Subglacial clast behaviour and its implication for till fabric development: new results derived from wireless subglacial probe experiments

This study has investigated the three-dimensional movement of clasts within deformation till, using embedded wireless probes. These probes were part of an environmental sensor network, which measured subglacial properties (temperature, water pressure, resistivity, case strain and tilt) six times a day, and relayed that data via radio to the glacier surface, where they were forwarded and broadcast on-line. The system was installed at Briksdalsbreen, Norway and operated from August 2004 until August 2006. Approximately 2000 probe days worth of data were collected, with an increase in performance (41% more readings) during the second year. The probes showed similar patterns of water pressure rises throughout the two years, but with slightly different magnitudes and timings. These changes in water pressure could be related to clast behaviour. The probes decreased their dip over the year, and the rate of change was related to an increase in glacier velocity. After initial changes in dip, the probes experienced changes in orientation, followed by rotation about the a-axis. This continuous rotation was similar to the motion suggested by Jeffery [1922. The motion of ellipsoidal particles immersed in a viscous fluid. Proceedings of the Royal Society of London, Series A 102, 161–179] for the behaviour of clasts within a viscous material. In addition, some probes also showed short, frequent dip oscillations in spring and autumn, which were interpreted to reflect stick-slip events, similar to lodging; and demonstrated how local conditions can interrupt the predicted rotation pattern.Overall, it is demonstrated that when water pressures were high, decoupling occurred associated with basal sliding and dip oscillations; and when water pressures fell, the ice and sediment were coupled and till deformation occurred. These events happened during summer and autumn. It is this combination of “lodgement” and deformation that builds up both a complex (but predictable) fabric and a resultant composite till sedimentology.     

Deforming bed conditions on the Dánischer Wohld Peninsula, northern Germany

At the Dänischer Wohld Peninsula coastal sections (North West Germany), subglacial deformation was found at three scales. At the smallest scale, features typical of deforming bed tills were found, i.e. small boudins, tectonic laminations and low fabric strength till. At an intermediate scale, large lenses of glaciolacustrine sediments were found within subglacially deformed till. At the largest scale, there were large (over 5 m high) subglacial folds. We suggest that these styles of sedimentation/deformation were associated with a series of readvances during overall glacial retreat: subglacial deformation occurred during each advance and glaciolacus trine sedimentation occurred during each retreat. This led to glaciolacustrine sediments and deforming bed tills being folded together during subsequent readvances. Where the rheology was relatively weak, the lacustrine sediments were totally incorporated into the diamicton and lost their previous identity. However, where the glaciolacustrine sediments were relatively strong, they survived. We suggest that this style of deformation is typical of the conditions just upglacier from the ice margin and is associated with a relatively thick deforming layer and a high input of subglacial sediment. We conclude that the evidence found at this site provides further indications that the southern margins of the Fenno-Scandinavian ice sheet were coupled with the glacier bed and underwent deforming bed conditions.     

Till and moraine emplacement in a deforming bed surge - an example from a marine environment

The glacier Sefstrombreen in Spitsbergen surged across an arm of the sea between 1882 and 1886 and rode up onto the island Coraholmen. Marine and terrestrial geological observations and archive records show that the glacier advanced on a deforming carpet of marine mud which was eroded from its original location, transported, and smeared over the sea bed and Coraholmen as a deformation till. The glacier emplaced about 210⁸M³ (0.2 km³) of drift in the terminal 2 km of its advance in a maximum of 14 years, leaving a thickness of up to 20 m on Coraholmen, which was doubled in size as a result.During the surge, subglacial muds were characterised by high water pressures, low effective pressures and low frictional resistance to glacier movement. Original sedimentary inhomogenities permit fold structures to be identified, but repeated refolding and progressive remoulding produce mixing and homogenisation of deformation tills.The surge was probably shortlived, and as the heavily crevassed glacier stagnated, underlying water saturated muds were intruded into crevasses and then extruded on the glacier surface. Reticulate “crevasse-intrusion” ridges on Coraholmen and the sea floor reflect the orientation of surge generated crevasses. Water and sediment was also extruded beyond the glacier at its maximum extent, to form extensive flows producing “till tongues” both on Coraholmen and the sea floor extending over 1.3 km from the glacier.It is argued that subglacial deformation of pre-existing sediment will almost invariably be associated with glaciation of marine areas and that this process will not only produce deformation tills through remoulding of pre-existing sediments, but will also play a fundamental role in glacier dynamics. Criteria which permit glacial tills produced by such events from marine and glaciomarine muds are discussed.     

