Detachment and infiltration variations as consequence of regolith development in a Pyrenean badland system

The Araguás experimental catchment has been monitored to study badland dynamics in the Central Pyrenees. Previous studies of weathering processes within the catchment reported strong regolith dynamics associated with seasonal variations in the temperature and moisture regimes. A preliminary analysis of hydrological response and suspended sediment transport data recorded at a gauging station also demonstrated seasonal trends. The main objective of the present study is to understand the effect of regolith dynamics on sediment detachment and infiltration processes, based on field studies using simulated rainfall. The experiment design was based on seasonal differences in the physical conditions of surface regolith and the general trends of hydro‐sedimentological responses. Rainfall simulations were conducted on small plots using a pressure nozzle. Similar experimental rainfall conditions were set for all plots (rainfall intensity around 45 mm h^–1). The results showed strong variations in the infiltration and detachment responses closely associated with the regolith conditions and crusting development. Infiltration showed seasonal differences in time lag and intensity: average infiltration rates ranged from very low (2·05 mm h^–1) to moderated high values (44·04 mm h^–1) associated to regolith development conditions. Maximum sediment concentration, as an indicator of particles produced by detachment, also ranged from moderate (3 g l^–1) to extreme values (145 g l^–1). Mean and minimum infiltration rates showed negative correlations with initial moisture content. Sediment concentration showed a positive correlation with time lag, ponding, and sealing time, and a negative correlation with initial moisture. In terms of seasonal trends, infiltration and erosion responses were relatively stable during spring and autumn, whereas wide variations were recorded in infiltration rates and sediment detachment during summer and winter. As a general conclusion, the obtained results indicate that seasonal differences in detachment and infiltration depend on the nature of regolith development. Copyright © 2009 John Wiley & Sons, Ltd.     

Theory and applicability of a recrystallized grain size paleopiezometer

An approximate theoretical relation is derived which relates stress during steady state creep to both subgrain size and dynamically recrystallized grain size. The relation results from equating the dislocation strain energy in the grain boundary to that in the enclosed volume. Available data on metals and silicates are in excellent agreement with the theory. For paleopiezometry, the recrystallized grain size must be preserved by quenching, by cooling under stress, or by inhibition of grain growth by intimate mixture of two or more phases. In general, stress may be underestimated using rocks in which grain size has been reduced by dynamic recrystallization, especially if the grain size is very small. Stress may be overestimated using coarse grained rocks in which the grain size has increased toward the steady state value. Quantitative limits remain to be established. The theoretical relation can in principle be applied to any metal or mineral if only the effective isotropic elastic moduli and the Burgers vector are known. When used as a paleopiezometer, the technique indicates that high stresses on the order of 100 MPa are not infrequently associated with mantle diapirism and with large scale thrust faulting. Consideration of the Mt. Albert ultramafic body suggests that texturally inferred stresses from peridotite massifs and from ultramafic xenoliths in alkali olivine basalts might reflect either horizontal variations in stress across a rising diapir or else a vertical variation in stress as defined by the pyroxene geobarometer (Mercier et al. 1977). In either case the stresses are probably characteristic of local diapirism. Stresses characteristic of global upper mantle flow might be inferred from xenoliths originating from above kimberlite-producing diapirs.     

The threshold effect of image resolution on image‐based automated grain size mapping in fluvial environments

It has recently been demonstrated that surficial grain sizes in fluvial environments could be derived with automated methods applied to airborne digital imagery having a ground resolution of 3 cm. This letter seeks to further examine the potential of digital imagery for automated grain size mapping. In order to broaden the application of automated grain size mapping from airborne imagery, the effect of image resolution needs further study. Automated grain size mapping was attempted on an airborne digital image with a ground resolution of 10 cm. The results show that meaningful grain size information can be derived from 10 cm imagery. However, the ground resolution of the image acts as a size threshold below which no grain size information is detectable. Therefore, these results strongly suggest that future applications of automated grain size mapping will always be dependent on the ground resolution made available by the technology in use at the time of image acquisition. Copyright © 2005 John Wiley & Sons, Ltd.     

