Coronas in olivine gabbros and iron ores from Susimäki and Riuttamaa,Finland

Coronas have been studied by petrographie and microprobe techniques in metamorphosed olivine gabbros and associated iron ores from Susimäki and Riuttamaa in Southwest Finland. Three types of coronas are distinguished occurring between the following primary minerals: (1) olivine-plagioclase, (2) opaque oxides-plagioclase, (3) opaque oxides-clinopy-roxene. Secondary corona minerals are, in order of decreasing abundance, hornblende, orthopyroxene, spinel, olivine, ilmenite, and magnetite. This is the first reported occurrence of coexisting primary and secondary olivines in coronas. Quantitative approximations of the corona-producing reactions are given by chemical equations of the analyzed reactant and product mineral phases. Individual coronas of all three types developed essentially as allochemical systems open to mass transfer by an intergranular fluid phase. The overall corona formation within the volume of a handspecimen likely involved only a net gain of water and a loss of Na.     

The ultra‐high pressure coronitic and pseudomorphous reactions in a metagranodiorite from the Brossasco‐Isasca Unit,Dora‐Maira Massif,western Italian Alps: a petrographic study and equilibrium thermodynamic modelling

Metagranodiorite samples from the Brossasco‐Isasca Unit, Dora‐Maira Massif, western Alps, show pseudomorphous and coronitic textures where igneous minerals were partially replaced by ultra‐high pressure (UHP) metamorphic assemblages. The original magmatic paragenesis consisted of quartz, plagioclase, K‐feldspar, biotite and minor phases. During UHP metamorphism, the plagioclase (site P) was replaced by zoisite, jadeite, quartz, K‐feldspar and kyanite, and coronitic reactions developed between biotite and adjacent minerals. At the original igneous biotite–quartz contact (site A), a single corona of poorly zoned garnet is developed, whereas at the biotite–K‐feldspar (site B) and biotite–plagioclase (site C) contacts, composite coronas are formed. Integration of results from petrographic observations, calculations of mineral stoichiometry and thermodynamic calculations of mineral stability has allowed the determination of the metamorphic reactions involved and the estimation of the metamorphic conditions, which reached as high as 24 kbar and 650 °C. Accurate microanalysis by energy‐dispersive spectroscopy (EDS) and statistical analysis of the data allowed us to identify, for the first time in a natural Na‐pyroxene of metagranitoid rocks, the end‐member Ca‐Eskola.     

Mineral Corona Formation During High-P Retrogression of Granulitic Rocks, Ungava Orogen, Canada

Crystalline basement exposed in tectonic windows within theUngava Orogen records a polycyclic Archean granulite-faciesto Paleoproterozoic amphibolite-facies history. Amphibolite-faciesassemblages comprise garnet coronas around plagioclase, clinopyroxeneor cummingtonite coronas on orthopyroxene, hornblende coronason clinopyroxeneorthopyroxene, sodic rims on calcic plagioclase,and/or titanite coronas on ilmenite. Petrographic observationsand model reactions suggest that growth of coronitic garnetis closely associated with amphibolitization of twopyroxenegneisses. Calcic plagioclase constitutes a key reactant in allgarnet-producing reactions and possibly acted as a rate-controllingphase. Multi-equilibrium thermobarometric calculations showgood convergence of possible equilibria in the amphibolite-faciesrocks, indicating that coronitic textures need not imply completechemical disequilibrium. P—T determinations for the amphibolite-faciesgneisses beneath the thrust belt of Ungava Orogen are in therange 7.7–9.8 kbar and 585–723C. These values areconsistent with prograde determinations from pelitic schistswithin the thrust belt. Estimates of water activity clusterinto two populations. High a_H2O values are obtained for highlystrained basement rocks adjacent to the thrust belt whereaslow a_H2O values are derived for orthogneiss samples which showno thrust-related fabrics and are distal to the thrust belt. KEY WORDS: corona; high-P retrogression; multi-equilibrium thermo-barometry ^*Corresponding author. Telephone: (613) 995-4935. Fax: (613) 995-9273. Internet: mstonge{at}cc2smtp.emr.ca     

Forward modeling corona growth in a partially eclogitized leucogabbro, Bourbon Island, North-East Greenland

