太行山南段自立庄韧性剪切带变形特征

太行山南段临城自立庄地区古元古界甘陶河群中低级变质岩中发育一条左行逆冲型韧性剪切带。自立庄韧性剪切带出露长约10 km,宽约1 km,走向NNE,往西缓倾,在EW方向上由若干条强变形带与其间的弱变形域或岩块组成,平面上呈现平行式的组合特征。该韧性剪切带内发育糜棱岩、拉伸线理和皱纹线理、不对称褶皱、石香肠构造和构造透镜体、S-C面理和旋转碎斑等宏观和微观构造。S-C面理、旋转碎斑、不对称褶皱等宏微观变形特征一致表明自立庄韧性剪切带上盘由西往东逆冲的运动学性质。在对韧性剪切带宏观、微观构造特征研究基础上,结合区域资料,认为自立庄韧性剪切带的形成与华北克拉通古元古代末期西部陆块与东部陆块的EW向碰撞拼合有关,是18.5 Ga吕梁运动的产物。自立庄韧性剪切带的厘定为太行山南段古元古代构造演化提供了基础资料。     

龙滩水电站左岸蠕变体B区边坡位移监测分析

结合地下水位监测与降雨量监测结果,对龙滩水电站左岸蠕变体B区边坡位移监测资料进行综合分析,认为边坡蠕变岩体位移主要发生在高程520m以上,且强风化线或蠕变岩体折断面控制着边坡岩体的变形,由于边坡排水、坡体压脚,岩体变形速率逐渐变小,目前已经基本稳定。应加强边坡强风化线或蠕变岩体折断面附近的位移监测,特别是蓄水期监测;同时要保证地表和地下排水系统的正常运行。     

上明峪金矿地质特征及其与大河南岩体的关系

太行山北部的大河南岩体内部分布有一些金矿床及大量金矿化点,其中最具代表性的是上明峪金矿。大河南岩体侵位之后,遭受了强烈的构造运动,形成了近ＳＮ向和近ＥＷ向的两组断裂构造,断裂构造的活动使岩石强烈破碎形成破碎蚀变岩,岩浆热液萃取了花岗岩中的成矿元素并将其搬运至断裂带内,这种富含成矿元素的岩浆热液在断裂带中与天水混合,导致热液中的成矿元素沉淀形成矿化。上明峪金矿的形成是岩浆热液与天水共同作用的结果。     

A new approach to time-load-deformation-stress hypersurface of rocks to stability analysis of underground openings

The most important developments in rock engineering are about time-dependent deformation behavior of rocks under different loads. Many studies have been done for the purpose of identifying mathematically time-load-deformation (TLD) characteristics of the rocks. These studies have made an important contribution to the research on the stability of constructions built in rock masses, and rock material is the main part of the rock mass in which the engineering constructions. When considered from this point of view, the time-dependent deformation behavior of the rocks under different loads is important to determine unstable conditions of the rock constructions in the long term. Researches in rock masses use surfaces based on TLD data. On the other hand, the strength of the rock is also part of these analyzes. The new model developed in this study has four variables such as time, load, deformation, and strength. Therefore, TLD surfaces developed for time-load-deformation has been associated with another variable and three-component (TLD) surfaces eventually transformed into four-component (time-load-deformation-strength; TLDS) hypersurfaces. Hypersurfaces, which illustrate new TLDS behaviors of the rocks, developed in underground openings in different rock constructions in different areas. It is thought that the TLDS hypersurfaces will especially be contributed to the numerical modeling studies of rock construction analysis.     

Shear criteria in granite and migmatite deformed in the magmatic and solid states

Microstructural criteria for the determination of the sense of shear in rocks homogeneously deformed in the partially melted state are similar to those which apply to solid-state deformation. Sense of shear determination is either direct, deduced from the sense of rotation of markers, or indirect, involving the obliquity between the shear and foliation planes, or between the successive foliations imprinted at different stages of progressive deformation.This study is a by-product of the detailed structural and microstructural investigation of a high-grade metamorphic rock pile (Variscan Vosges Massif, France) which underwent subhorizontal shearing during partial melting and further solidification. Depending on the rock chemistry, on the position in the pile and the relative timing of progressive deformation, layered migmatites and homogeneous granites were variously deformed in the partially melted and solid states. The sense of shear obtained from these rock types, using the criteria presented here, consistently gives a top to SW direction.     

