Miocene to Quaternary deformation in NE Slovenia: complex paleomagnetic and structural study

Combined paleomagnetic and structural research was carried out in the Mura-Zala Basin including the western and southern surrounding hills in northeastern Slovenia. The Mura-Zala Basin was formed due to ENE–WSW trending crustal extension in the late Early Miocene (18.3–16.5 Ma). First, marine sedimentation took place in several more or less confined depressions, then in a unified basin. During thermal subsidence in the late Miocene deltaic to fluvial sediments were deposited. After sedimentation, the southernmost, deepest depression was inverted. Map-scale folds, reverse and strike-slip faults were originated by NNW–SSE compression. This deformation occurred in the latest Miocene–Pliocene and is reflected also in the magnetic fabric (low field susceptibility anisotropy). After this folding, the Karpatian sediments of the Haloze acquired magnetization, then suffered 30° counterclockwise rotation relative to the present north (40° counterclockwise with respect to stable Europe). This Pliocene (Quaternary?) rotation affected a wide area around the Mura-Zala Basin. The latest Miocene to Quaternary folding and subsequent rotation may be connected to the counterclockwise rotation of the Adriatic microplate.     

Late Quaternary deformation on the island on Pantelleria: New constraints for the recent tectonic evolution of the Sicily Channel Rift (southern Italy)

Structural observations carried out on the volcanic Island of Pantelleria show that the tectonic setting is dominated by NNE trending normal faults and by NW-striking right-lateral strike-slip faults with normal component of motion controlled by a ≈N 100°E oriented extension. This mode of deformation also controls the development of the eruptive fissures, dykes and eruptive centres along NNE–SSW belts that may thus represent the surface response to crustal cracking with associated magma intrusions. Magmatic intrusions are also responsible for the impressive vertical deformations that affect during the Late Quaternary the south-eastern segment of the island and producing a large dome within the Pantelleria caldera complex. The results of the structural analysis carried out on the Island of Pantelleria also improves the general knowledge on the Late Quaternary tectonics of the entire Sicily Channel. ESE–WNW directed extension, responsible for both the tectonic and volcano-tectonic features of the Pantelleria Island, also characterizes, at a greater scale, the entire channel as shown by available geodetic and seismological data. This mode of extension reactivates the older NW–SE trending fault segments bounding the tectonic troughs of the Channel as right-lateral strike-slip faults and produces new NNE trending pure extensional features (normal faulting and cracking) that preferentially develop at the tip of the major strike-slip fault zones. We thus relate the Late Quaternary volcanism of the Pelagian Block magmatism to dilatational strain on the NNE-striking extensional features that develop on the pre-existing stretched area and propagate throughout the entire continental crust linking the already up-welled mantle with the surface.     

Ar–Ar ages and geochemistry of the basaltic shield stage of Tenerife, Canary Islands, Spain

