Neutral sodium atoms release from the surfaces of the Moon and Mercury induced by meteoroid impacts

In this work, we calculate the neutral Na production rates on the Moon and Mercury, as due to the impacts of meteoroids having an impact probability on the surface that can influence the daily observations of the exosphere: the meteoroids radius range considered for the Moon and Mercury are 10⁻⁸–0.15 and 10⁻⁸–0.10 m, respectively. We also estimate the mass of meteoroids that has impacted the surfaces of the Moon and Mercury in the last 3.8 Gy (after the end of the Late Heavy Bombardment).The results of our model are that (i) the Na production rates are ∼(3–4.9)×10⁴ and ∼(1.8–2.3)×10⁶ atoms cm⁻² s⁻¹, for Moon and Mercury, respectively, and (ii) in the last 3.8 Gy, the mass of meteoroids that has impacted the whole surface of the Moon and Mercury has been 8.86×10¹⁸ and 2.66×10¹⁹ g, respectively.     

Impacts as sources of the exosphere on Mercury

Chemical processes associated with meteoroid bombardment of Mercury are considered. Meteoroid impacts lead to production of metal atoms as well as metal oxides and hydroxides in the planetary exosphere. By using quenching theory, the abundances of the main Na-, K-, Ca-, Fe-, Al-, Mg-, Si-, and Ti-containing species delivered to the exosphere during meteoroid impacts were estimated. Based on a correlation between the solar photo rates and the molecular constants of atmospheric diatomic molecules, photolysis lifetimes of metal oxides and SiO are estimated. Meteoroid impacts lead to the formation of hot metal atoms (0.2-0.4 eV) produced directly during impacts and of very hot metal atoms (1-2 eV) produced by the subsequent photolysis of oxides and hydroxides in the exosphere of Mercury. The concentrations of impact-produced atoms of the main elements in the exosphere are estimated relative to the observed concentrations of Ca, assumed to be produced mostly by ion sputtering. Condensation of dust grains can significantly reduce the concentrations of impact-produced atoms in the exosphere. Na, K, and Fe atoms are delivered to the exosphere directly by impacts while Ca, Al, Mg, Si, and Ti atoms are produced by the photolysis of their oxides and hydroxides. The chemistry of volatile elements such as H, S, C, and N during meteoroid bombardment is also considered. Our conclusions about the temperature and the concentrations of impact-produced atoms in the exosphere of Mercury may be checked by the Messenger spacecraft in the near future and by BepiColombo spacecraft some years later.     

Laboratory studies on the sputtering contribution to the sodium atmospheres of Mercury and the Moon

To ascertain the importance of sputtering by solar wind ions on the formation of a sodium exosphere around Mercury and the Moon, we have irradiated with 4 keV He ions, the Na bearing tectosilicates: albite, labradorite, and anorthoclase, as well as adsorbed Na layers deposited on albite and on olivine (a neosilicate that does not contain Na). Sodium at the surface and near surface (<40 Å) was quantified with X-ray photoelectron spectroscopy before and after each irradiation to determine the depletion cross section. We measured a cross section for sputtering of Na adsorbed on mineral surfaces, σ_s ≈ 1 × 10^?15 cm² atom^?1. In addition, mass spectrometric analyses of the sputtered flux show that a large fraction of the Na is sputtered as ions rather than as neutral atoms. These results have strong implications for modeling the sodium population within the mercurian and the lunar exospheres.     

