Characterizing complex eruptive activity at Santiaguito,Guatemala using infrasound semblance in networked arrays

We implement an infrasound semblance technique to identify acoustic sources originating from volcanic vents and apply the technique to the generally low-amplitude infrasound (< 3 Pa at 1 km) signals produced by Santiaguito dome in Guatemala. Semblance detection is demonstrated with data collected from two-element miniature arrays with ~ 30 m spacing between elements. The semblance technique is effective at identifying a range of eruptive phenomena, including pyroclastic-laden eruptions, vigorous degassing events, and rockfalls, even during periods of high wind contamination Many of the detected events are low in amplitude (tens of mPa) such that they are observed only by select arrays positioned with proximity and line-of-sight to the source. Larger events, such as the pyroclastic-laden eruptions, which occurred bi-hourly in 2009, were detected by all five arrays and produced an infrasonic signal that was correlated across the network. Network correlated events can be roughly located and map to the summit of the Caliente Vent where pyroclastic-laden eruptions originate. In general, the degree of Santiaguito infrasound event correlation is poor across the network, suggesting that complex source geometry contributes to asymmetric sound radiation.     

Source location variability and volcanic vent mapping with a small-aperture infrasound array at Stromboli Volcano,Italy

Stromboli Volcano in Italy is a persistently active, complex volcanic system. In May 2002 activity was confined to 3 major summit craters within which several active vents hosted multiple explosions each hour. During a 5-day field campaign an array of 3 low-frequency microphones was installed to investigate the coherent infrasound produced by degassing from these vents. Consistent phase lags across the 3 stations indicate distinct sources that are subsequently investigated to determine the associated vent location, apparent depth, and origin time. The cross-correlation routine allows for variations in comparison window length, waveform filtering bandwidth, and correlation and consistency thresholds, allowing for improved detection of certain types of degassing sources. Identification of activity at the various vents could be subsequently corroborated with 3 channels of synchronously acquired thermal data and video. During the May 2002 experiment persistent, energetic infrasound was observed from a passive degassing source within the Central Crater (CC) and transient infrasound, produced by discrete Strombolian explosions, was identified at 4 additional vents. The continuous infrasound produced by the CC exhibits variable frequency-dependent correlation lag times that are interpreted as a diffraction effect due to the acoustic radiators recessed location within a steep-walled crater. Such dispersion has important implications for accurate eruption source modeling because it indicates that infrasonic waveforms may be significantly filtered during propagation. Transient explosion signals from the Northeast Crater (NEC) and Southwest Crater (SWC) vents also exhibit dynamic correlation lag times, but this scatter may be more reasonably attributed to variable epicentral locations. Explosions from the NEC west vent, for instance, appear to emanate from a diffuse zone with a lateral extent in excess of 10 m.Editorial responsibility: R. Cioni     

Towards an Automatic Monitoring System of Infrasonic Events at Mt. Etna: Strategies for Source Location and Modeling

Active volcanoes characterized by open conduit conditions generate sonic and infrasonic signals, whose investigation provides useful information for both monitoring purposes and studying the dynamics of explosive processes. In this work, we discuss the automatic procedures implemented for a real-time application to the data acquired by a permanent network of five infrasound stations running at Mt. Etna volcano. The infrasound signals at Mt. Etna consist in amplitude transients, called infrasound events. The adopted procedure uses a multi-algorithm approach for event detection, counting, characterization and location. It is designed for an efficient and accurate processing of infrasound records provided by single-site and array stations. Moreover, the source mechanism of these events can be investigated off-line or in near real-time by using three different models: (1) Strombolian bubble; (2) resonating conduit and (3) Helmholtz resonator. The infrasound waveforms allow us to choose the most suitable model, to get quantitative information about the source and to follow the time evolution of the source parameters.     

