随机动力系统最优控制准则研究

根据线性二次最优控制理论,给出了系统随机最优控制的控制律一般形式。从目标控制量的物理意义出发,提出了基于系统概率密度演化分析的最优控制准则,建立了递阶层次的演化过程控制准则类。以线性单自由度体系随机地震反应最优控制为例,分析了各控制准则类的权矩阵参数优化结果,并根据最优控制律进行了系统随机最优控制研究。结果表明,本文提出的系统随机最优控制的控制律确定方法可以对系统性态进行有效的控制。     

基于响应面法的连续刚构地震可靠度分析

地震可靠度是桥梁抗震研究中的重要问题。基于随机分析的响应面理论和规范反应谱法,提出了一种分析具有随机结构参数的桥梁地震可靠度的方法,研究了结构的破坏准则及其极限状态方程,计算了高墩大跨连续刚构桥在地震激励下设计基准期内的动力可靠度。分析时考虑了结构参数和场地土的随机性,分别计算了连续刚构在多遇地震、设防地震和罕遇地震作用下的失效概率,得到了结构在设计基准期内,"三水准设防标准"条件下的地震可靠度。结果表明,该桥设计满足抗震规范要求。     

多层结构MTMD振动控制系统参数优化研究

采用振动控制算法中的线性二次型最优控制,研究了在地震作用下的结构控制作用系统参数优化设计,即假定控制器数量、位置,对控制作用参数进行优化.将选取的主结构简化为多自由度模型,将MTMD(多重调谐质量阻尼器)对结构的反力与地震荷载共同作为结构的荷载输入分析;基于对主结构多模态耦合作用的考虑以及MTMD加载位置的初步假定,以二次型性能指标对系统状态方程加以控制.得到控制效果与利用最优参数法的结构控制效果做进一步比较验证.最后利用ANSYS优化设计模块,对已得到的控制器参数进行二次优化.     

基于二次型性能指标的控制器优化布置方法

本文建立了基于二次型性能指标的结构控制系统控制器最优布置方法。以控制器撤除时的系统最优控制性能指标增量作为控制器对系统最优控制的贡献，并用做确定经济的控制器数量和最优控制器位置的定量分析准则。本文中的控制器位置和控制器设计采用同一个优化性能指标，使得控制系统设计为最优。根据逼近满设置控制器结构控制系统的最优状态求得控制器降阶后等价的反馈控制增益。应用本文的方法对剪切模型框架结构上安装的锚索控制器进行了控制器的总体优化设计。数值分析表明，本文提出的控制器数量、位置和参数优化方法不仅易于实现，而且甚为有效。     

斜拉桥地震响应线性二次型迭代学习控制(LQILC)研究

最优控制方法是利用极值原理、最优滤波或动态规划等最优化方法来求解结构振动最优控制输入的一种设计方法。最优控制规律均是建立在系统理想数学模型基础上,而实际结构控制中往往采用降阶模型且存在多种约束条件,因此基于最优控制理论设计的控制器大都只能实现次最优控制。迭代学习控制理论的产生与发展,为结构振动主动控制提供了新的方法,但迭代学习控制的应用又受到其控制效果与其收敛性的制约。本文基于线性二次型最优控制与迭代学习控制相结合的思想,提出二次型最优迭代学习混合控制方法(LQILC),以二次型性能指标为控制目标,提高迭代的收敛速度;在性能指标的基础上进行迭代学习,改善了二次型最优控制的控制效果。以Emerson Memorial斜拉桥Benchmark模型为研究对象,采用二次型迭代学习控制策略(LQILC)对该桥的地震响应进行有效的控制,并得出Benchmark指标评价其对该桥的控制效果。     

工程结构地震破坏概率矩阵分析

本文提出了一种计算工程结构地震坡坏概率矩阵的方法，建立了地震地面运动模型和结构分析模型，对结构进行了随机地震反应分析，并获得了结构随机分应的统计量，进而采用双参数的结构破坏模型，给出了教育处结构地震破坏概率的表达式，利用此方法计算了一座按8度要求设计的钢筋混凝土框架型，给出了计算结构地震坡坏概率的表达式，利用此方法计算了一座按8度要求的钢筋混凝土框架结构的地震破坏概率矩阵，本文提出了方法可以在确定抗震设防标准和进行震害预测时采用。     

基于不同参数的基础隔震结构非线性概率密度演化

为了研究不同设计参数条件下基础隔震结构非线性响应的概率密度演化特征,采用两质点模型来模拟基础隔震结构,隔震层与上部结构分别采用Bouc-Wen模型与刚度退化的Bouc-Wen模型来描述其非线性特征,运用概率密度演化理论,进行隔震结构非线性随机地震响应的概率密度演化分析。采用基于物理的随机地震动模型生成人工地震动,提出基础隔震结构非线性随机地震响应的概率密度演化分析的基本步骤。通过改变基础隔震结构的设计参数,同时考虑激励的随机性,研究基础隔震结构非线性随机地震响应的概率密度演化规律。结果表明,基础隔震结构的阻尼比、周期比和屈重比取合理范围,能使隔震结构上部和下部的位移可控。     

