珠江口盆地大地热流特征及其与热岩石圈厚度的关系

沉积盆地现今热流特征是岩石圈构造-热演化过程的综合反映和盆地热史恢复的必要约束条件,其总体变化趋势与热岩石圈厚度密切相关.本文根据新收集的珠江口盆地19口钻井温度数据,新增计算了19个大地热流数据,其中12个数据位于深水区（水深大于300 m）,丰富了该盆地深水区钻井地热数据.结合前人研究成果,绘制了该盆地的大地热流图,并分析了其热流分布特征.在此基础上通过求解一维热传导方程,计算得到36口井位处的热岩石圈厚度,量化了盆地大地热流与热岩石圈厚度间的关系.结果显示,珠江口盆地大地热流值介于24.2~121.0 mW·m^-2,平均71.8±13.6 mW·m^-2,新增盆地深水区钻井平均热流值高达84.5±4.4 mW·m^-2.大地热流分布整体上从陆架区到陆坡区升高,而热岩石圈厚度整体分布趋势与大地热流相反.大地热流与热岩石圈厚度间存在良好的指数相关性.     

北京南口—孙河断裂带水热系统特征与成因分析

中低温对流型地热资源在华北地区广泛分布,是一种清洁的替代能源.与活动断裂带相关的水热型地热资源是中低温地热系统的重要组成部分.本文基于高精度重力测量、微动测深及钻孔温度测量等数据,从热源、通道、储层和盖层四个方面探讨了南口—孙河断裂带水热系统特征.低重力异常揭示的燕山期花岗二长岩、闪长岩岩体范围为23.8 km~2和14.3 km~2,放射性测井数据计算得到其生热率均值为3.14μW·m~(-3),侏罗系火山岩生热率均值为1.65μW·m~(-3),隐伏岩体和火山岩均难以构成地热系统的附加热源.重力异常显示南口—孙河断裂带宽度约500~800 m,断裂带切割蓟县系雾迷山组白云岩热储层.钻井温度曲线显示断裂带内水热活动强烈,说明该断裂带是导水、导热的重要通道.断裂带南西侧马池口一带第四系松散层与侏罗系火山岩形成了热储盖层,微动测深显示火山岩最大厚度约1500 m.综上源、通、储、盖四个要素分析,该地热系统为热传导一对流复合型,来自京西北山区的大气降水经远距离径流深循环吸收地层热量后沿南口—孙河断裂上移到达裂隙发育的白云岩地层中形成热水.总之,沿南口—孙河断裂带具备了良好的地热地质条件,可达到规模开采的条件.     

Aquifer Vulnerability Assessment Based on Sequence Stratigraphic and 39Ar Transport Modeling

A large‐scale groundwater flow and transport model is developed for a deep‐seated (100 to 300 m below ground surface) sedimentary aquifer system. The model is based on a three‐dimensional (3D) hydrostratigraphic model, building on a sequence stratigraphic approach. The flow model is calibrated against observations of hydraulic head and stream discharge while the credibility of the transport model is evaluated against measurements of ³⁹Ar from deep wells using alternative parameterizations of dispersivity and effective porosity. The directly simulated 3D mean age distributions and vertical fluxes are used to visualize the two‐dimensional (2D)/3D age and flux distribution along transects and at the top plane of individual aquifers. The simulation results are used to assess the vulnerability of the aquifer system that generally has been assumed to be protected by thick overlaying clayey units and therefore proposed as future reservoirs for drinking water supply. The results indicate that on a regional scale these deep‐seated aquifers are not as protected from modern surface water contamination as expected because significant leakage to the deeper aquifers occurs. The complex distribution of local and intermediate groundwater flow systems controlled by the distribution of the river network as well as the topographical variation (Tóth 1963) provides the possibility for modern water to be found in even the deepest aquifers.     