Seismo-acoustic signals associated with degassing explosions recorded at Shishaldin Volcano,Alaska, 2003–2004

In summer 2003, a Chaparral Model 2 microphone was deployed at Shishaldin Volcano, Aleutian Islands, Alaska. The pressure sensor was co-located with a short-period seismometer on the volcano’s north flank at a distance of 6.62 km from the active summit vent. The seismo-acoustic data exhibit a correlation between impulsive acoustic signals (1–2 Pa) and long-period (LP, 1–2 Hz) earthquakes. Since it last erupted in 1999, Shishaldin has been characterized by sustained seismicity consisting of many hundreds to two thousand LP events per day. The activity is accompanied by up to ∼200 m high discrete gas puffs exiting the small summit vent, but no significant eruptive activity has been confirmed. The acoustic waveforms possess similarity throughout the data set (July 2003–November 2004) indicating a repetitive source mechanism. The simplicity of the acoustic waveforms, the impulsive onsets with relatively short (∼10–20 s) gradually decaying codas and the waveform similarities suggest that the acoustic pulses are generated at the fluid–air interface within an open-vent system. SO₂ measurements have revealed a low SO₂ flux, suggesting a hydrothermal system with magmatic gases leaking through. This hypothesis is supported by the steady-state nature of Shishaldin’s volcanic system since 1999. Time delays between the seismic LP and infrasound onsets were acquired from a representative day of seismo-acoustic data. A simple model was used to estimate source depths. The short seismo-acoustic delay times have revealed that the seismic and acoustic sources are co-located at a depth of 240±200 m below the crater rim. This shallow depth is confirmed by resonance of the upper portion of the open conduit, which produces standing waves with f=0.3 Hz in the acoustic waveform codas. The infrasound data has allowed us to relate Shishaldin’s LP earthquakes to degassing explosions, created by gas volume ruptures from a fluid–air interface.     

Evolution of tuff ring-dome complex: the case study of Cerro Pinto, eastern Trans-Mexican Volcanic Belt

Cerro Pinto is a Pleistocene rhyolite tuff ring-dome complex located in the eastern Trans-Mexican Volcanic Belt. The complex is composed of four tuff rings and four domes that were emplaced in three eruptive stages marked by changes in vent location and eruptive character. During Stage I, vent clearing produced a 1.5-km-diameter tuff ring that was then followed by emplacement of two domes of approximately 0.2 km³ each. With no apparent hiatus in activity, Stage II began with the explosive formation of a tuff ring ~2 km in diameter adjacent to and north of the earlier ring. Subsequent Stage II eruptions produced two smaller tuff rings within the northern tuff ring as well as a small dome that was mostly destroyed by explosions during its growth. Stage III involved the emplacement of a 0.04 km³ dome within the southern tuff ring. Cerro Pinto’s eruptive history includes sequences that follow simple rhyolite-dome models, in which a pyroclastic phase is followed immediately by effusive dome emplacement. Some aspects of the eruption, however, such as the explosive reactivation of the system and explosive dome destruction, are more complex. These events are commonly associated with polygenetic structures, such as stratovolcanoes or calderas, in which multiple pulses of magma initiate reactivation. A comparison of major and trace element geochemistry with nearby Pleistocene silicic centers does not show indication of any co-genetic relationship, suggesting that Cerro Pinto was produced by a small, isolated magma chamber. The compositional variation of the erupted material at Cerro Pinto is minimal, suggesting that there were not multiple pulses of magma responsible for the complex behavior of the volcano and that the volcanic system was formed in a short time period. The variety of eruptive style observed at Cerro Pinto reflects the influence of quickly exhaustible water sources on a short-lived eruption. The rising magma encountered small amounts of groundwater that initiated eruption phases. Once a critical magma:water ratio was exceeded, the eruptions became dry and sub-plinian to plinian. The primary characteristic of Cerro Pinto is the predominance of fall deposits, suggesting that the level at which rising magma encountered water was deep enough to allow substantial fragmentation after the water source was exhausted. Isolated rhyolite domes are rare and are not currently viewed as prominent volcanic hazards, but the evolution of Cerro Pinto demonstrates that individual domes may have complex cycles, and such complexity must be taken into account when making hazard risk assessments.     

