Comparison of upscaling cropland and non-cropland map using uncertainty weighted majority rule-based and the majority rule-based aggregation methods

Aggregation method is seriously impacted by the landscape characteristics, which has been emphasized due to proportional errors. This research proposed an uncertainty weighted majority rule-based aggregation method (UWMRB) to upscale the cropland/non-cropland map. The Cropland Data Layer for 2016 at 30m resolution, with its corresponding confidence level data, were collected to conduct the experiment using UWMRB and majority rule-based aggregation method. Proportional errors of crop/non-crop were used to assess the accuracy of the two methods. Ordinal logistic regression was used to obtain the probability of an error occurring to predict the uncertainty of both methods. The results show that UWMRB can achieve the lower proportional errors with lower uncertainty. Also, it can reduce the influence of complexity and fragmentation of landscape on aggregation performance. Additionally, the examination of UWMRB provides an important view of application of uncertainty information for upscaling land cover maps in an efficient way.     

遥感反演蒸散发的日尺度扩展方法研究进展

遥感技术能够提供卫星过境时刻地表参量的瞬时值,进而通过模型构建可反演得到瞬时蒸散发。相对于瞬时蒸散发,日尺度蒸散发在实际生产生活中具有更重要的应用价值。本文系统地总结分析了遥感反演瞬时蒸散发的代表性日尺度扩展方法,包括蒸发比不变法、解耦因子不变法、辐射能量比不变法、参考蒸发比不变法、地表阻抗不变法和数据同化法,并对各方法的基本原理、估算精度、适用性等进行了对比分析。在此基础上,进一步综述了日尺度扩展方法存在的不确定性和主要问题,包括扩展方法本身误差、云覆盖、气象数据获取、夜间蒸散发估算、遥感反演同扩展误差累积及真实性检验等,并指出今后应从加强有云天及夜间蒸散发扩展机理和方法等方面的研究来提升瞬时蒸散发日尺度扩展精度。     

Evaluation of digital elevation models for delineation of hydrological response units in a Himalayan watershed

This study reports results from evaluation of the quality of digital elevation model (DEM) from four sources viz. topographic map (1:50,000), Shuttle Radar Topographic Mission (SRTM) (90 m), optical stereo pair from ASTER (15 m) and CARTOSAT (2.5 m) and their use in derivation of hydrological response units (HRUs) in Sitla Rao watershed (North India). The HRUs were derived using water storage capacity and slope to produce surface runoff zones. The DEMs were evaluated on elevation accuracy and representation of morphometric features. The DEM derived from optical stereo pairs (ASTER and CARTOSAT) provided higher vertical accuracies than the SRTM and topographic map-based DEM. The SRTM with a coarse resolution of 90 m provided vertical accuracy but better morphometry compared to topographic map. The HRU maps derived from the fine resolution DEM (ASTER and CARTOSAT) were more detailed but did not provide much advantage for hydrological studies at the scale of Sitla Rao watershed (5800 ha).     

利用能量因子进行DEM升尺度转换精度评价

全面评价数字高程模型（digital elevation model,DEM）升尺度转换方法的精度,有助于合理选择DEM升尺度转换方法,掌握DEM尺度转换规律及构建新的DEM升尺度转换模型。然而目前关于DEM精度评价的研究成果还难以达到实际应用的要求,从全新的视角寻找客观、高效的DEM升尺度转换结果的精度评价方法仍有待研究。基于地球表面接收太阳辐射的分布特性,提出基于能量因子的DEM精度评价方法,应用于不同DEM升尺度转换方法的精度评价中。基于现有的精度评定与质量评价方法,构建定性与定量分析相结合的综合评价方法,以验证基于能量因子的精度评价方法的合理性和有效性。实验结果表明,基于能量因子的精度评价方法原理简单、操作方便,能够反映升尺度转换后DEM地形空间遮蔽关系的变化情况。该方法为DEM升尺度转换结果的精度评价提供了新的思路和方向,对DEM在定量遥感建模与山区地表生态参量反演等方面的应用具有一定的借鉴意义。     