大跨度采空影响顺倾构造山体侧向变动的复合机理

采空区地表山体侧向变动,不同于一般天然山坡,也与采空区一般上覆岩层的变形破坏有异;它是二者复合机理的效应。本文在分析考察了毗邻电厂的横山顺倾构造山体,剖析了地下采空情况后认为,山体侧向变动中,软弱夹层有决定性作用;变动范围、速率与规模,与地下采空有关。从而又利用地质力学模型试验和数值模拟,探索了采动引起山体应力场及变动规律。结果表明,山体岩层的变形、位移、破坏,由直接顶板向地表发展;采空坍陷诱发了软弱夹层的蠕滑,则产生山体侧向滑移;电厂区地表隆起变形是山体侧向滑移挤压地基土的反映。通过现场实际调究、变形观测资料分析与数值模拟和模型试验的对比研究,提出了坍落拱梁的成生效应、挤压蠕滑效应、失稳效应;揭露了顺倾构造山体在采空影响下,具有地表、地下的复合临空面的复合应力场中复合变动的复合机理;并提出这种山体侧向变动机理的典型地质模式,借以论证山体稳定性。     

一种模拟岩石蠕变的数值流形方法

为了保障岩土工程结构能长期正常使用,需要对其蠕变变形进行分析。“时步-初应变”法是一种常用的计算岩石蠕变的方法。数值流形方法是一种新兴的数值计算方法,常用于计算节理岩体的变形,但尚未被试用于计算蠕变变形。在原数值流形方法的程序中增加了基于“时步-初应变”法的计算模块,通过对广义开尔文模型进行的模拟,显示新程序可以正确反映岩石的黏弹性蠕变趋势,并能够计算包含节理的岩体的蠕变变形,改进后的数值流形方法不但能够模拟岩石的线弹性变形,而且可以模拟岩石的黏弹性蠕变,比原流形方法更能全面地模拟岩石的变形,扩展了数值流形方法在岩土工程中的使用范围。     

大别山石马地区超高压变质岩角闪岩相变形的Rb-Sr同位素年龄及其构造意义

角闪岩相变形是大别山超高压变质岩的主期变形 ,露头和显微尺度的构造要素主要由这期变形产生 ,通过对超高压变质岩带内韧性剪切带中花岗片麻岩的Rb -Sr同位素年龄测定 ,获得一条变形花岗片麻岩的全岩 -白云母内部等时线年龄 ,表明超高压变质岩的角闪岩相变形产生于180Ma左右 ,超高压变质岩的主期变形确实为同角闪岩相变质期变形 ,该年龄与超高压变质岩的第二次快速冷却年龄一致 ,由此证实超高压变质岩在180Ma左右快速从下地壳折返至中地壳     

参数型岩石几何损伤模型的构建及其应用研究

岩石几何损伤模型是建立统计损伤本构模型的重要基础。在岩石变形力学特性基础上对现有岩石几何损伤模型进行了回顾性分析,针对它们难以较好地反映初始损伤特征和峰后变形破坏特征的缺陷与不足,首先,将岩石材料视为由未损伤部分、初始损伤部分和后继损伤部分组成,提出了考虑初始损伤的岩石几何损伤模型;然后,通过探讨Weibull分布参数m和F0对损伤变量变化产生的影响,构建了参数型岩石几何损伤模型,在此基础上建立了应变软化类岩石统计损伤本构模型并进行了修正,给出了模型参数的确定方法;最后,通过模型验证和参数分析表明,修正后模型能够较好地模拟岩石变形破裂全过程,参数l和h对损伤变量变化产生的影响与m和F0等效,解决了现有岩石几何损伤模型存在的共性问题,该模型和方法具有一定的合理性和可行性。     

