A conceptual model for the longitudinal distribution of wood in mountain streams

Wood load, channel parameters and valley parameters were surveyed in 50 contiguous stream segments each 25 m in length along 12 streams in the Colorado Front Range. Length and diameter of each piece of wood were measured, and the orientation of each piece was tallied as a ramp, buried, bridge or unattached. These data were then used to evaluate longitudinal patterns of wood distribution in forested headwater streams of the Colorado Front Range, and potential channel‐, valley‐ and watershed‐scale controls on these patterns. We hypothesized that (i) wood load decreases downstream, (ii) wood is non‐randomly distributed at channel lengths of tens to hundreds of meters as a result of the presence of wood jams and (iii) the proportion of wood clustered into jams increases with drainage area as a result of downstream increases in relative capacity of a stream to transport wood introduced from the adjacent riparian zone and valley bottom. Results indicate a progressive downstream decrease in wood load within channels, and correlations between wood load and drainage area, elevation, channel width, bed gradient and total stream power. Results support the first and second hypotheses, but are inconclusive with respect to the third hypothesis. Wood is non‐randomly distributed at lengths of tens to hundreds of meters, but the proportion of pieces in jams reaches a maximum at intermediate downstream distances within the study area. We use these results to propose a conceptual model illustrating downstream trends in wood within streams of the Colorado Front Range. Copyright © 2009 John Wiley & Sons, Ltd.     

Decadal-scale changes in suspended wood after riparian recruitment in managed stands in headwater streams of coastal British Columbia,Canada

Large wood (LW) affects several ecological and hydrogeomorphic processes in streams. The main source of LW is riparian trees falling inside channels. However, in confined valley floors, falling trees are more likely to be suspended above the channel. Eventually, these suspended trees will decompose and break to finally fall into the channel to better provide functions for streams. We evaluated changes in wood decay, length, diameter, and suspended status (suspended or non-suspended) 17 years post-harvest and nine years after the first sampling occurred in 2006 in 12 headwater streams of coastal British Columbia, Canada. We also evaluated whether changes differed among riparian management treatments (no-harvest buffers of 10 and 30 m in width, thinning, and unharvested reference sites), and identified the factors affecting wood changes and suspended status. Wood pieces advanced in decay, became shorter, and 34% of them (n = 108) changed status from suspended to non-suspended. Non-suspended wood pieces were more decayed and shorter than suspended wood. Suspended wood was longer, thicker, less decayed, and represented 46.5% (n = 147) of the wood sampled in 2006. Our findings revealed limited influences of riparian management on many aspects of wood changes considered in this study. Changes in wood characteristics were more likely for pieces that were smaller in diameter, longer, and suspended closer to the water. The transition from suspended to non-suspended LW can be a long-term process that can increase wood residence time and reduce LW in-stream functions particularly in confined stream valleys. The suspended stage is also an important mechanism underlying time lags in stream ecosystem responses to riparian tree fall. © 2020 John Wiley & Sons, Ltd.     

Effects of forest stand age on the characteristics of logjams in mountainous forest streams

We measured longitudinal spacing and wood volume of channel‐spanning logjams along 30 1‐km reaches of forest streams in the Colorado Front Range, USA. Study streams flow through old‐growth (> 200 year stand age) or younger subalpine conifer forest. Evaluating correlations between the volume and longitudinal spacing of logjams in relation to channel and forest characteristics, we find that old‐growth forest streams have greater in‐stream wood loads and more jams per kilometer than streams in younger forest. Old‐growth forests have a larger basal area close to the stream and correlate with larger piece diameters of in‐stream wood. Jam volume correlates inversely with the downstream spacing for ramp and bridge pieces that can act as key pieces in jams. Most importantly, old‐growth streams have shorter downstream spacing for ramp and bridge pieces (< 20 m). Our results suggest that management of in‐stream wood and associated stream characteristics can be focused most effectively at the reach scale, with an emphasis on preserving old‐growth riparian stands along lower gradient stream reaches or mimicking the effects of old growth by manipulating the spacing of ramp and bridge pieces. Our finding that average downstream spacing between jams declines as wood load increases suggests that the most effective way to create and retain jams is to ensure abundant sources of wood recruitment, with a particular emphasis on larger pieces that are less mobile because they have at least one anchor point outside the active channel. Copyright © 2014 John Wiley & Sons, Ltd.     