雷达干涉测量技术获取多分辨率山区高程模型

利用一组间隔仅为一天的高分辨雷达卫星COSMO-Skymed影像获取西部某山区4个不同分辨率（4m、10m、20m、50m）的数字高程模型（DEM）。由于西部高山空白区缺乏实测资料,所以以航天飞机雷达地形测绘（SRTM）为参考数字高程模型（DEM）并从其中获取较为可靠的足量地面控制点,从图像中选取高坡度、低坡度、低相干性三个区域,分别从坡度、相干性、分辨率三个方面,比较、分析山区DEM的精度。研究表明：利用合成孔径雷达干涉（InSAR）技术获取的与SRTMDEM基本一致;低坡度区域比高坡度区域的精度更高;相比于低坡度地区,高坡度地区的高程差值对分辨率的变化更为敏感;DEM分辨率越高,与SRTMDEM的差值就越大,与SRTMDEM本身的分辨率较小有关;对于低相干区域,其可靠性有待商榷,即使其50m分辨率的DEM与SRTMDEM也存在较大差距。     

Effect of Contour Intervals and Grid Cell Size on the Accuracy of DEMs and Slope Derivatives

Digital Elevation Models (DEMs) are indispensable tools in many environmental and natural resource applications. DEMs are frequently derived from contour lines. The accuracy of such DEMs depends on different factors. This research investigates the effect of sampling density used to derive contours, vertical interval between contours (spacing), grid cell size of the DEM (resolution), terrain complexity, and spatial filtering on the accuracy of the DEM and the slope derivative. The study indicated different alternatives to achieve an acceptable accuracy depending on the contour interval, the DEM resolution and the complexity of the terrain. The effect of these factors on the accuracy of the DEM and the slope derivative was quantified using models that determine the level of accuracy (RMSE). The implementation of the models will guide users to select the best combination to improve the results in areas with similar topography. For areas with variable terrain complexity, the suggestion is to generate DEMs and slope at a suitable resolution for each terrain separately and then to merge the results to produce one final layer for the whole area. This will provide accurate estimates of elevation and slope, and subsequently improve the analyses that rely on these digital derivatives.     

The Effect of DEM Raster Resolution on First Order, Second Order and Compound Terrain Derivatives

It is well known that the grid cell size of a raster digital elevation model has significant effects on derived terrain variables such as slope, aspect, plan and profile curvature or the wetness index. In this paper the quality of DEMs derived from the interpolation of photogrammetrically derived elevation points in Alberta, Canada, is tested. DEMs with grid cell sizes ranging from 100 to 5 m were interpolated from 100 m regularly spaced elevation points and numerous surface‐specific point elevations using the ANUDEM interpolation method. In order to identify the grid resolution that matches the information content of the source data, three approaches were applied: density analysis of point elevations, an analysis of cumulative frequency distributions using the Kolmogorov‐Smirnov test and the root mean square slope measure. Results reveal that the optimum grid cell size is between 5 and 20 m, depending on terrain com‐plexity and terrain derivative. Terrain variables based on 100 m regularly sampled elevation points are compared to an independent high‐resolution DEM used as a benchmark. Subsequent correlation analysis reveals that only elevation and local slope have a strong positive relationship while all other terrain derivatives are not represented realistically when derived from a coarse DEM. Calculations of root mean square errors and relative root mean square errors further quantify the quality of terrain derivatives.     

DEM空间尺度对岷江上游流域特征提取的影响

DEM分辨率是描述DEM地形精确程度的一个重要指标,同时也是决定DEM使用范围的一个主要影响因素。此处以岷江上游流域为研究区,Arc GIS为技术支撑,分析DEM空间尺度对流域特征提取的影响。首先,采用7组不同分辨率的DEM数据,通过5类不同特征参数的提取来进行DEM尺度效应的定量分析。其次,借鉴坡度中误差法思想和信息熵理论,综合分析高程、坡度和地面粗糙度来确定该地区DEM研究的分辨率合理范围。结论表明:随着DEM栅格大小的不断增大,高程区间和坡度随之减小;地面粗糙度的减小表现出地形的平坦化;信息熵所包含的内容减少;河网总长度和河网密度也随之变短变稀疏。文中岷江上游流域特征提取研究的DEM最佳空间分辨率区间为30~60 m。     

GIS‐based Calibration of MassMov2D

MassMov2D is a numerical model for simulating runout and deposition of landslide phenomena over a complex topography that is implemented in the free GIS PCRaster. This research aims at improving the mechanism of MassMov2D calibration and verifying its capability of representing complex landslides. In this article the authors present the enhancement of the MassMov2D code due to the introduction of the Nash‐Sutcliffe coefficient for model efficiency calculation; this enables the replacement of the inefficient ‘trial and error’ approach used for sensitivity analysis and calibration with a semi‐automatic procedure. During this research the improved code was tested in a case study located on the Canaria Valley (Switzerland) where a complex landslide occurred. An optimal set of parameters were calculated for evaluating the effects of a possible further slope failure. The availability of a unique dataset of high resolution digital elevation models just before and after the collapse allowed precise evaluation of the sensitivity and calibration of the model with the new procedure. The results demonstrate that this model is capable of reproducing the observed deposits even though some model limitations were identified in steep slope areas. Finally the study presents the expected scenario due to a future landslide.     

