The GREGOR adaptive optics system

The new 1.5‐m German solar telescope GREGOR at the Observatorio del Teide, Tenerife, is equipped with an integrated adaptive optics system. Although partly still in the commissioning phase, the system is already being used used for most science observations. It is designed to provide diffraction‐limited observations in the visible‐light regime for seeing better than 1.2″. We describe the AO system including the optical design, software, wavefront reconstruction, and performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

SWIFT: An adaptive optics assisted I/z band integral field spectrograph

SWIFT is an adaptive optics assisted integral field spectrograph covering the I and z astronomical bands (0.7–1.0 μm) at a spectral resolving power R  5000. At its heart is an all-glass image slicer with high throughput based on a novel de-magnifying design allowing a compact instrument. SWIFT profits from two recent developments: (i) the improved ability of second generation adaptive optics systems to correct for atmospheric turbulence in SWIFTS’s bandpass, and (ii) the availability of CCD array detectors with high quantum efficiency at very red wavelengths. It is a dedicated integral field spectrograph, specifically built to address a range of interesting astrophysical questions.     

The FALCON concept: multi-object adaptive optics and atmospheric tomography for integral field spectroscopy – principles and performance on an 8-m telescope

Integral field spectrographs are major instruments with which to study the mechanisms involved in the formation and the evolution of early galaxies. When combined with multi-object spectroscopy, those spectrographs can behave as machines used to derive physical parameters of galaxies during their formation process. Up to now, there has been only one available spectrograph with multiple integral field units, i.e. FLAMES/GIRAFFE on the European Southern Observatory (ESO) Very Large Telescope (VLT). However, current ground-based instruments suffer from a degradation of their spatial resolution due to atmospheric turbulence. In this article we describe the performance of FALCON, an original concept of a new-generation multi-object integral field spectrograph with adaptive optics for the ESO VLT. The goal of FALCON is to combine high angular resolution (0.25 arcsec) and high spectral resolution  ( R > 5000)  in the J and H bands over a wide field of view  (10 × 10 arcmin²)  in the VLT Nasmyth focal plane. However, instead of correcting the whole field, FALCON will use multi-object adaptive optics (MOAO) to perform the adaptive optics correction locally on each scientific target. This requires us then to use atmospheric tomography in order to use suitable natural guide stars for wavefront sensing. We will show that merging MOAO and atmospheric tomography allows us to determine the internal kinematics of distant galaxies up to z ≈ 2 with a sky coverage of 50 per cent, even for objects observed near the Galactic pole. The application of such a concept to extremely large telescopes seems therefore to be a very promising way to study galaxy evolution from z = 1 to redshifts as high as z = 7.     

Pseudo-infinite guide stars for multi-conjugated adaptive optics on extremely large telescopes

We introduce a novel concept to sense the wavefront for adaptive optics purposes in astronomy using a conventional laser beacon. The concept we describe involves treating the light scattered in the mesospheric sodium layer as if it comes from multiple rings located at infinity. Such a concept resembles an inverse Bessel beam and is particularly suitable for multi-conjugated adaptive optics on extremely large telescopes. In fact, as the sensing process uses light apparently coming from infinity, some problems linked to the finite distance and vertical extent of the guide source are solved. Since such a technique is able to sense a wavefront solely in the radial direction, we propose furthermore a novel wavefront sensor by combining the inverse Bessel beam approach with the recently introduced z -invariant technique for a pseudo-infinite guide star sensor.     

NAOMI/OASIS on-sky performance

NAOMI is the AO system of the 4.2-m William Herschel Telescope on La Palma. It delivers an AO-corrected image to a lenslet array at the focal plane of the optical integral-field spectrograph OASIS. The resulting 1100 spectra are imaged onto a high-QE, low-fringing MITLL3 CCD. A range of spectroscopic and spatial (0.09–0.42 arcsec/lenslet) configurations is available. At wavelength  0.7 μm, the NAOMI-corrected FWHM is typically half that of the natural seeing. Scheduled OASIS observing began in semester 2004B, with 9 programmes awarded a total of 26 nights during the first year of operation. A Rayleigh laser guide star is under development, with first light expected summer 2006. In conjunction with NAOMI/OASIS, this will provide a unique facility: AO-corrected optical integral-field spectroscopy anywhere on the northern sky.     