We report the first ³⁹Ar–⁴⁰Ar ages from the three early basic shield-like massifs of Tenerife, Canary islands, and couple these with detailed major and trace element chemistry to constrain the nature and timing of the mantle melting processes. The massifs have chemically different sources, and independent evolutionary histories. The Teno and Roque del Conde massifs appear chemically to represent the products of single mantle melting cycles, with progressive decrease in mean melt fraction and increase in mean melting depth in younger rocks. The Teno massif (NW) was erupted in a short time period around 6.0–6.4 Ma, while at least the lower half of the Roque del Conde massif (SW) is older than 11 Ma. In contrast, the Anaga massif (NE) is polygenetic, with ³⁹Ar–⁴⁰Ar ages ranging from 8.0–4.2 Ma, and no simple stratigraphic chemical progression. These ages run counter to published suggestions of progressive younging of Canary shield stages to the southwest. Basic rocks in all three massifs are the result of much deeper melting and smaller melt fractions than equivalent units in Gran Canaria, but nevertheless the melting column must have extended significantly into the spinel facies, requiring substantial disruption of the local lithosphere. The age and melting relationships broadly support the mantle blob model for Canary magmatism proposed by Hoernle and Schmincke (Hoernle, K., Schminke, H.-U., 1993. The role of partial melting in the 15-Ma geochemical evolution of Gran Canaria: a blob model for the Canary hotspot. J. Petrol. 34, 599–626). In all three massifs, extensive fractional crystallisation has taken place at crustal levels so that mean MgO contents are only some 6–7%. The fractionation sequence is olivine–clinopyroxene–magnetite in basaltic compositions, with the involvement of plagioclase, amphibole and apatite only to generate the infrequent more evolved hawaiites to benmoreites. Despite the abundance of basanitic magmas in the Tenerife older massifs, these follow a differentiation trend towards weakly undersaturated benmoreite rather than to phonolite. This probably reflects early crystallisation of magnetite, perhaps resulting from somewhat high oxygen fugacity. The chemical evidence for replenished magma chambers in Tenerife described by Neumann et al. (Neumann, E.R., Wulff-Oedersen, E., Simonsen, S.L., Pearson, N.J., Martí, J., Mitjavila, J., 1999. Evidence for fractional crystallisation of periodically refilled magma chambers in Tenerife, Canary Islands. J. Petrol. 40, 1089–1123) is a consequence of treating as a single cogenetic suite the products of several magmatic systems that differ in parental melt fraction.     

Crustal shear-wave splitting in the epicentral zone of the 2001 Mw 7.7 Bhuj earthquake, Gujarat, India

We report here crustal shear-wave anisotropy, ranging from 1% to 10.76% with an average of 2.4% in the aftershock zone of the 2001 Bhuj earthquake, Gujarat, India, from a study of leading shear-wave polarization directions (LPSDs), which vary on average from NNW–SSE to E–W with a delay of 0.07–0.14 s. The delays in the NNW–SSE to NE–SW directions observed at seven stations, near the seismogenic fault, suggest cracks parallel to the direction of the maximum horizontal regional compressional stress prevailing in the region, suggesting a dilatancy-induced anisotropy resulting from approximately stress-aligned parallel vertical micro-cracks. In contrast, the LPSDs at Ramvav, Rapar and Vondh stations, away from the seismogenic fault, are fault parallel, approximately E–W and almost orthogonal to the stress-aligned polarizations inferred elsewhere. The maximum average time delay of 0.14 s is observed at Lodai, where the fast polarization direction is found to be N338°W. This has been observed from anisotropic poro-elastic (APE) modelling and observations that these are 90° flips in shear-wave polarization, resulting from propagation through micro-cracks containing fluids at critically high pore-fluid pressure surrounding the hypocenter of the 2001 mainshock. The presence of high pore-fluid pressure in the seismogenic fault zone could also explain the observed scatter in shear-wave time delays. Further, the coincidence of the N–S trending intrusive bodies (as inferred from tomographic studies in the area) with the N–S direction of regional maximum horizontal compressional stress supports the interpretation of stress-aligned vertical extensive-dilatant anisotropic (EDA) cracks. The depth distribution of the estimated anisotropy (1–10.76%), b-values and stress drop values suggests an increase at 18–30 km depths, which could be attributed to high pore-fluid pressures resulting from a fluid-filled fractured rock matrix or open micro-cracks (characterized by high crack density and high porosity) coinciding with a low velocity zone (at 18–30 km depths) as delineated from tomographic studies in the area.     

