内蒙古中西部地区中小地震矩震级研究

基于S震相"S窗"内的波形信号识别、品质因子Q(f)和22个台站场地响应,利用2009~2016年3月内蒙古中西部地区地震的波形资料,反演了182次中小地震的震源波谱参数,得到这些小震的零频幅值及其拐角频率,据此计算了这些地震的地震矩M_0、矩震级M_W和应力降Δσ。利用回归分析方法得到了近震震级与矩震级、矩震级与应力降的关系式。分析表明,近震震级与矩震级、矩震级与应力降呈线性关系。可见,将矩震级纳入地震的快报与正式目录中,可以丰富地震观测报告内容,更好地为地震应急和地震科研服务。     

四川芦山7.0级地震前中小地震P轴方位角CV值的变化

通过对2003年1月1日—2013年4月1日芦山地震前震源区中小地震震源机制解的分析,发现不同阶段的震源机制解在一定程度上反映了强震孕育过程中构造应力场随时间的变化。震源区中小地震的P轴方位角C_V值在芦山M7.0地震发生前有一个上升-下降-上升的过程,只是相比于汶川8.0级地震前C_V值的下降-上升过程经历了更长的时间,这表明四川芦山M7.0地震的孕育经历了长时间的应力积累,与许多研究结果相一致。2007年1月1日—2014年4月1日C_V值空间分布的非均匀性特征在龙门山断裂带南段有显著的增强与减弱过程,对于发震地点可能有一定的指示意义。     

Alaska Tsunami Warning Center's automatic and interactive computer processing system

The Alaska Tsunami Warning Center has the responsibility of providing timely tsunami warning services for Alaska and the west coasts of Canada and the United States. Recently, the ATWC implemented a new microcomputer system which is used for both automatic and interactive earthquake processing, and for disseminating critical information to the Tsunami Warning System recipients.Real-time seismic wave form data from 23 short-period and 9 long-period sites in Alaska, the lower 48 States, and Hawaii, are continually computer-monitored for the occurrence of an earthquake. Once detected from the short-period wave form data, pre- and post-earthquake data are displayed on a graphics terminal along with an indicator to identify the time of the onset of theP waves (P-picks). TheP-picks can easily be changed during or after data collection via a mouse. Magnitudes (M _b ,M _l ,M _B ,M _S ) are automatically computed from appropriate short- and long-period wave form data concurrently with the above processing. A second graphics terminal displays cycle-by-cycle long-period wave form data that was used to compute an earthquake'sM _B andM _S magnitudes.An earthquake's parametric data and other information are available and printed within tens of seconds after theP wave arrivals are recorded at the first 5 sites, then 7 sites, 9 sites, and a final parametric computation using all collected data. Three video display monitors are used for displaying the parameters, procedural aids, and a map showing the epicenter. Additionally, selected event parameters are immediately transmitted by VHF radio to alphanumeric beepers which are carried by standby duty personnel during those times that the Center is not manned.Using a dedicated video display terminal and printer, the interactive system can use data and parameters resulting from the automatic processes for concurrent parameter recomputations; perform additional computations; disseminate critical information; and generate procedural aids for duty geophysicists to facilitate an earthquake/tsunami investigation.     

Am improved source mechanism for the 1935 Timiskaming,Quebec earthquake from regional waveforms

The Timiskaming earthquake, which occurred near the Quebec-Ontario border at the northwest end of the Western Quebec seismic zone in 1935, is one of the five largest instrumentally recorded southeastern Canadian earthquakes. Previous studies of this earthquake concentrated on modeling teismograms recorded at regional distances, a better constrained focal mechanism is obtained. The waveforms indicate thrust faulting on a moderately dipping northwest striking plane at a depth of 10 km. TheM _w of 6.1 determined in this study is in good agreement with previous magnitude estimates (m _b 6.1,M _s 6.0, andm _bLg 6.2–6.3). The focal mechanism is similar to those of many recent small to moderate earthquakes in the region, and the inferred (from theP axis) acting stress of northeast compression is consistent with the overall eastern North American stress field. The Lake Timiskaming Rift Valley in which the earthquake occurred, comprises several northwest striking faults consistent with the strike of the 1935 event. Thus, the 1935 earthquake appears to be a result of faulting on the reactivated Timiskaming graben.     