Hydrogen density in the dayside venusian exosphere derived from Lyman-α observations by SPICAV on Venus Express

A series of observations of the venusian hydrogen corona made by SPICAV on Venus Express are analyzed to estimate the amount of hydrogen in the exosphere of Venus. These observations were made between November 2006 and July 2007 at altitudes from 1000 km to 8000 km on the dayside. The Lyman-α brightness profiles derived are reproduced by the sum of a cold hydrogen population dominant below ～2000 km and a hot hydrogen population dominant above ～4000 km. The temperature (～300 K) and hydrogen density at 250 km (～10⁵ cm^?3) derived for the cold populations, near noon, are in good agreement with previous observations. Strong dawn–dusk exospheric asymmetry is observed from this set of observations, with a larger exobase density on the dawn side than on the dusk side, consistent with asymmetry previously observed in the venusian thermosphere, but with a lower dawn/dusk contrast. The hot hydrogen density derived is very sensitive to the sky background estimate, but is well constrained near 5000 km. The density of the hot population is reproduced by the exospheric model from Hodges (Hodges, R.R. [1999]. J. Geophys. Res. 104, 8463–8471) in which the hot population is produced by neutral–ions interactions in the thermosphere of Venus.     

The distribution of Titan's high-altitude (out to ∼50,000 km) exosphere from energetic neutral atom (ENA) measurements by Cassini/INCA

We report observations of Titan's high-altitude exosphere detected out to about 50,000 km altitude. The observations were made by the Ion Neutral Camera (INCA) on board the Cassini spacecraft. INCA detects energetic neutral atoms (ENA) that are formed when the ambient magnetospheric ions charge exchange with Titan's neutral atmosphere and exosphere. We find that Titan's exospheric H₂ distribution follows closely a full Chamberlain distribution including ballistic, escaping and satellite distributions. As expected, neutral densities are dominated by a satellite distribution above about 10,000 km. The maximum detectable extent of the exosphere (～50,000 km) coincides with the radius of the Hill sphere of gravitational influence from Saturn. While we find no direct indications of a neutral Titan torus with densities greater than about 1000 cm^?3, we observe interesting asymmetries in the distribution that warrants further investigation. Based on these findings we compute the average precipitating ENA flux to be about 5×10⁶ keV/(cm² s), or 8×10^?3 erg/(cm² s), which is directly comparable to that of precipitating energetic ions (Sittler, et al., 2009) and slightly higher than that of solar EUV (Tobiska, 2004). Thus, the energy deposited by precipitating ENAs must also be taken into consideration when studying the energy balance of Titan's thermosphere.     

Monte-Carlo simulation of Mercury's exosphere

Because of its proximity to the Sun and its small size, Mercury has not been able to retain its atmosphere and only a thin exosphere surrounds the planet. The exospheric pressure at the planetary surface is approximately 10⁻¹⁰ mbar, set by the Mariner 10 occultation experiment. The existence of gaseous species H, He, and O has been established by Mariner 10. In addition Na, K, and Ca have been observed by ground based instrumentation. Other elements are expected to be found in Mercury's exosphere since the total pressure of the known species is almost two orders of magnitude less than the exospheric pressure.It is intended to measure these exospheric particle densities in situ with an instrument on board of ESA's BepiColombo Mercury Planetary Orbiter (MPO) spacecraft. Since the expected exospheric densities are very small we developed a Monte-Carlo computer model to investigate if such a measurement is feasible along the MPO spacecraft orbit. We model energy and ejection angle distributions of the particles at the surface, with the emission process determining the actual distribution functions. Our model follows the trajectory of each particle by numerical integration until the particle hits Mercury's surface again or escapes from the calculation domain. Using a large set of these trajectories bulk parameters of the exospheric gas are derived, e.g., particle densities for various atomic and molecular species. Our study suggests that a mass spectrometric measurement is feasible and, at least at MPO's periherm, all species that are released from the surface will be observed.     

