松辽盆地东南缘六台地区下白垩统营城组二段砾岩沉积特征及成因模型

松辽盆地东南缘六台地区营城组二段发育一套冲积扇砾岩层。根据砾岩成因不同分为泥石流砾岩、河道砾岩和漫流砾岩等沉积类型,其中泥石流砾岩最为发育。通过研究泥石流砾岩的成分、结构成熟度和粒度分布特征,并运用经验公式最终判断其为再沉积的水上泥石流砾岩。河道砾岩和漫流砾岩沉积类型在本区保存较少,或许曾经在单个旋回中非常发育,但是被下个旋回猛烈的泥石流所改造。河道砾岩和漫流砾岩中层理的收敛方向及硅化木走向均表明本区古水流方向为近北西—东南向。根据古水流向等信息判断出本区砾岩的物源来自北西方向的北山,并在此基础上建立了本区砾岩冲积扇成因模型。     

Architecture and morphodynamics of a 1·6 Ga fluvial sandstone: Ellice Formation of Elu Basin,Arctic Canada

Precambrian fluvial deposits have been traditionally described as architecturally simple, forming shallow and wide braidplains with sheet‐like geometry. The varied architecture and morphodynamics of the 1·6 Ga Ellice Formation of Elu Basin, Nunavut, Canada, are examined from detailed studies of section and planform exposures along coastal platforms and stepped cliffs. The Ellice Formation overlies older Proterozoic sandstones and Archean crystalline rocks, recording sedimentation in fluvial, aeolian, coastal and nearshore‐marine environments. The fluvial deposits display palaeoflow towards the west/north‐west, while overlying shallow‐marine deposits record transgression towards the east/south‐east. The Ellice Formation displays dispersed palaeoflow at its base, and also at higher stratigraphic levels, where fluvial and aeolian deposits are associated. Elsewhere, mainly unimodal palaeoflow points to extensive low‐sinuosity fluvial deposition. Within the terrestrial deposits, fluvial, fluvial–aeolian and coastal architectural elements are recognized. Fluvial elements comprise cross‐bedded sandstone and minor conglomerate, exhibiting an overall fining‐upward trend with associated decrease in preservation, dimension and amalgamation of channel bodies. These motifs are interpreted to portray a shift in depositional environment from proximal trunk rivers to distal alluvial plains. Low‐sinuosity fluvial elements are the most common, and include major channel bodies, elongate side bars and mid‐channel bars with well‐developed scroll topography. High‐sinuosity channel‐bar complexes exhibit upbar‐flow rotation and yield evidence of bar expansion coupled with rotation and translation. Fluvial–aeolian elements are composed of aeolian dunes juxtaposed with isolated channel bodies and bank‐attached bars. Minor mixed fluvial–aeolian sheets record local deposition in unconfined settings (possibly floodbasins) or inter‐distributary highlands. Finally, coastal elements comprise small deltaic complexes composed of sand‐rich distributary‐channel bodies feeding heterolithic mouth bars. Overall, the sedimentary record of the Ellice Formation demonstrates an example from the Precambrian where alluvium was locally characterized by a higher geomorphic variability than previously recognized.     

安哥拉深水水道地质知识库建立及应用

利用浅层(上新统)三维高频地震资料的剖面、切片和属性信息,对安哥拉陆坡区深水水道特征和定量关系进行研究,在复合水道和单一水道两个层次上建立了安哥拉地区浊积水道定量化地质知识库.研究结果表明:研究区单一水道活动方式类似于曲流河点坝模式,即单一水道仅沿侧向(垂直于古流向)整体迁移,不存在整体“下游扫动”分量,且在平面上其侧积复合体呈“同心半环状”,单一水道的砂体以垂向加积方式充填在轴部,厚度向边部减薄;单一水道的宽度与深度、弯曲弧长与弯曲度之间存在较好的正相关性;复合水道样式按照内部单一水道的活动方式分为(Ⅰ)侧向迁移、(Ⅱ)斜列迁移和(Ⅲ)摆动迁移三类模式,且(Ⅰ)类主要发育在高弯曲段(弯曲度>1.3),Ⅱ类和Ⅲ类主要发育在低弯曲段(1<弯曲度≤1.3);该地质知识库成功应用到实际三维地质建模中,具有推广价值.本文研究不仅可以完善深水水道定量分布模式,而且可以有效降低此类油田开发风险,具有理论和实际意义.     

