同步辐射软X射线吸收谱与发射谱测定天然针铁矿能带结构

天然半导体矿物由于成分、缺陷复杂,传统测试方法如紫外可见漫反射等难以准确测定其禁带宽度.本文以针铁矿为例,通过第一性原理计算得到纯针铁矿及掺Al针铁矿的电子结构.计算结果显示,纯针铁矿导带底与价带顶均由Fe3d与O2p轨道组成,而当含杂质Al时,Al2p与O2p发生杂化参与了价带组成.在此基础上,利用同步辐射X射线氧的K边吸收谱与发射谱对纯针铁矿及天然针铁矿的能带结构进行了测定.结果表明,天然含Al的针铁矿禁带宽度为2.30eV,小于纯针铁矿(2.57eV).本研究提供了一种测定天然氧化物矿物禁带宽度的新方法,为深入研究天然半导体可见光催化活性产生机制提供了理论依据.     

Iron local structure in tektites and impact glasses by extended X-ray absorption fine structure and high-resolution X-ray absorption near-edge structure spectroscopy

The local structure of iron in three tektites has been studied by means of Fe K-edge extended X-ray absorption fine structure (EXAFS) and high-resolution X-ray absorption near-edge structure (XANES) spectroscopy in order to provide quantitative data on <Fe-O> distance and Fe coordination number. The samples studied are a moldavite and two australasian tektites. Fe model compounds with known Fe oxidation state and coordination number were used as standards in order to extract structural information from the XANES pre-edge peak. EXAFS-derived grand mean <Fe-O> distances and Fe coordination numbers for the three tektite samples are constant within the estimated error (<Fe-O > =2.00 Å ± 0.02 Å, CN = 4.0 ± 0.4). In contrast to other data from the literature on Fe-bearing silicate glasses, the tektites spectra could not be fitted with a single Fe-O distance, but rather were fit with two independent distances (2 × 1.92 Å and 2 × 2.08 Å). High-resolution XANES spectra of the three tektites display a pre-edge peak whose intensity is intermediate between those of staurolite and grandidierite, thus suggesting a mean coordination number intermediate between 4 and 5. Combining the EXAFS and XANES data for Fe, we infer the mean coordination number to be close to 4.5.Comparison of the tektites XANES spectra with those of a suite of different impact glasses clearly shows that tektites display a relatively narrow range of Fe oxidation state and coordination numbers, whereas impact glasses data span a much wider range of Fe oxidation states (from divalent to trivalent) and coordination numbers (from tetra-coordinated to esa-coordinated). These data suggest that the tektite production process is very similar for all the known strewn fields, whereas impact glasses can experience a wide variety of different temperature-pressure-oxygen fugacity conditions, leading to different Fe local structure in the resulting glasses. These data could be of aid in discriminating between tektite-like impact glasses and impact glasses sensu strictu.     

Arsenic and iron speciation in uranium mine tailings using X-ray absorption spectroscopy

In northern Saskatchewan, Canada, high-grade U ores and the resulting tailings can contain high levels of As. An environmental concern in the U mining industry is the long-term stability of As within tailings management facilities (TMFs) and its potential transfer to the surrounding groundwater. To mitigate this problem, U mill effluents are neutralized with lime to reduce the aqueous concentration of As. This results in the formation of predominantly Fe³⁺–As⁵⁺ secondary mineral phases, which act as solubility controls on the As in the tailings discharged to the TMF. Because the speciation of As in natural systems is critical for determining its long-term environmental fate, characterization of As-bearing mineral phases and complexes within the deposited tailings is required to evaluate its potential transformation, solubility, and long-term stability within the tailings mass. In this study, synchrotron-based bulk X-ray absorption spectroscopy (XAS) was used to study the speciation of As and Fe in mine tailings samples obtained from the Deilmann TMF at Key Lake, Saskatchewan. Comparisons of K-edge X-ray absorption spectra of tailings samples and reference compounds indicate the dominant oxidation states of As and Fe in the mine tailings samples are +5 and +3, respectively, largely reflecting their generation in a highly oxic mill process, deposition in an oxidized environment, and complexation within stable oxic phases. Linear combination fit analyses of the K-edges for the Fe X-ray absorption near edge spectra (XANES) to reference compounds suggest Fe is predominantly present as ferrihydrite with some amount of the primary minerals pyrite (8–15% in some samples) and chalcopyrite (5–15% in some samples). Extended X-ray absorption fine structure (EXAFS) analysis of As K-edge spectra indicates that As⁵⁺ (arsenate) present in tailings samples is adsorbed to the ferrihydrite though an inner-sphere bidentate linkage.     

