Rupture progression along discontinuous oblique fault sets: implications for the Karadere rupture segment of the 1999 Izmit earthquake, and future rupture in the Sea of Marmara

Large earthquakes in strike-slip regimes commonly rupture fault segments that are oblique to each other in both strike and dip. This was the case during the 1999 Izmit earthquake, which mainly ruptured E–W-striking right-lateral faults but also ruptured the N60°E-striking Karadere fault at the eastern end of the main rupture. It will also likely be so for any future large fault rupture in the adjacent Sea of Marmara. Our aim here is to characterize the effects of regional stress direction, stress triggering due to rupture, and mechanical slip interaction on the composite rupture process. We examine the failure tendency and slip mechanism on secondary faults that are oblique in strike and dip to a vertical strike-slip fault or “master” fault. For a regional stress field well-oriented for slip on a vertical right-lateral strike-slip fault, we determine that oblique normal faulting is most favored on dipping faults with two different strikes, both of which are oriented clockwise from the strike-slip fault. The orientation closer in strike to the master fault is predicted to slip with right-lateral oblique normal slip, the other one with left-lateral oblique normal slip. The most favored secondary fault orientations depend on the effective coefficient of friction on the faults and the ratio of the vertical stress to the maximum horizontal stress. If the regional stress instead causes left-lateral slip on the vertical master fault, the most favored secondary faults would be oriented counterclockwise from the master fault. For secondary faults striking ±30° oblique to the master fault, right-lateral slip on the master fault brings both these secondary fault orientations closer to the Coulomb condition for shear failure with oblique right-lateral slip. For a secondary fault striking 30° counterclockwise, the predicted stress change and the component of reverse slip both increase for shallower-angle dips of the secondary fault. For a secondary fault striking 30° clockwise, the predicted stress change decreases but the predicted component of normal slip increases for shallower-angle dips of the secondary fault. When both the vertical master fault and the dipping secondary fault are allowed to slip, mechanical interaction produces sharp gradients or discontinuities in slip across their intersection lines. This can effectively constrain rupture to limited portions of larger faults, depending on the locations of fault intersections. Across the fault intersection line, predicted rakes can vary by >40° and the sense of lateral slip can reverse. Application of these results provides a potential explanation for why only a limited portion of the Karadere fault ruptured during the Izmit earthquake. Our results also suggest that the geometries of fault intersection within the Sea of Marmara favor composite rupture of multiple oblique fault segments.     

State of stress in the northern Tabas block, east-central Iran, as inferred from focal mechanisms of the 1978 Tabas earthquake sequence

In this paper, the state of stress in the northern Tabas block in east-central Iran is analyzed based on the systematic inversion of aftershock focal mechanisms from the 1978.09.16 Tabas earthquake, to characterise the stress regime that controls most earthquakes in this area. Here, stress inversions of double-couple focal mechanisms of earthquakes recorded during the 30 days following the main shock have been carried out. The calculated average stress regime indicates dominant major 226° to 237° trending compression for the Tabas region. The dominating regime in east-central Iran is thrusting with a minimum stress axis, σ ₃, close to vertical. The reconstruction of the main seismotectonic stress in east-central Iran with a NE-SW compression is consistent with independent information of the active plate convergence related to Arabia-Eurasia convergence. Most earthquakes in the mentioned area occur near or around concealed Quaternary thrust faults with their activity being controlled by the NE-SW compression. Where ?, the ratio of principal stress differences, is 0.5, a small difference between σ ₂; σ ₃ and σ ₁ and small amounts of deviatoric stress is indicated. Therefore, for small deviatoric horizontal σ ₁ it is not possible to increase and reactivate small sections of basement thrust faults and create secondary basement aftershocks. Reconstructed stress regimes in this study for sedimentary cover (237) and basement (226) of Tabas are similar. Therefore, it seems that the basement and cover were coupled together, possibly along the 2–4 km of upper Precambrian low-grade metamorphic rocks. Then these segments of the fold-and-thrust belt were involved in similar seismic activity under a similar stress regime.     

