Tropical cyclone prediction over Bay of Bengal: a comparison of the performance of NCEP operational HWRF, NCAR ARW, and MM5 models

Much progress has been made in the area of tropical cyclone prediction using high-resolution mesoscale models based on community models developed at National Centers for Environmental Predication (NCEP) and National Center for Atmospheric Research (NCAR). While most of these model research and development activities are focused on predicting hurricanes in the Atlantic and Eastern Pacific domains, there has been much interest in using these models for tropical cyclone prediction in the North Indian Ocean region, particularly for Bay of Bengal storms that are known historically causing severe damage to life and property. In this study, the advanced operational hurricane modeling system developed at NCEP, known as the Hurricane Weather Research and Forecast (HWRF) model, is used to simulate two recent Bay of Bengal tropical cyclones??Nargis of November 2007 and Sidr of April 2008. The advanced NCEP operational vortex initialization procedure is adapted for simulating these Bay of Bengal tropical cyclones. Two additional regional models, the NCAR Advanced Research WRF and NCAR/Penn State University Mesoscale Model version 5 (MM5) are also used in simulating these storms. Results from these experiments highlight the superior performance of HWRF model over other models in predicting the Bay of Bengal cyclones. These results also suggest the need for a sophisticated vortex initialization procedure in conjunction with a model designed exclusively for tropical cyclone prediction for operational considerations.     

Performance evaluation of HWRF model during post monsoon tropical cyclone Nilofar

An accurate tropical cyclone track and intensity forecast is very important for disaster management. Specialized numerical prediction models have been recently used to provide high-resolution temporal and special forecasts. Hurricane Weather Research and Forecast (HWRF) model is one of the emerging numerical models for tropical cyclone forecasting. This study evaluates the performance of HWRF model during the post monsoon tropical cyclone Nilofar on the north Indian Ocean basin. The evaluation uses the best track data provided by the Indian Meteorological Department (IMD) and the Joint Typhoon Warning Centre (JTWC). Cyclone track, central pressure, and wind speed are covered on this evaluation. Generally, HWRF was able to predict the Nilofar track with track error less than 230 km within the first 66 h of forecast time span. HWRF predicted more intense tropical cyclone. It predicted the lowest central pressure to be 922 hPa while it reached 950 hPa according to IMD and 937 hPa according to JTWC. Wind forecast was better as it predicted maximum wind speed of 122 kt while it reached 110 and 115 kt according to IMD and JTWC, respectively.     

Sensitivity of tropical cyclone intensification to boundary layer and convective processes

This study examines the role of the parameterization of convection, planetary boundary layer (PBL) and explicit moisture processes on tropical cyclone intensification. A high-resolution mesoscale model, National Center for Atmospheric Research (NCAR) model MM5, with two interactive nested domains at resolutions 90 km and 30 km was used to simulate the Orissa Super cyclone, the most intense Indian cyclone of the past century. The initial fields and time-varying boundary variables and sea surface temperatures were taken from the National Centers for Environmental Prediction (NCEP) (FNL) one-degree data set. Three categories of sensitivity experiments were conducted to examine the various schemes of PBL, convection and explicit moisture processes. The results show that the PBL processes play crucial roles in determining the intensity of the cyclone and that the scheme of Mellor-Yamada (MY) produces the strongest cyclone. The combination of the parameterization schemes of MY for planetary boundary layer, Kain-Fritsch2 for convection and Mixed-Phase for explicit moisture produced the best simulation in terms of intensity and track. The simulated cyclone produced a minimum sea level pressure of 930 hPa and a maximum wind of 65 m s⁻¹ as well as all of the characteristics of a mature tropical cyclone with an eye and eye-wall along with a warm core structure. The model-simulated precipitation intensity and distribution were in good agreement with the observations. The ensemble mean of all 12 experiments produced reasonable intensity and the best track.     