Molecular environment of iodine in naturally iodinated humic substances: Insight from X-ray absorption spectroscopy

The molecular environment of iodine in reference inorganic and organic compounds, and in dry humic and fulvic acids (HAs and FAs) extracted from subsurface and deep aquifers was probed by iodine L₃-edge X-ray absorption spectroscopy. The X-ray absorption near-edge structure (XANES) of iodine spectra from HAs and FAs resembled those of organic references and displayed structural features consistent with iodine forming covalent bonds with organic molecules. Simulation of XANES spectra by linear combination of reference spectra suggested the predominance of iodine forming covalent bonds to aromatic rings (aromatic-bound iodine). Comparison of extended X-ray absorption fine structure (EXAFS) spectra of reference and samples further showed that iodine was surrounded by carbon shells at distances comparables to those for references containing aromatic-bound iodine. Quantitative analysis of EXAFS spectra indicated that iodine was bound to about one carbon at a distance d (I-C) of 2.01(4)-2.04(9) Å, which was comparable to the distances observed for aromatic-bound iodine in references (1.99(1)-2.07(6) Å), and significantly shorter than that observed for aliphatic-bound iodine (2.15(2)-2.16(2) Å). These results are in agreement with previous conclusions from X-ray photoelectron spectroscopy and from electrospray ionization mass spectrometry. These results collectively suggest that the aromatic-bound iodine is stable in the various aquifers of this study.     

Polarized X-ray absorption spectroscopy of metal ions in minerals

We have made use of the nearly complete linear polarization of synchrotron radiation to study the polarization dependence of X-ray absorption near-edge structure (XANES) and extended fine structure (EXAFS) in oriented single crystals of gillespite (BaFe²⁺ Si₄O₁₀; Fe^{2 +} in square-planar coordination, point symmetry C ₄), anatase (TiO₂; Ti⁴⁺ in octahedral coordination, point symmetry D _2d), and epidote (Ca₂(Al, Fe³⁺)₃SiO₄)₃(OH); Fe³⁺ in distorted octahedral coordination, point symmetry (C _s). For gillespite, the Fe K-XANES spectrum varies strongly with E-vector orientation of the incident X-ray beam. When the E-vector lies in the plane of the FeO₄ group (i.e., perpendicular to the c-axis), multiple-scattering features at 7127 and 7131 eV intensify, whereas when the E-vector is perpendicular to the plane of the FeO₄ group (i.e., parallel to the c-axis), a strongly-polarized 1s to 4p bound state transition occurs at 7116 eV and a localized continuum resonance occurs at 7122 eV. The Fe-K-EXAFS spectrum of gillespite is also highly polarization dependent. When the E-vector is perpendicular to c, all four nearest-neighbor oxygens around Fe²⁺ contribute to the EXAFS signal; when E is parallel to c, the EXAFS signal from nearest-neighbors is reduced by at least 86%. The unpolarized Ti K-XANES spectrum of anatase has three relatively strong pre-edge features at 4967.1, 4969.9, and 4972.7 eV which have resisted definitive interpretation in past studies. The lowest energy feature has a strong xy polarization dependence, suggesting a large amount of 4p _x,y character, and it is also very sharp, indicating a well-defined transition energy. Both of these observations are consistent with an excitonic state with a binding energy of 2.8 eV. The two higher energy features, which are characteristic of octahedrally-coordinated Ti⁴⁺, show little polarization dependence and are probably due to 1s to 3d bound-state transitions, with a small degree of np character in the final state wavefunction. Interpretation of the polarization dependence of Fe K-XANES spectra for epidote is not as straightforward due to the lower space group symmetry (P2₁/m) relative to gillespite (P4/ncc) and anatase (I4₁/amd) and the lower point group symmetry (C _s) of the M(3) site which contains most of the Fe³⁺ in the epidote structure. However, the presence of a shoulder at 7121 eV in the E parallel to b spectrum and its absence in the E normal to bc spectrum are consistent with it being a 1s to 4p _z bound-state transition. Strong, weakly x, y polarized features near 7126 eV in both spectra are most likely due to localized continuum transitions. Also, the 1s to 3d pre-edge intensity varies in intensity with E-vector orientation which is consistent with displacement of Fe³⁺ from the center of the M(3) octahedral site. Analysis of EXAFS spectra of epidote in these two polarizations yields bond distances which are within 0.04 Å of previous single-crystal X-ray diffraction analysis. This study demonstrates the utility of polarized X-ray absorption spectroscopy in quantifying the energies and orbital compositions of final state wavefunctions associated with various X-ray induced transitions in transition-metal containing minerals. It also shows that reasonably accurate M-O distances can be obtained for individual bonds oriented in crystallographically non-equivalent directions.     