Microsedimentology of ice stream tills from the Eastern Alps,Austria – a new perspective on till microstructures

This study of tills from the Eastern Alps, Austria, illustrates the insights obtained using microsedimentology on subglacial tills in the context of palaeogeographical reconstructions of glacier advances. Investigations of several sites with tills derived from both local glaciers and the ice‐sheet streaming of the Inn Glacier during the Last Glacial Maximum and its termination reveal a detailed picture of subglacial sedimentology that provides evidence of soft sediment subglacial deformation under polythermal conditions. All the tills exhibit microstructures that are proxy evidence of significant changes in till rheology. The tills originate from multiple sources, incorporating older tills and other deposits picked up by the subglacial deformation within a polythermal but dominantly warm temperate subglacial thermal regime. The analyses of till microstructures reveal a direct relationship between basal ice strain conditions and their development. A hypothesis is derived, from the various microstructures observed in these Austrian tills formed under soft sediment deforming basal ice conditions, that suggests that with basal thermal changes and fluctuations in clay content, pore‐water content and pressure, microstructures form in a non‐random manner. It is postulated that in clay‐deficient sediments, edge‐to‐edge events are most likely to occur first; and where clay content increases, grain stacks, rotation structures, deformation bands and, finally, shear zones are likely to evolve in an approximate sequential manner. After repeated transport, emplacement, reworking and, probably, further shearing and deformation events, an emplaced ‘till’, as observed in these Austrian tills, will form that carries most, if not all of these microstructures, in varying percentages. Finally, the impact of the Inn Glacier Ice Stream on these tills is not easily detected and/or differentiated, but indications of high pore water and probable dilatant events leading to reductions in the number of edge‐to‐edge events point to the impact of fast or thick ice upon these subglacial tills.     

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).     

Lobal interactions and rheologic superposition in subglacial till near Bradtville, Ontario, Canada

Structural, stratigraphic, and lithologic data from a section 69 m long of Catfish Creek drift (north shore of Lake Erie) tell a complex story of two competing glacial lobes. Stone surface features and orientations indicate that stones rotated in viscously deforming, fine-medium textured subglacial till prior to final emplacement. Fractures, shears, and attenuated sediment lenses in tills reveal that they experienced some brittle shear superposed on ductile shear during till dewatering and stiffening. The Huron-Georgian Bay lobe advanced first from the northwest, deforming interstadial sediments and depositing subglacial till. Next, southward confluent flow of the Huron, Georgian Bay, and Erie lobes carved subglacial troughs into sediments and deposited (then deformed) bouldery deformation till by squeeze flow. The northwest flowing Erie lobe then prevailed, depositing deformation till, subglacial aquatic sediments, and mudflows. Finally, a pavement-bearing, hybrid deformation-lodgement till covered the section. Till formation was mainly by subglacial viscous flow with minor lodgement superposed as water content decreased and some fines were probably winnowed. This implies that till deformation probably accounted for much of the glacier movement. Therefore, rapid ice flow could have occurred over the section, along the southern margin of the Laurentide Ice Sheet.     

Tectonic processes in a surge-type glacier

The 1982–1983 surge of Variegated Glacier involved the development, growth and downglacier propagation of a velocity peak associated with rapid basal sliding facilitated by high subglacial water pressures. Passage of the velocity peak through the glacier was preceded by an episode of longitudinal shortening and followed by an episode of elongation. The deformation history of the glacier ice was dependent upon location relative to the surge nucleus and the final position reached by the propagating velocity peak. Ice above the surge nucleus experienced continuous and cumulative elongation; ice below the final position of the velocity peak experienced continuous and cumulative shortening; ice between these two points experienced shortening followed by elongation and low cumulative strain. The large-scale pattern of ice structure development reflects these deformation histories. Surging is equivalent to thrust sheet emplacement by a combination of gravity gliding over a weakened basal layer and ‘push from behind’, with the gravity-driven motion of the surging part of the glacier providing the push which allows the surge front to propagate. The relationships established between the deformation history of surging glaciers and the development of ice structures may facilitate the interpretation of structures in thrust sheets.     