Impact of initial and boundary conditions on simulations of western disturbances and associated precipitation

Western Himalayas (WH) is characterized by variable topography and heterogeneous land use. During winter, it receives enormous amount of precipitation due to eastward moving extratropical cyclones, called western disturbances (WDs), in Indian parlance. This variable altitude and orientation of orographic barriers has a complex interplay with WDs in defining precipitation over the WH. To understand such complexities, three WDs are considered to study interaction with the Himalayan orography using the advanced regional prediction system. Two simulation strategies are performed and presented??first to illustrate the impact of different initial and boundary conditions and second to illustrate the impact of different horizontal model resolution with same model configuration. In the first strategy, three different initial and boundary conditions??the National Center for Environmental Prediction?CGlobal Forecast System, USA (NCEP?CGFS) (1) analysis (2) 0000UTC forecast and the National Center for Medium Range Weather Forecast, India?CT80 spectral model (NCMRWF?CT80) (3) 0000UTC forecast??are provided to the same model configuration. In the second strategy, outputs from model simulated with NCMRWF??T80 spectral model forecast at coarser horizontal model resolution of 30?km (hereafter called Experiment I) are used as input initial and boundary conditions for simulation at finer horizontal model resolution of 10?km (hereafter called Experiment II). Though there are many other dynamical factors, but in the present study, it is shown that model-simulated precipitation is sensitive to the initial and boundary conditions. Simulations at coarse resolution could capture the weather system, but detailed spatial distribution along the orography is better illustrated at finer resolution model simulation. Also, Experiment II could simulate precipitation over different ranges of the western Himalayas depicting orographic forcings.     

Impact of satellite observed microwave SST on the simulation of tropical cyclones

The impact of realistic representation of sea surface temperature (SST) on the numerical simulation of track and intensity of tropical cyclones formed over the north Indian Ocean is studied using the Weather Research and Forecast (WRF) model. We have selected two intense tropical cyclones formed over the Bay of Bengal for studying the SST impact. Two different sets of SSTs were used in this study: one from TRMM Microwave Imager (TMI) satellite and other is the weekly averaged Reynold’s SST analysis from National Center for Environmental Prediction (NCEP). WRF simulations were conducted using the Reynold’s and TMI SST as model boundary condition for the two cyclone cases selected. The TMI SST which has a better temporal and spatial resolution showed sharper gradient when compared to the Reynold’s SST. The use of TMI SST improved the WRF cyclone intensity prediction when compared to that using Reynold’s SST for both the cases studied. The improvements in intensity were mainly due to the improved prediction of surface latent and sensible heat fluxes. The use of TMI SST in place of Reynold’s SST improved cyclone track prediction for Orissa super cyclone but slightly degraded track prediction for cyclone Mala. The present modeling study supports the well established notion that the horizontal SST gradient is one of the major driving forces for the intensification and movement of tropical cyclones over the Indian Ocean.     

Impact of modification of initial cyclonic structure on the prediction of a cyclone over the Arabian Sea

Most tropical cyclones have very few observations in their vicinity. Hence either they go undetected in standard analyses or are analyzed very poorly, with ill defined centres and locations. Such initial errors obviously have major impact on the forecast of cyclone tracks using numerical models. One way of overcoming the above difficulty is to remove the weak initial vortex and replace it with a synthetic vortex (with the correct size, intensity and location) in the initial analysis. The objective of this study is to investigate the impact of introducing NCAR–AFWA synthetic vortex scheme in the regional model MM5 on the simulation of a tropical cyclone formed over the Arabian Sea during November 2003. Two sets of numerical experiments are conducted in this study. While the first set utilizes the NCEP reanalysis as the initial and lateral boundary conditions, the second set utilizes the NCAR–AFWA synthetic vortex scheme. The results of the two sets of MM5 simulations are compared with one another as well as with the observations and the NCEP reanalysis. It is found that inclusion of the synthetic vortex has resulted in improvements in the simulation of wind asymmetries, warm temperature anomalies, stronger vertical velocity fields and consequently in the overall structure of the tropical cyclone. The time series of the minimum sea level pressure and maximum wind speed reveal that the model simulations are closer to observations when synthetic vortex was introduced in the model. The central minimum pressure reduces by 17 hPa while the maximum wind speed associated with the tropical cyclone enhances by 17 m s ⁻¹ with the introduction of the synthetic vortex. While the lowest central pressure estimated from the satellite image is 988 hPa, the corresponding value in the synthetic vortex simulated cyclone is 993 hPa. Improvements in the overall structure and initial location of the center of the system have contributed to considerable reduction in the vector track prediction errors ie. 642 km in 24 h, 788 km in 48 h and 1145 km in 72 h. Further, simulation with the synthetic vortex shows realistic spatial distribution of the precipitation associated with the tropical cyclone.     

