我国大地电磁测深新进展及瞻望

简要回顾了上世纪60－80年代，我国大地电磁测深工作的起步和发展， 较全面地介绍了90年代以来的新进展，并瞻望了新世纪的发展方向。     

Deep Electrical Resistivity Structure of the European Lithosphere in Poland Derived from 3-D Inversion of Magnetotelluric Data

Surveys in Geophysics - This paper presents a three-dimensional (3-D) model of the resistivity distribution in the European lithosphere at the junction between the East European Craton, the...     

Study of the Structure of the Shenzhen Fault Zone with the Magnetotelluric Method

The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference technique was used in both data observation and processing to eliminate the electromagnetic noise near the survey sites,and relatively smooth apparent resistivity curves were obtained.TM mode data and two-dimensional inversion method as NLCG were used to obtain the electrical structures underground.According to the surficial geology survey results on regional strata and distribution of magmatic bodies and faults,the electrical structures at depths less than 2000m of each profile were interpreted.Two regional faults,the Henggang-Luohu fault and the Liantang fault,and seven local faults consistent with the electrical boundaries were verified or discovered.The strata in the survey area were then related with the change of resistivity.Electrical horizontal slices of depths less than 5000m indicate that the Henggang-Luohu fault and the Liantang fault bifurcate at the shallow part but tend to merge in the deep part.     

Moment Tensor Solutions of Earthquakes in the Indian Ocean from Surface Waves and their Tectonic Implications

—Rayleigh and Love waves generated by sixteen earthquakes which occurred in the Indian Ocean and were recorded at 13 WWSSN stations of Asia, Africa and Australia are used to determine the moment tensor solution of these earthquakes. A combination of thrust and strike-slip faulting is obtained for earthquakes occurring in the Bay of Bengal. Thrust, strike slip or normal faulting (or either of the combination) is obtained for earthquakes occurring in the Arabian Sea and the Indian Ocean. The resultant compressive and tensional stress directions are estimated from more than 300 centroid moment tensor (CMT) solution of earthquakes occurring in different parts of the Indian Ocean. The resultant compressive stress directions are changing from north-south to east-west and the resultant tensional stress directions from east-west to north-south in different parts of the Indian Ocean. The results infer the counterclockwise movement of the region (0°–33°S and 64°E–94°E), stretching from the Rodriguez triple junction to the intense deformation zone of the central Indian Ocean and the formation of a new subduction zone (island arc) beneath the intense deformation zone of the central Indian Ocean and another at the southern part of the central Indian basin. The compressive stress direction is along the ridge axis and the extensional stress manifests across the ridge axis. The north-south to northeast-south west compression and east-west to northwest-southeast extension in the Indian Ocean suggest the northward underthrusting of the Indian plate beneath the Eurasian plate and the subduction beneath the Sunda arc region in the eastern part. The focal depth of earthquakes is estimated to be shallow, varying from 4 to 20 km and increasing gradually in the age of the oceanic lithosphere with the focal depth of earthquakes in the Indian Ocean.     

Magnetotelluric Studies at the San Andreas Fault Zone: Implications for the Role of Fluids

Fluids residing in interconnected porosity networks have a significant weakening effect on the rheology of rocks and can strongly influence deformation along fault zones. The magnetotelluric (MT) technique is sensitive to interconnected fluid networks and can image these zones on crustal and upper mantle scales. MT images have revealed several prominent electrical conductivity anomalies at the San Andreas Fault which have been attributed to the presence of saline fluids within such networks and which have been associated with tectonic processes. These models suggest that ongoing fluid release in the upper mantle and lower crust is closely related to the mechanical state of the crust. Where fluids are drained into the brittle crust, and where these fluids are kept at high pressures, fault creep is supported. Fluid fluxes from deeper levels, in combination with meteoric and crustal metamorphic fluid inflow, and in response to fault creep, leads to high-conductivity zones developing as fault zone conductors in the brittle portion of crust. In turn, the absence of crustal fluid pathways may be characteristic for mechanically locked segments of the fault. Here, MT models suggest that fluids are trapped at depth and kept at high pressures. We speculate that fluids may infiltrate neighboring rocks and in their wake induce non-volcanic tremor.     