Mercury's exosphere origins and relations to its magnetosphere and surface

Mariner 10, the only spacecraft that ever passed close to Mercury, revealed several unexpected characteristics: an intrinsic magnetosphere, the highest mean density of any Solar System terrestrial planet and a very thin non-collisional atmosphere. Mercury's atmosphere is very poorly explored since only three atomic elements, H, He and O, were observed during the three flybys of Mariner 10. The measurements done by radio and solar occultations provided upper limits on the neutral and ion densities. These measurements pointed out the close connection between species in Mercury's exosphere and its surface, which is also the case for the Moon. Mariner 10 observations also characterized the vertical distributions and the day to night contrasts of Mercury's exosphere for its lightest components H and He (Broadfoot, A.L., et al., 1976. Mariner 10: Mercury atmosphere. Geophys. Res. Lett. 3, 577–580).More than a decade later, the first observation from a ground-based observatory of Mercury's sodium (Na) exospheric component was reported (Potter, A.E., Morgan, T.H., 1985. Discovery of sodium in the atmosphere of Mercury. Science 229, 651–653). Since then, potassium and more recently calcium have been identified in Mercury's exosphere. The bright Na resonant scattering emission has been often observed since 1985. This large set of observations is now the best source of information on Mercury's exospheric mechanisms of ejection, dynamics, sources and sinks. In particular, several of these observations provided evidence of prompt and delayed effects, both localized and global, for the very inhomogeneous Mercury's Na exosphere. These inhomogenities have been interpreted as the trace of Mercury's magnetosphere–solar wind interaction and have highlighted some of the main sources of exospheric material. Some of these features have been also interpreted as the trace of a global dayside to night side circulation of Mercury's exosphere and therefore have highlighted also the relation between exospheric production and upper surface composition.Hopefully, new sets of in situ measurements will be obtained within the next decade thanks to Messenger and Bepi-Colombo missions. Until then, ground-based observations and modelling will remain the only approaches to resolve questions on Mercury's exosphere. Mercury's exospheric composition and structure as they are presently known are described in this paper. The principal models for the main short and long times terms variations and local and global variations of Mercury's exosphere are described. The mechanisms of production and their characteristics are also given. Mercury's exosphere can also be seen as part of the coupled magnetosphere–upper surface–exosphere system and several of the links between these elements are essential to the interpretation of most of the ground-based observations. The relation between Mercury's planet composition and its exospheric composition is also considered, as is the global recycling, sources and sinks of Mercury's exosphere.     

The role of sputtering and radiolysis in the generation of Europa exosphere

The exosphere of an atmosphereless icy moon is the result of different surface release processes and subsequent modification of the released particles. At Europa icy moon, water molecules are directly released, but photolysis and radiolysis due to solar UV and Jupiter’s magnetospheric plasma, respectively, can result in OH, H, O and (possibly) H₂ production. These molecules can recombine to reform water and/or new chemical species. As a consequence, Europa’s neutral environment becomes a mixture of different molecules, among which, H₂O dominates in the highest altitudes and O₂, formed mainly by radiolysis of ice and subsequent release of the produced molecules, prevails at lower altitudes. In this work, starting from a previously developed Monte Carlo model for the generation of Europa’s exosphere, where the only considered species was water, we make a first attempt to simulate also the H₂ and O₂ components of the neutral environment around Europa, already observed by the Hubble Space Telescope and the Ultraviolet Imaging Spectrograph on board Cassini, during its flyby of Jupiter. Considering a specific configuration where the leading hemisphere coincides with the sunlit hemisphere, we estimate along the Europa–Sun line an O₂ column density of about 1.5 × 10¹⁹ m^?2 at the dayside and 3 × 10¹⁸ m^?2 at the nightside. In this work we also improve our previous estimation of the sputtered H₂O exosphere of this moon, taking into consideration the trailing–leading asymmetry in the magnetospheric ion bombardment and the energy and temperature dependences of the process yields. We find that a density of 1.5 × 10¹² H₂O/m³ is expected at altitudes ～0.1R_E above the surface of the trailing hemisphere. Additionally, we calculate the escape of H₂O, O₂ and H₂. The total number of neutral atoms in Europa’s neutral torus, is estimated to be in the range 7.8 × 10³²–3.3 × 10³³.     

