<Emphasis Type="Italic">R/S</Emphasis> analysis of the <Emphasis Type="Italic">Dst</Emphasis> index

The paper addresses estimation of the Hurst exponent for time series of the hourly values of the Dst index for the period from 1957 to 2011. It is found that the Hurst exponent is 0.79–0.94 for yearly intervals and 0.8–1.0 for monthly intervals. Based on R/S graphs, the Dst cycles are identified; they range from 3–4 months to 2.2 years and from 8.5 to 22 years in length. It is shown that a Dst time series can be quite satisfactorily described by an α-stable Levy process.     

Origination of <Emphasis Type="Italic">G</Emphasis> conditions in the ionospheric <Emphasis Type="Italic">F</Emphasis> region depending on solar and geomagnetic activity

The dependence of the origination of G conditions in the ionospheric F region on solar and geomagnetic activity has been determined based on numerical simulation of the ionosphere over points 50° N, 105° E and 70° N, 105° E for summer conditions at noon. It has been found that the threshold value of the Kp geomagnetic activity index (Kp _S ), beginning from which a G condition can originate, is minimal for a low solar activity level at relatively high latitudes during the recovery phase of a geomagnetic storm. On average, Kp _S increases with increasing solar activity, but G conditions can originate at high solar activity levels and be absent at moderate ones for certain Kp values, which was apparently predicted for the first time. These properties of the origination of G conditions do not contradict the known results of a G-condition statistical analysis performed based on the data from the global network of ionospheric stations.     

Linear transformations of anomalous potential fields using <Emphasis Type="Italic">S</Emphasis> and <Emphasis Type="Italic">R</Emphasis> approximations

Methods for linear transformations of anomalous physical fields based on R and S approximations of the elements of the initial field are described. The results of the numerical experiment and analytical extension of the gravity field measured in a detailed gravity survey in two regions of Russia are presented.     

Dispersion Measurements of <Emphasis Type="Italic">P</Emphasis> Waves and their Implications for Mantle <Emphasis Type="Italic">Q</Emphasis><Subscript><Emphasis Type="Italic">p</Emphasis></Subscript>

We analyze the anelasticity of the earth using group delays of P-body waves of deep (>200 km) events in the period range 4–32 s for epicentral distances of 5–85 degrees. We show that Time Frequency Analysis (TFA), which is usually applied to very dispersive surface waves, can be applied to the much less dispersive P-body waves to measure frequency-dependent group delays with respect to arrival times predicted from the CMT centroid location and PREM reference model. We find that the measured dispersion is due to: (1) anelasticity (described by the P-wave quality factor Q _p ), (2) ambient noise, which results in randomly distributed noise in the dispersion measurements, (3) interference with other phases (triplications, crustal reverberations, conversions at deep mantle boundaries), for which the total dispersion depends on the amplitude and time separation between the different phases, and (4) the source time function, which is dispersive when the wavelet is asymmetrical or contains subevents. These mechanisms yield dispersion ranging in the order of one to 10 seconds with anelasticity responsible for the more modest dispersion. We select 150 seismograms which all have small coda amplitudes extending to ten percent of the main arrival, minimizing the effect of interference. The main P waves have short durations, minimizing effects of the source. We construct a two-layer model of Q _p with an interface at 660 km depth and take Q _p constant with period. Our data set is too small to solve for a possible frequency dependence of Q _p . The upper mantle Q ₁ is 476 [299–1176] and the lower mantle Q ₂ is 794 [633–1064] (the bracketed numbers indicate the 68 percent confidence range of Q _p ^–1). These values are in-between the AK135 model (Kennett et al., 1995) and the PREM model (Dziewonski and Anderson, 1981) for the lower mantle and confirm results of Warren and Shearer (2000) that the upper mantle is less attenuating than PREM and AK135.     