Impact of sea surface temperature in modulating movement and intensity of tropical cyclones

It is well recognized that sea surface temperature (SST) plays a dominant role in the formation and intensification of tropical cyclones. A number of observational/empirical studies were conducted at different basins to investigate the influence of SST on the intensification of tropical cyclones and in turn, modification in SST by the cyclone itself. Although a few modeling studies confirmed the sensitivity of model simulation/forecast to SST, it is not well quantified, particularly for Bay of Bengal cyclones. The present study is designed to quantify the sensitivity of SST on mesoscale simulation of an explosively deepening storm over the Bay of Bengal, i.e., Orissa super cyclone (1999). Three numerical experiments are conducted with climatological SST, NCEP (National Center for Environmental Prediction) skin temperature as SST, and observed SST (satellite derived) toward 5-day simulation of the storm using mesoscale model MM5. At model initial state, NCEP skin temperature and observed SST over the Bay of Bengal are 1–2°C warmer than climatological SST, but cooler by nearly 1°C along the coastline. Observed SST shows a number of warm patches in the Bay of Bengal compared with NCEP skin temperature. The simulation results indicate that the sea surface temperature has a significant impact on model-simulated track and intensity of the cyclonic storm. The track and intensity of the storm is better simulated with the use of satellite-observed SST.     

Impact of bogus vortex for track and intensity prediction of tropical cyclone

The initialization scheme designed to improve the representation of a tropical cyclone in the initial condition is tested during Orissa super cyclone (1999) over Bay of Bengal using the fifth-generation Pennsylvania State University — National Center for Atmospheric Research (Penn State — NCAR) Mesoscale Model (MM5). A series of numerical experiments are conducted to generate initial vortices by assimilating the bogus wind information into MM5. Wind speed and location of the tropical cyclone obtained from best track data are used to define maximum wind speed, and centre of the storm respectively, in the initial vortex. The initialization scheme produced an initial vortex that was well adapted to the forecast model and was much more realistic in size and intensity than the storm structure obtained from the NCEP analysis. Using this scheme, the 24-h, 48-h, and 72-h forecast errors for this case was 63, 58, and 46 km, respectively, compared with 120, 335, and 550 km for the non-vortex initialized case starting from the NCEP global analysis. When bogus vortices are introduced into initial conditions, the significant improvements in the storm intensity predictions are also seen. The impact of the vortex size on the structure of the initial vortex is also evaluated. We found that when the radius of maximum wind (RMW) of the specified vortex is smaller than that of which can be resolved by the model, the specified vortex is not well adapted by the model. In contrast, when the vortex is sufficiently large for it to be resolved on horizontal grid, but not so large to be unrealistic, more accurate storm structure is obtained.     

Numerical simulation of cyclonic storms FANOOS, NARGIS with assimilation of conventional and satellite observations using 3-DVAR

In this work, the impact of assimilation of conventional and satellite data is studied on the prediction of two cyclonic storms in the Bay of Bengal using the three-dimensional variational data assimilation (3D-VAR) technique. The FANOOS cyclone (December 6?C10, 2005) and the very severe cyclone NARGIS (April 28?CMay 2, 2008) were simulated with a double-nested weather research and forecasting (WRF-ARW) model at a horizontal resolution of 9?km. Three numerical experiments were performed using the WRF model. The back ground error covariance matrix for 3DVAR over the Indian region was generated by running the model for a 30-day period in November 2007. In the control run (CTL), the National Centers for Environmental Prediction (NCEP) global forecast system analysis at 0.5° resolution was used for the initial and boundary conditions. In the second experiment called the VARCON, the conventional surface and upper air observations were used for assimilation. In the third experiment (VARQSCAT), the ocean surface wind vectors from quick scatterometer (QSCAT) were used for assimilation. The CTL and VARCON experiments have produced higher intensity in terms of sea level pressure, winds and vorticity fields but with higher track errors. Assimilation of conventional observations has meager positive impact on the intensity and has led to negative impact on simulated storm tracks. The QSCAT vector winds have given positive impact on the simulations of intensity and track positions of the two storms, the impact is found to be relatively higher for the moderate intense cyclone FANOOS as compared to very severe cyclone NARGIS.     