Emplacement and arrest of sheets and dykes in central volcanoes

Sheet intrusions are of two main types: local inclined (cone) sheets and regional dykes. In Iceland, the inclined sheets form dense swarms of (mostly) basaltic, 0.5–1 m thick sheets, dipping either at 20–50° or at 75–90° towards the central volcano to which they belong. The regional dykes are (mostly) basaltic, 4–6 m thick, subvertical, subparallel and form swarms, less dense than those of the sheets but tens of kilometres long, in the parts of the volcanic systems that are outside the central volcanoes. In both types of swarms, the intrusion intensity decreases with altitude in the lava pile. Theoretical models generally indicate very high crack-tip stresses for propagating dykes and sheets. Nevertheless, most of these intrusions become arrested at various crustal depths and never reach the surface to supply magma to volcanic eruptions. Two principal mechanisms are proposed to explain arrest of dykes and sheets. One is the generation of stress barriers, that is, layers with local stresses unfavourable for the intrusion propagation. The other is mechanical anisotropy whereby sheet intrusions become arrested at discontinuities. Stress barriers may develop in several ways. First, analytical solutions for a homogeneous and isotropic crust show that the intensity of the tensile stress associated with a pressured magma chamber falls off rapidly with distance from the chamber. Thus, while dyke and sheet injection in the vicinity of a chamber may be favoured, dyke and sheet arrest is encouraged in layers (stress barriers) at a certain distance from the chamber. Second, boundary-element models for magma chambers in a mechanically layered crust indicate abrupt changes in tensile stresses between layers of contrasting Young’s moduli (stiffnesses). Thus, where soft pyroclastic layers alternate with stiff lava flows, as in many volcanoes, sheet and dyke arrest is encouraged. Abrupt changes in stiffness between layers are commonly associated with weak and partly open contacts and other discontinuities. It follows that stress barriers and discontinuities commonly operate together as mechanisms of dyke and sheet arrest in central volcanoes.     

Gabbroic xenoliths from La Palma, Tenerife and Lanzarote, Canary Islands: evidence for reactions between mafic alkaline Canary Islands melts and old oceanic crust

Gabbroic and hornblendite xenoliths from La Palma, Tenerife and Lanzarote fall into three main groups based on petrography and chemistry. One group (comprising all xenoliths from Lanzarote and some from La Palma) consists of highly deformed orthopyroxene-bearing gabbroic rocks that show a strong affinity to N-MORB and oceanic gabbro cumulates in terms of mineral chemistry and REE relations. However, they show mild enrichment in the most incompatible elements (particularly Rb+Ba±K) relative to intermediate and heavy REE, and their Sr–Nd isotope ratios fall within or close to the N-MORB field. The second group (60% of the xenoliths from La Palma) are gabbroic cumulates with zoned clinopyroxenes (Ti–Al-poor cores, Ti–Al-rich rims) and reaction rims of hornblende, biotite and clinopyroxene on other phases. Their trace-element and Sr–Nd isotope relations are in general transitional between N-MORB cumulates and Canary Islands alkali basalts, but they show strong enrichment in Rb, Ba and K relative to other strongly incompatible elements. The third group (comprising some xenoliths from La Palma and all those from Tenerife) are undeformed gabbroic and hornblendite rocks in which hornblende and biotite appear to belong to the primary assemblage. These rocks show strong affinities to Canary Islands alkali basaltic magmas with respect to mineral, trace-element, and Sr–Nd isotope chemistry. The first two groups are interpreted as fragments of old oceanic crust which have been mildly to strongly metasomatized through reactions with Canary Islands alkaline magmas. The reaction process is a combination of enrichment in elements compatible with biotite (and hornblende), and simple mixing between N-MORB cumulates and trapped alkaline magmas. The third group represents intrusions/cumulates formed from mafic alkaline Canary Islands magmas. Modeling indicates that locally up to 50% new material has been added to the old oceanic crust through reactions with ocean island basalts. Reactions and formation of cumulates do not represent simple underplating at the mantle/crust boundary, but have taken place within the pre-existing oceanic crust, and are likely to have significantly thickened the old oceanic crust.     

A new chronostratigraphical and evolutionary model for La Gomera: Implications for the overall evolution of the Canarian Archipelago

