Integrated application of 2D resistivity and electromagnetic methods to investigate a metallic-sulfide deposit in Soap Gulch,Montana. A case study

Geoelectrical methods involving electrical resistivity tomography (ERT), self-potential (SP), frequency domain electromagnetic (FDEM), and very low frequency (VLF) methods have been used to provide valuable information in locating a known sulfide ore body in Soap Gulch, Montana. The study develops basis of comparison for the geophysical techniques employed. Ranges of resistivity along the area have been established using interpreted ERT which can help to understand the subsurface distribution of sulfides in the area. A sulfide body was delineated from the survey area corresponding to anomalously low resistivity values on the ERT section, negative SP, and high apparent current density zone in VLF. Depth to the localized ore zone ranges approximately from 10 to 20 m. FDEM data reflect the conductivity distribution of the shallow subsurface (less than 6 m deep); hence, the delineated sulfide zone had minimal contribution to FDEM measurements. The results of the study show that SP, VLF, and ERT methods provide significant information in localizing ore bodies. The survey revealed that the resistivity values obtained from ERT profile corroborate the FDEM, SP, and VLF from the area.     

Geophysical,geochemical and hydrological analyses of water-resource vulnerability to salinization: case of the Uburu-Okposi salt lakes and environs,southeast Nigeria

Until this study, the location and depth of the saline units in Uburu-Okposi salt lake areas and environs have been unknown. This study aimed at delineating the saline lithofacies and dispersal configurations to water bodies, using electrical geophysical methods such as constant separation traversing (CST) and vertical electrical sounding (VES). Results showed weathered zones that represent aquifers mostly at the fourth geoelectric layer: between upper layered aquitards and underlying aquitards at depths 30–140 m. Lateral distribution of resistivity variance was defined by the CST, whereas the VES tool, targeted at low-resistivity zones, detected isolated saline units with less than 10 ohm-m at depths generally >78 m. The saline lithofacies were suspected to link freshwater zones via shear zones, which steer saline water towards the salt lakes and influence the vulnerability of groundwater to salinization. The level of salinization was verified by water sampling and analysis, and results showed general alkaline water type with a mean pH of 7.66. Water pollution was indicated: mean total dissolved solids (TDS) 550 mg/l, electrical conductivity (EC) 510 μS/cm, salinity 1.1‰, Cl^? 200 mg/l, N0₃ ^?35.5 mg/l, Na⁺ 19.6 mg/l and Ca²⁺ 79.3 mg/l. The salinity is controlled by NaCl salt, as deduced from correlation analysis using the software package Statistical Product for Service Solutions (SPSS). Generally, concentrations of dissolved ions in the water of the area are enhanced via mechanisms such as evaporation, dissociation of salts, precipitation run off and leaching of dissolved rock minerals.     

Geochemical and isotopic constraints on the interaction between saline lakes and groundwater in southeast Australia

Major ion and stable isotope geochemistry allow groundwater/surface-water interaction associated with saline to hypersaline lakes from the Willaura region of Australia to be understood. Ephemeral lakes lie above the water table and locally contain saline water (total dissolved solids, TDS, contents up to 119,000 mg/L). Saline lakes that lack halite crusts and which have Cl/Br ratios similar to local surface water and groundwater are throughflow lakes with high relative rates of groundwater outflows. Permanent hypersaline lakes contain brines with TDS contents of up to 280,000 mg/L and low Cl/Br ratios due to the formation of halite in evaporite crusts. These lakes are throughflow lakes with relatively low throughflow rates relative to evaporation or terminal discharge lakes. Variations in stable isotope and major ion geochemistry show that the hypersaline lakes undergo seasonal cycles of mineral dissolution and precipitation driven by the influx of surface water and evaporation. Despite the generation of highly saline brines in these lakes, leakage from the adjacent ephemeral lakes or saline throughflow lakes that lack evaporite crusts is mainly responsible for the high salinity of shallow groundwater in this region.     