Dependence of the energy released during earthquake on ambient shear stress

Starting with dislocation model, using the result of the fracture mechanics: the slip displacement at the crack tip is proportional to the length of the crack and the applied ambient shear stressτ ₀ ² , we consider the dislocation in the earthquake to be the slip displacement at the crack tip and have obtained the analysis expresses of displacement and velocity pulse for the circular crack and have calculated the seismic wave energy radiated by earthquake. The seismic wave energyE ∞M ₀ τ ₀ ² f(v) _r , i. e.E is proportional to the seismic momentM ₀ and the square of the ambient shear stressτ ₀ ² and increases with the rupture velocityv _r . In frequency domain, integrating the square of source velocity spectrum derived from our the scaling law model, we have also obtained the seismic wave energyE released by earthquake and earthquake radiated effficiencyη.E ∞M ₀ τ ₀ ² also. If takingτ ₀ = 10.0 MPa, E=4.79M ₀. This result is consistent with the estimate by Vassiliou and Kanamori (1982). Theη=5.26%. The distribution of the seismic wave energy is that most of the energy contains in the frequency range between the first corner frequencyf _c1 and thirdf _c3, amount to 92.3% the energy in the rangef<f _c1 is about 3.85% and 3.85% whenf>f _c3. Thef _c3 is about 8Hz forM ⩾ 6, thus most of radiated energy is below 2Hz. This phenomenon had been verified by Vassiliou Kanamori. Previous results show the energy radiated by earthquake to be strongly dependent on ambient shear stress. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 146–152, 1993. This work was supported by the Deutsche Forschungsgemeinschaft, Bonn, F. R. Germany. The support is grateful acknowledged. The authors are also grateful to Professor Klussmann and Mr. Hasthoff for their lots of help.     

基于震源机制解的断层三维动画自动生成——以九寨沟7.0级、精河6.6级地震为例

基于震源机制解的断层三维动画自动生成系统以地震应急实际需求为导向,根据震源机制解提供的断层走向、倾角和滑动角,通过对断层模型进行三维建模,建立断层控制点的运动方程,利用动画自动生成技术,生成发震断层的三维演示动画。利用该系统制作了九寨沟7.0级、精河6.6级地震的三维运动动画。该系统自动产出的断层三维动画,可在地震应急期间为抗震救灾指挥部展示直观的断层运动过程,并且结合余震分布等信息可为震后趋势的判定提供科学依据,同时,可借助微博、微信等新媒体为社会公众提供更好的服务。     

Characteristics of seismic activity before the MS8.0 Wenchuan earthquake

The characteristics of spatio-temporal seismicity evolution before the Wenchuan earthquake are studied. The results mainly involve in the trend abnormal features and its relation to the Wenchuan earthquake. The western Chinese mainland and its adjacent area has been in the seismically active period since 2001, while the seismic activity shows the obvious quiescence of M≥?7.0, M≥?6.0 and M?≥5.0 earthquakes in Chinese mainland. A quiescence area with M?≥7.0 has been formed in the middle of the North-South seismic zone since 1988, and the Wenchuan earthquake occurred just within this area. There are a background seismicity gap of M?≥5.0 earthquakes and a seismogenic gap of M_L?≥4.0 earthquakes in the area of Longmenshan fault zone and its vicinity prior to the Wenchuan earthquake. The seismic activity obviously strengthened and a doughnut-shape pattern of M?≥4.6 earthquakes is formed in the middle and southern part of the North-South seismic zone after the 2003 Dayao, Yunnan, earthquake. Sichuan and its vicinity in the middle of the doughnut-shape pattern show abnormal quiescence. At the same time, the seismicity of earthquake swarms is significant and shows heterogeneity in the temporal and spatial process. A swarm gap appears in the M4.6 seismically quiet area, and the Wenchuan earthquake occurred just on the margin of the gap. In addition, in the short term before the Wenchuan earthquake, the quiescence of earthquake with M_L≥?4.0 appears in Qinghai-Tibet block and a seismic belt of M_L?≥3.0 earthquakes, with NW striking and oblique with Longmenshan fault zone, is formed.     

