基于云模型和关联度分析法的土地评价因素权重挖掘

采用云模型，将土地评价因素指标的自然语言描述映射为可细微变化的不同云滴，利用云不确定性推理，实现定性和定量的合理转换。在此基础上，结合关联度分析法，提出了一种新的土地评价影响因素权重获取方法，并给出了实验结果。     

利用误差熵评价光斑中点云不确定性

三维激光扫描点位精度受光斑影响较大,激光点在光斑中呈现了不确定性,该不确定性的准确描述关系到激光点位精度的评价。将误差熵模型引入到点位不确定性的评价中,利用激光点位在光斑中不确定性的概率密度函数,推导了激光点位信息熵,并依据误差熵与信息熵的关系得到了激光点位的误差熵。通过分析误差熵与光斑面积的关系,得到点云光斑平均误差熵,实现了将平均误差熵引入到点云不确定性的评价中。通过设置不同扫描间隔得到的点云数据,分析了平均熵模型进行基于光斑影响下的点云精度评价的可行性,最终实现了对光斑中点云不确定性的准确评价。     

机载多光谱LiDAR数据的地物分类方法

机载多光谱LiDAR系统能够快速地获取大范围地表面上地物光谱和几何数据,并能够保证所获取的光谱与空间几何数据在空间和时间上相对完整和一致性。支持向量机（SVM）是一种基于小样本的学习方法,它避开了从归纳到演绎的传统分类过程。因此,本文提出了基于SVM多光谱LiDAR数据的地物目标分类方法。该方法首先将多个独立波段的LiDAR数据融合为单一的、包含多个波段信息的点云数据,然后将融合后的点云内插为距离影像和多光谱影像,最后利用SVM进行多光谱LiDAR数据的地物覆盖分类。通过对加拿大Optech公司的Titan机载多光谱LiDAR数据的试验证明：相对于传统的单波段LiDAR数据,多光谱LiDAR数据可以获得较好的地物分类精度;比较试验发现SVM分类方法适用于多光谱LiDAR数据的地物分类。     

GIDS空间插值法估算云下地表温度

选用陆面区域温度最佳空间插值法—梯度距离平方反比法(GIDS),为近似估算云下地表温度提供了可能。实验选取暖季南京江宁地区ETM+影像和ASTERGDEMV1高程数据,探索分析GIDS估算云下地表温度的可行性和可信性。对14种空间大小云覆盖区实验研究表明:利用GIDS插值估算云下地表温度具有可行性,且估算误差随着云覆盖区范围增大而增加,其最大MAE<0.9℃,最大RMSE<1.2℃,并在云覆盖区小于100×100像元时,最大MAE<0.8℃、RMSE<1℃;插值精度与最近邻无云像元典型代表性、区域内空间复杂度和地表覆盖类型均有关,存在不稳定性和动态性;云下NDVI均方差与MAE、RMSE有着一致变化趋势,借助NDVI均方差指示云下地表空间异质性及NDVI–LST负相关性,可对插值结果进行可信性评判,以避免插值结果盲目应用,推进和提升地表温度产品应用价值。     

高潜水位矿区采煤沉陷地DEM的无人机构建方法

针对高潜水位矿区采煤沉陷地植被密度大、无人机摄影测量难以获取地面点云的问题,从采煤沉陷地地形特征出发,提出了一种基于断面式点云滤波和DEM模型修正的采煤沉陷地DEM构建方法,经分析,精度可达到1：500比例尺地形图要求,可以为采煤沉陷地损毁评价和土地复垦工作开展提供重要依据。     

基于云计算的国土资源信息化建设研究

通过对目前的部分云计算的相关实现研究,对基于主流云平台打造的国土资源信息化建设进行研究和实践,提供了一种全新的方式改变国土资源信息化建设的方式、方法和效率,对未来基于云计算来快速实现更大规模的、更有伸缩性国土资源信息化建设提供了借鉴意义。     

体现主客观信息的土地定级因素综合集成赋权法研究

应用云模型、特尔斐法、关联分析法研究了土地定级中各影响因素的合理赋权问题，提出了体现主客观信息的土地定级因素综合集成赋权方法，并依据武汉市土地定级指标体系和有关数据，对武汉市土地定级影响因素进行了权重挖掘。     

基于深度卷积神经网络的云检测方法

本文将Fmask云检测结果作为标记样本对深度卷积神经网络进行训练以实现云检测.在仅利用可见光波段和近红外波段的前提下,本文方法的云检测总体精度达到87.65％,高于Fmask的86.92％,而且单景Landsat 8影像的识别用时18 s,远低于Fmask的72 s,具有更高的精度和效率.另外,该方法适用于不同的地表土...     