The February 11, 2004 Dead Sea earthquake ML = 5.2 in Jordan and its tectonic implication

A moderate-sized (M_w  5.3) earthquake occurred in the Dead Sea basin on February 11, 2004. A rigorous seismological analysis of the main shock and numerous aftershocks suggests that seismogenic structure was a secondary, antithetic fault within the Dead Sea fault system. The main shock is well located using all available regional seismic stations, and 43 aftershocks were precisely located relative to the main shock using a double difference algorithm. The first motion, focal mechanism for this earthquake demonstrates NNW–SSE and ENE–WSW striking nodal planes, and the aftershocks distribution is consistent with the latter — indicating a right-lateral sense of displacement. This orientation and sense of shear are consistent with similarly oriented geological faults around the Dead Sea basin — these structures are likely antithetic faults within the transform system. Although moderate in size, earthquakes that occur very close to the large Dead Sea fault system warrant consideration in the earthquake hazard assessment of the region: For example, owing to the proximity to the main fault, moderate earthquakes such as this may produce static changes in Coulomb stress along the main fault.     

Interplay between stress permutations and overpressure to cause strike‐slip faulting during tectonic inversion

Field data from an orogenic foreland and an orogenic belt (the Mesozoic rocks of southern England and the Umbria‐Marche Apennines of Italy respectively) indicate the following. Firstly, stress evolution during the tectonic cycle, between maximum compressive stress (σ₁) being vertical during extension and least compressive stress (σ₃) being vertical during contraction, can involve phases when the intermediate compressive stress (σ₂) is vertical, promoting strike‐slip deformation. Secondly, variations in the relative magnitudes of the stress axes are caused by variations in overburden and tectonic forces. Thirdly, overpressure can develop because of compaction during burial, and, as overburden is reduced during uplift and erosion, the vertical stress (σ_V) reduces but fluid pressure (P_f) remains approximately constant. Brittle deformation, including transient strike‐slip faults, reverse‐reactivated normal faults and normal‐reactivated thrusts, is preferentially developed in overpressured areas because high P_f promotes faulting.     

Stress triggering of normal aftershocks due to strike slip earthquakes in compressive regime

A few cases of occurrence of normal aftershocks after strike slip earthquakes in compressive regime have been reported in the literature. Occurrence of such aftershocks is intriguing as they occurred despite the apparent stabilizing influence of compressive plate tectonic stresses on the normal faults. To investigate the occurrence processes of such earthquakes, we calculate change in static stress on optimally oriented normal and reverse faults in the dilational and compressional step over zones, respectively, due to slip on a vertical strike slip fault under compressive regime. We find that change in static stress is much more pronounced on normal faults as compared to that on reverse faults, for all values of fault friction. Change in static stress on reverse fault is marginally positive only when the fault friction is low, whereas for normal faults it is positive for all values of fault friction, and is maximum for high fault friction. We suggest that strike slip faulting in compressive regime creates a localized tensile environment in the dilational step over zone, which causes normal faulting in that region. The aftershocks on such normal faults are considered to have occurred as an almost instantaneous response of stress transfer due to strike slip motion.     

Stress triggering of normal aftershocks due to strike slip earthquakes in compressive regime

A few cases of occurrence of normal aftershocks after strike slip earthquakes in compressive regime have been reported in the literature. Occurrence of such aftershocks is intriguing as they occurred despite the apparent stabilizing influence of compressive plate tectonic stresses on the normal faults. To investigate the occurrence processes of such earthquakes, we calculate change in static stress on optimally oriented normal and reverse faults in the dilational and compressional step over zones, respectively, due to slip on a vertical strike slip fault under compressive regime. We find that change in static stress is much more pronounced on normal faults as compared to that on reverse faults, for all values of fault friction. Change in static stress on reverse fault is marginally positive only when the fault friction is low, whereas for normal faults it is positive for all values of fault friction, and is maximum for high fault friction. We suggest that strike slip faulting in compressive regime creates a localized tensile environment in the dilational step over zone, which causes normal faulting in that region. The aftershocks on such normal faults are considered to have occurred as an almost instantaneous response of stress transfer due to strike slip motion.     