A review of the general volcano-stratigraphy and geochronology of La Gomera, one of the lesser known Canary Islands, has led to the establishment of a new evolutionary model. The oldest edifice corresponds to the submarine stage built up between 20 and 15 Ma. The construction of the Submarine Edifice was followed by an important break in the activity (about 4 Ma) and deep erosion of the edifice. About 10.5 Ma ago, the main present-day edifice (the Old Edifice 10.5–6.4 Ma) emerged, which was also submarine in its initial phases. Two different main stages are distinguishable. The first stage was represented by a large, some 22 km wide basaltic shield volcano (the Lower Old Edifice). Several lateral collapse events (Tazo and San Marcos avalanches) occurred during this time and were responsible for the removal of an important part of its northern flank. In the second growth stage (the Upper Old Edifice), the activity migrated southwards. A 25-km wide composite volcano arose covering part of the remaining earlier shield volcano. The felsic (trachytic to phonolitic) activity occurring in two separate episodes formed a significant component of this composite volcano. Finally, one more recent large edifice (the Young Edifice) built up from 5.7 to 4 Ma. The lava flows of this younger edifice covered completely the centre and the south of the island and filled deep ravines in the north. More evolved magmas, including significant felsic magmas (the third and last felsic episode), occurred in this phase of activity.The growth of La Gomera was long-lasting, separated by an important gap in the activity in the Middle Miocene, with no Quaternary activity at all. At the same time on Tenerife (the nearest island east of La Gomera), three large edifices grew separately: Roque del Conde, Anaga and Teno (initially three separated islands). From the available data, it is inferred that the subaerial activity started earlier in the Roque del Conde Edifice, then on La Gomera and later in Teno in the NW and Anaga in NE of Tenerife, which is the youngest of all these edifices. These facts, together with the irregular general progress of the volcanic activity, support more complex views of the genesis for the Canary Islands than the simple hotspot model.     

Rift zone reorganization through flank instability in ocean island volcanoes: an example from Tenerife, Canary Islands

The relationship between rift zones and flank instability in ocean island volcanoes is often inferred but rarely documented. Our field data, aerial image analysis, and ⁴⁰Ar/³⁹Ar chronology from Anaga basaltic shield volcano on Tenerife, Canary Islands, support a rift zone—flank instability relationship. A single rift zone dominated the early stage of the Anaga edifice (~6–4.5 Ma). Destabilization of the northern sector led to partial seaward collapse at about ~4.5 Ma, resulting in a giant landslide. The remnant highly fractured northern flank is part of the destabilized sector. A curved rift zone developed within and around this unstable sector between 4.5 and 3.5 Ma. Induced by the dilatation of the curved rift, a further rift-arm developed to the south, generating a three-armed rift system. This evolutionary sequence is supported by elastic dislocation models that illustrate how a curved rift zone accelerates flank instability on one side of a rift, and facilitates dike intrusions on the opposite side. Our study demonstrates a feedback relationship between flank instability and intrusive development, a scenario probably common in ocean island volcanoes. We therefore propose that ocean island rift zones represent geologically unsteady structures that migrate and reorganize in response to volcano flank instability.Editorial responsibility: T. DruittThis revised version was published online in February 2005 with typographical corrections and a changed wording.     

The French Guyana doleritic dykes: geochemical evidence of three populations and new data for the Jurassic Central Atlantic Magmatic Province

A petrographic and geochemical study of 15 Early Jurassic and 7 Proterozoic dolerites of French Guyana, and of one Jurassic dolerite from Ivory-Coast were carried out. The Early Jurassic SSW-NNE trending dykes have doleritic aphyric or gabbroic phyric texture. Their chemical compositions, slightly under-saturated to over-saturated, show moderate to low Mg-ratios (63–36), high TiO₂ contents (1.85–3.56 wt.%), weak rare earth element fractionation [1.8<(La/Yb)_n <4.6], negative Sr-anomalies (0.41<Sr* <0.91) and positive TiO₂-anomalies (1.2<TiO₂*<2.15). They correspond to sub-alkaline high-Ti basalts (HTiB). The La/Nb ratio (1.18±0.23) is close to that of the OIB-type Deccan basalts and incompatible element ratios: Rb/Nb_n (1.07±0.3), Zr/Y (4.6±0.8) are intermediate between those of HTiB in Deccan and those of HTiB in Paraná. These geochemical signatures and recent isotopic data of Bertrand et al. [Bertrand, H., Liegeois, J.P., Deckart, K., Féraud, G., 1999. High-Ti tholeiites in Guinea and Their Connection with the Central Atlantic CFB Province: Elemental and Nd-Sr-Pb Isotopic Evidence for Preferential Zone of Mantle Upwelling in Cause of Rifting. AGU spring meeting (Abst. p 317)] suggest that their magmatic source is different from that of the other basalts of the Central Atlantic Magmatic Province (CAMP). Such signatures are restricted to a central zone coinciding with the Panafrican Rokelides suture. We propose a model of sub-lithospheric preferential channelling of an asthenospheric ascent in this zone. Two other groups of dykes were identified in French Guyana. Compared to the Jurassic ones the Proterozoic dykes have NNW-SSE and E-W trending direction, more important LILE enrichment, low TiO₂ contents (<2 wt%) and Nb–Ta negative anomalies. Their calc-alkaline signature could be the result of a previous subduction and may be related to the 1800 Ma Venturi-Tapajós event, which contaminated the mantle source.     

