Ni-Co sulphide segregation in the Mamb pyroxenite intrusion, Cameroon

The amphibole metapyroxenite intrusion from Mamb (Cameroon) consists of enstatite, diopside-augite, edenite, and traces of plagioclase, biotite and rutile. It contains notable amounts of sulphides (pyrrhotite, pentlandite, chalcopyrite, pyrite and Co-rich violarite). The sulphide phase segregated during magma crystallization as immiscible droplets (≤ 1 mm) included in growing ferromagnesian minerals or aggregated in the silicate crystal mush to form an interstitial phase. However, observed sulphide assemblages are likely to result from low-T (≤ 300 °C) re-equilibration of high-T monosulphide solid solutions, more particularly during the Pan-African metamorphic event. The Mamb amphibole pyroxenite intrusion is tentatively considered as a potential source for Ni and Co mineralization.     

Geochemistry and geochronology of mafic rocks from Bamenda Mountains (Cameroon): Source composition and crustal contamination along the Cameroon Volcanic Line

Mafic rocks from the Bamenda volcanic province along the Cameroon Volcanic Line have been dated from 17 to 0 Ma. Associated with some trachytes and rhyolites, this volcanism covers a period of more than 25 Ma. The studied rocks are basalts to mugearites. Most of them have been contaminated by continental crust during their transit to the surface. The oldest rocks are the most contaminated. One group of samples shows high Eu, Sr and Ba contents. This characteristic is not due to crustal contamination process, but has a mantle source origin. We argue that these characteristics have been acquired by mixing of melts formed by partial melting of mantle pyroxenites with melts formed in mantle peridotites. Such pyroxenites have been observed as mantle xenoliths in the Adamaoua province, and their chemical and isotopic compositions are consistent with such a model.     

Sedimentology and sequence stratigraphy of Aquitanian and Burdigalian stratotypes in the Bordeaux area (southwestern France)

The historical stratotypes of the Aquitanian and Burdigalian in the Aquitaine Basin are studied here by using the tools of facies sedimentology and the concept of sequence stratigraphy. This analytical method combines recognition and sequential organization of facies, and several types of stratigraphic markers. This method allows identification of at least six depositional sequences within the Miocene of the Saucats area: the four lower ones belong to the Aquitanian, the fifth one to the whole Burdigalian, while the sixth sequence corresponds to the Serravallian. In addition, this method provides evidence of a period of emersion before each transgression, suggesting potential fluvial erosion. Nevertheless, these phases are of lower amplitude than those observed in the Rhodano-Provençal Basin.

Résumé

Les stratotypes historiques de l’Aquitanien et du Burdigalien, en Aquitaine, sont étudiés ici en termes de sédimentologie de faciès et de stratigraphie séquentielle. Cette méthode d’analyse combine la reconnaissance et l’organisation séquentielle des faciès à plusieurs types de repères stratigraphiques. Elle permet d’identifier au moins six séquences de dépôt dans le Miocène de la région de Saucats : les quatre premières dans l’Aquitanien, la cinquième pour le Burdigalien et la dernière pour le Serravallien. Elle a également permis de mettre en évidence des phases d’émersion anté-transgression, suggérant de possibles érosions fluviatiles, mais d’ampleurs inférieures à celles reconnues dans le Bassin miocène rhodano-provençal.     

A pore-throat model based on grain-size distribution to quantify gravity-dominated DNAPL instabilities in a water-saturated homogeneous porous medium

A pore-scale network model based on spherical pore bodies and cylindrical pore throats was developed to describe the displacement of water by DNAPL. The pore body size and the pore throat size were given by statistical distributions with user-specified values for the minimum, mean and maximum sizes. The numerical model was applied to a laboratory experiment conducted on a sand-filled glass column. The parameters relative to pore body size and pore throat size that were used in the construction of the equivalent network were derived from the discrete grain-size distribution of the real porous medium. The calculated arrival times of the DNAPL front were compared with those measured using optic fibre sensors placed at different points on the control section of the experimental device. Furthermore, the model simulated DNAPL pressure measured at the entrance section of the system. In general, the numerical results obtained with the model were in good agreement with the actual measurements.     

The effect of mineralogical and cationic heterogeneities on rheological properties of suspensions with Li-smectites, extracted from Volclay MX-80

The rheological study of colloidal suspensions contributes to the understanding of the aggregation phenomena of colloidal particles within a suspended fluid. The infra-2-μm (equivalent diameter) fraction of a bulk material, Volclay MX-80 bentonite was intensively analysed in order to understand the relative rheological data scattering observed with Li-smectite suspensions, prepared with the usual saturation procedure. A good mineralogical characterisation, especially for secondary minerals, coupled to a verification of cation exchanges on clayey fraction allowed us to propose a new way for investigating the observed differences of the bentonites rheological behaviour. Indeed, for a well Li-saturated smectite obtained from the purified infra-2-μm fraction, rheological data proved to be very accurate and perfectly reproducible. This emphasises the role of other minerals as well as the commonly observed discrepancy between the rheological behaviours of natural and industrial bentonites.     