Seismological constraints on the 2018 Mt. Etna (Italy) flank eruption and implications for the flank dynamics of the volcano

3D earthquake locations, focal mechanisms and stress tensor distribution in a 16‐month interval covering the 2018 Mt. Etna flank eruption, enabled us to investigate the relationship between magma intrusion and structural response of the volcano and shed light on the dynamic processes affecting the instability of Mt. Etna. The magma intrusion likely caused tension in the flanks of the volcano, leading to significant ground deformation and redistribution of stress on the neighbouring faults at the edge of Mt. Etna's unstable sector, encouraging the ESE sliding of the eastern flank of the volcano. Accordingly, FPSs of the post‐eruptive events show strike slip faulting mechanisms, under a stress regime characterized by a maximum compressive σ₁, NE‐SW oriented. In this perspective, any flank eruption could temporarily enhance the sliding process of both the southern and eastern flanks of the volcano.     

Source parameters of March 10 and September 13, 2007, United Arab Emirates earthquakes

On March 10 and September 13, 2007 two earthquakes with moment magnitudes 3.66 and 3.94, respectively, occurred in the eastern part of the United Arab Emirates (UAE). The two events were widely felt in the northern Emirates and Oman and were accompanied by a few aftershocks. Ground motions from these events were well recorded by the broadband stations of Dubai (UAE) and Oman seismological networks and provide an excellent opportunity to study the tectonic process and present day stress field acting in this area. In this study, we report the focal mechanisms of the two main shocks by two methods: first motion polarities and regional waveform moment tensor inversion. Our results indicate nearly pure normal faulting mechanisms with a slight strike slip component. We associated the fault plane trending NNE–SSW with a suggested fault along the extension of the faults bounded Bani Hamid area. The seismicity distribution between two earthquake sequences reveals a noticeable gap that may be a site of a future event. The source parameters (seismic moment, moment magnitude, fault radius, stress drop and displacement across the fault) were also estimated from displacement spectra. The moment magnitudes were very consistent with waveform inversion. The recent deployment of seismic networks in Dubai and Oman reveals tectonic activity in the northern Oman Mountains that was previously unknown. Continued observation and analysis will allow for characterization of seismicity and assessment of seismic hazard in the region.     

A synthesis: Late Cenozoic stress field distribution at northeastern corner of the Eastern Mediterranean,SE Turkey

Fault kinematic analysis and inversion of focal mechanisms of shallow earthquakes reveal significant evolution of the regional stress regime in the northeastern most corner of the Eastern Mediterranean region since the Mio-Pliocene to the present time. This study was carried out in the interaction area between the Arabian/African plates and the Anatolian block. The evolution of stress regimes consists of a change from older transpression to younger transtension. Both strike-slip stress regimes having a NNW- to northwest-trending σ_Hmax (σ₁) and ENE- to northeast-trending σ_Hmin (σ₃) axes induce a sinistral component of displacement on the major intra-continental Karatas–Osmaniye and Misis–Ceyhan faults elongated with the northeast-trending Misis Range between Adana and Osmaniye provinces (sub-area i) and by a NNE-trending plate boundary Amanos fault running along Amanos Range between Antakya and Kahramanmaras provinces (sub-area ii). The inversion results show that the transtensional stress regime is dominantly strike-slip to extension, with an ENE- to northeast-trending σ_Hmin (σ₃) axis for sub-areas (i) and (ii), respectively. The inversions of earthquake focal mechanisms indicate that the transtensional stress regime is still active in the whole study area since probably recent Quaternary time. To cite this article: S. Over et al., C. R. Geoscience 336 (2004).     

