Hydrologic processes that govern stormwater infrastructure behaviour

Using water budget data from published literature, we demonstrate how hydrologic processes govern the function of various stormwater infrastructure technologies. Hydrologic observations are displayed on a Water Budget Triangle, a ternary plot tool developed to visualize simplified water budgets, enabling side‐by‐side comparison of green and grey approaches to stormwater management. The tool indicates ranges of hydrologic function for green roofs, constructed wetlands, cisterns, bioretention, and other stormwater control management structures. Water budgets are plotted for several example systems to provide insight on structural and environmental design factors, and seasonal variation in hydrologic processes of stormwater management systems. Previously published water budgets and models are used to suggest appropriate operational standards for several green and grey stormwater control structures and compare between conventional and low‐impact development approaches. We compare models, characterize and quantify water budgets and expected ranges for green and grey infrastructure systems, and demonstrate how the Water Budget Triangle tool may help users to develop a data‐driven approach for understanding design and retrofit of green stormwater infrastructure.     

Urban irrigation in the modeling of a semi-arid urban environment: Ballona Creek watershed,Los Angeles,California

ABSTRACT

Ballona Creek watershed in Los Angeles, California provides a unique combination of heterogeneous urban land cover, a semi-arid environment, and a large outdoor water-use flux that presents a challenge for physically-based models. We ran simulations using the Noah Land Surface Model and Parflow-Community Land Model and compared to observations of evapotranspiration (ET), runoff, and land surface temperature (LST) for the entire 11-year study period. Both models were systematically adjusted to test the impact of land cover and urban irrigation on simulation results. Monthly total runoff and ET results are greatly improved when compared to an in-situ stream gauge and meteorological tower data: from 0.64 to 0.81 for the Nash–Sutcliffe efficiency (NSE) for runoff and from a negative NSE to 0.82 for ET. The inclusion of urban irrigation in semi-arid urban environments is found to be vital, but not sufficient, for the accurate simulation of variables in the studied models.     

Investigating the use of spatial discretization of hydrological processes in conceptual rainfall runoff modelling: a case study for the meso‐scale

In this study a simple modelling approach was applied to identify the need for spatial complexity in representing hydrological processes and their variability over different scales. A data set of 18 basins was used, ranging between 8 and 4011 km² in area, located in the Nahe basin (Germany), with daily discharge values for over 30 years. Two different parsimoniously structured models were applied in lumped as well as in spatially distributed according to two distribution classifications: (1) a simple classification based on the lithology expressed in three permeability types and (2) a more complex classification based on seven dominating runoff production processes. The objective of the study was to compare the performances of the models on a local and on a regional scale as well as between the models with a view to identifying the accuracy in capturing the spatial variability of the rainfall‐runoff relationships. It was shown that the presence of a specific basin characteristic or process of the distribution classification was not related with higher model performance; only a larger basin size promoted higher model performance. The results of this study also indicated that the permeability generally contained more useful information on the spatial heterogeneity of the hydrological behaviour of the natural system than did a more detailed classification on dominating runoff generation processes. Although model performance was slightly lower for the model that used permeability as a distribution classification, consistency in its parameter values was found, which was lacking with the more complex distribution classification. The latter distribution classification had a higher flexibility to optimize towards the variability of the runoff, which resulted in higher performance, however, process representation was applied inconsistently. Copyright © 2007 John Wiley & Sons, Ltd.     

Rainfall/runoff processes in a small peri‐urban catchment in the Andes mountains. The Rumihurcu Quebrada,Quito (Ecuador)

Situated at the foot of the Pichincha volcano, the city of Quito is frequently subjected to hydroclimatic hazards. In 1995 an 11·2 km² watershed, located in the vicinity of the city, was equipped with eight rain gauges and two flow gauges to better understand the local rainfall/runoff transformation processes. Rainfall simulation experiments were carried out on more than 40 one‐square‐metre plots to measure infiltration point‐processes. The high density of measurement devices allowed us to identify the origin and nature of the various contributions to runoff for the different physiographic units of the watershed: urban area from an altitude of 2800 to 3200 m; farmland, pasture and forested land, and finally páramo above 3900 m. Runoff occurs mainly in the lower part of the basin and is caused by urbanization; however, the natural soils of this area can also produce Hortonian runoff, which is predominant in a few events. This contribution can be studied through rainfall simulation experiments. In the upper natural zone, the younger and more permeable soils generate less runoff on the slopes. However, almost permanently saturated contributing areas, which are located in the bottom of the quebradas, may generate flood events, the size of which depends on the extent of the area concerned. Variations in the runoff coefficients are related first to the baseflow and second to the amount of rainfall in the previous 24 h. This analysis, which underlines the complexity of a small, peri‐urban, volcanic catchment, is a necessary preliminary to runoff modelling in an area where very few experiments have been carried out on small catchments. Copyright © 2001 John Wiley & Sons, Ltd.     

