Seismic hazard assessment of the city of Hamedan and its vicinity, west of Iran

This article presents the results of deterministic and probabilistic seismic hazard analyses (DSHA and PSHA) of the city of Hamedan and its neighboring regions. This historical city is one of the developing cities located in the west of Iran. For this reason, the DSHA and PSHA approaches have been used for the assessment of seismic hazards and earthquake risk evaluation. To this purpose, analyses have been carried out considering the historic and instrumented earthquakes, geologic and seismotectonic parameters of the region covering a radius of 100?km, keeping Hamedan as the center. Therefore, in this research, we studied the main faults and fault zones in the study area and calculated the length and distance of faults from the center of Hamedan. In the next step, we measured the maximum credible earthquake (MCE) and peak ground acceleration (PGA) using both DSHA and PSHA approaches and utilized the various equations introduced by different researchers for this purpose. The results of DSHA approach show that the MCE-evaluated value is 7.2 Richter, which might be created by Nahavand fault activities in this region. The PGA value of 0.56?g will be obtained from Keshin fault. The results of PSHA approach show that the MCE-evaluated value is 7.6 Richter for a 0.64 probability in a 50-year period. The PGA value of 0.45?g will be obtained from Keshin fault. Seismic hazard parameters have been evaluated considering the available earthquake data using Gutenberg?CRichter relationship method. The ??a?? and ??b?? parameters were estimated 5.53 and 0.68, respectively.     

Ground motion studies for microzonation in Iran

An important step in effectively reducing seismic risk and the vulnerability of a city located in an earthquake prone area is to conduct a ground motion microzonation study for the desired return period. The International Institute of Earthquake Engineering and Seismology (IIEES) initiated a number of seismic microzonation projects for Iran. This paper presents the steps followed by IIEES in ground motion microzonation. IIEES performs both probabilistic and deterministic seismic hazard analysis. IIEES uses his own fault map for seismotectonic studies and develops modulus and damping curves for the soils in the study area. The experience of ground motion microzonation shows that in almost all cases, the estimated 475-year peak ground acceleration (PGA) values are higher than the PGA proposed by the Iranian seismic code. Although ground motion microzonation in Iran has some shortcomings, IIEES is making new improvement. This includes development in deterministic seismic hazard analysis, two-dimensional and three-dimensional modelling of basin and topographical effects, using microtremor measurements to find shear-wave velocity profiles in high-density urban areas and providing maps for spectral acceleration in the study area.     

Probabilistic seismic hazard analysis for Bangalore

This article presents the results of probabilistic seismic hazard analysis (PSHA) for Bangalore, South India. Analyses have been carried out considering the seismotectonic parameters of the region covering a radius of 350 km keeping Bangalore as the center. Seismic hazard parameter ‘b’ has been evaluated considering the available earthquake data using (1) Gutenberg–Richter (G–R) relationship and (2) Kijko and Sellevoll (1989, 1992) method utilizing extreme and complete catalogs. The ‘b’ parameter was estimated to be 0.62 to 0.98 from G–R relation and 0.87 ± 0.03 from Kijko and Sellevoll method. The results obtained are a little higher than the ‘b’ values published earlier for southern India. Further, probabilistic seismic hazard analysis for Bangalore region has been carried out considering six seismogenic sources. From the analysis, mean annual rate of exceedance and cumulative probability hazard curve for peak ground acceleration (PGA) and spectral acceleration (Sa) have been generated. The quantified hazard values in terms of the rock level peak ground acceleration (PGA) are mapped for 10% probability of exceedance in 50 years on a grid size of 0.5 km × 0.5 km. In addition, Uniform Hazard Response Spectrum (UHRS) at rock level is also developed for the 5% damping corresponding to 10% probability of exceedance in 50 years. The peak ground acceleration (PGA) value of 0.121 g obtained from the present investigation is slightly lower (but comparable) than the PGA values obtained from the deterministic seismic hazard analysis (DSHA) for the same area. However, the PGA value obtained in the current investigation is higher than PGA values reported in the global seismic hazard assessment program (GSHAP) maps of Bhatia et al. (1999) for the shield area.     

