Stratigraphic evidence for a Late Devonian possible back-bulge basin in the Appalachian basin, United States

Isopach and sedimentary facies maps of Upper Devonian (upper Frasnian and lower Famennian) strata deposited in a part of the central Appalachian foreland basin (eastern United States) during the Acadian orogeny show a significant change in depositional style over time. Maps of two successive upper Frasnian intervals show steady thickening to the east towards the hinterland. Coarser‐grained sediment was deposited in distinct tongues in front of the Augusta lobe, a previously recognized locus of sediment input in the central Appalachian basin. Maps of two subsequent lower Famennian stratigraphic intervals show distinct depocentres in the study area. Famennian strata thin eastward (by about 50%) over a distance of about 90 km from these depocentres to the limit of mapping at the Allegheny structural front. This is towards the Acadian sediment source and in contrast to general Upper Devonian thickening in that direction. The axes of these lower Famennian depocentres are stacked on top of each other. Also, coarser‐grained lower Famennian sediment is concentrated in strike trends just east of the axes of the depocentres, and no coarser tongues exist in front of the Augusta lobe, in contrast to the underlying (upper Frasnian) strata. The duration of each of the four study intervals is estimated to be between 0.5 and 3.0 Myr. The early Famennian depocentres may be in a back‐bulge basin, with a forebulge uplifted to the east of the study area. Earlier deposition may have occurred in a basin with a subtle, subdued, and longer wavelength forebulge (perhaps located west of the study area). Previously published regional isopachs of Upper Devonian strata suggest that the main axis of subsidence of the Acadian foreland basin (foredeep depozone) at this time was over 350 km east of the study area. Examination of published quantitative flexural models of other foreland basins with flexural rigidities close to published rigidities calculated for the Appalachian basin suggests that the proposed back‐bulge basin is in the correct location, relative to the suggested position of the foredeep at that time. Several previously recognized structural features of the northern Appalachian basin support the interpretations presented herein. Much of the Acadian foreland basin may be eroded in the central Appalachian basin. The present study demonstrates the difficulties in recognizing foreland basin depozones in partially preserved orogens.     

Volcanism and sedimentation in part of a Late Archaean rift: the Hartbeesfontein basin, Transvaal, South Africa

The Hartbeesfontein basin is one basin within the Late Archaean rift system of South Africa. This rift system has been recently compared to the Basin and Range province in western North America and may therefore be an ensialic extensional back-arc basin. Structurally, the Hartbeesfontein basin is a half-graben structure bounded to the south-east by a major, normal, listric fault and to the north-east and south-west by strike-slip (transfer?) fault zones. It is infilled by over 2000 m of diamictites, shales, lavas and chemical sediments. Initial basin formation appears to be accompanied by phreatomagmatic volcanic activity caused by the interaction between basic tholeiitic magmas rising along fractures and groundwater. Volcaniclastic debris from these eruptions was incorporated into laharic debris flows and deposited on basin marginal alluvial fans. At the same time a deep, permanent lake formed within the basin in which silts and muds accumulated. Major fissure eruptions of basic, tholeiitic lavas followed, their eruptive centres being apparently located along the strike-slip (transfer?) fault /ones. Initially, these fissure eruptions had high rates of magma discharge accompanied by intense fire fountaining that resulted in the rapid accumulation of aa type flows. Later lava discharge rates decreased and more quiescent pahoehoe type flows were erupted. Localized centres of acid volcanism within the basic lava pile were located along the south-western strike-slip fault zone. These acid volcanic rocks are interpreted as co-ignimbrite lag breccias and pyroclastic flow deposits and tuffs produced by the repeated formation and collapse of Plinian eruption columns. Towards the top of the basic lava pile, two breaks in volcanism permitted the formation of dolomitic playa lakes. Sedimentation in these lakes was terminated by further basic lava flows. At the top of the basin fill sequence is a thick, bedded chert interpreted as a magadiitic, alkaline playa lake fed by silica-rich hot springs located along the south-eastern edge of the basin. Quartzites and conglomerates deposited by braided rivers unconformably overlie the basin-fill sequence and probably represent a through flowing river system signifying termination of the Hartbeesfontein basin as a separate basin. The Hartbeesfontein basin and its fill demonstrate that a close relationship exists between fissure volcanism, sedimentation and basin evolution and that the strike-slip, transfer faults acted as the loci of volcanic activity.     