Evaluating the effect of scale in flood inundation modelling in urban environments

Cellular‐based approaches for flood inundation modelling have been extensively calibrated and evaluated for the prediction of flood flows on rural river reaches. However, there has only been limited application of these approaches to urban environments, where the need for flood management is greatest. Practical application of two‐dimensional (2D) flood inundation models is often limited by computation time and processing power on standard desktop PCs when attempting to resolve flows on the high‐resolution grids necessary to replicate urban features. Consequently, it is necessary to evaluate the effectiveness of coarse grids to represent flood flows through urban environments. To examine these effects, LISFLOOD‐FP, a 2D storage cell model, is applied to hypothetical flooding scenarios in Greenfields, Glasgow. Grid resampling techniques in GIS software packages are evaluated and a bilinear gridding technique appears to provide the most accurate and physically intuitive results. A gridding method maintaining sharp elevation changes at building interfaces and neighbouring land is presented and estimates of the discretization noise associated with the coarse resolution grids suggest little improvement over current gridding methods. The variation in model results from the friction sensitivity analysis suggests a non‐stationary response to Manning's n with changing model resolution. Model results suggests that a coarse resolution model for urban applications is limited by the representation of urban media in coarse model grids. Furthermore, critical length scales related to building dimensions and building separation distances exist in urban areas that determine maximum possible grid resolutions for hydraulic models of urban flooding. Copyright ©, 2008 John Wiley & Sons, Ltd.     

Temporal patterns and controls on runoff magnitude and solution chemistry of urban catchments in the semiarid southwestern United States

Urban expansion and the scarcity of water supplies in arid and semiarid regions have increased the importance of urban runoff to localized water resources. However, urban catchment responses to precipitation are poorly understood in semiarid regions where intense rainfall often results in large runoff events during the short summer monsoon season. To evaluate how urban runoff quantity and quality respond to rainfall magnitude and timing, we collected stream stage data and runoff samples throughout the 2007 and 2008 summer monsoons from four ephemeral drainages in Tucson, Arizona. Antecedent rainfall explained 20% to 30% of discharge (mm) and runoff ratio in the least impervious (22%) catchment but was not statistically related to hydrologic responses at more impervious sites. Regression models indicated that rainfall depth, imperviousness and their combined effect control discharge and runoff ratios (p < 0.01, r² = 0.91 and 0.75, respectively). In contrast, runoff quality did not vary with imperviousness or catchment size. Rainfall depth and duration, time since antecedent rainfall and event and cumulative discharge controlled runoff hydrochemistry and resulted in five specific solute response patterns: (i) strong event and seasonal solute mobilization (solute flush), (ii) event chemostasis and strong seasonal flush, (iii) event chemostasis and weak seasonal flush, (iv) event and seasonal chemostasis and (v) late seasonal flush. Our results indicate that hydrologic responses of semiarid catchments are controlled by rainfall partitioning at the event scale, whereas wetting magnitude, frequency and timing alter solute stores readily available for transport and control temporal runoff quality. Copyright © 2012 John Wiley & Sons, Ltd.     

Spatial scale effect on seasonal streamflows in permafrost catchments on the Qinghai–Tibet Plateau

The scale issue is of central concern in hydrological processes to understand the potential upscaling or downscaling methodologies, and to develop models for scaling the dominant processes at different scales and in different environments. In this study, a typical permafrost watershed in the Qinghai‐Tibet Plateau was selected. Its hydrological processes were monitored for 4 years from 2004 to 2008, measuring the effects of freezing and thawing depth of active soil layers on runoff processes. To identify the nature and cause of variation in the runoff response in different size catchments, catchments ranging from 1·07 to 112 km² were identified in the watershed. The results indicated that the variation of runoff coefficients showed a ‘V’ shape with increasing catchment size during the spring and autumn seasons, when the active soil was subjected to thawing or freezing processes. A two‐stage method was proposed to create runoff scaling models to indicate the effects of scale on runoff processes. In summer, the scaling transition model followed an exponential function for mean daily discharge, whereas the scaling model for flood flow exhibited a linear function. In autumn, the runoff process transition across multiple scales followed an exponential function with air temperature as the driving factor. These scaling models demonstrate relatively high simulation efficiency and precision, and provide a practical way for upscaling or downscaling runoff processes in a medium‐size permafrost watershed. For permafrost catchments of this scale, the results show that the synergistic effect of scale and vegetation cover is an important driving factor in the runoff response. Copyright © 2011 John Wiley & Sons, Ltd.     

