基于假设检验的地震动强度(烈度)速报方法

地震发生后数分钟内,快速、可靠地判别出地震动强度(烈度)的空间分布,用以估计不同地区的受灾程度,可以为政府开展应急救援并合理分配救援力量提供决策依据,保证救援人员及时、准确地到达极震区并展开搜救,以减少生命财产损失。本文基于统计学中的假设检验方法,对历史震害资料进行统计,提出了一种利用强地震动参数判别地震动强度(烈度)的方法。比较结果表明,本方法所确定的地震动强度(烈度)与实际震害烈度对应较好,能较真实地反映实际震害情况。     

随机地震动场多点激励下大跨度桥梁地震反应分析方法

地震输入问题一直是工程结构抗震研究关注的焦点。对大跨度桥梁结构，考虑随机地震动场的多点激励而进行地震反应分析较为合理。本文结合大跨度桥梁抗震设计，系统地介绍了随机地震动场的模型以及随机地震动场多点激励下大跨度桥梁地震反应分析的方法。     

基于小田原试验场地数据的不同基岩输入模型对预测地震动特征的影响研究

随着强震台网的密布及观测记录的增加,为研究各类局部场地地震反应预测模型的合理性提供了有效的参考依据,也使利用强震记录及场地条件研究地震动特征成为可能。选取场地地质参数资料和地震记录数据齐全的日本小田原（Ashigara Valley）盲测试验场地,通过对比不同地震动输入方式及场地反应分析模型,研究地震动特征,分析现有模型的优劣。基于1990年8月5日M5.1强震事件的地表基岩记录和地下基岩地震记录,采用地下台强震记录直接输入、地表基岩台强震记录减半为基底地震动输入、地表基岩台强震记录反演为基底地震动输入作为3种基岩地震动输入。基于局部场地条件分别建立一维等效线性模型、二维黏弹性模型及二维时域等效线性化模型等工程中常用的场地数值分析模型,进行局部场地地震反应分析,预测该盲测场地的地表地震动特征,并与对应的实测强震记录结果进行对比,分析不同基岩地震动输入方式对预测地震动特征及地表土层反应谱特征的影响,重点分析地震动输入、土体非线性、场地横向不均匀性及几何与非线性特征共同作用等因素对地表地震动特征的影响,以期为地表地震动的合理预测提供参考。     

随机有限断层法合成地震动的研究与应用

目前很多研究者采用随机有限断层模型预测地震动并被证明是可行的.本文运用随机有限断层地震动叠加合成方法,模拟了1988年肃南5.7级地震,与实际记录进行对比分析,发现：用有限断层方法模拟得到的峰值加速度以及峰值加速度出现所对应的特征时刻与真实记录较为吻合;比较模拟的地震动反应谱和实际记录的加速度反应谱,总体上在工程感兴趣的频段内,有限断层方法拟合的结果基本能满足实际工作的需要.为进一步开拓该方法在工程应用中的前景,以兰州市柴家峡水电站为例,将此理论方法应用于缺乏强震记录地区的近场地震动估计中,模拟分析了马衔山北缘活动断裂发震时在坝址区产生的地震动特征,其近场合成结果与1125年兰州7.0级地震的烈度分布符合较好,可供工程抗震设计参考使用.     

2022年日本福岛7.4级地震震害分析与对比

2022年3月16日在日本福岛县东部海域发生7.4级地震,本文基于近实时震害评估系统RED-ACT对此次地震进行了快速评估,包括强震动记录分析、区域地震破坏力震害评估结果和典型桥梁破坏,并结合实际震害对比了该系统评估结果以及其他主要震害快速评估系统的分析结果,结果表明：(1)此次地震造成的地面运动强度较大,多数台站记录PGA较2021年福岛7.3级地震更强,反应谱在0.5～1.3s区间呈现远高于2021年福岛地震的趋势。(2)RED-ACT的震害评估结果相较于日本NIED-CRS系统和美国USGS-PAGER系统与实际震害更为接近,在强震动记录较为密集的地区,开展基于强震动时程和建筑非线性分析的震害评估能够得到更为准确的震害评估结果。(3)此次地震对白石市附近桥梁造成了一定的破坏,桥梁破坏附近处的强震动会对典型桥梁结构造成一定程度的破坏。     

