Hyperiid Amphipods (Crustacea: Peracarida) and Spring Mesoscale Features in the Gulf of Mexico

Abstract. The distribution and abundance of the hyperiid amphipods collected during April–May 1986 was analysed in order to study their relationship to mesoscale features in the southern Gulf of Mexico. Hyperiids were represented by 79 species, Lestrigonus bengalensis (65% of total hyperiids), Primno abyssalis (4.3%), Anchylomera blossevillei (2.3%) and Lestrigonus schizogeneios (2.3%) being the most abundant. Several mesoscale features (two cyclonic and three anticyclonic eddies, two upwelling areas) were active in the surveyed area. Cluster analysis of density and composition produced five groups of stations that were found to be related to some of these features. Overall, the mesoscale features that most influenced the local hyperiid community were the upwelling areas; they were related both with the highest and the lowest hyperiid densities and with high and low diversity figures. Overall day/night variations were normal, with highest night‐time densities; this pattern was not consistent in the different mesoscale features studied. Reverse migrations were possibly occurring, or migration patterns were lacking, at some of these systems. The hyperiid community structure related to the anticyclonic eddies differed somewhat among the eddies; however, the oceanographic exchange with the surrounding gulf waters probably obscured sharper faunistic differences between the communities.     

2D modeling of overpressure in a salt withdrawal basin,Gulf of Mexico,USA

This study demonstrates the utilization of 2D basin models to address overpressure development due to compaction disequilibrium in supra-allochthonous salt mini-basins with very high sedimentation rates in the Gulf of Mexico. By properly selecting 2D line sections with moderate stratigraphic resolution, it is possible to predict timing of overpressure development and approximate present-day overpressure distributions in the mini-basin. This study shows that even low resolution models with approximate information on the net-to-gross (sand:shale ratio) can average ±0.4 ppg with a maximum error of 1.0 ppg relative to pressure measurements in sandstones. The models based on age, depth, approximate lithology and an interpretation of complicated salt movement are adequate to evaluate pressure to address issues around trap containment and may be used for preliminary well planning. This study tested the results of overpressure prediction utilizing different stratigraphic resolutions and shows the sensitivity of overpressure modeling to 2D line selection. Also, three models were built to investigate how the permeability of salt welds affects overpressure development in an adjacent salt mini-basin. These results indicate that even a salt weld permeability reduction of 1.5 log mD results in a pressure difference between neighboring mini-basins. Additionally, these models qualitatively reproduced the seismic velocity volume which is supporting evidence that the salt welds in this mini-basin are at least partially sealing.     

Benthic foraminifera living in Gulf of Mexico bathyal and abyssal sediments: Community analysis and comparison to metazoan meiofaunal biomass and density

Benthic foraminiferal biomass, density, and species composition were determined at 10 sites in the Gulf of Mexico. During June 2001 and 2002, sediment samples were collected with a GoMex box corer. A 7.5-cm diameter subcore was taken from a box core collected at each site and sliced into 1-cm or 2-cm sections to a depth of 2 or 3 cm; the >63-μm fraction was examined shipboard for benthic foraminifera. Individual foraminifers were extracted for adenosine triphosphate (ATP) using a luciferin–luciferase assay, which indicated the total ATP content per specimen; that data was converted to organic carbon. Foraminiferal biomass and density varied substantially (2–53 mg C m⁻²; 3600–44,500 individuals m⁻², respectively) and inconsistently with water depth: although two 1000-m deep sites were geographically separated by only 75 km, the foraminiferal biomass at one site was relatively low (9 mg C m⁻²) while the other site had the highest foraminiferal biomass (53 mg C m⁻²). Although most samples from Sigsbee Plain (>3000 m) had low biomass, one Sigsbee site had >20 mg foraminiferal C m⁻². The foraminiferal community from all sites (i.e. bathyal and abyssal locales) was dominated by agglutinated, rather than calcareous or tectinous, species. Foraminiferal density never exceeded that of metazoan meiofauna at any site. Foraminiferal biomass, however, exceeded metazoan meiofaunal biomass at 5 of the 10 sites, indicating that foraminifera constitute a major component of the Gulf's deep-water meiofaunal biomass.     

