Complete mantle section of a slow-spreading ridge-derived ophiolite: An example from the Isabela ophiolite in the Philippines

Abstract   The Isabela ophiolite shows a complete ophiolite sequence exposed along the eastern coast of northern Luzon, the Philippines. It forms the Cretaceous basement complex for the northeastern Luzon block. This ophiolite is located at the northern end of a trail of ophiolites and ophiolitic bodies along the eastern margin of the Philippine Mobile Belt. This paper presents new findings regarding the nature and characteristics of the Isabela ophiolite. Peridotites from the Isabela ophiolite are relatively fresh and are composed of spinel lherzolites, clinopyroxene-rich harzburgites, depleted harzburgites and dunites. The modal composition, especially the pyroxene content, defines a northward depletion trend from fertile lherzolite to clinopyroxene-rich harzburgites and more refractory harzburgites. Variation in modal composition is accompanied by petrographic textural variations. The chromium number of spinel, an indicator of the degree of partial melting, concurs with petrographic observations. Furthermore, the Isabela ophiolite peridotites are similar in spinel and olivine major-element geochemistry and clinopyroxene rare earth-element composition to abyssal peridotites from modern mid-oceanic ridges. Petrological and mineral compositions suggest that the Isabela ophiolite is a transitional ophiolite subtype, with the fertile lherzolites representing lower sections of the mantle column that are usually absent in most ophiolitic massifs. The occurrence of the fertile peridotite presents a rare opportunity to document the lower sections of the ophiolitic mantle. The variability in composition of the peridotites in one continuous mantle section may also represent a good analogy of the melting column in the present-day mid-oceanic ridges.     

Subhorizontal tectonic framework of the Horoman peridotite complex and enveloping crustal rocks,south‐central Hokkaido,Japan

Geological observations in the Horoman area, south‐central Hokkaido, show that the Horoman peridotite complex of the Hidaka metamorphic belt is a tectonic slice about 1200 m thick. The peridotite slab is intercalated into a gently east‐dipping structure. The underlying unit is a Cretaceous–Paleogene accretionary complex. Riedel shear planes in the sedimentary layers of the accretionary complex near the structural bottom of the peridotite slab indicate top‐to‐the‐west (thrust) displacement. The overlying unit is composed of felsic–pelitic gneisses and mafic–felsic intrusive rocks (the Hidaka metamorphic rocks). The boundary surface between the peridotite complex and metamorphic rocks forms a domal structure. Microstructures of sheared metamorphic rocks near the structural top of the peridotite slab indicate top‐to‐the‐east (normal) displacement. The results combined with previous studies suggest that the Horoman peridotite complex was emplaced onto the Asian margin (Northeast Japan) during the collision between the Asian margin and the Hidaka crustal block.     

The effect of mantle composition on density in the extending lithosphere

The density distribution of the lithosphere is non-linear and discontinuous due to complex mineralogy and, most importantly, phase transitions. We evaluate the influence of changes in mantle composition on lithospheric density and its evolution during horizontal stretching, using thermodynamic calculations of the density as a function of pressure, temperature and composition. We also develop a simple parameterization based on end-member mineral reactions and geometric relationships between the geotherm and the phase boundary for comparison. The garnet–spinel peridotite transition leads to a moderate decrease in density of the mantle part of the lithospheric column at the initial stages of stretching. When the crust is sufficiently thinned and temperature is relatively high, plagioclase peridotite becomes stable in the upper part of the mantle. The density reduction due to the plagioclase-in reaction is controlled by bulk Al₂O₃ in the mantle and by the depth of the plagioclase-in reaction, which is mainly governed by the Na₂O/Al₂O₃ ratio. Since Na₂O and Al₂O₃ increase with the fertility of the mantle the phase transition effect is most pronounced for relatively fertile mantle (and strong extension) and can lead to 2.3% density reduction. This is equivalent to heating the entire lithosphere by 700 °C if only the effect of thermal expansion on density is taken into account. The formation of plagioclase peridotite can explain syn-rift uplift in sedimentary basins that experienced large mantle stretching without invoking an unrealistically strong increase in temperature. It might also be responsible for the break-up unconformity observed at continental margins.     