Paleoclimatic significance of grain size of loess-palaeosol deposit in Chinese Loess Plateau

Particle size analysis for samples from three last glacial cycle loess-palaeosol profiles along a northwestsoutheast transection on the Chinese Loess Plateau has been carried out. The paleoclimatic significance of grain size indices has been obtained by analyzing the fraction content variations and their comparisons with global ice volume and solar radiation variations. The results show that (i) paleoclimatic significance of the grain size indices of loess-palaeosol deposit is different with grain size fraction content and sampling points in Chinese Loess Plateau; (ii) the sub-coarse grain fraction is a good proxy index of East Asia winter monsoon strength and therefore can be used to detect the global climate changes; (iii) the content of sub-fine and fine grain fractions is influenced by both the input of sub-coarse grain fraction and pedogenesis; (iv) the sub-coarse fraction exhibits a negative relationship with the sub-fine and fine fractlon. Project supported by the 9.5 major project of Chinese Academy of Sciences and the open grant of the State Key Laboratory of Loess and Quaternary Geology, Chinese Academy of Sciences.     

The influence of sediment size,relative grain size and channel slope on initiation of sediment motion in boulder bed rivers. A lichenometric study

Sediment transport of four boulder bed rivers is studied using lichenometry. The presence of lichens on boulders in the river channel is used to date the last mobilization of the blocks. Using size frequency diagrams and regional growth curves calibrated with dated reference points it is possible to determine the flood event responsible for the last mobilization of each boulder with lichens present. The specific stream power of flood events over the last 60 years is then calculated, and thresholds of sediment transport based on the sediment size are calculated. The results from the four studied rivers are compared to similar relationships in the literature. Sediment motion thresholds appear to be very variable within the same type of river (mountainous boulder bed rivers). The critical specific stream power necessary to mobilize a particle of a given diameter may vary by up to 10 times from one river to the next. Bed sediment size and river slope may explain this large range of stream powers. Calculation of the relative size of the transported particles (D_i/D₅₀) also shows that both hiding and protrusion effects, as well as channels slope, are important factors in sediment transport. Copyright © 2010 John Wiley & Sons, Ltd.     

Grain-size distribution,morphoscopy and elemental chemistry of suspended sediments of Pindari Glacier,Kumaon Himalaya,India

Abstract

Suspended sediment concentrations in the meltwater of Pindari Glacier were determined at regular intervals in four ablation seasons. The late ablation periods (September 1994 and October 1995) were characterized by a reduced level of sediment concentration, while the sampling periods of early ablation (May 1994 and July 1995) showed very high concentrations of suspended sediment in the meltwater. Grain size distribution shows the dominance of medium and coarse silt fractions of the mean size of the suspended sediments between 4.35 and 5.82 ø. Clay size constitutes about 7% of the total size population. The majority of the samples are poorly sorted, symmetrically to finely skewed and mesokurtic in nature. The grain shows texture of mechanical and chemical origin, in which mechanical texture is predominant on most of the grains. It was observed that the grains were mostly subangular to subrounded in shape with variable size ranges. Bulk sediment chemistry consists mostly (>70%) of the five elements, Si, Al, K, Fe and Mg. Iron (Fe) and Mn are dominant heavy metals and sediments show the elemental abundance in the order of Fe > Mn > Zn > Cu > Ni > Pb. The Chemical Index of Alteration (CIA) of suspended sediments (57) is relatively higher than in the case of average unweathered upper continental crust (~50) indicating a higher degree of weathering due to glacier grinding and crushing action. Quartz is the most dominant mineral, followed by mica, illite, feldspar and kaolinite.     

Evolution of grain size distributions and bed mobility during hydrographs in gravel-bed braided rivers