Seismic hazard map of Coimbatore using subsurface fault rupture

This study presents the future seismic hazard map of Coimbatore city, India, by considering rupture phenomenon. Seismotectonic map for Coimbatore has been generated using past earthquakes and seismic sources within 300 km radius around the city. The region experienced a largest earthquake of moment magnitude 6.3 in 1900. Available earthquakes are divided into two categories: one includes events having moment magnitude of 5.0 and above, i.e., damaging earthquakes in the region and the other includes the remaining, i.e., minor earthquakes. Subsurface rupture character of the region has been established by considering the damaging earthquakes and total length of seismic source. Magnitudes of each source are estimated by assuming the subsurface rupture length in terms of percentage of total length of sources and matched with reported earthquake. Estimated magnitudes match well with the reported earthquakes for a RLD of 5.2% of the total length of source. Zone of influence circles is also marked in the seismotectonic map by considering subsurface rupture length of fault associated with these earthquakes. As earthquakes relive strain energy that builds up on faults, it is assumed that all the earthquakes close to damaging earthquake have released the entire strain energy and it would take some time for the rebuilding of strain energy to cause a similar earthquake in the same location/fault. Area free from influence circles has potential for future earthquake, if there is seismogenic source and minor earthquake in the last 20 years. Based on this rupture phenomenon, eight probable locations have been identified and these locations might have the potential for the future earthquakes. Characteristic earthquake moment magnitude (M _w ) of 6.4 is estimated for the seismic study area considering seismic sources close to probable zones and 15% increased regional rupture character. The city is divided into several grid points at spacing of 0.01° and the peak ground acceleration (PGA) due to each probable earthquake is calculated at every grid point in city by using the regional attenuation model. The maximum of all these eight PGAs is taken for each grid point and the final PGA map is arrived. This map is compared to the PGA map developed based on the conventional deterministic seismic hazard analysis (DSHA) approach. The probable future rupture earthquakes gave less PGA than that of DSHA approach. The occurrence of any earthquake may be expected in near future in these eight zones, as these eight places have been experiencing minor earthquakes and are located in well-defined seismogenic sources.     

Deterministic seismic microzonation of Kolkata city

This paper presents the deterministic seismic microzonation of densely populated Kolkata city situated on the world’s largest delta island with very soft and thick soil deposit in the surficial layers. A fourth-order accurate staggered-grid finite-difference algorithm for SH-wave propagation simulation in visco-elastic medium is used for the linear computation of ground motion amplifications in sedimentary deposit. Different maps such as for fundamental frequency (F ₀), peak ground acceleration (PGA), peak ground velocity, and peak ground displacement are developed for variety of end-users communities, including structural and geotechnical engineers for performance-based designs, building officials, emergency managers, land-use planners, private businesses, and the general public. The scenario of simulated amplification factors in the different frequency bands revealed that the Kolkata city is very much prone to severe damage even during a moderate earthquake and very selective damage may occur at some of the localities during local and distant earthquakes. The deterministically predicted PGA at bedrock level is 0.0844 g and the maximum PGA predicted at the free surface is 0.6 g in Kolkata city due to maximum credible earthquake (M _w = 5.4) associated with Eocene Hinge Zone at a depth of 36 km. The seismic microzonation of Kolkata city reveals that the Nager Bazar and Nimtala areas are the safest regions with earthquake point of view.     

香港地区地震风险评价和设防区划

香港地区隶属于中国板内地震区中的东南沿海块缘地震带。港-九块体为晚中生代至早第三纪以来以持续稳定上升为主的块体, 块体活动性明显地低于其周边相对下沉的中新生代盆地。为此, 赋予港-九块体为最大可信震级M=5.5级潜在震源区, 而其周边中新生代断陷盆地则为最大可信震级M6.0潜在震源。从大陆地震构造成因的环境、潜在震源可信震级范围M=5.0～7.5和近源地震动饱和等三个方面的可比性, 结合中国大陆地震震源破裂尺度和地震烈度影响场, 所建立的反映中国地震构造和震源破裂及地震烈度影响场特点的PGA和反应谱地震动衰减预测关系式可用于香港地区。以50%概率时的中值对中国强震记录的对比, 本研究所提供的经验期望预测关系式, 能包络实际的资料。因此, 用此地震动衰减预测模式对香港地区地震危险性进行评估, 将会得到相对保守地震动预测值。通过香港地区基岩地震动危险性分析和计算, 参照中国大陆地震设防标准, 进行了基岩设计参数确定和区划。以年概率P=0.02、P=0.002、P=0.0004三个概率标准, 对应的地震动重复周期大约分别约为50a, 500a, 2500a的基岩PGA和反应谱, 作为香港地区基岩上构筑物和建筑物可选的基     