Peridotites from the southern Mariana forearc: Heterogeneous fluid supply in mantle wedge

Detailed petrological work was carried out on serpentinized peridotite dredged and sampled by submersible from the southern part of the Mariana Trench to reveal the nature of the mantle wedge in the southern Mariana forearc. The southern part of the Mariana Trench is important in that we should expect to find a transect of a typical island arc structure; that is, from east to west, the Mariana forearc, the Mariana arc proper, the Mariana Trough (active back-arc spreading center), and the West Mariana Ridge (remnant arc). The most striking feature of peridotites from the southern part of the trench is that primary hornblende is a major constituent mineral in many specimens. Thus, the peridotite samples are divided into anhydrous (A-type), hydrous (H-type) and intermediate (I-type) groups. Petrological data suggest that each type of peridotite is a residue of extensive partial melting in the upper mantle. It is argued here that the I- and H-type peridotites were modified from `proto-A-type peridotite' by fluid infiltration. The fluid was enriched in Al, Ti, Fe, and alkalis, and may have caused changes in mineral and bulk chemical compositions of the peridotites. A-type peridotite derives from the `proto-A-type peridotite' directly, without any fluid contamination. After the formation of the `proto-A-, I-, and H-type peridotites', lower-temperature fluids, probably of seawater origin, produced retrograde metamorphism and alteration including serpentinization. The mantle wedge in the southern Mariana forearc was heterogeneous in fluid supply.     

Characteristics of subcontinental lithospheric mantle beneath Baegryeong Island, Korea: Spinel peridotite xenoliths

Abstract   Geochemical data on Baegryeong Island spinel peridotites found in Miocene alkali basalt provide the information for lithosphere composition, chemical processes, equilibrium pressure and temperature conditions. Spinel peridotite xenoliths, showing transitional textures between protogranular and porpyroclastic textures, were accidentally trapped by the ascending alkali basalt magma. The xenoliths originate at depths from 50 to 70 km with a temperature range from 800 to 1100°C. The variations of modal and mineral compositions of the spinel peridotite xenoliths indicate that the xenoliths have undergone 1–10% fractional melting. The spinel peridotites from Baegryeong Island have undergone cryptic mantle metasomatism subsequent to melt extraction. Metasomatic agent of enriched spinel peridotite xenoliths was carbonatite melt.     

Mixed mantle provenance: diverse garnet compositions in polymict peridotites, Kaapvaal craton, South Africa

Garnet compositions are used to understand mantle petrogenesis and to reconstruct the lithostratigraphy of the shallow mantle (<200 km). However, garnets in polymict peridotites from the Kaapvaal craton (>2500 Ma) have a centimeter-scale elemental and stable isotopic variability suggestive of a mixed mantle provenance. The chemical heterogeneity of the garnets is similar to that reported from rocks sampled over a considerable depth and temperature range within the lower lithosphere. For example garnets found in polymict peridotites are similar to garnets found in sheared and granular peridotites, ‘cold’ and ‘hot’ lherzolites, peridotitic (P-type) diamond inclusions, and garnets from polybaric (50-200 km) peridotites (i.e. spinel, garnet and diamond facies). These data indicate that the Kaapvaal cratonic root has been disturbed by complex processes possibly associated with crack propagation and entrainment that juxtaposed garnet-bearing lithologies of diverse petrogenesis, provenance and depth. This has preserved chemical disequilibrium in the high pressure minerals in what is, in effect, a mantle breccia possibly associated with kimberlite precursors.     

Supra-subduction and mid-ocean ridge peridotites from the Piranshahr area,NW Iran

The Piranshahr metaperidotites in the northwestern end of the Zagros orogen were emplaced following the closure of the Neotethys ocean. The ophiolitic rocks were emplaced onto the passive margin of the northern edge of the Arabian plate as a result of northeastward subduction and subsequent accretion of the continental fragments. The metaperidotites have compositions ranging from low-clinopyroxene lherzolite to harzburgite and dunite. They are mantle residues with distinct geochemical signatures of both mid-ocean ridge and supra subduction zone (SSZ) affinities. The abyssal peridotites are characterized by high Al₂O₃ and Cr₂O₃ contents and low Mg-number in pyroxenes. The Cr-number in the coexisting spinel is also low. The SSZ mantle peridotites are characterized by low Al₂O₃ contents in pyroxenes as well as low Al₂O₃ and high Cr-number in spinel. Mineral chemical data indicate that the MOR- and SSZ-type peridotites are the residues from ∼15–20% and ∼30–35% of mantle melting, respectively. Considering petrography, mineralogy and textural evidence, the petrological history of the Piranshahr metaperidotites can be interpreted in three stages: mantle stable stage, serpentinization and metamorphism. The temperature conditions in the mantle are estimated using the Ca-in-orthopyroxene thermometer as 1210 ± 26 °C. The rocks have experienced serpentinization. Based on the textural observations, olivine and pyroxene transformed into lizardite and/or chrysotile with pseudomorphic textures at temperatures below 300 °C during the initial stage of serpentinization. Subsequent orogenic metamorphism affected the rocks at temperatures lower than 600 °C under lower-amphibolite facies metamorphism.     