Analysis of Signals from an Unique Ground-Truth Infrasound Source Observed at IMS Station IS26 in Southern Germany

Quantitative modeling of infrasound signals and development and verification of the corresponding atmospheric propagation models requires the use of well-calibrated sources. Numerous sources have been detected by the currently installed network of about 40 of the final 60 IMS infrasound stations. Besides non-nuclear explosions such as mining and quarry blasts and atmospheric phenomena like auroras, these sources include meteorites, volcanic eruptions and supersonic aircraft including re-entering spacecraft and rocket launches. All these sources of infrasound have one feature in common, in that their source parameters are not precisely known and the quantitative interpretation of the corresponding signals is therefore somewhat ambiguous. A source considered well-calibrated has been identified producing repeated infrasound signals at the IMS infrasound station IS26 in the Bavarian forest. The source results from propulsion tests of the ARIANE-5 rocket’s main engine at a testing facility near Heilbronn, southern Germany. The test facility is at a range of 320 km and a backazimuth of ~280° from IS26. Ground-truth information was obtained for nearly 100 tests conducted in a 5-year period. Review of the available data for IS26 revealed that at least 28 of these tests show signals above the background noise level. These signals are verified based on the consistency of various signal parameters, e.g., arrival times, durations, and estimates of propagation characteristics (backazimuth, apparent velocity). Signal levels observed are a factor of 2–8 above the noise and reach values of up to 250 mPa for peak amplitudes, and a factor of 2–3 less for RMS measurements. Furthermore, only tests conducted during the months from October to April produce observable signals, indicating a significant change in infrasound propagation conditions between summer and winter months.     

Reconstruction of the eruptive history of Usu volcano,Hokkaido, Japan,inferred from petrological correlation between tephras and dome lavas

Usu volcano has erupted nine times since 1663. Most eruptive events started with an explosive eruption, which was followed by the formation of lava domes. However, the ages of several summit lava domes and craters remain uncertain. The petrological features of tephra deposits erupted from 1663 to 1853 are known to change systematically. In this study, we correlated lavas with tephras under the assumption that lava and tephra samples from the same event would have similar petrological features. Although the initial explosive eruption in 1663 was not accompanied by lava effusion, lava dome or cryptodome formation was associated with subsequent explosive eruptions. We inferred the location of the vent associated with each event from the location of the associated lava dome and the pyroclastic flow deposit distribution and found that the position of the active vent within the summit caldera differed for each eruption from the late 17th through the 19th century. Moreover, we identified a previously unrecognized lava dome produced by a late 17th century eruption; this dome was largely destroyed by an explosive eruption in 1822 and was replaced by a new lava dome during a later stage of the 1822 event at nearly the same place as the destroyed dome. This new interpretation of the sequence of events is consistent with historical sketches and documents. Our results show that petrological correlation, together with geological evidence, is useful not only for reconstructing volcanic eruption sequences but also for gaining insight into future potential disasters.     

Seismic quantification of the explosions that destroyed the dome of Volcán de Colima, Mexico, in July–August 2003

In July–August 2003, the andesitic lava dome at Volcán de Colima, México, was destroyed by a sequence of explosions that replaced the 2×10⁶ m³ dome with a crater 200 m across and 30 m deep. The two strongest explosions occurred on July 17 and August 28. The initial low-frequency impulses that they produced, which were recorded on broadband seismic records, allowed an estimation of the counter forces of the initiating process as being equal to 0.3×10¹¹ N and 1×10¹¹ N for the July and August events, respectively. The seismic characteristics follow the Nishimura-Hamaguchi scaling law for volcanic explosions, reflecting self-similarity in the processes initiating explosive events. The results also show that counter forces can discriminate between the sizes of explosive eruptions that are assigned the same magnitude by conventional methods of classification such as the Volcanic Explosivity Index. The increasing use of broadband seismometers may therefore provide the basis for using counter forces to determine the magnitude of explosive eruptions.     

Cone-building block-and-ash flows: the Senyama volcanic products of O’e Takayama volcano,SW Japan