Late Quaternary sedimentation and palaeohydrology in the Acre foreland basin, SW Amazonia

Our study explores the geohydraulic history of the Acre retroarc foreland basin by gathering both spatial and temporal information from the upper 400 m of sediments. We also inquire into controls on sediment accommodation space as well as on stream vs. lacustrine domination. The Acre basin is located in south-west Amazonia, proximal to the Serra do Divisor which demarcates the eastern edge of the Andean fold–thrust belt. Radiocarbon ages from a range of materials indicate that the upper 50–250 m of the Solimôes Formation accumulated during the past 50 000 years. Both surficial and drill-core sediment records show lacustrine–fluvial transitions throughout the Late Quaternary. These shifts in depositional environments are in response to episodic changes in hydrological conditions as well as to geodynamic activity, such as subsidence. Juxtaposition of lacustrine and fluvial systems in the vertical Acre basin record mimics the regional-scale trends in the modern, upper and middle Solimôes–Amazon floodplains. In the Acre basin record lacustrine successions are characterized by increasing calcium contents up-section. This is also manifested, in the upper portions of lacustrine sequences outcropping at the surface, as alternating clastic and calcareous layers. The up-section increase in carbonate content is related to increasing salinities brought about by drier hydrodynamic conditions. Desiccation cracks are typically infilled with gypsum as are cavities of fossils in bone-beds. The latter represent isolated ponds in which the original fauna died as aridity intensified and waters became increasingly saline. Modern trunk river systems in the Acre basin flow from south-west to north-east with tributaries entering from the south-west, suggesting the influence of a domino-style, basement, fault regime. Fault or, at least, fracture control on stream channels is also suggested throughout the greater Amazon basin in the orthogonal dispositions and asymmetric terrace systems of trunk rivers as well as of major tributaries.     

Late orogenic intramontane basin development: the Granada basin, Betics (southern Spain)

The quantitative study of subsidence in the Granada basin, using decompaction and backstripping techniques, and contemporaneous relief development in the surrounding areas, especially in the Sierra Nevada, provides a good case example of the development of an intramontane basin. In the Granada basin, according to the interpretation of the seismic profiles and results of the backstripping analysis, subsidence and sedimentation rates were at a maximum in the late Tortonian and decreased progressively; meanwhile, the neighbouring areas were uplifted forming important relief. Chronostratigraphical revisions of the marine sediments show that the marine incursion that deposited sediments in the Granada basin lasted only 1.3 Ma, between 8.5 and 7.2 Ma. The gradual retreat of the sea in the Granada basin is not attributable to global eustatic fluctuations, but rather to uplift in the Sierra Nevada and its adjacent areas. From latest Tortonian to early Messinian times, the region became continental and the Granada basin acquired its present physiography and was differentiated as such. From the late Tortonian onwards, NNW–SSE compression combined with ENE–WSW extension affected the cordillera. In the Granada basin, extension controlled fault movements. There are two well-defined fault sets: the first trends 70°N–90°E, with low angle faults (less than 30°) dipping towards the north and south, defining the subsiding areas which have approximately E–W direction; whereas the second set has a NW–SE direction, and cuts and displaces the previous ones, defining the main subsiding areas in the eastern part of the basin. The reinterpretation of seismic profiles reveals that the subsiding axes within the Granada basin persisted from the Tortonian to the present because of continued displacements of the main faults.     