Detecting the flow relationships between deep and shallow aquifers in an exploited groundwater system,using long‐term monitoring data and quantitative hydrogeology: the Acque Albule basin case (Rome,Italy)

Five years of hydrogeological monitoring and field activities performed in the complex hydrogeological system of the Acque Albule basin (AAB) were conducted to define the hydrogeological setting, the relationship between deep and shallow aquifers and a conceptual groundwater flow model of this exploited area using conventional quantitative techniques. The basin, which is located close to Rome (Italy) on the west side of the Apennine chain and just north of the Colli Albani volcano, subsided after development of a north–south fault system (about 115 000 y bp). The AAB experiences intense hydrothermal activity, which has produced a large travertine deposit (80‐m thick). The travertine deposit constitutes a fractured aquifer that is the final destination of more than 5 m³ s^‐1 of water and is strongly dewatered by quarry activities. The complex hydrogeology of this basin was investigated, revealing two main hydraulically connected aquifers, one thermalised and partly confined into the limestone bedrock and one unconfined in the travertine. The two aquifers are separated by a non‐continuous clayey aquiclude. The hydrogeological survey and geological characterisation contributed to the development of the groundwater flow conceptual model. Analysis and comparison of the monitored levels highlighted the pattern of flow between the deep and shallow parts of the flow system. Copyright © 2012 John Wiley & Sons, Ltd.     

Heat flow and ground water flow in the Great Plains of the United States

Regional groundwater flow in deep aquifers adds advective components to the surface heat flow over extensive areas within the Great Plains province. The regional groundwater flow is driven by topographically controlled piezometric surfaces for confined aquifers that recharge either at high elevations on the western edge of the province or from subcrop contacts. The aquifers discharge at lower elevations to the east. The assymetrical geometry for the Denver and Kennedy Basins is such that the surface areas of aquifer recharge are small compared to the areas of discharge. Consequently, positive advective heat flow occurs over most of the province. The advective component of heat flow in the Denver Basin is on the order of 15 mW m⁻² along a zone about 50 km wide that parallels the structure contours of the Dakota aquifer on the eastern margin of the Basin. The advective component of heat flow in the Kennedy Basin is on the order of 20 mW m⁻² and occurs over an extensive area that coincides with the discharge areas of the Madison (Mississippian) and Dakota (Cretaceous) aquifers. Groundwater flow in Paleozoic and Mesozoic aquifers in the Williston Basin causes thermal anomalies that are seen in geothermal gradient data and in oil well temperature data. The pervasive nature of advective heat flow components in the Great Plains tends to mask the heat flow structure of the crust, and only heat flow data from holes drilled into the crystalline basement can be used for tectonic heat flow studies.     

Numerical modeling of geothermal groundwater flow in karst aquifer system in eastern Weibei,Shaanxi Province,China

The quantitative assessment of geothermal water resources is important to the exploitation and utilization of geothermal resources. In the geothermal water systems the density of groundwater changes with the temperature, therefore the variations in hydraulic heads and temperatures are very complicated. A three-dimensional density-dependent model coupling the groundwater flow and heat transport is established and used to simulate the geothermal water flow in the karst aquifers in eastern Weibei, Shaanxi Province, China. The multilayered karst aquifer system in the study area is cut by some major faults which control the regional groundwater flow. In order to calibrate and simulate the effect of the major faults, each fault is discretized as a belt of elements with special hydrological parameters in the numerical model. The groundwater dating data are used to be integrated with the groundwater flow pattern and calibrate the model. Simulation results show that the calculated hydraulic heads and temperature fit with the observed data well.

     

Numerical modeling of geothermal groundwater flow in karst aquifer system in eastern Weibei,Shaanxi Province,China

The quantitative assessment of geothermal water resources is important to the exploitation and utilization of geothermal resources. In the geothermal water systems the density of groundwater changes with the temperature, therefore the variations in hydraulic heads and temperatures are very complicated. A three-dimensional density-dependent model coupling the groundwater flow and heat transport is established and used to simulate the geothermal water flow in the karst aquifers in eastern Weibei, Shaanxi Province, China. The multilayered karst aquifer system in the study area is cut by some major faults which control the regional groundwater flow. In order to calibrate and simulate the effect of the major faults, each fault is discretized as a belt of elements with special hydrological parameters in the numerical model. The groundwater dating data are used to be integrated with the groundwater flow pattern and calibrate the model. Simulation results show that the calculated hydraulic heads and temperature fit with the observed data well.     