Thermal infrared spectra of experimentally shocked andesine anorthosite

Andesine-rich (An_36–46) anorthosite rocks experimentally shocked to high pressures (16–57 GPa) exhibit changes in spectral features with increasing pressure in laboratory thermal infrared emission spectra (250–1400 cm^?1). These results are similar to previous studies of shocked bytownite- and albite-rich rocks, albeit with differences in absorption band centers characteristic of mineralogy and composition. Typical spectral absorptions result from Si–O antisymmetric stretch motions of the silica tetrahedral (1000–1250 cm^?1) and weaker absorptions due to Si–O–Si octahedral bending vibrations (350–700 cm^?1). Many of these features persist to higher pressures in the andesine spectra compared to similar features in measurements of shocked bytownite. This is consistent with previous thermal infrared absorption studies of shocked feldspars and likely is related to differences in density, hardness, and Al content. A transparency feature at ～832 cm^?1 observed in powdered andesine spectra also degrades with increasing pressure, intermediate between the ～828 cm^?1 and ～855 cm^?1 transparency features in spectra of powders of shocked bytownite and albitite, respectively. These data can be incorporated into thermal infrared spectral analyses of cratered planetary surfaces (or laboratory spectra of shocked samples) to help constrain the occurrence and degree of shock in plagioclase feldspars.     

Mercury's exosphere: A possible source for Na

Many ground-based observations of Na in Mercury's surface-bounded exosphere have been made and continued to be made in an effort to understand the sources, sinks, and distribution of Na around Mercury. These time consuming and costly efforts are made to better understand the physical processes on and around Mercury. A big step would be to discover an actual source of the Na from Mercury's crust because it is already known that meteorites and comets provide Na to the exosphere through impact. We provide ground-based CCD imagery obtained with small ground-based telescopes that show bright albedo features at locations coincident with enhanced Na emissions in Mercury's exosphere. We suggest these locations are sources for Na. We also provide a mechanism to test this hypothesis using in situ observations by instruments on the MESSENGER spacecraft during the three fly bys of Mercury that will occur in 2008 and 2009, and during the orbital mission which begins in 2011. It is necessary to prove that Na is delivered to the exosphere from one or more crustal source regions before exospheric Na can be used as a measure of the volatile content of Mercury used to infer formation and evolution from the primitive solar nebula. The same applies to other elements such as K which is known to be in Mercury's exosphere and S which is postulated to be present. We expound on the impact that the discovery of one or more source regions from Mercury's crust would have on our ability to discern between the three leading models of Mercury's formation and crustal evolution.     

Delivery of dark material to Vesta via carbonaceous chondritic impacts

NASA’s Dawn spacecraft observations of Asteroid (4) Vesta reveal a surface with the highest albedo and color variation of any asteroid we have observed so far. Terrains rich in low albedo dark material (DM) have been identified using Dawn Framing Camera (FC) 0.75 μm filter images in several geologic settings: associated with impact craters (in the ejecta blanket material and/or on the crater walls and rims); as flow-like deposits or rays commonly associated with topographic highs; and as dark spots (likely secondary impacts) nearby impact craters. This DM could be a relic of ancient volcanic activity or exogenic in origin. We report that the majority of the spectra of DM are similar to carbonaceous chondrite meteorites mixed with materials indigenous to Vesta. Using high-resolution seven color images we compared DM color properties (albedo, band depth) with laboratory measurements of possible analog materials. Band depth and albedo of DM are identical to those of carbonaceous chondrite xenolith-rich howardite Mt. Pratt (PRA) 04401. Laboratory mixtures of Murchison CM2 carbonaceous chondrite and basaltic eucrite Millbillillie also show band depth and albedo affinity to DM. Modeling of carbonaceous chondrite abundance in DM (1–6 vol.%) is consistent with howardite meteorites. We find no evidence for large-scale volcanism (exposed dikes/pyroclastic falls) as the source of DM. Our modeling efforts using impact crater scaling laws and numerical models of ejecta reaccretion suggest the delivery and emplacement of this DM on Vesta during the formation of the ～400 km Veneneia basin by a low-velocity (<2 km/s) carbonaceous impactor. This discovery is important because it strengthens the long-held idea that primitive bodies are the source of carbon and probably volatiles in the early Solar System.     