柴北缘西段古近纪物源体系分析

沉积区物源分析对研究造山带构造演化、盆地沉积过程及划分油气区带等方面具有重要的意义。为了查明柴达木盆地北缘构造带古近纪物源方向,通过对古近系碎屑岩的碎屑组成、岩屑成分、重矿物组合特征和ZTR指数的研究,并结合前人的研究成果,初步确定古近纪柴北缘西段发育五大主力物源区:(1)牛东物源主要来自阿尔金山东段,重矿物组合以稳定且含量较高的电气石区别于邻区,碎屑组分中以石英和含量较高的长石为特征,岩屑中含有少量的碳酸盐岩岩屑;(2)冷北物源主要来自小赛什腾山方向,重矿物组合中榍石和赤铁矿的含量明显偏高,碎屑组分中以高岩屑为特征;(3)赛西物源主要来自赛什腾山西段,电气石和角闪石含量较高,碎屑组分较为均一,母岩以变质岩和火成岩为主,含少量碳酸盐岩岩屑;(4)赛东物源主要来自赛什腾山东段,其白钛矿含量明显高于邻区,碎屑组分以较高含量的石英和长石为主,岩屑类型主要为变质岩、火成岩和沉积岩岩屑;(5)九龙山物源主要来自九龙山和绿梁山地区,石榴石含量高且稳定,碎屑组分较为均一,母岩以变质岩和火成岩为主,含少量的非碳酸盐岩类沉积岩岩屑。     

软硬相间层状复杂岩体综合变形模量原位试验研究

某拟建大型电站坝基岩体为一套河湖相沉积岩,包含了砾岩、砂岩、粉砂岩和泥岩等多种岩性岩体。不同岩体变形参数各异,常规变形试验只能获得单一岩性岩体的变形模量,而这种软硬相间层状复杂岩体的综合变形模量是与单一岩性岩体变形模量、岩层倾角、岩层厚度多个因素相关的,如何通过试验获得这种复杂组合岩体的综合变形模量是一个重要问题。本文首先对坝址区不同岩性所占的比例进行了详细的统计,获得砂岩、粉砂岩和泥岩的厚度比为6:2.5:1.5,根据这一统计结果在坝轴线附近选择含有砂岩、粉砂岩和泥岩三种岩体的大型变形试验区,将承压板尺寸设定为200cm37cm,承压板就能同时覆盖砂岩、粉砂岩和泥岩三种岩体,且将其厚度比确定为6:2.5:1.5。通过在承压板上施加大荷载（250余吨）将应力传至下部多层岩体,从而获得软硬相间层状复杂岩体的综合变形模量。试验结果表明坝基弱下风化岩体的综合变形模量可达到7.0GPa,已经满足筑坝的要求。通过原位试验成功地论证了坝基岩体综合变形模量量值的问题。      

东南极拉斯曼丘陵地区变质杂岩的层序与构造变形过程

东南极拉斯曼丘陵地区位于兰伯特裂谷东缘普里兹湾东岸,该地区主要出露一套麻粒岩相变质岩,前期对原岩时代、变质过程等进行了详细研究,但是对于变质杂岩的层序和变形过程研究相对薄弱。文章通过大比例尺地质填图,发现拉斯曼丘陵地区变质杂岩总体成层有序,在此基础上建立拉斯曼岩群,并将其划分成6个岩组,原岩形成时代为中元古代。拉斯曼岩群经历了格林维尔期和泛非期变质作用的叠加,变质程度均达到高角闪岩相-麻粒岩相。拉斯曼丘陵地区主体构造线方向为北东东—南西西方向,总体上构成往北东东方向翘起的复式向斜构造,几个岩组的分布也显示由东向西逐渐变新。东部米洛半岛一带明显叠加了北北西—南南东向的构造变形。研究表明,拉斯曼岩群经历了6次重要的构造变形,包括新元古代格林维尔期(D1)、新元古代—早古生代泛非期变质变形作用(D2,D3,D4,D5)以及中新生代伸展作用(D6)。目前岩石中保存的主变形面理是格林维尔期和泛非期两次构造热事件的复合型面理,主要是泛非事件形成,格林维尔期变形面理呈残留状。综合拉斯曼岩群变质年龄及早古生代进步花岗岩体形成时代,认为D2~D5变形时代为550~500 Ma左右。因此,拉斯曼丘陵地区变质变形特征显示,中元古代拉斯曼岩群经历了格林维尔期和泛非期两次重要的造山作用,以及冈瓦纳大陆的裂解。      

Deformation Style of Slickenlines on Mélange Foliations and Change in Deformation Mechanisms Along Subduction Interface: Example from the Cretaceous Shimanto Belt, Shikoku, Japan