Geomorphic and stream flow influences on large wood dynamics and displacement lengths in high gradient mountain streams (Chile)

Understanding large wood (LW; ≥1 m long and ≥10 cm in diameter) dynamics in rivers is critical for many disciplines including those assessing flood hazard and risk. However, our understanding of wood entrainment and deposition is still limited, mainly because of the lack of long‐term monitoring of wood‐related processes. The dataset presented here was obtained from more than 8 years of monitoring of 1,264 tagged wood pieces placed in 4 low‐order streams of the Chilean mountain ranges and was used to further our understanding of key factors controlling LW dynamics. We show that LW displacement lengths were longer during periods when peak‐flow water depths (H_max) exceeded the bankfull stage (H_Bk) than in periods with H_max ≤ H_Bk and that these differences were significantly higher for smaller wood pieces. LW length and length relative to channel dimensions were the main factors governing LW entrainment; LW displacement lengths were inversely related to the ratio of piece length to H_15% (i.e., the level above which the flow remains for 15% of the time) and to the ratio of H_15% to bankfull width. Unrooted logs and LW pieces located at the bankfull stage travelled significantly longer distances than logs with attached rootwads and those located in other positions within the bankfull channel. A few large logjams were broken during the period of observation, and in all occasions, LW from these broken logjams did not travel over longer distances than other pieces of LW moved in the same periods and in the same stream segments. Most importantly, our work reveals that LW dynamics tend to be concentrated within a few reaches in each stream and that reaches exhibiting high wood dynamics (extensive entrainment, deposition, or repositioning of LW) are significantly wider and less steep than less dynamic reaches.     

Scale‐dependent controls upon the fluvial export of large wood from river catchments

The annual fluvial export of large wood (LW) was monitored by local reservoir management offices in Japan. LW export per unit watershed area was relatively high in small watersheds, peaked in intermediate watersheds, and decreased in large watersheds. To explain these variations, we surveyed the amount of LW with respect to channel morphology in 78 segments (26 segments in each size class) in the Nukabira River, northern Japan. We examined the differences in LW dynamics, including its recruitment, transport, storage, and fragmentation and decay along the spectrum of watershed sizes. We found that a large proportion of LW produced by forest dynamics and hillslope processes was retained because of the narrower valley floors and lower stream power in small watersheds. The retained LW pieces may eventually be exported during debris flows. In intermediate watersheds, the volume of LW derived from hillslopes decreased substantially with reductions in the proportion of channel length bordered by hillslope margins, which potentially deliver large quantities of LW. Because these channels have lower wood piece length to channel width ratios and higher stream power, LW pieces can be transported downstream. During transport, LW pieces are further fragmented and can be more easily transported. Therefore, the fluvial export of LW is maximized in intermediate watersheds. Rivers in large watersheds, where the recruitment of LW is limited by the decreasing hillslope margins, cannot transport LW pieces because of their low stream power, and thus LW pieces accumulate at various storage sites. Although these stored LW pieces can be refloated and transported by subsequent flood events, they may also become trapped by obstacles such as logjams and standing trees on floodplains and in secondary channels, remaining there for decades and eventually decaying into fine organic particles. Thus, the fluvial export of LW pieces is low in large watersheds. Copyright © 2009 John Wiley & Sons, Ltd.     

Wood distribution in neotropical forested headwater streams of La Selva,Costa Rica

Surveys of wood along 30 forested headwater stream reaches in La Selva Biological Station in north‐eastern Costa Rica represent the first systematic data reported on wood loads in neotropical streams. For streams with drainage areas of 0·1–8·5 km² and gradients of 0·2–8%, wood load ranged from 3 to 34·7 m³ wood/100 m channel and 41–612 m³ wood/ha channel. These values are within the range reported for temperate streams. The variables wood diameter/flow depth, stream power, the presence of backflooding, and channel width/depth are consistently selected as significant predictors by statistical models for wood load. These variables explain half to two‐thirds of the variability in wood load. These results, along with the spatial distribution of wood with respect to the thalweg, suggest that transport processes exert a greater influence on wood loads than recruitment processes. Wood appears to be more geomorphically effective in altering bed elevations in gravel‐bed reaches than in reaches with coarser or finer substrate. Copyright © 2009 John Wiley & Sons, Ltd.     

