Structural modal parameter identification and damage diagnosis based on Hilbert-Huang transform

Traditional modal parameter identifi cation methods have many disadvantages,especially when used for processing nonlinear and non-stationary signals.In addition,they are usually not able to accurately identify the damping ratio and damage.In this study,methods based on the Hilbert-Huang transform(HHT) are investigated for structural modal parameter identifi cation and damage diagnosis.First,mirror extension and prediction via a radial basis function(RBF) neural network are used to restrain the troublesome end-effect issue in empirical mode decomposition(EMD),which is a crucial part of HHT.Then,the approaches based on HHT combined with other techniques,such as the random decrement technique(RDT),natural excitation technique(NExT) and stochastic subspace identifi cation(SSI),are proposed to identify modal parameters of structures.Furthermore,a damage diagnosis method based on the HHT is also proposed.Time-varying instantaneous frequency and instantaneous energy are used to identify the damage evolution of the structure.The relative amplitude of the Hilbert marginal spectrum is used to identify the damage location of the structure.Finally,acceleration records at gauge points from shaking table testing of a 12-story reinforced concrete frame model are taken to validate the proposed approaches.The results show that the proposed approaches based on HHT for modal parameter identifi cation and damage diagnosis are reliable and practical.     

苏通大桥结构健康状态评估技术研究与应用（3）：主梁损伤定位

为提高基于模态参数的损伤识别方法的损伤敏感性和噪声鲁棒性,将多源数据融合技术引入到苏通大桥主梁损伤定位方法中。基于D-S证据理论对模态柔度和模态应变能指标进行数据融合,并以苏通大桥扁平钢箱梁为分析对象,对融合后损伤定位指标的应用效果进行了讨论。结果表明：基于数据融合的损伤定位方法具有较强的损伤敏感性,只需要较少的低阶模态信息就能识别主梁的早期损伤;数据融合后,损伤定位指标可以在较强的噪声环境下准确地识别斜拉桥钢箱梁的损伤,具有较好的工程实用性。     

环境激励下基于波动能量法的结构损伤识别

目前作为结构健康监测系统核心的损伤识别大多是基于模态参数变化而进行的,但模态参数对局部损坏不敏感,导致损伤识别精度不够。波在结构中的传播状态可以更好地反映局部损伤状况,波动能量可以作为损伤识别的有效指标。为了提高环境激励下结构损伤识别的精度,采用S变换分析了结构输出信号,建立波动能量指标,从而使波动能量指标的使用领域扩展到非平稳信号范围。最后通过三层钢框架试验及弹性分层剪切梁的数值模型对该方法进行了验证,结果表明:该方法不仅能够有效识别结构损伤位置,而且能够识别出损伤程度。     

基于高阶局部模态的弹性地基上框架结构物理参数识别研究

利用框架结构的整体振动模态信息进行局部损伤的判别具有明显的局限性。高阶模态逐渐被人们认识并用来进行局部物理参数识别并用来进行损伤判别。本文以弹性地基上独立基础的框架结构底层柱为研究对象,利用增加的质量块对柱子进行局部损伤的制造,利用脉冲锤击法和激振器扫频实验进行高阶模态对比测试,利用PolyMAX模态分析方法进行损伤前后高阶模态的识别,发现了“高灵敏度高阶模态”的存在。最后通过两端约束Euler梁的计算模型,通过高阶模态来识别物理参数以及地基参数,其中物理参数结果具有较好的可靠性。     

Modeling of environmental influence in structural health assessment for reinforced concrete buildings

One branch of structural health monitoring (SHM) utilizes dynamic response measurements to assess the structural integrity of civil infrastructures. In particular,modal frequency is a widely adopted indicator for structural damage since its square is proportional to structural stiffness. However,it has been demonstrated in various SHM projects that this indicator is substantially affected by fluctuating environmental conditions. In order to provide reliable and consistent information on the health status of the monitored structures,it is necessary to develop a method to filter this interference. This study attempts to model and quantify the environmental influence on the modal frequencies of reinforced concrete buildings. Daily structural response measurements of a twenty-two story reinforced concrete building were collected and analyzed over a one-year period. The Bayesian spectral density approach was utilized to identify the modal frequencies of this building and it was clearly seen that the temperature and humidity fluctuation induced notable variations. A mathematical model was developed to quantify the environmental effects and model complexity was taken into consideration. Based on a Timoshenko beam model,the full model class was constructed and other reduced-order model class candidates were obtained. Then,the Bayesian modal class selection approach was employed to select the one with the most suitable complexity. The proposed model successfully characterizes the environmental influence on the modal frequencies. Furthermore,the estimated uncertainty of the model parameters allows for assessment of the reliability of the prediction. This study not only improves the understanding about the monitored structure,but also establishes a systematic approach for reliable health assessment of reinforced concrete buildings.     