漫反射光谱赤铁矿和针铁矿定量研究进展

沉积物-古土壤是记录古环境演化及古气候变迁的有效载体,利用沉积物-古土壤对气候环境信息的记录来研究全球变化问题,已成为当前地球科学研究的热点课题。赤铁矿和针铁矿是沉积物-古土壤中常见的次生矿物,二者含量的变化能有效反映成土过程中冷、暖、干、湿的变化。然而,赤铁矿和针铁矿在沉积物-古土壤中结晶度差且含量低,因此,对二者进行有效定量一直是研究的难题。近年来,漫反射光谱(DRS)分析在沉积物-古土壤中赤铁矿和针铁矿的定量研究中取得了一系列显著的成果。本文系统总结了漫反射光谱在赤铁矿和针铁矿定量中的原理,并对3种常见定量方法及其应用进行归纳,同时对定量过程中存在的问题和发展趋势进行深入讨论。     

High-pressure behaviour of germanate olivines studied by X-ray diffraction and X-ray absorption spectroscopy

Germanate olivines Mg₂GeO₄, Ca₂GeO₄ and CaMgGeO₄ have been studied by high-pressure X-ray Diffraction and high-pressure X-ray Absorption Spectroscopy. The three compounds were compressed, in the 0–30 GPa pressure range, at room temperature in a diamond-anvil cell, silicon oil being used as the pressure transmitting medium. Values of K₀ are 166 ± 15, 117 ± 15 and 152 ± 14 GPa for Mg₂GeO₄, Ca₂GeO₄ and CaMgGeO₄ respectively. These olivines all exhibit compression anisotropy, the a axis being the least compressible. Crystal to crystal phase transitions have been observed in Mg₂GeO₄ and Ca₂GeO₄ above 12 GPa and 6 Gpa respectively. The nature of these structural changes remains unclear yet. The onset of amorphization has been observed in Mg₂GeO₄ and Ca₂GeO₄ at pressures above about 22 and 11 GPa respectively. These phase transitions and amorphization processes do not involve any detectable increase in the coordination number of germanium atoms. At higher pressure (P >23 GPa), we report the onset of a transition from a phase with fourfold coordinated germanium to a phase with higher germanium coordination number in CaMgGeO₄.     

Chemical analysis for optimal synthesis of ferrihydrite-modified diatomite using soft X-ray absorption near-edge structure spectroscopy

Effects of process parameters such as concentrations of FeCl₂, NaOH, and drying temperature on the formation mechanism and chemical characteristics of ferrihydrite-modified diatomite are studied by using X-ray absorption near-edge structure spectroscopy. The spectra were recorded in total electron yield mode and/or fluorescence yield mode to investigate the chemical nature of Fe and Si on the surface and/or in the bulk of ferrihydrite-modified diatomite, respectively. It was found that only the surface SiO₂ was partially dissolved in the NaOH solution with stirring and heating, whereas the bulk of diatomite seemed to be preserved. The dissolved Si was incorporated into the structure of ferrihydrite to form the 2-line Si-containing ferrihydrite on the surface of diatomite. The crystalline degree of ferrihydrite increased with the increasing FeCl₂ concentration and the Brunauer–Emmett–Teller specific surface area of ferrihydrite-modified diatomite decreased with the increasing FeCl₂ concentration. The crystalline degree of ferrihydrite decreased with the increase of NaOH concentration. The high temperature calcination caused an energy shift in the Si L-edge spectra to the high energy side and a transformation of Si-containing ferrihydrite to crystallized hematite might occur when ferrihydrite-modified diatomite is calcined at 900°C. In this study, the optimal synthesis conditions for the ferrihydrite-modified diatomite with the least crystalline Si-containing ferrihydrite and the highest surface area were found to be as the follows: 0.5 M FeCl₂ solution, 6 M NaOH solution and drying temperature of 50°C.     