Cycling the Representer Method for 4D-variational data assimilation with the Navy Coastal Ocean Model

The Cycling Representer Method, which is a technique for solving 4D-variational data assimilation problems, has been demonstrated to improve the assimilation accuracy with simpler nonlinear models. In this paper, the Cycling Representer Method will be used to assimilate an array of ADCP velocity observations with the Navy Coastal Ocean Model (NCOM). Experiments are performed in a high-resolution Mississippi Bight domain for the entire month of June, 2004 and demonstrate the usefulness of this assimilation technique in a realistic application.The Representer Method is solved by minimizing a cost function containing the weighted squared errors of velocity measurements, initial conditions, boundary conditions, and model dynamics. NCOM, however, is a highly nonlinear model and in order to converge towards the global minimum of this cost function, NCOM is linearized about a background state using tangent linearization. The stability of this tangent linearized model (TLM) is a very sensitive function of the background state, the level of nonlinearity of the model, open boundary conditions, and the complexity of the bathymetry and flow field. For the Mississippi Bight domain, the TLM is stable for only about a day. Due to this short TLM stability time period, the Representer Method is cycled by splitting the time period of the assimilation problem into short intervals. The interval time period needs to be such that it is short enough for the TLM to be stable, but long enough to minimize the loss of information due to reducing the temporal correlation of the dynamics and data. For each new cycle, a background is created as a nonlinear forecast from the previous cycle’s assimilated solution. This background, along with the data that falls within this new cycle, is then used to calculate a new assimilated solution. The experiments presented in this paper demonstrate the improvement of the assimilated solution as the time window of the cycles is reduced to 1 day. The 1-day cycling, however, was only optimal for the first half of the experiment. This is because there was a strong wind event near the middle of June that significantly reduced the stability of the 1-day cycling and caused substantial errors in the assimilation. Therefore, the 12-h cycling worked best for the second half of the experiment. This paper also demonstrates that the forecast skill is improved as the assimilation system progresses through the cycles.     

Meiofaunal community structure of the deep-sea Gulf of Mexico: Variability due to the sorting methods

Studies designed to describe the structure of soft bottom meiobenthic communities have used diverse sorting methods, thus making the comparison of results difficult. This study compared sorting specimens using the manual and centrifuge density gradient sorting methods, for two deep-sea depth zones [continental slope (1630–1860 m) and abyssal plain (3720–3830 m)] in the southwestern Gulf of Mexico. The manual sorting method produced more taxonomic groups and higher abundance and biomass values, compared to the differential density Ludox-centrifuge sorting method. The results obtained from the two sorting methods suggest that distribution patterns of deep-sea meiofaunal samples can be an artefacts of the sorting.     

Evaluation of two WAM white capping parameterizations using parallel unstructured SWAN with application to the Northern Gulf of Mexico, USA

The performance of two well accepted formulations for white capping and wind input of third generation wave models, viz., WAM-3 and WAM-4, were investigated using parallel unstructured SWAN (PunSWAN). Several alternative formulations were also considered to evaluate the effects of higher order steepness and wave number terms in white capping formulations. Distinct model configurations were calibrated and validated against available in situ measurements from the Gulf of Mexico. The results showed that some of the in situ calibrated models outperform the saturation level calibrated models in reproducing the idealized wave growth curves. The simulation results also revealed that increasing the power of the steepness term can enhance the accuracy of significant wave height (H_s), at the expense of a higher bias for large waves. It also has negative effects on mean wave period (T_a) and peak wave period (T_p). It is also demonstrated that the use of the quadratic wave number term in the WAM-3 formulation, instead of the existing linear term, ameliorates the T_a underestimation; however, it results in the model being unable to reach any saturation level. In addition, unlike H_s and T_p, it has been shown that T_a is sensitive to the use of the higher order WAM-4 formulation, and the bias is decreased over a wide range of wave periods. However, it also increases the scatter index (SI) of simulated T_a. It is concluded that the use of the WAM-4 wind input formulation in conjunction with the WAM-3 dissipation form, is the most successful case in reproducing idealized wave growth curves while avoiding T_a underestimation of WAM-3 and a potential spurious bimodal spectrum of WAM-4; consequently, this designates another perspective to improve the overall performance of third generation wave models.     

Gulf of Mexico Ecosystem Service Valuation Database (GecoServ): Gathering ecosystem services valuation studies to promote their inclusion in the decision-making process

The main goals of the Gulf of Mexico Ecosystem Service Valuation Database (GecoServ), an inventory of ecosystem services (ES) valuation studies applicable to the Gulf of Mexico, are to allow for the distribution and sharing of information about said studies and to identify current gaps in the ES valuation literature.The utility of GecoServ (http://www.gecoserv.org) lies in that it fills a void left by non-ES specific environmental databases, highlights the lack of studies for some ecosystems and associated services, and provides background information for future ES valuation studies.GecoServ functions as a uniquely centralized source of information for both researchers and natural resource managers. Researchers can find information for different study sites to be used in value transfer methods. For managers, instead, GecoServ is a tool that provides them with ES values to inform their decision-making process.     