Large wood in central Appalachian headwater streams: controls on and potential changes to wood loads from infestation of hemlock woolly adelgid

Large wood (LW) is an important component of forested headwater streams. The character of LW loads reflects a balance between adjacent valley processes that deliver LW to the channel (herein recruitment processes) and stream channel processes that either retain or transport LW through the reach (herein retention processes). In the central Appalachian Mountains, USA, LW characteristics in headwater streams located in eastern hemlocks (Tsuga candensis) forests are expected to change because of infestation of hemlock woolly adelgid (Adelges tsugae, HWA), an exotic, invasive insect. We examined LW characteristics in 24 headwater streams ranging from un‐infested to severe infestation, as determined by hemlock canopy health. The objectives of this work were to: (i) quantify wood loads; (ii) assess the relative importance of valley recruitment and in‐stream retention mechanisms in controlling reach‐scale wood loads; and (iii) assess if there was a detectable influence of HWA on LW loads. We hypothesized that LW loads would be similar to other forested streams in eastern USA and dominated by recruitment processes. In addition, higher LW loads would correspond with advanced HWA infestation. Mean wood frequency was 38 pieces/100 m ± 17 (standard deviation); mean wood volume was 3.69 m³/100 m ± 2.76. In general, LW load characteristics were influenced by both recruitment and retention parameters; jam (accumulations ≥ 3 pieces) characteristics were dominated by retention parameters. Results suggest that adjacent stand basal area influences LW loads and once LW is recruited to the channel, streams lack sufficient hydraulic driving forces, despite having lower resistance structures, to transport LW out of the reach. Sites in moderate decline had higher proportions of short (1–2 m and 1–4 m) and very long (>10 m) LW with higher frequency of jams that were low in volume. We present a hypothesized conceptual model of expected changes to LW loads associated with HWA infestation and hemlock mortality. Copyright © 2015 John Wiley & Sons, Ltd.     

Dynamics of Wood Transport in Streams: A Flume Experiment

The influence of woody debris on channel morphology and aquatic habitat has been recognized for many years. Unlike sediment, however, little is known about how wood moves through river systems. We examined some dynamics of wood transport in streams through a series of flume experiments and observed three distinct wood transport regimes: uncongested, congested and semi-congested. During uncongested transport, logs move without piece-to-piece interactions and generally occupy less than 10 per cent of the channel area. In congested transport, the logs move together as a single mass and occupy more than 33 per cent of the channel area. Semi-congested transport is intermediate between these two transport regimes. The type of transport regime was most sensitive to changes in a dimensionless input rate, defined as the ratio of log volume delivered to the channel per second (Q_log) to discharge (Q_W); this ratio varied between 0·015 for uncongested transport and 0·20 for congested transport. Depositional fabrics within stable log jams varied by transport type, with deposits derived from uncongested and semi-congested transport regimes having a higher proportion of pieces orientated normal to flow than those from congested transport. Because wood input rates are higher and channel dimensions decrease relative to piece size in low-order channels, we expect congested transport will be more common in low-order streams while uncongested transport will dominate higher-order streams. Single flotation models can be used to model the stability of individual pieces, especially in higher-order channels, but are insufficient for modelling the more complex intractions that occur in lower-order streams. © 1997 John Wiley & Sons, Ltd.     