Pollutant transport in a shallow unconfined aquifer in Perry,Ohio

The groundwater system in northern Perry Township in Lake County, Ohio, is a shallow, unconfined aquifer consisting of periglacial lake beach deposits and less permeable lacustrine plain deposits. Groundwater flow is generally toward Lake Erie from south to north and is controlled by the top of the Ashtabula Till, but strong, local variations are caused by northward flowing streams During the study period, water levels in most wells exhibited a seasonal fluctuation of less than 0 3 m from their mean values. The areal distributions of chloride and nitrate concentrations indicate that road salt runoff easily infiltrates the aquifer and that nitrate may be sourced from fertilizer application. Ground-water flow and solute transport models indicate that in excess of 27 years are required to obtain chemical steady-state under hydrologic steady-state conditions. The simulations also demonstrate that nitrate loading must occur in more than one cultivated field in order to obtain the observed wide-spread nitrate distribution.     

Conditioning Channel Meanders to Well Observations

Assessment of uncertainty in the performance of fluvial reservoirs often requires the ability to generate realizations of channel sands that are conditional to well observations. For channels with low sinuosity this problem has been effectively solved. When the sinuosity is large, however, the standard stochastic models for fluvial reservoirs are not valid, because the deviation of the channel from a principal direction line is multivalued. In this paper, I show how the method of randomized maximum likelihood can be used to generate conditional realizations of channels with large sinuosity. In one example, a Gaussian random field model is used to generate an unconditional realization of a channel with large sinuosity, and this realization is then conditioned to well observations. Channels generated in the second approach are less realistic, but may be sufficient for modeling reservoir connectivity in a realistic way. In the second example, an unconditional realization of a channel is generated by a complex geologic model with random forcing. It is then adjusted in a meaningful way to honor well observations. The key feature in the solution is the use of channel direction instead of channel deviation as the characteristic random function describing the geometry of the channel.     

A simple analytical method for calculating temperature perturbations in a basin caused by the flow of water through thin, shallow-dipping aquifers

Fluid flow in sedimentary basins can be driven by a variety of mechanisms. Commonly, flow is localized in relatively thin aquifers or structures and often these permeable units may be approximated by a series of straight planar segments with shallow dip. A simple formula is derived that describes temperature perturbations in a straight aquifer segment with shallow dip. The temperature is determined everywhere along the segment if the flow rate and temperature at one point is known. “Daisy chaining” the solutions allows easy calculation of the temperature perturbation in a basin caused by fluid flow through a shallow-dipping network of linear fault and aquifer segments. The approach may find many applications but is here illustrated the a number of examples related to the origin of Mississippi Valley-type PbZn deposits. The cases considered emphasize the “salinity problem” encountered by models that hypothesize these deposits formed as the result of cross-basin hydrological flow.     

FLUVIATILE RUN-OFF AS A FACTOR IN THE PRIMARY DISPERSAL OF SUBMARINE GRAVELS IN FOVEAUX STRAIT, NEW ZEALAND

Sand is being deposited in a meandering estuary separating Sapelo and Blackbeard Islands, Georgia, in the channel of the estuary and on two point bars associated with meanders. Sand is being eroded by the meandering channel from slightly lithified Pleistocene and unconsolidated Holocene strandline deposits, and is being redeposited by the ebb tidal currents. The estuary-channel deposits are coarse grained and their grain-size decreases down ebb current from the source outcrops. The point bars are elongated in the direction of the ebb current, and increase in grain-size from their crests downward as they grade into the channel deposits. Festoon cross-bedding and ripple marks on the point bars record the ebb direction, while elongate plant fragments are preferentially oriented normal to the bar elongation (current). Horizontally stratified muds and muddy sands are being deposited behind the bars, and contain a rich fauna (primarily annelids, arthropods, and molluscs). However, the fauna is represented in the deposits more by burrows and disturbed stratification than by preserved organisms. The sands of the bars and channel are biologically less productive, but the bioclastic content of the sediment is high.     