A new ensemble-based data assimilation algorithm to improve track prediction of tropical cyclones

This paper proposes a new ensemble-based algorithm that assimilates the vertical rain structure retrieved from microwave radiometer and radar measurements in a regional weather forecast model, by employing a Bayesian framework. The goal of the study is to evaluate the capability of the proposed technique to improve track prediction of tropical cyclones that originate in the North Indian Ocean. For this purpose, the tropical cyclone Jal has been analyzed by the community mesoscale weather model, weather research and forecasting (WRF). The ensembles of prognostic variables such as perturbation potential temperature (θ, k), perturbation geopotential (?, m²/s²), meridional (U) and zonal velocities (V) and water vapor mixing ratio (q _v , kg/kg) are generated by the empirical orthogonal function technique. An over pass of the tropical rainfall-measuring mission (TRMM) satellite occurred on 06th NOV 0730 UTC over the system, and the observations from the radiometer and radar on board the satellite(1B11 data products) are inverted using a combined in-home radiometer-radar retrieval technique to estimate the vertical rain structure, namely the cloud liquid water, cloud ice, precipitation water and precipitation ice. Each ensemble is input as a possible set of initial conditions to the WRF model from 00 UTC which was marched in time till 06th NOV 0730 UTC. The above-mentioned hydrometeors from the cloud water and rain water mixing ratios are then estimated for all the ensembles. The Bayesian filter framework technique is then used to determine the conditional probabilities of all the candidates in the ensemble by comparing the retrieved hydrometeors through measured TRMM radiances with the model simulated hydrometeors. Based on the posterior probability density function, the initial conditions at 06 00 UTC are then corrected using a linear weighted average of initial ensembles for the all prognostic variables. With these weighted average initial conditions, the WRF model has been run up to 08th Nov 06 UTC and the predictions are then compared with observations and the control run. An ensemble independence study was conducted on the basis of which, an optimum of 25 ensembles is arrived at. With the optimum ensemble size, the sensitivity of prognostic variables was also analyzed. The model simulated track when compared with that obtained with the corrected set of initial conditions gives better results than the control run. The algorithm can improve track prediction up to 35 % for a 24 h forecast and up to 12 % for a 54 h forecast.     

An HWRF-based ensemble assessment of the land surface feedback on the post-landfall intensification of Tropical Storm Fay (2008)

While tropical cyclones (TCs) usually decay after landfall, Tropical Storm Fay (2008) initially developed a storm central eye over South Florida by anomalous intensification overland. Unique to the Florida peninsula are Lake Okeechobee and the Everglades, which may have provided a surface feedback as the TC tracked near these features around the time of peak intensity. Analysis is done with the use of an ensemble model-based approach with the Developmental Testbed Center (DTC) version of the Hurricane WRF (HWRF) model using an outer domain and a storm-centered moving nest with 27- and 9-km grid spacing, respectively. Choice of land surface parameterization and small-scale surface features may influence TC structure, dictate the rate of TC decay, and even the anomalous intensification after landfall in model experiments. Results indicate that the HWRF model track and intensity forecasts are sensitive to three features in the model framework: land surface parameterization, initial boundary conditions, and the choice of planetary boundary layer (PBL) scheme. Land surface parameterizations such as the Geophysical Fluid Dynamics Laboratory (GFDL) Slab and Noah land surface models (LSMs) dominate the changes in storm track, while initial conditions and PBL schemes cause the largest changes in the TC intensity overland. Land surface heterogeneity in Florida from removing surface features in model simulations shows a small role in the forecast intensity change with no substantial alterations to TC track.     