Coronitic textures are common in partially eclogitized igneous bodies, such as gabbros, leucogabbros, and anorthosites, east of the Germania Land Deformation Zone in North-East Greenland. Coronas formed by prograde metamorphic processes that transformed the gabbroic bodies to eclogite facies, and record frozen stages of the prograde metamorphic evolution of these rocks. A metaleucogabbro-norite body on Bourbon Island in Jøkelbugt is characterized by three concentric areas: a coronitic core, a mottled inner rim with areas of completely eclogitized material surrounded by a matrix of coronitic metaleucogabbro, and an outer rim of strongly foliated and completely retrogressed amphibolite. The Bourbon body preserves four stages of the prograde metamorphic history: Stage I, Stage II, Stage III, and Eclogite Stage. Stage I coronas are found only in the core of the body, which is the least reacted part of the leucogabbro-norite and the closest to the protolith, and is characterized by the corona sequence Pl_rim/Grt + Kfs + Amp/Grt + Amp/Cpx_rim. The typical corona sequence for Stage II is Pl_rim/Grt + Pl + Zo/Cpx_rim/Amp_rim. Stage III samples show a Pl_rim + Ky + Scp/Grt + Pl + Qtz/Qtz + Pl sequence, with the relict clinopyroxene being replaced in part by microcrystalline aggregates of Cpx + Amp + Pl. The Eclogite Stage shows relict Pl completely replaced by Grt, and the relict Cpx completely replaced by aggregates of Omp + Pl + Kfs + Amp. We tested open-system grain boundary diffusion (OSGBD) theories to model the prograde Stage I symplectitic coronas. The observed ratio of the thickness of the different layers is Pl_rim:Grt + Kfs + Amp:Grt + Amp:Cpx_rim equal to 3:1.3:0.95:0.5. These ratios are very close to the modeled ones of 2.7:1.1:1:0.5. Furthermore, subtle textural changes within the Grt + Kfs + Amp corona were also reproduced by the model. The model gave us insight into the conditions of the metamorphic system in which the coronas formed. The sequence Pl_rim/Grt + Kfs + Amp/Grt + Amp/Cpx_rim formed by diffusion driven reactions in an open system involving gain of Fe, K, and Na, and loss of Ca and Mg at the original clinopyroxene–plagioclase boundary. Relative mobilities of the different components within the corona layers were L_MgMg > L_AlAl > L_SiSi > L_CaCa > L_KK > L_FeFe > L_NaNa. Fluid circulation was active to some degree during the transformation to eclogite. The differences between core, inner rim, and the two domains within the inner rim of the metaleucogabbro-norite can be explained by different degrees of fluid circulation in different portions of the rock. The presence of phases containing Cl and P, such as scapolite, in completely eclogitized samples supports the presence of fluid circulation in the system. Another possible explanation for the mottled appearance of the inner rim is protolith heterogeneity.     

Origin of biotite-hornblende-garnet coronas between oxides and plagioclase in olivine metagabbros,Adirondack region,New York

Complex multivariant reactions involving Fe-Ti oxide minerals, plagioclase and olivine have produced coronas of biotite, hornblende and garnet between ilmenite and plagioclase in Adirondack olivine metagabbros. Both the biotite (6–10% TiO₂) and the hornblende (3–6% TiO₂) are exceptionally Titanium-rich. The garnet is nearly identical in composition to the garnet in coronas around olivine in the same rocks. The coronas form in two stages:

1. Plagioclase+Fe-Ti Oxides+Olivine+water =Hornblende+Spinel+Orthopyroxene±Biotite +more-sodic Plagioclase
2. Hornblende+Orthopyroxene±Spinel+Plagioclase =Garnet+Clinopyroxene+more-sodic Plagioclase

The Orthopyroxene and part of the clinopyroxene form adjacent to olivine. Both reactions are linked by exchange of Mg²⁺ and Fe²⁺ with the reactions forming pyroxene and garnet coronas around olivine in the same rocks. The reactions occur under granulite fades metamorphic conditions, either during isobaric cooling or with increasing pressure at high temperature.     

Two contrasted P–T–time paths of coronitic metanorites of the French Massif Central: are reaction textures reliable guides to metamorphic histories?

