河南省恐龙蛋化石研究

该文对河南省恐龙蛋化石的分类和命名、恐龙蛋化石在各个沉积盆地中的分布特征以及恐龙蛋化石的新类型进行了扼要综述。从含蛋层的岩性、蛋化石埋藏的古微地貌、蛋化石 在岩层中的分布和排列方式及保存形式、恐龙蛋与恐龙骨骼化石和其他生物门类化石的共生以及恐龙蛋化石的芡生组合特征等方面论述了恐龙蛋化石的埋藏特征。对恐龙的生活方式、产蛋方式及生态习性、恐龙蛋化石大量富集的机理及恐龙蛋“挂”在石板下的原因等问题进行了     

江西赣州盆地恐龙化石赋存规律与埋藏特征

江西赣州盆地晚白垩世茅店组和河口组发现大量恐龙动物化石,且化石分布集中,大多保存完整,尤其蛋化石成窝性较好,排列较规整,属原地埋藏。文章论述了该盆地内恐龙化石赋存的地层、岩性、化石保存形式及埋藏特征等,认为该盆地内恐龙动物群聚集或恐龙化石集中分布在晚白垩世早期茅店组和晚白垩世晚期河口组;茅店组—河口组,恐龙动物化石保存形式具有"单类型→多类型组合共存"和"不同类型恐龙蛋共生→蛋与骨共生"的规律,甚至出现含胚胎恐龙蛋、恐龙骨骼和龟鳖类化石集群埋藏,为进一步探讨盆地演化和恐龙生存环境提供实际材料。     

甘肃永靖县盐锅峡早白垩世恐龙足迹的新发现

恐龙活动的遗迹 (足迹等 )和遗物 (恐龙蛋和粪化石等 )与恐龙骨骼一样是恐龙活动的直接证据 ,被认为是恐龙化石系列的珍品 .由于我国陆相中生界发育 ,保存的恐龙骨骼、遗迹、遗物化石丰富 ,因此恐龙骨骼及其遗迹化石的研究在世界上占有重要的地位 ,取得了丰硕的研究成果 .我国恐龙足迹化石研究始于 1 92 9年 ,Ｔ .Ｄｅ .Ｃｈａｒｄｉｎ等[1 ] 首次报道了陕西神木发现的恐龙足迹化石 .之后 ,杨钟健(Ｙｏｕｎｇ) [2～5] 先后对四川广元、陕西铜川、河北滦平、云南西双版纳等地的恐龙足迹进行了研究 ;赵资奎[6] 研究了河南内乡的恐龙蛋和恐龙足…     

从浙江天台白垩纪蛋化石复原恐龙类群

浙江天台盆地白垩纪地层中,已发现了甲龙类及慢龙类等恐龙骨骼化石及数以千计的蛋化石,其中许多为恐龙蛋化石。根据国内外相同类型的蛋化石中迄今已发现的恐龙胚胎化石研究成果,可大致确定其中一部分蛋化石分别是由鸭嘴龙类、巨龙类、慢龙类、盗蛋龙类、伤齿龙类和暴龙类等恐龙所产。并发现鸭嘴龙类、巨龙类和慢龙类的圆形蛋、副圆形蛋在数量上占绝大多数,盗蛋龙的长形蛋和伤齿龙的棱柱形蛋较少,暴龙类的巨型长形蛋最少,从而反映了他们各自在生态金字塔中的位置。     

中国南方晚白垩世一具有胚胎的完整的兽脚类恐龙蛋化石(英文)

尽管在世界各地发现大量的恐龙蛋及成窝的蛋化石,但是胚胎化石相对稀少。就目前所知,恐龙胚胎与蛋壳化石相连在一起的约有20例,它们中的大多数来自于破的或者被压碎的蛋化石。报道产自中国江西南部赣州晚白垩世南雄组的具有胚胎的一窝不完整的恐龙蛋化石。根据恐龙蛋和蛋壳的宏观及微观特征,这些蛋化石被鉴定为长形蛋未定种。CT扫描结果显示,所有蛋均具有胚胎骨骼聚集,包括可能的股骨和胫骨。研究结果表明,因为完好无损的蛋可能具有胚胎残骸,所以恐龙胚胎的保存可能超过所能辨别出的。     

皖南恐龙类化石特征及其地层划分意义

皖南齐云山地区恐龙骨骼化石、恐龙蛋化石、恐龙足迹和尾迹化石“三位一体”,为世界罕见。描述了三大类５属７种（或未定种）恐龙化石的形态、大小、结构特点,分析了化石在地层划分方面的意义。按化石产出层位,皖南有恐龙活动的时间约为４０００万年。     

浙江恐龙和蛋化石的时代

在浙江省内,有12个白垩纪红层盆地中发现恐龙化石和蛋化石,且多个盆地龙蛋共生。经初步调查,除金衢盆地衢江群下部中戴组发现恐龙化石外,恐龙化石和蛋化石均产于盆地内的中上部地层:即永康群朝川组、方岩组,衢江群的金华组和衢县组,天台群两头塘组和赤城山组。从相关地层的古生物组合时代和火山岩同位素年龄为101～90Ma以及地层的古地磁均为正向极性特征分析,浙江绝大部分恐龙蛋的时代应为晚白垩世,而蜂窝蛋类化石时代则很可能是早白垩世晚期或未期。     

中国恐龙蛋化石及其生态地层浅析

文章系统地对中国恐龙蛋化石的地理分布作了总结,并将恐龙蛋化石类型归纳为９科,１３属,２１种。在此基础上,着重分析了恐龙蛋化石古生态特征,分别从蛋化石的排列方式,恐龙产蛋的方式,不同类型蛋化石间及蛋化石与骨骼化石共生几方面作了探讨,并进一步阐述恐龙蛋化石在晚白垩世地层划分对比所具有的直接指示意义     

皖南恐龙类化石特征及其地层划分意义

皖南齐云山地区恐龙骨骼化石,恐龙蛋化石,恐龙足迹和尾迹化石“三位一体”,为世界罕见。描述了三大类５属７种（或未定种）恐龙化石的形状,大小,结构特点,分析了化石在地层划分方面的意义,按化石产出层位,皖南有恐龙活动的时间约为４０００万年。     

浙江白垩纪恐龙与恐龙蛋化石的时空分布

浙江省恐龙化石地质遗迹调查表明,全省有9个白垩纪陆相红层盆地产恐龙和恐龙蛋化石,至今已发现有4科5属5种恐龙骨骼和7科11属24种恐龙蛋化石。浙江省恐龙和恐龙蛋化石主要分布在天台盆地和金衢盆地的东阳、衢州、龙游、金华、浦江、兰溪一带,主要产于天台群的赖家组,衢江群的金华组、衢县组。永康、南马、新昌、嵊州、仙居、诸暨、湖山等地永康群朝川组、方岩组中也有较丰富的恐龙化石。依据恐龙和恐龙蛋化石在盆地内地层中的分布、地层的同位素年龄和相伴生的其他生物群特征等分析表明,恐龙和恐龙蛋化石的赋存地质时代以晚白垩世为主。此外,恐龙和恐龙蛋化石在浙江的广泛分布表明该地区地质历史时期气候温暖,植被茂盛,水资源丰富,是恐龙及其他生物生存繁衍的理想场所。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Mountains,nations, parks,and conservation

Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km² and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

NEW SET OF LOW CONCENTRATION STANDARDS FOR LA, CE, SM, YB, LU, Y, SC, V, NB AND TA IN SILICATES

We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al₂O₃-SiO₂ ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.