基于GIS的抗震设计地震动查询系统

基于ArcView CIS软件开发平台，建立了设计地震动参数和最不利设计地震动数据库，建成了基于性态设计和考虑最不利设计地震动因素的设计地震动查询系统，该系统主要为基于PC机工作的结构抗震设计人员提供相应的设计地震动参数和最不利设计地震动的设计地震动信息查询服务。     

基于汶川地震远场强震动记录的厚覆盖土层对长周期地震动影响分析

利用2008年5月12日汶川8．0级地震的远场强震动记录,研究太原盆地厚覆盖土层对长周期地震动的影响,并将其结果与地震安全性评价工作中的土层反应分析结果进行比较。结果表明：厚覆盖土层对长周期地震动有很强的放大作用,覆盖层厚度越厚,峰值出现的周期越大,而相对于基岩最大放大可达9倍左右。另外,对于厚覆盖层的场地,观测结果与场地地震安全性评价计算结果在一定的长周期范围内差别相当大,相对于基岩,观测结果的放大系数至少高于场地地震安全性评价计算结果的2倍以上,最大达到近9倍。     

最不利设计地震动研究

实际记录到的真实地震动在工程结构的抗震研究、分析和设计中往往作为一种施加到结构上使结构振动，直至破坏的地震荷载．如何合理选择真实的地震动记录作为研究结构地震反应的输入，一直是国内外抗震研究和设计中引人关注的重要问题．本文首先提出了最不利设计地震动的概念；然后在收集到的国内外5000余条被认为有重要意义的地震动记录基础上，利用综合估计地震动潜在破坏势的方法，对４种场地类型分别给出了长周期、短周期和中周期结构的国内外最不利设计地震动；最后通过几类不同结构的地震反应分析，初步验证了本文所确定的最不利设计地震动的可靠性和合理性．      

Study on the severest real ground motion for seismic design and analysis

How to select the adequate real strong earthquake ground motion for seismic analysis and design of trucures is an essential problem in earthquake engineering research and practice.In the paper the concept of the severest design ground motion is proposed and a method is developed for comparing the severity of the recorded strong ground motions.By using this method the severest earthquake ground motions are selected out as seismic inputs to the structures to be designed from a database that consists of more than five thousand significant strong ground moton records collected over the world.The selected severest ground motions are very likely to be able to drive the structures to their critical response and thereby result in the highest damage potential.It is noted that for different structures with diffferent predominant natural periods and at different sites where structures are located the severest design ground motions are usually different.Finally.two examples are illustrated to demonstrate the rationality of the concept and the reliability of the selected design motion.     

成都盆地不同工程地质分区内场地地震动参数的计算分析

场地条件对地震动幅值和频谱特性均有影响, 现行的中国地震动参数区划图根据场地类别调整地震动反应谱特征周期, 但尚未考虑到对地震动峰值和反应谱平台值的调整. 以成都盆地为例, 广泛收集了盆地范围内的工程钻孔资料. 考虑到不同工程地质分区内场地地震动参数可能存在较大差异, 在研究区工程地质分区的基础上, 利用等效线性化方法对钻孔进行了土层地震反应分析, 给出了成都盆地内不同工程地质分区的地震动参数调整系数建议值.     