Hybrid attenuation model for estimation of peak ground accelerations in the Kutch region, India

The Kutch region of Gujarat in India is the locale of one of the most devastating earthquake of magnitude (M _w) 7.7, which occurred on January 26, 2001. Though, the region is considered as seismically active region, very few strong motion records are available in this region. First part of this paper uses available data of strong motion earthquakes recorded in this region between 2006 and 2008 years to prepare attenuation relation. The developed attenuation relation is further used to prepare synthetic strong motion records of large magnitude earthquakes using semiempirical simulation technique. Semiempirical simulation technique uses attenuation relation to simulate strong ground motion records of any target earthquake. The database of peak ground acceleration obtained from simulated records is used together with database of peak ground acceleration obtained from observed record to develop following hybrid attenuation model of wide applicability in the Kutch region: $$ \begin{aligned} \ln \left( {\text{PGA}} \right) & = - 2.56 + 1.17 \, M_{\text{w}} - \, 0.015R - 0.0001\ln \left( {E + 15} \right) \\ &\quad 3.0 \le M_{\text{w}} \le 8.2;\quad 12 \le R \le 120;\quad {\text{std}} . {\text{ dev}}.(\sigma ): \pm 0.5 \\ \end{aligned} $$ ln ( PGA ) = ? 2.56 + 1.17 M w ? 0.015 R ? 0.0001 ln ( E + 15 ) 3.0 ≤ M w ≤ 8.2 ; 12 ≤ R ≤ 120 ; std . dev . ( σ ) : ± 0.5 In the above equation, PGA is maximum horizontal ground acceleration in gal, M _w is moment magnitude of earthquake, R is hypocentral distance, and E is epicentral distance in km. The standard deviation of residual of error in this relation is 0.5. This relation is compared with other available relations in this region, and it is seen that developed relation gives minimum root mean square error in comparison with observed and calculated peak ground acceleration from same data set. The applicability of developed relation is further checked by testing it with the observed peak ground acceleration from earthquakes of magnitude (M _w), 3.6, 4.0, 4.4, and 7.7, respectively, which are not included in the database used for regression analysis. The comparison demonstrates the efficacy of developed hybrid attenuation model for calculating peak ground acceleration values in the Kutch region.     

Seismic Hazard Assessment of District Mansehra,Khyber Pakhtoonkhawa,Pakistan

The site of Mansehra is located seismically in an active regime, known as the Crystalline Nappe Zone and Hazara-Kashmir Syntaxis in NW Himalayas, Pakistan. Seismic Hazard Assessment （SHA） for the site has been carried out by considering the earthquake source zones, selection of appropriate attenuation equations, near fault effects and maximum potential magnitude estimation. The Mansehra Thrust, Oghi Fault, Banna Thrust, Balakot Shear Zone, Main Boundary Thrust, Panjal Thrust, Jhelum Fault and Muzaffarabad Fault and, further to the south, the Sanghargali, Nathiagali, and Thandiani Thrusts are the most critical tectonic features within the 50 km radius of Mansehra. Using the available instrumental seismological data from 1904 to 2007, SHA has been carried out. Other reactivated critical tectonic features in the area have been investigated. Among them the Balakot-Bagh fault, with the fault length of 120 km from Balakot to Poonch, has been considered as the most critical tectonic feature on the basis of geological/structural/seismological data. The potential earthquake of maximum magnitude 7.8 has been assigned to the Balakot-Bagh fault using four regression relations. The peak ground acceleration value of 0.25 g （10% probability of exceedance for 50 years） and 0.5 g has been calculated with the help of the attenuation equation using probabilistic and deterministic approaches.     