山东福山铜矿岩溶裂隙水充水矿井涌水量预测

福山铜矿位于山东省烟台市,围岩主要是大理岩,岩溶裂隙水为矿床直接充水水源。在分析研究区水文地质条件、岩溶发育特征和地下水流态的基础上,建立了地下水三维渗流模型,模型考虑了地下水在三个主渗流方向上的各向异性,将疏干巷道概化为排水沟,针对金属矿床开采水位降深大,边界流量随着降深的增大而增加,采用通用水头边界,随着降深的变化边界流入量依据水位值计算得到。利用群孔抽水试验资料和长期观测资料对模型进行识别和验证,最终对矿井疏干排水量和不同年份的正常涌水量进行预报,模拟结果为-80 m、-200 m、-300 m、-400 m和-450 m水平平水年正常涌水量分别为7 500 m3/d、14 060 m3/d、28 070 m3/d、37 200 m3/d和41 600 m3/d。从岩溶发育特征和地下水流动特征看,在这类岩溶地区建立地下水三维渗流模型是可行的。      

Fluvial sedimentation in the lower carboniferous of Clew Bay,County Mayo,Ireland

A succession of about 300 m of fluvial sediments from the Lower Carboniferous of northwest Ireland is described and interpreted. A lower, mainly red, formation contains fluvial channel deposits dominated by flat laminated sandstone. These are separated by interbedded sandstones and mudrocks with local caliche horizons and abundant mudcracks interpreted as levee and flood basin deposits. An upper, mainly non-red, formation contains fluvial channel deposits with common trough cross-stratification and epsilon cross-stratification also separated by interbedded sandstones and mudrocks. Evidence of desiccation is less common in the uppermost beds which pass transitionally upwards into marine sediments.The change in fluvial channel style is interpreted as due to increasing sinuosity and permanence of flow which may have been partly temporally and partly spatially controlled. The predominance of coarse sediments is thought to be largely controlled by limited subsidence. The Lower Carboniferous transgression was the major overall control of alluviation.     

Numerical analysis of the hydrogeologic controls in a layered coastal aquifer system, Oahu, Hawaii, USA

 The coastal aquifer system of southern Oahu, Hawaii, USA, consists of highly permeable volcanic aquifers overlain by weathered volcanic rocks and interbedded marine and terrestrial sediments of both high and low permeability. The weathered volcanic rocks and sediments are collectively known as caprock, because they impede the free discharge of groundwater from the underlying volcanic aquifers. A cross-sectional groundwater flow and transport model was used to evaluate the hydrogeologic controls on the regional flow system in southwestern Oahu. Controls considered were: (a) overall caprock hydraulic conductivity; and (b) stratigraphic variations of hydraulic conductivity in the caprock. Within the caprock, variations in hydraulic conductivity, caused by stratigraphy or discontinuities of the stratigraphic units, are a major control on the direction of groundwater flow and the distribution of water levels and salinity. Results of cross-sectional modeling confirm the general groundwater flow pattern that would be expected in a layered coastal system. Groundwater flow is: (a) predominantly upward in the low-permeability sedimentary units; and (b) predominantly horizontal in the high-permeability sedimentary units. Received, October 1996 Revised, August 1997 Accepted, September 1997     

Effects of rainfall,geomorphological and geometrical variables on vulnerability of the lower Mississippi River levee system to slump slides

This study investigated the importance of rainfall and various geomorphological and geometrical factors to the vulnerability of earthen levees to slump slides. The study was performed using a database including 34 slump slides that occurred in the lower Mississippi River levee system from 2008 to 2009. The impact of rainfall within the six months prior to slide occurrence was studied for 23 slides for which an accurate occurrence date was available. Several variables were used to develop a logistic regression model to predict the probability of slump slide occurrence. The proposed model was verified for both slide and non-slide cases. The regression analysis depicts the impact of channel width, river sinuosity index, riverbank erosion, channel shape condition and distance to river. Excluding the sinuosity index, the impact of the other independent variables examined was found to be significant. Occurrence of riverbank erosion around the slide locations was the most significant predictor factor. A channel width of less than 1000?m was ranked as the second most significant variable. The proposed model can aid in locating high-risk areas on levees in order to take prompt protective measures, increase monitoring efforts and enable early response under emergency conditions.     

Architecture of vertically stacked fluvial deposits,Atane Formation,Cretaceous, Nuussuaq,central West Greenland

Excellent exposures of thick, multistorey, fluvial deposits from the deltaic Atane Formation on south‐east Nuussuaq, central West Greenland, show the architecture of up to 100 m thick continuously aggrading fluvial depositional complexes. The succession comprises vertically stacked channel belt sandstones separated by thin floodplain deposits, with little to no incision between storeys. Architectural elements and palaeocurrent patterns of channel deposits indicate deposition in large, relatively stable, low‐sinuosity rivers, probably located within an incised valley. Gradual transitions from channel to floodplain deposits accompanied by a gradual change from floodplain to spillover sand suggest avulsion on the floodplain as a possible mechanism for the vertically alternating channel and floodplain deposits. Despite its relative proximity to contemporaneous sea‐level (ca 35 km upstream from the palaeo‐shoreline) the depositional complex is entirely non‐marine. The aggrading nature of the deposits suggests a continuously rising base level coupled with a high and steady sediment supply. Vertical alternations between floodplain and channel deposits may be forced by subtle interruptions in this balance or autocyclic mechanisms on the floodplain. This study provides an example of aggrading lowstand/non‐marine transgressive systems tract deposits.     