保定市设计地震动参数的研究

本文根据保定市及周围地区的地震地质环境，在地震危险性分析的基础上，采用等效线性一维波动方程进行土层的地震反应分析。给出50年超越概率63％、10％、2％基岩和地面的水平向峰值加速度、反应谱（场址基本烈度Ⅶ度）和地震影响系数最大值。该结果为抗震设计提供了可靠依据，具有应用价值。     

九寨沟MS7.0地震强地震动模拟及漳扎镇地震动强度预测

破坏性地震强度预测可用于工程领域抗震设防以及地震危险性分析评估,是防震减灾中一项很重要的基础工作.为了再现九寨沟地震的地震动强度,评估缺失强震记录的九寨章扎台站的地震动强度,本文用经验格林函数法对九寨沟地震进行了数值模拟.选取了震源周边地震动峰值加速度超过10 Gal的10个强震台站进行模拟.因未得到九寨沟地震的余震,初次尝试将汶川地震和定西地震的余震作为格林函数模拟九寨沟地震.模拟结果整体上可以反映各台站地震动的强度特征,尤其是地震动高频成份拟合较好.模拟值的地震动峰值加速度、时程数据、反应谱等与观测值拟合较好.预测结果显示漳扎镇的地震动峰值加速度值约为180~200 Gal.预测结果也表明在缺少大震的余震记录时,经验格林函数法使用其他大震的余震同样可以再现目标地震的强度特征.本研究也为经验格林函数方法在缺乏小震记录地区的使用积累了经验.最后总结了格林函数的选取标准,为经验格林函数方法来预测未来强震动特征积累了经验.

     

2010年墨西哥Baja MW7.2地震与中国玉树MW6.9地震强地震动特征的对比研究

2010年4月4日墨西哥Baja地区发生MW7.2地震,2人遇难; 同年4月14日中国青海省南部玉树地区发生MW6.9地震,截至2010年4月25日,已造成2 220人遇难．有报道指出,玉树地震矩震级小于Baja地震,人员伤亡却远大于后者,主要原因在于玉树地区抗震设防标准低、建筑物抗震性能差．地震造成破坏程度的大小并非仅仅取决于矩震级的大小,而同时与其释放的地震波辐射能及发震后造成的强地面运动的大小有关. 玉树地震释放的地震波辐射能约相当于Baja地震的10倍,目前玉树地震尚无实测的强震记录．针对玉树地震和Baja地震建立动态复合震源模型,分别模拟基岩上及浅层速度结构（V30,地下30 m平均剪切波速）下近断层区域的强地面运动．结果表明,基岩上及V30下玉树地震近断层区域强地面运动整体约相当于Baja地震的2倍．因此,玉树地震造成发震区域内建筑物损毁程度及人员伤亡情况均严重于Baja地震,重要原因之一在于其地震波辐射能大,且强地面运动较强．本文中所应用的动态复合震源模型,在地震矩守恒和地震波辐射能守恒的条件约束下,可以作为地震发生后补充强地面运动数据的有效手段之一。     

不同抗震标准下的海洋石油平台设计地震动参数研究

在海洋石油平台抗震标准方面,中国与美国规范之间存在一定的差异。本文首先介绍了两国抗震规范中的相关内容。以渤海某油田为例,根据渤海及邻区的地震构造、地震活动环境及地震动衰减关系,利用概率方法进行地震危险性分析;采用一维等效线性化方法,根据场地土动力性能试验资料,确定不同抗震标准下的设计地震动参数。最后分析不同抗震标准下的地震动参数关系,以及对工程设计的影响。结合我国渤海与美国南加利福尼亚地区的地震活动性对比分析,对我国海洋石油平台的设防地震水准提出建议。     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

Generation of hazard-consistent ground motion

This paper presents an integrated approach for evaluating seismic hazard and establishing ground motion at a site. In this approach, we combine the advantage of probabilistic and deterministic seismic hazard analyses and generate synthetic ground motion by considering the characteristics of seismic source, path attenuation, and local soil condition. Furthermore, uncertainties in seismic and soil parameters are taken into account. The proposed approach can be used to establish site-specific ground motion for engineering applications.     