Salt tectonics and Pliocene stratigraphic framework at MC-118, Gulf of Mexico: An integrated approach with application to deep-water confined structures in salt basins

Integrated tectono-stratigraphic interpretation at MC-118 using 3D seismic, well logs and biostratigraphy reveals an area dominated by allochthonous salt and its related structures. OCS-Block MC-118 is located 130 km southeast of New Orleans on the Gulf of Mexico middle slope in ∼2600 ft of water.The area is divided into three domains based on their structural styles: (1) a western domain consisting of a basinward-dipping normal fault family and associated strata; (2) a central domain composed of a landward-plunging diapiric salt tongue canopy and associated salt welds, two flanking NE–SW trending salt-withdrawal mini-basins, and a crestal fault family; and (3) an eastern domain comprised of basinward/landward-dipping normal and listric normal fault families with their associated rollovers. These structural domains are genetically-and-kinematically related to the salt structure and extend beyond MC-118 boundaries. The salt structure is postulated to have evolved mostly passive, with punctuated active episodes, and by lateral spreading. This is part of a larger regional structure, eastern Gulf of Mexico, which involves some amalgamation between small-scale salt canopies and salt diapirs although collectively they appear mostly disconnected.A Pliocene (3.13–4.95 Ma) third-order genetic stratigraphic sequence, the focus of this study, is as much as ∼3600 ft thick within the mini-basins and contains: muddy mass transport complexes; sandy slope fans; muddy turbidites and condensed sections; and transitional facies flanking the salt structure that collectively have ponded and wedged external geometries. Mass transport complexes and muddy turbidites and condensed sections make most of the studied genetic sequence in a mud-dominated deltaic setting eastern Gulf of Mexico.Facies kinematic indicators and a matching number of genetic sequences accounted on the sea level chart support a eustatically driven mini-basin sedimentation. Nonetheless salt still plays a role in sedimentation (secondary/minor) by slumping generated during passive/active salt diapiric evolution.     

Organic matter in deepwater sediments of the Northern Gulf of Mexico and its relationship to the distribution of benthic organisms

Sediment samples were selected from 28 sites across the deep (212–3527 m) northern Gulf of Mexico (GOM) as part of the Deep Gulf of Mexico Benthos (DGoMB) program, and analyzed for geochemical parameters related to organic carbon (OC) distribution and characteristics. The results of this study indicate that the OC content of sediments in the deep northern GOM is controlled by several factors; including water depth, overlying water productivity, sediment carbonate content, sediment oxygen exposure time, OC sources, and regional influences. The best correlation between sediment OC content, on a CaCO₃-free basis, and other parameters examined was an inverse correlation of OC with water depth. The OC/SA ratio had a wide range of values and, along with variable sources of sedimentary OC, indicated that the organism-available concentration of metabolizable organic matter may not be simply related to sedimentary OC content. This was perhaps reflected in the observation that benthic macrofaunal and meiofaunal biomass abundances were well correlated with sedimentary OC, but the abundance of bacteria in sediments was not.     

Ecological and biological strategies of Etropus crossotus and Citharichthys spilopterus (Pleuronectiformes:Paralichthyidae) related to the estuarine plume, Southern Gulf of Mexico

Differences in the biological and ecological strategies of two tropical flatfishes, Etropus crossotus (fringed flounder) and Citharichthys spilopterus (bay whiff) are discussed. The comparative analysis was based on the seasonal distribution of relative abundance of the two species and flatfish movements utilizing estuarine plume influenced areas as part of their life cycles. Growth parameters of the von Bertalanffy equation and recruitment were estimated (FISAT software) to compare life cycle patterns. The recruitment patterns illustrate the key difference between “estuarine-dependent” and “estuarine-related” nekton strategies. Both species have a short life cycle with a continuous recruitment activity. E. crossotus is an estuarine-related species, with two recruitment pulses (winter frontal season), in the estuarine plume on the shelf. C. spilopterus is an estuarine-dependent species, with a main recruitment pulse during the rainy season in the estuarine plume, and a residual secondary pulse inside the adjacent estuarine system (Terminos Lagoon). The results show that the ecological success of these tropical coastal marine flatfish, with similar biological patterns, is based upon the sequential use (in time and space) of estuarine plume influenced habitats, suggesting that fish migration to shallow waters is related to food availability changes as a strategy towards optimum recruitment.     