Seismic characteristics near the epicenter of the 1303 Hongtong M=8 earthquake, Shanxi Province and its implication

In this paper, we calculated the seismic pattern of instrumental recorded small and moderate earthquakes near the epicenter of the 1303 Hongtong M=8 earthquake, Shanxi Province. According to the spatial distribution of small and moderate earthquakes, 6 seismic dense zones are delineated. Temporal distribution of ML≥2 earthquakes since 1970 in each seismic dense zone has been analyzed. Based on temporal distribution characteristics and historical earthquake activity, three types of seismicities are proposed. The relationship between seismic types and crustal medium is analyzed. The mechanism of three types is discussed. Finity of strong earthquake recurrence is proposed. Seismic hazard in mid-long term and diversity of earthquake disaster in Shanxi seismic belt are discussed.     

新西兰2016年凯库拉MW7.8地震灾害考察与启示

在2016年新西兰凯库拉M_W 7.8地震中,北东—北东东向科科仁古断裂水平右旋位移量最大,为10—12m;北北西—近南北向帕帕提断裂垂直位移量最大,达到5—6m。对直接坐落在这2条地震地表破裂带或变形带之上的建筑物的破坏现场调查表明,尽管房屋出现歪斜,但上部主体部分基本完整,没有出现倒塌或部分倒塌现象,避免了人员伤亡。在无法回避活动断裂及其大震危险性的情况下,隔震系统的广泛采用可以有效地提高建筑物抵御地震灾害的能力。此次地震触发了数万个滑坡体,最大滑坡体可达数百万立方米。对沃罗村北边2处边坡失稳地带的考察结果表明,针对该地至少从2个方面进行了考虑和处置:一是在选址上,避开了突出山嘴等高陡坡地带;二是在房屋正对的山坡地带,种植或保护了茂密的树木,这既增加了山体的稳定性,又可以在地震中有效地减缓崩塌的石块对房屋的冲击。对比中国中东部一些大震,如1976年唐山7.8级地震和2008年汶川8.0级地震中触目惊心的巨大人员伤亡和财产损失,即使在人口密度与滑坡规模上存在明显不同,对新西兰凯库拉地震灾害现场的考察结果,还是在如何有效抵御地震灾害方面给我们提供了很好的启示。     

芦山地震和九寨沟地震台站实测震级差异性分析

本文选取2013年芦山地震和2017年九寨沟地震波形,重新量取垂直向振幅,计算宽频带面波震级M_S（BB）,分析各台站实测震级出现方向性差异的原因。其中,通过572个宽频带台站实测芦山地震震级M_S（BB）7.1,通过603个宽频带台站实测九寨沟地震震级M_S（BB）6.9。芦山地震实测震级大于M_S（BB）7.3的台站呈现WN-ES向分布,与断层倾向一致;实测震级小于M_S（BB）7.0的台站呈现NE-WS向分布,与其所在断层走向一致。九寨沟地震实测震级大于M_S（BB）7.0的台站分布呈现NE向分布,与断层倾向一致;实测震级小于M_S（BB）6.8的台站总体分布较为离散,大体呈现NW-SE向分布,与树正断裂走向一致。实测震级偏大的台站方向性分布与多普勒效应和P波辐射花样联系不明显。对比分析芦山地震和九寨沟地震,去除场地响应和仪器自身影响,台站实测震级差异性仍然存在,因此,台站实测震级差异性是由于受到了多普勒效应、辐射花样、仪器和场地响应之外的因素影响。综合考虑地震震级涉及的影响因素,芦山地震和九寨沟地震的台站实测震级差异性可能与地震波的传播路径有关。     

Characteristics of earthquake ground motions and the H/V of microtremors in the southwestern part of Taiwan