Chronicle of the 1865, NE flank eruption of Mt. Etna and geomorphologic survey of the Mts. Sartorius area

The row of pyroclastic cones named Mts. Sartorius, outcropping on the NE flank of Etna, formed in 1865 during a lateral eruption that lasted about 6 months. The event was eye witnessed and described by numerous scientists and reporters. In this work, we use their observations to reconstruct the eruption chronology and scenario, and carry out a detailed geomorphologic survey to identify the eruptive features and pyroclastic deposits. The 1865 eruption began on 29 January along a segment of the main system of fractures oriented ENE–WSW, radial to the central conduit. After 30 January, a secondary system of fractures trending NNW–SSE was simultaneously active. The six larger Mts. Sartorius cones developed since 3 February along the lower extension of the radial system. They are markedly asymmetric due to the persistent winds blowing at the time and to the pre-existing topography formed on underlying deposits, previously unreported, that we have recognized. Now, about 150 years after the eruption, most of the eruptive vents and fractures are no longer observable in the field, being mostly hidden by products of subsequent phases of the eruption and by younger epiclastic deposits.     

Growth and evolution of an emergent tuff cone: Considerations from structural geology, geomorphology and facies analysis of São Roque volcano, São Miguel (Azores)

The syn-eruptive and post-eruptive history of São Roque tuff cone, its geological setting and volcanological features were studied in detail to understand the role played by the different factors that contributed to the morphological evolution of this relatively simple and small volcanic edifice.In addition, attention was also focused on the series of natural changes that affected the tuff cone during the course of the years and that finally led to its structural disassembly. A novel model is proposed to explain this process.The São Roque volcanic centre, located on the island of São Miguel (Azores), consists of two well-consolidated bodies and numerous small islets that formed more than 4700 years ago during the hydromagmatic activity that took place along an intruding dyke, whose NNW–SSE trend is in agreement with the regional tectonic pattern. The eruptive vents probably migrated progressively from SSE to NNW, forming small edifices through the rapid accumulation of sediments during alternating phases of “dry” and “wet” magmatic emissions. Syn-eruptive partial collapses greatly modified the original morphological structure of these edifices, probably allowing sea water to continuously flow into the vents. The complex interaction of these factors controlled the depth of magma fragmentation, producing different types of deposits, in which the ash-lapilli ratio varies considerably. The high-water saturation degree of these deposits caused syn-eruptive and post-eruptive remobilization which resulted in collapses and some small-scale landslides.Post-eruptive, WNW–ESE trending transtensional and extensional tectonic activities operated during the initial dissection of the cone, generating instability. Furthermore, the rapid accumulation of “wet” tephra, and its following consolidation, caused selective collapses that favoured the fragmentation of the deposit and caused the formation of numerous islets separated by radially-arranged channels. Collapses also involved the lava units emplaced in more recent times around the tuff cone, which show that brittle deformation has been significant in the area for a prolonged period.     