Mineral chemistry of spinel peridotite xenoliths from Baengnyeong Island, South Korea, and its implications for the paleogeotherm of the uppermost mantle

Abstract   The mantle-derived xenoliths entrained in the Pliocene basanite from Baengnyeong Island, South Korea, are spinel lherzolites and spinel harzburgites. The overall compositional range of the Baengnyeong xenoliths matches that of the post-Archean xenoliths of lithospheric mantle origin from eastern China, but without any compositional evidence for a refractory Archean mantle root. Mineral compositions of the xenoliths have been used to estimate the equilibrium temperatures and pressures, and to construct a paleogeothermal gradient of the source region. The xenolith-derived paleogeotherm is constrained from about 820°C at 7.3 kbar to 1000°C at 20.6 kbar. Like those from the post-Archean Chinese xenoliths of lithospheric mantle origin, the Baengnyeong geotherm is considerably elevated relative to the conductive models at the depth of the crust–mantle boundary, reflecting a thermal perturbation probably related to lithospheric thinning. There is no significant P / T difference between harzburgite and lherzolite, which suggests that the harzburgites are interlayered with lherzolites within the depth interval beneath Baengnyeong Island.     

Relicts of deformed lithospheric mantle within serpentinites and weathered peridotites from the Godzilla Megamullion,Parece Vela Back‐arc Basin,Philippine Sea

Relicts of deformed lithospheric mantle have been identified within serpentinites and weathered peridotites recovered from nine dredge sites and one submersible dive site from across the Godzilla Megamullion, which was emplaced at the now‐extinct Parece Vela Rift in the Parece Vela Basin, a back‐arc basin in the Philippine Sea. The serpentinites consist dominantly of lizardite ± chrysotile and magnetite with minor relict primary minerals that include pyroxene, spinel, and rare olivine. The weathered peridotites consist of pyroxene, spinel, lizardite ± chrysotile, and magnetite as well as weathering products of olivine. These rocks were classified in hand specimen into three types with different structures: massive, foliated, and mylonitic. In thin‐section the serpentine minerals show no sign of deformation, whereas relict primary minerals show evidence of plastic deformation such as undulose extinction, kink bands, dynamic recrystallization, and weak to moderate crystallographic preferred orientations. Therefore, the serpentinites and weathered peridotites result from the static replacement and weathering of previously ductile‐deformed peridotite. Given their location close to or on the detachment surface that exposed them, the relicts of peridotite provide evidence of deformation in the lithospheric mantle that could be related to the formation and emplacement of the Godzilla Megamullion in the Parece Vela Rift.     

Shear localisation in upper mantle peridotites

Upper mantle peridotite bodies at the earth's surface contain relict structures and microstructures which provide direct information on the role and the mechanisms of shear localisation in the upper mantle. Deformation which occurred at high temperatures (T>950±50°C) is relatively homogeneous within domains ranging in scale from a few kilometres to a few tens of kilometres. Below 950±50°C strain is localised into centimetre to several hundred metre wide shear zones which commonly contain hydrated mylonitic peridotites. The microstructures developed in the peridotites suggest there is a correlation between the occurrence of shear localisation and the occurrence of strain softening and brittle deformation processes. The most important strain softening processes are inferred to be structural and reaction induced softening. Structural softening processes include dynamic recrystallisation and strain-induced transitions from dislocation creep to some form of grain-size-sensitive (GSS) creep. Reaction induced softening is related to the formation of fine grained polyphase reaction products which deform by GSS creep and the formation of weak sheet silicates such as phlogopite, chlorite, talc and antigorite. From experimental studies these softening processes and brittle deformation processes are inferred to occur mainly at temperatures less than about 910±160°C. This temperature range is inferred to be a significant rheological transition in the upper mantle. Below 910±160°C deformation during orogenesis may be accommodated by an anastomosing network of hydrated mylonitic shear zones with a distinct, perhaps weak, rheology. At higher temperatures strain is accommodated in much wider deformation zones.On the scale of the lithosphere the degree of localisation may be different to that determined at the scale of the periodotite massif. An anastomosing network of hundred metre wide mylonitic shear zones forming 0.05–0.3 by volume fraction of the mantle lithosphere atT<950°C could accommodate inhomogeneous or homogeneous bulk deformation depending on the spatial distribution and ordering of the mylonite zones. The higher temperature deformation at deeper levels in the mantle could be markedly inhomogeneous being concentrated in shear zones with widths in the range of 2–20 km, alternatively these zones may widen significantly during deformation, resulting in a decrease in the degree of localisation with increasing bulk strain.     