Numerical modeling of geothermal groundwater flow in karst aquifer system in eastern Weibei, Shaanxi Province, China

The quantitative assessment of geothermal water resources is important to the exploitation and utilization of geothermal resources. In the geothermal water systems the density of groundwater changes with the temperature, therefore the variations in hydraulic heads and temperatures are very complicated. A three-dimensional density-dependent model coupling the groundwater flow and heat transport is established and used to simulate the geothermal water flow in the karst aquifers in eastern Weibei, Shaanxi Province, China. The multilayered karst aquifer system in the study area is cut by some major faults which control the regional groundwater flow. In order to calibrate and simulate the effect of the major faults, each fault is discretized as a belt of elements with special hydrological parameters in the numerical model. The groundwater dating data are used to be integrated with the groundwater flow pattern and calibrate the model. Simulation results show that the calculated hydraulic heads and temperature fit with the observed data well.     

Estimation of vertical water and heat fluxes in the semi-confined aquifers in tokyo metropolitan area,japan

Groundwater circulation is known to be one of the agents responsible for the redistribution of geothermal energy by acting as a source or sink in the course of its movement through porous media. Heat transport in groundwater systems is considered to be a coupled process and the theory based on this was used to analyse temperature profiles of 30 thermally stable observation wells in a deep, semi-confined aquifer system in the Tokyo Metropolitan area. Vertical water fluxes in the semi-confined aquifers and the associated upward heat fluxes were estimated from a heat flux equation that describes convection and conduction processes of heat transport in one dimension. The vertical downward water fluxes in Shitamachi lowland, Musashino and Tachikawa terraces were 0.69.26.91 × 10^?9, 1.46-70.92 × 10^?9 and 2.61.2204 × 10^?9 m/s, respectively. A vertical upward water flux of 1.80-33.60 × 10^?9 m/s was estimated in Shitamachi lowland. The water flux generally decreased with increasing depth for observation wells which intercepted more than one semi-confining layer. The estimated upward heat fluxes for Shitamachi lowland, Musashino and Tachikawa terraces were 0.32-1.12, 0.49-1.21 and 1.00-11.62 W/m², respectively. The heat flux was highest in Tachikawa terrace where a major fault, the Tachikawa fault, is located. Generally, the estimated heat flux was higher in the semi-confining layers than in the aquifers. Areas with heat sources and sinks as well as groundwater flow patterns in the semi-confined aquifers were revealed by heat flux and temperature distributions in the study area.     

Thermal structure and energy of the Hakone volcano,Japan

The thermal energy balance and the temperature profile of the Hakone volcano are considered quantitatively. Across the Hakone volcano and its surroundings the heat flow values vary from 10^–1 to 10³ mW/m², due to thermal conduction and mass flow involving volcanic steam and hot spring discharge. An area with extremely low heat flow is observed in the western side of the caldera showing the presence of percolating meteoric water. The hydrothermal activity is intense in the eastern half of the caldera.The total heat discharge from the high temperature zone (discharge area) of the Hakone volcano amounts to 11.0×10⁷ W. The magmatic steam energy discharge is 95.0×10⁶ W. The thermal energy by redistribution of the terrestrial heat flow by the lateral deep ground water flow is calculated to be 9.00×10⁶ W. For the model having the vertical vent in the volcano's central part up to 1 km depth below the ground surface from a magma reservoir the computed temperature distribution is consistent with the observed values. The depth of the magma reservoir is 7 km below the ground surface and the diameter is 5 km.     