Prediction of severe tropical cyclones over the Bay of Bengal during 2007–2010 using high-resolution mesoscale model

In this paper, the performance of a high-resolution mesoscale model for the prediction of severe tropical cyclones over the Bay of Bengal during 2007?C2010 (Sidr, Nargis, Aila, and Laila) is discussed. The advanced Weather Research Forecast (WRF) modeling system (ARW core) is used with a combination of Yonsei University PBL schemes, Kain-Fritsch cumulus parameterization, and Ferrier cloud microphysics schemes for the simulations. The initial and boundary conditions for the simulations are derived from global operational analysis and forecast products of the National Center for Environmental Prediction-Global Forecast System (NCEP-GFS) available at 1°lon/lat resolution. The simulation results of the extreme weather parameters such as heavy rainfall, strong wind and track of those four severe cyclones, are critically evaluated and discussed by comparing with the Joint Typhoon Warning Center (JTWC) estimated values. The simulations of the cyclones reveal that the cyclone track, intensity, and time of landfall are reasonably well simulated by the model. The mean track error at the time of landfall of the cyclone is 98?km, in which the minimum error was found to be for the cyclone Nargis (22?km) and maximum error for the cyclone Laila (304?km). The landfall time of all the cyclones is also fairly simulated by the model. The distribution and intensity of rainfall are well simulated by the model as well and were comparable with the TRMM estimates.     

Real-time prediction of a severe cyclone ��Jal�� over Bay of Bengal using a high-resolution mesoscale model WRF (ARW)

Real-time predictions for the JAL severe cyclone formed in November 2010 over Bay of Bengal using a high-resolution Weather Research and Forecasting (WRF ARW) mesoscale model are presented. The predictions are evaluated with different initial conditions and assimilation of observations. The model is configured with two-way interactive nested domains and with fine resolution of 9?km for the region covering the Bay of Bengal. Simulations are performed with NCEP GFS 0.5° analysis and forecasts for initial/boundary conditions. To examine the impact of initial conditions on the forecasts, eleven real-time numerical experiments are conducted with model integration starting at 00, 06, 12, 18 UTC 4 Nov, 5?Nov and 00, 06, 12 UTC 6 Nov and all ending at 00 UTC 8 Nov. Results indicated that experiments starting prior to 18 UTC 04 Nov produced faster moving cyclones with higher intensity relative to the IMD estimates. The experiments with initial time at 18 UTC 04 Nov, 00 UTC 05 Nov and with integration length of 78?h and 72?h produced best prediction comparable with IMD estimates of the cyclone track and intensity parameters. To study the impact of observational assimilation on the model predictions FDDA, grid nudging is performed separately using (1) land-based automated weather stations (FDDAAWS), (2) MODIS temperature and humidity profiles (FDDAMODIS), and (3) ASCAT and OCEANSAT wind vectors (FDDAASCAT). These experiments reduced the pre-deepening period of the storm by 12?h and produced an early intensification. While the assimilation of AWS data has shown meagre impact on intensity, the assimilation of scatterometer winds produced an intermittent drop in intensity in the peak stage. The experiments FDDAMODIS and FDDAQSCAT produced minimum error in track and intensity estimates for a 90-h prediction of the storm.     

Intensity forecast of tropical cyclones over North Indian Ocean using multilayer perceptron model: skill and performance verification

The coastal regions of India are profoundly affected by tropical cyclones during both pre- and post-monsoon seasons with enormous loss of life and property leading to natural disasters. The endeavour of the present study is to forecast the intensity of the tropical cyclones that prevail over Arabian Sea and Bay of Bengal of North Indian Ocean (NIO). A multilayer perceptron (MLP) model is developed for the purpose and compared the forecast through MLP model with other neural network and statistical models to assess the forecast skill and performances of MLP model. The central pressure, maximum sustained surface wind speed, pressure drop, total ozone column and sea surface temperature are taken to form the input matrix of the models. The target output is the intensity of the tropical cyclones as per the T??number. The result of the study reveals that the forecast error with MLP model is minimum (4.70?%) whereas the forecast error with radial basis function network (RBFN) is observed to be 14.62?%. The prediction with statistical multiple linear regression and ordinary linear regression are observed to be 9.15 and 9.8?%, respectively. The models provide the forecast beyond 72?h taking care of the change in intensity at every 3-h interval. The performance of MLP model is tested for severe and very severe cyclonic storms like Mala (2006), Sidr (2007), Nargis (2008), Aila (2009), Laila (2010) and Phet (2010). The forecast errors with MLP model for the said cyclones are also observed to be considerably less. Thus, MLP model in forecasting the intensity of tropical cyclones over NIOs may thus be considered to be an alternative of the conventional operational forecast models.     