Facies and cyclicity of the Late Permian Bainmedart Coal Measures in the Northern Prince Charles Mountains, MacRobertson Land, Antarctica

The Late Permian Bainmedart Coal Measures form part of the Permo-Triassic Amery Group, which crops out in the Beaver Lake area of the Northern Prince Charles Mountains, MacRobertson Land, Antarctica. The exposed strata are believed to have formed in graben or half-graben sub-basins on the western edge of the Lambert Graben, a major failed rift system. Sedimentological analysis has revealed that these rocks formed in alluvial environments in which swiftly flowing rivers of low sinuosity (represented by Facies A1 and A2) flowed northward down the axis of the basin, and were associated with waterlogged floodbasin and peat-forming wetlands (Facies B1-B4). A third Facies Association (comprising Facies C1-C3), interpreted as the deposits of lake floor and delta environments, is exclusively developed within a distinctive, fine-grained interval here named the Dragon's Teeth Member. The proportion of Association B facies within the succession increases markedly above the level of the Dragon's Teeth Member (at about 300 m above the base of the formation). Flat, low-angle and undulatory bedding structures preserved within channel deposits are suggestive of sediment deposition in flow conditions which were often critical or supercritical. Presence of massive and chaotic intervals of sandstone further implies some deposition from high-concentration aqueous flows. Alluvial channel bodies show evidence of incision into underlying substrates, both during initiation and at later stages in channel belt construction. The lack of interfingering between channel deposits and coals suggests that thick peats formed only in areas and at times of minimal clastic sediment supply. Analysis of well-developed cyclicity within the coal measures suggests that the dominant control on sequence architecture was climatic, related to precessional Milankovitch fluctuations of c. 19-kyr periodicity. Cycles began abruptly with the deposition of coarse-grained material in high-energy alluvial channels, which contracted with time in response to changes in water supply (rainfall). Upper parts of cycles are dominated by finer-grained sediments and then coal, indicative of progressively reduced coarse sediment input. Tectonic processes overprinted this pattern at least once during the period of sediment accumulation, to form the Dragon's Teeth Member.     

基于离散裂隙网络模型的裂隙水渗流计算

离散裂隙网络模型(Discrete Fracture Network（DFN）)是研究裂隙水渗流最为有效的手段之一。文章根据裂隙几何参数和水力参数的统计分布,利用Monte Carlo随机模拟技术生成二维裂隙网络,基于图论无向图的邻接矩阵判断裂隙网络的连通,利用递归算法提取出裂隙网络的主干网或优势流路径。基于立方定律和渗流连续性方程,利用数值解析法建立了二维裂隙网络渗流模型,分析不同边界条件下裂隙网络中的流体流动。结果表明,该方法可以模拟区域宏观水力梯度和边界条件下,裂隙网络水力梯度方向总的流量,以及节点的水位、节点间的流量和流动方向的变化特征,为区域岩溶裂隙水渗流计算提供了一种实用、可行的方法。      

Sedimentological synthesis of permian fluviatile sediments of East Bokaro basin,Bihar, India

The early Permian Karharbari and Barakar formations of East Bokaro basin comprise the following lithofacies:Lithofacies A, consisting of monomictic cobble- and pebble-conglomerate including pebbly sandstone, with faint crossbeds; deposited mainly by high-velocity aqueous currents as channel-lag deposit or longitudinal bars.Lithofacies B, coarse to medium sandstone, profusely crossbedded; interpreted as channel facies formed by downcurrent migration of sand bars in low-sinuosity streams.Lithofacies C, mainly fine sandstone with interbedded siltstone, characterised by small-scale ripple-lamination; formed in a low-energy environment such as swale-fill and/or overbank deposits.Lithofacies D, including carbonaceous shale and coal, with lack-of-current structures, indicating quiet-water deposition; interpreted as backswamp and lacustrine deposits.The overall context of the Karharbari and Barakar assemblage with relative abundance of pebbly coarse sandstone in the former and fine clastics in the latter, the presence of fining-upward cycles, widespread development of tabular and trough crossbedding and sample to sample variation of foreset azimuths, all suggest a generally alluvial environment. Analysis of crossbedding dip azimuth and dimensional fabric suggest that the sediment milieu in either case consisted of streams flowing persistently from the south-southeast to north-northwest direction. It is inferred that the unidirectional system of streams flowing across the East Bokaro basin changes systematically in channel sinuosity through time.     