Fine particle transport dynamics in response to wood additions in a small agricultural stream

Wood additions to streams can slow water velocities and provide depositional areas for bacteria and fine particles (e.g., particulate organic carbon and nutrients sorbed to fine sediment), therefore increasing solute and particle residence times. Thus, wood additions are thought to create biogeochemical hotspots in streams. Added wood is expected to enhance in-stream heterogeneity, result in more complex flow paths, increase natural retention of fine particles and alter the geomorphic characteristics of the stream reach. Our aim was to directly measure the impact of wood additions on fine particle transport and retention processes. We conducted conservative solute and fluorescent fine particle tracer injection studies in a small agricultural stream in the Whatawhata catchment, North Island of New Zealand in two reaches—a control reach and a reach restored 1-year earlier by means of wood additions. Fine particles were quantified in surface water to assess reach-scale (channel thalweg) and habitat-scale (near wood) transport and retention. Following the injection, habitat-scale measurements were taken in biofilms on cobbles and by stirring streambed sediment to measure fine particles available for resuspension. Tracer injection results showed that fine particle retention was greater in the restored compared to the control reach, with increased habitat-scale particle counts and reach-scale particle retention. Particle deposition was positively correlated with cobble biofilm biomass. We also found that the addition of wood enhanced hydraulic complexity and increased the retention of solute and fine particles near the wood, especially near a channel spanning log. Furthermore, particles were more easily remobilized from the control reach. The mean particle size remobilized after stirring the sediments was ~5 μm, a similar size to both fine particulate organic matter and many microorganisms. These results demonstrate that particles in this size range are dynamic and more likely to remobilize and transport further downstream during bed mobilization events.     

Implementation and validation of video monitoring for wood budgeting in a wandering piedmont river,the Ain River (France)

The transport of wood in rivers during floods is an important process that underlies differences in habitat and morphology between water courses and regions. Quantitative data are needed to properly address management objectives and balance wood budgets. In this study we use a streamside video camera to detect wood passage and measure quasi‐instantaneous rates of wood transport in the Ain River, France. The objectives are to verify the procedure, describe the relation between wood transport and discharge, and construct and validate a wood budget for the reach upstream of the camera. Verification of the procedure includes tests of detection frequency, wood velocity, and piece size. A log base two transformation is proposed to classify wood by piece length. It was found that a wood transport threshold occurs at approximately two thirds of the bankfull discharge. Wood transport follows a positive linear relation with discharge up to the bankfull discharge but is both more variable and less sensitive to discharge when the floodplain is inundated. Transport rates are approximately four times higher on the rising limb of the hydrograph than on the falling limb. Wood transport estimates from a three‐stage rating curve are two to 10 times higher than those from a wood budget using local and aerial surveys of upstream dynamics. Future work should address uncertainties related to wood diameter measurements, sampling length and frequency, and antecedent floods. Copyright © 2012 John Wiley & Sons, Ltd.     

Long-term large wood load fluctuations in two low-order streams in Southern Chile

The eco-hydrogeomorphic significance of large wood (LW) and its potential for increasing downstream hazards during extreme floods have been widely recognized. We used LW data collected for a 10-year period from the two low-order streams of Pichún (Pi) and Vuelta de Zorra (VZ) in Southern Chile to (a) determine if the abundance and dimensions of individual LW pieces change with time, (b) quantify wood load fluctuations during the 10-year period, and (c) assess the role of LW recruitment from the riparian forests to explain wood load fluctuations during the study period. Nine years after the first survey, the number of LW pieces in Pi and VZ diminished by 60 and 40%, respectively. Despite the reduction in these numbers, in Pi, the LW dimensions did not change significantly during the study. In VZ, the dimensions exhibited statistically significant differences, despite being within the same class. In both catchments, the LW load fluctuated during a 10-year period, but the drivers of change differed. Although tree toppling was the recruitment mechanism responsible for LW in both stream cases, the high wood load measured in Pi at the beginning of the study suggested massive tree recruitments before the first survey, followed by wood exports which were higher than inputs in the subsequent 10-year period. In VZ, LW load decreased during the first 9 years (mean annual rate of ~9.2 m³ year⁻¹) and then increased by ~12.1 m³ year⁻¹ in year 10. At VZ, the inputs consisted of single trees that were recruited from the riparian area and by upstream flotation, while exports occurred by downstream fluvial transport. Wood inputs and exports occurred asynchronously and led to LW load fluctuations at decadal and annual intervals. Land management and tree species thus exert a major influence on wood inventory and budget in streams. © 2020 John Wiley & Sons, Ltd.     