Assessment of integrated electrical resistivity data on complex aquifer structures in NE Nuba Mountains – Sudan

Two geophysical techniques were integrated to map the groundwater aquifers on complex geological settings, in the crystalline basement terrain in northeast Nuba Mountains. The water flow is structurally controlled by the northwest–southeast extensional faults as one of several in-situ deformational patterns that are attributed to the collision of the Pan-African oceanic assemblage of the Nubian shield against the pre-Pan African continental crust to the west. The structural lineaments and drainage systems have been enhanced by the remote sensing technique. The geophysical techniques used are: vertical electrical soundings (VES) and electrical resistivity tomography (ERT), in addition to hydraulic conductivity measurements. These measurements were designed to overlap in order to improve the producibility of the geophysical data and to provide a better interpretation of the hydrogeological setting of the aquifer complex structure. Smooth and Block inversion schemes were attempted for the observed ERT data to study their reliability in mapping the different geometries in the complex subsurface. The VES data was conducted where ERT survey was not accessible, and inverted smoothly and merged with the ERT in the 3D resistivity grid. The hydraulic conductivity was measured for 42 water samples collected from the distributed dug wells in the study area; where extremely high saline zones were recorded and have been compared to the resistivity values in the 3D model.     

Marine electrical resistivity imaging of submarine groundwater discharge: sensitivity analysis and application in Waquoit Bay, Massachusetts, USA

Electrical resistivity imaging has been used in coastal settings to characterize fresh submarine groundwater discharge and the position of the freshwater/salt-water interface because of the relation of bulk electrical conductivity to pore-fluid conductivity, which in turn is a function of salinity. Interpretation of tomograms for hydrologic processes is complicated by inversion artifacts, uncertainty associated with survey geometry limitations, measurement errors, and choice of regularization method. Variation of seawater over tidal cycles poses unique challenges for inversion. The capabilities and limitations of resistivity imaging are presented for characterizing the distribution of freshwater and saltwater beneath a beach. The experimental results provide new insight into fresh submarine groundwater discharge at Waquoit Bay National Estuarine Research Reserve, East Falmouth, Massachusetts (USA). Tomograms from the experimental data indicate that fresh submarine groundwater discharge may shut down at high tide, whereas temperature data indicate that the discharge continues throughout the tidal cycle. Sensitivity analysis and synthetic modeling provide insight into resolving power in the presence of a time-varying saline water layer. In general, vertical electrodes and cross-hole measurements improve the inversion results regardless of the tidal level, whereas the resolution of surface arrays is more sensitive to time-varying saline water layer.     

Determination of potential mine water discharge zones in crystalline rocks at Rozna,Czech Republic

The Rozna Mine is one of the last active uranium mines in Europe. When the mine is closed and flooded, the natural groundwater flow pattern will be partly restored. Re-established groundwater flow system will be associated with an increase of groundwater discharge into draining rivers and streams. Since the groundwater inflows to streams can be contaminated by the mine water, the groundwater drainage characteristic of fractured aquifer should be carefully identified. Several methods of groundwater discharge zones identification were used including morphological analysis, thermometry, and electrical conductivity (EC) measurements. Stream temperatures and EC at more than 700 points in the area covering about 85 km² were measured. The measurements were performed during winter period, when stream discharges were low and there was a maximum temperature contrast. There was a frequent presence of preferential discharge zones with resulting anomalous temperatures and electric conductivity values of stream water. The results show evident correlation of discharge zones with surface morphology and geological settings. Just like the aquifer discharge characteristics, the aquifer is strongly heterogeneous. The thermometry supported by measurement of EC proved to be a useful tool for large-scale investigation of groundwater flow and drainage in fractured aquifers.     

Classification and delineation of groundwater–lake interactions in the Nebraska Sand Hills (USA) using electrical resistivity patterns

Lake?Cgroundwater interactions exhibit a complex three-dimensional (3D) structure that is seldom studied. The utility of waterborne electrical resistivity (ER) surveys is explored for characterization of 3D groundwater flow and solute transport patterns for three lakes in the Nebraska Sand Hills, USA. Waterborne ER surveys, using contrasts between lake and groundwater solutes as natural tracers, are useful for inferring 3D patterns of groundwater flow and solute transport as well as classifying groundwater?Clake interactions. Three unique groundwater flow systems are interpreted under each lake from dense networks of two-dimensional (2D) waterborne ER surveys. A lateral transition from high to low ER values beneath the saline Wilson Lake expresses its flow-through regime, where groundwater salinity indicates changes from groundwater inflow to outflow. Alkali Lake ER profiles reveal a prevalent ER increase with depth over the lakebed area that is characteristic of groundwater discharge lakes. ER profiles beneath Gimlet Lake are the most resistive and indicate pockets of high ER related to fresh groundwater discharge into the lake, supporting a flow-through regime with a short flushing time. These ER patterns correctly classify groundwater?Clake interactions and provide high spatial resolution of mixing patterns for systems with varying water salinity.     