A Waste Treatment/Disposal Site Evaluation Process for Areas Underlain by Carbonate Aquifers

Fractured carbonate or karst aquifers are highly susceptible to contamination. In Minnesota, the areas underlain by karst aquifers are often characterized by thin soil cover, poorly cased wells and/or collapse features. When coupled with improper land use decisions these aquifers have become extensively contaminated.
Evaluation of existing or potentially contaminated sites has required development of unique site evaluation techniques or combinations of techniques. Shallow geophysics have been used successfully to determine subsurface karst features, pinpoint locations for additional investigations and evaluate pump-test data. Soil texture, density and relative moisture content have been closely examined and criteria established to evaluate subsurface erosion susceptibility. Percent rock core recovery, mechanical response of drilling and drilling fluid loss have been used to characterize the secondary porosity and potential contamination susceptibility of the carbonate rock. Dye tracing via surface sinks and well injection have determined primary flow paths and have been useful in estimating flow times.
These techniques used solely or in conjunction have been very useful in evaluating contamination existing in the aquifers and as a predictive tool to evaluate the proposed land uses impacts.     

Geothermal data analysis at the high-temperature hydrothermal area in Western Sichuan

The western Sichuan hydrothermal area is located at the northeastern margin of the eastern syntaxis of the Qinghai-Tibet Plateau, which is also the eastern end of the Mediterranean-Himalayan geothermal activity zone. There are 248 warm or hot springs in this area, and 11 have temperatures beyond the local boiling temperature. Most of these hot springs are distributed along the Jinshajiang, Dege-Xiangcheng, Ganzi-Litang, and Xianshuihe faults, forming a NW-SE hydrothermal belt. A geothermal analysis of this high-temperature hydrothermal area is an important basis for understanding the deep geodynamic process of the eastern syntaxis of the Qinghai-Tibet Plateau. In addition, this study offers an a priori view to utilize geothermal resources, which is important in both scientific research and application. We use gravity, magnetic, seismic, and helium isotope data to analyze the crust-mantle heat flow ratio and deep geothermal structure. The results show that the background terrestrial heat flow descends from southwest to northeast. The crustal heat ratio is not more than 60%. The high temperature hydrothermal active is related to crustal dynamics processes. Along the Batang-Litang-Kangding line, the Moho depth increases eastward, which is consistent with the changing Qc/Qm(crustal/mantle heat flow) ratio trend. The geoid in the hydrothermal zone is 4–6 km higher than the surroundings, forming a local "platform". The NW-SE striking local tensile stress zone and uplift structure in the upper and middle crust corresponds with the surface hydrothermal active zone. There is an average Curie Point Depth(CPD) of 19.5–22.5 km in Batang, Litang, and Kangding. The local shear-wave(S-wave) velocity is relatively low in the middle and lower crust. The S-wave shows a low velocity trap(Vs3.2 km s.1) at 15–30 km, which is considered a high-temperature partial melting magma, the crustal source of the hydrothermal active zone. We conclude that the hydrothermal system in this area can be divided into Batang-type and Kangding-type, both of which rely on a crustal heating cycle of atmospheric precipitation and surface water along the fracture zone. The heat is derived from the middle and lower crust: groundwater penetrates the deep faults bringing geothermal energy back to the surface and forming high-temperature springs.     

Chemical and isotopic changes in the hydrology of the tauhara geothermal field due to exploitation at wairakei

Depressurisation of the Tauhara field due to massive withdrawal of deep chloride water from the adjacent Wairakei field for geothermal power has caused considerably hydrological and chemical changes at Tauhara. In the undisturbed state (1962), deep chloride water discharged as hot and boiling dilute chloride springs on the east and west flanks of the field (the Terrace and Spa areas, respectively), while steam from the two-phase zone of the deep system produced by absorption into near-surface groundwater, steam-heated sulphatebicarbonate waters and by mixing with chloride water, chloride-sulphate waters. By 1978–1981 the chloride waters had stopped discharging on the western flank, the steam flow towards the surface had greatly increased (by 5–10 fold) increasing the volume and temperature of the steam-heated waters, but the dilute chloride waters of the Terrace area had changed very little. Silica concentrations in the near-surface waters appear to be controlled by the solubility of amorphous silica, which is present in the surface zone rocks (e.g., Taupo pumice breccias). The increased steam flow led to enrichment in the ¹³O and D contents of the steam-heated waters by loss of secondary steam and enlargement of the area and intensity of steaming ground, the latter accompanied by hydrothermal eruptions in 1974 and 1981. Generation of the steam-heated waters has been modelled using mass, heat and isotope balances. The model is consistent with observed heat and cold groundwater flows and requires that a large proportion of the heat from adsorbed primary steam is released as secondary steam. Tritium contents show that the steam-heated waters have a mean residence time of 50–100 years. In the future, invasion of the deep system by cooler surface waters may reduce steam flow and lower surface aquifer temperatures.     