Gully boundary extraction based on multidirectional hill‐shading from high‐resolution DEMs

The gully boundary, which distinguishes gully from non‐gully areas, is a significant geomorphologic feature for research on gully development and gully erosion. This study presents a new method based on multidirectional hill‐shading maps, which identify the gully (i.e., shadow area) from inter‐gully (i.e., non‐shadow area). These shadows obtained from various illumination azimuths are merged; consequently, the border of the shadows, which is the gully boundary line, can be achieved. In this process, two key parameters, namely, altitude and azimuth of light, affect the accuracy of gully boundary extraction. The experiments in Yaojiawan area of China show that the method of average median slope of all sampling profiles across the gully boundary is effective and practical for light altitude selection. Moreover, the six azimuths are sufficient for gully boundary extraction in a loess hilly area. The application in the Madigou area indicates the replicability and rationality of this method. A comparison with the positive‐negative terrain and slope variation method confirms a higher accuracy of gully boundary extraction by the proposed method in terms of visual interpretation, length, and contour‐matching difference with reference to manually digitalized results. Accuracy assessment indicates that the proposed method is applicable for gully boundary extraction based on high‐resolution DEMs.     

Geomorphometry from unmanned aerial surveys

Unmanned aerial systems (UASs) are widely used for remote sensing, including the production of high‐resolution digital elevation models (DEMs). We study the possibilities of UAS‐based aerial surveys to produce photogrammetrically sound, high‐resolution DEMs intended for geomorphometric modeling. The study was conducted at the Zaoksky testing ground (Russia). To carry out an aerial survey, we used a UAS Geoscan‐101 equipped with a Sony DSC‐RX1 camera and a Topcon GNSS receiver. Aerial photographs were processed using Agisoft PhotoScan Professional software. Applying dense point cloud generation and classification, we produced DEMs with resolutions of 6 cm, 20 cm, and 1 m. Using a universal spectral analytical method, we derived models of several morphometric variables (i.e., slope gradient, horizontal, vertical, minimal, and maximal curvatures) from DEMs with resolutions of 20 cm and 1 m. We found that it is possible to produce noiseless models and well‐readable maps of morphometric variables for grassy areas with separately standing groups of trees and shrubs. However, UAS‐based DEMs cannot be applied for modeling of forested areas: there occur pronounced unrecoverable artifacts due to errors of automated classification of the dense point cloud. Finally, we present recommendations for the production of UAS‐derived, photogrammetrically sound, high‐resolution DEMs intended for geomorphometry.     

基于填挖方分析的DEM精度评价模型

针对DEM高程中误差评价指标的不足,提出了一种基于填挖方分析的DEM精度评价模型以及计算方法,将DEM填挖方误差E_c定义为待评价DEM与参考DEM在同一区域的三维体积差异和与该区域面积之商。探究了DEM填挖方误差和DEM分辨率R以及地形平均坡度S之间的关系,得到DEM填挖方误差的定量估算模型为E_c=0.004 8·R·S。实验表明,模型估算精度达95.85%以上。该模型为在不同地形条件下,确定满足限差要求的DEM分辨率提供了依据。     

Upscaling in situ albedo for validation of coarse scale albedo product over heterogeneous surfaces

ABSTRACT

One of the essential steps for satellite albedo validation is upscaling in situ measurements to corresponding pixel scale over relatively heterogeneous land surfaces. Although the multi-scale validation strategy is applicable for heterogeneous surfaces, the calibration of the high-resolution imagery during upscaling process is never perfect, and thus the upscaling results suffer from errors. The regression-kriging (RK) technique can compensate the calibration part by applying kriging to upscale residuals and produce more accurate upscaling results. In this paper, in situ measurements and high spatial resolution albedo imagery combined with RK technique was proposed. This method is illustrated by upscaling surface albedo from in situ measurements scale to the coarse pixel scale in the core experimental area of HiWATER, where 17 WSN nodes were deployed at heterogeneous area. The upscaling results of this method were compared with the upscaling results from multi-scale strategy. The results show that the upscaling method based on in situ measurements and high-resolution imagery combined with RK technique can capture the spatial characteristics of surface albedo better. Further, an attempt was made to expand this method in time series. Finally, a preliminary validation of the Moderate Resolution Imaging Spectroradiometer albedo product was performed as the tentative application.     