Fluid-pressure controlled soft-bed deformation sequence beneath the surging Breiðamerkurjökull (Iceland, Little Ice Age)

The general subject of this paper is subglacial deformation beneath Breiðamerkurjökull, a surging Icelandic glacier. More specifically it discusses the evolution and the role of fluid pressure on the behaviour of subglacial sediments during deformation. During Little Ice Age maximum, the two outcrops studied, North Jökulsarlon (N-Jk) and Brennhola-Alda (BA), were located at 2550 m and 550 m respectively from the front of the Breiðamerkurjökull. Sedimentological analysis at the forefield of the glacier shows thick, coarse glaciofluvial deposits interbedded with thin, fine-grained shallow lacustrine/swamp deposits, overlain by a deformed till unit at N-Jk. BA outcrop shows fine-grained shallow lacustrine/swamp deposits overlain by a deformed till unit. The sequence of deformation events from one outcrop to the other is similar. First, major thrust planes, which were rooted in shallow lacustrine/swamp deposits developed by glacially induced simple shear. Next, the thrusts were folded, indicating the deformation of hydroplastic sediment assisted by moderate fluid pressure. Then clastic dyke swarms crosscut the sedimentary succession, proving that fluid overpressure caused hydrofracturing associated with fluidisation. Finally, as water escaped from the glacier bed, fluid pressure dropped, and normal faulting occurred in brittle-state subglacial sediments. Fluid-pressure variations are related to glacier dynamics. They control the deformation sequence by modifying subglacial rheological behaviour and the nature of the subglacial tectonism.     

Microstructural analyses of a Middle Pliocene till from the James Bay Lowlands,Canada—evidence of “potential” fast ice streaming

Sediment from the Attawapiskat area near James Bay, Northern Ontario was sampled for micromorphological analyses. The sediment is a glacial diamicton (till) of subglacial origin. The till contains entrained and scavenged sediments of proglacial and/or subglacial glaciofluvial/glaciolacustrine origin from a subglacial deforming layer that was emplaced due to both stress reduction and/or porewater dissipation. Evidence of porewater escape, clay translocation and other microstructures all point to emplacement under active subglacial bed deformation. The limited number of edge to edge (ee) grain crushing events, however, point to lower stress levels than might anticipated under a thin fast ice lobe of the James Bay during the Middle Pliocene. Microstructures of Pleistocene tills were quantitatively compared with the Attawapiskat till and the limited number of ee events at Attawapiskat further highlighted that grain to grain contact was curtailed possibly due to high till porosity, high porewater pressures and low strain rates or alternatively due to a high clay matrix component reducing grain crushing contact events. It is suggested that this Middle Pliocene till may be indicative of sediments emplaced under ice lobe surging conditions or fast ice stream subglacial environments. This proposal has significant implications for the glaciodynamics of this part of the Middle Pliocene James Bay lobe. This research highlights a crucial link between subglacial conditions, till microstructural analyses and glaciodynamics.     

Surge dynamics of Aavatsmarkbreen,Svalbard, inferred from the geomorphological record

This study investigated the surge dynamics of Aavatsmarkbreen, a glacier in Svalbard and its geomorphological impact based on remote sensing data and field observations. The main objective was to analyse and classify subglacial and supraglacial landforms in the context of glacial deformation and basal sliding over a thin layer of thawed, water‐saturated deposits. The study also focused on the geomorphological evidence of surge‐related sub‐ and supraglacial crevassing and glacier front fracturing. From 2006 to 2013, the average recession of Aavatsmarkbreen was 363 m (52 m a⁻¹). A subsequent surge during 2013–2015 resulted in a substantial advance of the glacier front of over 1 km and an increase in its surface area of more than 2 km². The surface of Aavatsmarkbreen was severely fractured. Significant ice‐flow acceleration was noted whereby the highest surface velocity reached 4.9 m day⁻¹. The ephemeral water‐escape structures and mini‐flutings on the fine‐grained till surface that formed during the surge are indicative of high subglacial pore‐water pressure and enhanced basal sliding. Two genetic types of clast pavements occur in the marginal zone of Aavatsmarkbreen. The results of this study will help to constrain glaciological and geomorphological processes involved in surge phenomena. Understanding the scale and effects of these processes provides insight into the behaviour of fast‐flowing glaciers and ice streams and reveals their relationships with external factors.     

