共查询到19条相似文献,搜索用时 203 毫秒
1.
2.
3.
4.
吴建军 《资源导刊(河南)》2019,(1):43-43
2018年12月27日,按照自然资源部工作要求,河南省测绘地理信息局完成“三调”正射影像生产任务,并提交成果。正射影像生产是做好“三调”的前提和基础工作。该局根据影像覆盖情况,合理调度,科学组织,抽调下属单位的精兵强将承担正射影像生产任务,并充分利用已有的遥感影像、控制成果、数字高程模型以及以国产卫星为主的优于1米分辨率遥感影像,进行正射影像图制作。 相似文献
5.
本文介绍万分之一正射影像图的技术要求和制作方法,利用正射影像图在山区布设物化探测网的生产过程,与传统的测网布设方法相比,具有节省开支、降低消耗、减轻劳动强度、提高效率、精度均匀可靠等优点,完全能够满足普查阶段地质找矿的需要。 相似文献
6.
7.
8.
9.
本文介绍了精密单点定位的基本原理,提出了用数码航空摄影系统徕卡ADS100航测数据对单点定位技术进行研究,比较了基站差分、CORS站差分与精密单点定位技术处理POS结果的差异,分析了产生差异的一些原因,同时也比较了用这三种方法处理后的POS进行区域网平差的精度。实验表明,在有控制点的情况下,三种方法获得的平差精度基本一致,能满足1:2000正射影像图制作要求;即使在无控的条件下,用精密单点定位处理ADS100初始POS也能满足1:5000正射影像图制作要求。 相似文献
10.
分析了传统正射影像与真正射影像的区别,介绍了数字建筑模型及其生成数字表面模型的方法,简要阐述了真正射影像制作原理,介绍了目前主流的制作真正射影像的系统及其生产流程,进行了真正射影像生产试验。 相似文献
11.
12.
13.
14.
15.
16.
17.
论山东省矿山地质环境现状及存在问题 总被引:1,自引:0,他引:1
山东省是矿产资源大省,资源储量丰富,开采历史悠久,开发强度较大。矿产资源的开发在保障经济社会发展的同时,也引发了较多的矿山地质环境问题,破坏了局部生态环境,影响了人民生产生活。为推进生态山东、美丽山东建设步伐,谋划一个时期内的矿山地质环境保护与治理工作,根据国土资源部等五部局的统一部署,2017年山东省率先在全国开展了山东省矿山地质环境详细调查工作,共完成高精度遥感解译157 900km~2,矿山地质环境调查34 290km~2,调查矿山9 672座,水土样测试各200余件,取得了大量翔实的矿山地质环境调查数据。该文在深入分析调查成果的基础上,高度概括了由于矿产资源开采引发的地形地貌景观破坏、采煤塌陷、非煤矿山采空区及废弃矿井、占压土地资源等主要矿山地质环境问题的分布、规模、危害和治理工作开展等情况;客观剖析了山东省地质环境保护与治理存在的主要问题;科学预测了矿山地质环境保护与治理工作发展趋势,并针对性地提出了对策建议。 相似文献
18.
《山地科学学报》2021,(6)
Digital elevation models(DEMs) can be quickly and conveniently generated using very high resolution(VHR) satellite stereo images. Previous studies have evaluated and compared DEM accuracy based on VHR satellite stereo pairs collected by different satellite sensors. However, few studies analyzed the accuracy of a DEM based on stereo image pairs from a satellite with the same orbit and different orbits for a region with significant topographic fluctuations in the plateau area. Referring to former studies, this paper had two objectives: to generate a digital elevation model(DEM) and evaluate its horizontal and vertical accuracy over a plateau area with high relief; and to study the mapping capability of multiorbit and multitemporal stereo pair images in the plateau mountainous region. To achieve these objectives, we collected the 2015 Worldview-2 stereo image pair and another three World View-2 images acquired in 2013, 2014, and 2015. First, the 2015 DEM was obtained using a strict physical model based on along-track stereo image pairs, and the reliability of the DEM was verified with field data. Then, the images obtained in 2013, 2014, and 2015 were combined into different-orbit stereo image pairs, DEMs were produced using rational function models, and the DEMs were verified using field data and the 2015 DEM as standards. The results showed that the relief degree has a particular influence on the DEM, and the precision of the DEM decreases as the topographic relief increases. Off-nadir angles can also influence DEM accuracy, with a larger angle corresponding to a lower DEM accuracy. The research also shows that the DEM obtained from four sets of experiments meets the accuracy requirement of a 1:5,000 digital elevation map, digital line graphic(DLG), and digital orthophoto map(DOM). Among these four groups of DEMs, the one based on the 2015 stereo pairs with the same satellite achieved the highest precision. 相似文献
19.
重力勘探作为一种快速普查方法,在深部地质构造研究、区域地质构造划分及找矿勘探中均已取得显著的地质效果。自80年代后期,由于在重力测地工作中使用红外测距仪及高精度GPS定位技术,确保了重力测点位置及高程有较高的精度;在重力观测中普遍采用目前世界上精度最高的Lacoste型重力仪进行基点联测,采用对恒温系统改进后的Worden重力仪进行重力测点观测,使得重力测量的质量及精度都有了很大提高,为扩大重力法的应用提供了条件。本文给出的一例是;在我国某含油沉积盆地上,根据对实测1:25000高精度重力资料(布格重力异常总观测均方误差:60×10 ̄-8m/s ̄2)的处理及约束信息下多层界面反演结果,确定有利油气聚集的圈闭范围,推断含油层的大致规模。 相似文献