Deep melting and sodic metasomatism underneath the highly oblique-spreading Lena Trough (Arctic Ocean)

Abyssal peridotites collected along the highly oblique-spreading Lena Trough north of Greenland and Spitsbergen have mineral compositions that are similar to residual abyssal peridotites, except for high sodium concentrations in clinopyroxene (cpx). Most samples are lherzolites with light rare earth element (REE)-depleted cpx trace element patterns, but significantly fractionated middle to heavy REE ratios at relatively high heavy REE concentrations. Such characteristics can only be explained by initial melting of a garnet peridotite followed by low degrees of melting in the stability field of spinel peridotite. The residual garnet signature requires either a high potential temperature of the upwelling mantle, or elevated solidus-lowering water contents. The limited spinel field melting suggests a deep cessation of melt extraction, possibly because of the presence of a thick lithospheric cap. This is consistent with the extremely low effective spreading rate and the vicinity to a passive continental margin, which allow conductive cooling to reach deeper levels than commonly estimated for faster mid-ocean ridges. High sodium concentrations in cpx are neither explainable by melt refertilization, nor by a simple diffusion mechanism. The efficient fractionation of sodium from the light REE requires post-melting metasomatism, which is typically restricted to the subcontinental lithosphere. This might imply that the Lena Trough peridotites represent unroofed subcontinental mantle, from which no melt was extracted during the opening of the Lena Trough. It is more likely that sodic metasomatism occurred after partial melting underneath the Lena Trough, and that such an enrichment process is responsible for elevated sodium concentrations in abyssal peridotites elsewhere. Sodium in cpx of residual peridotites can therefore not serve as an indicator of partial melting or melt refertilization.     

Distribution of trace elements in spinel and garnet peridotites

The distribution of trace elements in the upper mantle has been discussed on the basis of the trace element abundances in bulk rocks and constituent minerals of two spinel and garnet facies peridotite xenoliths in alkali basalts from eastern China. The data presented are consistent with the suggestion that highly incompatible elements (Rb, Ba, Th, U, Sr, Nb, Ta) mainly reside in intergranular components, and to a lesser extent in fluid inclusions in minerals. The LILE composition in olivine and orthopyroxene can be seriously affected by the presence of fluid inclusions. Consequently the subsolidus partitioning of the LILE cannot be used to infer the olivine-melt and orthopyroxene-melt partition coefficients for these elements. There is a significant difference in (Opx/Cpx)_HREE ratios for spinel and garnet peridotites, suggesting a P-T control on equilibrium partition coefficients.     

Petrology of the diamond-grade eclogite in the Kokchetav Massif, northern Kazakhstan

Abstract The Kokchetav Massif of northern Kazakhstan is unique because of the abundant occurrence of microdiamond inclusions in garnet, zircon and clinopyroxene of metasediments. In order to determine precise pressure–temperature (P–T) conditions, we have systematically investigated mineral inclusions and the compositions of major silicates in Ti–clinohumite–garnet peridotite and diamond-grade eclogite from Kumdy–Kol. It was found that garnet peridotites from Kumdy–Kol contain assemblages of garnet, olivine, Ti–clinohumite and ilmenite. The garnet contains inclusions that are indicative of both ultrahigh pressure (UHP) and retrograde conditions. Inclusions of hydrous phases such as chlorite, amphibole and zoisite were formed at the post-UHP stage. The study also found that eclogite from Kumdy–Kol contains albite–augite symplectites after omphacitic pyroxene. The core of pyroxene (sodic augite) contains high K₂O (up to 1wt%; average 0.24wt%). Phengite is included in the core. Applying the K₂O-in-augite geobarometry, which is based on recent experiments, and the garnet–clinopyroxene (Grt–Cpx) geothermometer for peak metamorphism, the eclogites yield P–T estimates of > 6 GPa and > 1000 °C, and the diamond-grade eclogites yield lower temperature estimates at 900–1000 °C and 5 GPa.     