Surface sediment characteristics and tower karst dissolution, Guilin, southern China

Dissolution of extensive outcrops of limestone and dolostone in humid tropical and subtropical southern China produced numerous caves and residual hills that are referred as tower karst. This study identifies and relates the physical and chemical characteristics of the surface sediment with the limestone bedrock in Guilin to assess the influence of the limestone dissolution process on sediment composition.The results of this study indicated that (i) both limestone and dolostone of the region are very pure (99.5% and 98.5% of CaCO₃ and MgCO₃, respectively); (ii) the material composition of limestone and dolostone is different from that of soil and sediment of the region: constituents of surface sediments are highly related with the clastic sedimentary rocks, such as the mudstone, but show negative correlation with limestone and dolostone; (iii) the limestone formations are highly resistant to physical weathering and disintegration; their durability versus physical weathering and their high susceptibility to chemical dissolution account for why residual towers can form and persist; (iv) a dual-zone environmental structure exists vertically downward from the surface in Guilin: the zone of unconsolidated clastic sediments that is predominantly acidic, and the zone of karstified limestone that is predominantly basic. The evidence suggests that the environment and processes differ in these two zones. The chemical dissolution of limestone that formed tower karst of the region is not mainly responsible for the accumulation of clastic sediment on the surface.     

Example of a supradetachment basin within a pull-apart tectonic setting: Mormon Point, Death Valley, California

The geological features now exposed at Mormon Point, Death Valley, reveal processes of extension that continue to be active, but are concealed beneath the east side of Death Valley. Late Cenozoic sedimentary rocks at Mormon Point crop out in the hangingwall of the Mormon Point low-angle normal fault zone, a fault zone that formed within a releasing bend of the oblique-slip (right-normal slip) fault zone along the east side of Death Valley. The late Cenozoic sedimentary rocks were part of the valley when the low-angle fault zone was active, but during late Quaternary time they became part of the Black Mountains block and were uplifted. Rocks and structures exposed at Mormon Point are an example of the types of features developed in a releasing bend along the margins of a major pull-apart structure, and in this example they are very similar to features associated with regional detachment faults. The oldest sedimentary rocks in the hangingwall of the Mormon Point low-angle fault zone dip steeply to moderately east or north-east and were faulted and rotated in an extensional kinematic environment different from that recorded by rocks and structures associated with younger rocks in the hangingwall. Some of the younger parts of the late Cenozoic sedimentary rocks were deposited, faulted and rotated during movement on the Mormon Point low-angle normal fault. Progressively, strata are less faulted and less rotated. The Mormon Point low-angle normal fault has an irregular fault surface whose segments define intersections that plunge 18°-30°, N10°-40°W, with a maximum of 22°, N22°W that we interpret to be the general direction of slip. Thus, even though Death Valley trends north, movement on the faults responsible for its formation was at least locally north-northwest. Gouge and disrupted conglomerates along the faults are interpreted to have formed either as adjustments to accommodate space problems at the corners of blocks or along faults that bounded blocks during their displacement and rotation. The younger units of the late Cenozoic sedimentary rock sequence and the geomorphic surfaces developed on them are rarely faulted, not rotated, and overlap the Mormon Point low-angle faults. Active faults cut Holocene alluvium north of the late Cenozoic rocks and form the present boundary between Mormon Point and the Black Mountains. The distribution of active faults defines a releasing bend that mimics the older releasing bend formed by the Mormon Point low-angle fault zone. Rocks and structures similar to those exposed above the Mormon Point low-angle fault zone are probably forming today beneath the east side of Death Valley north-west of Mormon Point.     

Oligocene to Early Miocene sedimentation and tectonics in the southern part of the Calabrian-Peloritan Arc (Aspromonte, southern Italy): a record of mixed-mode piggy-back basin evolution