Self-consistent modelling of Mercury’s exosphere by sputtering, micro-meteorite impact and photon-stimulated desorption

A Monte-Carlo model of exospheres (Wurz and Lammer, 2003) was extended by treating the ion-induced sputtering process, photon-stimulated desorption, and micro-meteorite impact vaporisation quantitatively in a self-consistent way starting with the actual release of particles from the mineral surface of Mercury. Based on available literature data we established a global model for the surface mineralogy of Mercury and from that derived the average elemental composition of the surface. This model serves as a tool to estimate densities of species in the exosphere depending on the release mechanism and the associated physical parameters quantitatively describing the particle release from the surface.Our calculation shows that the total contribution to the exospheric density at the Hermean surface by solar wind sputtering is about 4×10⁷ m^-3, which is much less than the experimental upper limit of the exospheric density of 10¹² m^-3. The total calculated exospheric density from micro-meteorite impact vaporisation is about 1.6×10⁸ m^-3, also much less than the observed value. We conclude that solar wind sputtering and micro-meteorite impact vaporisation contribute only a small fraction of Mercury’s exosphere, at least close to the surface. Because of the considerably larger scale height of atoms released via sputtering into the exosphere, sputtered atoms start to dominate the exosphere at altitudes exceeding around 1000 km, with the exception of some light and abundant species released thermally, e.g. H₂ and He. Because of Mercury’s strong gravitational field not all particles released by sputtering and micro-meteorite impact escape. Over extended time scales this will lead to an alteration of the surface composition.     

Depth of faulting and ancient heat flows in the Kuiper region of Mercury from lobate scarp topography

Mercurian lobate scarps are interpreted to be the surface expressions of thrust faults formed by planetary cooling and contraction, which deformed the crust down to the brittle–ductile transition (BDT) depth at the time of faulting. In this work we have used a forward modeling procedure in order to analyze the relation between scarp topography and fault geometries and depths associated with a group of prominent lobate scarps (Santa Maria Rupes and two unnamed scarps) located in the Kuiper region of Mercury for which Earth-based radar altimetry is available. Also a backthrust associated with one of the lobate scarps has been included in this study. We have obtained best fits for depths of faulting between 30 and 39 km; the results are consistent with the previous results for other lobate scarps on Mercury.The so-derived fault depths have been used to calculate surface heat flows for the time of faulting, taking into account crustal heat sources and a heterogeneous surface temperature due to the variable insolation pattern. Deduced surface heat flows are between 19 and 39 mW m^?2 for the Kuiper region, and between 22 and 43 mW m^?2 for Discovery Rupes. Both BDT depths and heat flows are consistent with the predictions of thermal history models for the range of time relevant for scarp formation.     

Sodium atoms in the lunar exotail: Observed velocity and spatial distributions

The lunar sodium tail extends long distances due to radiation pressure on sodium atoms in the lunar exosphere. Our earlier observations measured the average radial velocity of sodium atoms moving down the lunar tail beyond Earth (i.e., near the anti-lunar point) to be ～12.5 km/s. Here we use the Wisconsin H-alpha Mapper to obtain the first kinematically resolved maps of the intensity and velocity distribution of this emission over a 15° × 15 ° region on the sky near the anti-lunar point. We present both spatially and spectrally resolved observations obtained over four nights bracketing new Moon in October 2007. The spatial distribution of the sodium atoms is elongated along the ecliptic with the location of the peak intensity drifting 3° east along the ecliptic per night. Preliminary modeling results suggest the spatial and velocity distributions in the sodium exotail are sensitive to the near surface lunar sodium velocity distribution. Future observations of this sort along with detailed modeling offer new opportunities to describe the time history of lunar surface sputtering over several days.     