Hyporheic and total transient storage in small,sand‐bed streams

Key processes in stream ecosystems are linked to hydraulic retention, which is the departure of stream flow from ideal ‘plug flow’, and reflects fluid movement through surface and hyporheic storage zones. Most existing information about hyporheic exchange is based on flume studies or field measurements in relatively steep streams with beds coarser than sand. Stream tracer studies may be used to quantify overall hydraulic retention, but disaggregation of surface and hyporheic retention remains difficult. A stream tracer approach was used to compute the rates at which stream water is exchanged with water in storage zones (total storage) in short reaches of two small, sand‐bed streams under free and obstructed flow conditions. Tracer curves were fit to the one‐dimensional transport with inflow storage model OTIS‐P. Networks of piezometers were used to measure specific discharge between the stream and the groundwater. In the sand‐bed streams studied, parameters describing total retention were in the upper 50% of data compiled from the literature, most of which represented streams with beds coarser than sand. However, hyporheic storage was an insignificant component of total hydraulic retention, representing only 0·01–0·49% of total exchange, and this fraction did not increase after installation of flow obstructions. Total retention did not vary systematically with bed material size, but increased 50–100% following flow obstruction. Removal of roughness elements, such as large wood and debris dams, is detrimental to processes dependent upon transient storage in small, sand‐bed streams. Copyright © 2007 John Wiley & Sons, Ltd.     

Wood storage in a wide mountain river: case study of the Czarny Dunajec,Polish Carpathians

Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha^?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

Wood dynamics in upland streams under different disturbance regimes

This paper presents reach scale large wood (LW) budgets of 12 upland streams in the Okanagan Basin of British Columbia. The study included 100 m long reaches at three wildfire sites and three undisturbed sites in the Interior Douglas‐fir (IDF) biogeoclimatic zone, and three recent Mountain Pine Beetle (MPB) infestation sites and three undisturbed sites in the Montane Spruce (MS) zone. Detailed information on wood recruitment, output and storage were obtained from repeated annual surveys. Recruitment from the riparian zone was found to dominate wood inputs, with fluvial import of secondary importance. In undisturbed streams, wood exhumation was found to be of tertiary importance, but was not observed in disturbed streams. Relative wood length was found to be a strong predictor of wood stability, with wood length to channel width and wood diameter to channel depth ratios of 1:1 forming an approximate maximum threshold of wood mobility. Volumetric decomposition was, on average, a third of the value of fluvial export, and the average residence time of wood in the channels was 20 years. In undisturbed reaches, wood storage indicated a slow depletion of wood from the channels. In the disturbed reaches, wildfire was found to significantly increase annual wood recruitment by more than an order of magnitude over undisturbed or control streams. MPB had not significantly increased LW recruitment, but is expected to increase over the coming decades. Storage rates at the disturbed streams indicated a net accumulation of wood over the study period. Copyright © 2012 John Wiley & Sons, Ltd.     

The resilience of logjams to floods

Logjams that span the bankfull channel strongly influence hydraulics and downstream fluxes of diverse materials. Several studies quantify the longitudinal distribution of channel-spanning logjams, but fewer studies examine changes in longitudinal distribution in response to disturbances such as floods. We use 10 years of annual surveys of a population of channel-spanning logjams along mountain streams in the Southern Rocky Mountains. Surveys from 2010 to 2019 bracket substantial interannual variability in the snowmelt peak flow as well as a rainfall flood in 2013. We characterised the number of logjams per unit length of valley (logjam distribution density) within and between reaches designated based on longitudinally consistent channel and valley geometry. Our primary objectives are to evaluate the influences on logjam distribution density of (i) spatial variations in valley and channel geometry and (ii) temporal variations in peak annual flow. We hypothesized that logjam distribution densities are resilient to disturbance at both spatial scales. At the creek scale, logjam distribution density correlates significantly with increasing ratio of floodplain width to channel width and wood piece length to channel width. Wide, low gradient reaches with greater distribution density exhibit greater interannual variation in distribution density. These reaches lost jams during the 2013 flood but returned to pre-flood distribution density values by the end of the study. The pattern of greater logjam distribution density in unconfined reaches relative to confined and partially confined reaches is also consistent over the period of the study. We interpret these results as indicating the resilience of logjam distributions to disturbance. The persistence of greater numbers of logjams in wide, low gradient reaches suggests that river restoration employing engineered logjams and wood reintroduction can focus most effectively on these reaches.     