Strymon and Strymonikos Gulf basins (Northern Greece): Implications on their formation and evolution from faulting

In Central and Eastern Macedonia of Northern Greece large NW–SE trending basins filled up mainly with terrestrial sediments developed during the Neogene over the Alpine basement rocks. Among them, the Strymon basin was established along the NNW–SSE trending Strouma/Strymon Lineament which formed over the tectonic boundary of the Serbomacedonian and Rhodope massifs, both representing the hinterland of the Hellenic orogen. The present study suggests that the Strymon basin was not formed as a syn-detachment basin over the Strymon Valley Detachment Fault, considered to have caused exhumation of the Rhodope massif metamorphic complex. Instead, transpressional s.l. tectonics dominated the region in the Late Oligocene-Early Miocene and it progressively changed into a wrench tectonics under which the Strymon basin has been initiated in the Middle Miocene. The basin continued to develop further under a short-lived NW–SE extension in the Middle-Late Miocene. The whole deformation is attributed to the late-stage collisional processes between the Apulia and Eurasia plates. The prevalent NE–SW extension has been constrained later on in the Late Miocene and Pliocene times activating both low-angle and high-angle NW–SE trending faults and causing the regional tilting towards the SW of the mountain fault blocks (i.e., mountain chains). From Quaternary onwards, the Strymon basin has been separated from the Strymonikos Gulf basin due to an N–S extension that mainly activates E–W striking normal faults.     

Petrology of Philippine geothermal systems and the application of alteration mineralogy to their assessment

Philippine geothermal systems occur in the vicinity of large Holocene calc-alkaline volcanic complexes. Wells drilled in these areas encountered multiple intrusions; the latest dikes are the subsurface manifestations of the youngest heat source. Commonly, at least two hydrothermal regimes are juxtaposed in a single area, with the latest being in equilibrium with the present temperature and chemical regime.Alteration by neutral-pH water is pervasive and abundant. A contact-metamorphic aureole also occurs near intrusives. Alteration due to acid-sulfate fluids is generally confined to permeable structures. Neutral-pH alteration is divided into four zones on the basis of key clay minerals, and two subzones are defined by calc-silicates. These are the smectite (ambient to 180°C), transition (180–230°C), illite (230–320°C) and biotite (270–340°C) zones. Subzones are defined by epidote (250–340°C) and amphibole (280–340°C). The four main zones of acid alteration are: kaolinite (ambient to 120°C), dickite ± kaolinite (120–200°C), dickite ± pyrophyllite (200–250°C), and pyrophyllite ± illite (230–320°C). Where relict high-temperature alteration reaches the surface, the area being drilled is usually the outflow zone of the present system.These hydrothermal mineral assemblages are used: (1) as geothermometers; (2) to assist in determining the depth at which the production casing will be set during drilling; (3) to estimate fluid pH and other chemical parameters; (4) to predict possible corrosion and scaling tendencies of the fluids; (5) as a measure of permeability and possible cold water influx into wells; (6) as a guide to field hydrology; and (7) to estimate roughly the thickness of the eroded overburden.     

Inferences on the main volcano-tectonic structures at Mt. Etna (Sicily) from a probabilistic seismological approach

We analysed earthquakes at Mt. Etna for the period 1983–1991 using a method that weights uncertainties in hypocentral location. Three-dimensional distributions of hypocentral probability and energy density were studied, and two first-order volcano-tectonic structures identified. The first, on the northern and western sides, is roughly NE–SW oriented, and strongly marks the northernmost limit of earthquake occurrences in the volcano region; the second, NNW–SSE trending, affects the south-eastern flank of the volcano, and is evidence for an almost aseismic uprise of magma along it. Both structures fit well with the geodynamic framework of eastern Sicily. On the contrary, there is no evidence for a main magma chamber, as postulated in the literature.     