The Senyama volcanic products of the late Pliocene to early Pleistocene O’e Takayama volcano overlie a 100-m-thick, late Pliocene coastal quartz-sandstone and are intruded by an early Pleistocene dacite dome. The Senyama volcanic products are the remains of a cone that retains a basal part 1.5 km across and 150–250 m high from the substrate. The cone comprises dacite block-and-ash flow deposits and minor base-surge deposits occur at the base. Single beds of the block-and-ash flow deposits are 1–16 m thick and dip inward 20–40° at the base of the cone and inward or outward 10–20° at the summit. Juvenile fragments in the block-and-ash flow deposits are non- to poorly vesicular and commonly have curviplanar surfaces and prismatic joints extending inward from the surfaces, which imply quenching and brittle fracturing of dacite lava. They are variably hydrothermally altered. Nevertheless, juvenile blocks appear to retain a uniform direction of the magnetization vector residual during thermal demagnetization between 280°C and 625°C. At the time of the eruption, the well-sorted sand of the substrate was at the coast and a good aquifer that facilitated explosive interaction of water and the ascending dacite lava. The mechanism of the explosion perhaps involved thermal contraction cracking of the dacite lava, water-inflow into the interior of the lava, and explosive expansion of the water. Initial phreatomagmatic explosions opened the vent. Succeeding phreatomagmatic or phreatomagmatic–vulcanian explosions produced block-and-ash flow deposits around the vent. Hydrothermal silver-ore deposits and manganese-oxide deposits occur in the Senyama volcanic products and the underlying sandstone, respectively. They could represent post-eruptive activity of the hydrothermal system developed in and around the cone.     

Broadband seismic experiment at Merapi Volcano, Java, Indonesia: very-long-period pulses embedded in multiphase earthquakes

Multiphase (MP) and low frequency (LF) earthquakes with spectral peak amplitudes at 3–4 and 1 Hz, respectively, are two common types of shallow volcanic earthquakes previously recognized at Merapi Volcano. Their mechanisms are poorly understood but MPs have been temporally associated with lava dome growth. We conducted a seismic experiment in January–February 1998, using four broadband seismographs to investigate the nature of seismic activity associated with dome growth. During our experiment, Merapi experienced mild dome growth with low-level seismic activity. We compare our data to that recorded on a local short-period (SP) network, with the following preliminary results.MP and LF events as recorded and classified on the short-period network instruments were recognized on the broadband network. Frequency spectrograms revealed similar patterns in the near summit region at widely separated broadband stations. Higher frequency spectra than previously recognized were identified for both MP and LF events, and were strongly attenuated as a function of radial distance from the source. Thus the spectral characteristics of these events as recorded on far-field stations are not fully indicative of the source processes. In particular, many events classified as LF-type appear to have much high frequency energy near the source. This aspect of these so-called LF earthquakes, and their association with very-long-period (VLP) pulses, suggests that many events identified in the far-field as LF events are in actuality a variety of the MP event and involve similar source processes. Broadband records indicated that simple large-amplitude VLP pulses were embedded in MP and LF wavetrains. From event to event these pulses were similar in their waveforms and had periods of 4 s. VLP events embedded in LF and MP earthquakes were located using particle motions. The epicenters were clustered in a central region of the dome complex, and preliminary source depths were within about 100 m of the dome surface, suggesting a source region deep within the dome or the uppermost conduit. A similar source location was established by study of MP high-frequency onsets. Our broadband data suggests that we have recorded both elastic seismic waves and a simple embedded pulse that is interpreted to represent a surface tilt at the seismometer site. The inferred tilt indicates an inflation and subsequent deflation, possibly caused by a gas pressure pulse or episodic shallow magma transport with stick-slip movement of the conduit wall.     

Acoustic source characterization of impulsive Strombolian eruptions from the Mount Erebus lava lake

We invert for acoustic source volume outflux and momentum imparted to the atmosphere using an infrasonic network distributed about the erupting lava lake at Mount Erebus, Ross Island, Antarctica. By modeling these relatively simple eruptions as monopole point sources we estimate explosively ejected gas volumes that range from 1,000 m³ to 24,000 m³ for 312 lava lake eruptions recorded between January 6 and April 13, 2006. Though these volumes are compatible with bubble volumes at rupture (as estimated from explosion video records), departures from isotropic radiation are evident in the recorded acoustic wavefield for many eruptions. A point-source acoustic dipole component with arbitrary axis orientation and strength provides precise fit to the recorded infrasound. This dipole source axis, corresponding to the axis of inferred short-duration material jetting, varies significantly between events. Physical interpretation of dipole orientation as being indicative of eruptive directivity is corroborated by directional emissions of ejecta observed in Erebus eruption video footage. Although three azimuthally distributed stations are insufficient to fully characterize the eruptive acoustic source we speculate that a monopole with a minor amount of oriented dipole radiation may reasonably model the primary features of the recorded infrasound for these eruptions.     