Accretionary complexes record the histories of changes in physical properties of sediments from unlithified sediments to lithified rocks through the deformation processes along subduction interface. The trench sediment suffered various deformation of particulate flow, pressure solution deformation and cataclastic faultings from ductile to brittle regime during accretion in subduction zone. Tectonic mélange is a characteristic rock in on-land accretionary complexes. The dominant deformation mechanism of tectonic mélange formation is pressure solution on the basis of microscopic observation. However, brittle slickenlines are also commonly observed on mélange foliations at the outcrop scale. Although the slickenlines as a brittle failure is common on the surface of the pressure solution foliation, the relationship of their kinetic are still uncertain. Detailed observations of slickenlines suggest that they are formed by reactivation of the mélange foliations, which indicates that the slickenlines are developed after formation of block in matrix texture characterized in mélange. In addition, mélange foliations are cut by faults related to underplating of oceanic materials. Therefore, formation of slickenlines occur before underplating in a relatively deep portion along subduction interface. On the basis of P-T conditions reported from other parts of the Cretaceous Shimanto Belt, the mélange formation and underplating is inferred to have occurred around the seismic front or within the seismogenic zone. The change in deformation mechanisms from pressure solution to brittle failure may be the first change in physical properties from plastic to brittle around seismic front.     

ISOTOPIC GEOCHRONOLOGY OF GRANITOIDS FROM THE NORTHWESTERN TIBET

ISOTOPIC GEOCHRONOLOGY OF GRANITOIDS FROM THE NORTHWESTERN TIBET     

分形节理岩体强度与变形尺度效应的试验研究

根据强度与变形尺度效应的研究需要,试验研究了脆性岩石相似模拟材料的配比,提出了预置材料产生模拟节理的方法,解决了随机分布节理试件的制作问题。采用分形分布节理模拟材料试件,研究了脆性岩体轴向抗压强度与变形的尺度效应,获得的规律与实际岩体尺度效应规律一致,并发现岩体变形的尺度效应并非完全由节理闭合和剪切破坏引起,在节理剪切破坏之前,主要是由节理的剪切变形增大引起的。     

Complex microstructures preserved in rocks with a simple matrix: significance for deformation and metamorphic processes

Schists from the foothills of the Central Sierra Nevada contain one dominant matrix foliation and yet four phases of growth of both cordierite and andalusite porphyroblasts can be distinguished. These occurred early during four separate deformation events that formed successive steep and shallow foliations. A fifth deformation event pre-dates the growth of all porphyroblasts studied. The multiple phases of porphyroblast growth allow correlation of structures across and along the region. A repeated pattern of deformation, in terms of the curvature of earlier foliations against the overprinting one, allows samples containing porphyroblasts with simpler inclusion trail geometries to be interpreted with confidence. The large-scale fold structures in this region formed before or during the second of the five deformation events recorded by the porphyroblasts. However, the matrix foliation is predominantly a product of the fourth deformation, which has commonly reactivated or re-used older foliations, and is dominated by east-side-up shear. The intervening third deformation produced locally intense foliations and was accompanied by top-to-the-east shear. The very weak fifth deformation produced weak crenulations with subhorizontal axial planes and was coaxial. Multiple phases of episodic but synchronous growth of cordierite and andalusite were produced by the KFMASH univariant equilibrium Ms+Chl+Qtz=And+Crd+Bt+H₂O. The rocks crossed this reaction at a pressure just below the intersection with the KFMASH divariant equilibrium Ms+Chl+Qtz=Crd+Bt+H₂O; the latter being overstepped in favour of the former as there is no evidence for cordierite growth prior to andalusite in these rocks. Subsequent multiple episodes of synchronous growth of cordierite and andalusite indicate that the possible variation in P–T during subsequent deformations was not large. This requires the high-amplitude macroscopic fold to form prior to porphyroblast growth and then be simply tightened and modified by the younger deformations.     

