Assessment of potential sediment contamination using screening methods (XRF,TGA/MS) taking into account principles of green chemistry,Eastern Slovakia

Mining and milling of metal ores coupled with industries have bequeathed many countries the legacy of wide distribution of metal contaminants in sediments. The aim of this study was to assess potential sediment contamination via useful screening methods (XRF, CHNS, TGA/MS). The sediments were collected from the water reservoir Krompachy Eastern Slovakia in April 2015. Within the frame of evaluation it was found that the concentrations of the study elements (Cu, Zn, As, Pb, Cr, Ni, Cd) exceeded some of the MPC, TV and IV values. Sample c was the most polluted by metals, which evident according to it’s the highest CHNS proportion as well as the highest clay and silt proportion. In the samples studied the best correlation was confirmed between weight losses in the temperature range (400–620 °C) and the following metal concentrations: Cu (r = 0.89), Zn (r = 0.88), As (r = 0.93), Hg (r = 0.83), Pb (r = 0.87). The greatest proportions of m/z 44, m/z 18 were detected at temperatures (400–620 °C) associated with decomposition of minerals such as siderite, barite, and exothermic loss of more refractory aromatic C took also place.     

Evaluation of the removal of heavy metals in a natural wetland impacted by mining activities in Mexico

This research is focused on evaluating heavy metals (Cd, Cu, Fe, Mn, Pb, and Zn) uptake and removal by Eleocharis ovata, Cyperus manimae, Typha dominguensis, and Pteridium aquilinum in a natural wetland impacted by mining activities. We analyzed heavy metals content and distribution in native plants, soils, and water of a semipermanent natural wetland in Taxco de Alarcón, Guerrero, and we also determined the physicochemical characteristics of the water. Translocation factor (TF) and bioconcentration factor (BCF) were evaluated. Results showed that physical and chemical conditions are favorable for plants development. Correlation analysis showed a good and positive relation (0.95) between Cu and Pb in soils and plants. In the analyzed matrices: Zn (0.62–2.20 mg/L) exceeded the permissible limits in water, high concentrations of Pb and Zn (26.57–525.67 and 266.67–983.33 mg/kg, respectively) were detected in the studied soils, and Pb exceeded the normal range for E. ovata and P. aquilinum in the analyzed plants. Uptake of heavy metals in the tissues of different species was found in the following order: root > leaf. Data of TF and BCF showed that E. ovata is a tolerant plant with respect to heavy metals exposure since TF value was greater than 1. This study showed that E. ovata could be considered as a bioaccumulator of heavy metals in contaminated soils.     

Distribution,enrichment and sources of trace metals in the topsoil in the vicinity of a steel wire plant along the Silk Road economic belt,northwest China

The West Development Program, initiated in 2000 by the central government of China, has attracted huge investments in the arid and semiarid regions of northwest China. As a consequence of this development, environmental pollution and ecological degradation have been widely reported. The Silk Road economic belt proposed by China promotes further economic development in the regions, but rational planning and regular monitoring are essential to minimize any additional negative impacts of the anthropogenic activities. This article reports an investigation on the distribution, enrichment and sources of trace metals in the topsoil in and around the Ningxia Hengli Steel Wire Plant (HSWP) situated along the Silk Road economic belt. The concentrations of Cd, Pb, Cr, Cu, Zn, Ni, Mn, V and Co in the surface soils of the study area vary, respectively, in the following ranges: 0.083–18.600, 21.9–2681.0, 58.0–100.0, 14.6–169.9, 59.0–4207.3, 19.3–40.8, 411–711, 55.2–76.6 and 7.46–25.21 mg/kg. The concentrations of Cd, Pb, Cr, Cu, Zn and Co are significantly higher than their local background values. Pollution levels of these trace metals in the surface soils were assessed using contamination index (C _f ⁱ ), geo-accumulation index (I _geo), modified contamination degree (mC _d) and pollution load index. The potential ecological risks caused by the metal pollution were assessed by means of potential ecological risk factor (E _f ⁱ ) and potential ecological risk index. The Spearman correlation and cluster analysis were applied to determine the contamination sources. The HSWP zone, associated with very high potential ecological risk caused by Pb and Cd, is more seriously contaminated by trace metals than the residential zone. This study indicates that Cd, Pb, Cu, Zn and Co mainly originate from industrial pollution, whereas Cr, Mn, Ni and V result from both industrial activities and natural processes.     