The relationships between the spectral characteristics of earthquake ground motions and those of micro‐tremors are investigated using the observed data from a dense strong‐motion network consisting of 108 stations in the Yun‐Li, Chia‐Yi and Tai‐Nan areas in southwestern Taiwan. Many high‐quality recordings, including those of the 921 Chi‐Chi earthquake (M_w=7.6), the 1022 Chia‐Yi mainshock (M_L=6.4), the 1022 major aftershock (M_L=6.0), as well as some weak motion events are selected to evaluate site responses. Microtremor measurements are also performed at most ground motion stations. With many stations in the area located on an alluvium structure, however, it is difficult to find good reference stations on rock sites, which therefore necessitates the calculation of single‐station H/V ratios. The predominant frequencies obtained from H/V ratios are consistent with those from spectral ratios. The site characteristics between the strong and weak events are different, however. This implies that a nonlinear effect probably occurred with the strong‐motion events. The main peak in the H/V spectra of the microtremors is in good agreement with the first peak obtained from the spectra of earthquake ground motions. It is reasonable to claim that the main peak reflects the deep underground structure. On the basis of the H/V ratios of the microtremors, it is concluded that the lower predominant frequencies appear in the plain area, while the higher values are near the mountainous region. Copyright © 2002 John Wiley & Sons, Ltd.     

Study of the Q -value in and around Minle Basin

The digital seimograph network set up by China and France in Zhangye of China had been operated in 1988. The Zhangye network is situated in the middle segment of Hexi corridor and Qilina mountain, which was regarded as a monitoring earthquake area. Using the records of Zhangye digital network theQ-values in and around Minle basin have been measured. The results of this study showed that theQp-values range from 500 to 780, andQs-values range from 230 to 460. TheQ-values of inside of Minle basin are higher than that around the basin. The greater parts of moderate and strong earthquakes occurred along tectonic belts around the Minle basin. Moreover, TheQ-values increased with the depth of penctration of wave ray. The attenuation of S wave is stronger than P wave in shallow layer of crust. Some problems ofQ-value change versus time before and after Sunan eathquake (M _s=5.7) have been also disscussed. These results can be applied to study and to monitor seismic danger of the Minle monitoring area. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 296–302, 1993.     

Stability of premonitory seismicity pattern and intermediate-term earthquake prediction in Central Italy

The algorithm CN makes use of normalized functions. Therefore the original algorithm, developed for the California-Nevada region, can be directly applied, without adjustment of the parameters, to the determination of the Time of Increased Probability (TIP) of strong earthquakes for Central Italy. The prediction is applied to the events with magnitudeMM ₀=5.6, which in Central Italy have a return period of about six years. The routinely available digital earthquake bulletins of the Istituto Nazionale di Geofisica (ING), Rome, permits continuous monitoring. Here we extend to November 1994 the first study made by Keilis-Boroket al. (1990b). On the basis of the combined analysis of seismicity and seismotectonic, we formulate a new regionalization, which reduces the total alarm time and the failures to predict, and narrows the spatial uncertainty of the prediction with respect to the results ofKeilis-Borok et al. (1990b).The premonitory pattern is stable when the key parameters of the CN algorithm and the duration of the learning period are changed, and when different earthquake catalogues are used.The anlysis of the period 1904–1940, for whichM ₀=6, allows us to identify self-similar properties between the two periods, in spite of the considerably higher seismicity level of the earlier time interval compared with the recent one.     

2014年金寨ML3.9震群序列遗漏地震检测及发震构造分析

针对2014年8月-2015年1月安徽金寨发生的ML3.9震群,利用匹配滤波技术补充台网目录遗漏的地震事件,再利用波形互相关震相检测技术标定P波和S波到时,进一步采用双差定位方法对震群进行重定位,结合震源机制解等分析此次震群活动可能的发震构造.计算结果显示,通过互相关扫描检测到1376个地震台网常规分析遗漏的地震,数量...     