Region-specific deterministic and probabilistic seismic hazard analysis of Kanpur city

A seismic hazard map of Kanpur city has been developed considering the region-specific seismotectonic parameters within a 500-km radius by deterministic and probabilistic approaches. The maximum probable earthquake magnitude (M _max) for each seismic source has been estimated by considering the regional rupture characteristics method and has been compared with the maximum magnitude observed \(\left ({M_{\max }^{\text {obs}}}\right )\), \(M_{\max }^{\text {obs}} +0.5\) and Kijko method. The best suitable ground motion prediction equations (GMPE) were selected from 27 applicable GMPEs based on the ‘efficacy test’. Furthermore, different weight factors were assigned to different M _max values and the selected GMPE to calculate the final hazard value. Peak ground acceleration and spectral acceleration at 0.2 and 1 s were estimated and mapped for worst-case scenario and 2 and 10% probability of exceedance for 50 years. Peak ground acceleration (PGA) showed a variation from 0.04 to 0.36 g for DSHA, from 0.02 to 0.32 g and 0.092 to 0.1525 g for 2 and 10% probability in 50 years, respectively. A normalised site-specific design spectrum has been developed considering three vulnerable sources based on deaggregation at the city center and the results are compared with the recent 2011 Sikkim and 2015 Nepal earthquakes, and the Indian seismic code IS 1893.     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

Seismic hazard across Bulgaria and neighbouring areas: regional and site-specific maximum credible magnitudes and earthquake perceptibility

A probabilistic seismic hazard assessment is developed here using maximum credible earthquake magnitude statistics and earthquake perceptibility hazard. Earthquake perceptibility hazard is defined as the probability a site perceives ground shaking equal to or greater than a selected ground motion level X, resulting from an earthquake of magnitude M, and develops estimates for the most perceptible earthquake magnitude, M _P(max). Realistic and usable maximum magnitude statistics are obtained from both whole process and part process statistical recurrence models. These approaches are extended to develop relationships between perceptible earthquake magnitude hazard and maximum magnitude recurrence models that are governed by asymptotic and finite return period properties, respectively. Integrated perceptibility curves illustrating the probability of a specific level of perceptible ground motion due to all earthquakes over the magnitude range extending from ?∞ to a magnitude M _i are then developed from reviewing site-specific magnitude perceptibility. These lead on to achieving site-specific annual probability of exceedance hazard curves for the example cities of Sofia and Thessaloniki for both horizontal ground acceleration and ground velocity. Both the maximum credible earthquake magnitude M ₃ and the most perceptible earthquake magnitude M _P(max) are of importance to the earthquake engineer when approaching anti-seismic building design. Both forms of hazard are illustrated using contoured hazard maps for the region bounded by 39°–45°N, 19°–29°E. Patterns are observed for these magnitude hazard estimates—especially M _P(max) specific to horizontal ground acceleration and horizontal ground velocity—and compared to inferred patterns of crustal deformation across the region. The full geographic region considered is estimated to be subject to a maximum credible earthquake magnitude M ₃—estimated using cumulative seismic moment release statistics—of 7.53 M _w, calculated from the full content of the adopted earthquake catalogue, while Bulgaria’s capital, Sofia, is estimated a comparable value of 7.36 M _w. Sofia is also forecast most perceptible earthquake magnitudes for the lowest levels considered for horizontal ground acceleration of M _PA(50) = 7.20 M _w and horizontal ground velocity of M _PV(5) = 7.23 M _w for a specimen focal depth of 15 km.     

Sensitivity analysis of seismic hazard for the northwestern portion of the state of Gujarat, India