Track prediction of Indian Ocean cyclones using Lagrangian advection model

A new model has been developed for track prediction of Indian Ocean cyclones. The model utilizes environmental steering flow using the forecasts from a high-resolution global model and the effect due to earth??s rotation (the beta-effect) to determine the future movement of cyclone. A new approach based on vertical profile of potential vorticity is used to determine weights for different vertical levels for computation of mean steering current. Despite the fact that the model is based on the dynamical framework, the operational cost and time for running the model is only a fraction of what is needed by a normal numerical weather prediction model. This new approach will enhance flexibility in defining the initial position of the cyclone in the model, and also, it is possible to create a large ensemble of predicted tracks to assess the impact of the uncertainty of initial cyclone position on the predicted tracks. The performance of the model for ten cyclones, viz. GONU (02?C08 Jun, 2007), SIDR (11?C16 November, 2007), NARGIS (27 Apr?C04 May, 2008), RASHMI (25?C27 October, 2008) KHAI-MUK (14?C16 November, 2008), NISHA (25?C27 November, 2008), SEVEN (04?C08 December, 2008), BIJLI (14?C18 April, 2009), AILA (23?C26 May, 2009), and PHYAN (09?C11 November, 2009), have been tested in the present study. The forecast errors of the present model have been computed with respect to the Joint Typhoon Warning Center best track analysis positions. The forecast skill improvement (mean of ten cyclones) of the model with respect to the Climatology and Persistence (CLIPER) statistical model varies from 7 to 67?% between 12 and 72?h.     

Evaluation of the weather research and forecasting (WRF) model over Guyana

In the present study, diagnostic studies were undertaken using station-based rainfall data sets of selected stations of Guyana to understand the variability of rainfall. The multidecadal variation in rainfall of coastal station Georgetown and inland station Timehri has shown that the rainfall variability was less during the May–July (20–30%) of primary wet season compared to the December--January (60–70%) of second wet season. The rainfall analysis of Georgetown based on data series from 1916 to 2007 shows that El Niño/La Niña has direct relation with monthly mean rainfall of Guyana. The impact is more predominant during the second wet season December--January. A high-resolution Weather Research and Forecasting model was made operational to generate real-time forecasts up to 84 h based on 00 UTC global forecast system (GFS), NCEP initial condition. The model real-time rainfall forecast during July 2010 evaluation has shown a reasonable skill of the forecast model in predicting the heavy rainfall events and major circulation features for day-to-day operational forecast guidance. In addition to the operational experimental forecast, as part of model validation, a few sensitivity experiments are also conducted with the combination of two cloud cumulus (Kain--Fritsch (KF) and Betts–Miller–Janjic (BMJ)) and three microphysical schemes (Ferrier et al. WSM-3 simple ice scheme and Lin et al.) for heavy rainfall event occurred during 28–30 May 2010 over coastal Guyana and tropical Hurricane ‘EARL’ formed during 25 August–04 September 2010 over east Caribbean Sea. It was observed that there are major differences in the simulations of heavy rainfall event among the cumulus schemes, in spite of using the same initial and boundary conditions and model configuration. Overall, it was observed that the combination of BMJ and WSM-3 has shown qualitatively close to the observed heavy rainfall event even though the predicted amounts are less. In the case of tropical Hurricane ‘EARL’, the forecast track in all the six experiments based on 00 UTC of 28 August 2010 initial conditions for the forecast up to 84 h has shown that the combination of KF cumulus and Ferrier microphysics scheme has shown less track errors compared to other combinations. The overall average position errors for all the six experiments taken together work out to 103 km in 24, 199 km in 48, 197 km in 72 and 174 km in 84 h.     