Comparison of DRASTIC and DC resistivity modeling for assessing aquifer vulnerability in the central Nile Delta,Egypt

DRASTIC indexing and integrated electrical conductivity (IEC) modeling are approaches for assessing aquifer vulnerability to surface pollution. DRASTIC indexing is more common, but IEC modeling is faster and more cost-effective because it requires less data and fewer processing steps. This study aimed to compare DRASTIC indexing with IEC modeling to determine whether the latter is sufficient on its own. Both approaches are utilized to determine zones vulnerable to groundwater pollution in the Nile Delta. Hence, assessing the nature and degree of risk are important for realizing effective measures toward damage minimization. For DRASTIC indexing, hydrogeological factors such as depth to aquifer, recharge rate, aquifer media, soil permeability, topography, impact of the vadose zone, and hydraulic conductivity were combined in a geographical information system environment for assessing the aquifer vulnerability. For IEC modeling, DC resistivity data were collected from 36 surface sounding points to cover the entire area and used to estimate the IEC index. Additionally, the vulnerable zones identified by both approaches were tested using a local-scale resistivity survey in the form of 1D and 2D resistivity imaging to determine the permeable pathways in the vadose zone. A correlation of 0.82 was obtained between the DRASTIC indexing and IEC modeling results. For additional benefit, the obtained DRASTIC and IEC models were used together to develop a vulnerability map. This map showed a very high vulnerability zone, a high-vulnerability zone, and moderate- and low-vulnerability zones constituting 19.89, 41, 27, and 12%, respectively, of the study area. Identifying where groundwater is more vulnerable to pollution enables more effective protection and management of groundwater resources in vulnerable areas.     

Using helicopter electromagnetic data to predict groundwater quality in fractured crystalline bedrock in a semi-arid region, Northeast Brazil

Geostatistical modeling, using airborne and borehole electromagnetic data, was used to estimate electrical conductivity in groundwater within fractured paragneisses and migmatites in a semi-arid climate in northeastern Brazil. Despite the geologic heterogeneity of crystalline aquifers, the use of high resolution helicopter electromagnetic (HEM) data enabled the characterization of groundwater electrical conductivity where data from drilled wells were insufficient. The tacit assumption is that HEM measurements can be used to relate rock electrical conductivity to groundwater electrical conductivity. In this study, the HEM data were used as an external drift variable in non-stationary estimation and stochastic simulation to identify the variability of groundwater electrical conductivity. Validation tests, comparing predicted values for groundwater conductivity with measurements in new wells, confirmed the success of these models in locating fresh groundwater sources in crystalline bedrock.     

Relationship between electrical conductivity, <Superscript>18</Superscript>O of water and NO<Subscript>3</Subscript> content in different streamflow stages

The Ballenera Creek has 160 km² being a small catchment in the Pampa Plain in Argentina. This area has been deeply modified by human action through agricultural activities. From 2013 to 2017, electrical conductivity, stable isotopes of water and nitrate concentration monitoring program were conducted. The sampling included weekly and bimonthly samples in two sites along the stream, several groundwater wells and monthly precipitation. Chemical and isotopic tracers are used to discriminate the streamflow components and to evaluate their incidence in the nitrate concentration. The easiest conceptual model for gaining streams contemplates two main elements: direct runoff and groundwater (baseflow and pre-event water). The direct runoff has the lowest electrical conductivity and ¹⁸O_w variable content. The baseflow component is characterized by the highest electrical conductivity and isotope composition quite constant. Finally, pre-event water has an intermediate electrical conductivity and isotopic content close to the rainfall-weighted average composition. The nitrate concentration obtained was in general related to the different stream stages and was a useful indicator to evaluate the fertilization in agricultural zones.     