Consistency between hydrological models and field observations: linking processes at the hillslope scale to hydrological responses at the watershed scale

The purpose of this paper is to identify simple connections between observations of hydrological processes at the hillslope scale and observations of the response of watersheds following rainfall, with a view to building a parsimonious model of catchment processes. The focus is on the well‐studied Panola Mountain Research Watershed (PMRW), Georgia, USA. Recession analysis of discharge Q shows that while the relationship between dQ/dt and Q is approximately consistent with a linear reservoir for the hillslope, there is a deviation from linearity that becomes progressively larger with increasing spatial scale. To account for these scale differences conceptual models of streamflow recession are defined at both the hillslope scale and the watershed scale, and an assessment made as to whether models at the hillslope scale can be aggregated to be consistent with models at the watershed scale. Results from this study show that a model with parallel linear reservoirs provides the most plausible explanation (of those tested) for both the linear hillslope response to rainfall and non‐linear recession behaviour observed at the watershed outlet. In this model each linear reservoir is associated with a landscape type. The parallel reservoir model is consistent with both geochemical analyses of hydrological flow paths and water balance estimates of bedrock recharge. Overall, this study demonstrates that standard approaches of using recession analysis to identify the functional form of storage–discharge relationships identify model structures that are inconsistent with field evidence, and that recession analysis at multiple spatial scales can provide useful insights into catchment behaviour. Copyright © 2008 John Wiley & Sons, Ltd.     

Hydrologic response to future land use change in the Upper Mississippi River Basin by the end of 21st century

This study demonstrates the spatial variation in hydrologic processes across the Upper Mississippi River Basin (UMRB) by the end of 21st century, by ingesting FOREcasting Scenarios (FORE‐SCE) of Land‐use Change projections into a physics‐based hydrologic model—Soil and Water Assessment Tool. The model is created for UMRB (440,000 km²), using the National Landcover Database of year 2001 and climate data of 1991–2010. Considering 1991–2010 as the baseline reference period, FORE‐SCE projections of year 2091 under three scenarios (A1B, A2, and B1 from the Intergovernmental Panel on Climate Change) are separately assimilated into the calibrated model, whereas climate input is kept the same as in the baseline. Modeling results suggest an increase of 0.5% and 3.5% in the average annual streamflow at the basin outlet (Grafton, Illinois) during 2081–2100, respectively, for A1B and A2, whereas for B1, streamflow would decrease by 1.5%. Under the “worst case” A2 scenario, 6% and 133% increase, respectively, in agricultural and urban areas with 30% depletion of forest and grassland would result into 70% increase in surface runoff, 20% decrease in soil moisture, and 4% decrease in evapotranspiration in certain parts of the basin. Conversion of cropland, forest, or grassland to perennial hay/pasture areas would lower surface runoff by 25% especially in the central region, whereas persistent forest cover in the northern region would cause up to 7% increase in evapotranspiration. The ecosystem in the lower half of UMRB is likely to become adverse, as dictated by a composite water–energy balance indicator. Future land use change extents and resultant hydrologic responses are found significantly different under A2, A1B, and B1 scenarios, which resonates the need for multi‐scenario ensemble assessments towards characterizing a probable future. The spatial variation of hydrologic processes as shown here helps to identify potential “hot spots,” giving ways to adopt more effective policy alternatives at regional level.     