We test the sensitivity of seismic hazard to three fault source models for the northwestern portion of Gujarat, India. The models incorporate different characteristic earthquake magnitudes on three faults with individual recurrence intervals of either 800 or 1600 years. These recurrence intervals imply that large earthquakes occur on one of these faults every 266–533 years, similar to the rate of historic large earthquakes in this region during the past two centuries and for earthquakes in intraplate environments like the New Madrid region in the central United States. If one assumes a recurrence interval of 800 years for large earthquakes on each of three local faults, the peak ground accelerations (PGA; horizontal) and 1-Hz spectral acceleration ground motions (5% damping) are greater than 1 g over a broad region for a 2% probability of exceedance in 50 years' hazard level. These probabilistic PGAs at this hazard level are similar to median deterministic ground motions. The PGAs for 10% in 50 years' hazard level are considerably lower, generally ranging between 0.2 g and 0.7 g across northwestern Gujarat. Ground motions calculated from our models that consider fault interevent times of 800 years are considerably higher than other published models even though they imply similar recurrence intervals. These higher ground motions are mainly caused by the application of intraplate attenuation relations, which account for less severe attenuation of seismic waves when compared to the crustal interplate relations used in these previous studies. For sites in Bhuj and Ahmedabad, magnitude (M) 7 3/4 earthquakes contribute most to the PGA and the 0.2- and 1-s spectral acceleration ground motion maps at the two considered hazard levels.     

Seismic microzonation of Bangalore,India

In the present study, an attempt has been made to evaluate the seismic hazard considering local site effects by carrying out detailed geotechnical and geophysical site characterization in Bangalore, India to develop microzonation maps. An area of 220 km², encompassing Bangalore Mahanagara Palike (BMP) has been chosen as the study area. Seismic hazard analysis and microzonation of Bangalore are addressed in three parts: in the first part, estimation of seismic hazard is done using seismotectonic and geological information. Second part deals with site characterization using geotechnical and shallow geophysical techniques. In the last part, local site effects are assessed by carrying out one-dimensional (1-D) ground response analysis (using the program SHAKE2000) using both standard penetration test (SPT) data and shear wave velocity data from multichannel analysis of surface wave (MASW) survey. Further, field experiments using microtremor studies have also been carried out for evaluation of predominant frequency of the soil columns. The same has been assessed using 1-D ground response analysis and compared with microtremor results. Further, the Seed and Idriss simplified approach has been adopted to evaluate the soil liquefaction susceptibility and liquefaction resistance assessment. Microzonation maps have been prepared with a scale of 1:20,000. The detailed methodology, along with experimental details, collated data, results and maps are presented in this paper.     

Global Attenuation Relationship for Estimating Peak Ground Acceleration

Peak Ground Acceleration (PGA) is a very important ground motion parameter which is used to define the degree of ground shaking during an earthquake. It is also very helpful for designing earthquake resistant structure. The PGA can be estimated by attenuation relationships using magnitude, distance, source type etc of a ground motion. In the past, several researchers have developed over 450 attenuation relationships for predicting PGA for a specific region. In the present study an attempt has been made to develop an attenuation relationship on the basis of these available previous relationships in rock site which will be applicable for any region of the world. In the present study, PGA has been expressed as a function of moment magnitude and hypo-central distance in rock site. Chi-square test have also been performed with available earthquake data in American and Indian region for verifying the accuracy of the generated attenuation relationship. Using multiple regression and Genetic Algorithm (GA) the attenuation relationship equations have also been generated. These equations will be very helpful for performing seismic hazard analysis and predicting earthquake force in any region of the world.     

Strong ground motion attenuation in Aswan area, Egypt

Recent and paleo seismicity indicate that moderate seismic activity is relatively large for Aswan area. This is a warning on the possibility of occurrence of earthquakes in the future too. No strong motion records are available in Aswan area for engineers to rely upon. Consequently, the seismological modeling is an alternative approach till sufficient instrumental records around Aswan become available. In the present study, we have developed new ground motion attenuation relationship for events spanning 4.0?≤? M _w?≤?7.0 and distance to the surface projection of the fault up to 100 km for Aswan based on a statistically simulated seismological model. We generated suites of ground motion time histories using stochastic technique. The ground motion attenuation relation describes the dependence of the strength of the ground motions on the earthquake magnitude and distance from the earthquake. The proposed equation for peak ground acceleration (PGA) for the bed rock is in the form of: $ {\mathbf{log}}{\text{ }}\left( {{\mathbf{PGA}}/{\mathbf{gal}}} \right){\text{ }} = {\mathbf{1}}.{\mathbf{24}} + {\mathbf{0}}.{\mathbf{358}}{M_{\mathbf{w}}} - {\text{ }}{\mathbf{log}}\left( {\mathbf{R}} \right){\text{ }}-{\text{ }}{\mathbf{0}}.{\mathbf{008}}{\text{ }}{\mathbf{R}}{\text{ }} + {\text{ }}{\mathbf{0}}.{\mathbf{22}}{\text{ }}{\mathbf{P}} $ . Where PGA is the peak ground acceleration in gal (cm/s²); M_w, its moment magnitude; R is the closest distance between the rupture projection and the site of interest; and the factor P is a dummy variable. It is observed that attenuation of strong motion in Aswan is correlated with those used before in Egypt.     