罗云山山前断裂带阶地调查研究及其构造意义

Located at the west of the Linfen basin, the Luoyunshan piedmont fault zone controls the western boundary of the basin. According to the measurements of the terraces in eight gullies along the Luoyunshan fault zone, five levels of terraces, namely T1～T5 have developed in these gullies. The heights of terraces T1, T2, T3, T4 and T5 are about 3m, 8～10m, about 20m, about 30m and 40～50m, respectively. The dating data of the terraces and investigation of the faulted landforms show that the Luoyunshan fault zone has experienced much activity since the Late Quaternary. The uplift rate of the terraces was 0.41mm/a since the Middle-Late Pleistocene, and 0.75mm/a since the Holocene. The increasing trend of uplift rate of the terraces along the Luoyunshan fault zone from the Middle-Late Pleistocene to Holocene indicates the tendency of gradual tectonic uplift of the fault zone since the late Quaternary. This is in good agreement with the increasing trend of subsidence rate of the Linfen basin from the Late Pleistocene to Holocene.     

Crust Shortening of the Daliangshan Tectonic Zone in the Cenozoic Era and Its Implications

The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang (Tibet) Plateau. Since the Cenozoic era, the neotectonic deformation in the Daliangshan tectonic zone has presented not only sinistral slip and reverse faulting along the Daliangshan fault zone, but also proximate SN-trending crust shortening. It is estimated that the average crust shortening in the Daliangshan tectonic zone is 10.9±1.6 km, with a shortening rate of 17.8±2.2% using the method of balanced cross-sections. The crust shortening from folding occurred mainly in the Miocene and the Pliocene periods, lasting no more than 8.6 Ma. Based on this, a crust shortening velocity of 1.3±0.2 mm/a can be estimated. Compared with the left offset along the Daliangshan fault zone, it is recognized that crust shortening by folding plays an important part in transferring crustal deformation southeastward along the Xianshuihe-Xiaojiang fault system.     

大地电磁资料精细处理和二维反演解释技术研究(六)——交错模型的大地电磁二维反演

交错模型指的是由几组走向不同的线性构造（近似二维）在空间（纵向、横向）上组合而成的模型.对于电性结构,交错模型表现为纵向或横向上的构造存在电性主轴方位的变化.从构造维性的角度来看,交错模型是一种由二维模型组合而成的特殊的三维模型,直接对其进行大地电磁二维反演,不易获得可靠的反演结果.本文针对交错模型的特点,提出分频段-分区段反演方案.该方案首先需要借助于阻抗张量成像技术,在频率域确定组成交错模型的各线性构造的电性主轴,然后,针对不同的频段、区段,选择对应电性主轴的数据进行反演,通过初始模型的构建将不同电性主轴方位的反演结果对接起来.本文通过三维理论模型的研究,系统展示了分频段-分区段反演的全过程,归纳得到：在分频段反演时先做低频段反演,在分区段反演时先做二维性更不显著一侧的反演.最后,本文将这一技术用于郯庐断裂带中南段一条实测剖面的反演中,其结果与常规二维反演结果相比较,深部的信息更为丰富,且与其他已有地质、地球物理结果的可对比性更好,表明在构造复杂地区,大地电磁分频段-分区段二维反演具有较高的模型分辨率和可靠性.     

阳原-张北壳幔过渡带复杂性特征及其构造意义

研究区位于华北盆地西北、近东西向的燕山台褶带、北东向的山西断隆接合部.该区域及其周围构造复杂并且地震活动频繁.     

元谋断裂带（晚）新生代构造应力场浅析

活动断裂带是形迹组合、构造地貌特征及力学性质相呼应的构造体系.以元谋断裂带(晚)新生代地层内发育的构造透镜体、剪节理、张性裂隙等形迹组合及其发育序列为研究对象,通过吴氏网下半球赤平投影、节理玫瑰花图及张性裂隙性质分析等研究方法,推测元谋断裂带自(晚)新生代以来主要受早期的北北东-南南西向和晚期(元谋运动之后,约80万年)的北北西-北西西向水平主压应力场作用,改变了构造活动性质并确立了现在的构造形迹、地貌.     