Kinetics of DTPA extraction of Zn,Pb, and Cd from contaminated calcareous soils amended with sewage sludge

The aim of this study was to determine the influence of sewage sludge (SLU) amendment on the desorption characteristics of zinc (Zn), lead (Pb), and cadmium (Cd) in contaminated calcareous soils. Three levels of SLU (0, 1, and 3% w/w) were added to the two calcareous contaminated soils. Samples were incubated for 30 days and equilibrated with 0.005 M DTPA for 0.25 to 240 h. The addition of SLU significantly increased the amount of DTPA-extractable Zn in soils. While the amounts of Cd, Pb, dissolved organic carbon (DOC), and pH showed a significant increase only in 3% w/w of SLU, with the exception of Cd desorption in 1% w/w of SLU, kinetics of Zn, Pb, and Cd extraction increased together with an increase in the level of applied SLU. The best models for describing desorption data were explicitly power function and Elovich. The rate constants of Zn and Pb had significant correlations with DTPA-extractable Zn and Pb, DOC and pH, which affect Zn and Pb desorption. Also, the rate constants of Cd had significant correlations with CEC that can be deemed as equivalent to the fact that Cd desorption is controlled by surface adsorption, particularly in the lower sludge application amount. These results can be used for management of sewage sludge application in contaminated calcareous soils.     

Toxinogenicity and cytotoxicity of <Emphasis Type="Italic">Alternaria,Aspergillus</Emphasis> and <Emphasis Type="Italic">Penicillium</Emphasis> moulds isolated from working environments

There is currently limited research available on the secondary metabolites of moulds in workplaces. The aim of this study was to determine the mould contamination in museums (N = 4), composting plants (N = 4) and tanneries (N = 4) and the secondary metabolite profiles of Alternaria, Aspergillus and Penicillium isolates from these workplaces. Alternaria, Aspergillus and Penicillium species were identified using the ITS1/2 sequence of the rDNA region. Mould metabolites were quantitatively analysed on standard laboratory medium and mineral medium containing materials specific to each workplace using liquid chromatography-mass spectrometry. We also examined the cytotoxicity of the moulds using MTT (3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide) assays. Air microbiological contamination analyses showed a number of microorganisms, ranging from 2.4 × 10³ CFU m^?3 (composting plants) to 6.8 × 10⁴ CFU m^?3 (tanneries). We identified high percentages of Alternaria, Aspergillus and Penicillium moulds (air 57–59%, surfaces 10–65%) in all workplaces. The following moulds were the most cytotoxic (>90%): Alternaria alternata, A. limoniasperae, Aspergillus flavus, Penicillium biourgeianum, P. commune and P. spinulosum. The same mould species isolated from different working environments exhibited varying toxigenic and cytotoxic properties. Modifying the culture medium to simulate environmental conditions most often resulted in the inhibition of secondary metabolite production. Moulds isolated from the working environments produced the following mycotoxins (ng g^?1): chanoclavines (0.28–204), cyclopiazonic acid (27.1–1045), fumigaclavines (0.33–10,640,000), meleagrin (0.57–13,393), roquefortins (0.01–16,660), rugulovasines (112–220), viridicatin (0.12–957), viridicatol (4.23–2753) and quinocitrinines (0.07–1104), which may have a negative impact on human health.     

Bioaccumulation of heavy metals in <Emphasis Type="Italic">Limnobium laevigatum</Emphasis> and <Emphasis Type="Italic">Ludwigia peploides</Emphasis>: their phytoremediation potential in water contaminated with heavy metals

Contamination with heavy metals in surface and groundwater is a threat to human health and ecosystems. Due to this, the need arises to remediate water polluted through ecological and profitable technologies, such as phytoremediation. The objective of the work was to evaluate the concentration of lead (Pb) and zinc (Zn) in the floating macrophytes Limnobium laevigatum and Ludwigia peploides, after being exposed to contaminated water experimentally. In this way to be able to determine if these plants have mechanisms that allow them to accumulate the metals in the roots and to perform the translocation of these to different vegetative organs, L. laevigatum and L. peploides were placed in solutions contaminated with Pb ([Pb]?=?5 mg/l) and Zn ([Zn]?=?20 mg/l). The concentrations of metals in water, root and leaf samples were evaluated as a function of time (0, 1, 2 and 4 days). The determination of the metals was performed by the atomic absorption spectrophotometry technique. After 4 days of exposure to Pb and Zn, the plants showed high metal removal efficiencies of water, more to 70% in all cases. Pb was accumulated fundamentally by roots, while Zn was accumulated more in the leaves. In addition, the bioconcentration and translocation factors for each metal were calculated.     