On the problem of destructive Iranian earthquakes and their causative faults

This article is devoted to evaluating destructive earthquakes (magnitude >6) of Iran and determining properties of their source parameters. First of all, a database of documented earthquakes has been prepared via reliable references and causative faults of each event have been determined. Then, geometric parameters of each fault have been presented completely. Critical parameters such as Maximum Credible Rupture, MCR, and Maximum Credible Earthquake, MCE, have been compiled based on the geometrical parameters of the earthquake faults. The calculated parameters have been compared to the maximum earthquake and the surface rupture which have been recorded for the earthquake faults. Also, the distance between the epicenter of documented earthquake events and their causative faults has been calculated (the distance was less than 20 km for 90% of the data). Then, the distance between destructive earthquakes (with the magnitude more than 6) and the nearest active fault has been calculated. If the estimated distance is less than 20 km and the mechanism of the active fault and the event are reported the same, the active fault will be introduced as a probable causative fault of that earthquake. In the process, all of the available geological, tectonic, seismotectonic maps, aerial geophysical data as well as remote sensing images have been evaluated. Based on the quality and importance of earthquake data, the events have been classified into three categories: (1) the earthquakes which have their causative faults documented, (2) the events with magnitude higher than 7, and (3) the events with the magnitude between 6 and 7. For each category, related maps and tables have been compiled and presented. Some important faults and events have been also described throughout the paper. As mentioned in this paper, these faults are likely to be in high seismic regions with potential for large-magnitude events as they are long, deep and bound sectors of the margins characterized by different deformation and coupling rates on the plate interface.     

Probabilistic seismic hazard analysis for Kakrapar atomic power station, Gujarat, India

Seismic ground motion caused by earthquakes mainly affects the constructions and structures around its area of influence. In this context, the probabilistic seismic hazard analysis (PSHA) is a scientific step towards the safety analysis of any major construction such as nuclear power plant. Thus, the present study focused to estimate seismic hazard level at different probabilities for Kakrapar nuclear power plant located in the Western India. The hazard curves for the study area are developed following the procedure of PSHA suggested by Cornell–McGuire. Three source zones, Narmada-Tapti zone (NTZ), Rann of Kuchchh (ROK), and west passive margin (WPM), are classified on the basis of seismicity and tectonic setting of the study area. The estimated maximum magnitude (m _max) for NTZ, ROK, and WPM are 6.9 ± 0.57, 6.5 ± 0.64, and 6.1 ± 0.64, respectively. Logic tree approach has been used for the development of hazard curves to account the epistemic uncertainties associated with the analysis. For maximum credible earthquake [MCE, i.e., the probability of exceedance of 2 % in 50 years (return period of ~2,500 years)], the peak spectral acceleration (i.e., PSA at 0.2 s) expected around 5 km of the Kakrapar nuclear power plant (site) is 0.23 g from all source zones; however, at exact site location, it is 0.18 g. The PSA values due to NTZ, ROK, and WPM based on MCE are 0.22, 0.065, and 0.052 g, respectively. In case of design-based earthquake (DBE, i.e., 50 % probability in 50 years (return period of ~110 years)), the calculated maximum spectral acceleration (SA) from all source zones is about 0.045 g. The PSA distribution for the DBE from the NTZ has reached a maximum value of 0.042 g; however, PSA for ROK and WPM is considerably low with a maximum value of 0.022 and 0.021 g, respectively. Considering the MCE and DBE, the estimated PSA at 0.2 s has a highest value of ~0.23 g from all source zones. Spectral accelerations (SAs) correspond to different periods are presented, and SA plots for NTZ zone can be considered as response spectra for the KAPS site. Deaggregation of PSHA in the present study is also discussed. PGA values reported in seismic zonation map and global seismic hazard analysis program around the present study area range from 0.05 to 0.2 g which is slightly lower than the peak acceleration obtained in this study. The results of this study would facilitate in the performance of the site-specific seismic probabilistic safety analysis.     