Metanorites from two eclogitized metagabbros of the Hercynian French Massif Central preserve coronitic textures of hornblende, garnet, quartz and/or kyanite produced at the expense of the primary magmatic assemblage orthopyroxene and plagioclase. Using a petrogenetic grid in the CFMASH system, two possible P–T evolutions for the origin of the coronas are evaluated. The sequence of reactions involving the formation of Hbl (–Ky) ± Grt and Qtz coronitic assemblages is consistent with an isobaric cooling at high pressure (c. 1–2 GPa) under hydrated conditions. However, this P–T path, inferred by using only petrographical observations, is inconsistent with the geochronological constraints: emplacement of the gabbro at 490 Ma and high‐pressure metamorphism at 410 Ma. In order to reconcile petrographical observations with geochronological constraints, we propose a discontinuous two‐stage evolution involving a change in water activity with time. (1) Emplacement and cooling of the norite at low pressure under anhydrous conditions, at 490 Ma. (2) During the Hercynian orogeny, the norite experienced an increase in pressure and temperature under fluid‐present conditions. Adding water to the system implies a dramatic change in the petrogenetic grid topology, restricting the orthopyroxene–plagioclase assemblage only to high temperatures. Therefore, the breakdown of the unstable magmatic assemblage, through apparent retrograde reactions, occurred along the prograde P–T path which never crossed the equilibrium boundaries of these reactions.     

Diffusion-controlled corona reaction and overstepping of equilibrium in a garnet granulite, Yenisey Ridge, Siberia

Diffusion modelling is applied to layered garnet–pyroxene–quartz coronas, formed by a pressure-induced reaction between plagioclase and primary pyroxene in a metabasic granulite. The reconstructed reaction involves some change in composition of reactant minerals. The distribution of minerals between layers is satisfactorily explained by diffusion-controlled reaction with local equilibrium, in which the diffusion coefficient for Al was smaller than those for Fe, Mg and Ca by a factor of approximately four. Diffusion of Mg towards plagioclase implies a chemical-potential gradient for MgO component in a direction opposite to the changing Mg content of garnet; this is explained by the influence of Al₂O₃ on the chemical potential of the pyrope end-member. Grain-boundary diffusion is suggested to have operated, possibly with composition gradients different from those in the bulk minerals. Chemical-potential differences across the corona are estimated from the variation in garnet composition, enabling affinity (the free energy change driving the reaction) to be estimated as 6.9±1.8  kJ per 24-oxygen mole of garnet produced. This implies that the pressure for equilibrium among the minerals was overstepped by 1.4±0.4  kbar. The probable P–T conditions of reaction were in the range 650–790  °C, 8–10  kbar. Assuming a timescale of reaction between 10⁶ and 10⁸ years, estimated diffusion coefficients for Fe, Mg and Ca are in the range 9×10⁻²³ to 5×10⁻²⁰ m² s⁻¹. These are consistent with experimental values in the literature for solid-state diffusion, including grain-boundary diffusion.     

Baddeleyite-zircon relationships in coronitic metagabbro,Grenville Province,Ontario: implications for geochronology

In the high grade gneiss terranes of the Grenville Province in Ontario, metagabbro with silicate coronas around primary olivine and Fe-Ti oxide contains trace amounts of both baddeleyite and zircon. Single baddeleyite crystals with radiating columnar coronas of polycrystalline zircon, in places with outer rims of garnet, are analogous to the coronas around olivine and ilmenite. Single crystals of zircon and baddeleyite without zircon coronas also occur in the same rocks. Both zirconium minerals have been isotopically dated at three widely separated localities. In each case baddeleyite records an igneous crystallization age of ca.1170 Ma, 125 Ma older than the ca.1045 Ma age of the zircons, interpreted to be the age of metamorphism. These data agree well with U-Pb ages obtained from other rocks in the same region and refute the alternative interpretation that silicate coronas in these metagabbros formed during cooling following magmatic crystallization. The age does not support direct correlation with diabase dykes of either the Sudbury or Abitibi swarms northwest of the Grenville Front.     