An efficient methodology for estimating irrigation return flow coefficients of irrigated crops at watershed and seasonal scale

Irrigation return flow coefficients, i.e. the ratio between the quantity of water returned from the cultivated area to the groundwater system and the amount of abstraction, vary by more than 50% for rice cultivation using standing water irrigation to 0% in the case of drip irrigation technique. This component of the groundwater budget plays an important role, particularly in intensively irrigated areas. Thus, to avoid any inaccurate aquifer budgeting, modelling and consequently any erroneous watershed management, this component needs to be accurately assessed for a particular time‐step (e.g. weekly, seasonally) onto the studied area. The present paper proposes a cost‐effective and useful methodology for assessing irrigation return flow coefficients (C_f = irrigation return flow/pumping flow) based on (i) basic crops field survey and meteorological data and (ii) the use of a simple hydraulic model that combines both water balance technique and unsaturated/saturated flow theory. An attempt to estimate the uncertainty of irrigation return flow coefficient estimates based on the uncertainty introduced by the pumping and the natural spatial variability of the soil characteristics is also proposed. Results have been compared to real field conditions and allow us to (i) estimate the uncertainty and (ii) validate and demonstrate the robustness of the applied methodology. The proposed methodology allows relatively good estimates of the irrigation return flow coefficients at watershed and seasonal scale. The irrigation return flow coefficients are calculated as: 51 ± 8% in rainy season (Kharif) and 48 ± 4% in summer (Rabi) for rice; 26 ± 11% in rainy season and 24 ± 4% in summer for vegetables; 13 ± 8% in rainy season and 11 ± 3% in summer for flowers. These results were found to be consistent with the existing literature. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental study of water fluxes in a residential area: 1. Rainfall,roof runoff and evaporation: the effect of slope and aspect

An experimental study of water fluxes from roofs in a residential area has quantified water fluxes from different types of roof and identified the major controls on the process. Roofs with pitches of 0°, 22° and 50° and orientations of 15° (from true north) (NNE) and 103° (ESE) were selected. A novel automatic system for monitoring has been developed. Noticeable differences in rainfall, runoff and evaporation were found for different roof slopes, aspects and heights. Depending on height, flat roofs collected 90 to 99% of rainfall recorded at ground level. Roofs with a 22° slope; facing south‐south‐west (i.e. facing the prevailing wind) captured most rain, whereas east‐south‐east facing roofs with slopes of 50° received the least. Depending on the roof slope, the average rainfall captured ranged from 62 to 93% of that at ground level. For the same slope, the results indicated that from roofs orientated normal to the prevailing wind; (i) captured rainfall was higher, (ii) evaporation was higher and (iii) runoff was less than that from roofs having other aspects. Monthly variations in the runoff–rainfall ratio followed the rainfall distribution, being lowest in summer and highest in winter. The highest mean ratio (0·91) was associated with the steeper roof slope; the lowest ratio (0·61) was for roofs facing the prevailing wind direction. For the same amount of rainfall, the runoff generated from a steeper roof was significantly higher than that generated by a moderate roof slope, but the lowest runoff was from roofs facing the prevailing wind. The results have also shown that the amount of runoff collected (under UK climatic condition) was sufficient to supply an average household in the studied area with the major part of its annual water requirements. The use of this water not only represents a financial gain for house owners but also will help protect the environment by reducing demand on water resources through the reduction of groundwater abstraction, construction of new reservoirs, and a reduction of the flood risk as its in situ use is considered a preventive measure known as a source control. Copyright © 2003 John Wiley & Sons, Ltd.     

Hydrologic connectivity at the hillslope scale through intra-snowpack flow paths during snowmelt

The seasonal snowmelt period is a critical component of the hydrologic cycle for many mountainous areas. Changes in the timing and rate of snowmelt as a result of physical hydrologic flow paths, such as longitudinal intra-snowpack flow paths, can have strong implications on the partitioning of meltwater amongst streamflow, groundwater recharge, and soil moisture storage. However, intra-snowpack flow paths are highly spatially and temporally variable and thus difficult to observe. This study utilizes new methods to non-destructively observe spatio-temporal changes in the liquid water content of snow in combination with plot experiments to address the research question: What is the scale of influence that intra-snowpack flow paths have on the downslope movement of liquid water during snowmelt across an elevational gradient? This research took place in northern Colorado with study plots spanning from the rain-snow transition zone up to the high alpine. Results indicate an increasing scale of influence from intra-snowpack flow paths with elevation, showing higher hillslope connectivity producing larger intra-snowpack contributing areas for meltwater accumulation, quantified as the upslope contributing area required to produce observed changes in liquid water content from melt rate estimates. The total effective intra-snowpack contributing area of accumulating liquid water was found to be 17, 6, and 0 m² for the above tree line, near tree line, and below tree line plots, respectively. Dye tracer experiments show capillary and permeability barriers result in increased number and thickness of intra-snowpack flow paths at higher elevations. We additionally utilized aerial photogrammetry in combination with ground penetrating radar surveys to investigate the role of this hydrologic process at the small watershed scale. Results here indicate that intra-snowpack flow paths have influence beyond the plot scale, impacting the storage and transmission of liquid water within the snowpack at the small watershed scale.     