Evolution of bed material mobility and bedload grain size distributions under a range of discharges is rarely observed in braiding gravel-bed rivers. Yet, the changing of bedload grain size distributions with discharge is expected to be different from laterally-stable, threshold, channels on which most gravel bedload theory and observation are based. Here, simultaneous observations of flow, bedload transport rate, and morphological change were made in a physical model of a gravel-bed braided river to document the evolution of grain size distributions and bed mobility over three experimental event hydrographs. Bedload transport rate and grain size distributions were measured from bedload samples collected in sediment baskets. Morphological change was mapped with high-resolution (~1 mm precision) digital elevation models generated from close-range digital photogrammetry. Bedload transport rates were extremely low below a discharge equivalent to ~50% of the channel-forming discharge (dimensionless stream power ~70). Fractional transport rates and plots of grain size distributions indicate that the bed experienced partial mobility at low discharge when the coarsest grains on the bed were immobile, weak selective mobility at higher discharge, and occasionally near-equal mobility at peak channel-forming discharge. The transition to selective mobility and increased bedload transport rates coincided with the lower threshold for morphological change measured by the morphological active depth and active width. Below this threshold discharge, active depths were of the order of D₉₀ and active widths were narrow (< 3% of wetted width). Above this discharge, both increased so that at channel-forming discharge, the active depth had a local maximum of 9D₉₀ while active width was up to 20% of wetted width. The modelled rivers approached equal mobility when rates of morphological change were greatest. Therefore, changes in the morphological active layer with discharge are directly connected to the conditions of bed mobility, and strongly correlated with bedload transport rate. © 2018 John Wiley & Sons, Ltd.     

沉积物金属元素变化的粒度效应--以太湖沉积岩芯为例

水体沉积物中金属元素含量变化除了与人为污染有关之外,在很大程度上受沉积物粒度、矿物组成等沉积物性质的影响．在进行沉积物金属元素研究中,要充分考虑沉积物金属元素含量变化的粒度效应．本文通过对太湖MS岩芯中17种金属元素、沉积物粒度、矿物组成等指标的分析,研究了金属元素变化特征以及与沉积物粒度组成的关系．MS岩芯金属元素变化可分为两类,第一类主要为Al、Fe、K等,该类元素在沉积岩芯中下部含量较高,岩芯上部含量较低;第二类为Na元素,在沉积岩芯中下部含量较低,岩芯上部含量升高．MS岩芯中金属元素与粘土含量之间具有显著相关关系,经沉积物粒度(粘土含量)校正后,沉积岩芯中金属元素含量趋于稳定．因此,沉积物粒度组成(粘土含量)是影响金属元素含量的主要因素,在研究太湖沉积物金属元素变化规律及进行金属污染评价时,应对金属元素含量进行粒度校正．     

Monte Vulture Volcano (Basilicata,Italy): an analysis of morphology and volcaniclastic facies

The earliest activity of Monte Vulture, central Italy, included ignimbrites but the bulk of the volcano was built up by plinian airfall deposits. Contemporaneous remobilisation of these deposits formed an apron of lahars around the base of the main cone. The volcano was constructed on a ridge; the valley to the east and tributaries to the north and south became sediment traps for volcaniclastic materials emplaced by fluvial reworking and directly from volcanic activity. To the west the valley was swept clear by active downcutting. Instability of the west flank as a result of this erosion was probably a contributory cause of major gravitational sector collapse on the volcano's flank, terminating the main cone-building phase. The resultant scar is an amphitheatre-shaped hollow called here the Valle dei Grigi. Previous workers have attributed this feature to coalescing calderas formed by engulfment. The last volcanic phase was the production of the Monticchio calderas and associated phreatomagmatic explosions producing airfall and surge deposits. Because most of the activity at Vulture has been repeated plinian eruptions producing similar assemblages of products, detailed stratigraphy of the volcano is difficult to accomplish. To characterise Vulture in terms of its products, various facies are identified and interpreted in relation to volcanic processes, distance from vent and environmental conditions.     

Trends in suspended sediment grain size in the upper Yangtze River and its tributaries,as influenced by human activities

Abstract

Based on data from five hydrometric stations, Pingshan station on the Jinshajiang River, Gaochang station on the Minjiang River, Wulong station on the Wujiang River, Wusheng station on the Jialingjiang River and Yichang station on the Yangtze River, a study has been made of the temporal variation in grain size of suspended sediment load in the upper Yangtze River. The results show that in the past 40 years, the grain size of the suspended sediment load in the main stem and major tributaries of the upper Yangtze River has had a decreasing trend, that can be explained by the effect of reservoir construction and implementation of soil conservation measures. The reservoirs in the upper Yangtze River Basin, all used for water storage for hydro-electric generation and/or irrigation, have trapped coarse sediment from the drainage area above the dam and, thus, the sediment released now is much finer than before the construction of the reservoirs. The downstream channels are all gravel-bedded or even in bedrock, with little fine sediment, and thus, the released flow can hardly get a supply of fine sediment through eroding the bed. Then, after the downstream adjustment, the grain size of suspended sediment is still fine. Large-scale soil conservation measures have significantly reduced sediment yield in some major sediment source areas. The relatively coarse sediment is trapped and, thus, the sediment delivered to the river becomes finer.     