Transformation of Fe–Ti gabbro to coronite, eclogite and amphibolite in the Baie du Nord segment, Manicouagan Imbricate Zone, eastern Grenville Province

Fe–Ti gabbros from the Baie du Nord Segment of the Manicouagan Imbricate Zone, metamorphosed under high P–T conditions during the Grenvillian orogeny, have been the focus of a detailed micropetrological study. Textures and mineral chemistry suggest that the mineral assemblages represent progressive stages of metamorphic transformation resulting in the formation of coronas, pseudomorphs after igneous phases (transitional) and true, granoblastic eclogites. The transitional and eclogitic samples also have coronas which are developed locally around igneous xenocrysts of plagioclase and olivine. The deformed margins of coronitic Fe–Ti gabbros are transformed to amphibolite and contain clinopyroxene-bearing leucosomes with garnet poikiloblasts that are indicative of high-P–T dehydration melting. Interpretation of garnet zoning and thermobarometry suggest that the highest P–T conditions are recorded by coronas around xenocrysts (c. 720–800 °C at 14–17 kbar) and garnet–clinopyroxene cores in granoblastic assemblages (c. 740–820 °C at 13–17 kbar) in the eclogitic samples. Re-equilibration during the early stages of exhumation at high-T conditions (>700 °C) affected all samples, and is evidenced by the widespread development of pargasite-bearing plagioclase collars in the coronitic and transitional metagabbros and by widespread re-equilibration of the eclogites giving lower P–T estimates at grain boundaries. However, the difference in calculated pressure conditions between coronite and eclogite samples is consistent with increasing pressure (depth) from the coronites (11–13 kbar) to the eclogites (13–17 kbar). The P–T conditions recorded by these rocks define a metamorphic field gradient which suggests high heat flow through the lower crust during the Grenvillian orogeny.     

The origin of olivine-plagioclase coronas in metagabbros from the Adirondack Mountains, New York

Olivine-plagioclase coronas in metagabbros from the Adirondack Mountains, New York (USA) are spatially well-organized reaction textures consisting most commonly of sequential layers of orthopyroxene, clinopyroxene, plagioclase, and garnet; the textures are characteristic of diffusion-controlled reaction kinetics. Although similar coronas have been interpreted by previous workers in terms of an isochemical steady-state diffusion model, petrographical relations and material-balance calculations establish that coronas in the Adirondack metagabbros cannot be treated as isochemical and do not form in a single-stage steady-state process; instead they evolve through time in a complex open-system reaction. In this study, the isochemical diffusion model is modified to account for elemental fluxes across the outer boundaries of the coronal reaction band, thereby approximating the open-system behaviour of the coronas. The sequence and relative proportions of product minerals calculated by the open-system steady-state model correspond closely to those observed in coronas of the Adirondacks, over a wide range of values for the relative diffusivities of chemical components involved in the reaction, regardless of the particular method used to determine material balance in the reaction texture. Despite this correspondence, petrographical evidence for successive replacement of coronal product layers reveals that the Adirondack coronas evolved through one or more transient states, rather than forming in a single-stage steady-state process. There is no evidence that the successive replacement of coronal product layers resulted from changes in pressure or temperature, but there is petrographical evidence that these changes resulted from modification of the composition of reactant plagioclase as the corona-forming reaction proceeded. This is confirmed by the fact that the evolution of the coronas over time can be replicated with the open-system diffusion model by simulating the effect of the gradual exhaustion of plagioclase as a source of the Ca and Si components required for reaction. These simulations suggest that successive stages in the evolution of the coronas are characterized by these product sequences: (i) orthopyroxene-clinopyroxene-plagioclase-garnet; (ii) orthopyroxene-clinopyroxene-garnet; and (iii) orthopyroxene-garnet. All of these stages, and the transitions between them, are observed petrographically. Coronas in Adirondack metagabbros appear, therefore, to have originated in a complex, open-system, diffusion-controlled reaction in which the product assemblages changed as the reaction progressed.     