Behavior of <Emphasis Type="Italic">foF</Emphasis>2 and <Emphasis Type="Italic">hmF</Emphasis>2 after sunset

The time behavior of the foF2 and hmF2 values at the time moment T(ss + 2 h) 2 h after sunset is considered. It is assumed that at this moment, the horizontal winds in the thermosphere in the strongest way influence hmF2 and, therefore, foF2. It is found that a fairly well pronounced and statistically significant change (trend) is observed for the foF2(ss + 2)/foF2(14) ratio, the sign of the change being different for different stations and even different seasons at the same station. A similar picture is obtained for the value of hmF2(ss + 2). It is shown that a positive correlation between the trends of these two values is observed. This confirms the initial concept of the paper that the foF2 and hmF2 trends are caused by long-term trends in the thermospheric dynamics.     

Dependence of geomagnetic disturbances on extreme values of the solar wind <Emphasis Type="Italic">E</Emphasis><Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> component

The dependence of the zonal geomagnetic indices (AE, Ap, Kp, Kn, and Dst) on the solar wind parameters (the electric field E _y component, dynamic pressure P _d and IMF irregularity σB) has been studied for two types of events: magnetic clouds and high-speed streams. Based on the empirical relationships, it has been established that the AE, Ap, Kp, and Kn indices are directly proportional to the E _y value at E _y < 12 mV m^?1 and are inversely proportional to this value at E _y > 12 mV m^?1 for the first-type events. On the contrary, the dependence of Dst on E _y is monotonous nonlinear. A linear dependence of all geomagnetic indices on E _y is typical of the second-type events. It has been indicated that the specific features of geoeffectiveness of magnetic clouds and high-speed solar wind streams are caused by the dependence of the electric field potential across the polar cap on the electric field, solar wind dynamic pressure, and IMF fluctuations.     

Climate changes associated with high-amplitude <Emphasis Type="Italic">Sq</Emphasis> geomagnetic variations

When the solar irradiance propagates between the outer magnetospheric regions and the ionosphere, dynamic processes of the magnetosphere-ionosphere-thermosphere system are affected at the lower end of their paths by the interaction of radiation with the neutral troposphere. The main target of this work is to investigate the relationship between the diurnal magnetic field variations resulting from solar activities and the variation in the troposphere temperature. Meteorological and geomagnetic data acquired from different observatories located in Egypt, Portugal and Slovakia in a long-term and daily-term scales were analyzed.     

Recovery of data on interplanetary medium parameters based on the <Emphasis Type="Italic">aa</Emphasis> index of geomagnetic activity

The average annual values of the electric field and parameters of the solar wind and IMF from our time to 1868 have been estimated based on the statistical relation between the aa index of geomagnetic activity and the interplanetary medium parameters. This estimation indicates that the relative variations during the 20th century were observed in the electric field (25 ± 3%), the IMF vector component transverse with respect to the velocity (16 ± 3%), and the solar wind plasma velocity (9 ± 1%, 37 ± 4 km/s). The modulus of the IMF vector radial component increased by 9.0 ± 2.5% during this period.     

<Emphasis Type="Italic">Q</Emphasis><Subscript>c</Subscript> and <Emphasis Type="Italic">Q</Emphasis><Subscript>S</Subscript> wave attenuation of South African earthquakes

Quality factor Q, which describes the attenuation of seismic waves with distance, was determined for South Africa using data recorded by the South African National Seismograph Network. Because of an objective paucity of seismicity in South Africa and modernisation of the seismograph network only in 2007, I carried out a coda wave decay analysis on only 13 tectonic earthquakes and 7 mine-related events for the magnitude range 3.6?≤?M _L ?≤?4.4. Up to five seismograph stations were utilised to determine Q _c for frequencies at 2, 4, 8 and 16 Hz resulting in 84 individual measurements. The constants Q ₀ and α were determined for the attenuation relation Q _c(f)?=?Q ₀ f ^α . The result was Q ₀?=?396?±?29 and α?=?0.72?±?0.04 for a lapse time of 1.9*(t _s???t ₀) (time from origin time t ₀ to the start of coda analysis window is 1.9 times the S-travel time, t _s) and a coda window length of 80 s. This lapse time and coda window length were found to fit the most individual frequencies for a signal-to-noise ratio of at least 3 and a minimum absolute correlation coefficient for the envelope of 0.5. For a positive correlation coefficient, the envelope amplitude increases with time and Q _c was not calculated. The derived Q _c was verified using the spectral ratio method on a smaller data set consisting of nine earthquakes and one mine-related event recorded by up to four seismograph stations. Since the spectral ratio method requires absolute amplitudes in its calculations, site response tests were performed to select four appropriate stations without soil amplification and/or signal distortion. The result obtained for Q _S was Q ₀?=?391?±?130 and α?=?0.60?±?0.16, which agrees well with the coda Q _c result.     