High-resolution profiles of trace metals assessed by DGT techniques in lake sediment porewaters

The technique of diffusive gradients in thin films (DGT) was applied to obtain high-resolution vertical profiles of trace metals in sediment porewater of a eutrophic lake, Lake Chaohu. All sampling sediments were under anaerobic conditions with Eh values below 0, the redox potential profile in M4 was relatively stable, and higher Eh values in M4 than that in M1 were observed due to hydrodynamic effects. Fe, Mn and As exhibited closely corresponding profiles due to the co-release of Fe and Mn oxides and the reduction of As. Higher Fe and Mn concentrations and lower As concentrations were observed in M1 of the western half-lake than those in M4 of the eastern half-lake due to different sources and metal contamination levels in the two regions. Cu and Zn showed increasing concentrations similar to Mn and Fe at 1–2 cm depth of sediments, while DGT measured Co, Ni, Cd and Pb concentrations decreased down to 3–4 cm in the profiles. Co, Ni, Cu, Zn, Cd and Pb showed insignificant regional concentration variances in the western and eastern half-lakes. According to the R(C _DGT/C _{centrifugation}) values, the rank order of metal labilities decrease as follows: Fe (>1) > Cu, Pb, Zn (>0.9) > Co, Ni, Cd (>0.3) > Mn, As (>0.1).     

Elastic behavior of vanadinite,Pb<Subscript>10</Subscript>(VO<Subscript>4</Subscript>)<Subscript>6</Subscript>Cl<Subscript>2</Subscript>, a microporous non-zeolitic mineral

The high-pressure behavior of a vanadinite (Pb₁₀(VO₄)₆Cl₂, a = b = 10.3254(5), c = 7.3450(4) Å, space group P6₃/m), a natural microporous mineral, has been investigated using in-situ HP-synchrotron X-ray powder diffraction up to 7.67 GPa with a diamond anvil cell under hydrostatic conditions. No phase transition has been observed within the pressure range investigated. Axial and volume isothermal Equations of State (EoS) of vanadinite were determined. Fitting the P–V data with a third-order Birch-Murnaghan (BM) EoS, using the data weighted by the uncertainties in P and V, we obtained: V ₀ = 681(1) Å³, K ₀ = 41(5) GPa, and K′ = 12.5(2.5). The evolution of the lattice constants with P shows a strong anisotropic compression pattern. The axial bulk moduli were calculated with a third-order “linearized” BM-EoS. The EoS parameters are: a ₀ = 10.3302(2) Å, K ₀(a) = 35(2) GPa and K′(a) = 10(1) for the a-axis; c ₀ = 7.3520(3) Å, K ₀(c) = 98(4) GPa, and K′(c) = 9(2) for the c-axis (K ₀(a):K ₀(c) = 1:2.80). Axial and volume Eulerian-finite strain (fe) at different normalized stress (Fe) were calculated. The weighted linear regression through the data points yields the following intercept values: Fe _a (0) = 35(2) GPa for the a-axis, Fe _c (0) = 98(4) GPa for the c-axis and Fe _V (0) = 45(2) GPa for the unit-cell volume. The slope of the regression lines gives rise to K′ values of 10(1) for the a-axis, 9(2) for the c-axis and 11(1) for the unit cell-volume. A comparison between the HP-elastic response of vanadinite and the iso-structural apatite is carried out. The possible reasons of the elastic anisotropy are discussed.     

<Emphasis Type="Italic">Robinia pseudoacacia</Emphasis> and <Emphasis Type="Italic">Melandrium album</Emphasis> in trace elements biomonitoring and air pollution tolerance index study

The accumulation efficiency of selected trace elements in the leaves of Melandrium album and Robinia pseudoacacia grown on heavy metal contaminated sites in comparison with a non-contaminated one was evaluated. The study was undertaken to calculate air pollution tolerance index and to determine the contents of selected metabolites: glutathione, non-protein thiols, ascorbic acid, chlorophyll and the activity of antioxidant enzymes: guaiacol peroxidase and superoxide dismutase. Such estimations can be useful in better understanding of plants defense strategies and potential to grow in contaminated environments. The results in the most contaminated site revealed higher contents of metals in M. album leaves, especially Zn, Cd and Pb (3.4, 6 and 2.3 times higher, respectively) in comparison with the R. pseudoacacia. Better accumulation capacity found in M. album was shown by metal accumulation index values. The plants could be used as indicators of Zn, Cd (both species) and Pb (M. album) in the soil. Glutathione content (in both species) and peroxidase activity (in M. album), general markers of heavy metals contamination, were increased in contaminated sites. In most cases in contaminated areas R. pseudoacacia had decreased ascorbic acid and chlorophyll levels. Opposite tendency was recorded in M. album leaves, where similar or higher contents of the above-mentioned metabolites were found. In our study, M. album and R. pseudoacacia proved to be sensitive species with the air pollution tolerance index lower than 11 and can be recommended as bioindicators.     