Density Structure,Isostatic Balance and Tectonic Models of the Central Tien Shan

A new combined satellite-terrestrial model of the gravity field is used together with seismic data for construction of a density model of the lithosphere of the Central Tien Shan and for estimation of its isostatic balance. The Tien Shan is one of the most active intraplate orogens in the world, located about 1,500 km north of the convergence between Indian and Eurasian plate, and surrounded by stable Kazakh platform to the north and the Tarim block to the south. Although this area was extensively studied during recent decades, several principal problems, related to its structure and tectonics, remain unsolved up to now: (1) various geodynamic scenarios have been discussed so far to explain tectonic evolution, such as direct “crustal shortening,” intracontinental subduction and some others, but no definite evidence for any of them has been found. (2) Still, it is not clear why Tien Shan grows so far from the plate boundary at the Himalayan collision zone. Gravity modeling can provide valuable constraints to resolve these questions. The results of this study show that: (1) there exists a very strong deflection of the Tien Shan lithosphere from isostatic equilibrium. At the same time, the patterns of the isostatic anomalies are very different in the Western and Central Tien Shan. The latter one is characterized by much stronger variations. The best fit of the modeling results is found for the model according to which the Tarim plate partially underthrusts the Central Tien Shan; (2) negative density anomalies in the upper mantle under the central block possibly relate to magmatic underplating during the initial stage of the tectonic evolution. Therefore, the weak lithosphere could be the factor that initiates mountain building far away from the collision zone. Alternatively, this might be a gap after detachment of the eclogised lower crust and lithospheric lid, which is filled with the hot asthenospheric material.     

青藏高原东缘龙日坝断裂带南段晚第四纪活动及其构造意义

因缺少详细的地质调查,关于龙日坝断裂带南段是否具有强烈的晚第四纪活动及其在青藏高原东缘应变分配中承担的作用目前尚不清楚。卫星影像解译和野外调查结果表明龙日坝断裂带南段仅东南支存在晚第四纪活动,全长约50km,总体以右旋走滑为主,兼有逆断分量,全新世以来右旋平均走滑速率约为0.6mm/a,平均垂直滑动速率约为0.4mm/a。龙日坝断裂带南段活动强度较中段明显偏弱,但具备发生M_W7级左右地震的能力,在距今约800年以来曾发生过地表破裂型事件。结合重定位地震结果来看,龙日坝断裂带西侧和龙门山断裂带地震活跃,之间的丹巴地区可能主要表现为褶皱变形而地震活动微弱。青藏高原东缘之下的滑脱面自川西高原到四川盆地从约15km逐渐变深至20km左右,而又变浅,约为10km,这种滑脱面的深度变化可能是龙门山隆升和孕震的驱动机制。这项研究有助于川西地区的地震危险性评价和深入理解青藏高原东缘的应变分配和隆升机制。     

Magnetotelluric and seismological determination of the lithosphere-asthenosphere transition in Central Europe

We assembled all available magnetotelluric (MT) sounding curves that cover characteristic provinces of Europe. The depths of layers with increased electrical conductivities estimated from MT sounding curves by the respective authors were compared with a model of the lithosphere thickness derived from seismic P residuals. Regions of a relatively thin and thick lithosphere are characterized by positive and negative P residuals, respectively.

We have found a good correspondence with both sets of results. In the central part of the Pannonian Basin the depth of the lithosphere-asthenosphere transition is estimated at 60–80 km and 100–120 km at the flanks. The results for the Bohemian Massif show deeper levels of this transition between 100 and 200 km. These depths seem to be typical of the lithosphere base beneath the Variscan domain of Central Europe.     

Magnetotelluric study of the Teide (Tenerife) and Timanfaya (Tanzarote) volcanic areas

The application of a magnetotelluric surveying method, developed specifically for detection of strong conductivity contrasts, has permitted interpretations of the deep structure of two important volcanic formations in the Canary Archipelago: the Timanfaya (Lanzarote) and Teide (Tenerife) volcanoes. Beneath the Timanfaya volcano, a highly conductive body (p ≤ 1 Ω m) has been detected, which is interpreted as a shallow magma chamber associated with the eruption which took place between the years 1730 and 1736. The core of this intrusion, still largely molten, would be located at approximately 4 km depth and would still maintain temperatures in excess of 900 °C.In the Telde caldera the asymmetry of the apparent resistivity components indicates a double depression; furthermore, a highly conductive level encountered in the centre of the eastern part of the volcanic complex has been attributed to the persistance of relatively high temperatures in the root of the last salic dome, extruded inside the caldera. In both zones, the deep limiting horizon is a highly conductive layer corresponding to the mantle (15 km in Lanzarote and 13 km in Tenerife), whereas other, more superficial, discontinuities have been related to local structures.     