Holocene seismic and tectonic activity in the Dead Sea area

The Dead Sea is a large, active graben within the Dead Sea rift, which is bounded by two major strike-slip faults, the Jericho and the Arava faults. We investigated the young tectonic activity along the Jericho fault by excavating trenches, up to 3.5 m deep, across its trace. The trenches penetrate through Late Pleistocene and Holocene sediments. We found that a zone, up to 15 m wide, of disturbed sediments exists along the fault. These disturbed sediments provide evidence for two periods of intensive activity or more likely, for two major earthquakes, that occurred during the last 2000 years. The earthquakes are evident in small faults, vertical throw of a few layers, cracks, unconformities and wide fissures. We further documented evidence for recent sinistral shear along the Jericho fault in deformed sediments and damage to an 8th Century palace on a subsidiary fault. We suggest that the two earthquakes may be correlated with the 31 B.C. earthquake and the 748 A.D. earthquake, reported by the ancients.     

Stress field in the central and northern parts of the Gulf of Suez area,Egypt from earthquake fault plane solutions

Earthquake focal mechanism solutions from 18 events in the central and northern parts of the Gulf of Suez with local magnitudes ranging from 2.8 to 5.2 and occurring between 1983 and 2004 are used to determine the type of motion and stress pattern of the region. Fault plane solutions show mostly normal component; pure normal faulting mechanisms and normal faulting with a strike-slip component. Only some mechanisms show pure strike-slip faulting. The fault planes strike in NW, WNW, NNE and ENE directions, in conformity with the geologically observed striking faults in the northern and central parts of the gulf. The principal stress orientation is also estimated by inverting the selected focal mechanism solutions. The results show that the northern part of the Gulf is subjected to NE–SW to NNE–SSW extension, with a horizontal σ₃ (plunge 3°) and subvertical σ₁ (plunge 80°). This means that the horizontal extensional stresses are still present in the central/northern Gulf of Suez.     

A reappraisal of the 1950 (Mw 6.9) Mondy earthquake, Siberia, and its relationship to the strain pattern at the south-western end of the Baikal rift zone

ABSTRACT The precise nature of the transition between the present-day compressional tectonics in central Mongolia and extensional deformation in the central Baikal rift has still to be determined. For that purpose we have built a comprehensive earthquake focal mechanism data base for the Mongolia – southern Siberia area, from which we map the variations of the stress field. We focus our detailed investigations on the largest seismic event in the transition zone, the 1950 (Mw 6.9) Mondy earthquake, for which several discordant focal mechanisms have been proposed. Using a new approach in source inversion, we resolve the focal mechanism (left-lateral strike slip type on a steep south-dipping fault) and depth (14 ± 3 km) of the Mondy earthquake with a satisfactory accuracy. This seismological information, combined with the geological observations, allows us to decipher the connections between the 1950 mainshock, the local stress tensor and the active faults, which strongly suggest a partitioning of the deformation between two faults, namely the Mondy and Ikhe–Ukghun faults.     

2014年5月云南盈江M_S5.6、M_S6.1地震发震构造分析

2014年5月云南省盈江县先后发生MS5.6、MS6.1地震,为确定它们的发震构造及其所反映的区域活动构造格局,笔者围绕该区开展了地震烈度调查、活动构造遥感解译、地质构造及构造地貌野外调查、震源机制解及余震分布资料分析等工作。调查与分析表明,两次地震的宏观震中均位于盈江县勐弄乡麻栗坡村附近,但发震断层明显不同。前者为NE走向左旋走滑的昔马—盘龙山断裂,后者为近SN向右旋走滑的苏典断裂。历史地震资料显示,盈江地区的地震活动多以5~6级的中-强震为主,并具有明显的群发性和沿SN向断层迁移的特征。在实皆断裂及滇西内弧带的共同作用下,腾冲地块内以大盈江断裂为界,北部主要发育近SN向右旋走滑断裂,南部则以NE向左旋走滑断裂为主,其中近SN向断层晚第四纪活动性更强。     