Experimental and theoretical study of the structural environment of magnesium in minerals and silicate glasses using X-ray absorption near-edge structure

X-ray absorption spectroscopy at the Mg K-edge is used to obtain information on magnesium environment in minerals, silicate and alumino-silicate glasses. First-principles XANES calculations are performed for minerals using a plane-wave density functional formalism with core-hole effects treated in a supercell approach. The good agreement obtained between experimental and theoretical spectra provides useful information to interpret the spectral features. With the help of calculation, the position of the first peak of XANES spectra is related to both coordination and polyhedron distortion changes. In alumino-silicate glasses, magnesium is found to be mainly 5-fold coordinated to oxygen whatever the aluminum saturation index value. In silicate glasses, magnesium coordination increases from 4 in Cs-, Rb- and K-bearing glasses to 5 in Na- and Li-bearing glasses but remains equal as the polymerization degree of the glass varies. The variation of the C feature (position and intensity) is strongly related to the alkali type providing information on the medium range order.

Coprecipitation of chromate with calcite: Batch experiments and X-ray absorption spectroscopy

Batch experiments, combined with in situ spectroscopic methods, are used to examine the coprecipitation of Cr(VI) with calcite, including partitioning behavior, site-specific distribution of Cr on the surface of calcite single crystals, and local coordination of Cr(VI) in the calcite structure. It is found that the concentration of Cr incorporated in calcite increases with increasing Cr concentration in solution. The calculated apparent partition coefficient, , is highest at low Cr solution concentration, and decreases to a constant value with increasing Cr solution concentration. DIC images of the surface of calcite single crystals grown in the presence of exhibit well-defined growth hillocks composed of two pairs of symmetrically nonequivalent vicinal faces, denoted as + and −, which reflect the orientation of structurally nonequivalent growth steps. Micro-XRF mapping of the Cr distribution over a growth hillock shows preferential incorporation of Cr into the—steps, which is considered to result from differences in surface structure geometry. XANES spectra confirm that incorporated Cr is hexavalent, and no reduction of Cr(VI) in the X-ray beam was observed up to 2 days at room temperature. EXAFS fit results show the incorporated Cr(VI) has the expected first shell of 4 O at ∼1.64 ± 0.01 Å, consistent with . Best fit results show that the second shell is split with ∼2.5 Ca at ∼3.33 ± 0.05 and ∼2.2 Ca at ∼3.55 ± 0.05 Å, which confirms the incorporation of chromate into calcite. Consideration of possible local coordination indicates that significant distortion or disruption is required to accommodate in the calcite structure.     

Sulfur K- and L-edge X-ray absorption spectroscopy of sphalerite,chalcopyrite and stannite

Sulfur K-edge x-ray absorption spectra (XANES and EXAFS) and L-edge XANES of sphalerite (ZnS), chalcopyrite (CuFeS₂) and stannite (Cu₂FeSnS₄) have been recorded using synchrotron radiation. The K- and L-edge XANES features are interpreted using a qualitative MO/energy band structure model. The densities of unoccupied states at the conduction bands of sphalerite, chalcopyrite and stannite are determined using S K- and L-edge XANES features (up to 15 eV above the edge), combined with published metal K-edge XANES. The SK- and L-edge XANES also indicate that, for sphalerite, the Fe²⁺ 3d band at the fundamental gap has little or no bonding hybridization with S 3p and S 3s orbitals; for chalcopyrite, the Cu⁺ 3d and Fe³⁺ 3d bands have strong mixing with S 3p and S 3s states, while for stannite the Cu⁺ 3d band strongly hybridizes with S 3p and S 3s orbitals, but the Fe²⁺ 3d band does not. The post-edge XANES features (15–50 eV above the edge) of sphalerite, chalcopyrite and stannite are similar. These features are related to the tetrahedral coordination of sulfur in all these structures, and interpreted by a multiple scattering model. The resonance energies from both the K-edge and L-edge XANES for these minerals are well correlated with reciprocal interatomic distances and lattice spaces. Sulfur K-edge EXAFS analyses using Fourier transform and curve fitting procedures are presented. Comparison of the structural parameters from EXAFS with x-ray structure data shows that the first shell bond distances (BD) from EXAFS are usually accurate to ±0.02 Å, and that coordination numbers (CN) are generally accurate to ±20 percent. For sphalerite, EXAFS analysis yields the structure parameters for the first three neighbour shells around a sulfur atom; the BD and CN even for the third shell are in close agreement with the x-ray structure, and the Debye-Waller term decreases from the first shell to the third shell. It is shown that sphalerite (ZnS) is a good model compound for EXAFS analysis of sulfur in chalcogenide glasses and metalloproteins.     