Geophysical Images of the North Anatolian Fault Zone in the Erzincan Basin, Eastern Turkey, and their Tectonic Implications

The collision between the Arabian and Eurasian plates in eastern Turkey causes the Anatolian block to move westward. The North Anatolian Fault (NAF) is a major strike-slip fault that forms the northern boundary of the Anatolian block, and the Erzincan Basin is the largest sedimentary basin on the NAF. In the last century, two large earthquakes have ruptured the NAF within the Erzincan Basin and caused major damage (M _s = 8.0 in 1939 and M _s = 6.8 in 1992). The seismic hazard in Erzincan from future earthquakes on the NAF is significant because the unconsolidated sedimentary basin can amplify the ground motion during an earthquake. The amount of amplification depends on the thickness and geometry of the basin. Geophysical constraints can be used to image basin depth and predict the amount of seismic amplification. In this study, the basin geometry and fault zone structure were investigated using broadband magnetotelluric (MT) data collected on two profiles crossing the Erzincan Basin. A total of 24 broadband MT stations were acquired with 1–2 km spacing in 2005. Inversion of the MT data with 1D, 2D and 3D algorithms showed that the maximum thickness of the unconsolidated sediments is ~3 km in the Erzincan Basin. The MT resistivity models show that the northern flanks of the basin have a steeper dip than the southern flanks, and the basin deepens towards the east where it has a depth of 3.5 km. The MT models also show that the structure of the NAF may vary from east to west along the Erzincan Basin.     

Accordant Summit Levels (ASLs) and Their Tectonic Deformation in the Denudational Areas of the North China Rift Zone

The North China rift zone,including the North China Plain rift zone and the middle Shanxi graben-rift zone,is a continental rift;geomorphologically,its most common and important characteristics are the multiple accordant summit levels (ASLs) in the denudational area.In this study three methods based on geomorphic analysis,that is,(1) unified topographic profiles,(2) cyclic knickpoints along longitudinal river profiles,and (3) depth contours of river downcutting,are used to identify the ASLs and analyze their tectonic deformation.The formation time of the ASLs is determined by geological and geomorphological evidence,the correlation with the sedimentary facies in the Plain rift zone,and K-Ar ages of basalts on the ASLs,indicating the rates of tectonic uplift.The North China rift zone has five ASLs,of which the highest and oldest ASL I is the remnant of a fossil peneplain formed before rifting and the other four lower and younger ones are pediplain-typed formed contemporaneously with rifting.Study of ASLs     

Three Dimensional Crustal Density Structure of Central Asia and its Geological Implications

This paper introduces the scale-depth law of multi-scale wavelet analysis for regional gravity data processing, and presents the results of its application to Central Asia for computation of the 3D crustal density structures. The wavelet analysis method is applied for characterizing 3D crustal density structure, producing five maps of density disturbance corresponding to different depths of equivalent layers in the crust. The results provide important evidence for the study of crustal structures and mass movement in Central Asia: (i) the small-scale and intensive linear density disturbances in the upper crust indicate Phanerozoic orogenic belts; (ii) there exists a horseshoe-shaped low-density belt in the middle crust coinciding with the Kazakhstan orocline; (iii) there is a very low density zone in the lower crust, extending from western Kunlun to Tianshan, probably indicating a lower-crust flow; (iv) there are a few lowdensity spots in the middle crust, which might be caused by low-density mass squeezing upward from the lower crust flows.     

Structure of Réunion Island (Indian Ocean) inferred from the interpretation of gravity anomalies

Réunion is a volcanic edifice whose origin is related to a hot spot in the Indian Ocean. Only 3% of its volume is emergent. Many geological and geophysical studies were carried out on Réunion Island during the 1980's but few of them allow study of the internal structure of the edifice. Several gravity surveys have been carried out on the island since 1976 and we have compiled the available data set. The lack of data on the western side of the island led us to conduct a regional survey in 1993 to obtain a more homogeneous distribution of the stations. Computation of Bouguer anomalies for different correction densities accounts for the variable density of the rocks constituting the edifice and provides a distribution of gravity anomalies interpreted as dense bodies of intrusive rocks inside the edifice. Two very large intrusive complexes can be unambiguously recognised: one beneath Piton des Neiges and one beneath the Grand Brûlé area. Both have been penetrated by geothermal exploration drill holes and the first is also known from outcrop observations. 2.5D simple models were constructed to reveal the geometry and extent of the buried intrusives. They are deeply rooted, extending several kilometres below sea level, and extensive (20–25 km long and 10–13 km wide for the Piton des Neiges complex, 12–15 km long and some kilometres wide for the Grand Brûlé complex). The development of such complexes implies that the activity of the two volcanic centres was long lasting and remained stable while the volcanoes were growing. The Grand Brûlé complex has been interpreted as relics of an old volcano named Alizés Volcano. The interpretation of the gravity maps suggests the presence of a ridge of dense rocks to the North of the axis joining the centres of Piton des Neiges and Piton de la Fournaise volcanoes. By analogy with the other structures, 2.5D models show that this structure would culminate between 0 and 1 km below sea level and be 15 km wide. This complex induces a maximum anomaly in Takamaka Valley and we thus propose to name it Takamaka Volcano. No geological evidence of the nature of these dense rocks is available but the ridge coincides with structures revealed by magnetic and seismic data. Interpretation of the Bouguer anomaly maps suggests that the inner gravity structure of Piton de la Fournaise is not characterised by the presence of a voluminous dense body but probably by more restricted concentrations of dense rocks. Some structures can be recognised: along the present NE and SE rift zones and in the previous central part of Piton de la Fournaise to the West of the present summit. The recent eastward migration of the centre of activity of Piton de la Fournaise accounts for the lack of a large positive anomaly beneath the active craters.     