An integrative geological and geophysical approach to characterize a superficial deltaic aquifer in the Camargue plain,France

Deltaic aquifers are complex due to the important heterogeneity of their structure and their hydrogeological functioning. Auger drilling provides localized, but very robust geological and hydrogeological information, while geophysical surveys can provide integrated subsurface information. An effective, easy-to-use and low-cost methodology combining geological/hydrogeological information from Auger drillings and the results from three geophysical techniques (Electromagnetic mapping, Electrical Sounding and Electrical Resistivity Tomography) is being developed to characterize the structure of a typical Mediterranean deltaic aquifer. A first hypothesis about hydrodynamic properties of the aquifer is also obtained. The study area is located in the Rhone delta (Middle Camargue/southern France). Integration of geophysical and geological techniques allowed identifying the presence and lateral extension of the Saint-Ferréol paleochannel, the vertical contact between lagoonal–fluvial deposits and the marine clayed silt that separate the superficial aquifer from the deeper aquifer. Likewise, high north–south heterogeneity and east–west homogeneity were highlighted in the study area. Presence of clay in sandy deposits in the low areas implies changes in lateral hydraulic permeability. This fact, jointed to the low hydraulic gradient, suggests a slow groundwater flow in the local system. The Rhone delta presents a typical configuration of a Mediterranean deltaic aquifer, thus this methodological approach can be used for similar deltaic Mediterranean systems.     

Origin,evolution and anatomy of silt‐prone submarine external levées

Submarine external levées are constructional features that develop outside slope channel systems, and are a volumetrically significant component of continental margins. However, detailed observations of their process sedimentology and depositional architecture are rare. Extensive exposures of external levées at multiple stratigraphic intervals and well‐constrained palaeogeographic positions in the Fort Brown Formation, Karoo Basin, South Africa, have been calibrated with research boreholes. This integrated data set permits their origin, evolution and anatomy to be considered, including high‐resolution analysis of sedimentary facies distribution and characterization of depositional sub‐environments. An idealized model of the stratigraphic evolution and depositional architecture of external levées is presented, and variations can be attributed to allogenic (for example, sediment supply) and autogenic (for example, channel migration) factors. Initiation of external levée construction is commonly marked by deposition of a basal sand‐rich facies with sedimentary structures indicating rapid deposition from unconfined flows. These deposits are interpreted as frontal lobes. Propagation of the parent channel, and resultant flow confinement, lead to partial erosion of the frontal lobe and development of constructional relief (levées) by flow overspill and flow stripping. Overall fining‐upwards and thinning‐upwards profiles reflect increased flow confinement and/or waning flow magnitude through time. Identification of a hierarchy of levée elements is not possible due to the absence of internal bounding surfaces or sharp facies changes. The down‐slope taper in levée height and increasing channel sinuosity results in increasing numbers of crevasse lobe deposits, and is reflected by the increased occurrences of channel avulsion events down‐dip. External levées from the Fort Brown Formation are silt‐rich; however their stratigraphic evolution and the distribution of many components (such as sediment waves and crevasse lobe) share commonalities with mud‐rich external levées. This unique integrated data set has permitted the first high‐resolution characterization of external submarine levée systems.     

Old red sandstone sedimentation—an example from the brownstones (highest lower old red sandstone) of south central wales

The Brownstones form the highest Lower Old Red Sandstone in South Wales and the Welsh Borderlands. Sections from the Brecon Beacons of Central South Wales consist of laterally extensive sheets of interbedded sandstone and siltstone. Facies sequence A consists of parallel laminated sheet sandstones and siltstones and is interpreted as a sandy sheetflood and distal muddy floodflat association. Facies sequence B comprises sheet sandstones composed of multistorey channel fills, small calcrete-clast filled channels and massive siltstones with thin interbedded sandstones. This sequence is interpreted as low sinuosity channel deposits merging laterally and downslope into a muddy flood-basin, with calcrete clasts infilling intrabasinal channel systems. Facies sequence C consists of multistorey sandstones and is interpreted as a proximal low sinuosity channel system. The Brownstones of the Brecon Beacons formed on an extensive alluvial plain with low sinuosity sand-bed channels merging downslope into sheetfloods and muddy floodflats, in a system broadly analogous to that of the Eyre Basin of South Australia.