Modelling the effect of temperature on unsaturated soil behaviour

A simple thermohydromechanical (THM) constitutive model for unsaturated soils is described. The effective stress concept is extended to unsaturated soils with the introduction of a capillary stress. This capillary stress is based on a microstructural model and calculated from attraction forces due to water menisci. The effect of desaturation and the thermal softening phenomenon are modelled with a minimal number of material parameters and based on existing models. THM process is qualitatively and quantitatively modelled by using experimental data and previous work to show the application of the model, including a drying path under mechanical stress with transition between saturated and unsaturated states, a heating path under constant suction and a deviatoric path with imposed suction and temperature. The results show that the present model can simulate the THM behaviour in unsaturated soils in a satisfactory way.     

Eclogite and pyroxenite xenoliths from off-craton kimberlites near the Kaapvaal Craton, South Africa

Mantle xenoliths brought to the surface by kimberlite magmas along the south-western margin of the Kaapvaal craton in South Africa can be subdivided into eclogites sensu stricto, kyanite eclogites and orthopyroxene eclogites, all containing omphacite, and garnet clinopyroxenites and garnet websterites characterised by diopside. Texturally, chemically (major elements) and thermally, we observe an evolution from garnet websterites (T_EG = 742–781 °C) towards garnet clinopyroxenites (T_EG = 715–830 °C) and to eclogites (T_EG = 707–1056 °C, mean value of 913 °C). Pressures calculated for orthopyroxene-bearing samples suggest upper mantle conditions of equilibration (P = 16–33 kb for the garnet websterites, 18 kb for a garnet clinopyroxenite and 23 kb for an opx-bearing eclogite). The overall geochemical similarity between the two groups of xenoliths (omphacite-bearing and diopside-bearing) as well as the similar trace element patterns of clinopyroxenes and garnet suggest a common origin for these rocks. Recently acquired oxygen isotope data on garnet (δ¹⁸O_gnt = 5.25–6.78 ‰ for eclogites, δ¹⁸O_gnt = 5.24–7.03 ‰ for garnet clinopyroxenites) yield values ranging from typical mantle values to other interpreted as resulting from low-temperature alteration or precursors sea-floor basalts and associated rocks. These rocks could then represent former magmatic oceanic rocks that crystallised from a same parental magma as plagioclase free diopside-bearing and plagioclase-bearing crustal rocks. During subduction, these oceanic rock protoliths equilibrated at mantle depth, with the plagioclase-bearing rocks converting to omphacite and garnet-bearing lithologies (eclogites sensu largo), whereas the plagioclase-free diopside-bearing rocks converted to diopside and garnet-bearing lithologies (garnet websterites and garnet clinopyroxenites).     

Analysis, in a free surface steady flow, of the interstitial velocity field inside a sedimentary bed

The objective of our study is to exploit ultrasonic Doppler velocimetry (UDV) to analyze the velocity field within a steady flow on a porous sedimentary bottom. Velocities are measured for several sedimentary beds, as well within the fluid vein as within the sediment. Our results highlight an exponential distribution of the velocities inside the sediment and a discontinuity of the velocity at the interface water–sediment, between the velocity in the free flow and the velocity within the sediment. These results highlight the need to base the analysis of sedimentary transport on the reality of the physical processes at the interface water–sediment.     

Holocene hydrological and vegetation changes in southern France inferred by the study of an alluvial travertine system (Saint-Guilhem-le-Désert, Hérault)

A geobotanical study of the travertine system of Saint-Guilhem-le-Désert (southern France) was carried out in order to reconstruct the local Holocene environment in a region where the postglacial vegetation history is poorly documented. The travertinisation process has started at ca. 8500 cal. BP, in a landscape dominated by Pinus sylvestris type (probably Pinus nigra sub sp. salzmannii). Around 7000 cal. BP, the travertine system recorded torrential events not evidenced at the regional scale, showing the particularity of the Verdus hydrological regime. More recently, ca. 5100 cal. BP, a lake or a marsh was filled within the Verdus plain, as attested to by sand and silt particles accumulated in the sequence. The present-day vegetation dominated by Quercus ilex, on south facing slopes, was most likely established between the Bronze Age and the Gallo-Roman period correlatively to the decline of Pinus nigra and deciduous Quercus, most probably under human influence.     

Late Glacial-Holocene sequence of Lake Saint-Point (Jura Mountains, France): Detrital inputs as records of climate change and anthropic impact

A sediment sequence (SP05, 12.5 m long) was taken from the deep zone of Lake Saint-Point (850 m a.s.l.). Sedimentological analyses highlight two main contrasted periods of sedimentation: the Last Glacial Maximum (LGM)/Late Glacial characterized by high silicates and quartz contents the Holocene dominated by the carbonated fraction. At the beginning of the Holocene (11 400 years cal. BP), silicates fraction flux abruptly decreased. The shift between the Late Glacial and the Holocene periods may be explained by forest development in the catchment. From 10 200 to 6800 years cal. BP, silicates and detrital carbonate fractions remained stable before they progressively increased steady till 5000 years cal. BP. Both increases cannot be totally attributed to an anthropic impact since pollen data indicate continuous anthropic activities only dated back from 3000 years cal. BP. They thus resulted from a dominant climatic control. From 5000 years cal. BP, silicates content still increased while detrital carbonates input became steady due to a change in pedogenetic processes affecting the catchment. During the last millennium, silicates and detrital carbonate decreased, probably due to pastureland development.     