Molecular weight and chemical reactivity of dissolved trace metals (Cd,Cu, Ni) in surface waters from the Mississippi River to Gulf of Mexico

It is generally assumed that estuarine mixing is continuous for metals from terrestrial sources, gradually decreasing towards the open ocean endmember. Here we show that, chemical reactivity, determined by ion exchange method, and molecular weight distributions, obtained using cross-flow ultrafiltration, of dissolved Cd, Cu, and Ni in the surface waters of the Gulf of Mexico varied systematically across the estuarine mixing zone of the Mississippi River. Most size or chemical affinity fractions of dissolved metals (<0.4 μm) were linearly related to salinity (10.8–36.6), suggesting that the distribution of these elements was mainly controlled by continuous mixing processes. Dissolved concentrations across the salinity gradient ranged for Cd: 87–187 pM; Cu: 1.4–18.3 nM; and Ni: 2.6–18.8 nM, with highest values near the Mississippi river mouth, and lowest concentrations in a warm core ring in the Gulf of Mexico. Dissolved Cd was mostly present as a truly dissolved (<10 kDa, 97 ± 1%) and cationic fraction (Chelex-100 extractable, 94 ± 4%). A novel observation across the estuarine mixing zone was that colloidal metal concentrations were identical to either inert (for Cu, Ni) or AMPG-labile anionic (Cu, Cd) fractions. The difference in behavior between Cu and the other two metals might indicate differences in the biopolymeric nature of the metal–organic chelates. In particular, the anionic-organic Cd fractions accounted for just 3 ± 1%, on average. However, for Cu, it was 24 ± 4%, and for Ni, it was 9 ± 6%. The fractions of the total dissolved metal fractions that were “inert” averaged 31 ± 10% for Cu and 29 ± 12% for Ni. Small but noticeable amounts (6 ± 3%) of dissolved inert Cd fractions were also present. Apparent non-local transport processes, likely associated with cross-shelf sediment resuspension processes, could have been responsible for the relatively high concentrations of ‘inert’ and ‘anionic’ metal fractions in high salinity coastal waters, and accounting for the persistence of metals bound to humic substances in the Gulf of Mexico.     

Deep-sea hydrocarbon seep gastropod Bathynerita naticoidea responds to cues from the habitat-providing mussel Bathymodiolus childressi

Bathynerita naticoidea (Gastropoda: Neritidae) is a numerically dominant heterotrophic gastropod found at hydrocarbon seep sites on the upper Louisiana slope of the Gulf of Mexico. Snails of this species are commonly associated with beds of the methanotrophic mussel Bathymodiolus childressi (Bivalvia: Mytilidae), and their population structure mirrors that of the mussels they are found among. Previous studies have shown that these snails feed on bacteria and decomposing periostracum on the B. childressi shell. We predicted that B. naticoidea might be attracted to cues specific to its preferred habitat, such as dissolved methane, mucus from conspecific snails, or metabolites produced by B. childressi mussels. To examine this, we used a flow‐through Y‐maze system to investigate the behavior of B. naticoidea exposed to these potential cues. We found that the nerite is not attracted to methane, but is strongly attracted to seawater conditioned with B. childressi. The attractant appears to be specific to this type of mussel, and is not a soluble cue produced by conspecific snails.     

Sensitivity of hurricane surge to morphological parameters of coastal wetlands

Given the history and future risk of storm surge in the United States, functional storm protection techniques are needed to protect vital sectors of the economy and coastal communities. It is widely hypothesized that coastal wetlands offer protection from storm surge and wave action, though the extent of this protection is unknown due to the complexities of flow through vegetation. Here we present the sensitivity of storm-surge numerical modeling results to various coastal wetlands characteristics. An idealized grid domain and 400-km² marsh feature were used to evaluate the effects of marsh characteristics on hurricane surge, including the effects of bottom friction, elevation, and continuity (the ratio of healthy marsh to open water area within the total wetland area).Through coupled hydrodynamic and wave model simulations, it is confirmed that increased bottom friction reduces storm-surge levels for most storms. However, increases in depth associated with marsh elevation loss generally results in a reduction of surge. As marsh continuity is decreased, coastal surge increases as a result of enhanced surge conveyance into and out of the marsh. Storm surge is parameterized in terms of marsh morphology, namely marsh elevation, frictional characteristics, and degree of segmentation, which will assist in the justification for and optimization of marsh restoration in terms of storm protection.     