尾波持续时间比τH/τV 在强震短临预报中的应用

本文根据Aki等人提出的尾波理论,导出了地方震尾波水平分量与垂直分量的持续时间比的具体表达式: τ_H/τ_V=I_H/I_V(Q_H/Q_V)~(1/4)·B_H/B_V。该式表明,τ_H/τ_V的变化主要反映了震源体一定范围内,由于介质的各向异性而引起的尾波在不同方向上的激发及衰减能力的差异。本文还讨论了地震前τ_H/τ_V短临异常的物理机制,认为异常的产生与孕震期间介质内裂隙的出现和闭合有关。1986年门源6.4级地震和1975年海城7.3级地震前,τ_H/τ_V都有不同程度的短期低值异常及临震高值突跳。门源地震前后门源台记录的直达S波的最大振幅比A_(mH)/A_(mv)也有与尾波持续时间比类似的异常。最后通过对一些震例的分析,初步得到震级与异常时间的关系为M=0.657lnT+3.44。     

Characteristics of ambient stress values for micro－earthquake sequences in Western Yunnan Earthquake Prediction Experimental Field

Ｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆａｍｂｉｅｎｔｓｔｒｅｓｓｖａｌｕｅｓｆｏｒｍｉｃｒｏ－ｅａｒｔｈｑｕａｋｅｓｅｑｕｅｎｃｅｓｉｎＷｅｓｔｅｒｎＹｕｎｎａｎ　Ｅａｒｔｈｑｕａｋｅ　Ｐｒｅｄｉｃｔｉｏｎ　Ｅｘｐｅｒｉｍｅｎｔａｌ　ＦｉｅｌｄＪｉａ－Ｚ...     

Evaluation of the seismic moment of the April 20, 2013 Lushan earthquake

The April 20, 2013 Lushan earthquake which occurred in Sichuan, China had only moderate thrust. However, the computed seismic moments (M ₀) for the Lushan earthquake calculated by several institutions differ significantly from 0.4 × 10¹⁹ to 1.69 × 10¹⁹ Nm, up to four times difference. We evaluate ten computed M ₀s by using normal mode observations from superconducting gravimeters in Mainland China. We compute synthetic normal modes on the basis of moment tensor solutions and fit them to the observed normal modes. Comparison of our results indicates that M ₀ is the main cause for some large differences between observations and synthetics. We suggest that a moment magnitude of M _w6.6, corresponding to a M ₀ of 0.97–1.08 × 10¹⁹ Nm, characterizes the size and strength of the seismic source of the Lushan earthquake.     

1995年永登地震山体变形计算机模拟与机理分析

1995年甘肃永登5．8级地震引起了黄土山梁的酥裂震陷，说明黄土在较小震级下也会有失稳现象．利用三维土体的有限元计算方法，对永登地震山体变形进行了计算机模拟，并定量地分析了变形的机理。     

云南漾濞6.4级地震强地面运动三要素基本特征分析

2021年5月21日云南漾濞发生6.4级地震,中国数字化强震动观测网络在主震中捕获28组加速度数据。对84条三分向加速度记录进行常规处理,计算出对应的地震动参数,并绘制震中附近水平向PGA和PGV等值线图,结果显示其走向和形态与震后烈度调查结果相近。将实际观测的相对持时进行曲线回归,求得相关系数,并据此计算出T_d(5%～95%)持时对应的震源持续时间在10.22～13.06 s间,与震源破裂过程反演结果基本一致。再通过分析近场6个台站记录的加速度反应谱,并与抗震设计谱比较,总结此次地震的频谱特性,为该区域抗震设防提供参考依据。     

2022门源MS6.9地震地表破裂带震害特征调查

2022年1月8日,青海省海北藏族自治州门源县发生M_S6.9地震,震中位于青藏高原东北缘地区祁连—海原断裂带的冷龙岭断裂和托勒山断裂构造转换区域(37.77°N,101.26°E)。震后野外现场考察结果表明,此次地震形成的同震地表破裂带总长度约为26 km,整体走向NWW向,破裂性质以左旋走滑局部逆冲为主。断层错动造成的破坏形式以雁列式组合的张裂隙、张剪裂隙、挤压鼓包、断层陡坎等为主。其中,道河至硫磺沟段地表破裂最为强烈,规模大且连续性好,造成的震害最为显著,地表破裂规模向东、西两端逐渐衰减。破裂带穿过区域内多条河流,造成显著的冰面破裂变形,并沿河岸形成一系列的边坡崩塌、滚石等地质灾害。综合破裂带及震害规模分析,宏观震中位于道河至硫磺沟地区。