Quantifying and modelling urban stream temperature: a central US watershed study

Hydrologic models that rely on site specific linear and non‐linear regression water temperature (T_w) subroutines forced solely with observed air temperature (T_a) may not accurately estimate T_w in mixed‐use urbanizing watersheds where hydrogeological and land use complexity may confound common T_w regime assumptions. A nested‐scale experimental watershed study design was used to test T_w model predictions in a representative mixed‐use urbanizing watershed of the central USA. The linear regression T_w model used in the Soil and Water Assessment Tool (SWAT), a non‐linear regression T_w model, and a process‐based T_w model that accounts for watershed hydrology were evaluated. The non‐linear regression T_w model tested at a daily time step performed significantly (P < 0.01) better than the linear T_w model currently used in SWAT. Both regression T_w models overestimated T_w in lower temperature ranges (T_w < 10.0 °C) with percent bias (PBIAS) values ranging from ?28.2% (non‐linear T_w model) to ?66.1% (linear regression T_w model) and underestimated T_w in the higher temperature range (T_w > 25.0 °C) by 3.2%, and 7.2%, respectively. Conversely, the process‐based T_w model closely estimated T_w in lower temperature ranges (PBIAS = 4.5%) and only slightly underestimated T_w in the higher temperature range (PBIAS = 1.7%). Findings illustrate the benefit of integrating process‐based T_w models with hydrologic models to improve model transferability and T_w predictive confidence in urban mixed‐land use watersheds. The findings in this work are distinct geographically and in terms of mixed‐land use complexity and are therefore of immediate value to land‐use managers in similarly urbanizing watersheds globally. Copyright © 2015 John Wiley & Sons, Ltd.     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

Characterizing and classifying urban watersheds with compositional and structural attributes

Current land-use classifications used to assess urbanization effects on stream water quality date back to the 1980s when limited information was available to characterize watershed attributes that mediate non-point source pollution. With high resolution remote sensing and widely used GIS tools, there has been a vast increase in the availability and precision of geospatial data of built environments. In this study, we leverage geospatial data to expand the characterization of developed landscapes and create a typology that allows us to better understand the impact of complex developed landscapes across the rural to urban gradient. We assess the ability of the developed landscape typology to reveal patterns in stream water chemistry previously undetected by traditional land-cover based classification. We examine the distribution of land-cover, infrastructure, topography and geology across 3876 National Hydrography Dataset Plus catchments in the Piedmont region of North Carolina, USA. From this dataset, we generate metrics to evaluate the abundance, density and position of landscape features relative to streams, catchment outlets and topographic wetness metrics. While impervious surfaces are a key distinguishing feature of the urban landscape, sanitary infrastructure, population density and geology are better predictors of baseflow stream water chemistry. Unsupervised clustering was used to generate a distinct developed landscape typology based on the expanded, high-resolution landscape feature information. Using stream chemistry data from 37 developed headwater catchments, we compared the baseflow water chemistry grouped by traditional land-cover based classes of urbanization (rural, low, medium and high density) to our composition and structure-based classification (a nine-class typology). The typology based on 22 metrics of developed landscape composition and structure explained over 50% of the variation in NO₃⁻-N, TDN, DOC, Cl⁻, and Br⁻ concentration, while the ISC-based classification only significantly explained 23% of the variation in TDN. These results demonstrate the importance of infrastructure, population and geology in defining developed landscapes and improving discrete classes for water management.     

Influence of land use on the quality of runoff along Israel′s coastal strip (demonstrated in the cities of Herzliya and Ra′anana)

This study presents an analysis of the quality of urban runoff from various land uses by remote‐sensing and GIS technology coupled with hydrological and chemical monitoring. The study areas were located in the cities of Herzliya and Ra′anana, in Israel′s coastal plain, where extensive urbanization has occurred over the last 30 years. Land uses in urban basins were analysed; rain and runoff were measured and sampled at measurement stations representing different land uses (residential, industrial, commercial and roads). The aim was to analyse uses by different remote‐sensing and GIS techniques, to evaluate the quality of urban storm water from various land uses and to verify a method for predicting the impact of urban land uses on the quantity and quality of urban storm water. The quality of urban storm water from residential areas was generally very high, and the water is suitable for reuse or direct recharge into the local aquifer. In light of the serious state of the Israeli water sector and the large amounts of unused runoff produced by Israel′s cities, together with the high quality of urban storm water drained from the residential areas, it is important to exploit this water source. Copyright © 2014 John Wiley & Sons, Ltd.     