江苏省国土资源档案在线协同管理平台关键技术研究

本文在分析江苏省国土资源厅档案管理面临困境的基础上,提出了档案在线协同管理平台的建设构想。、在介绍平台总体框架、功能框架和运行框架的基础上,重点阐述了平台建设的关键技术,并进一步提出平台深化建设、推广应用的设想。     

融合多光谱影像的高光谱影像厚云去除方法

云遮挡对高光谱影像的应用造成了不可忽视的影响。现有云去除方法通常利用时域近邻的同源影像提供辅助信息。然而,高光谱影像(如GF-5和EO-1高光谱影像)较低的时间分辨率导致同源辅助影像中可能存在较大的地物覆盖变化。时间分辨率更高的多光谱影像(如Landsat 8 OLI影像)能提供时间上更接近于高光谱云影像的辅助信息,从而减少地物覆被变化带来的影响。为应对高光谱和多光谱波段之间差异较大的问题,本文基于空谱随机森林(spatial-spectral-based random forest,SSRF)方法,提出一种利用多光谱影像(Landsat 8 OLI影像)对高光谱影像进行厚云去除的方法,将其简记为SSRF_M。SSRF_M较强的非线性拟合能力使其能够综合利用多光谱影像所有波段的有效数据对各个高光谱波段进行重建。本文使用GF-5和EO-1高光谱影像进行模拟云去除试验,视觉和定量评价结果均表明,与利用时间间隔更长的同源辅助影像的方法相比,本文方法能获得更高精度的云下信息重建结果。     

A cloud mask methodology for high resolution remote sensing data combining information from high and medium resolution optical sensors

This study presents a novel cloud masking approach for high resolution remote sensing images in the context of land cover mapping. As an advantage to traditional methods, the approach does not rely on thermal bands and it is applicable to images from most high resolution earth observation remote sensing sensors. The methodology couples pixel-based seed identification and object-based region growing. The seed identification stage relies on pixel value comparison between high resolution images and cloud free composites at lower spatial resolution from almost simultaneously acquired dates. The methodology was tested taking SPOT4-HRVIR, SPOT5-HRG and IRS-LISS III as high resolution images and cloud free MODIS composites as reference images. The selected scenes included a wide range of cloud types and surface features. The resulting cloud masks were evaluated through visual comparison. They were also compared with ad-hoc independently generated cloud masks and with the automatic cloud cover assessment algorithm (ACCA). In general the results showed an agreement in detected clouds higher than 95% for clouds larger than 50 ha. The approach produced consistent results identifying and mapping clouds of different type and size over various land surfaces including natural vegetation, agriculture land, built-up areas, water bodies and snow.     

LiDAR测量点云融合影像的分块滤波方法

针对现有LiDAR地面点滤波算法对复杂地形地物适应性不强的问题,本文提出了一种融合点云与地面影像分块滤波的方法。首先,将地面影像与点云匹配,使点云从影像中获取更多的光谱纹理信息。然后,分析地物光谱、林地相对密度、点云高程特征、地面DSM模型及其坡度,并基于决策级融合将原始点云切割成若干独立的区块。最后,根据每块区域不同的多元细节特征,对IPTD滤波算法进行改进并利用搜索法优化参数,得到最优且稳健的结果。利用滤波后的总地面点通过插值算法得到的DEM模型和相关试验验证了本文算法的优越性。     

A combined spectral and object-based approach to transparent cloud removal in an operational setting for Landsat ETM+

The automated cloud cover assessment (ACCA) algorithm has provided automated estimates of cloud cover for the Landsat ETM+ mission since 2001. However, due to the lack of a band around 1.375 μm, cloud edges and transparent clouds such as cirrus cannot be detected. Use of Landsat ETM+ imagery for terrestrial land analysis is further hampered by the relatively long revisit period due to a nadir only viewing sensor. In this study, the ACCA threshold parameters were altered to minimise omission errors in the cloud masks. Object-based analysis was used to reduce the commission errors from the extended cloud filters. The method resulted in the removal of optically thin cirrus cloud and cloud edges which are often missed by other methods in sub-tropical areas. Although not fully automated, the principles of the method developed here provide an opportunity for using otherwise sub-optimal or completely unusable Landsat ETM+ imagery for operational applications. Where specific images are required for particular research goals the method can be used to remove cloud and transparent cloud helping to reduce bias in subsequent land cover classifications.     

江苏沿海滩涂利用模式遥感影像解译和时空变化分析

为了弄清江苏沿海滩涂利用模式分布情况,定量分析其时空变化趋势,本文基于Google Earth Engine云计算平台和Landsat卫星遥感影像数据,结合随机森林分类方法,通过机器学习建立了滩涂利用模式自动识别分类方法,样本训练后识别准确率达93％以上.利用该方法提取了2002年、2014年和2019年江苏沿海的土地...     