Monitoring Seismo-volcanic and Infrasonic Signals at Volcanoes: Mt. Etna Case Study

Volcanoes generate a broad range of seismo-volcanic and infrasonic signals, whose features and variations are often closely related to volcanic activity. The study of these signals is hence very useful in the monitoring and investigation of volcano dynamics. The analysis of seismo-volcanic and infrasonic signals requires specifically developed techniques due to their unique characteristics, which are generally quite distinct compared with tectonic and volcano-tectonic earthquakes. In this work, we describe analysis methods used to detect and locate seismo-volcanic and infrasonic signals at Mt. Etna. Volcanic tremor sources are located using a method based on spatial seismic amplitude distribution, assuming propagation in a homogeneous medium. The tremor source is found by calculating the goodness of the linear regression fit (R ²) of the log-linearized equation of the seismic amplitude decay with distance. The location method for long-period events is based on the joint computation of semblance and R ² values, and the location method of very long-period events is based on the application of radial semblance. Infrasonic events and tremor are located by semblance–brightness- and semblance-based methods, respectively. The techniques described here can also be applied to other volcanoes and do not require particular network geometries (such as arrays) but rather simple sparse networks. Using the source locations of all the considered signals, we were able to reconstruct the shallow plumbing system (above sea level) during 2011.     

Effusive history of the Grande Découverte Volcanic Complex, southern Basse-Terre (Guadeloupe, French West Indies) from new K–Ar Cassignol–Gillot ages

The Grande Découverte Volcanic Complex (GDVC), active since at least 0.2 Ma, is the most recent volcanic complex of the Basse-Terre Island (Guadeloupe, Lesser Antilles Arc). A detailed geochronological study using the K–Ar Cassignol–Gillot technique has been undertaken in order to reconstruct the history of effusive activity of this long-lived volcanic system. Twenty new ages permit to suggest that the GDVC experienced at least six main effusive stages, from 200 ka to present time. To the north of the GDVC, the GDS (Grande Découverte–Soufrière volcano) has been active since at least 200 ka, and to the south, the TRMF (Trois-Rivières–Madeleine Field), started to be emplaced 100 ka. Morphological investigations suggest that the whole TRMF volcanism was emitted from vents distinct from the GDS, most probably a large E–W fissure network linked to the Marie-Galante rift. The mean age of 62 ± 5 ka, obtained for the E–W Madeleine–Le Palmiste alignment suggests that a fissure-opening event occurred at that time. However, whole-rock major and trace element signatures are similar for both systems, suggesting that a common complex magma-plumbing system has fed the overall GDVC. We report very young ages for lava flows from the TRMF, which implies that < 10 ka volcanic activity is now identified for both massifs. Although hazards associated with such effusive volcanism are much lower than those associated with potential flank-collapse of the Soufrière lava dome or a magmatic dome eruption with explosive phases within the GDS, the emplacement of relatively large Holocene age lava flows (3–1 × 10⁸ m³) suggests that a revised integrated volcanic hazard assessment for Southern Basse-Terre should now consider the potential for renewed future activity from two Holocene volcanic centers including the TRMF.     

Occurrence of Somma-Vesuvio fine ashes in the tephrostratigraphic record of Panarea,Aeolian Islands

Ash-rich tephra layers interbedded in the pyroclastic successions of Panarea island (Aeolian archipelago, Southern Italy) have been analyzed and related to their original volcanic sources. One of these tephra layers is particularly important as it can be correlated by its chemical and morphoscopic characteristics to the explosive activity of Somma-Vesuvio. Correlation with the Pomici di Base eruption, that is considered one of the largest explosive events causing the demolition of the Somma stratovolcano, seems the most probable. The occurrence on Panarea island of fine ashes related to this eruption is of great importance for several reasons: 1) it allows to better constrain the time stratigraphy of the Panarea volcano; 2) it provides a useful tool for tephrochronological studies in southern Italy and finally 3) it allows to improve our knowledge on the distribution of the products of the Pomici di Base eruption giving new insights on the dispersion trajectories of fine ashes from plinian plumes. Other exotic tephra layers interbedded in the Panarea pyroclastic successions have also been found. Chemical and sedimentological characteristics of these layers allow their correlation with local vents from the Aeolian Islands thus constraining the late explosive activity of Panarea dome.     