Structure and specification of iron complexes in aqueous solutions determined by X-ray absorption spectroscopy

X-ray absorption spectroscopy, including extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) techniques, have been used to determine the structure and speciation of complexes for Fe²⁺ and Fe³⁺ chloride solutions at a variety of pH's, ionic strengths, and chloride/iron ratios.Low intensity K-edge transition features and analysis of modified pair correlation functions, derived from Fourier transformation of EXAFS spectra, show a regular octahedral coordination of Fe(II) by water molecules with a first-shell Fe²⁺-O bond distance, closely matching octahedral Fe²⁺-O bonds obtained from solid oxide model compounds. Solution Fe²⁺-O bond distances decrease with chloride/iron ratio, pH, and total FeCl₂ concentration. A slight intensification of the $\text{1s → 3d}$ transition with increasing FeCl₂ concentration suggests that chloride may begin to mix with water as a nearest-neighbor octahedral ligand. Fe³⁺ solutions show a pronounced increase in the $\text{1s → 3d}$ transition intensities between 1.0 M FeCl₃/7.8 M Cl^? to 1.0 M FeCl₃/ 15 M Cl^?, indicating a coordination change from octahedral to tetrahedral complexes. EXAFS analyses of these solutions show an increase in first-shell Fe³⁺-ligand distances despite this apparent reduction in coordination number. This can be best explained by a change from regular octahedral complexes of ferric iron (either Fe(H₂O)₆³⁺ or trans-Fe(H₂O)₄Cl₂ or both; Fe³⁺-O bond distances of 2.10 Å) to tetra-chloro complexes [Fe³⁺-Cl bond distances of 2.25 Å].     

Experimental study of germanium adsorption on goethite and germanium coprecipitation with iron hydroxide: X-ray absorption fine structure and macroscopic characterization

Adsorption of germanium on goethite was studied at 25 °C in batch reactors as a function of pH (1-12), germanium concentration in solution (10⁻⁷ to 0.002 M) and solid/solution ratio (1.8-17 g/L). The maximal surface site density determined via Ge adsorption experiments at pH from 6 to 10 is equal to 2.5 ± 0.1 μmol/m². The percentage of adsorbed Ge increases with pH at pH < 9, reaches a maximum at pH ∼ 9 and slightly decreases when pH is further increased to 11. These results allowed generation of a 2-pK Surface Complexation Model (SCM) which implies a constant capacitance of the electric double layer and postulates the presence of two Ge complexes, and , at the goethite-solution interface. Coprecipitation of Ge with iron oxy(hydr)oxides formed during Fe(II) oxidation by atmospheric oxygen or by Fe(III) hydrolysis in neutral solutions led to high Ge incorporations in solid with maximal Ge/Fe molar ratio close to 0.5. The molar Ge/Fe ratio in precipitated solid is proportional to that in the initial solution according to the equation (Ge/Fe)_solid = k × (Ge/Fe)_solution with 0.7 ? k ? 1.0. The structure of adsorbed and coprecipitated Ge complexes was further characterized using XAFS spectroscopy. In agreement with previous data on oxyanions adsorption on goethite, bi-dentate bi-nuclear surface complexes composed of tetrahedrally coordinated Ge attached to the corners of two adjacent Fe octahedra represent the dominant contribution to the EXAFS signal. Coprecipitated samples with Ge/Fe molar ratios >0.1, and samples not aged in solution (<1 day) having intermediate Ge/Fe ratios (0.01-0.1) show 4 ± 0.3 oxygen atoms at 1.76 ± 0.01 Å around Ge. Samples less concentrated in Ge (0.001 < Ge/Fe < 0.10) and aged longer times in solution (up to 280 days) exhibit a splitting of the first atomic shell with Ge in both tetrahedral (R = 1.77 ± 0.02 Å) and octahedral (R = 1.92 ± 0.03 Å) coordination with oxygen. In these samples, octahedrally coordinated Ge accounts for up to ∼20% of the total Ge. For the least concentrated samples (Ge/Fe < 0.001-0.0001) containing lepidocrocite, 30-50% of total co-precipitated germanium substitutes for Fe in octahedral sites with the next-nearest environment dominated by edge-sharing GeO₆-FeO₆ linkages (R_Ge-Fe ∼ 3.06 Å). It follows from the results of our study that the largest structural change of Ge (from tetrahedral to octahedral environment) occurs during its coprecipitation with Fe hydroxide at Ge/Fe molar ratio ?0.0001. These conditions are likely to be met in many superficial aquatic environments at the contact of anoxic groundwaters with surficial oxygenated solutions. Adsorption and coprecipitation of Ge with solid Fe oxy(hydr)oxides and organo-mineral colloids and its consequence for Ge/Si fractionation and Ge geochemical cycle are discussed.     