Remote Sensing of Spatial and Temporal Vegetation Dynamics in Hispaniola: A Comparison of Haiti and the Dominican Republic

Abstract

Spatial and temporal vegetation contrasts between the nations of Haiti and the Dominican are analyzed using NDVI data derived from 30m resolution Landsat imagery and 8km resolution AVHRR imagery from the NOAA / NASA Pathfinder database. Analysis of vegetation dynamics in the Hispaniola border region indicates denser vegetation cover and a stronger correlation between elevation, slope, and NDVI on the Dominican side of the frontier. Temporal patterns of NDVI dynamics along the frontier suggest that changes in biomass are both more homogeneous and more extreme on the Haitian side. Analysis of 17 years of 8km resolution AVHRR imagery for the entire island of Hispaniola reveals consistently higher NDVI values for the Dominican Republic and a distinct intra‐annual pattern of mean monthly NDVI deviations that have important implications for future studies of vegetation dynamics in the region.     

Examining the Effect of Ancillary and Derived Geographical Data on Improvement of Per-Pixel Classification Accuracy of Different Landscapes

Effective conservation and management of natural resources requires up-to-date information of the land cover (LC) types and their dynamics. Multi-resolution remote sensing (RS) data coupled with additional ancillary topographical layers (both remotely acquired or derived from ground measurements) with appropriate classification strategies would be more effective in capturing LC dynamics and changes associated with the natural resources. Ancillary information would make the decision boundaries between the LC classes more widely separable, enabling classification with higher accuracy compared to conventional methods of RS data classification. In this work, we ascertain the possibility of improvement in classification accuracy of RS data with the addition of ancillary and derived geographical layers such as vegetation indices, temperature, digital elevation model, aspect, slope and texture, implemented in three different terrains of varying topography—urbanised landscape (Greater Bangalore), forested landscape (Western Ghats) and rugged terrain (Western Himalaya). The study showed that use of additional spatial ancillary and derived information significantly improved the classification accuracy compared to the classification of only original spectral bands. The analysis revealed that in a highly urbanised area with less vegetation cover and contrasting features, inclusion of elevation and texture increased the overall accuracy of IKONOS data classification to 88.72% (3.5% improvement), and inclusion of temperature, NDVI, EVI, elevation, slope, aspect, Panchromatic band along with texture measures, significantly increased the overall accuracy of Landsat ETM+ data classification to 83.15% (7.6% improvement). In a forested landscape with moderate elevation, temperature was useful in improving the overall accuracy by 6.7 to 88.26%, and in a rugged terrain with temperate climate, temperature, EVI, elevation, slope, aspect and Panchromatic band significantly improved the classification accuracy to 89.97% (10.84% improvement) compared to the classification of only original spectral bands, suggesting selection of appropriate ancillary data depending on the terrain.     

面向对象和GURLS结合的高空间分辨率遥感数据云检测

遥感信息获取过程中云是重要的干扰因素,随着国产高空间分辨率卫星数据的应用,实现数据的准确云检测对有效获取地面信息具有重要意义。本文以高分一号、高分二号多光谱影像为数据源,利用图像分割获取了同质对象,基于对象光谱、纹理和几何8种属性特征建立了规则集,以规则集为输入,利用阈值法和GURLS分类器结合进行了云检测。针对不同时相和场景的高分数据,将该方法与基于像素的最大似然法和SVM法进行了对比,结果表明该方法云提取精度均在95%以上,Kappa系数在0.9以上。     

Combined GPS/GLONASS data processing

To obtain the GLONASS satellite position at an epoch other than reference time, the satellite's equation of motion has to be integrated with broadcasting ephemerides. The iterative detecting and repairing method of cycle slips based on triple difference residuals for combined GPS/GLONASS positioning and the iterative ambiguity resolution approach suitable for combined post processing positioning are discussed systematically. Experiments show that millimeter accuracy can be achieved in short baselines with a few hours' dual frequency or even single frequency GPS/GLONASS carrier phase observations, and the precision of dual frequency observations is distinctly higher than that of single frequency observations.     