Experimental modelling of corona textures

Formation of corona textures along olivine–plagioclase and orthopyroxene–plagioclase interfaces has been experimentally reproduced at 670 and 700 °C and 5 kbar with either a pure H₂O fluid phase or 0.1 and 37 m NaCl–H₂O solution fluid. In these experiments, we investigate the interaction of primary olivine and/or orthopyroxene and plagioclase in powders and polished crystals, and in small samples of a natural gabbro. The experiments result in the formation of corona textures with several layers of different assemblages (according to the experimental conditions) consisting of garnet (grossular), clinopyroxene, orthopyroxene, amphibole, chlorite and phlogopite. The experiments show major differences in the number of layers, the mineral assemblages and mineral composition, and in the trends of composition of plagioclase in coronas around olivine and orthopyroxene. The fluid phase composition influences the corona assemblages and the composition of the minerals in the experimental coronas; for example, garnet appears in the coronas in the second experiment where the NaCl–H₂O ratio is low. Experimental modelling of corona textures confirms a model of simultaneous growth of layers by the mechanism of diffusion metasomatism with participation of a fluid phase through which mass is transferred. Zoning in the experimental coronas shows opposing diffusion of Al and Ca from plagioclase and Mg and Fe from olivine/orthopyroxene; difference in the mobility of the components is inferred from observations in the coronas. The experimental corona textures are compared with natural coronas from the Belomorian belt (Baltic shield), developed at 670–690 °C and 7–8 kbar, and the Marun‐Keu complex (Polar Urals), developed at 670–700 °C and 14–16 kbar, where the corona textures correspond to a transitional stage of the gabbro‐to‐eclogite transformation.     

苏鲁造山带东部荣成榴辉岩中蓝晶石及绿辉石的分解——一种可能的新成因解释

在麻粒岩相条件下，荣成含蓝晶石榴辉岩发生退变质，其中的绿辉石退变质成透辉石＋中长石组成的后成合晶，蓝晶石大部分被冠状体取代，基于详细探针分析结果的成分迁移估算显示，冠状体的形成需要从绿辉石的分解中获取CaO,MgO,FeO，绿辉石的分解包含两个反应：一个为绿辉石中的硬玉分子与石英结合形成钠长石；另一个发生在绿辉石内部各端员组分之间，后者不但形成后成合晶，而且为蓝晶石周围冠状体的形成提供CaO,MgO,FeO，蓝晶石的分解未能给后成合晶的形成提供SiO2，绿辉石与蓝晶石在分解时并冰形成一个封闭体系，它们均从周围环境中获取SiO2。     

Occurrence and chemical composition of amphiboles and related minerals in corundum-bearing mafic rock from the Horoman Peridotite Complex, Japan

A corundum-bearing mafic rock in the Horoman Peridotite Complex, Japan, was derived from upper mantle conditions to lower crustal conditions with surrounding peridotites. The amphiboles found in the rock are classified into 3 types: (1) as interstitial and/or poikilitic grains (Green amphibole), (2) as a constituent mineral of symplectitic mineral aggregates with aluminous spinel at grain boundary between olivine and plagioclase (Symplectite amphibole) and (3) as film-shaped thin grains, usually less than 10 μm in width, at grain boundary between olivine and clinopyroxene (Film-shaped amphibole). The Film-shaped amphibole is rarely associated with orthopyroxene extremely low in Al₂O₃, Cr₂O₃ and CaO (Low-Al OPX). These minerals were formed by infiltration of SiO₂- and volatile-rich fluids along grain boundaries after the rock was recrystallized at olivine-plagioclase stability conditions, i.e. the late stage of the exhumation of the Horoman Complex.

Chondrite-normalized rare earth element patterns and primitive mantle-normalized trace-element patterns of the Green amphibole and clinopyroxene are characterized by LREE-depleted patterns with Eu positive and negative anomalies of Zr and Hf. These geochemical characteristics of the constituent minerals were inherited from original whole-rock compositions through a reaction involving both pre-existing clinopyroxene and plagioclase. We propose that the fluids were originally rich in a SiO₂ component but depleted in trace-elements. Dehydration of the surrounding metamorphic rocks in the Hidaka metamorphic belt, probably related to intrusion of hot peridotite body into the Hidaka crust, is a plausible origin for the fluids.     