The oxidation state of sulfur in synthetic and natural glasses determined by X-ray absorption spectroscopy

Sulfur K-edge X-ray absorption near edge structure (XANES) spectra were recorded for experimental glasses of various compositions prepared at different oxygen fugacities (fO₂) in one-atmosphere gas-mixing experiments at 1400 °C. This sample preparation method only results in measurable S concentrations under either relatively reduced (log fO₂ < −9) or oxidised (log fO₂ > −2) conditions. The XANES spectra of the reduced samples are characterised by an absorption edge crest at 2476.4 eV, typical of S²⁻. In addition, spectra of Fe-bearing compositions exhibit a pronounced absorption edge shoulder. Spectra for all the Fe-free samples are essentially identical, as are the spectra for the Fe-bearing compositions, despite significant compositional variability within each group. The presence of a sulfide phase, such as might exsolve on cooling, can be inferred from a pre-edge feature at 2470.5 eV.The XANES spectra of the oxidised samples are characterised by an intense transition at 2482.1 eV, typical of the sulfate anion SO₄²⁻. Sulfite (SO₃²⁻) has negligible solubility in silicate melts at low pressures. The previous identification of sulfite species in natural glass samples is attributed to an artefact of the analysis (photoreduction of S⁶⁺). S⁴⁺ does, however, occur unambiguously with S⁶⁺ in Fe-free and Fe-poor compositions prepared in equilibrium with CaSO₄ at 4-16 kbar, and when buffered with Re/ReO₂ at 10 kbar. Solubility of S⁴⁺ thus requires partial pressures of SO₂ considerably in excess of 1 bar. A number of experiments were undertaken in an attempt to access intermediate fO₂s more applicable to terrestrial volcanism. Although these were largely unsuccessful, S²⁻ and S⁶⁺ were found to coexist in some samples that were not in equilibrium with the imposed fO₂.The XANES spectra of natural olivine-hosted melt inclusions and submarine glasses representative of basalts at, or close to, sulfide saturation show mainly dissolved S²⁻, but with minor sulfate, and additionally a peak at 2469.5 eV, which, although presumably due to immiscible sulfide, is 1 eV lower than that typical of FeS. These sulfate and sulfide-related peaks disappear with homogenisation of the inclusions by heating to 1200 °C followed by rapid quenching, suggesting that both these features are a result of cooling under natural conditions. The presence of small amounts of sulfate in otherwise reduced basaltic magmas may be explained by the electron exchange reaction: S²⁻ + 8Fe³⁺ = S⁶⁺ + 8Fe²⁺, which is expected to proceed strongly to the right with decreasing temperature. This reaction would explain why S²⁻ and S⁶⁺ are frequently found together despite the very limited fO₂ range over which they are thermodynamically predicted to coexist. The S XANES spectra of water-rich, highly oxidised, basaltic inclusions hosted in olivine from Etna and Stromboli confirm that nearly all S is dissolved as sulfate, explaining their relatively high S contents.     

A study of speciation of Sb in bisulfide solutions by X-ray absorption spectroscopy.