Dating of prograde metamorphic events deciphered from episodic zircon growth in rocks of the Dabie–Sulu UHP complex, China

The timing of ultra-high pressure (UHP) metamorphism has been difficult to determine because of a lack of age constraints on crucial events, especially those occurring on the prograde path. New Sensitive High-Resolution Ion Microprobe (SHRIMP) U–Pb age and rare-earth element (REE) data of zircon are presented for UHP metamorphic rocks (eclogite, garnet peridotite, garnet pyroxenite, jadeite quartzite and garnet gneiss) along the Dabie–Sulu UHP complex of China. With multiphase metamorphic textures and index mineral inclusions within zircon, the Dabie data define three episodes of eclogite-facies metamorphism, best estimated at 242.1 ± 0.4 Ma, 227.2 ± 0.8 Ma and 219.8 ± 0.8 Ma. Eclogite-facies zircons of the Sulu UHP complex grew during two major episodes at 242.7 ± 1.2 and 227.5 ± 1.3 Ma, which are indistinguishable from corresponding events in the Dabie UHP complex. A pre-eclogite metamorphic phase at 244.0 ± 2.6 Ma was obtained from two Sulu zircon samples which contain low pressure–temperature (plagioclase, stable below the quartz/Ab transformation) and hydrous (e.g., amphibole, stable below  2.5 Gpa) mineral inclusions. In terms of Fe–Mg exchange of trapped garnet–clinopyroxene pairs within zircon domains, we are able to determine the Pressure–Temperature (PT) conditions for a specific episode of metamorphic zircon growth. We suggest that mineral phase transformations and associated dehydration led to episodic eclogite-facies zircon growth during UHP metamorphism ( 2.7 Gpa) began at 242.2 ± 0.4 Ma (n = 74, pooling the Dabie–Sulu data), followed by peak UHP metamorphism (>  4 Gpa) at 227.3 ± 0.7 Ma (n = 72), before exhumation (<  220 Ma) to quartz stability (~ 1.8 Gpa). The Dabie–Sulu UHP metamorphism lasted for about 15 Ma, equivalent to a minimum subduction rate of 6 mm/year for the descending continental crust.     

Fractionation of platinum group elements in upper mantle: Evidence from peridotite xenoliths from Wangqing

The peridotite xenoliths from Wangqing display a downward-concave PGE pattern with Pt at maximum due to Pt-Pd fractionation, which is different from the flat or negatively sloped patterns commonly observed for worldwide peridotite xenoliths and massifs. Taking into account the difference in partition coefficients of Pt and Pd between alloy and sulfide melt, it is suggested that some of the Wangqing peridotites must have been equilibrated with a melt in which alloy and sulfide coexisted. Segregation of Pt-rich alloy from Pd-sulfide melts due to density contrast and extraction of residual melts without sulfide saturation resulted in the fractionation of Pt from Pd. Project supported by the Ministry of Human Affairs and a part of an international collaboration program between the Chinese Academy of Sciences and Centre National de Recherche Scientifique (CNRS, France), and Australian Institute of Nuclear Sciences and Engineering (AINSE) grant to SJR.     

A conceptual hydrogeological model of ophiolitic aquifers (serpentinised peridotite): The test example of Mt. Prinzera (Northern Italy)

The main aim of this study is the experimental analysis of the hydrogeological behaviour of the Mt. Prinzera ultramafic massif in the northern Apennines, Italy. The analysed multidisciplinary database has been acquired through (a) geologic and structural survey; (b) geomorphologic survey; (c) hydrogeological monitoring; (d) physico‐chemical analyses; and (e) isotopic analyses. The ultramafic medium is made of several lithological units, tectonically overlapped. Between them, a low‐permeability, discontinuous unit has been identified. This unit behaves as an aquitard and causes a perched groundwater to temporary flow within the upper medium, close to the surface. This perched groundwater flows out along several structurally controlled depressions, and then several high‐altitude temporary springs can be observed during recharge, together with several perennial basal (i.e., low altitude) springs, caused by the compartmentalisation of the system because of high‐angle tectonic discontinuities.     