Identification of groundwater potential zones within an area with various geomorphological units by using several field parameters and a GIS approach in Kulon Progo Regency, Java, Indonesia

A case study was conducted to find the groundwater potential zones in an area between the Serang and Bogowonto rivers, Kulon Progo Regency, Java, Indonesia. The objectives of this study were to delineate the groundwater potential zone based on a number of groundwater parameters that can be surveyed in the field and to incorporate the geomorphological conditions into these data. The geomorphology interpretation was conducted using the landform approach. This approach begins by preparing supporting data such as an Indonesian Topographic Map containing contour and land use data; a regional geology map containing lithology type and geology structures; and soil, climate, and hydrological data. The determination of the geomorphology unit was conducted manually by the visual interpretation of Digital Landsat ETM⁺ with some image interpretation keys. Four groundwater parameters were surveyed in the field: (a) depth to the water table, (b) water table fluctuation, (c) fluid electrical conductivity to represent groundwater quality, and (d) aquifer thickness. The groundwater potential zones were obtained by overlaying all the groundwater field parameters in terms of weighted overlay methods using the spatial analysis tool in ArcGIS 9.2. During the weighted overlay analysis, rankings were produced for each individual parameter of each groundwater field parameter, and weights were assigned based on the amount of influence they had (i.e., depth to the water table—30 %, water table fluctuation—20 %, aquifer thickness—30 %, and fluid conductivity—20 %). We then found the good, moderate, and poor zones in terms of groundwater potential, which had areas of 5.83, 4.53, and 2.36 km², respectively. Areas with good groundwater potential are located largely within sand dunes, beach ridges, beaches, and fluviomarine plain landforms, which are characterized by a shallow water table, low fluctuation, thick aquifer, and low EC value. Moderate groundwater zones are generally characterized by poor water quality (high EC value), which is found to some degree in the alluvial plain. The regions with poor groundwater potential are spread mainly across the landforms composed of igneous rock (thin aquifers), such as denudational hills, which act as run-off zones due to their steep slope.     

1:5万冲洪积扇含水层水质调查方法探讨

以豫北山前冲洪积扇含水层为研究对象,探讨1:5万冲洪积扇含水层水质调查方法。该方法由工作量预部署、野外调查和取样点布设3个阶段组成。工作量预部署阶段,以前期调查资料为基础,编制工作区地形地貌、潜在污染源、地下水流场和水化学类型演变图,并赋值叠加形成不同调查点密度分区的野外工作图,宏观控制调查工作量; 野外调查阶段,重视pH值、溶解氧、电导率和氧化还原电位的测定与质量控制,根据调查区块环境状况调整调查点密度,布点兼顾地下水点与非地下水点及不同深度水点间的比例; 取样点布设阶段,以地质环境对含水层进行分区,以不同深度水井地下水功能对含水层进行分层。利用调查点现场水化学参数,识别并圈定水质变异区,分别采用判断法和均布法布设水质变异区和水质正常演化区取样点。该方法可为类似地区开展高精度地下水水质或污染调查提供参考。     

Geochemical process regulating groundwater quality in a coastal region with complex contamination sources: Barka,Sultanate of Oman

An investigation was carried out to evaluate the geochemical processes regulating groundwater quality in a coastal region, Barka, Sultanate of Oman. The rapid urban developments in Barka cause depletion of groundwater quantity and deterioration of quality through excessive consumption and influx of pollutants from natural and anthropogenic activities. In this study, 111 groundwater samples were collected from 79 wells and analysed for pH, EC, DO, temperature, major ions, silica and nutrients. In Barka, water chemistry shows large variation in major ion concentrations and in electrical conductivity, and implies the influence of distinguished contamination sources and hydrogeochemical processes. The groundwater chemistry in Barka is principally regulated by saline sources, reverse ion exchange, anthropogenic pollutants and mineral dissolution/precipitation reactions. Due to ubiquitous pollutants and processes, groundwater samples were classified into two groups based on electrical conductivity. In group1, water chemistry is greatly influenced by mineral dissolution/precipitation process and lateral recharge from upstream region (Jabal Al-Akdar and Nakhal mountains). In group 2, the water chemistry is affected by saline water intrusion, sea spray, reverse ion exchange and anthropogenic pollutants. Besides, high nitrate concentrations, especially in group 2 samples, firm evidence for impact of anthropogenic activities on groundwater quality, and nitrate can be originated by the effluents recharge from surface contamination sources. Ionic ratios such as SO₄/Cl, alkalinity/Cl and total cation/Cl indicate that effluents recharged from septic tank, waste dumping sites and irrigation return flow induce dissolution of carbonate minerals, and enhances solute load in groundwater. The chemical constituents originating from saline water sources, reverse ion exchange and mineral dissolution are successfully differentiated using ionic delta, the difference between the actual concentration of each constituent and its theoretical concentration for a freshwater–seawater mix calculated from the chloride concentration of the sample, and proved that this approach is a promising tool to identify and differentiate the geochemical processes in coastal region. Hence, both regular geochemical methods and ionic delta ensured that groundwater quality in Barka is impaired by natural and human activities.     