An Accuracy Analysis of the SGP4/SDP4 Model

Based on the latest release of the SGP4/SDP4 (Simplified General Perturbation Version 4/ Simplified Deep-space Perturbation Version 4) model, in this paper we have designed an orbit determination program. Through calculations for the 1120 objects with various types and orbital elements selected from the space objects database, we have obtained the accuracies of the orbit determination prediction dealt with various types of space objects by the SGP4/SDP4 model. The results show that the accuracies of the near-earth objects are in the order of magnitude of 100 meters; the averages of the orbit determination accuracies of the semi-synchronous and geosynchronous orbits are, respectively, 0.7 and 1.9 km. The orbit determination accuracies of the elliptical orbit objects are related to their eccentricities. Except for few elliptical orbit objects with e > 0.8, the orbit determination errors of the vast majority of the elliptical orbit objects are all less than 10 km. By using the SGP4/SDP4 model to make 3 days predictions for near-earth objects, 30 days for semi-synchronous orbit objects, 15 days for geosynchronous orbit objects and 1 day for elliptical orbit objects, the errors of prediction generally don’t exceed 40 km.     

Dynamical and collisional evolution of Halley-type comets

The number of observed Halley-type comets is hundreds of times less than predicted by models (Levison, H.F., Dones, L., Duncan, M.J. [2001]. Astron. J. 121, 2253–2267). In this paper we investigate the impact of collisions with planetesimals on the evolution of Halley-type comets. First we compute the dynamical evolution of a sub-set of 21 comets using the Mercury integrator package over 100 Myr. The dynamical lifetime is determined to be of the order of 10⁵–10⁶ years in agreement with previous work. The collisional probability of Halley-type comets colliding with known asteroids, a simulated population of Kuiper-belt objects, and planets, is calculated using a modified, Öpik-based collision code. Our results show that the catastrophic disruption of the cometary nucleus has a very low probability of occurring, and disruption through cumulative minor impacts is concluded to be negligible. The dust mantle formed from ejected material falling back to the comet’s surface is calculated to be less than a few centimeters thick, which is insignificant compared to the mantle formed by volatile depletion, while planetary encounters were found to be a negligible disruption mechanism.     

The orbital distribution of Near-Earth Objects inside Earth’s orbit

Canada’s Near-Earth Object Surveillance Satellite (NEOSSat), set to launch in early 2012, will search for and track Near-Earth Objects (NEOs), tuning its search to best detect objects with a < 1.0 AU. In order to construct an optimal pointing strategy for NEOSSat, we needed more detailed information in the a < 1.0 AU region than the best current model (Bottke, W.F., Morbidelli, A., Jedicke, R., Petit, J.M., Levison, H.F., Michel, P., Metcalfe, T.S. [2002]. Icarus 156, 399–433) provides. We present here the NEOSSat-1.0 NEO orbital distribution model with larger statistics that permit finer resolution and less uncertainty, especially in the a < 1.0 AU region. We find that Amors = 30.1 ± 0.8%, Apollos = 63.3 ± 0.4%, Atens = 5.0 ± 0.3%, Atiras (0.718 < Q < 0.983 AU) = 1.38 ± 0.04%, and Vatiras (0.307 < Q < 0.718 AU) = 0.22 ± 0.03% of the steady-state NEO population. Vatiras are a previously undiscussed NEO population clearly defined in our integrations, whose orbits lie completely interior to that of Venus. Our integrations also uncovered the unexpected production of retrograde orbits from main-belt asteroid sources; this retrograde NEA population makes up ?0.1% of the steady-state NEO population. The relative NEO impact rate onto Mercury, Venus, and Earth, as well as the normalized distribution of impact speeds, was calculated from the NEOSSat-1.0 orbital model under the assumption of a steady-state. The new model predicts a slightly higher Mercury impact flux.     