钢筋混凝土框架结构造价与失效概率之间的近似关系研究

本文以层间位移角作为结构性能参数,分析了钢筋混凝土框架结构层间变形能力,以及在水平地震作用下层间位移反应。考虑钢筋混凝土框架结构材料强度和几何尺寸以及地震作用的不确定性,得出了在设计基准期内结构的失效概率。同时分析了不同设计参数下结构的最小造价,在此基础上,确定了结构最小造价和失效概率之间的近似关系。目的是为采用“投资—效益“准则确定该类型结构目标性能水平提供分析依据,从而为采用基于性能抗震设计理念制定建筑结构抗震设计规范提供基础研究。本文中,结构失效概率指结构最终极限状态的失效概率。     

粘滞阻尼减震结构抗震可靠度简化分析

通过设置粘滞阻尼器减小结构的地震反应是一种有效的被动控制方式,为与现行抗震设计水平相适应,减震结构和控制装置的设计也应该以可靠度为基础。本文结合粘滞阻尼减震结构的受力特性建立了此类耗能减震结构动力可靠度分析的实用简化计算方法。首先通过等价线性化方法,给出了层间三线型恢复力模型的等效平均刚度,粘滞阻尼器采用等效线性化的力学模型,建立了安装粘滞阻尼减震结构的等效线性随机分析模型。然后采用随机状态空间方法进行了粘滞阻尼减震结构的地震反应分析,基于层间变形失效准则和首次超越理论分析了粘滞阻尼减震结构的可靠度,并以粘滞流体阻尼器的变形超过其自身极限变形作为阻尼器的失效模式,讨论了粘滞阻尼器可靠度的计算。最后通过一个设置粘滞流体阻尼器的框架结构计算实例,说明了这种方法的运用。该方法可以作为一种实用的方法对振动控制结构在不同破坏状态下的抗震可靠度进行分析,为基于性能的抗震设计和优化提供参考。     

基于性态的抗震设计理论和方法的研究与发展

基于性态的抗震设计理论和方法是目前世界各国学术和工程界广泛关注的课题，本文从性态设计的理论框架、地震设防水准、结构抗震性态水准、结构抗震设计方法等四方面评术了国内外的研究和发展状况，并提出了若干值得重视的问题。     

Optimal control of linear buildings under seismic excitations

Considerable effort has been devoted to develop optimal control methods for reducing structural response under seismic forces. In this study analytical solution of the linear regulator problem applied widely to the control of earthquake‐excited structures is obtained by using the sufficient conditions of optimality even though almost all of the optimal controls proposed previously for structural control are based on the necessary conditions of optimality. Since the resulting optimal closed–open‐loop control cannot be implemented for civil structures exposed to earthquake forces, the solution of the optimal closed–open‐loop control is carried out approximately based on the prediction of the seismic acceleration values in the near future. Upon obtaining the relation between the exact optimal solution and future values of seismic accelerations, it is shown numerically that the solution of the optimal closed–open‐loop control problem can be performed approximately by using only the first few predicted seismic acceleration values if a given norm criteria is satisfied. Calculated performance measures indicate that the suggested approximate solution is better than the closed‐loop control and as we predict the future values of the excitation more accurately, it will approach the optimal solution. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

Merging energy‐based design criteria and reliability‐based methods: exploring a new concept

This paper examines the potential development of a probabilistic design methodology, considering hysteretic energy demand, within the framework of performance‐based seismic design of buildings. This article does not propose specific energy‐based criteria for design guidelines, but explores how such criteria can be treated from a probabilistic design perspective. Uniform hazard spectra for normalized hysteretic energy are constructed to characterize seismic demand at a specific site. These spectra, in combination with an equivalent systems methodology, are used to estimate hysteretic energy demand on real building structures. A design checking equation for a (hypothetical) probabilistic energy‐based performance criterion is developed by accounting for the randomness of the earthquake phenomenon, the uncertainties associated with the equivalent system analysis technique, and with the site soil factor. The developed design checking equation itself is deterministic, and requires no probabilistic analysis for use. The application of the proposed equation is demonstrated by applying it to a trial design of a three‐storey steel moment frame. The design checking equation represents a first step toward the development of a performance‐based seismic design procedure based on energy criterion, and additional works needed to fully implement this are discussed in brief at the end of the paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Seismic response control of frame structures using magnetorheological/electrorheological dampers

Semi‐active control of buildings and structures for earthquake hazard mitigation represents a relatively new research area. Two optimal displacement control strategies for semi‐active control of seismic response of frame structures using magnetorheological (MR) dampers or electrorheological (ER) dampers are proposed in this study. The efficacy of these displacement control strategies is compared with the optimal force control strategy. The stiffness of brace system supporting the smart damper is also taken into consideration. An extensive parameter study is carried out to find the optimal parameters of MR or ER fluids, by which the maximum reduction of seismic response may be achieved, and to assess the effects of earthquake intensity and brace stiffness on damper performance. The work on example buildings showed that the installation of the smart dampers with proper parameters and proper control strategy could significantly reduce seismic responses of structures, and the performance of the smart damper is better than that of the common brace or the passive devices. The optimal parameters of the damper and the proper control strategy could be identified through a parameter study. Copyright © 2000 John Wiley & Sons, Ltd.     