Influence of suction cycles on the soil fabric of compacted swelling soil

The soil fabric plays an important role in complex hydromechanical behaviour of the expansive soils. This article addresses the influence of the wetting and drying paths on the soil fabric of compacted bentonite and silt mixtures at two different initial dry densities corresponding to loose and dense states. To obtain the hydric response of the soil, two suction imposition techniques were used: osmotic technique for the suction range less than 8.5 MPa and the vapour equilibrium or the salt solution technique for the suction range between 8.5 and 287.9 MPa. Additionally, the soil fabric analysis was performed using mercury intrusion porosimetry (MIP) and nitrogen gas adsorption (BET) techniques. The dense samples produced cumulative swelling strains during the suction cycles, while shrinkage was observed for the loose samples. The suction cycles induced an equilibrium state indicative of the elastic behaviour of the samples. The soil fabric analysis showed that regardless of the soil's initial state (loose or dense), the samples obtained the same soil fabric at the equilibrium state. The experimental results illustrated also the existence of an elastic void ratio (e_0el) where the compacted soils at this state present an elastic hydric behaviour during the successive suction cycles.     

Série du marégraphe de Marseille : mesures de températures de surface de la mer de 1895 à 1956 : une correction

In 2007, a daily temperature series, which has been collected from 1885 to 1967 at the Marseilles tide recorder, was published here. Upon the available information provided by the data managing office, they were considered as sea-surface temperatures. Unfortunately they were not but air temperature inside the building. In the present paper, the authors correct this error by studying the true seawater temperature series which had been dug out after the publication of the precedent paper. The study of this slightly shorter series (1895–1956) leads to close conclusions. Along these 61 years, the warming trend of the surface seawater rises to +1.6 °C, to +1.3 °C if only January to May and December are selected and +2.2 °C during the June to November period. In the first half part of the series (1895–1925), the average value of each month distributions (except January) and annual minimal (except 1956) are significantly lower than along the second (1925–1956).     

The Alleret maar (Massif Central, France): A new lacustrine sequence of the early Middle Pleistocene in western Europe

The Alleret maar (Massif Central, France) provides a long lacustrine sequence (40.6 m) attributed to the early Middle Pleistocene. Sediment, pollen and diatoms analysis of its upper part (AL2 core, 14.6 m) indicates two temperate phases marked by high lake levels, forest development and vegetation expansion. They are separated by a cold period during which lake level drops, coarse sediment input increases and steppic and xerophilous plants develop. Pollen data suggests that this sequence belongs to the upper part of the Cromerian complex. These results are in agreement with the 557 ± 3 ka (±12 ka, including all errors) ⁴⁰Ar/³⁹Ar age obtained from an interbedded tephra layer emitted by the Mont-Dore/Sancy strato-volcano and establish that this sequence probably covers the MIS 15 substages.     

A spectrophotometric measurement of soil cation exchange capacity based on cobaltihexamine chloride absorbance

Among numerous methods for cation exchange capacity (CEC) determination for soils and sediments, the cobaltihexamine chloride method is frequently used due to its ability to measure CEC at soil pH. After exchange with Co(NH₃)₆³⁺ ions, CEC is estimated via the measurement of the Co remaining in solution. The modified method proposed allows a more rapid determination of CEC based on the measurement of the absorbance at 472 nm of the cobaltihexamine chloride solution before and after exchange. This method has been applied to various soil's horizons from four sites, selected to cover a wide range of CEC and pH values. The model obtained allows one to calculate CEC from absorbance at 472 nm with 95% confidence intervals. As CEC is of relevant meaning in agronomical and environmental purposes, and more recently in ecotoxicological studies, this modified method can be proposed as a rapid test for CEC evaluation.     

Organic contamination identification in sediments from a Mediterranean coastal ecosystem: The case of the Nador lagoon (Eastern Morocco)

The Nador lagoon ecosystem (North-East of Morocco) displays a major socioeconomic interest. In fact, it is essential to evaluate consequences of anthropogenic activities in the lagoon especially by organic matter studies (nature and distribution) in the sedimentary compartment. Surface sediments show variable rates in total organic carbon and in sulfur, high in some cases (7.5 and 1.8% respectively). These high contents are recorded in the center of the lagoon. Their distributions are controlled by the hydrodynamism and the anthropogenic degree. The molecular biomarkers analyses and especially n-alkanes distribution reveal: a zone of marine influence; and a zone of continental influence. The occurrence of pentacyclic triterpanes with a typical distribution of a thermally mature organic matter reveals a contamination due to petroleum products in the entire lagoon except for the center. Coprostanol occurrence near cities indicates wastewater effluents inputs and reducing conditions underlined by high values of stanols/sterol ratios. Thus, the organic contamination (petroleum by-products and wastewater effluents) occurs in the vicinity of the cities whereas the littoral edge and center remain weakly affected by these contaminations.