Thermal Influence of an Alpine Deep Hydrothermal Fault on the Surrounding Rocks

Major fault zones in mountain areas are often associated with cold‐water circulations and hydrothermal pathways. Compared with the massif as a whole, the deep groundwater flows in these high hydraulic‐conductivity zones modify the thermal state of the surrounding rock. This paper examines the thermal effects of groundwater flow in the area around the steeply dipping La Léchère deep fault zone (LFZ, French Alps) and associated shallow decompressed zone. We used a 3D numerical model drawn up from groundwater circulation data to investigate the La Léchère hydrothermal system and the thermal state of the rock in the valley sides. Hydrothermal simulations showed that convective flow into the LFZ cools the valley sides and creates a thermal upwelling under the valley floor. An unsteady thermal regime that continues for about 10,000 years is also needed to obtain the temperatures currently found under the valley floor in the LFZ. Temperature‐depth profiles around the LFZ show disturbances in the thermal gradients in the valley sides and the valley floor. Convective heat transfer into the LFZ and the decompressed zone, and conductive heat transfer in the surrounding rocks produce an unsteady, asymmetric thermal state in the rock on both sides of the LFZ.     

Heat flow on the Pacific-Antarctic Ridge

Twenty-four heat flow measurements are clustered in 5–20 m.y. and 60–80 m.y. old seafloor on the crest and northern flank of the Pacific-Antarctic Ridge. The crestal heat flow stations are characterized by (1) low mean heat flow relative to that predicted by theoretical models, (2) thin sediment cover, and (3) high ratio of standard deviation to mean heat flow, all of which indicate a system dominated by convective heat transfer. The measurements made on older seafloor of the northern flank have (1) mean heat flow equal to the theoretical predictions of conductively-cooling lithospheric plate models, (2) thick sediment cover, and (3) low ratio of standard deviation to mean heat flow. Thus convective loss associated with hydrothermal circulation is not considered to be important in 60–80 m.y. old seafloor on the Pacific-Antarctic Ridge. The pattern of heat flow on this ridge is thus similar to that in the Atlantic, Indian and Pacific Oceans: hydrothermal circulation is dominant on the ridge crest but is suppressed on the flanks, possibly due to a difference in the hydraulic admittance of the sediment between the two regions.     

Distinguishing Mountain Front and Mountain Block Recharge in an Intermontane Basin of the Himalayan Region

Intermontane basin aquifers worldwide, particularly in the Himalayan region, are recharged largely by the adjoining mountains. Recharge in these basins can occur either by water infiltrating from streams near mountain fronts (MFs) as mountain front recharge (MFR) or by sub-surface mountain block infiltration as mountain block recharge (MBR). MFR and MBR recharge are challenging to distinguish and are least quantified, considering the lack of extensive understanding of the hydrological processes in the mountains. This study used oxygen and hydrogen isotopes (δ¹⁸O and δ²H), electrical conductivity (EC) data, hydraulic head, and groundwater level data to differentiate MFR and MBR. Groundwater level data provide information about the groundwater-surface water interactions and groundwater flow directions, whereas isotopes and EC data are used to distinguish and quantify different recharge sources. The present methodology is tested in an intermontane basin of the Himalayan region. The results suggest that karst springs (KS) and deep groundwater (DGW) recharge are dominated by snowmelt (47% ± 10% and 46% ± 9%) as MBR from adjacent mountains, insignificantly affected by evaporation. The hydraulic head data and isotopes indicate Quaternary shallow groundwater (SGW) aquifer system recharge as MFR of local meteoric water with significant evaporation. The results indicate several flow paths in the aquifer system, a local flow for KS, intermediate flow for SGW, and regional flow for DGW. The findings will significantly impact water resource management in the area and provide vital baseline knowledge for sustainable groundwater management in other Himalayan intermontane basins.     