On the origin of multi‐layer coronas between olivine and plagioclase at the gabbro–granulite transition,Valle Fértil–La Huerta Ranges,San Juan Province,Argentina

Troctolitic gabbros from Valle Fértil and La Huerta Ranges, San Juan Province, NW‐Argentina exhibit multi‐layer corona textures between cumulus olivine and plagioclase. The corona mineral sequence, which varies in the total thickness from 0.5 to 1 mm, comprises either an anhydrous corona type I with olivine|orthopyroxene|clinopyroxene+spinel symplectite|plagioclase or a hydrous corona type II with olivine|orthopyroxene|amphibole|amphibole+spinel symplectite|plagioclase. The anhydrous corona type I formed by metamorphic replacement of primary olivine and plagioclase, in the absence of any fluid/melt phase at <840 °C. Diffusion controlled metamorphic solid‐state replacement is mainly governed by the chemical potential gradients at the interface of reactant olivine and plagioclase and orthopyroxene and plagioclase. Thus, the thermodynamic incompatibility of the reactant minerals at the gabbro–granulite transition and the phase equilibria of the coronitic assemblage during subsequent cooling were modelled using quantitative μMgO–μCaO phase diagrams. Mineral reaction textures of the anhydrous corona type I indicate an inward migration of orthopyroxene on the expense of olivine, while clinopyroxene+spinel symplectite grows outward to replace plagioclase. Mineral textures of the hydrous corona type II indicate the presence of an interstitial liquid trapped between cumulus olivine and plagioclase that reacts with olivine to produce a rim of peritectic orthopyroxene around olivine. Two amphibole types are distinguished: an inclusion free, brownish amphibole I is enriched in trace elements and REEs relative to green amphibole II. Amphibole I evolves from an intercumulus liquid between peritectic orthopyroxene and plagioclase. Discrete layers of green amphibole II occur as inclusion‐free rims and amphibole II+spinel symplectites. Mineral textures and geochemical patterns indicate a metamorphic origin for amphibole II, where orthopyroxene was replaced to form an inner inclusion‐free amphibole II layer, while clinopyroxene and plagioclase were replaced to form an outer amphibole+spinel symplectite layer, at <770 °C. Calculation of the possible net reactions by considering NCKFMASH components indicates that the layer bulk composition cannot be modelled as a ‘closed’ system although in all cases the gain and loss of elements within the multi‐layer coronas (except H₂O, Na₂O) is very small and the main uncertainties may arise from slight chemical zoning of the respective minerals. Local oxidizing conditions led to the formation of orthopyroxene+magnetite symplectite enveloping and/or replacing olivine. The sequence of corona reaction textures indicates a counter clockwise P–T path at the gabbro–granulite transition at 5–6.5 kbar and temperatures below 900 °C.     

Magmatic versus metamorphic origin of olivine-plagioclase coronas

An SEM, REE, and mineral Sm-Nd isotope study on olivine-plagioclase coronas in the Vestre Dale gabbro, Norway, was carried out in order to solve the temporal relationships within these coronas. It is demonstrated that in contrast to common models, corona formation is a multistage, late-magmatic process, starting with the formation of orthopyroxene by (partial) dissolution of olivine, followed by the nucleation and rapid outward growth of orthopyroxene+spinel symplectites at its outer margin, and concluded by replacement of this precursory outer shell by calcic amphibole. Isotopic equilibrium between inner shell orthopyroxene and the magmatic assemblage, and the REE contents of orthopyroxene and outer shell amphibole also provide strong arguments for a magmatic origin, with the local availability of fractionated magma acting as a limiting factor. The absence of replacement of intercumulus clinopyroxene by amphibole also favours a late stage magmatic rather than a metamorphic origin for corona amphibole.     

Amphibole evolution in Variscan eclogite-amphibolites from the Savona crystalline massif (Western Ligurian Alps, Italy): Controls on the decompressional P-T-t path

The Variscan metamorphic evolution of eclogite-amphibolites from the Savona Crystalline Massif is marked by the occurence of calcic amphiboles. Microtextural relations together with coupled electron microprobe and X-ray investigations on amphiboles pointed out a complex decompressional evolution.

A prograde stage of the evolution in the eclogite facies (temperature conditions estimated as ca. 620°C) is recorded by compositional zoning and inclusions in garnet. The eclogitic event (pressure conditions 12kbar) produced assemblages of garnet, omphacite, Ca-amphibole, zoisite, quartz and rutile. Composition and zoning of matrix eclogitic amphiboles reveal that the subsequent evolution in the eclogite facies contemplates a late re-equilibration under lower conditions of temperature (ca. 540°C) and pressure. The eclogitic amphiboles are pargasitic to edenitic hornblendes, and are marked by rather high Na contents at the M4 site (up to 0.5 apfu).