Direct evidence of the structure of thioantimonide species in alkaline aqueous solutions is provided by X-ray absorption spectroscopy. Twenty solutions containing thioantimonide species were prepared by dissolving stibnite (Sb₂S₃) in deoxygenated aqueous NaHS solutions; the solution pH range was 8–14, the [Sb_tot] 1–100 mM and the [HS⁻] 0.009–2.5 M. The structural environment of the dissolved Sb was determined by EXAFS analysis of the Sb K-edge over the temperature range 80–473 K.Many of the solutions contain a species with Sb bonded to four S atoms at 2.34 Å, consistent with the presence of a [Sb(V)S₄³⁻] species, demonstrating that oxidation of Sb(III) to Sb(V) has occurred on dissolution. There is evidence that the complementary reduced phase is H₂. In three solutions, the Sb has three nearest neighbor S atoms and two of these solutions have an additional S shell of two atoms at 2.9Å, with one showing evidence of an Sb shell at 4.15 Å. This provides evidence of the presence of multimeric Sb(V) thioantimonide species. Analysis of several solutions reveals the presence of a species with three Sb–S interactions of 2.41–2.42 Å, supporting the presence of a Sb(III) species such as Sb₂S₂(SH)₂. Six solutions have S coordination numbers from 2.7–4 Å and Sb–S distances of 2.37–2.39 Å, and are likely to contain mixtures of at least two species in concentrations such that each make a significant contribution to the EXAFS. There was no clear relationship between either [Sb_tot] or [HS⁻] and the type of species present, but Sb(III) species were only present in the solutions with high pH. The effect of temperature was most significant in one solution, where at 423 K partial hydrolysis occurred and the presence of a species such as Sb₂S₂(OH)₂, with an Sb–O distance of 1.91 Å, is indicated.The study provides new information on the coordination environment of thioantimonide species, complementary to previous studies and provides a basis for a better understanding of Sb speciation in aqueous solutions found in hydrothermal systems, anoxic basins and man-made, high pH environments. In particular it demonstrates the need for Sb(V) to be considered in theoretical and experimental studies of such systems. However, more definitive interpretation of some of the data is inhibited by the presence of mixtures of species and the lack of information on the outer coordination shells that would confirm the presence of multimeric species.     

An X-ray absorption spectroscopy study of the structure and reversibility of copper adsorbed to montmorillonite clay

X-ray absorption spectroscopy (XAS) and adsorption-desorption measurements have been performed to assess the relationship between the structure and reversibility of copper complexes on montmorillonite clay. By varying the solution pH and background electrolyte concentration, the adsorption of copper on either the edge sites or permanent charge sites of montmorillonite was controlled. This allowed the structure and reversibility of copper complexes on each of these site types to be assessed independently of each other. XAS analysis of copper adsorbed on the permanent charge sites indicated outer-sphere surface complexes, with these complexes showing sorption reversibility. For copper complexes formed on the edge sites of montmorillonite, XAS data confirmed the presence of monomer and dimer copper surface complexes. Sorption irreversibility at edge sites was noted at copper coverages less than 20 μmoles/g clay at pH=4.2 and at coverages greater than 50 μmoles/g clay at pH=6.8. At pH=6.8, higher Cu-Cu coordination numbers indicated the copper sorption irreversibility may be due, in part, to the formation of dimer surface complexes. The coordination numbers at pH=4.2 indicated the irreversibility could be due to the formation of dimers or due to formation of surface complexes on high energy edge sites.     

Crystal chemistry of iron in natural grandidierites: an X-ray absorption fine-structure spectroscopy study

 Fe–K edge XAFS spectra (pre-edge, XANES and EXAFS) were collected for eight grandidierites from Madagascar and Zimbabwe, as well as for Fe(II) and Fe(III) model compounds (staurolite, siderite, enstatite, berlinite, yoderite, acmite, and andradite). The pre-edge spectra for these samples are consistent with dominantly 5-coordinated ferrous iron. The analysis of the XANES and EXAFS spectra confirms that Fe(II) substitutes for Mg(II) in grandidierite, with a slight expansion of the local structure around Mg by ∼2%. In addition, ferric iron was also detected in some samples [5–10 mol% of the total Fe or 500–1100 ppm Fe(III)]. Based on theoretical calculations of the EXAFS region, Fe(III) appears to be located in the 5-coordinated sites of Mg(II) or in the most distorted 6-coordinated sites of Al (depending on the sample studied). Special attention is therefore required when using grandidierite as a model for ferrous iron in C_3v geometry, because of the possible presence of an extra contribution related to Fe(III). This additional contribution enhances significantly the Fe–K pre-edge integrated area [+40% for 1000 ppm Fe(III)]. Therefore, only a few grandidierite samples can be used as a robust structural model for the study of the Fe(II) coordination in glasses and melts. Received: 26 June 2000 / Accepted: 19 February 2001     