Heat flow and ground water movement in the Bohemian cretaceous basin (Czechoslovakia)

Sub-surface temperature fields may be considerably affected by active ground water systems, thereby seriously hampering the interpretation of heat flow data. Quantitative evaluation of the convective component of heat transfer is thus very important in cases such as large sedimentary basins with vast underground water circulation. We propose in this study a simple model of horizontal aquifer. This model was used to examine the effect of the lateral convection on the surface heat flow near the recharge zone of basinal margins. The perturbation of the heat flow field above the aquifer was calculated for various aquifer geometry and various flow velocities and the regional scale dependence of the perturbation on the hydraulic properties of the aquifer was demonstrated. The model was applied to the Bohemian Cretaceous Basin and it was shown that within a few kilometres from the recharge zones the observed surface heat flow may be underestimated by up to several tens of percent. The procedure was tested in two locations in this area, in an attempt to make hydrogeological corrections to the measured heat flow values in several boreholes.     

Performance Assessments of a Novel Well Design for Reducing Exposure to Bedrock‐Derived Arsenic

Arsenic in groundwater is a serious problem in New England, particularly for domestic well owners drawing water from bedrock aquifers. The overlying glacial aquifer generally has waters with low arsenic concentrations but is less used because of frequent loss of well water during dry periods and the vulnerability to surface‐sourced bacterial contamination. An alternative, novel design for shallow wells in glacial aquifers is intended to draw water primarily from unconsolidated glacial deposits, while being resistant to drought conditions and surface contamination. Its use could greatly reduce exposure to arsenic through drinking water for domestic use. Hypothetical numerical models were used to investigate the potential hydraulic performance of the new well design in reducing arsenic exposure. The aquifer system was divided into two parts, an upper section representing the glacial sediments and a lower section representing the bedrock. The location of the well, recharge conditions, and hydraulic properties were systematically varied in a series of simulations and the potential for arsenic contamination was quantified by analyzing groundwater flow paths to the well. The greatest risk of arsenic contamination occurred when the hydraulic conductivity of the bedrock aquifer was high, or where there was upward flow from the bedrock aquifer because of the position of the well in the flow system.     

Characterization of Flow Dynamics and Vulnerability in a Coastal Aquifer System

Traditional aquifer vulnerability techniques primarily rely on spatial property data for a region and are limited by their ability to directly or indirectly assess flow and transport processes occurring from the surface to depth within an aquifer system. The main objective of this study was to investigate groundwater vulnerability in terms of aquifer interconnectivity and flow dynamics. A combination of stable isotopes, groundwater age‐dating (radiocarbon), and geomorphic/geogenic spatial analyses was applied to a regional, highly developed coastal aquifer to explain the presence of nitrate at depth. The average δ¹³C value (?17.3 ± 2‰ VPDB, n = 27) is characteristic of groundwater originating from locally infiltrated precipitation through extensively cultivated soils. The average δ¹⁸O and δD values (?4.0 ± 0.1‰ VSMOW, n = 27; δD: ?19.3 ± 1‰ VSMOW, n = 27, respectively) are similar to precipitation water derived from maritime sources feeding the region's surface water and groundwater. Stable and radioactive isotopes reveal significant mixing between shallow and deep aquifers due to high velocities, hydraulic connection, and input of local recharge water to depths. Groundwater overdevelopment enhances deeper and faster modern water downward flux, amplifying aquifer vulnerability. Therefore, aquifer vulnerability is a variable, dependent on the type and degree of stress conditions experienced by a groundwater system as well as the geospatial properties at the near surface.