The forming of coarse-grained diopside-plagioclase symplectites and of amphibole-plagioclase coronas represent the early results of the destabilization of omphacites and garnets in the amphibolite facies. Pressure conditions of this stage have been estimated of ca. 10 kbar, while temperature conditions are poorly constrained. However, the increase in edenite (NaAlSi₋₁) at the outermost rims of the matrix eclogitic amphiboles and the very high values of edenite and tschermack (Al₂Mg₋₁Si₋₁) components in the coronitic amphiboles (subsilicic pargasites) suggest that temperature increase accompanied the early decompression to the amphibolite facies.

Subsequent retrogression in the low-grade amphibolite facies resulted in the complete breakdown of omphacite, producing finer-grained symplectites. This stage is also recorded by the amphibole growth (magnesio-hornblendes to edenitic hornblendes with negligible Na amounts at the M4 site) at the expense of the clinopyroxene symplectites and as outward rims around the coronitic amphiboles.

Frequently, amphibolites are completely recrystallized and do not retain any relic of high pressure assemblages. Temperature conditions for this late amphibolitic event have been estimated of ca. 510°C, while pressure conditions are inferred in the range 4–7 kbar.

Such a complicated decompressional evolution is indicative of complex uplift tectonics after a subduction event.     

Two-stage corona growth during Precambrian granulite facies metamorphism of Smitbson Bjerge, north-west Greenland

Abstract Late Archaean orthogneisses and aluminous and iron-rich metasedimentary rocks intruded by anorthosite and a ferrodiorite-granite suite were completely recrystallized during Proterozoic granulite facies metamorphism. Geobarometry and geothermometry indicate P-T conditions of around 7.5kbar. 700°C, with a CO₂-rich fluid phase and logfO₂ at or below -16. A two-stage high-grade history of near isochemical corona growth is preserved in metasediments with the reaction cycle opx + plag + H₂O → hbl+gar+SiO₂→ opx+plag+H₂O. End product compositions resemble those of the initial phases, and the only mobile components were SiO₂ and/or H₂O. The coronas reflect shortlived fluctuations in chemical activity at essentially constant P and T, contrary to simple progressive change in equilibrium parameters recorded by most corona-bearing textures.     

Transformation of garnet epidote amphibolite to eclogite, western Dabie Mountains, China

Omphacite and garnet coronas around amphibole occur in amphibolites in the Hong'an area, western Dabie Mountains, China. These amphibolites consist of an epidote–amphibolite facies assemblage of amphibole, garnet, albite, clinozoisite, paragonite, ilmenite and quartz, which is incompletely overprinted by an eclogite facies assemblage of garnet, omphacite and rutile. Coronas around amphibole can be divided into three types: an omphacite corona; a garnet–omphacite–rutile corona; and, a garnet–omphacite corona with less rutile. Chemographic analysis for local reaction domains in combination with petrographical observations show that reactions Amp + Ab + Pg = Omp +Czo + Qtz + H₂O, and Amp + Ab = Omp ± Czo + Qtz + H₂O may lead to the development of omphacite coronas. The garnet–omphacite–rutile corona was formed from the reaction Amp + Ab + Czo + Ilm ± Qtz = Omp + Grt + Rt + H₂O. In garnet–omphacite coronas, the garnet corona grew during an early stage of epidote amphibolite facies metamorphism, whereas omphacite probably formed by the reactions forming the omphacite corona during the eclogite facies stage. It is estimated that these reactions occurred at 0.8–1.4 GPa and 480–610 °C using the garnet–clinopyroxene thermometer and omphacite barometer in the presence of albite.     