用应变模态技术诊断梁结构的损伤

重点研究损伤对应变模态影响规律及其灵敏程度.根据计算结果,损伤处附近发生突变,损伤30%时突变区为梁长的12.5%.应变模态对非节点损伤非常敏感,应变模态也有明显改变,尤其是跨中损伤第1阶、四分之一跨损伤第3和第2阶.跨中损伤时,1阶应变模态除突变区外大多数应变几乎呈均匀下降趋势.四分之一跨损伤30%时,3阶应变模态第1峰值区及2阶模态第1、第2峰值区应变振型值下降至58.6%、71.9%及84.2%.所以,可利用应变模态的敏感性确定损伤位置和程度.     

Damage identification of a 3D full scale steel–concrete composite structure with partial‐strength joints at different pseudo‐dynamic load levels

Partial‐strength composite steel–concrete moment‐resisting (MR) frame structures represent an open research field in seismic design from both a theoretical and an experimental standpoint. Among experimental techniques, vibration testing is a well‐known and powerful technique for damage detection, localization and quantification, where actual modal parameters of a structure at different states can be determined from test data by using system identification methods. However, the identification of semi‐rigid connections in framed structures is limited, and hence this paper focuses on a series of vibration experiments that were carried out on a realistic MR frame structure, following the application of pseudo‐dynamic and quasi‐static cyclic loadings at the European laboratory for structural assessment of the Joint Research Centre at Ispra, Italy, with the scope of understanding the structural behaviour and identifying changes in the dynamic response. From the forced vibration response, natural frequencies, damping ratios, modal displacements and rotations were extracted using the circle fitting technique. These modal parameters were used for local and global damage identification by updating a 3D finite element model of the intact structure. The identified results were then correlated with observations performed on the structure to understand further the underlying damage mechanisms. Finally, the latin hypercube sampling technique, a variant of the Monte Carlo method, was employed in order to study the sensitivity of the updated parameters of the 3D model to noise on the modal inputs. Copyright © 2009 John Wiley & Sons, Ltd.     

工作状态下梁及桥梁模态与损伤识别的新方法

工作状态下桥梁结构的模态参数识别是桥梁损伤识别的重要环节,考虑桥梁检测的实用性,桥梁检测一般应建立在环境激励的基础上,已有的环境激励下模态参数识别的方法对模态频率的识别的精度较高,而对位移模态的识别则误差较大。提出了一种利用移动质量块在不同位置时对桥梁的模态频率进行多次测量,用各次测得的频率值确定位移模态的新方法,使得位移模态识别的精度接近频率识别的精度,建立了该方法的初步模型,推导了频率与位移模态关系的理论公式,并通过数值模拟对该方法的有效性进行了说明。     

Damage detection of a thin plate using modal curvature via macrostrain measurement

Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural health. Modal curvature-based damage detection techniques have recently garnered considerable attention from the research community, and have become a promising vibration-based structural health monitoring solution. However, computing errors arise when calculating modal curvatures from lateral mode shapes, which result from unavoidable measurement errors in the mode shapes as identified from lateral vibration signals; this makes curvature-based algorithms that use a lateral measurement only theoretically feasible, but practically infeasible. Therefore, in this study, long-gauge fiber Bragg grating strain sensors are employed to obtain a modal curvature without a numerical differentiation procedure in order to circumvent the computing errors. Several damage indices based on modal curvatures that were developed to locate beam damage are employed. Both numerical and experimental studies are performed to validate the proposed approach. However, although previous studies have reported relative success with the application of these damage indices on a simple beam, only one damage index demonstrated the capability to locate damage when the stiffness of the local region changed near the sensor.     