叶面积指数遥感尺度效应与尺度纠正

由于地表空间异质性的普遍存在,遥感反演模型的非线性必然会导致不同分辨率观测的遥感结果不一致,从而产生遥感产品尺度效应。本文研究了遥感产品尺度效应概念、模拟方法和定量计算模型,并利用锡林浩特草原研究区的实测数据,对尺度效应模型和方法进行了定量计算与验证分析。首先,基于不同升尺度方法与多尺度遥感成像机理之间的机理联系,通过“先反演再平均”与“先平均再反演”之间的差异,可计算“高”分辨率与“低”分辨率之间的遥感产品尺度差异。其次,分别以红光、近红外两波段反射率和归一化植被指数(NDVI)为自变量,对叶面积指数(LAI)非线性遥感模型进行泰勒展开,研究了模型非线性、遥感数据空间异质性对LAI遥感产品尺度差异的影响,发现高阶项可忽略,利用二阶导数项和遥感数据方差项可定量计算遥感产品尺度差异,经过二阶导数项纠正后的尺度差异相对偏差从5.6%分别降低到0.78%和1.45%。最后,分析了LAI遥感产品尺度效应的特征规律,得出以下结论:随着植被覆盖的增大,同等遥感空间异质性的LAI遥感产品尺度差异越大,且红光波段比近红外波段的尺度差异敏感性高近2个数量级;对于绝大部分陆地植被区域,存在“低分辨率低估”尺度效应,且遥感产品尺度差异的主导要素为LAI模型非线性,NDVI变量自身非线性对尺度效应贡献占23.5%;对于湿地类植被与水体混合情形,NDVI变量非线性的贡献为主导贡献,出现“低分辨率高估”尺度效应,必须利用红光、近红外两波段的二阶导数项非线性尺度差异,才能解释这一类型的LAI遥感产品尺度效应。本文建立了具有一定普适意义的遥感产品尺度效应定量模拟与尺度纠正方法,对推动定量遥感的尺度问题研究有一定参考价值。     

利用GOCE卫星轨道数据恢复地球重力场模型方法的分析

欧空局早期公布的时域法和空域法解算的GOCE模型均采用能量守恒法处理轨道数据, 但恢复的长波重力场信号精度较低, 而且GOCE卫星在两极存在数据空白, 利用其观测数据恢复重力场模型是一个不适定问题, 导致解算的模型带谐项精度较低, 需进行正则化处理。本文分析了基于轨道数据恢复重力场模型的方法用于处理GOCE数据的精度, 对最优正则化方法和参数的选择进行研究。利用GOCE卫星2009-11-01—2010-01-31共92 d的精密轨道数据, 采用不依赖先验信息的能量守恒法、短弧积分法和平均加速度法恢复GOCE重力场模型, 利用Tikhonov正则化技术处理病态问题。结果表明, 平均加速度法恢复模型的精度最高, 能量守恒法的精度最低, 短弧积分法的精度稍差于平均加速度法。未来联合处理轨道和梯度数据时, 建议采用平均加速度法或短弧积分法处理轨道数据, 并且轨道数据可有效恢复120阶次左右的模型。Kaula正则化和SOT处理GOCE病态问题的效果最好, 并且两者对应的最优正则化参数基本一致, 但利用正则化技术不能完全抑制极空白问题的影响, 需要联合GRACE等其他数据才能获得理想的结果。     

Object-based urban land cover classification using rule inheritance over very high-resolution multisensor and multitemporal data

Very high spatial and temporal resolution remote sensing data facilitate mapping highly complex and diverse urban environments. This study analyzed and demonstrated the usefulness of combined high-resolution aerial digital images and elevation data, and its processing using object-based image analysis for mapping urban land covers and quantifying buildings. It is observed that mapping heterogeneous features across large urban areas is time consuming and challenging. This study presents and demonstrates an approach for formulating an optimal land cover classification rule set over small representative training urban area image, and its subsequent transfer to the multisensor, multitemporal images. The classification results over the training area showed an overall accuracy of 96%, and the application of rule set to different sensor images of other test areas resulted in reduced accuracies of 91% for the same sensor, 90% and 86% for the different sensors temporal data. The comparison of reference and classified buildings showed ±4% detection errors. Classification through a transferred rule set reduced the classification accuracy by about 5%–10%. However, the trade-off for this accuracy drop was about a 75% reduction in processing time for performing classification in the training area. The factors influencing the classification accuracies were mainly the shadow and temporal changes in the class characteristics.