Fluted moraine formation and till genesis below a temperate valley glacier: Slettmarkbreen, Jotunheimen, southern Norway

Clast fabric and morphological data have been used to determine the origin of fluted subglacial tills exposed by recent retreat of the Slettmarkbreen glacier, Norway. A new method for the interpretation of clast fabric data allows aspects of the strain and depositional history of the till to be reconstructed. The till formed by a combination of lodgement and subsole deformation by slip along discrete shear planes. Lodgement was dominant for the larger size fractions (>125 mm), while the smaller material was more susceptible to deformation. The fluted till surface reflects the tendency for the till matrix to deform into regions of low confining pressure in the lee of lodged boulders. Downglacier components of till flow are thought to have resulted in significant sediment transfer towards the margin.     

Subglacial drainage by groundwater-channel coupling,and the origin of esker systems: Part 1—glaciological observations

OverallThis work is presented in two parts. Part I presents observations on the coupling between subglacial channel flow and groundwater flow in determining subglacial hydraulic regime and creating eskers from an Icelandic glacier that is suggested as an analogue for many parts of Pleistocene ice sheets. Part II develops a theory of perennial subglacial stream flow and the origin of esker systems, and models the evolution of the subglacial stream system and associated groundwater flow in a glacier of the type described in Part I. It is suggested that groundwater flow may be the predominant mechanism whereby meltwater at the glacier bed finds its way to the major subglacial streams that discharge water to glacier margins.Part IBoreholes drilled through an Icelandic glacier into an underlying till and aquifer system have been used to measure variations in head in the vicinity of a perennial subglacial stream tunnel during late summer and early winter. They reveal a subglacial groundwater catchment that is drained by a subglacial stream along its axis. The stream tunnel is characterised by low water pressures, and acts as a drain for the groundwater catchment, so that groundwater flow is predominantly transverse to ice flow, towards the channel.These perennial streams flow both in summer and winter. Their portals have lain along the same axes for the 5 km of retreat that has occurred since the end of the Little Ice Age, 100 years ago, suggesting that the groundwater catchments have been relatively stable for at least this period. In the winter season, stream discharges are largely derived from basal melting, but during summer, water derived from the glacier surface finds its way, via fractures and moulins, to the glacier bed, where it dominates the meltwater flux. Additional subglacial streams are created in summer to help drain this greater flux from beneath the glacier, through poorly integrated and unstable networks. Summer streams cease to flow during winter and tend not to form in the same places in the following summer. Perennial streams are the stable component of the system and are the main sources of extensive esker systems.Strong flow of groundwater towards low-pressure areas along channels and the ice margin is a source of major upwelling that can produce sediment liquefaction and instability. A theory is developed to show how this could have a major effect on subglacial sedimentary processes.     

Reconstructing past glacier dynamics and erosion from glacial geomorphic evidence: Snowdon,North Wales

Bedrock surfaces exposed around Llyn Llydaw, North Wales demonstrate contrasting styles of erosion beneath a Late Devensian ice sheet and a Loch Lomond Stadial (LLS) valley glacier. Ice sheet erosion involved lee-side fracturing, surface fracture wear and abrasive wear, while LLS erosion was primarily by abrasive wear. Preservation of ice sheet erosional features indicates limited rates of erosion during the LLS. Analysis of the geometry and distribution of erosional markings suggests that the low erosional capacity of the LLS glacier was due to a low basal sliding velocity. This prevented the formation of lee-side cavities, reduced the debris flux over the bed and minimised particle-bed contact loads. Reconstructions of the mass balance and geometry of the LLS glacier indicate that most of its balance velocity could be achieved by internal deformation alone. A combination of low subglacial water pressures and an unusually rough substrate explain the low sliding velocities. High bed roughness is due to the absence of leeside cavities and a change in flow orientation between ice sheet and LLS times, which meant that the LLS glacier was in contact with roughness elements which were generated in cavities beneath the ice sheet.     

Fabric signature of subglacial till deformation, Breidamerkurjökull, Iceland

The foreland of Breidamerkurjökull, Iceland, is the only locality where tills known to have undergone subglacial deformation are exposed. Till on the foreland has a two-tiered structure, consisting of a dilatant upper horizon c 0.5 m thick and a compact lower till; these horizons correspond to the ductile deforming A horizon and the brittle-ductile B horizon observed below the glacier by G. S. Boulton and co-workers. The relationship between known strain history and a variety of macrofabric elements is examined for these two genetic facies of deformation till. The upper horizon exhibits variable a-axis fabrics and abundant evidence for clast re-alignment, reflecting ductile flow and rapid clast response to transient strains. In contrast, the lower horizon has consistently well organized a-axis fabrics with a narrow range of dip values, recording clast rotation into parallel with strain axes during brittle or brittle-ductile shear. The data indicate that till strain history imparts identifiable macrofabric signatures, providing important analogues to guide the interpretation of Pleistocene tills.     