Attenuation of compressional waves in peridotite measured as a function of temperature at 200 MPa

A technique has been developed to determine attenuation in rocks at high temperature using a gas-media, high-pressure apparatus. A pulse transmission technique and a spectral ratio method are used to study compressional seismic properties of rocks. Seismic waves are transmitted to and from the sample through buffer rods of mullite. The effect of seismic wave reflections within the sample assembly are cancelled out by taking ratios of the spectra measured at different temperatures. In order to obtain good signal-to-noise ratio for resolving the attenuation at high pressure and temperature, special care is taken in the sample assembly and the ultrasonic coupling between the sample, buffer rods and transducers. A very tight connection of the sample-buffer rod-transducer is essential for obtaining high frequency signals (>300 kHz) at high temperature. A small mass is attached to each outside end of the transducer to drive low frequency signals (<250 kHz) into the sample. Before attenuation measurements, the sample and the buffer rods are tightly compacted in a platinum tube at high pressure and room temperature to ensure pressure seal of the sample assembly. The frequency range of measurement covers 50 to 450 kHz for the sample. Attenuation is very small in the buffer rod compared to the sample for the entire temperature range of the study. Because of the small attenuation, a wide frequency band of 50 kHz to 3.2 MHz can be covered for investigating the attenuation in the buffer rod. The technique has been used to measure attenuation at high confining pressure, and temperatures including sub- and hyper-solidus of upper mantle rocks. Therefore, effects of partial melting on attenuation can be studied.The method is applied to the attenuation measurement in a peridotite as a function of temperature to 1225°C at 200 MPa confining pressure. At high temperature, signal amplitude decays more rapidly at high frequency than at low frequency, from which attenuation (andQ) can be determined using a spectral ratio method. No frequency dependence ofQ is resolved for both the sample and the buffer rod over the entire temperature and frequency ranges of the measurement. The results show thatQ decreases rapidly with increasing temperature even in the temperature range below the solidus of peridotites. Such temperature sensitivity ofQ is probably more useful to probe thermal structure in the upper mantle than that of conductivity at temperatures below the solidus. The results in this study are compared with available seismic velocity, electrical conductivity and solidus data for peridotites, suggesting that there is no discontinuous change in both mechanical and electrical properties of peridotites at the solidus temperature. Even at hypersolidus temperatures, it appears that velocity drops and conductivity increases continuously (not abruptly) with increasing melt fraction. This implies that mechanical and electrical properties of the upper mantle will gradually change at the boundary where the geotherm crosses the solidus.     

The longevity of subcontinental lithospheric mantle beneath Jiangsu-Anhui Region

The basalt-borne peridotite xenoliths from Jiangsu-Anhui provinces were analyzed for whole rock Os isotopic compositions in two laboratories of USTC, China and CRPG, France, respectively. The¹⁸⁷Os/¹⁸⁸Os ratio of the sample set ranges from 0.119 to 0.129 (25 samples, USTC) and from 0.117 to 0.131 (17 samples, CRPG). The Os isotopic compositions of most samples are less than 0.129 and depleted relatively to the primitive mantle, showing a good correlation with the major element compositions. With the¹⁸⁷Os/¹⁸⁸Os-Al₂O₃ alumichron, the samples yield a model age of 2.5 ± 0.1 Ga (data of USTC) and 1.9 ± 0.1 Ga (data of CRPG), late Archean to early Pro-terozoic. The two samples with the lowest¹⁸⁷Os/¹⁸⁸Os ratio (0.119 and 0.117) have the T_RD (Re depleted age) of 1.1 Ga (USTC) and 1.4 Ga (CRPG), mid-Proterozoic. The Os isotope model age shows that the peridotite xenoliths from Cenozoic alkali basalt in Jiangsu-Anhui provinces have an old formation age (early- to mid- Proterozoic). They are not newly produced mantle after the Phanerozoic replacement of the lithosphere mantle, but residual fractions of Proterozoic mantle.     

高温高压下花岗岩、玄武岩和辉橄岩电导率的变化特征

通过在高压(1.0-2.5GPa)和高温(53-1173K)条件下,取得花岗岩、玄武岩和辉橄岩三种岩石的一些电导率实验结果.讨论了这几种岩石电导率随温度的变化趋势,结果表明:电导率随温度升高而显著变化,在温度为53-1173K的范围内,电导率发生了3-5个量级的变化,这种变化可能同岩石的部分熔融过程有关.