Seasonality and interannual variability of freshwater inflow to a large oligohaline estuary in the Northern Gulf of Mexico

Quantity, timing, duration, and fluctuation of freshwater inflow are important factors affecting the development and health of aquatic and adjacent wetland ecosystems in coastal estuaries. This study assessed six decades of freshwater inflow from the Amite River, Tickfaw River, and Tangipahoa River watersheds to Lake Pontchartrain, a large oligohaline estuary in the Northern Gulf of Mexico, whose flood waters caused recent damage to the city of New Orleans in the aftermath of Hurricane Katrina. By utilizing the long-term (1940–2002) river discharge and climatic data from the three major tributary watersheds, monthly and annual freshwater inflows have been quantified and their spatial and temporal variations have been analyzed. On average, the three rivers discharged (±standard error) 0.27 ± 0.04 km³ freshwater monthly and 3.29 ± 0.15 km³ freshwater annually into the lake estuarine system, with the highest inflow from the Amite River (0.16 ± 0.03 m³ mon⁻¹, and 1.91 ± 0.09 km³ yr⁻¹) and the lowest inflow from the Tickfaw River (0.03 ± 0.00 km³ mon⁻¹, and 0.34 ± 0.02 km³ yr⁻¹). A distinct seasonality was evident with over 69% of the total annual inflow occurring during December and May (wet months) and with a low flow period from August to November (dry months). The monthly inflow during the wet months was positively correlated with the monthly precipitation (r² = 0.64), while the monthly inflow during the dry months was subject to evapotranspiration. Furthermore, the study found a 20-year low flow period from 1954–1973 (2.76 ± 0.24 km³ yr⁻¹) and a 24-year high flow period from 1975–1998 (3.84 ± 0.24 km³ yr⁻¹), coinciding with both the climate variation and population growth in the watersheds.     

剪土环对筒型基础负压沉贯下沉过程中渗流场的影响研究

筒型基础沉放施工中,随着入土深度的增加,筒体所受的侧摩阻力越大,当达到一定程度时,将导致基础无法继续下沉.为了避免这种情况的发生,在实际的施工中可以在锚体上设置剪土环以减小侧摩阻力的影响.论文针对海上吸力锚基础这一新型海洋平台基础形式研究中面临的吸力锚负压沉贯下沉中设置剪土环及剪土环对其渗流场的影响这一问题,通过对吸力锚渗流场的有限元分析,运用有限元软件ANSYS对锚体周围土体渗流场进行建模分析,利用有限元计算的结果来分析剪土环对渗流场的影响.     

Bred-ensemble ocean forecast of loop current and rings

Ocean forecasting with a General Circulation Model (GCM) commonly begins from an initial analysis obtained by data assimilation. Instead of a single initial state, bred-ensemble forecast [BEnF; which is used for weather forecasting at the National Centers for Environmental Prediction] begins from an ensemble of initial states obtained by using the GCM to breed fast-growing modes into the analysis. Here we apply the technique to forecast the locations and strengths of the Loop Current and rings from July through September 2005. Model results are compared against satellite observations, surface drifter trajectories, and moored currents. It is found that BEnF gives closer agreements with observations than the conventional single forecast. The bred-vectors (perturbed minus unperturbed state-vectors) have growth rates ≈0.04–0.08 day⁻¹ and spatial (cyclone–anticyclone) scales ≈200–300 km suggestive of baroclinic instability mode in the Loop Current and rings. As in atmospheric applications, initializations with these growing vectors contribute to the more accurate ensemble mean forecast.     

FVCOM 在龙口海域潮汐潮流模拟中的应用研究

利用不规则三角网格和有限体积方法的FVCOM(finite-volume coastal ocean model)模式,建立了高分辨率的龙口海域三维潮汐潮流数值模型,模式结果与实测结果吻合良好。根据计算水位和流速得到了精细的龙口海域M2,S2,K1,O1分潮的同潮图、潮汐潮流类型分布图和潮流椭圆分布图等。结果显示,龙口海域潮汐类型主要为不规则半日潮;屺姆岛以北海域多为往复流而龙口湾内同时存在旋转方向不同的旋转流;最大可能流速分布与岸线和等深线几乎平行,最大值出现在桑岛南侧的狭窄水道;该海域的潮汐余流极大值出现在屺姆岛的西侧,余流流速可达25 cm/s。该结论对于了解龙口海域的动力过程具有重要意义。     

山东半岛北及东沿岸海域冬季的逆温跃层及其与深底层逆流的关系

引用《渤海、黄海、东海海洋图集——水文》分册中有关逆温跃层分布变化图幅以及海流和温、盐度历史资料 ,指出山东半岛北及东沿岸区域冬季出现的逆温跃层现象与这里冬季潜伏于深底层暖流水有密切关系 ,并进一步认为围绕山东半岛北及东沿岸海域冬季的海水交换可能呈 2层模式 :在上层 ,低温、低盐的沿岸水自西向东南下 ;在深底层 ,相对高温、高盐的逆流水北上自东向西有直逼渤海海峡南部的势头。