X-ray absorption spectroscopy study on the effect of hydroxybenzoic acids on the formation and structure of ferrihydrite

Organic ligands are known to interfere with the polymerization of Fe(III), but the extent of interference has not been systematically studied as a function of structural ligand properties. This study examines how the number and position of phenol groups in hydroxybenzoic acids affect both ferrihydrite formation and its local (<5 Å) Fe coordination. To this end, acid Fe(III) nitrate solutions were neutralized up to pH 6.0 in the presence of 4-hydroxybenzoic acid (4HB), 2,4-dihydroxybenzoic acid (2,4DHB), and the hydroquinone 3,4-dihydroxybenzoic acid (3,4DHB). The initial molar ligand/Fe ratios ranged from 0 to 0.6. The precipitates were dialyzed, lyophilized, and subsequently studied by X-ray absorption spectroscopy and synchrotron X-ray diffraction. The solids contained up to 32 wt.% organic C (4HB ∼ 2,4DHB < 3,4DHB). Only precipitates formed in 3,4DHB solutions comprised considerable amounts of Fe(II) (Fe(II)/Fe_tot ≤ 6 mol%), implying the abiotic mineralization of the catechol-group bearing ligand during Fe(III) hydrolysis under oxic conditions. Hydroxybenzoic acids decreased ferrihydrite formation in the order 4HB ∼ 2,4DHB ? 3,4DHB, which documents that phenol group position rather than the number of phenol groups controls the ligand’s interaction with Fe(III). The coordination numbers of edge- and double corner-sharing Fe in the precipitates decreased by up to 100%. Linear combination fitting (LCF) of Fe K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra revealed that this decrease was due to increasing amounts of organic Fe(III) complexes in the precipitates. Although EXAFS derived coordination numbers of Fe in ferrihydrite remained constant within error, all organic ligands decreased the coherently scattering domain (CSD) size of ferrihydrite as indicated by synchrotron X-ray diffraction analysis (4HB < 2,4DHB ? 3,4DHB). With decreasing particle size of ferrihydrite its Fe(O,OH)₆ octahedra became progressively distorted as evidenced by an increasing loss of centrosymmetry of the Fe sites. Pre-edge peak analysis of the Fe K-edge XANES spectra in conjunction with LCF results implied that ferrihydrite contains on an average 13 ± 3% tetrahedral Fe(III), which is in very good agreement with the revised single-phase structural model of ferrihydrite (Michel, F. M., Barron, V., Torrent, J., Morales, M. P. et al. (2010) Ordered ferrimagnetic form of ferrihydrite reveals links among structure, composition, and magnetism. Proc. Natl. Acad. Sci. USA107, 2787-2792). The results suggest that hydroxybenzoic acid moieties of natural organic matter (NOM) effectively suppress ferrihydrite precipitation as they kinetically control the availability of inorganic Fe(III) species for nucleation and/or polymerization reactions. As a consequence, NOM can trigger the formation of small ferrihydrite nanoparticles with increased structural strain. These factors may eventually enhance the biogeochemical reactivity of ferrihydrite formed in NOM-rich environments. This study highlights the role of hydroquinone structures of NOM for Fe complexation, polymerization, and redox speciation.     

Periodic density functional theory calculations of bulk and the (010) surface of goethite

Background  

Goethite is a common and reactive mineral in the environment. The transport of contaminants and anaerobic respiration of microbes are significantly affected by adsorption and reduction reactions involving goethite. An understanding of the mineral-water interface of goethite is critical for determining the molecular-scale mechanisms of adsorption and reduction reactions. In this study, periodic density functional theory (DFT) calculations were performed on the mineral goethite and its (010) surface, using the Vienna Ab Initio Simulation Package (VASP).