Soil bacterial strains with heavy metal resistance and high potential in degrading diesel oil and <Emphasis Type="Italic">n</Emphasis>-alkanes

Four bacterial strains, capable of degrading diesel oil, n-alkanes or hexadecane, were isolated from soils contaminated with petroleum oil and identified. Strains of Pseudomonas sp., Pseudomonas putida TPHK-1 and Pseudomonas aeruginosa TPHK-4, were more efficient in degrading high concentrations of the hydrocarbons than the other two strains, Stenotrophomonas maltophilia TPHK-2 and Acenitobacter sp. TPHK-3. P. putida TPHK-1 exhibited tolerance to very high concentrations of heavy metals such as cadmium, lead, zinc and copper. The innate ability of P. putida TPHK-1, as evidenced by the amplified genes alkB1 and alkB2 that encode alkane hydroxylases, and cat12o and cat23o coding for catechol dioxygenase, in degrading diesel oil in the presence of heavy metals is far greater than that of the strains reported in the literature. Heavy metal tolerance coupled with rapid degradation of hydrocarbons, even at high concentrations, suggests that P. putida TPHK-1 has a great potential in remediating soils contaminated with mixtures of hydrocarbons and heavy metals.     

Metal contamination of agricultural soils in the copper mining areas of Singhbhum shear zone in India

The study was intended to investigate the heavy metal contamination in the agricultural soils of the copper mining areas in Singhbhum shear zone, India. The total concentrations of the metals were determined by inductively coupled plasma-mass spectrometer (ICPMS). Pollution levels were assessed by calculating enrichment factor (EF), geo-accumulation index (\(I_\mathrm{geo}\)), contamination factors (CF), pollution load index (PLI), Nemerow index and ecological risk index (\(R_{I}\)). The metal concentrations in the soil samples exceeded the average shale values for almost all the metals. Principal component analysis resulted in extraction of three factors explaining 82.6% of the data variability and indicated anthropogenic contribution of Cu, Ni, Co, Cr, Mn and Pb. The EF and \(I_\mathrm{geo}\) values indicated very high contamination with respect to Cu followed by As and Zn in the agricultural soils. The values of PLI, \(R_{I}\) and Nemerow index, which considered the overall effect of all the studied metals on the soils, revealed that 50% of the locations were highly polluted with respect to metals. The pollution levels varied with the proximity to the copper mining and processing units. Consequently, the results advocate the necessity of periodic monitoring of the agricultural soils of the area and development of proper management strategies to reduce the metal pollution.     

Compressibility of strontium orthophosphate Sr<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> at high pressure

High pressure in situ synchrotron X-ray diffraction experiment of strontium orthophosphate Sr₃(PO₄)₂ has been carried out to 20.0 GPa at room temperature using multianvil apparatus. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields a volume of V ₀ = 498.0 ± 0.1 Å³, an isothermal bulk modulus of K _T  = 89.5 ± 1.7 GPa, and first pressure derivative of K _T ′ = 6.57 ± 0.34. If K _T ′ is fixed at 4, K _T is obtained as 104.4 ± 1.2 GPa. Analysis of axial compressible modulus shows that the a-axis (K _a  = 79.6 ± 3.2 GPa) is more compressible than the c-axis (K _c  = 116.4 ± 4.3 GPa). Based on the high pressure Raman spectroscopic results, the mode Grüneisen parameters are determined and the average mode Grüneisen parameter of PO₄ vibrations of Sr₃(PO₄)₂ is calculated to be 0.30(2).     