The nature and formation of cristobalite at the Soufrière Hills volcano, Montserrat: implications for the petrology and stability of silicic lava domes

Cristobalite is commonly found in the dome lava of silicic volcanoes but is not a primary magmatic phase; its presence indicates that the composition and micro-structure of dome lavas evolve during, and after, emplacement. Nine temporally and mineralogically diverse dome samples from the Soufrière Hills volcano (SHV), Montserrat, are analysed to provide the first detailed assessment of the nature and mode of cristobalite formation in a volcanic dome. The dome rocks contain up to 11 wt.% cristobalite, as defined by X-ray diffraction. Prismatic and platy forms of cristobalite, identified by scanning electron microscopy (SEM), are commonly found in pores and fractures, suggesting that they have precipitated from a vapour phase. Feathery crystallites and micro-crystals of cristobalite and quartz associated with volcanic glass, identified using SEM-Raman, are interpreted to have formed by varying amounts of devitrification. We discuss mechanisms of silica transport and cristobalite formation, and their implications for petrological interpretations and dome stability. We conclude: (1) that silica may be transported in the vapour phase locally, or from one part of the magmatic system to another; (2) that the potential for transport of silica into the dome should not be neglected in petrological and geochemical studies because the addition of non-magmatic phases may affect whole rock composition; and (3) that the extent of cristobalite mineralisation in the dome at SHV is sufficient to reduce porosity—hence, permeability—and may impact on the mechanical strength of the dome rock, thereby potentially affecting dome stability.     

Geology of the quaternary volcanic centres of the east Anatolia

Following the collision along the Bitlis–Zagros suture, a north–south convergence between the Arabian Platform and Laurasia has continued uninterrupted until the present. As a result, the continental crust has been shortened, thickened and consequently elevated to form the Turkish–Iranian high plateau. On the high plateau volcanic activity began during the Neogene, intensified during the late Miocene–Pliocene and continued until historical times. Large volcanic centres have been developed during the Quaternary which form significant peaks above the Turkish–Iranian high plateau. Among the Quaternary volcanoes, the major volcanic centres are Ararat, Tendürek, Suphan and Nemrut. Ararat (Ağri Daği) is the largest volcanic center and is a compound stratovolcano, consisting of Greater Ararat and lesser Ararat. The former represents the highest elevation of Anatolia reaching over 5000 m in height. Tendürek is a double-peaked shield volcano, which produced a voluminous amount of basalt lava as extensive pahoehoe, and aa flows. It has an ill-defined semi-caldera. Suphan is an isolated stratovolcano, capped by silicic dome. It represents the second highest topographic elevation in Anatolia, with a height of over 4000 m. A cluster of subsidiary cones and small domes surrounds the volcano. Nemrut is the largest member of a group of volcanoes, which trend north–south. It is a stratovolcano, having a well-defined collapse caldera and a caldera lake. Various volcanic ejecta have been extruded from these volcanic centres over the last 1 to 2 million years. The Quaternary volcanic centres, although temporally and spatially closely associated, display a wide range of lavas from basalt to rhyolite. The volcanoes have diverse compositional trends; Ararat is distinctly subalkaline, Suphan is mildly subalkaline, Nemrut is mildly alkaline and Tendürek is strongly alkaline. The major and trace element compositions together with the isotope ratios indicate that their magmas were generated from a heterogeneous mantle source. Each of the volcanic centres has undergone a partly different magmatic evolution.     