A new <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> estimation parameter for use in earthquake early warning systems

We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ _c and P _d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M _s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M _s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 ^Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.     

Long-term changes in the relation between <Emphasis Type="Italic">foF</Emphasis>2 and <Emphasis Type="Italic">hmF</Emphasis>2

The change in the dependence of the F2-layer critical frequency on its height hmF2 is considered based on two sources of initial data used earlier by the authors. It is found that the slope k of the foF2 dependence on hmF2 systematically decreases from the earlier (“etalon”) period, 1958–1980, to the later periods of 1988–2010, 1998–2010, and 1998–2014. Since the foF2 value depends on the atomic oxygen concentration in the F region much more strongly than hmF2, the found decrease in k confirms the concept of a decrease in the atomic oxygen concentration in the thermosphere with time previously formulated by the authors.     

Mechanisms of stratification of the <Emphasis Type="Italic">F</Emphasis>2 layer and formation of the <Emphasis Type="Italic">F</Emphasis>3 and <Emphasis Type="Italic">G</Emphasis> layers in the equatorial ionosphere

The paper is dedicated to the studies of formation mechanisms of additional layers in the equatorial ionosphere carried out using numerical simulations with use of the Global Self-Consistent Model of the Thermosphere, Ionosphere, and Protonosphere (GSM TIP) modified in the part of the solution of the electric field equation in the Earth’s ionosphere. Calculations were preformed for quiet geomagnetic conditions using the MSIS-90 model for the calculation of thermospheric parameters. The obtained spatio-temporal pattern of thermospheric circulation and the variations in the dynamo electric field obtained on its basis make it possible to reproduce the stratification effect of the F2 layer and the appearance of the F3 layer in the equatorial ionosphere due to the action of the nonuniform in height zonal electric field at the geomagnetic equator. On the basis of the earlier presented results of calculations using the modified GSM TIP model, the appearance of a maximum in the vertical profile of the electron density at a height of ∼1000 km formed by H+ ions, which we called the G layer, has been predicted. Numerical simulations showed that this layer is formed by the meridional component of the thermospheric wind and is related to the formation of the nighttime midlatitude maximum at heights of the ionospheric F region.     

Multi-scale Tomography for Crustal <Emphasis Type="Italic">P</Emphasis> and <Emphasis Type="Italic">S</Emphasis> Velocities in Southern California

Seismic tomography is a viable tool in building depth-velocity models in the presence of strong lateral velocity variations. In this study 3-D P- and S-velocity models for the crust of southern California are constrained using more than 1,000,000 P-wave first arrivals and 130,000 S-wave arrivals from local earthquakes. To cope with the uneven distribution of raypaths, a multi-scale tomography is applied with overlapping model cells of different sizes. Within the 300 × 480 × 39 km³ model volume, the smallest cell size is 10 × 10 × 3 km³. During the iterations of velocity updating, earthquake hypocenters are determined using both P and S arrivals, and full 3-D ray tracing is implemented. Except near the edges and in the lower crust, the resultant models are robust according to various tests on the effects of reference models, resolution and signal-to-noise ratio. The tomographic velocities at shallow depths correlate very well with the regional geology of southern California. In the upper crust the P-wave and S-wave models exhibit slow velocities in major sedimentary basins and fast velocities in areas of crystalline rocks. Mid-crustal low velocity zones are present under the Coso Range, San Gabriel Mountains, and a large portion of the Mojave Desert. P- and S-velocity patterns maintain their similarity in the lower crust though the models are less reliable there.     