Fast computation of 2D transfer functions from adaptive optics data

The use of atmospheric transfer functions is common in image reconstruction techniques such as speckle interferometry to calibrate the Fourier amplitudes of the reconstructed images. Thus, an accurate model is needed to ensure proper photometry in the reconstruction. The situation complicates when adaptive optics (AO) are used during data acquisition. I propose a novel technique to derive two‐dimensional transfer functions from data collected using AO simultaneously with the observations. The technique is capable to compute the relevant transfer functions within a short time for the prevailing atmospheric conditions and AO performance during data acquisition (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Improving the seeing with wide-field adaptive optics in the near-infrared

In this paper, we present simulation results of a ground-layer correction adaptive optics system (GLAO), based on four laser guide stars and a single deformable mirror. The goal is to achieve a seeing improvement over an 8-arcmin field of view, in the near-infrared (from 1.06 to 2.2 μm). We show results on the scaling of this system (number of subapertures, frame rates), and the required number of tip-tilt stars. We investigate the use for GLAO of both sodium and Rayleigh guide stars. We also show that if the lasers can be repositioned, the performance of the adaptive optics can be tailored to the astronomical observations.     

The High-energy Burst Spectrometer for SMESE Mission

The SMall Explorer for Solar Eruptions (SMESE) is a small satellite being developed jointly by China and France. It is planed to launch around the next solar maximum year (∼ 2011) for observing simultaneously the two most violent types of eruptive events on the sun (the coronal mass ejection (CME) and the solar flare) and investigating their relationship. As one of the 3 main payloads of the small satellite, the high energy burst spectrometer (HEBS) adopts the upto- date high-resolution LaBr3 scintillation detector to observe the high-energy solar radiation in the range 10 keV—600 MeV. Its energy resolution is better than 3.0% at 662 keV, 2-fold higher than that of current scintillation detectors, promising a breakthrough in the studies of energy release in solar flares and CMEs, particle acceleration and the relationship between solar flares and CMEs.     

High‐order adaptive optical system for Big Bear Solar Observatory

A high‐order Adaptive Optical (AO) system for the 65 cm vacuum telescope of the Big Bear Solar Observatory (BBSO) is presented. The Coudé‐exit of the telescope has been modified to accommodate the AO system and two imaging magnetograph systems for visible‐light and near infrared (NIR) observations. A small elliptical tip/tilt mirror directs the light into an optical laboratory on the observatory's 2^nd floor just below the observing floor. A deformable mirror (DM) with 77 mm diameter is located on an optical table where it serves two wave‐front sensors (WFS), a correlation tracker (CT) and Shack‐Hartman (SH) sensor for the high‐order AO system, and the scientific channels with the imaging magnetographs. The two‐axis tip/tilt platform has a resonance frequency around 3.3 kHz and tilt range of about 2 mrad, which corresponds to about 25″ in the sky. Based on 32 × 32 pixel images, the CT detects image displacements between a reference frame and real‐time frames at a rate of 2 kHz. High‐order wave‐front aberrations are detected in the SH WFS channel from slope measurements derived from 76 sub‐apertures, which are recorded with 1,280 × 1,024 pixel Complex Metal Oxide Semiconductor (CMOS) camera manufactured by Photobit camera. In the 4 × 4 pixel binning mode, the data acquisition rate of the CMOS device is more than 2 kHz. Both visible‐light and NIR imaging magnetographs use Fabry‐Pérot etalons in telecentric configurations for two‐dimensional spectro‐polarimetry. The optical design of the AO system allows using small aperture prefilters, such as interference or Lyot filters, and 70 mm diameter Fabry‐Pérot etalons covering a field‐of‐view (FOV) of about 180″ × 180″.     

FLECHAS – A new échelle spectrograph at the University Observatory Jena

The new échelle spectrograph FLECHAS (Fibre Linked ECHelle Astronomical Spectrograph) is in operation at the Nasmyth‐focus of the 0.9 m telescope of the University Observatory Jena. FLECHAS is equipped with a sensitive back‐illuminated and midband coated CCD‐detector, as well as with a calibration unit for flatfield and wavelength‐calibration. The spectrograph covers the spectral range between about 3900 and 8100 Å and exhibits a resolving power of R ∼ 9300. In this article all technical characteristics of FLECHAS are described and examples of the first astronomical observations obtained with the new instrument in July 2013 at the University Observatory Jena are presented, among them the first light spectra taken with FLECHAS, simultaneous imaging and spectroscopic observations, the determination of the detection limit of the instrument, the spectroscopy of stars of different spectral types and of faint extended objects, as well as the Li‐line detection in the spectra of young solar‐like stars. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Application of the X‐shooter physical model to flexure analysis

We use the large number of available X‐shooter automatic flexure compensation exposures that have accumulated in the archive to constrain parameters of the instrument physical model. This enables us to establish which physical model parameters vary with instrument orientation and hence directly identify physical mechanisms that give rise to flexure effects in the spectral format (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)