Scattering objects in the lower mantle beneath northeastern China observed with a short-period seismic array

Precursor and coda portions of short-period PcP waves (reflected P wave from the core-mantle boundary, CMB) recorded at J-array stations in Japan were analyzed in order to extract weak scattered signals originating from small-scale heterogeneities in the lowermost mantle beneath northeastern China. Two nuclear explosions at Lop Nor in China detonated on 21 May 1992 (Mb=6.5) and 8 June 1996 (Mb=5.9) were used for our analysis.Three-dimensional grids above the CMB were defined in the area around the PcP bounce points beneath northeastern China to calculate theoretical travel times of scattered waves which propagate from the sources to each grid point and arrive at each station based on the IASP91 model. Subsequently the waveforms were aligned with respect to the theoretical travel times and the semblance (an amplitude dependent measure of coherency) was calculated for each grid point. In order to obtain a more accurate travel time correction, we applied a cross correlation method to PcP waveforms in order to reduce picking error of the PcP onset time. A cross convolution method was also applied so that the two events could be analyzed simultaneously without using unstable deconvolutions.We could identify regions with relative high semblance values in semblance contour maps at about 200 and 375 km above the CMB. Stacking waveforms with respect to the theoretical travel times for the grid points with relative high semblance values indicate coherent wavelets originating at those grid points, that is, they correspond to scattered waves originating from small-scale heterogeneities in the lowermost mantle. Our results indicate the existence of small-scale scattering objects in the D″ layer, especially in the depth range of 200 and 375 km above the CMB beneath northeastern China. Considering recent tomographic images of high velocity anomalies in this area, these scattering objects could be fragments of old oceanic crusts which have subducted through the lower mantle and have accumulated in the D″ layer beneath northeastern China.     

THE CHARACTERISTICS OF VOLCANIC ROCKS STRUCTURE AND LITHOFACIES OF DALIUCHONG VOLCANO IN THE TENGCHONG VOLCANIC FIELD,YUNNAN PROVINCE

A set of grey-purple layered volcanic rocks are found widely distributed from the mountain flank to the main peak of Daliuchong volcano, but it's difficult to identify whether they are volcaniclastic rock or lava rock just by field investigation and the crystal structure observation under microscope. The study of matrix microstructure of the volcanic rocks can help to identify the volcanic facies. We recognize the eruptive facies rocks through observation of the matrix microstructure and pore shape with comparison to those of the volcanic vent facies, extrusive facies and effusive facies rocks under microscope, thus the mentioned layered volcanic rocks could be named as dacitic crystal fragment tuff. Combining the joint work of field investigation, systematic sampling, chemical analyzing and microscopic observation, we summary the Daliuchong volcanic facies as follows:1. The effusive facies lava constitutes the base of Daliuchong volcano and was produced by early eruption.2. The explosive facies is composed of dacite crystal fragment welded tuff and volcanic breccia and mainly distributes on the W, S and NE flank of the volcanic cone.3. The volcanic conduit with its diameter more than one hundred meters is located about 100 meters south of the main peak of the Daliuchong volcano.4. The extrusive facies rock is only exposed near the peak of Daliuchong volcano.Therefore, the volcanism of Daliuchong volcano can be speculated as:Large-scale lava overflowing occurred in the early eruption period; then explosive eruptions happened; at last, the volcanisms ceased marked with magma extrusion as lava dome and plug.     

Infrasonic Signal Detection and Source Location at the Prototype International Data Centre

—?This paper describes an automatic and interactive data processing system designed to locate impulsive atmospheric sources with a yield of at least one kiloton by detecting and characterizing the airborne infrasound radiated by the source. The infrasonic processing subsystem forms part of a larger system currently under development at the Prototype International Data Center (PIDC) in Arlington, Virginia where seismic, hydroacoustic, radionuclide and infrasonic methods are used to detect and locate impulsive sources in any terrestrial environment. Infrasonic signal detection is achieved via a coincidence detector which requires both the normalized cross correlation and the short-term-average/long-term-average ratio of a beam in the direction of maximum correlation to exceed predetermined threshold values simultaneously before a detection is declared. The infrasound propagation model currently used to infer travel-time information assumes the horizontal sound speed across the ground to be 320.0?m/s. This crude model is currently being replaced by a model which predicts travel-time information through a ray-tracing algorithm for acoustic waves in an atmosphere with seasonal representations for temperature and wind. A novel feature of the source location process is the fusion of all available arrival information, whether it be seismic, hydroacoustic or infrasonic to locate a single source where it is reasonable to hypothesize a common source. In its final configuration the infrasonic subsystem will routinely process data from the global 60-station International Monitoring System (IMS) infrasonic network currently under development.