两种识别结构模态参数时域法的对比研究

模态参数是有效评估结构安全状况的关键参数,在结构抗震加固和健康诊断领域得到广泛应用。与频域法相比较,时域法直接利用实测的振动信号识别模态参数,不需要进行频域变换,减少数据处理带来的误差,并且可以实现大型结构的在线识别,真实地反应结构的现状。以同济大学12层钢筋混凝土标准框架振动台模型试验完整数据为对象,在详细介绍ITD法和复指数法2种时域法理论的基础上,通过编程选取结构不同测点的振动加速度时程数据,识别了小震和强震工况下12层钢筋混凝土框架模型振动台试验模型的模态频率和阻尼比,并结合移动谱识别结构模态参数的时变特性。结果表明:ITD法和复指数法可有效地识别结构的模态参数,自振频率的识别精度较高,而阻尼比的离散度较大;小震工况频率变化值不大,而强震工况频率值较初始时刻有明显的下降,这与试验现象是吻合的,进一步说明移动谱与这2种时域法相结合可以反应结构在塑性阶段的参数时变特性。     

微动测试技术在古建筑拱桥结构检测中的应用

在古桥梁建筑结构保护中,无损高精度检测一直是一个重要的研究课题。为识别古桥梁拱桥的结构损伤问题,以上海青浦迎祥桥为研究对象,采用全站仪对桥梁结构的变形进行观测及分析,评价桥梁的变形及受力状态;采用微动测试技术,获取结构的损伤动力特性参数,包括固有频率及振动模态。通过分析现有桥梁的模态分布,观测振动模态的突变位置确定结构损伤位置,比较结构的变形特性,对结构的损伤程度进行评价。     

基于Hilbert-Huang变换的建筑物强震记录分析方法研究

建筑物在强震中可能受到损伤,通过对结构瞬时频率的分析可以诊断出结构的损伤发展过程。本文探讨了基于H ilbert-Huang变换的结构物损伤诊断方法,研究了如何从结构地震响应信号中提取模态响应、1阶模态振型和损伤发展规律。本文采用HHT法分析了Northridge地震中某超高层建筑物的强震记录,分析结果表明:带有间歇检验准则的经验模态分解法能够提取结构的模态振动响应;通过分析不同楼层的相对H ilbert边际谱能够识别出结构的1阶模态振型;分析结构振动中瞬时频率的时变特点,可以直观地掌握振动中结构的损伤发展规律。     

基于应变模态的结构损伤定位方法

针对简支梁的单一位置及其多位置损伤，利用结构有限元分析软件计算得到简支梁的位移模态，再通过应变和位移之间具有一阶导数的关系，对简支梁进行了应变模态分析。结果表明，应变模态对损伤比较敏感而位移模态对损伤不够敏感；当损伤发生在应变模态的节点处时，损伤不易被识别，但是可以结合多阶应变模态进行损伤识别。最后对应变模态法的工程实用性进行了评价。     

Two‐stage damage detection algorithms of structure using modal parameters identified from recursive subspace identification

Structural damage assessment under external loading, such as earthquake excitation, is an important issue in structural safety evaluation. In this regard, appropriate data analysis and feature extraction techniques are required to interpret the measured data and to identify the state of the structure and, if possible, to detect the damage. In this study, the recursive subspace identification with Bona‐fide LQ renewing algorithm (RSI‐BonaFide‐Oblique) incorporated with moving window technique is utilized to identify modal parameters such as natural frequencies, damping ratios, and mode shapes at each instant of time during the strong earthquake excitation. From which the least square stiffness method (LSSM) combined with the model updating technique, called efficient model correction method (EMCM), is used to estimate the first‐stage system stiffness matrix using the simplified model from the previously identified modal parameters (nominal model). In the second stage, 2 different damage assessment algorithms related to the nominal system stiffness matrix were derived. First, the model updating technique, called EMCM, is applied to correct the nominal model by the newly identified modal parameters during the strong motion. Second, the element damage index can be calculated using element damage index method (EDIM) to quantify the damage extent in each element. Verification of the proposed methods through the shaking table test data of 2 different types of structures and a building earthquake response data is demonstrated to specify its corresponding damage location, the time of occurrence during the excitation, and the percentage of stiffness reduction.     

An experimental study of temperature effect on modal parameters of the Alamosa Canyon Bridge

Damage detection techniques have been proposed to exploit changes in modal parameters and to identify the extent and location of damage in large structures. Most of such techniques, however, generally neglect the environmental effects on modal parameters. Such environmental effects include changes in loads, boundary conditions, temperature, and humidity. In fact, the changes due to environmental effects can often mask more subtle structural changes caused by damage. This paper examines a linear adaptive model to discriminate the changes of modal parameters due to temperature changes from those caused by structural damage or other environmental effects. Data from the Alamosa Canyon Bridge in the state of New Mexico were used to demonstrate the effectiveness of the adaptive filter for this problem. Results indicate that a linear four-input (two time and two spatial dimensions) filter to temperature can reproduce the natural variability of the frequencies with respect to time of day. Using this simple model, we attempt to establish a confidence interval of the frequencies for a new temperature profile in order to discriminate the natural variation due to temperature. Copyright © 1999 John Wiley & Sons, Ltd.     