Analysis of soil effects and distribution of damage from the Pyrgos 1993 (Greece) earthquake

Summary On 26 March, 1993, a moderate magnitude earthquake (M _s=5.5) occurred at 3 km epicentral distance from the town of Pyrgos, in Southern Greece, causing extensive damage to masonry houses. To explain the variability of seismic intensity over the town and to propose measures against future seismic activity, a microzonation study was undertaken which combined geological, geophysical and geotechnical investigations, site specific analyses of seismic ground response and detailed recording of structural damage. The analytical predictions of ground response are correlated to soil conditions and then used to identify (micro-)zones of sites with similar seismic response. Furthermore, they are compared to quantitative estimates of damage distribution over the town. It is concluded that the peak ground acceleration, normalized against the input peak seismic acceleration, is a function of the local soil conditions as well as the seismic excitation characteristics. Hence, it cannot be defined uniquely at a site, without reference to the seismic excitation. However, the normalized peak ground velocity and the acceleration response spectra are mainly functions of the soil conditions and can be used as criteria for the practical definition of (micro-)zones. The distribution of damage in various parts of the town is at least partially attributable to local soil effects. The small epicentral distance of the earthquake, connected with the direction of the fault rupture, as well as the quality and techniques of construction, are additional factors that may have influenced the extent and distribution of damage.     

Probabilistic seismic hazard analysis at a strategic site in the Bay of Bengal

Probabilistic seismic hazard analysis (PSHA) along the route of an offshore pipeline for the transport of oil in the Bay of Bengal has been performed, in order to set up design parameters and identify possible geohazards. The complexity of geological and seismotectonic setting of the region where the pipeline is planned to be installed is the result of the interaction of the Indian, Eurasian and Burmese tectonic plates. In order to properly account for the intricate way by which these plates interact, a large area extending 450 km from the pipeline route has been considered for the compilation of a comprehensive earthquake catalogue, spanning the period 1663–2012 AD. Differently from earlier PSHA analyses conducted in the region based on assuming two-dimensional polygons as seismogenic provinces, this study adopted a seismotectonic source model which also includes for the first time a linear tectonic lineament representing the northward extension of the Sunda mega thrust, responsible for the large Sumatra–Andaman earthquake of 26 December 2004. Hazard computations have been performed over a grid of sites spaced 0.045° covering a rectangular area which contains the pipeline. Epistemic uncertainty in the hazard computations has been taken into account by a logic tree framework, incorporating different seismotectonic source models, maximum cut-off magnitude and ground-motion prediction equations. Horizontal median uniform hazard spectra and median uniform hazard spectra plus and minus one sigma on stiff ground have been calculated at the selected sites for different return periods. Peak ground acceleration with 10 % probability of exceedance in 50 years has been compared with values from previous hazard studies available for Bangladesh.     

Ground motion estimation at Guwahati city for an Mw 8.1 earthquake in the Shillong plateau

In this paper, the ground motion at Guwahati city for an 8.1 magnitude earthquake on Oldham fault in the Shillong plateau has been estimated by stochastic finite-fault simulation method. The corresponding acceleration time histories on rock level at several sites in the epicentral region have been computed. These results are validated by comparing them with the estimates obtained from Medvedev–Sponheuer–Karnik (MSK) intensity observations of 1897 Shillong earthquake. Using the local soil parameters, the simulated rock level acceleration time history at Guwahati city is further amplified up to the ground surface by nonlinear site response analysis. The results obtained are presented in the form of peak ground acceleration (PGA) contour map. The maximum amplification for PGA over Guwahati city is as high as 2.5. Based on the simulated PGA, the liquefaction susceptibility at several locations in the city has been estimated. The results are presented in the form of contours of factor of safety against liquefaction at different depths below the ground surface. It is observed that over a large part of the Guwahati city, the factor of safety against liquefaction is less than one, indicating that the city is highly vulnerable to liquefaction in the event of this earthquake. The contour maps obtained can be used in identifying vulnerable areas and disaster mitigation.