Formation of subglacial till under transient bed conditions: deposition, deformation, and basal decoupling under a Weichselian ice sheet lobe, central Poland

A multi-proxy approach involving a study of sediment architecture, grain size, grain roundness and crushing index, petrographic and clay mineral composition, till fabric and till micromorphology was applied to infer processes of till formation and deformation under a Weichselian ice sheet at Kurzetnik, Poland. The succession consists of three superposed till units overlying outwash sediments deformed at the top. The textural characteristics of tills vary little throughout the till thickness, whereas structural appearance is diversified including massive and bedded regions. Indicators of intergranular bed deformation include overturned, attenuated folds, boudinage structures, a sediment-mixing zone, grain crushing, microstructural lineations, grain stacking and high fabric strength. Lodgement proxies are grooved intra-till surfaces, ploughing marks and consistently striated clast surfaces. Basal decoupling by pressurized meltwater is indicated by undisturbed sand stringers, sand-filled meltwater scours under pebbles and partly armoured till pellets. It is suggested that the till experienced multiple transitions between lodgement, deformation and basal decoupling. Cumulative strain was high, but the depth of (time-transgressive) deformation much lower (centimetre range) than the entire till thickness ( ca 2 m) at any point in time, consistent with the deforming bed mosaic model. Throughout most of ice overriding, porewater pressure was high, in the vicinity of glacier floatation pressure indicating that the substratum, consisting of 11 m thick sand, was unable to drain subglacial meltwater sufficiently.     

North Atlantic climate impact on early late‐glacial climate oscillations in the south‐eastern Alps inferred from a multi‐proxy lake sediment record

High‐resolution multi‐proxy analyses of a sediment core section from Lake Jeserzersee (Saissersee) in the piedmont lobe of the Würmian Drau glacier (Carinthia, Austria) reveal pronounced climatic oscillations during the early late glacial (ca. 18.5–16.0k cal a BP). Diatom‐inferred epilimnetic summer water temperatures show a close correspondence with temperature reconstructions from the adjacent Lake Längsee record and, on a hemispheric scale, with fluctuations of ice‐rafted debris in the North Atlantic. This suggests that North Atlantic climate triggered summer climate variability in the Alps during the early late glacial. The expansion of pine (mainly dwarf pine) between ca. 18.5 and 18.1k cal a BP indicates warming during the so‐called ‘Längsee oscillation’. The subsequent stepwise climate deterioration between ca. 18.1 and 17.6k cal a BP culminated in a tripartite cold period between ca. 17.6 and 16.9k cal a BP with diatom‐inferred summer water temperatures 8.5–10 °C below modern values and a shift from wet to dry conditions. This period probably coincides with a major Alpine glacier advance termed the Gschnitz stadial. A warmer interval between ca. 16.9 and 16.4k cal a BP separates this cold phase from a second, shorter and less pronounced cold phase between ca. 16.4 and 16.0k cal a BP, which is thought to correlate with the Clavadel/Senders glacier advance in the Alps. The following temperature increase, coupled with wet (probably snow‐rich) conditions, caused the expansion of birch during the transition period to the late glacial interstadial. Copyright © 2011 John Wiley & Sons, Ltd.     

Formation of submarginal and proglacial end moraines: implications of ice‐flow mechanism during the 1963–64 surge of Brúarjökull,Iceland

The morphology, sedimentology and architecture of an end moraine formed by a ～9 km surge of Brúarjökull in 1963–64 are described and related to ice‐marginal conditions at surge termination. Field observations and accurate mapping using digital elevation models and high‐resolution aerial photographs recorded at surge termination and after the surge show that commonly the surge end moraine was positioned underneath the glacier snout by the termination of the surge. Ground‐penetrating radar profiles and sedimentological data reveal 4–5 m thick deformed sediments consisting of a top layer of till overlying gravel and fine‐grained sediments, and structural geological investigations show that the end moraine is dominated by thrust sheets. A sequential model explaining the formation of submarginal end moraines is proposed. The hydraulic conductivity of the bed had a major influence on the subglacial drainage efficiency and associated porewater pressure at the end of the surge, thereby affecting the rates of subglacial deformation. High porewater pressure in the till decreased its shear strength and raised its strain rate, while low porewater pressure in the underlying gravel had the opposite effect, such that the gravel deformed more slowly than the till. The principal velocity component was therefore located within the till, allowing the glacier to override the gravel thrust sheets that constitute the end moraine. The model suggests that the processes responsible for the formation of submarginal end moraines are different from those operating during the formation of proglacial end moraines.     