The Calabrian-Peloritan Arc (southern Italy) represents a fragment of the European margin, thrusted onto the Apennines and Maghrebides during the Europe-Apulia collision in the late Early Miocene. A reconstruction of the pre-Middle Miocene tectono-sedimentary evolution of the southern part of the Calabrian-Peloritan Arc (CPA) is presented, based on a detailed analysis of the Stilo-Capo ?Orlando Formation (SCO Fm). Deposition of the SCO Fm occurred in a series of mixed-mode piggy-back basins. Basin evolution was controlled by two intersecting fault systems. A NW-SE oriented system delimited a series of sub-basins and fixed the position of feeder channels and submarine canyons, whereas a NE-SW oriented system controlled the axial dispersal of coarse-grained sediments within each of the sub-basins. From base to top, sedimentary environments change from terrestrial and lagoonal to upper bathyal over a timespan of approximately 12 Myr (late Early Oligocene-late Early Miocene). During this interval, extensional tectonic activity alternated with oblique backthrusting events, related to dextral transpression along the NW-SE oriented faults. This produced a characteristic pulsating pattern of basin evolution. Oligocene-Early Miocene evolution of the W. Mediterranean basin was dominated by ‘roll back’ of the Neotethyan oceanic lithosphere. Considerable extension in the overriding European Plate gave rise to the formation of a back arc-thrust system. The initial stages of Calabrian Basin evolution are remarkably similar to the evolution of rift basins in the back arc (Sardinia). The Calabrian basins, which are inferred to have originated as thin-skinned pull-apart basins, were subsequently incorporated into the Apennines-Maghrebides accretionary wedge by out-of-sequence thrusting, and became decoupled from the back arc. Periodic restabilization of the accretionary wedge, resulting in an alternation of backthrusting and listric normal faulting, provides an explanation for the structural evolution of these mixed-mode basins. The basins of the southern part of the CPA may be termed ‘spanner’ or ‘looper’ basins, in view of their characteristic pulsating structural evolution, superimposed upon their migration toward the foreland. This new term adequately accounts for the occurrence of tectonic inversions in long-lived piggy-back basins, as expected in the light of the dynamics of accretionary wedges.     

Using detrital zircon U‐Pb ages to calculate Late Cretaceous sedimentation rates in the Magallanes‐Austral basin,Patagonia

Determining both short‐ and long‐term sedimentation rates is becoming increasingly important in geomorphic (exhumation and sediment flux), structural (subsidence/flexure) and natural resource (predictive modelling) studies. Determining sedimentation rates for ancient sedimentary sequences is often hampered by poor understanding of stratigraphic architecture, long‐term variability in large‐scale sediment dispersal patterns and inconsistent availability of absolute age data. Uranium–Lead (U‐Pb) detrital zircon (DZ) geochronology is not only a popular method to determine the provenance of siliciclastic sedimentary rocks but also helps delimit the age of sedimentary sequences, especially in basins associated with protracted volcanism. This study assesses the reliability of U‐Pb DZ ages as proxies for depositional ages of Upper Cretaceous strata in the Magallanes‐Austral retroarc foreland basin of Patagonia. Progressive younging of maximum depositional ages (MDAs) calculated from young zircon populations in the Upper Cretaceous Dorotea Formation suggests that the MDAs are potential proxies for absolute age, and constrain the age of the Dorotea Formation to be ca. 82–69 Ma. Even if the MDAs do not truly represent ages of contemporaneous volcanic eruptions in the arc, they may still indicate progressive‐but‐lagged delivery of increasingly younger volcanogenic zircon to the basin. In this case, MDAs may still be a means to determine long‐term (≥1–2 Myr) average sedimentation rates. Burial history models built using the MDAs reveal high aggradation rates during an initial, deep‐marine phase of the basin. As the basin shoaled to shelfal depths, aggradation rates decreased significantly and were outpaced by progradation of the deposystem. This transition is likely linked to eastward propagation of the Magallanes fold‐thrust belt during Campanian‐Maastrichtian time, and demonstrates the influence of predecessor basin history on foreland basin dynamics.     

The Hesperides basin: a continental‐scale upper Palaeozoic to Triassic basin in southern Gondwana