应用低频电磁法在采矿废弃场地进行地电特征调查

采用低频电磁法对一个采矿废弃场进行了浅层地层特征调查,检测土壤和地下水污染程度,探测出地下水污染分布情况,确定了地下水流污染扩散的路径,并且探测出该场地地下埋藏物的位置;通过分析地层的电导率特性,确定了地球物理异常区。研究结果表明,根据地下水污染分布情况,由南往北方向可将研究区分成污染区、过渡区和非污染区。这些结果有助于及时调整该采矿废弃场的污染管理措施,并确定新的环境监测井位。研究结果表明,电磁法对地下导体敏感,能够探测出与地下水有关的物理性质差异,精度高,适合进行环境监测。     

Causality analysis of the groundwater response in a delta plain of the lower Nakdong River,Republic of Korea

The salinity of groundwater in an estuarine delta plain is sometimes related to the presence of an estuarine dam. To understand groundwater processes and salinity variation, time series data on the river water level, groundwater level, and groundwater electrical conductivity were collected for the Nakdong River in southeastern Republic of Korea. Sampling was undertaken upstream of the estuarine barrage system, which is opened and closed depending on upstream flow and seawater level. Comprehensive correlation analysis was performed between the groundwater and river water levels using bubble plots between groundwater electrical conductivity and the hydrological variables. Comparative analysis between the correlations and the field measurements of the hydrological variables indicated a negligible flux connection between the river and groundwater. Oscillatory pressure wave propagation from the river boundary explains the response patterns of the groundwater level. There were different response times for the rising and falling of the river water. Electrical conductivity in groundwater is not directly associated with that of the river except in one well close to the river boundary. The response patterns of groundwater electrical conductivity were explained by potential anthropogenic activity. Further transfer modeling results also indicate a spatial explanatory response pattern for the groundwater level. No spatial patterns in the models of electrical conductivity indicate that the hydrological processes are different with respect to the groundwater level and electrical conductivity.

     

Assessment of vulnerability zones for ground water pollution using GIS-DRASTIC-EC model: A field-based approach

Assessment of groundwater vulnerability to pollution is an essential pre-requisite for better planning of an area. We present the groundwater vulnerability assessment in parts of the Yamuna Nagar District, Haryana State, India in an area of about \(800 \hbox { km}^{2}\), considered to be a freshwater zone in the foothills of the Siwalik Hill Ranges. Such areas in the Lower Himalayas form good groundwater recharge zones, and should always be free from contamination. But, the administration has been trying to promote industrialization along these foothill zones without actually assessing the environmental consequences such activities may invite in the future. GIS-DRASTIC model has been used with field based data inputs for studying the vulnerability assessment. But, we find that inclusion electrical conductivity (EC) as a model parameter makes it more robust. Therefore, we rename it as GIS-DRASTIC-EC model. The model identifies three vulnerability zones such as low, moderate and high with an areal extent of 5%, 80% and 15%, respectively. On the basis of major chemical parameters alone, the groundwater in the foothill zones apparently looks safe, but analysis with the help of GIS-DRASTIC-EC model gives a better perspective of the groundwater quality in terms of identifying the vulnerable areas.     