Mesoscale model forecast verification during monsoon 2008

There have been very few mesoscale modelling studies of the Indian monsoon, with focus on the verification and intercomparison of the operational real time forecasts. With the exception of Das et al (2008), most of the studies in the literature are either the case studies of tropical cyclones and thunderstorms or the sensitivity studies involving physical parameterization or climate simulation studies. Almost all the studies are based on either National Center for Environmental Prediction (NCEP), USA, final analysis fields (NCEP FNL) or the reanalysis data used as initial and lateral boundary conditions for driving the mesoscale model.     

On the role of the Planetary Boundary Layer in the numerical simulation of a severe cyclonic storm Nargis using a mesoscale model

The very severe cyclonic storm Nargis of 2008 was a strong tropical cyclone that caused the deadliest natural disaster in the history of Myanmar. The time tested NCAR/PSU MM5 model has been used to simulate the Nargis cyclone, which is designed to have two domains covering the Bay of Bengal with horizontal resolutions of 90 and 30?km. The physics options chosen are Kain?CFritsch 2 for convection, Blackadar (BLA), Burk?CThompson, medium range forecast (MRF), Eta Mellor?CYamada (Eta MY) and Gayno?CSeaman (GS) for Planetary Boundary Layer (PBL) and Simple Ice for explicit cloud physics processes. The experiment was conducted with the model integration starting from April 27, 2008, to May 3, 2008. The performance of the five PBL schemes is evaluated in terms of radius height cross-section of the three component winds, surface heat fluxes of sensible heat and latent heat, equivalent potential temperature (?? _e ), precipitation, track and variation of Central Surface Pressure and wind speed with time. The numerical results show a large impact of the PBL schemes on the intensity and movement of the system. The intensity of the storm is examined in terms of pressure drop, strength of the surface wind and rainfall associated with the storm. The results are compared to the India Meteorological Department observations. These experiments indicate that the intensity of the storm is well simulated with the Eta MY and BLA with finer resolution. The simulated track with MRF compared well with the Joint Typhoon Warning Center observation at landfall position both with the 90 and 30?km resolutions.     

Simulation of Orissa Super Cyclone (1999) using PSU/NCAR Mesoscale Model

In this study a non-hydrostatic version of Penn State University (PSU) -- NationalCenter for Atmospheric Research (NCAR) mesoscale model is used to simulate thesuper cyclonic storm that crossed Orissa coast on 29 October 1999. The model isintegrated up to 123 h for producing 5-day forecast of the storm. Several importantfields including sea level pressure, horizontal wind and rainfall are compared with theverification analysis/observation to examine the performance of the model. The modelsimulated track of the cyclone is compared with the best-fit track obtained from IndiaMeteorological Department (IMD) and the track obtained from NCEP/NCAR reanalysis. The model is found to perform reasonably well in simulating the track and in particular, the intensity of the storm.     

Assimilation of Indian radar data with ADAS and 3DVAR techniques for simulation of a small-scale tropical cyclone using ARPS model

The center for Analysis and Prediction of Storms (CAPS) has developed a radar data assimilation system. The system consists of several principal components: (1) a program that quality-controls and remaps (or super-ob) radar data to the analysis grid, (2) a Bratseth analysis method (ADAS), or a 3DVAR method for analyzing all the data except for clouds and precipitation, (3) a cloud and hydrometer analysis package that applies diabetic adjustments to the temperature field, and (4) a non-hydrostatic forecast model named ARPS. In this study, the system is applied to a small cyclone named OGNI, which formed over Bay of Bengal, India during the last week of October 2006. Three experiments are carried out to test the impact of the radar data from Chennai, India. These experiments include (1) using NCEP GFS data to initialize the ARPS model (2) using initial and boundary condition produced from the ADAS and the cloud analysis, (3) using initial and boundary condition produced from the 3DVAR and cloud analysis. The inter-comparison of results reveals that the experiment with the 3DVAR assimilation technique produces more realistic forecast to capture the genesis, structure, and northward movement of the cyclone in the short-range time scale.