No evidence for a decrease of nuclear decay rates with increasing heliocentric distance based on radiochronology of meteorites

It has been argued that the decay rates of several radioactive nuclides are slightly lower at Earth’s aphelion than at perihelion, and that this effect might depend on heliocentric distance. It might then be expected that nuclear decay rates be considerably lower at larger distances from the sun, e.g., in the asteroid belt at 2–3 AU from where most meteorites originate. If so, ages of meteorites obtained by analyses of radioactive nuclides and their stable daughter isotopes might be in error, since these ages are based on decay rates determined on Earth. Here we evaluate whether the large data base on nuclear cosmochronology offers any hint for discrepancies which might be due to radially variable decay rates. Chlorine-36 (t_1/2 = 301,000 a) is produced in meteorites by interactions with cosmic rays and is the nuclide for which a decay rate dependence from heliocentric distance has been proposed, which, in principle, can be tested with our approach and the current data base. We show that compilations of ³⁶Cl concentrations measured in meteorites offer no support for a spatially variable ³⁶Cl decay rate. For very short-lived cosmic-ray produced radionuclides (half-lives < 10–100 days), the concentration should be different for meteorites hitting the Earth on the incoming vs. outgoing part of their orbit. However, the current data base of very short-lived radionuclides in freshly fallen meteorites is far from sufficient to deduce solid constraints. Constraints on the age of the Earth and the oldest meteorite phases obtained by the U–Pb dating technique give no hints for radially variable decay rates of the α-decaying nuclides ²³⁵U or ²³⁸U. Similarly, some of the oldest phases in meteorites have U–Pb ages whose differences agree almost perfectly with respective age differences obtained with “short-lived” radionuclides present in the early solar system, again indicating no variability of uranium decay rates in different meteorite parent bodies in the asteroid belt. Moreover, the oldest U–Pb ages of meteorites agree with the main-sequence age of the sun derived from helioseismology within the formal ∼1% uncertainty of the latter. Meteorite ages also provide no evidence for a decrease of decay rates with heliocentric distance for nuclides such as ⁸⁷Rb (decay mode β⁻) ⁴⁰K (β⁻ and electron capture), and ¹⁴⁷Sm (α).     

Exosphere generation of the Moon investigated through a high-energy neutral detector

Observation of the lunar exosphere is a tool for remote sensing of the surface properties. The sources of this exosphere are related to the interactions of the lunar surface with the solar radiation, with the solar wind or Earth??s magnetospheric plasma, and with the interplanetary dust and meteorites. In fact, the exospheric particles are continuously created and subsequently lost in the interplanetary space, photo-ionized or re-adsorbed by the surface. Eventually, the estimation of the surface composition is not possible without the knowledge of the active release mechanisms. The relative weight of the different release processes of the various atoms, ions and molecules from the surface is still an open debate. Investigation of the Moon??s release processes and interaction with the near-Earth environment is of crucial importance for both determining the relative process release contribution and understanding the surface evolution of other airless bodies, like Mercury and the giant planets?? moons. In this work, an attempt to analyze the processes that take place on the surface of these small airless bodies, as a result of their exposure to the space environment, has been realized by means of the MonteCarlo Environment Simulation Tool (EST), applied to the Moon. The model results show that the different release processes can be identified by analysing the exospheric energy distribution. Finally, the instrument concept of the ??Analizzatore Lunare di ENA?? (ALENA), part of the MAGIA payload and specifically designed for detecting the high-energy particles released from the lunar surface is presented.     

Chemical abundance analysis of the Be star HD 171054

In this work the results of a spectroscopic study of the southern field narrow-line Be star HD 171054 are presented. High dispersion and signal-to-noise ratio spectra allowed the estimation of the fundamental photospheric parameters such as the projected rotational velocity, effective temperature and superficial gravity from non-LTE stellar atmosphere models. From these parameters and microturbulence, the abundances of He, C, N, O, Mg, Al and Si for this object are estimated. Results show that C is depleted whereas N is overabundant compared with the sun and OB stars in the solar vicinity. Oxygen and helium are close to the solar value. Magnesium is down by 0.43 dex and aluminium and silicon are overabundant.