The use of ultrasonic frequencies to control the bloom formation,regrowth, and eco-toxicity in <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis>

This study is focused on the use of ultrasound to disrupt Microcystis aeruginosa growth, with consideration for the gap between laboratory-scale experiment and field application. Laboratory-scale sonication systems with different frequencies (i.e., 20, 584, 869, and 1137 kHz) for 30 min at 10-min intervals were conducted to investigate their effectiveness at disrupting M. aeruginosa growth. The toxicological effect of sonicated M. aeruginosa including microcystin-LR was also evaluated using a Daphnia magna acute toxicity test. High frequencies, 869 and 1137 kHz, resulted in more than a 60% reduction of cells after 30 min of sonication. Low to middle frequencies, 20 and 584 kHz, only showed a 30% reduction of cells after 30 min of sonication. High frequencies also led to the inactivation of cell proliferation during M. aeruginosa regrowth, due to cellular destruction and finally cell death. However, the concentration of microcystin-LR and the potential adverse effects of M. aeruginosa on D. magna could not be controlled using ultrasonic frequencies. Therefore, our results suggest that ultrasonic frequencies between 869 and 1137 kHz are effective at controlling bloom formation in M. aeruginosa and the regrowth of M. aeruginosa after sonication, but not at controlling microcystin-LR concentrations and its adverse effects on D. magna. Consequently, a combined purification technology to reduce the cyanotoxins such as microcystin-LR, rather than ultrasonic frequency alone, will be needed to control M. aeruginosa growth and its toxicity levels in the aquatic environment.     

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

Bioleaching potential of bacterial communities in historic mine waste areas

Microbial activity has the potential to alter all cultural heritage in mining and metallurgy, due to metal mobilization by leaching. This communication shows the consequences of the bioleaching ability of two natural enrichments on copper slag samples from a historic ore smelting site in Sangerhausen (Mansfeld, Südharz, Saxony-Anhalt, Germany). Enrichment cultures gained from mine drainage were dominated by either the iron and sulfur-oxidizing Acidithiobacillus ferrivorans, or by the iron-oxidizing Leptospirillum. During 35 days of bioleaching in media containing copper slag pulp, inoculated with these enrichments, the change in pH and solubilized metal concentrations of the systems were monitored. Both bacterial strains were completely different from each other in their pattern of pH variation and rates of metal solubilization. The maximum removal of Cu (1725 mg/l) and Zn (715 mg/l) from copper slag substrate was achieved with enrichment culture of A. ferrivorans SCUT-1. However, maximum Mn (207 mg/l), Pb (86 mg/l), and Ni (75 mg/l) removal was observed with enrichment culture of Leptospirillum strain YQP-1. Implications for metal mobilization along with alteration of artifacts from not only historic mining areas but also aspects of decontamination and remediation are discussed.     

Uptake of metals by plants in urban areas

In the present study, bulk contents of Ni, Zn, Cu, Pb and Mn in urban area of Tehran city are determined. Subsequently, the chemical bonds of metals with various soil fractions are brought out. Chemical partitioning studies revealed that various percentile of Ni, Zn, Cu, Pb and Mn is found in anthropogenic portion of soils. Zinc, Ni, Cu, Pb and Mn fall within “low pollution” class in accordance with index of pollution (I _POLL). The trend of anthropogenic share of studied metals in soils of Tehran is Zn (55 %) > Cu (31 %) > Ni and Pb (30 %) > Mn (12 %). The overall potential of studied plants in metal removal from soil is Salvia > Viola > Portulaca. It should be pointed out that roots have higher potential in metal removal from soil when compared with leaf and stem. Lithogenic portion of metals remains intact before and after pot analysis. Thus, phytoremediation is highly dependent on the chemical bonds of metals. Present study showed that metal contents of loosely bonded ions, sulfide bonds and organometallic bonds are reduced after 90 days of plant cultivation. The overall removal trend of studied metals is Zn (16 %) > Cu (14 %) > Ni (11 %) > Pb (7 %) > Mn (6 %). The obtained results show that the anthropogenic portion of metals is reduced after the phytoremediation practice. For instance, the initial anthropogenic portion of Zn (55 %) is changed to 39 % showing an overall reduction of about 16 %. The anthropogenic portions of Cu, Ni, Pb and Mn are also reduced by 14, 11, 7 and 6 %, respectively.     

Sulfate Reduction and Sulfur Cycles at Two Seagrass Beds Inhabited by Cold Affinity <Emphasis Type="Italic">Zostera marina</Emphasis> and Warm Affinity <Emphasis Type="Italic">Halophila nipponica</Emphasis> in Temperate Coastal Waters