基于路径预测的不确定性推理组合地图匹配算法

地图匹配是车辆导航系统中的重要组成部分。本文在简要介绍相关地图匹配算法和总结前期研究的基础上,提出了一种新的基于预测的不确定性推理组合地图匹配算法。该方法首先利用云模型这样一种处理定性与定量间不确定转换的工具,通过对当前信息的不确定性推理,计算定位点相对于候选道路的匹配可信度。之后,利用隐马尔科夫模型预测驾驶员出行路径及目的地,通过对模型中的观察值函数重新设定,将路径预测信息与当前地图匹配算法结合,构建组合地图匹配算法。同时,采用学习算法更新模型中的信息。最后,通过仿真实例证明了该组合算法的有效性,结果表明：该方法能够预测驾驶员行驶路径,起到预匹配的作用,提高了地图匹配算法的精度与实时性。     

Evaluation of a rule-based compositing technique for Landsat-5 TM and Landsat-7 ETM+ images

Image compositing is a multi-objective optimization process. Its goal is to produce a seamless cloud and artefact-free artificial image. This is achieved by aggregating image observations and by replacing poor and cloudy data with good observations from imagery acquired within the timeframe of interest. This compositing process aims to minimise the visual artefacts which could result from different radiometric properties, caused by atmospheric conditions, phenologic patterns and land cover changes. It has the following requirements: (1) image compositing must be cloud free, which requires the detection of clouds and shadows, and (2) the image composite must be seamless, minimizing artefacts and visible across inter image seams. This study proposes a new rule-based compositing technique (RBC) that combines the strengths of several existing methods. A quantitative and qualitative evaluation is made of the RBC technique by comparing it to the maximum NDVI (MaxNDVI), minimum red (MinRed) and maximum ratio (MaxRatio) compositing techniques. A total of 174 Landsat TM and ETM+ images, covering three study sites and three different timeframes for each site, are used in the evaluation. A new set of quantitative/qualitative evaluation techniques for compositing quality measurement was developed and showed that the RBC technique outperformed all other techniques, with MaxRatio, MaxNDVI, and MinRed techniques in order of performance from best to worst.     

基于云模型的影像地图质量综合评估

利用云模型定性和定量之间的转换关系,提出了基于云模型理论的影像地图质量综合评估模型,建立了二级指标的综合云模型、评语集的梯形云模型、最终评价模型等,将影像地图的质量评价结果以概率分布的形式给出。经实例证实,该模型的评价结果直观、可靠,更加符合实际。     

Toward accountable land use mapping: Using geocomputation to improve classification accuracy and reveal uncertainty

The classification of satellite imagery into land use/cover maps is a major challenge in the field of remote sensing. This research aimed at improving the classification accuracy while also revealing uncertain areas by employing a geocomputational approach. We computed numerous land use maps by considering both image texture and band ratio information in the classification procedure. For each land use class, those classifications with the highest class-accuracy were selected and combined into class-probability maps. By selecting the land use class with highest probability for each pixel, we created a hard classification. We stored the corresponding class probabilities in a separate map, indicating the spatial uncertainty in the hard classification. By combining the uncertainty map and the hard classification we created a probability-based land use map, containing spatial estimates of the uncertainty. The technique was tested for both ASTER and Landsat 5 satellite imagery of Gorizia, Italy, and resulted in a 34% and 31% increase, respectively, in the kappa coefficient of classification accuracy. We believe that geocomputational classification methods can be used generally to improve land use and land cover classification from imagery, and to help incorporate classification uncertainty into the resultant map themes.     

基于模糊综合评定法的开发区土地集约评价

通过构建评价指标体系,确定其权重、评价因素集和评语集,并建立评价矩阵,进行模糊运算得到综合评价结果,从而验证模糊综合评定法在开发区土地集约利用评价中的有效性和准确性。     

地理国情在武汉市土地资源承载力评价中的应用

基于武汉市地理国情数据,围绕城市土地资源承载力问题,研究建立了一套城市土地资源承载力评价技术方法。首先,根据土地利用功能进行"三生用地空间"划分,将市、区有关经济统计指标按街道进行了尺度下推;其次,在分析评价适宜建设开发用地、已利用建设用地、可开发用地资源的基础上,开展了土地资源承载状态的综合评价;最后,利用地理加权回归分析方法,分析了人口、经济、交通因素对土地资源承载状态的影响。该方法将城市土地资源承载力评价由传统的人口承载力测算转换为开发建设状态评价,不仅为城市承载力评价提供了一种新的分析思路,也为制定精细化和差异化的城市建设用地资源配置和调控政策提供了科学依据。