The late Palaeozoic to Triassic sedimentary record of the central Argentinean offshore was analysed through the integration of data from exploratory wells and 2D seismic lines. Our interpretations were combined with existing ones in Argentina, Uruguay, Brazil and South Africa for their analysis in the late Palaeozoic south‐western Gondwana context. The mapped upper Palaeozoic‐Lower Triassic stratigraphic record offshore Argentina bears a thickness of +7000 m south of the Colorado basin and encompasses the time span between Pennsylvanian and Lower Triassic; this means that it triples that of the Sierras de la Ventana of Argentina and involves a far larger time span. On the basis of seismic stratigraphic interpretations in localities near the coast, we interpret that a strong denudation process removed a great portion of the stratigraphic record in the Sierras de la Ventana, the surrounding plains and the Tandilia system of Buenos Aires. The seismic stratigraphic configuration of the late Palaeozoic succession shows continuous and parallel reflections in a wide sediment wedge extending for more than 1000 km between the Gondwanides orogen core to the south and offshore Uruguay to the north. Two salient aspects of this sedimentary wedge are that no flexural depocentre was observed at the Ventania fold belt front, and that deformation in the orogenic front is post‐Lower Triassic. The original westwards extent of the basin is interpreted to have encompassed the whole of Buenos Aires province in continuity with the Chacoparaná basin; to the east continuity and a straightforward correlation with the Karoo basin was interpreted. The name of Hespérides Basin is proposed herein to refer to a Pennsylvanian to Lower Triassic basin mainly controlled by dynamic subsidence that encompasses and exceeds the area of the Sauce Grande and Colorado basins and the Claromecó fore‐deep in Argentina. The Hespérides basin is interpreted to have been in lateral continuity with the Kalahari, Karoo and Chacoparaná basins of Africa and South America forming a +3 000 000 sq. km depocentre.     

Implications of diverse sedimentation patterns in Hala Lake, Qinghai Province, China for reconstructing Late Quaternary climate

Hala Lake is located in the Qilian Mountains, Qinghai Province, China, at 4,078?m a.s.l. Its sediments contain an archive of climate and hydrologic changes during the Late Quaternary, as it is located close to the area influenced by the East-Asian summer monsoon and westerly-driven air masses. Sedimentation patterns and depositional conditions within the lake were investigated using eight sediment cores from different water depths, and this information was used to evaluate the feasibility of using a single core to reconstruct past climate and hydrological conditions. Long core H7, from the center of the lake (65?m water depth) and core H8 from a western, near-shore location (20?m water depth), were compared in detail using sediment composition and geochemical data (X-ray fluorescence, loss-on-ignition and CNS analysis). Age models were constructed using 17 AMS radiocarbon dates and indicate negligible reservoir error for sediments from the lake center and?~1,000?year errors for the near-shore sediment core. Cores H1?CH5 and HHLS21-1 revealed a sediment succession from sand and silty clay to laminated clay on the southern side of the lake. Undisturbed, finely laminated sediments were found at water depths???15?m. Core H5 (2.5?m long), from 31?m water depth, yielded abundant green algal mats mixed with clayey lake deposits and was difficult to interpret. Algae occurred between 25 and 32?m water depth and influenced the dissolved oxygen content of the stratified lake. Comparison of cores H7 and H8 yielded prominent mismatches for different time periods, which may, in part, be attributed to internal lacustrine processes, independent of climate influence. We thus conclude that data from a single sediment core may lead to different climate inferences. Common shifts among proxy data, however, showed that major climate shifts, of regional to global significance, can be tracked and allow reconstruction of lake level changes over the last 24,000?years. Results indicate advance of glaciers into the lake basin during the LGM, at which time the lake experienced lowest levels, 25?C50?m below present stage. Stepwise refilling began at ca. 16 kyr BP and reached the ?25?m level during the B?lling/Aller?d warm phase, ca. 13.5 kyr BP. A desiccation episode falls within the Younger Dryas, followed by a substantial lake level rise during the first millennium of the Holocene, a result of climate warming, which promoted glacier melt. By ca. 7.6 kyr BP, the lake reached a stable high stand similar to the present level, which persisted until ca. 6 kyr BP. Disturbed sediments in core H7 indicate a single mass flow that was most likely triggered by a major seismic event?~8.5 kyr BP. Subsequent lake development remains unclear as a consequence of data mismatches, but may indicate a general trend to deteriorating conditions and lake level lowstands at ca. 5.0?C4.2, 2.0 and 0.5 kyr BP.     

