulic studies, where changes in proglacial channel pattern are frequently interpreted as being due to changes in water or sediment supply. This paper shows that channel pattern can change at timescales faster than hydrological or sediment budget changes usually occur, in association with relatively minor changes in glacier mass balance. Copyright © 2014 John Wiley & Sons, Ltd.     

Stable channel analysis with sediment transport for rivers in Malaysia: A case study of the Muda,Kurau, and Langat rivers

Assessments of a stable channel were done to evaluate the conditions of three rivers in Malaysia,using an analytical method that modifies the stable channel flowchart developed by Chang(1988) and Ariffin(2004).The analytical approach was selected to calculate the suitable dimensions for a stable channel,using equations that describe the physical relation of sediment transport,flow resistance,and dynamic equilibrium.Measured field data were used as the input data for the stable channel program,wh...     

Effect of cross‐section interpolated bathymetry on 2D hydrodynamic model results in a large river

Two‐dimensional (2D) hydrodynamic models have been increasingly used to quantify aquatic habitat and stream processes, such as sediment transport, streambed morphological evolution, and inundation extents. Because river topography has a strong influence on predicted hydraulic conditions, 2D models require accurate and detailed bathymetric data of the stream channel and surrounding floodplains. Besides collection of mass points to construct high‐resolution three‐dimensional surfaces, bathymetries may be interpolated from cross‐sections. However, limited information is available on the effects of cross‐section spacing and the derived interpolated bathymetry on 2D model results in large river systems. Here, we investigated the effects of cross‐section spacing on flow properties simulated with 2D modeling at low, medium and high discharges in two morphologically different reaches, a simple (almost featureless with low sinuosity) and a complex (presenting pools, riffles, runs, contractions and expansions) reach of the Snake River (Idaho, USA), the tenth largest river in the United States in terms of drainage area. We compared the results from 2D models developed with complete channel bathymetry acquired with multibeam sonar data and photogrammetry, with 2D model results that were developed using interpolated topography from uniformly distributed transects. Results indicate that cross‐sections spaced equal to or greater than 2 times the average channel width (W*) smooths the bathymetry and suppresses flow structures. Conversely, models generated with cross‐sections spaced at 0.5 and 1 W* have stream flow properties, sediment mobility and spatial habitat distribution similar to those of the complete bathymetry. Furthermore, differences in flow properties between interpolated and complete topography models generally increase with discharge and with channel complexity. Copyright © 2013 John Wiley & Sons, Ltd.