Historical land use as a driver of alternative states for stream form and function in forested mountain watersheds of the Southern Rocky Mountains

We demonstrate how land use can drive mountain streams in the Southern Rockies across a threshold to induce an alternative state of significantly reduced physical complexity of form and reduced ecological function. We evaluate field data from 28 stream reaches in relatively laterally unconfined valleys and unmanaged forest that is either old‐growth forest or naturally disturbed younger forest, and 19 stream reaches in managed forest with past land use. We evaluate potential differences in stream form, as reflected in channel planform, cross‐sectional geometry, and in‐stream wood loads, and stream function, as reflected in pool volume and storage of organic carbon. Field data indicate a threshold of differences in stream form and function between unmanaged and managed stream reaches, regardless of forest stand age, supporting our hypothesis that the legacy effects of past land use result in an alternative state of streams. Because physical complexity that increases stream retentiveness and habitat can maintain aquatic‐riparian ecosystem functions, the alternative physical state of streams in managed watersheds creates a physical template for an alternative ecological state with reduced pool volume, organic carbon storage, and ecosystem productivity. We recommend maintaining riparian forests that can supply large wood to streams as a stream restoration technique in historically forested stream segments. Copyright © 2017 John Wiley & Sons, Ltd.     

A flume experiment on wood storage and remobilization in braided river systems

This work investigates wood dynamics in braided streams through physical modelling in a mobile bed laboratory flume, with the specific objective to characterize wood storage and turnover as a function of wood input rate and of wood element type. Three parallel channels (1.7 m wide, 10 m long) filled with uniform sand were used to reproduce braided networks with constant water discharge and sediment feeding. Wood dowels with and without simplified root wads were regularly added at the upstream end of each flume at different input rates, with a 1:2:3 ratio between the three flumes. Temporal evolution of wood deposition patterns and remobilization rates were monitored by a series of vertical images that permitted the recognition of individual logs. Results show that wood tends to disperse in generally small accumulations (< 5 logs), with higher spatial density on top of sediment bars, and is frequently remobilized due to the intense morphological changes. The amount of wood stored in the channel depends on log input rate through a non‐linear relationship, and input rates exceeding approximately 100 logs/hour determine a sharp change in wood dynamics, with higher storage volume and augmented formation of large jams (> 10 elements) that are less prone to remobilization. Presence of root wads seems to play a minor role in wood deposition, but it reduces the average travel distance of logs. Turnover rates of logs were similar in the three flumes, independently of wood input rate and largely resembling the turnover rate of exposed bars. For the simulated conditions, significant effects of wood on bed morphology were not observed, suggesting that interactions with fine sediments and living vegetation are crucial to form large, stable wood jams able to bring about relevant morphological changes. Copyright © 2014 John Wiley & Sons, Ltd.     

The early impact of large wood introduction on the morphology and sediment characteristics of a lowland river