Tectonics and sedimentation in the hangingwall of a major extensional detachment: the Devonian Kvamshesten Basin, western Norway

The Middle Devonian Kvamshesten Basin in western Norway is a late-orogenic basin situated in the hangingwall of the regional extensional Nordfjord–Sogn Detachment Zone. The basin is folded into a syncline with the axis subparallel to the ductile lineations in the detachment zone. The structural and stratigraphic development of the Kvamshesten Basin indicates that the basin history is more complex than hitherto recognized. The parallelism stated by previous workers between mylonitic lineation below the basin and intrabasinal fold axes is only partly reflected in the configuration of sedimentary units and in the time-relations between deposits on opposing basin margins. The basin shows a pronounced asymmetry in the organization and timing of sedimentary facies units. The present northern basin margin was characterized by bypass or erosion at the earliest stage of basin formation, but was subsequently onlapped and eventually overlain by fanglomerates and sandstones organized in well-defined coarsening-upwards successions. The oldest and thickest depositional units are situated along the present southern basin margin. This as well as onlap relations towards basement at low stratigraphic level indicates a significant component of southwards tilt of the basin floor during the earliest stages of deposition. The inferred south-eastwards tilt was most likely produced by north-westwards extension during early stages of basin formation. Synsedimentary intrabasinal faults show that at high stratigraphic levels, the basin was extending in an E–W as well as a N–S direction. Thus, the basin records an anticlockwise rotation of the syndepositional strain field. In addition, our observations indicate that shortening normal to the extension direction cannot have been both syndepositional and continuous, as suggested by previous authors. Through most of its history, the basin was controlled by a listric, ramp-flat low-angle fault that developed into a scoop shape or was flanked by transfer faults. The basin-controlling fault was rooted in the extensional mylonite zone. Sedimentation was accompanied by formation of a NE- to N-trending extensional rollover fold pair, evidenced by thickness variations in the marginal fan complexes, onlap relations towards basement and the fanning wedge geometry displayed by the Devonian strata. Further E–W extension was accompanied by N–S shortening, resulting in extension-parallel folds and thrusts that mainly post-date the preserved basin stratigraphy. During shortening, conjugate extensional faults were rotated to steeper dips on the flanks of a basin-wide syncline and re-activated as strike-slip faults. The present scoop-shaped, low-angle Dalsfjord fault cross-cut the folded basin and juxtaposed it against the extensional mylonites in the footwall of the Nordfjord–Sogn detachment. Much of this juxtaposition may post-date sedimentation in the preserved parts of the basin. Basinal asymmetry as well as variations in this asymmetry on a regional scale may be explained by the Kvamshesten and other Devonian basins in western Norway developing in a strain regime affected by large-scale sinistral strike-slip subparallel to the Caledonian orogen.     

Late Miocene lacustrine sedimentation in the Mytilinii Basin,Samos Island,Greece

The Mytilinii Basin, eastern Samos Island, Greece, is one of many basins that developed in southeastern Europe during the Upper Neogene. The oldest lacustrine portion is of Late Miocene age, and besides tuffs, includes bituminous limestones, marlstones, dolostones and porcelanites of the Pythagorion Formation, and the limestones and diatomites of the overlying Hora Beds. Younger sedimentary rocks of Turolian through Pliocene age partially covered the Pythagorion Formation and Hora Beds (PFHB). Diatom floras range from well preserved to highly corroded and from sparse to abundant. The main taxa include Cyclotella aegaea, C. aegaea var. pythagoria, an unidentified Cyclotella and Nitzschia frustulum, and less common Epithemia turgida, E. reichelti, Synedra ulna, Tryblionella granulata, Encyonema silesiaca, Diploneis ovalis and Cocconeis placentula. Chrysophyte cysts, Hydrobia molluscs and trace fossils occur sporadically. The environmental evolution of the PFHB can be divided into three major stages. Fluctuating shallow to deeper waters in a saline lake characterized Stage A. Saline lake and playa environments with evidence for frequent earthquake events in the form of convolute bedding, drape folds and brecciated sediments characterized Stage B. During Stage C, the lake may have partially or completely split into two separate lakes. In the southeast, a saline playa passed laterally into a deeper-water lake. Locally, fresher-water ponds occurred. Subsequently, a deeper, possibly oligotrophic lake developed. In contrast, a saline lake with abundant diatoms formed in the northwest of the basin, in which diatom blooms led to whiting events and deposition of carbonate laminae. Cyclotella dominated the early floras in this water body, with later assemblages being co-dominated by Cyclotella and Nitzschia frustulum, possibly reflecting seasonal changes. Sedimentation was terminated by uplift and (or) increasing aridity associated with the Messinian Salinity Crisis.     