Wood export prediction at the watershed scale

Wood export from a watershed is a function of peak annual discharge, but one hydrologic relationship alone does not fully explain observed variability. Consideration of physical processes that influence the amount of wood available for transport is needed. However, wood recruitment, storage, mobilization, breakage, and transport rates and processes remain difficult to quantify. A theoretical wood transport equation focused on variations in discharge was the motivation for investigation into watershed‐specific wood export rates. Herein, multiplicative coefficients categorized by water year type are developed, paired with the equation, and validated to provide a new method for prediction of wood export at the watershed scale. The coefficients are defined as representing a broad suite of watershed processes that encompass spatio‐temporally variable scales. Two complementary datasets from the 1097 km² mountainous North Yuba River, California watershed were used. Wood surveys above New Bullards Bar Reservoir yielded a wood availability estimate of 250 000–300 000 m³ along the channel network. Annual wood export into the reservoir was field‐surveyed in 2010, 2012 and 2013, and estimated in seven years via remotely sensed images over the 30 year study period of water years 1985–2014. Empirical, watershed‐scale wood export rates ranged from 0.3–5.6%. Comparison of predicted quantities using the new DVWP (discharge variations modified by watershed processes) wood export equation to observed wood export quantities resulted in an aggregate error rate of ±10%. When individual wood export quantities were compared, predicted to observed varied by 0.5–3.0 times. Total wood export of 59 000–71 000 m³ was estimated over the 30 year period, yielding a rate of 1.8 to 2.2 m³/year/km². Wood export predictive capabilities at the watershed scale may help water resource and regulatory agencies plan for wood transfers to augment downstream ecosystems. Copyright © 2017 John Wiley & Sons, Ltd.     

Hydrological effects of water reservoirs on hydrological processes in the East River (China) basin: complexity evaluations based on the multi‐scale entropy analysis

Using the multi‐scale entropy analysis (MSE), we study the effects of water reservoirs on the river flow records based on long streamflow series covering January 1, 1954 and December 31, 2009 at four representative hydrological stations, i.e. the Longchuan, the Heyuan, the Lingxia and the Boluo stations. Hydrological effects of two major water reservoirs, the Xinfengjiang and the Fengshuba water reservoirs, are evaluated. The results indicate that: (1) before the construction of the water reservoirs, the complexity of the streamflow series comes to be decreasing from the upper to the lower East River and which should be attributed to the topographical properties and buffering effects of the river channel; (2) construction of water reservoirs greatly increases the complexity degree of the hydrological processes, and this influence is subjected to a damping process with the increase of distance between the water reservoirs and the hydrological stations; (3) power generation is the major function of the water reservoirs in the East River basin. The results of this study should be of theoretical and scientific merits in terms of conservation of the ecological environment and also water resources management under the influences of climate changes and intensifying human activities. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of differential hillslope‐scale water retention characteristics on rainfall–runoff response at the Landscape Evolution Observatory

Hillslopes turn precipitation into runoff and thus exert important controls on various Earth system processes. It remains difficult to collect reliable data necessary for understanding and modeling these Earth system processes in real catchments. To overcome this problem, controlled experiments are being conducted at the Landscape Evolution Observatory at Biosphere 2, The University of Arizona. Previous experiments have revealed differences in hydrological response between 2 landscapes within Landscape Evolution Observatory, even though both landscapes were designed to be identical. In an attempt to discover where the observed differences stem from, we use a fully 3‐dimensional hydrological model (CATchment HYdrology) to show the effect of soil water retention characteristics and saturated hydraulic conductivity on the hydrological response of these 2 hillslopes. We also show that soil water retention characteristics can be derived at hillslope scale from experimental observations of soil moisture and matric potential. It is found that differences in soil packing between the 2 landscapes may be responsible for the observed differences in hydrological response. This modeling study also suggests that soil water retention characteristics and saturated hydraulic conductivity have a profound effect on rainfall–runoff processes at hillslope scale and that parametrization of a single hillslope may be a promising step in modeling rainfall–runoff response in real catchments.