Combined Method of <Emphasis Type="Italic">F</Emphasis>-, <Emphasis Type="Italic">S</Emphasis>-, and <Emphasis Type="Italic">R</Emphasis>-Approximations of Increased Dimensionality in Solving the Problems of Geophysics and Geomorphology

The interrelation between different variants of the method of linear integral representations in the spaces of an arbitrary dimension is considered. The combined approximations of the topography and geopotential fields allows the selection of the optimal parameters of the method in solving a wide range of inverse problems in geophysics and geomorphology, as well as a most thorough use of the a priori information about the elevations and elements of anomalous fields. A method for numerically solving an inverse problem on finding the equivalent, in terms of the external field, mass distributions in the ordinary three-dimensional (3D) space and in the four-dimensional (4D) space is described.     

Attenuative Dispersion of <Emphasis Type="Italic">P</Emphasis> Waves and Crustal <Emphasis Type="Italic">Q</Emphasis> in Turkey and Germany

We have measured group delays of the spectral components of high-frequency P-waves along two portions of the North Anatolian Fault Zone (NAFZ) in Turkey and in a region of southern Germany. Assuming that the observed dispersion is associated with attenuation in the crust and that it can be described by a continuous relaxation model, we obtained Q and the high-frequency relaxation times for those waves for each of the three regions. Individual P-wave Q values exhibit large scatter, but mean values in the NAFZ increase from about 25 to 60 over the distance range 5–90 km. Mean Q values are somewhat higher in the eastern portion of the NAFZ than in the western portion for measurements made at distances between 10 and 30 km. P-wave Q values in Germany range between about 50 and 300 over the hypocentral distance range 20–130 km. In that region we separated the effects of Q for basement rock (2–10 km depth) from that of the overlying sediment (0–2 km depth) using a least-squares method. Q varies between 100 and 500 in the upper 8–10 km of basement, with mean values for most of the distance range being about 250. Q in the overlying sediments ranges between 6 and 10. Because of large scatter in the Q determinations we investigated possible effects that variations of the source-time function of the earthquakes and truncation of the waveform may have on Q determinations. All of our studies indicate that measurement errors are relatively large and suggest that useful application of the method requires many observations, and that the method will be most useful in regions where the number of oscillations following the initial P pulse is minimized. Even though there is large scatter in our Q determinations, the mean values that we obtained in Turkey are consistent with those found in earlier studies. Our conclusions that Q is significantly higher in the basement rock of Germany than in the basement rock of Turkey and that Q is lower in western Turkey than in eastern Turkey are also consistent with results of Q studies using Lg coda.     

Combined method of <Emphasis Type="Italic">F</Emphasis>-, <Emphasis Type="Italic">S</Emphasis>-, and <Emphasis Type="Italic">R</Emphasis>-approximations in solving the problems of geophysics and geomorphology

The interrelation between different modifications of the method of linear integral representation is studied. Combined approximations of the topography and geopotential fields enable more refined tuning of the method in solving inverse problems of geophysics and geomorphology and provide a more complete allowance for the a priori information about the surface elevation data and elements of anomalous fields. A technique for finding the numerical solution for the inverse problem for determining the mass distributions equivalent in terms of the external field is presented. The results of the mathematical experiment are discussed.     

Dayside auroras during unusually large positive values of the IMF <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">z</Emphasis></Subscript> component

The characteristics of dayside auroras during the large (16–24 nT) positive values of the IMF B _z component, observed on January 14, 1988, during the interaction between the Earth’s magnetosphere and the body of the interplanetary magnetic cloud, have been studied based on the optical observations on Heiss Island. A wide band of diffuse red luminosity with an intensity of 1–2 kilorayleigh (kR) was observed during 6 h in the interval 1030–1630 MLT at latitudes higher than 75° CGL. Rayed auroral arcs, the brightness of which in the 557.7 nm emission sharply increased to 3–7 kR in the postnoon sector immediately after the polarity reversal of the IMF B _y component from positive to negative, were continuously registered within the band. Bright auroral arcs were observed at the equatorward edge of red luminosity. It has been found out that the red auroral intensity increases and the band equatorward boundary shifts to lower latitudes with increasing solar wind dynamic pressure. However, a direct proportional dependence of the variations in the auroral features on the dynamic pressure variations has not been found. It has been concluded that the source of bright discrete auroras is located in the region of the low-latitude boundary layer (LLBL) on closed geomagnetic field lines. The estimated LLBL thickness is ∼3 R _e . It has been concluded that the intensity of the dayside red band depends on the solar wind plasma density, whereas the position of the position equatorward boundary depends on the dynamic pressure value and its variations.     