Seismic expression of active extensional faults in northern Umbria (Central Italy)

This paper deals with the geometry and kinematics of the active normal faults in northern Umbria, and their relationship with the seismicity observed in the area. In particular, we illustrate the contribution of seismic reflection data (a network of seismic profiles, NNW–SSE and WSW–ENE trending) in constraining at depth the geometry of the different active fault systems and their reciprocal spatial relationships. The main normal fault in the area is the Alto Tiberina fault, NNW trending and ENE dipping, producing a displacement of about 5 km, and generating a continental basin (Val Tiberina basin), infilled by up to 1500 m with Upper Pliocene–Quaternary deposits. The fault has a staircase trajectory, and can be traced on the seismic profiles to a depth of about 13 km. A set of WSW-dipping, antithetic faults can be recognised on the profiles, the most important of which is the Gubbio fault, bordering an extensional Quaternary basin and interpreted as an active fault based on geological, geomorphologic and seismological evidence. The epicentral distribution of the main historical earthquakes is strictly parallel to the general trend of the normal faults. The focal mechanisms of the major earthquakes show a strong similarity with the attitude of the extensional faults, mapped at the surface and recognised on the seismic profiles. These observations demonstrate the connection between seismicity in the area and the activity of the normal faults. Moreover, the distribution of the instrumental seismicity suggests the activity of the Alto Tiberina fault as the basal detachment for the extensional tectonics of the area. Finally, the action of the Alto Tiberina fault was simulated using two dimensional finite element modelling: a close correspondence between the concentration of shear stresses in the model and the distribution of the present earthquakes was obtained.     

Ar–Ar geochronology of Santo Antão, Cape Verde Islands

Santo Antão, the northernmost island of the Cape Verde Archipelago, consists entirely of silica-undersaturated volcanic products and minor intrusions. ⁴⁰Ar–³⁹Ar incremental heating experiments have been carried out on 24 samples that cover the entire exposed chronological sequence. The oldest lavas (7.57±0.56 Ma), representing an older volcanic basement, are exposed about 620 m above mean sea level. After an interval of quiescence of up to 4.3 Ma the volcanic activity resumed and continued at low eruption rates. The older basement is unconformably overlain by a ca. 810-m-thick lava sequence that spans an age range from 2.93±0.03 to 1.18±0.01 Ma. This sequence is cut by many dykes and sills. Simultaneous volcanic activity occurred in the northeastern, central and eastern part of the island. A phonolitic pumice deposit that forms a noteworthy feature over most of the island has an estimated age of 0.20 Ma. This predates volcanic activity that formed the highest point of the island (Tope de Coroa) which has an age of 0.17±0.02 Ma. The most recent eruption on the island formed nephelinitic lavas in the Porto Novo region at 0.09±0.03 Ma. The oldest volcanism exposed on Santo Antão, which took place about 7.6 Ma ago, was simultaneous with waning activity on Maio at the eastern end of the Cape Verde Archipelago.     

UPb zircon and rutile chronology of Archean greenstone formation and gold mineralization in the Val d'Or region, Quebec

UPb geochronology provides an absolute time framework for the evolution of the Sigma gold deposit and surrounding rocks at Val d'Or, southern Abitibi subprovince. The Bourlamaque batholith, the largest pluton in the area, gives a 2699.8 ± 1.0 Ma UPb zircon age. This pluton cuts the Val d'Or Formation which hosts the mineralization. A UPb zircon age of 2704.9 ± 1.1 Ma on a felsic volcanic rock, the Colombière “rhyolite”, 13 km east of the mine dates that formation. The gold-bearing quartz vein system at Sigma is hosted by andesites and two generations of porphyry intrusions, all metamorphosed to the greenschist facies. The oldest porphyry (“porphyritic diorite”) shows the same deformation as the volcanic rocks, and has a 2703.7 ± 2.5 Ma UPb zircon age. The porphyritic diorite and volcanic rocks are cut by feldspar-porphyry dykes which post-date regional folding and have a 2694.0 ± 2.2 Ma UPb zircon age.Regional greenschist metamorphism has been dated directly, with a UPb date of 2684 ± 7 Ma on rutile in the Colombière “rhyolite”. The mineralization and hydrothermal alteration in the mine are superimposed on the metamorphic minerals. Hydrothermal rutile, from an alteration halo around the veins in andesite, has a 2599 ± 9 Ma UPb age. Textural evidence clearly indicates that the wall-rock alteration and vein filling are contemporaneous, and hence the vein system and gold mineralization appear to have developed at least 80 m.y. after the formation and metamorphism of host greenstones.     