Petrochemistry of sandstones from Neoproterozoic basins of the Bastar craton, Central Indian Shield: Implications for paleoweathering, provenance and tectonic history

Petrographic analysis and chemical analysis of major and trace elements including rare earth elements of the Neoproterozoic sandstones from the Chandarpur Group and the Tiratgarh Formation have been carried out to determine their provenance, tectonic setting and weathering conditions. All sandstone samples are highly enriched in quartz but very poor in feldspar and lithic fragments. Petrographically and geochemically these sandstones are classified as subarkose, sublitharenite and arenite. The Chemical Index of Alteration (CIA mean 68) and Th/U ratios (mean 4.2) for these sandstones suggest their moderate weathering nature. Generally, all sandstone samples are strongly depleted in major elements (except SiO₂), trace elements (except Zr) and REE in comparison with Post Archean Australian Shale (PAAS) and Upper Continental Crust (UCC). Their mineralogy and mean of elemental ratios suitable for determination of provenance and tectonic setting, e.g. Al₂O₃/SiO₂ (0.02), K₂O/Na₂O (10), Eu/Eu* (0.67), (La/Lu)n (10.4), La/Sc (3), Th/Sc (1.2), La/Co (0.22), Th/Co (0.08), and Cr/Th (7.2), support a felsic source and a passive margin tectonic setting for these sandstones. Also these key elemental ratios do not show much variation over a range of SiO₂. Thus we attest their significance in determining source rock characteristics of quartz rich sandstones. Chondrite‐normalized REE patterns with LREE enrichment and a strong negative Eu anomaly are also attributed to felsic source rock characteristics for these sandstones. The source rocks identified are granite and gneiss of the Bastar craton. Minor amounts may have been derived from older supracrustals of the Bastar craton. However, the major element data of the Paleoproterozoic Sakoli schists when compared with those of the Neoproterozoic sandstones indicate that the schists were derived from a mafic source and deposited in an active continental margin tectonic setting. There is, however, little difference in CIA values between the Paleoproterozoic Sakoli schists and Neoproterozoic sandstones, indicating prevailing of similar (moderate‐intense) weathering conditions throughout the Proterozoic in the Bastar craton. Our study also suggests a change in the provenance and tectonic setting of deposition of sediments from dominantly a mafic source and an active continental margin in the Paleoproterozoic to dominantly granite and gneiss (felsic source) and a passive continental margin in the Neoproterozoic in the Bastar craton.     

Tectonic evolution of the ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic belts from central China

Abstract In the Triassic suture between the Sino-Korean and Yangtze cratons, the Dabie metamorphic Complex in central China includes three tectonic units: the northern Dabie migmatitic terrane, the central ultrahigh-P coesite- and diamond-bearing eclogite belt, and the southern high-P blueschist-eclogite belt. This complex is bounded to the north by a north-dipping normal fault with a Paleozoic accretionary complex and to the south by a north-dipping reverse fault with Yangtze basement plus its foreland fold-and-thrust sequence. Great differences in metamorphic pressure suggests that these units reached different depths during metamorphism and their juxtaposition occurred by wedge extrusion of subducted old continental fragments. These units were subsequently subjected to (i) Barrovian type regional metamorphism and deformation at shallow depths; (ii) intrusion of Cretaceous granitic plutons; and (iii) doming and segmentation into several blocks by normal and strike-slip faults. A new speculative model of tectonic exhumation of UHP rocks is proposed.