Combining compositional zoning and foliation intersection axes (FIAs) in garnet to quantitatively determine early P-T-t paths in multiply deformed and metamorphosed schists: north central Massachusetts,USA

Quantitative compositional and microstructural analysis of garnet porphyroblasts in kyanite–staurolite–garnet grade rocks from the northeastern flank of the Pelham dome, north central Massachusetts, distinguishes the effects of Acadian deformation and metamorphism from extensive overprinting Alleghanian shearing. The P–T conditions and the metamorphic path during the Acadian were determined using samples preserving well defined stages in a lengthy tectonic history revealed by a succession of five foliation intersection axis trends preserved within porphyroblasts (FIAs). This Acadian succession extends at least 120 km to the north into rocks where no evidence has been found of an Alleghanian overprint. For each sample where garnet first nucleated during one of these stages in the tectonic history, the PT of core growth was determined by plotting the intersection of the Mn, Fe and Ca isopleths calculated for the core composition on a P–T pseudosection for that sample using THERMOCALC. Combining the PT data from all these samples indicates that the temperature and pressure increased throughout Acadian orogenesis, causing episodic garnet growth. During the Alleghanian, locally intense shearing, especially against the margin of the Pelham dome, formed the dominant schistosity, which truncated all foliations defined by inclusion trails in porphyroblasts and obliterated all remains of Acadian deformation and metamorphism in the rock matrix. Shearing was accompanied by near complete homogenization of the compositional zoning in garnet porphyroblasts and an associated apparent increase in the temperature of the matrix to 700°C in those rocks lying directly adjacent to the Pelham dome, and resulted from the rocks of the Northfield syncline being thrust a large distance southwards over the gneisses in the dome.     

Structures of Syn-deformational Granites in the Longquanguan Shear Zone and Their Monazite Electronic Microprobe Dating

The Longquanguan shear zone is an important structural belt in the North China Craton, separating the underlying Fuping complex from the overlying Wutai complex. This shear zone has experienced three episodes of deformation： the first and main episode is a ductile top-to-ESE shear along the gently northwest-west dipping foliations, while the other two episodes are later collapse sliding. Prolonged granites parallel to the shear foliations make one of the main compositions of the Longquanguan shear zone. These granites experienced deformation to form mylonitic rocks when they emplaced during the first episode of deformation. Structural characters of the granites and their contacts to the country rocks indicate that these granites possibly resulted from in-situ partial remelting by shearing, i.e., they are syn-deformational granites. Monazites in these mylonitic granites are magmatic minerals and their crystallization ages may represent ages of the magmatic events, and also the ages for the main deformation of the Longquanguan shear zone. Monazite electronic microprobe dating were carried on two samples of granite, which gives multiple peak ages, among which 1,846 Ma and 1,877 Ma are the main peak ages for the two samples. These ages represent the main deformation of the Longquanguan shear zone, which is consistent with the main regional geological event at about 1,850 Ma caused by the collision between the Eastern and Western Blocks in North China. The good match between the monazite ages and the corresponding regional tectono-thermal events shows the feasibility and reliability of monazite electronic microprobe dating.     

大别山的变质碰撞混杂岩——以东部为例

大别山是中国东部中朝大陆板块与扬子大陆板块之间的碰撞造山带。具有薄皮构造的性质。组成两个碰撞大陆之间的滑脱（冲断剪切）带的岩石就是碰撞混杂岩组合。大别山由于剥露较深,仰冲壳楔完全被剥蚀,超高压变质带大面积出露,识别出碰撞混杂岩组合是对大别山进行几何分析的必要步骤。大别山碰撞混杂岩组合可分为南北两部分。北部为条带状片麻岩-超镁铁岩组合,南部为云母斜长片麻岩-榴辉岩组合,这两个组合的大部分都经历过超高压变质作用。它们的共同特点是具有宏观的＂碎斑结构＂和混杂作用。罗田穹隆是造山过程中早期形成的双冲式背斜,最后在造山晚期因东西向缩短的叠加而形成穹隆。     

龙首山岩带典型镁铁-超镁铁质岩体岩石地球化学特征

通过龙首山岩带中几个典型镁铁-超镁铁质岩体样品的岩石地球化学分析,对金川超镁铁质岩体与其外围镁铁-超镁铁质岩体的形成演化关系进行探讨,结果发现:这些岩体处于相同的构造环境,样品点整体为亚碱性拉斑玄武岩系列,随M g#值的增加,C aO,A l2O3,N a2O,K2O值具有连续减少的趋势,指示了它们存在连续的岩浆演化关系;稀土与微量元素分析,蛛网图整体具有右倾特征,龙首山岩带中段岩体有明显δEu负异常,东、西段岩体样品有δEu正异常或无异常,暗示中段岩体较外围岩体经历了更完全的分离结晶作用;结合前人对金川所做的S r-N d同位素等资料,证明金川岩体的岩浆源区为富集型地幔。