河套地震带的震源机制类型时空分布特征

基于地质构造背景分析,收集2000年以来发生在河套地震带的M_L≥2.8级地震作为研究对象,综合运用基于P波初动的振幅比方法(APAS)和基于波形拟合的CAP反演方法求出256次地震事件的震源机制解。以断层节面滑动角作为判定指标,分区域给出了河套地震带的震源机制类型空间和时间分布图像,从断层滑动角度呈现河套地震带应力场时空变化过程。结果显示:临河盆地断层节面滑动角主要在水平±20°方向存在优势分布,走滑型特征显著;具体来讲,狼山-色尔腾山山前断裂带、临河断裂、乌拉山山前断裂等主要以纯走滑型地震为主,巴彦乌拉山断裂与磴口-本井断裂之间的区域多分布正走滑型地震。呼包盆地断层节面解虽然也呈现出走滑型为主的特征,但滑动角分布较为离散,优势分布方向不明显;呼包盆地西侧的包头至西山咀凸起一带表现出以走滑为主的小范围震源应力场特征,呼包盆地内部及东侧由于显著的区域垂直差异运动,正断层和逆冲型地震所占比例较大,震源机制类型整体呈现出与构造相依的分布特点。分析认为,2000年以来,河套地震带的应力场存在一定的时空非均匀性变化,研究结果更多表现了河套地震带的震源应力场变化过程,而研究资料时间不够长和震级不够大是引起这种应力场非均匀性暂态特征的主要因素。     

Acceleration response spectra for the earthquakes of the southwestern flank of the Baikal Rift Zone

The acceleration response spectra of earthquakes with M = 4–6.5 in the southwestern part of the Baikal Rift Zone have been studied. The absorption properties of the medium and the attenuation of seismic signals in the study area were determined. Average acceleration response spectra were obtained for regional earthquakes. A comparative analysis of the acceleration response spectra was made for earthquake focal mechanisms with different senses of motion: reverse fault, reverse slip, strike slip, and oblique slip. The effect of the sense of fault motion in the seismic source on acceleration response spectra was determined.     

泛长三角地区主要活动断裂及地震活动基本特征

在系统收集整理前人成果资料基础上,结合基础地质和遥感解译,对泛长三角地区的主要活动断裂及其活动性进行了全面梳理和分析,并根据区域主要断裂的活动性与历史地震活动特征,进一步分析指出了该区需要特别关注的潜在震源区和地壳稳定性相对较差的区域。研究结果表明,该区主要发育38条活动性相对显著的活动断裂带,并以北东和北西走向两组活动断裂为主,前者以右旋走滑活动为主,后者以左旋走滑活动为主;其次为近东西走向,活动性较弱。进一步结合历史地震活动信息分析发现,其中的北东/北北东向断裂是区域上主要的控震构造和发震断层,其次是北西向断裂,这两组不同走向断裂带的交汇部位常常是地震发生部位,其中最显著的控震断裂是北东向的郯庐断裂与北西向的无锡-宿迁断裂。      

Analysis of the Wenchuan Ms8.0 Earthquake’s Co-seismic Stress and Displacement Change by Using the Finite Element Method

The variation of in situ stress before and after earthquakes is an issue studied by geologists. In this paper, on the basis of the fault slip dislocation model of Wenchuan Ms8.0 earthquake, the changes of co-seismic displacement and the distribution functions of stress tensor around the Longmen Shan fault zone are calculated. The results show that the co-seismic maximum surface displacement is 4.9 m in the horizontal direction and 6.5 m in the vertical direction, which is almost consistent with the on-site survey and GPS observations. The co-seismic maximum horizontal stress in the hanging wall and footwall decreased sharply as the distance from the Longmen Shan fault zone increased. However, the vertical stress and minimum horizontal stress increased in the footwall and in some areas of the hanging wall. The study of the co-seismic displacement and stress was mainly focused on the long and narrow region along the Longmen Shan fault zone, which coincides with the distribution of the earthquake aftershocks. Therefore, the co-seismic stress only affects the aftershocks, and does not affect distant faults and seismic activities. The results are almost consistent with in situ stress measurements at the two sites before and after Wenchuan Ms8.0 earthquake. Along the fault plane, the co-seismic shear stress in the dip direction is larger than that in the strike direction, which indicates that the faulting mechanism of the Longmen Shan fault zone is a dominant thrust with minor strike-slipping. The results can be used as a reference value for future studies of earthquake mechanisms.     