To evaluate the impact of invading seagrass on biogeochemical processes associated with sulfur cycles, we investigated the geochemical properties and sulfate reduction rates (SRRs) in sediments inhabited by invasive warm affinity Halophila nipponica and indigenous cold affinity Zostera marina. A more positive relationship between SRR and below-ground biomass (BGB) was observed at the H. nipponica bed (SRR = 0.6809 × BGB ? 4.3162, r ² = 0.9878, p = 0.0006) than at the Z. marina bed (SRR = 0.3470 × BGB ? 4.0341, r ² = 0.7082, p = 0.0357). These results suggested that SR was more stimulated by the dissolved organic carbon (DOC) exuded from the roots of H. nipponica than by the DOC released from the roots of Z. marina. Despite the enhanced SR in spring-summer, the relatively lower proportion (average, 20%) of acid-volatile sulfur (AVS) in total reduced sulfur and the strong correlation between total oxalate-extractable Fe (Fe_(oxal)) and chromium-reducible sulfur (CRS = 0.2321 × total Fe_(oxal) + 1.8180, r ² = 0.3344, p = 0.0076) in the sediments suggested the rapid re-oxidation of sulfide and precipitation of sulfide with Fe. The turnover rate of the AVS at the H. nipponica bed (0.13 day^?1) was 2.5 times lower than that at the Z. marina bed (0.33 day^?1). Together with lower AVS turnover, the stronger correlation of SRR to BGB in the H. nipponica bed suggests that the extension of H. nipponica resulting from the warming of seawater might provoke more sulfide accumulation in coastal sediments.     

Phytoremediation potential and morphological changes of plants growing in the vicinity of lead smelter plant

With the increasing industrialization, heavy metals concentration in soils has greatly increased. Phytoremediation is a low-cost, non-intrusive and aesthetically harmonious technology that uses plants to remediate contaminated sites by heavy metals. The aim of the study was to determine Cd, Pb and Zn concentration in the biomass of plant species growing on a multi-metal-contaminated site of lead smelter processing, to assess the workability of using these plants for phytoremediation purposes and highlight possible damage in morphological leaf changes. Two plant species, i.e., Ipomoea asarifolia and Urochloa decumbens and the associated soil samples were collected and analyzed Cd, Pb and Zn concentrations and then calculating the bioconcentration factor and translocation factor parameters for each element. Leaves and roots samples were observed by light microscopy. Metal concentrations varied greatly and majorly depend on site sampled, plant species and tissue. Cd, Pb and Zn in tissue ranged from 0 to 102.48, 0 to 381.04 and 12.84 to 295.02 mg Kg^?1. However, none of the plant showed potential for hyperaccumulation. Both plants showed bioaccumulation factor more than one, where it was 7.66 and 6.82 for Pb and Zn in U. decumbens, respectively. Translocation factor was calculated below one for both plants and all metals. Morphological studies revealed development of adaptive features that strengthen the U. decumbens to grow in contaminated soil. Our study suggests that I. asarifolia and U. decumbens have potential for phytostabilization at multi-metal-contaminated site.     

High-pressure phase transitions of CaRhO<Subscript>3</Subscript> perovskite

High-pressure phase transitions of CaRhO₃ perovskite were examined at pressures of 6–27 GPa and temperatures of 1,000–1,930°C, using a multi-anvil apparatus. The results indicate that CaRhO₃ perovskite successively transforms to two new high-pressure phases with increasing pressure. Rietveld analysis of powder X-ray diffraction data indicated that, in the two new phases, the phase stable at higher pressure possesses the CaIrO₃-type post-perovskite structure (space group Cmcm) with lattice parameters: a = 3.1013(1) Å, b = 9.8555(2) Å, c = 7.2643(1) Å, V _m  = 33.43(1) cm³/mol. The Rietveld analysis also indicated that CaRhO₃ perovskite has the GdFeO₃-type structure (space group Pnma) with lattice parameters: a = 5.5631(1) Å, b = 7.6308(1) Å, c = 5.3267(1) Å, V _m  = 34.04(1) cm³/mol. The third phase stable in the intermediate P, T conditions between perovskite and post-perovskite has monoclinic symmetry with the cell parameters: a = 12.490(3) Å, b = 3.1233(3) Å, c = 8.8630(7) Å, β = 103.96(1)°, V _m  = 33.66(1) cm³/mol (Z = 6). Molar volume changes from perovskite to the intermediate phase and from the intermediate phase to post-perovskite are –1.1 and –0.7%, respectively. The equilibrium phase relations determined indicate that the boundary slopes are large positive values: 29 ± 2 MPa/K for the perovskite—intermediate phase transition and 62 ± 6 MPa/K for the intermediate phase—post-perovskite transition. The structural features of the CaRhO₃ intermediate phase suggest that the phase has edge-sharing RhO₆ octahedra and may have an intermediate structure between perovskite and post-perovskite.