Environmental records of lacustrine sediments in different time scales: Sediment grain size as an example

Understanding the past is the key to know thepresent and to predict the future. As a core project ofthe International Geosphere Biosphere Program, PastGlobal Changes (PAGES) aims to reconstruct theevolution history of global climate, global environ-ment and global ecosystem with resort to all kinds ofnatural records, so as to reveal the change rules(change processes, change amplitude and change rate)of the global environment and thus provide scientificbasis for predicting climate changes p…     

Relationships between multibeam backscatter,sediment grain size and Posidonia oceanica seagrass distribution

The use of data, including bathymetry, backscatter intensity and the angular response of backscatter intensity, collected using multibeam sonar (MBS) systems to recognise seabed types was evaluated in the inner shelf of central western Sardinia (western Mediterranean sea), a site characterised by a complex seabed including sandy and gravelly sediments, Posidonia oceanica seagrass beds growing on hardgrounds (i.e. biogenic carbonates) and sedimentary substrates.     

The role of lithology,catchment size and the alluvial zone on the hydrogeochemistry of two intermittent Mediterranean streams

Hydrology and solute concentrations of two intermittent Mediterranean streams draining two nested catchments were compared. The two catchments were mainly underlain by granitic rocks and different types of sericitic schists. Only the lowland catchment had an alluvial zone and a well‐developed riparian forest. The rainfall–runoff relationship and the correlation between daily flow concentrations showed that hydrological behaviour was similar at both sites during most of the year. However, reverse fluxes were detected during the wetting and drying up periods only in the stream with an alluvial zone. The intermittence in stream flow also had effects on absolute solute concentrations, temporal solute dynamics and streamwater stoichiometry. Streamwater chemistry was not affected by drainage area, except for cations produced mainly by bedrock dissolution (i.e. calcium and magnesium) that increased with increasing catchment size. Differences in the relationship among cations and anions were detected between the two streams, which could be attributed to biogeochemical processes occurring in the alluvial zone. The multivariate model used in this study showed that stoichiometry was more useful than absolute concentrations when analyzing the influence of different lithologies on streamwater chemistry. Such differences were amplified in autumn, likely due to a low hydrological connectivity between the two nested catchments. Copyright © 2007 John Wiley & Sons, Ltd.     

近百年来洞庭湖粒度指示的沉积环境演变特征

湖泊沉积物储存着长时期的流域环境信息,是百年尺度湖泊环境演变研究的高分辨率记录器。本文通过²¹⁰Pb_ex、¹³⁷Cs组合定年法,分析放射性核素剖面特征,研究沉积速率时空变化规律,并解析沉积物粒度指示的环境信息,揭示百年尺度湖泊沉积环境演变。结果表明:洞庭湖²¹⁰ Pb_ex剖面分布呈现多段衰变型、混合—衰变—平衡型、衰变—本底型和无沉积型4种类型。3大湖体200 cm的沉积深度对应的年代跨度为127～162年,构建了洞庭湖沉积物深度—年代关系。洞庭湖平均质量沉积速率为1.47～3.11 g/(cm²·a),整体上呈现南洞庭湖>西洞庭湖>东洞庭湖的空间特征;自1900年后,质量沉积速率增加了3～7倍,呈时序增加趋势。沉积年代上,沉积物粒度特征表明洞庭湖沉积环境呈3个阶段2个过渡期的演变特征,与同时期区域内毁林开荒、水利建设、植树造林等人为活动有较好的对应关系,说明近百年来人为活动是洞庭湖泥沙沉积的重要因素。本研究结果可为强化湖泊及其流域生态环境保护...     