Habitat degradation in river ecosystems has considerably increased over the past decades, resulting in detrimental effects on aquatic and riparian communities. During the last two decades, the value of large wood as a resource for river restoration and recovery has been increasingly documented. However, post-project appraisal of the associations between restored large wood, morphological complexity and river ecology as a result of river restoration is extremely rare and thus scientific knowledge is essential. To investigate restored wood-induced morphological response and sediment complexity in an overwidened reach along a low gradient lowland river (River Bure, UK), two sub-reaches containing 12 jams initiated by wood emplacement in 2008 and 2010 and a sub-reach free of wood were studied. Wood surveys recording the dimensions and number of wood pieces in jams, geomorphological mapping of the reach illustrating the spatial distribution of features in and around the jams and in a section free of wood, and sediment sampling (analysed for particle size, organic content and plant propagule abundance) of five recurring patch types surrounding each jam (two wood-related patches and three representing the broader river environment) were performed. Wood jams partially spanned the river channel and contained large pieces of wood that created more open structures than naturally-formed wood jams. Where no wood was introduced, the channel remains wide and the gravel bed is buried by sand and finer sediment. In the restored reaches, fine sediment has accumulated in and around the wood jams and has been stabilised by vegetation colonisation, enhancing flow velocities in the narrowed channel sufficiently to mobilise fine sediment and expose the gravel bed. Sediment analysis reveals sediment fining with time since wood emplacement, largely achieved within the two wood-related patch types. Fine sediment retained around the wood shows a relatively higher plant propagule content than other patch types, suitable for sustaining plant succession as the vegetated side bars aggrade. Although channel narrowing and morphological adjustment has occurred surprisingly rapidly in this low energy, over-widened reach following wood introduction (2–4 years), sustaining the recovery in the longer term to suitably support flora and fauna communities depends on the continued delivery of wood by ensuring a natural supply of sufficiently large wood pieces from riparian trees both upstream and within the reach.     

Processes and rates of sediment and wood accumulation in headwater streams of the Oregon Coast Range,USA

Channels that have been scoured to bedrock by debris flows provide unique opportunities to calculate the rate of sediment and wood accumulation in low‐order streams, to understand the temporal succession of channel morphology following disturbance, and to make inferences about processes associated with input and transport of sediment. Dendrochronology was used to estimate the time since the previous debris flow and the time since the last stand‐replacement fire in unlogged basins in the central Coast Range of Oregon. Debris flow activity increased 42 per cent above the background rate in the decades immediately following the last wildfire. Changes in wood and sediment storage were quantified for 13 streams that ranged from 4 to 144 years since the previous debris flow. The volume of wood and sediment in the channel, and the length of channel with exposed bedrock, were strongly correlated with the time since the previous debris flow. Wood increased the storage capacity of the channel and trapped the majority of the sediment in these steep headwater streams. In the absence of wood, channels that have been scoured to bedrock by a debris flow may lack the capacity to store sediment and could persist in a bedrock state for an extended period of time. With an adequate supply of wood, low‐order channels have the potential of storing large volumes of sediment in the interval between debris flows and can function as one of the dominant storage reservoirs for sediment in mountainous terrain. Copyright © 2003 John Wiley & Sons, Ltd.     

Porosity problems: Comparing and reviewing methods for estimating porosity and volume of wood jams in the field

Porosity, or void space, of large wood jams in stream systems has implications for estimating wood volumes and carbon storage, the impacts of jams on geomorphic and ecological processes, and instream habitat. Estimating porosity and jam dimensions (i.e. jam volume) in the field is a common method of measuring wood volume in jams. However, very few studies explicitly address the porosity values in jams, how porosity is calculated and assessed for accuracy, and the effect such estimates have on carbon and wood budgets in river corridors. We compare methods to estimate jam porosity and wood volume using field data from four different depositional environments in North America (jam types include small in-channel jams, large channel-margin jams, a large island apex jam, and a large coastal jam), and compare the results with previous studies. We find that visual estimates remain the most time-efficient method for porosity estimation in the field, although they appear to underpredict back-calculated porosity values; the accuracy of jam porosity, and thus wood volume, estimates are difficult to definitively measure. We also find that porosity appears to be scale invariant, dictated mostly by jam type, (which is influenced by depositional processes), rather than the size of the jam. Wood piece sorting and structural organization are likely the most influential properties on jam porosity, and these factors vary according to depositional environment. We provide a framework and conceptual model that uses these factors to demonstrate how modeled jam porosity values differ and give recommendations as a catalyst for future work on porosity of wood jams. We conclude that jam type and size and/or the study goals may dictate which porosity method is the most appropriate, and we call for greater transparency and reporting of porosity methods in future studies. © 2020 John Wiley & Sons, Ltd.