Implications of north pacific plate tectonics in central Alaska: Focal mechanisms of earthquakes

The focal mechanisms for 86 selected earthquakes (3.0 m_b 5.5) located in central Alaska have been investigated from P-wave first motions; the data were gathered by local seismic networks. The results show a depth-dependent characteristic to the fault-plane solutions. For earthquakes having focal depths shallower than 60–70 km, the focal mechanisms indicate either strike-slip or normal faults, while for earthquakes with foci at intermediate depths the focal mechanisms correspond to thrust faults. The nature of the seismicity indicates the hinge line of the Pacific lithospheric plate under the study area to be striking N17°E from Cook Inlet towards interior Alaska. The comparison of the focal mechanisms with the seismicity shows that the strike-slip and normal faults are the predominant processes of stress release along the shallow section of the plate. The earthquakes with intermediate foci systematically occur along the inclined section of the plate. If the gently dipping nodal planes for these earthquakes are chosen as the fault planes, the focal mechanisms correspond to underthrust motions at the foci. In these, the slip vectors are oriented either to the west or north with the resultant being in the N30°W direction. The tension axes for the underthrust solutions are also found to be parallel to the local dip of the plate, indicating that the subducted plate in interior Alaska is undergoing gravitational sinking.     

Earthquake evidence for compressive stress in the southeast Australian crust

Earthquakes in SE Australia are usually caused by compressive stresses acting in the crust, and are associated with steeply dipping faults. Sometimes the faulting is predominantly strike‐slip, as for the Bowning earthquakes of 1977 and some of the Dalton/Gunning earthquakes; and sometimes it is high‐angle thrust faulting, as for the 1961 Robertson and 1973 Picton earthquakes. No surface expression of the faults associated with any recent earthquakes in SE Australia has been reported.

The directions of the pressure axes, from all the earthquakes for which focal mechanisms have been determined, do not form a consistent pattern. This suggests that the faulting associated with earthquakes in SE Australia is dominated by the geometry of pre‐existing crustal faults or zones of weakness.

In situ stress measurements have not been made near the epicentral areas of the larger recent earthquakes, because of the absence of competent, near‐surface rocks coupled to the crust. However, in the western part of the Lachlan Fold Belt the in situ stress results indicate that the maximum pressure axis is approximately E‐W. The evidence from the focal mechanisms does not preclude the persistence of this stress regime farther to the east, and a regional compressive stress in the crust with an azimuth of about 120° is consistent with most of the earthquake focal mechanisms and the in situ stress measurements throughout SE Australia.     

Morphotectonics and paleoseismology of the eastern end of the Bolnay fault (Mongolia)

The Bolnay (Hangayn) fault is an active shear system which generated the M = 8.2-8.5 Bolnay earthquake of 23 July 1905, one of world’s largest recorded intracontinental event. The fault follows the Mesozoic suture formed during the closure of the Mongolia-Okhotsk ocean. The Late Cenozoic faulting in the region was induced by propagation of strain from the India-Eurasia collision that had reached Mongolia at about 5 ± 3 Ma. The left-lateral strike slip almost all over the fault length is compensated in its western end by Late Quaternary reverse motion. We estimated coseismic slip associated with the event of 1905 and the previous earthquakes in the eastern fault end and checked whether vertical offset compensates the strike slip in this part as well. The 1905 coseismic slip measured from a displaced dry stream bed and pebble bars in the Hasany-Gol river valley was 6.5-7.5 m. The 13 ± 1 m left-lateral displacement of pebble bars in the same valley represents a cumulative slip of two events. Paleoseismological studies across the strike of surface ruptures reveal at least two generations of rupture in two events that postdated the deposition of sediments with a ¹⁴C age of 4689 ± 94 yr. Hypsometry of the alluvial surface in the zone of deformation shows gradual elevation increase toward the mountains, but without abrupt change across the fault. This means the absence of vertical offset and reactivation of the fault as a left-lateral strike slip. The horizontal slip in the eastern extension of the Bolnay fault is compensated rather by parallel fault-bounded pull-apart basins trending northeastward oblique to the principal fault strike. The age of their sedimentary fill suggests no older than middle Pleistocene normal faulting that compensated the Bolnay strike slip.