Detailed measurements of thickness and grain size of a widespread onshore tsunami deposit in Phang‐nga Province,southwestern Thailand

Measurements of thickness and grain size along flow‐parallel transects across onshore deposits of the 2004 Indian Ocean tsunami revealed macroscopic horizontal variations and provided new insights into tsunami sedimentation. The tsunami caused severe erosion of beaches, river mouths, and the shallow seafloor along the coast of southwestern Thailand and supplied sufficient sediment to deposit a kilometer‐wide blanket of sand on the land surface. The tsunami deposits generally fine landward with some fluctuations caused by local entrainment and settlement of sediments. Sediments of medium and fine sand are restricted to a few hundreds of meters inland from their source, whereas finer grained sediments were suspended longer and deposited 1 km or more inland. Although the thickness of the tsunami deposits is strongly influenced by local topography, they generally thin landward. In areas of low‐relief topography, the rate of landward thinning is exponential and reflects the dominance of sediment supply to nearshore areas over that to areas farther inland.     

The paleoenvironmental significance of spatial distributions of grain size in groundwater‐recharged lakes: A case study in the hinterland of the Badain Jaran Desert,northwest China

For lakes in desert hinterlands that are not recharged by river runoff, sediment input solely comes from wind transport. While the processes of sediment transport and deposition in these lakes differ significantly from those with river discharge, the spatial distribution of sediment grain size in these groundwater‐recharged lakes remains largely unknown. Moreover, whether the grain size distribution in these lake sediments can be used as a proxy in the study of past climatic change and environmental evolution studies is unclear. In this study, five lakes with a range of surface areas that had no runoff recharge were selected from the hinterland of the Badain Jaran Desert of north‐western China, and a total of 108 samples of lake surface sediments were collected to examine the spatial distribution of grain size. Moreover, an end‐member‐modeling algorithm was used to calculate end members from all grain size measurements. Our results showed that both the median and mean grain sizes in the lake sediments decreased from the nearshore to the offshore, deep‐water zone. However, the lowest median and mean grain sizes were not found in the center of the lakes, in contrast to lakes recharged by surface runoff. The median grain size of sediment in the lake center was negatively correlated with lake level, and thus could help reveal lake evolution at low resolutions. Moreover, EM1 and EM2 were interpreted as wind transported sediment, and sediment perturbed by lake waves after wind transport, respectively. The modal grain size of EM1 varied slightly between lakes, while changes in the modal grain size of EM2 were related to lake area. Given the positive relationship found between EM2 content and lake level, changes in the EM2 content (%) can serve as a rough indicator of lake level fluctuations at low temporal resolutions. Copyright © 2017 John Wiley & Sons, Ltd.     

Impact of channel bar form and grain size variability on estimated stranding risk of juvenile brown trout during hydropeaking

Hydropeaking leads to artificial fluctuations in discharge and corresponding water levels with pronounced dewatering areas between base and peak flow along gravel bars and channel banks. In the present study, 16 hydropeaking reaches in Austria were investigated to assess possible differences in the estimated stranding risk for young of the year brown trout according to different gravel bar types and differences in microtopography roughness. Based on hydrodynamic‐numerical modelling, a predictive habitat modelling approach was implemented in the study design. Accompanied by grain size sampling along the various channel bars, a conceptual stranding risk model (SRM) was developed. The results showed that a high variability in estimated stranding risk exists for the tested sites considering discharge ratios of 1:3, 1:5 and 1:10. With respect to the discussion of establishing legal thresholds for ramping ratios in discharge, it was documented that, exemplarily, a discharge ratio base flow/peak flow of 1:5 (winter base flow conditions) could cause minor differences in the spatial extent of dewatering areas and the related estimated stranding risk for juvenile brown trout compared to a ratio of 1:2 for summer base flow conditions. Microtopographic roughness was addressed due to sampling and analysis of grain size distributions. Statistical testing of grain size distributions revealed significant differences between the surface material compositions of the investigated gravel bars. Those differences are evident, particularly for the coarser fraction (d₉₀), which is important as cover for young of the year brown trout. These aspects of grain size in habitat use and hydraulics have been addressed in the conceptual SRM. The results showed that point bar morphology, in particular, was less sensitive to the risk of stranding compared to, for example, alternating gravel bars. Considering the multiple pressures for alpine rivers, the improvement of structural features due to bar formation and related self‐forming processes is discussed as a possible alternative for future mitigation measures to reduce the negative impacts of hydropeaking. Copyright © 2014 John Wiley & Sons, Ltd.