Probabilistic seismic demand analysis of controlled steel moment‐resisting frame structures

This paper describes a proposed methodology, referred to as probabilistic seismic control analysis, for the development of probabilistic seismic demand curves for structures with supplemental control devices. The resulting curves may be used to determine the probability that any response measure, whether for a structure or control device, exceeds a pre‐determined allowable limit. This procedure couples conventional probabilistic seismic hazard analysis with non‐linear dynamic structural analyses to provide system specific information. This method is performed by evaluating the performance of specific controlled systems under seismic excitations using the SAC Phase II structures for the Los Angeles region, and three different control‐systems: (i) base isolation; (ii) linear viscous brace dampers; and (iii) active tendon braces. The use of a probabilistic format allows for consideration of structural response over a range of seismic hazards. The resulting annual hazard curves provide a basis for comparison between the different control strategies. Results for these curves indicate that no single control strategy is the most effective at all hazard levels. For example, at low return periods the viscous system has the lowest drift demands. However, at higher return periods, the isolation system becomes the most effective strategy. Copyright © 2002 John Wiley & Sons, Ltd.     

双向偏心结构扭转耦联地震反应的序列最优控制

本文分析了不对称建筑结构平移-扭转耦联振动的动力特性及地震作用下的响应;根据地震动输入结构的过程,推导出一种更为一般的最优控制算法,所获得的控制力表达式同时包括地震响应和地震激励。通过对一非规则四层框架结构的扭转耦联地震反应控制分析表明,该算法不仅能有效地控制结构的平移地震反应,而且更有效地抑制结构的扭转耦联地震反应。     

A risk‐based life cycle cost strategy for optimal design and evaluation of control methods for nonlinear structures

The lack of direct correspondence between control objectives and hazard risks over the lifetime of systems is a key shortcoming of current control techniques. This along with the inability to objectively analyze the benefits and costs of control solutions compared with conventional methods has hindered widespread application of control systems in seismic regions. To address these gaps, this paper offers 2 new contributions. First, it introduces risk‐based life cycle–cost (LCC) optimal control algorithms, where LCC is incorporated as the performance objective in the control design. Two strategies called risk‐based linear quadratic regulator and unconstrained risk‐based regulator are subsequently proposed. The considered costs include the initial cost of the structure and control system, LCC of maintenance, and probabilistically derived estimates of seismic‐induced repair costs and losses associated with downtime, injuries, and casualties throughout the life of the structure. This risk‐based framework accounts for uncertainties in both system properties and hazard excitations and uses outcrossing rate theory to estimate fragilities for various damage states. The second contribution of this work is a risk‐based probabilistic framework for LCC analysis of existing and proposed control strategies. The proposed control designs are applied to the nonlinear model of a 4‐story building subjected to seismic excitations. Results show that these control methods reduce the LCC of the structure significantly compared with the status quo option (benefits of up to $1 351 000). The advancements offered in this paper enhance the cost‐effectiveness of control systems and objectively showcase their benefits for risk‐informed decision making.     

Nonstationary stochastic response of structural systems equipped with nonlinear viscous dampers under seismic excitation

Nonlinear viscous dampers are supplemental devices widely used for enhancing the performance of structural systems exposed to seismic hazard. A rigorous evaluation of the effect of these damping devices on the seismic performance of a structural system should be based on a probabilistic approach and take into account the evolutionary characteristics of the earthquake input and of the corresponding system response. In this paper, an approximate analytical technique is proposed for studying the nonstationary stochastic response characteristics of hysteretic single degree of freedom systems equipped with viscous dampers subjected to a fully nonstationary random process representing the seismic input. In this regard, a stochastic averaging/linearization technique is utilized to cast the original nonlinear stochastic differential equation of motion into a simple first‐order nonlinear ordinary differential equation for the nonstationary system response variance. In comparison with standard linearization schemes, the herein proposed technique has the significant advantage that it allows to handle realistic seismic excitations with time‐varying frequency content. Further, it allows deriving a formula for determining the nonlinear system response evolutionary power spectrum. By this way, ‘moving resonance’ effects, related to both the evolutionary seismic excitation and the nonlinear system behavior, can be observed and quantified. Several applications involving various system and input properties are included. Furthermore, various response parameters of interest for the seismic performance assessment are considered as well. Comparisons with pertinent Monte Carlo simulations demonstrate the reliability of the proposed technique. Copyright © 2014 John Wiley & Sons, Ltd.