Geoelectrical investigation of oil contaminated soils in former underground fuel base: Borne Sulinowo,NW Poland

The survey has been carried out in the area of 0.23 km² of the former military underground fuel base. The oil derivative products were observed in excavations and the laboratory tests confirmed the occurrence of hydrocarbons (>C12) in soils. The purpose of the survey was to determine the spatial extent of the contamination. The studied area is covered by postglacial sediments: sands, gravels and till. The first water table was observed at a depth of 10–12 m. The detailed electromagnetic measurements with Geonics EM31-MK2 conductivity meter were performed in the whole area of the former fuel base. Obtained results were elaborated statistically and the map of apparent electrical conductivity to a depth of 6 m was created. Many local low conductivity anomalies were observed. The measurements with Geonics EM34-3XL were performed along one A–A′ profile and 1D electromagnetic modelling along with this profile was calculated to obtain the electrical conductivity cross-section to a depth of 30 m. Two-dimensional electrical resistivity imaging measurements were carried out along the same profile and the resistivity cross-section to a depth of 20 m was performed. Both conducivity and resistivity cross-sections show anomalous zones. The zones correlate with oil contaminated zones very well.     

Dynamic freshwater–saline water interaction in the coastal zone of Jeju Island, South Korea

Freshwater–saline water interactions were evaluated in a coastal region influenced by external forces including tidal fluctuations and seasonal rainfall variations. Five different coastal zones were considered on Jeju Island, South Korea, and electrical conductivity (EC) profiles from the monitoring wells were examined to identify the configuration of the freshwater–saline water interface. There appeared to be discrepancies among EC profiles measured at different points in time. To analyze the dynamic behavior of freshwater–saline water interactions, groundwater level measurements and multi-depth EC and temperature probes were used to obtain time-series data; the data showed that water level, EC and temperature were influenced by both tidal fluctuations and heavy rainfall. The effects of oceanic tide on EC and temperature differed with depth due to hydraulic properties of geologic formations. A spectral filter was used to eliminate the effects of tidal forces and provide information on the influence of heavy rainfall on water level, EC and temperature. Heavy rainfall events caused different patterns and degrees of variation in EC and temperature with depth. The time-series data of EC and temperature in the subsurface at various depths enable greater understanding of the interaction processes between fresh and saline water.     

Structural control of groundwater flow regimes and groundwater chemistry along the lower reaches of the Zerka River,West Jordan,using remote sensing,GIS, and field methods

A hydrogeological study was completed within a sub-catchment of the Zerka River drainage basin, in western Jordan. The system is characterized by anticlinal bending with an axis trending SSW–NNE and plunging a few degrees in the SSW direction. The anticlinal structure diverts groundwater flow towards the SSW while the strike-slipe faults cause the groundwater to diverge where the fault is perpendicular to the groundwater flow lines, and to converge where the fault is parallel to the groundwater flow lines. A direct relationship was found between the location of springs and the type of groundwater flow with regard to the amount of discharge wherein large spring discharges are located in zones of converging groundwater flow lines. In areas where faults are not abundant, the groundwater retention time in the aquifers is long and a zonation of the electrical conductivity was detected due to mineral dissolution. By controlling groundwater flow, the anticlinal setting produces three genetic groups of groundwater flow systems: (1) alkaline–earth alkaline water which is predominately a bicarbonate-type composition, (2) alkaline–earth alkaline water which is predominately bicarbonate–sulfate, and (3) alkaline–earth alkaline water with a high alkaline component.     

Environmental applications of geophysical and geochemical methods to map groundwater quality at Tuticorin, Tamilnadu, India

Coastal aquifers can become polluted due to natural and human activities, such as intrusion of saline water, discharge of effluents in industrial areas and chemical weathering of natural geological deposits. The present study is aimed mainly at understanding the geophysical and chemical characteristics of groundwater near Tuticorin, Tamilnadu, India by studying the electrical resistivity distribution of the subsurface groundwater by applying the Schlumberger vertical electrical sounding (VES) technique followed by chemical analysis of water samples. A total of 20 VES soundings were carried out to understand the resistivity distribution of the area and 21 water samples were collected to analyze the chemical quality. The interpretation and analysis of the results have identified different hydrogeologic behaviors, a highly saline coastal aquifer and freshwater locations. The results obtained from geophysical and geochemical sampling are in good agreement with each other. The approach shows the efficacy of the combination of geophysical and geochemical methods to map groundwater contamination zones in the study area.