Macro‐ and micro‐sedimentology of a modern melt‐out till – Matanuska Glacier,Alaska, USA

The macro‐ and micro‐sedimentology of a supraglacial melt‐out till forming at the Matanuska Glacier was examined in relationship to the properties of the stratified basal zone ice and debris from which it is originating. In situ melting of the basal ice has produced a laminated to bedded diamicton consisting mainly of silt. Macroscopic properties include: discontinuous laminae and beds; lenses of sand, silt aggregates and open‐work gravel; deformed and elongate clasts of clay; widely dispersed pebbles and cobbles, those that are prolate usually with their long axes subparallel to parallel to the bedding. Evidence for deformation is absent except for localized bending of beds over or under rock clasts. Microscopic properties are a unique element of this work and include: discontinuous lineations; silt to granule size laminae; prolate coarse sand and rock fragments commonly with their long axis subparallel to bedding; subangular to subrounded irregular shaped clay clasts often appearing as bands; sorted and unsorted silt to granule size horizons, sometimes disrupted by pore‐water pathways. Limited deformation occurs around rock clasts and thicker parts of lamina. This study shows that in situ melting of debris‐rich basal ice can produce a laminated and bedded diamicton that inherits and thereby preserves stratified basal ice properties. Production and preservation of supraglacial melt‐out till require in situ melting of a stagnant, debris‐rich basal ice source with a low relief surface that becomes buried by a thick, stable, insulating cover of ice‐marginal sediment. Also required are a slow melt rate and adequate drainage to minimize pore‐water pressures in the till and overlying sediment cover to maintain stability and uninterrupted deposition. Many modern and ancient hummocky moraines down glacier of subglacial overdeepenings probably meet these process criteria and their common occurrence suggests that both modern and pre‐modern supraglacial melt‐out tills may be more common than previously thought.     

Structures and textures in till indicating subglacial deposition

Five structural and textural features are discussed: (1) small lenses of sorted material, (2) smudges, (3) small-scale deformations of till matrix and smudges by clasts, (4) clasts consistently striated, and (5) clasts with stoss-and-lee sides. Analyses suggest that these features may be produced by subglacial processes acting in the ice-bed interface. Long axes of small sand lenses and smudges as well as the striation on the upper surface of scattered clasts in lodgement till have a strong preferred orientation in good agreement with the glacier flow direction as indicated by clast fabrics, bedrock striation, and surface fluting of ground moraine. When in traction against the till bed, clasts may plough up till banks. Clasts with stoss-and-lee sides development were also very distinctly oriented as their stoss sides faced significantly up-glacier.
It is concluded (1) that each of the five features discussed is useful as a criterion for subglacial deposition by lodgement, (2) that they indicate important differential movement along the ice-bed interface and therefore suggest a temperate regime in this part of the glacier during the till deposition, (3) that very few orientation measurements of one or more of these features signify the ice movement direction; i.e. a time-saving method to find the paleoflow direction of Pleistocene glaciers, and (4) that taken together with till preconsolidation, mechanical composition, and clast fabric, they may support each other and give good indications of the genesis of Pleistocene tills.     

Grundmoräne versus Schlammoräne— two types of lodgement till in the Alpine Foreland of Switzerland

In the Aare River Valley between Berne and Thoune a mud till unit occurs together with lacustrine sediments in a complex relationship. The high content of fine material in the mud till is due to incorporation of lake sediments by the advancing Aare glacier probably during the most extensive glaciation of the Swiss Alps. Special attention is given to the evolution of the grain size parameters in vertical sequences in sections at Raintalwald and Räbli. The trend of vertical variation of the parameters reflects the origin of the mud till. Ground moraine and mud till may both be lodgement till but are texturally quite distinct, and the incorporation of pre-existing sediments in the mud till is clearly demonstrated by the use of the grain size parameters.