Compressional salt tectonics and synkinematic strata of the western Kuqa foreland basin,southern Tian Shan,China

The synkinematic strata of the Kuqa foreland basin record a rich history of Cenozoic reactivation of the Palaeozoic Tian Shan mountain belt. Here, we present new constraints on the history of deformation in the southern Tian Shan, based on an analysis of interactions between tectonics and sedimentation in the western Kuqa basin. We constructed six balanced cross‐sections of the basin, integrating surface geology, well data and a grid of seismic reflection profiles. These profiles show that the Qiulitage fold belt on the southern edge of the Kuqa basin developed by thin‐skinned compression salt tectonics. The structural styles have been influenced by two major factors: the nature of early‐formed diapirs and the basinward depositional limit of the Kumugeliemu salt. Several early diapirs developed in the western Kuqa basin, soon after salt deposition, which acted to localize the subsequent shortening. Where diapirs had low relief and a thick overburden they tended to tighten into salt domes 3000–7000 m in height. Conversely, where the original diapirs had higher relief and a thinner overburden they tended to evolve into salt nappes, with the northern flanks of the diapirs thrusting over their southern flanks. Salt was expelled forward, up dip along the mother salt layer, tended to accumulate at the distal pinch‐out of Kumugeliemu salt located at the Qiulitage fold belt. Furthermore, the synkinematic strata (6–8 km thick) of the Kuqa basin indicate that during the Cenozoic reactivation of the Tian Shan, shortening of the western Kuqa basin was mainly in the hinterland until the early Miocene. Then, compression spread simultaneously southwards to the Dawanqi anticline, the Qiulitage fold belt and the southernmost blind detachment fold at the end of Miocene. The western Kuqa basin has a shortening of ca. 23 km. We consider that ca. 9 km was consumed from the end of the Miocene (5.2/5.8 Ma) to the early Pleistocene (2.58 Ma) and another ca. 14 km have been absorbed since then. Thus, we obtain a ca. 3.4/2.8 mm year^?1 average shortening from 5.2/5.8 to 2.58 Ma, followed by a 60–90% increase in average shortening rate to ca. 5.4 mm year^?1 since 2.58 Ma. This suggests that the reactivation of the modern Tian Shan has been accelerating up to the present day.     

Caledonian foreland basin sedimentation: A new depositional model for the Upper Silurian‐Lower Devonian Lower Old Red Sandstone of the Midland Valley Basin,Scotland

Reconstruction of the geological history of orogenic events can be challenging where basins have limited and/or fragmentary preservation. Here, we apply understanding gained from modern analogues to the sedimentological analysis of the succession of Upper Silurian to Lower Devonian Lower Old Red Sandstone (LORS), northern Midland Valley, Scotland, in order to reconstruct the foreland to the Caledonian orogeny. A new depositional model is presented which differs significantly from current understanding. Using facies analysis, grain size distribution and palaeocurrent data a large distributive fluvial system is reconstructed. Three lithofacies and nine sublithofacies are identified, forming fluvial channel and floodplain facies associations. The system was derived from an emerging mountain range in the Caledonian foreland undergoing constant tectonic rejuvenation to produce 9 km of coarse‐grained sediment, exhibiting an overall decrease in thickness towards the west and a large‐scale downstream reduction in grain size. Conglomerate sublithofacies dominate proximal areas in the east where amalgamated fluvial channel facies association is abundant, with a downstream increase in the dominance of floodplain facies. Additionally, observed grain size cyclicity is attributed to a pulsatory tectonic influence. The LORS records the time‐period between the late phases of the Caledonian Orogeny and the onset of post‐orogenic collapse in the mid‐Devonian and the presented model allows improved understanding of the north‐Atlantic Caledonian foreland.     