Azimuthal anisotropy of the P-wave velocity in the hypocentral volume of the Krn Mt. (Slovenia) earthquake sequence

Azimuthal anisotropy of P-wave velocity in the hypocentral volume of the Krn Mt. (Slovenia) earthquake sequence is measured using the differences of travel times and of travel paths of the Pg-phase towards the recording stations of the local and regional networks. The observed velocity varies between 6.0 km/s in the ENE–WSW direction and 6.4 km/s for waves propagating NNW–SSE. These directions closely match those of the mean regional principal stress components obtained from individual fault-plane solutions for events from the Krn Mt. sequence. A large part of observed anisotropy may be explained if hypocentral volume is assumed to be pervaded by a system of vertical/subvertical extensive-dilatancy anisotropy (EDA) cracks aligned under the influence of local tectonic stress field.     

On the possibility of a widespread remagnetization of pre-Oligocene rocks from Northeast Japan and the Miocene rotational opening of the Japan Sea

We present new paleomagnetic results from the well dated Miyako Cretaceous sediments (100–110 Ma) from Northeast Japan. These results, combined with those of Tosha [1], yield an in-situ characteristic directionD = 321°,I = 54.5° (α₉₅ = 4.5°),N = 14 sites; reduced to a reference point at 40°N, 142°E). This direction is found to coincide with that of most older plutonic and sedimentary rocks of Devonian to lower Cretaceous age. It is also identical with the westerly pre-folding direction which is preserved in many Oligocene (20–40 Ma) formations from Northeast Japan [1,2]. In contrast, all recent formations (0–17 Ma) have been magnetized in the direction of the present axial dipole field. Only the Oligocene and Miocene results appear to be primary, or at least pre-folding. The Miyako sulfide-bearing sediments and lower Cretaceous (110–125 Ma) magnetite-bearing granites could either still bear a primary magnetization or be completely remagnetized by a low temperature chemical event. Evidence for such events is now found in many places, and as close as South Korea. Available data constrain the Oligo-Miocene history of Northeast Japan and indicate at least20/30° counterclockwise rotation with respect to mainland Asia during the opening of the Sea of Japan. On the other hand, the pre-40 Ma history of Northeast Japan is not well constrained and three models are proposed which are compatible with various interpretations of the data. None of them can presently document pro-Oligocene motion of Northeast Japan with respect to Asia. The most “economical” model implies widespread remagnetization. We conclude that, because of the scarcity of well tested primary magnetization directions, the classical bending of the Japanese Islands rests on weaker grounds than generally realized and that no pre-40 Ma apparent polar wander path of the Japanese Islands can safely be proposed.     

Seismotectonics of the Himalaya and its vicinity from centroid-moment tensor (CMT) solution of earthquakes

The centroid-moment tensor solutions of more than 300 earthquakes that occurred in the Himalayas and its vicinity regions during the period of 1977–1996 are examined. The resultant seismic moment tensor components of these earthquakes are estimated. The Burmese arc region shows prominent east–west compression and north–south extension with very little vertical extension. Northeast India and Pamir–Hindu Kush regions show prominent vertical extension and east–west compression. The Indian plate is subducting eastward beneath the northeast India and Burmese arc regions. The overriding Burmese arc has overthrust horizontally with the underthrusting Indian plate at a depth of 20–80 km and below 80 km depth, it has merged with the Indian plate making “Y” shape structure and as a result the aseismic zone has been formed in the region lying between 26°N–28°N and 91.5°E–94°E at a depth of 10–50 km. Similarly, the Indian plate is underthrusting in the western side beneath the Pamir–Hindu Kush region and the overriding Eurasian plate has overthrust it to form a “Y” shape structure at a depth of 10–40 km and below 60 km depth, it has merged with the Indian plate and both the plates are subducting below 60–260 km depth. Further south, the overriding Eurasian plate has come in contact with the Indian plate at a depth of 20–60 km beneath northwest India and Pakistan regions with left lateral strike slip motion.