Restoration of information about the interplanetary and solar magnetic fields based on the <Emphasis Type="Italic">aa</Emphasis> index of geomagnetic activity

The method for searching statistical relations between different solar wind parameters and the aa index of geomagnetic activity, which formed the basis for restoring the average annual values of some of these parameters (indicating that the solar coronal magnetic field increased by not more than 10% during the last century), has been proposed.     

Array performances for ambient vibrations on a shallow structure and consequences over <Emphasis Type="Italic">V</Emphasis><Subscript><Emphasis Type="Italic">s</Emphasis></Subscript> inversion

Valuable information about one-dimensional soil structures can be obtained by recording ambient vibrations at the surface, in which the energy contribution of surface waves predominates over the one of other types of waves. The dispersion characteristics of surface waves allow the retrieval of the shear-wave velocity as a function of depth. Microtremor studies are usually divided in two stages: deriving the dispersion (or auto-correlation) curve from the recorded signals and inverting it to obtain the site velocity profile. The possibility to determine the dispersion curve over the adequate frequency range at one site depends on the array aperture and on the wavefield spectra amplitude that can be altered by filtering effects due to the ground structure. Microtremors are usually recorded with several arrays of various apertures to get the spectral curves over a wide frequency band, and different methods also exist for processing the raw signals. With the objective of defining a strategy to achieve reliable results for microtremor on a shallow structure, we analyse synthetic ambient vibrations (vertical component) simulated with 333 broadband sources for a 25-m deep soil layer overlying a bedrock. The first part of our study is focused on the determination of the reliable frequency range of the spectral curves (dispersion or auto-correlation) for a given array geometry. We find that the wavenumber limits deduced from the theoretical array re sponse are good estimates of the valid spectral curve range. In the second part, the spectral curves are calculated with the three most popular noise-processing techniques (frequency–wavenumber, high-resolution frequency–wavenumber and spa tial auto-correlation methods) and inverted indi vidually in each case. The inversions are performed with a tool based on the neighbour hood algorithm that offers a better estimation of the global uncertainties than classical linearised methods, especially if the solution is not unique. Several array apertures are necessary to construct the dispersion (auto-correlation) curves in the appropriate frequency range. Considering the final velocity profiles, the three tested methods are almost equivalent, and no significant advantage was found for one particular method. With the chosen model, all methods exhibit a penetration limited to the bedrock depth, as a consequence of the filtering effect of the ground structure on the vertical component, which was observed in numerous shallow sites.     

Numerical simulation of the <Emphasis Type="Italic">F</Emphasis>2-layer stratification and appearance of the <Emphasis Type="Italic">F</Emphasis>3 and <Emphasis Type="Italic">G</Emphasis> layers in the equatorial ionosphere: The morphology of the phenomena

This work is devoted to a numerical simulation of the equatorial ionosphere, performed using the GSM TIP model completed with a new block for calculating the electric field. It has been indicated that the usage of the wind system calculated according to the MSIS-90 model makes it possible to reproduce the electromagnetic drift velocities at the equator, the effect of the F2-layer stratification, and the appearance of the F3 layer in the equatorial ionosphere. The calculations performed using the modified GSM TIP model made it possible to detect a maximum in the electron density vertical profile at an altitude of ∼1000 km, formed by H⁺ ions, which we called the G layer. If this layer actually exists, it can be observed during sounding the low-latitude ionosphere from satellites during dark time of day.