Response spectral relationships for rock sites derived from the component attenuation model

The seismological model was developed initially from the fundamental relationship between earthquake ground motion properties and the seismic moment generated at the source of the earthquake. Following two decades of continuous seismological research in the United States, seismological models which realistically account for both the source and path effects on the seismic shear waves have been developed and their accuracy rigorously verified (particularly in the long and medium period ranges). An important finding from the seismological research by Atkinson and Boore and their co‐investigators is the similarity of the average frequency characteristics of seismic waves generated at the source between the seemingly very different seismic environments of Eastern and Western North America (ENA and WNA, respectively). A generic definition of the average source properties of earthquakes has therefore been postulated, referred to herein as the generic source model. Further, the generic ‘hard rock’ crustal model which is characteristic of ENA and the generic ‘rock’ crustal model characteristic of WNA have been developed to combine with the generic source model, hence enabling simulations to be made of the important path‐related modifications to ground motions arising from different types of crustal rock materials. It has been found that the anelastic contribution to whole path attenuation is consistent between the ENA and WNA models, for earthquake ground motions (response spectral velocities and displacements) in the near and medium fields, indicating that differences in the ENA and WNA motions arise principally from the other forms of path‐related modifications, namely the mid‐crust amplification and the combined effect of the upper‐crust amplification and attenuation, both of which are significant only for the generic WNA ‘rock’ earthquake ground motions. This paper aims to demonstrate the effective utilization of the latest seismological model, comprising the generic source and crustal models, to develop a response spectral attenuation model for direct engineering applications. The developed attenuation model also comprises a source factor and several crustal (wave‐path modification) component factors, and thus has also been termed herein the component attenuation model (CAM). Generic attenuation relationships in CAM, which embrace both ENA and WNA conditions, have been developed using stochastic simulations. The crustal classification of a region outside North America can be based upon regional seismological and geological information. CAM is particularly useful for areas where local strong motion data are lacking for satisfactory empirical modelling. In the companion paper entitled ‘response spectrum modelling for rock sites in low and moderate seismicity regions combining velocity, displacement and acceleration predictions’, the CAM procedure has been incorporated into a response spectrum model which can be used to effectively define the seismic hazard of bedrock sites in low and moderate seismicity regions. This paper and the companion paper constitute the basis of a long‐term objective of the authors, to develop and effectively utilize the seismological model for engineering applications worldwide.     

Some considerations on the physical mea-sure of seismic intensity

Introduction In1564,an Italian man named Jacopo Gastaldi(XIE,1958)presented the first macroseismic intensity scale in the world,which based on the building damage and the ground surface failure after an earthquake.Today the seismic intensity has developed into an indispensable important concept,which applies to seismology and earthquake engineering,however it was just used to de-scribe earthquake damage while the concept of intensity was established.With this concept,seis-mologist can estima…     

一种利用单台强震记录计算任意场地三分量地面运动的方法

本文利用近场理论格林函数反褶积的方法计算土层的地震反应.解答中包含了产生地面运动的各种反射、透射和转换波震相,也计入了土层与基底介质的相互作用.将计算的土层响应与已获得的近场加速度记录褶积,可算出不同土层场地上垂直向和水平向三分量的地面运动.文中利用1982年卢龙地震的近场加速度记录,检验了方法的可行性.     

估计和比较地震动潜在破坏势的综合评述

如何估计和比较地震动对结构的破坏作用，一直是国内外抗震研究中的一个至关重要的问题。本主要篇幅用于介绍这一领域迄今所取得的成果并作了简单的评述，并在此基础上，提出了一种可用来比较地震动潜在破坏势的综合评估法，提出该方法的目的并不在意去确定什么量更能代表地震动在潜在破坏势，而只是在考察现有的各种被认为能代表地震动的潜在破坏势的各种参数基础上，考虑采用什么方法才能更合理地判定和比较地震动的破坏势，为此本将通常作为地震动潜在破坏势的地震动参数分成两类：一类为直接由地震动本身得到的参数，另一类为地震动通过结构反应得到的参数，并分别对此进行了讨论和分析，在此基础上得出了一种在目前可认为是研究地震动潜在破坏势押送为合理的方法-地震动潜在破坏势综合评价法。