Fluid inclusions in granulites, granulitized eclogites and garnet clinopyroxenites from the Dabie–Sulu terranes, eastern China

Minor granulites (believed to be pre-Triassic), surrounded by abundant amphibolite-facies orthogneiss, occur in the same region as the well-documented Triassic high- and ultrahigh-pressure (HP and UHP) eclogites in the Dabie–Sulu terranes, eastern China. Moreover, some eclogites and garnet clinopyroxenites have been metamorphosed at granulite- to amphibolite-facies conditions during exhumation. Granulitized HP eclogites/garnet clinopyroxenites at Huangweihe and Baizhangyan record estimated eclogite-facies metamorphic conditions of 775–805 °C and ≥15 kbar, followed by granulite- to amphibolite-facies overprint of ca. 750–800 °C and 6–11 kbar. The presence of (Na, Ca, Ba, Sr)-feldspars in garnet and omphacite corresponds to amphibolite-facies conditions. Metamorphic mineral assemblages and P–T estimates for felsic granulite at Huangtuling and mafic granulite at Huilanshan indicate peak conditions of 850 °C and 12 kbar for the granulite-facies metamorphism and 700 °C and 6 kbar for amphibolite-facies retrograde metamorphism. Cordierite–orthopyroxene and ferropargasite–plagioclase coronas and symplectites around garnet record a strong, rapid decompression, possibly contemporaneous with the uplift of neighbouring HP/UHP eclogites.

Carbonic fluid (CO₂-rich) inclusions are predominant in both HP granulites and granulitized HP/UHP eclogites/garnet clinopyroxenites. They have low densities, having been reset during decompression. Minor amounts of CH₄ and/or N₂ as well as carbonate are present. In the granulitized HP/UHP eclogites/garnet clinopyroxenites, early fluids are high-salinity brines with minor N₂, whereas low-salinity fluids formed during retrogression. Syn-granulite-facies carbonic fluid inclusions occur either in quartz rods in clinopyroxene (granulitized HP garnet clinopyxeronite) or in quartz blebs in garnet and quartz matrices (UHP eclogite). For HP granulites, a limited number of primary CO₂ and mixed H₂O–CO₂(liquid) inclusions have also been observed in undeformed quartz inclusions within garnet, orthopyroxene, and plagioclase which contain abundant, low-density CO₂±carbonate inclusions. It is suggested that the primary fluid in the HP granulites was high-density CO₂, mixed with a significant quantity of water. The water was consumed by retrograde metamorphic mineral reactions and may also have been responsible for metasomatic reactions (“giant myrmekites”) occurring at quartz–feldspar boundaries. Compared with the UHP eclogites in this region, the granulites were exhumed in the presence of massive, externally derived carbonic fluids and subsequently limited low-salinity aqueous fluids, probably derived from the surrounding gneisses.     

Prograde metamorphic evolution and development of chloritoid-bearing eclogitic assemblages in subcontinental metagabbro (Sesia–Lanzo zone, Italy)

In the coronitic metagabbroic rocks of the Corio and Monastero metagabbro bodies in the continental Sesia–Lanzo zone of the western Italian Alps, a variety of mineral reactions that testify to prograde conditions from greenschist to eclogite-facies can be recognised. A microstructural and microchemical study of a series of samples characterized by coronitic textures and pseudomorphic replacement of the original igneous minerals has allowed the prograde reactions undergone by the rocks to be established.

In completely eclogitized coronitic samples, paragonite, blue amphibole, garnet, epidote, fine grained jadeite and chloritoid occur in plagioclase microdomains (former igneous plagioclase). The mafic mineral microdomains consist of glaucophane and garnet. Complexly-zoned amphiboles constrain changing metamorphic conditions: cores of pre-Alpine brown hornblende and/or tremolite are preserved inside rims of a sodic–calcic amphibole that are in turn surrounded by a sodic amphibole. The main high-pressure mineral assemblage, as seen in mylonites, involves glaucophane, chloritoid, epidote, garnet ± phengite, ± paragonite. Some layers within the gabbro contain garnet, omphacite, ± glaucophane, and acid dykes crosscutting the gabbro body contain jadeite, quartz, garnet, epidote and paragonite.

The presence of chloritoid-bearing high-pressure assemblages reflects hydration of the gabbros during their pre-Alpine exhumation prior to subduction, as well as the composition of the microdomains operating during subduction. The pressure and temperature conditions of gabbro transformation during subduction are inferred to be 450–550 °C at up to 2 GPa on the basis of the chloritoid-bearing assemblages. The factors controlling the reaction pathway to form chloritoid-bearing high-pressure assemblages in mafic rocks are inferred from these observations.