随机子空间方法在桥塔模态参数识别中的应用

基于环境振动的结构模态参数识别方法正逐渐成为国内外研究的一大热点。环境振动方法就是仅仅利用结构测试的输出信号进行结构的模态参数识别,随机子空间方法就是其中的一种。随机子空间法是近年来发展起来的一种线性系统辩识方法,可以有效地从环境激励的结构响应中获取模态参数。它属于时域的方法,该方法不需要进行FFT变换,它不仅可以识别结构的频率,而且可以识别结构的阻尼和振型。文章首先介绍了随机子空间的理论,然后用该方法对正在施工中的南京长江三桥的南塔进行模态参数识别,通过与其他方法的识别结果进行比较,证明随机子空间方法不失为一种有效的模态参数识别方法。     

基于曲率模态和小波变换的结构损伤位置识别

小波变换具有在时域和频域内表征信号局部特性的能力,能够在不同尺度下对结构响应中的突变信号进行放大和识别.在结构曲率模态基础上,本文提出了一种基于小波变换的结构损伤检测和定位方法.利用双正交小波函数对损伤前后结构的曲率模态进行小波变换,用损伤前后小波变换系数残差建立了结构损伤指标,通过小波变换系数残差的分布统计情况判定损伤的存在并确定其位置.应用简支梁数值模拟结果对该方法进行了验证.     

Evolution of modal characteristics of a mid-rise cold-formed steel building during construction and earthquake testing

Vibration-based structural identification is an essential technique for assessing structural conditions by inferring information from the dynamic characteristics of structures. However, the robustness of such techniques in monitoring the progressive damage of real structures has been validated with only a handful of research efforts, largely due to the paucity of monitoring data recorded from damaged structures. In a recent experimental program, a mid-rise cold-formed steel building was constructed at full scale atop a large shake table and subsequently subjected to a unique multi-hazard scenario including earthquake, post-earthquake fire, and finally post-fire earthquake loading. Complementing the simulated hazard events, low-amplitude vibration tests, including ambient vibrations and white noise base excitation tests, were conducted throughout the construction and the test phases. Using the vibration data collected during the multi-hazard test program, this paper focuses on understanding the modal characteristics of the cold-formed steel building in correlation with the construction and the structural damage progressively induced by the simulated hazard events. The modal parameters of the building (i.e., natural frequencies, damping ratios, and mode shapes) are estimated using two input–output and two output-only time-domain system identification techniques. Agreement between the evolution of modal parameters and the observations of the progression of physical damage demonstrates the effectiveness of the vibration-based system identification techniques for structural condition monitoring and damage assessment.     

Simulation of structural response under high‐frequency ground excitation

The structural response to high‐frequency ground motions is complicated due to the involvement of local‐mode vibration. At present such a characteristic is not well recognized and this can cause confusion over the analytical and experimental modelling of the corresponding response and damage. The fact that most existing regulatory guides for limits on allowable construction vibrations are necessarily simplified for administrative reasons calls upon the derivation of more sophisticated approaches for special cases. This requires accumulation of pertinent experimental evidence. This paper attempts to provide some insights into the local‐mode dynamic response characteristics, with emphasis on appropriate modelling techniques and experimental measurements. A preliminary testing program is reported, in which efforts were made to reproduce high‐frequency response with a reduced scale reinforced concrete model with shaking table facilities. The results demonstrate the dependence of the response amplitudes with the excitation frequency. On a ppv‐basis, the current test results indicate that a substantial increase of the allowable ppv value from those specified by various standards may be considered for structural damage to reinforced concrete building structures. More analytical and experimental data are needed for further evaluation of the local‐mode effects and to quantify their impact on the structural damage process. Copyright © 2001 John Wiley & Sons, Ltd.     

Condition assessment of structures under unknown support excitation

A new method is proposed to assess the condition of structures under unknown support excitation by simultaneously detecting local damage and identifying the support excitation from several structural dynamic responses. The support excitation acting on a structure is modeled by orthogonal polynomial approximations, and the sensitivities of structural dynamic response with respect to its physical parameters and orthogonal coeffi cients are derived. The identifi cation equation is based on Taylor’s fi rst orde...