Magnetostratigraphic investigations of the Middle Triassic Badong Formation in South China

Magnetostratigraphic sampling of the Middle Triassic Badong Formation in South China was conducted at three sections. A dual-polarity characteristic remanent magnetization (ChRM) resolved from most samples by thermal demagnetization is shown to have been acquired prior to folding. The primary nature of the ChRM is corroborated by the discovery of the same magnetic polarity at equivalent stratigraphic levels in more than one section. The relative sample VGP (virtual geomagnetic pole) latitudes define nine magnetozones for the three major constituent members of the formation. Comparison with the Mid-Triassic magnetic polarity sequence observed from the western Tethyan region appears to indicate that the bulk of the Badong Formation is Anisian in age and that Ladinian sediments are largely missing. This agrees with palaeontological and stratigraphic evidence in the region and supports the view that Ladinian regression is a major event in the geological evolution of South China, which may signal the onset of amalgamation of the Yangtze Block (YB) with the North China Block (NCB).     

Interplay of eustatic,tectonic and autogenic controls on a Late Devonian carbonate platform,northern Canning Basin,Australia

Frasnian reef complexes along the northern margin of the Canning Basin in northwestern Australia evolved during rifting of the Fitzroy Trough. Geological investigations of the Frasnian Hull platform, which developed on an active tilted fault‐block, reveal significant lateral and vertical facies variations superimposed on prominent metre‐scale cyclicity. This study uses numerical analyses of facies and magnetic susceptibility data from three measured sections along the Hull platform to test whether a tectonic signal can be distinguished from eustatic and other signals. Geostatistical analysis of facies variations reveals an exponential distribution of thin (<3 m) facies, characteristic of stochastic depositional processes. Thick subtidal facies predominate in the Guppy Hills (GH) and southeastern Hull Range (SHR) sections near the hangingwall margin, and thick shallow‐subtidal to intertidal facies dominate the Horse Springs drillcore (HD 14) section near the footwall margin. Power and wavelet spectral analyses indicate a strong periodic component; Average Spectral Misfit and spectral optimisation methods confirm the presence of Milankovitch eccentricity signals and suggest the presence of obliquity and precession signals. However, the results also expose strong temporal and spatial variation providing evidence for tectonic control. Spectral analyses show strongest periodicity is recorded in short intervals that are not correlated across the platform and provide evidence of variations in sedimentation rate and hiatuses. Time series for the neighbouring GH and SHR sections show no overall statistical correlation, and Markov analysis indicates weakly ordered vertical facies transitions that do not correlate across the platform. Subtidal to intertidal facies data from HD 14 core suggest that at least 35% of the section is absent, almost obscuring the Milankovitch signal. The results indicate a complex set of controls on deposition on the Hull platform with local tectonic effects having produced spatio‐temporal moderation of the underlying eustatic signals and autogenic processes adding a localised stochastic response.     

Chemical weathering and CO2 consumption in the Xijiang River basin, South China

Monthly samples of riverine water were collected and analyzed for the concentrations of major ions (Ca²⁺, Mg²⁺, K⁺, Na⁺, HCO₃⁻, SO₄²⁻, Cl⁻, NO₃⁻), dissolved silicon, and total dissolved solids (TDS) at Wuzhou hydrological station located between the middle and lower reaches of the Xijiang River (XJR) from March 2005 to April 2006. More frequent sampling and analysis were carried out during the catastrophic flooding in June 2005. Stoichiometric analysis was applied for tracing sources of major ions and estimating CO₂ consumption from the chemical weathering of rocks. The results demonstrate that the chemical weathering of carbonate and silicate rocks within the drainage basin is the main source of the dissolved chemical substances in the XJR. Some 81.20% of the riverine cations originated from the chemical weathering processes induced by carbonic acid, 11.32% by sulfuric acid, and the other 7.48% from the dissolution of gypsum and precipitates of sea salts within the drainage basin. The CO₂ flux consumed by the rock chemical weathering within the XJR basin is 2.37 × 10¹¹ mol y^− 1, of which 0.64 × 10¹¹ mol y^− 1 results from silicate rock chemical weathering, and 1.73 × 10¹¹ mol y^− 1 results from carbonate rock chemical weathering. The CO₂ consumption comprises 0.38 × 10¹¹ mol during the 9-d catastrophic flooding. The CO₂ consumption from rock chemical weathering in humid subtropical zones regulates atmospheric CO₂ level and constitutes a significant part of the global carbon budget. The carbon sink potential of rock chemical weathering processes in the humid subtropical zones deserves extra attention.