Dominant climate factors influencing the Arctic runoff and association between the Arctic runoff and sea ice

介绍了星载雷达波谱仪的观测原理及误差分析模型,并在Hauser等提出的SWIM(sea wave investigation and monitoring by satellite)的基础上分析了波谱仪反演海浪谱的波长分辨率和角度分辨率。为了减小反演调制谱的波动,在数据处理过程中时域和波数域相邻单元的平均个数分别为10和8个。系统在不同的模式下工作,为了获取20°的角度分辨率,对调制谱平均次数分别取3次(模式1)、7次(模式2)、10次(模式3)。使用解析法和仿真法分析了SWIM工作在模式2时海浪谱观测的能量误差,两种方法的结果一致。对于给定的海浪条件,能量误差小于20%。     

波谱仪调制功率谱估计算法性能的仿真研究

基于星载波谱仪海浪方向谱探测原理,仿真了不同海况、风速下的海浪波谱仪接收信号,并采用周期图法、Welch法、AR模型法以及最小方差法共4种不同的调制谱估计方法反演出海浪谱,比较各种调制谱估计方法的海浪方向谱反演性能。仿真结果表明:对于一定方位向下的一维海浪谱反演,不同调制谱估计方法反演海浪谱性能优劣没有绝对的顺序。对于二维海浪谱反演,在成长中海浪条件下周期图法反演性能最差,其他3种方法的反演性能没有绝对优劣顺序;对于成熟风浪,最小方差法在积分能量误差、有效波高误差两个指标上的反演性能最好,在主波波向、主波波长误差上,周期图法反演性能最差,其他3种方法没有绝对优劣顺序。在涌浪条件下,AR模型法反演性能优于其他3种方法。在不同海况下,随着波谱仪中心入射角的下降,反演性能会下降。基于这些仿真结果,本文推荐最小方差法作为充分成长海浪的海浪方向谱反演的调制谱估计方法,AR模型法作为涌浪海浪方向谱反演的调制谱估计方法。     

基于SAR海浪方向谱的西北太平洋海浪特性研究

应用中国海洋大学海洋遥感研究所基于Hasselmanns提出的MPI方法用C语言开发的SAR反演海浪方向谱的软件,对2003年1月—2012年1月间西北太平洋海域Envisat波模式数据进行海浪方向谱反演,共得到西北太平洋海域观测的海浪方向谱146 796个。统计由反演的海浪方向谱得到的海浪有效波高、平均波向、平均波周期等数据,分析了西北太平洋海浪场分布的特点,得到了一些有参考意义的结果。     

第一猜测谱运行范围对MPI方法SAR海浪方向谱反演结果的影响

欧空局相继发射的多颗海洋卫星专门设计了波模式SAR数据,提供了27a全球二维海浪的连续观测。批量数据的精确反演对于海浪研究、海浪预报、海洋产业和军事活动至关重要。本文使用ORSI/OUC研发的基于MPI方法的卫星SAR海浪方向谱反演程序,研究了第一猜测谱运行范围对反演结果的影响。对西北太平洋17 000幅波模式SAR数据进行批量处理,发现反演程序中MPI非线性反演方法第一猜测谱的运行范围对反演结果的能量密度、波长、传播方向和谱形结构有程度不同的影响,文中给出一个实例。进而选择10°S~70°N,90°E~170°W运行范围,利用NOAA/NDBC浮标数据,对17 000个反演的海浪方向谱数据进行同步印证,相对误差为4.5%,均方根误差为0.52m,偏差为0.01m。     

星载高级合成孔径雷达波模式算法及其反演数据精度验证

搭载在欧洲环境卫星(ENVISAT)上的高级合成孔径雷达(Advanced Synthetic Aperture Radar,ASAR)二级波模式数据提供了诸多海浪信息包括有效波高、波向、波长和二维海浪谱等,在海浪预报模式中具有重要作用。本文拟利用浮标观测数据对ASAR波模式算法及其反演数据精度进行对比验证。由于SAR卫星在海面的特殊成像机制,不同海况下会有不同的测量结果,通过与美国国家浮标中心(NDBC)的浮标数据对比,显示ASAR有效波高在高海况下低估和在低海况下高估的现象,在中等海况下的测量结果较优。通过研究ASAR数据集中对应的海浪谱,按照能量与方向分布可分为四种类型:单一方向海浪谱(Ⅰ类谱),180°方向模糊海浪谱(Ⅱ类谱),海浪两个方向且能量分布杂乱(Ⅲ类谱),多个传播方向且谱型杂乱海浪谱(Ⅳ类谱)。探究在不同类型下的海浪参数的精度,结果表明在单一波向正常海浪谱情况下,有效波高、波向与浮标数据一致性较好,存在180°方向模糊的对称海浪谱仅有效波高精度较高,谱型杂乱的海浪谱海浪有效波高和波向反演结果均较差。     

X-波段雷达近海海浪频谱反演的神经网络模型

X-波段雷达作为国内海浪观测的一种新工具,在海浪频谱获取和有效波高反演方面仍存在较多问题.本文利用非线性回归方法,将现场实测浮标数据频谱和雷达一维图像谱分别与标准频谱模型进行拟合,发现浮标频谱和一维图像谱具有标准频谱的特征,能够较准确地获取相应的谱参数.提出了建立由雷达一维图像谱参数反演海浪频谱参数的神经网络模型,同时在模型中加入影像序列信噪比,进而反演有效波高,并将反演结果与现场实测数据和传统算法(建立影像序列信噪比与有效波高之间的线性回归方程)进行了对比,结果表明,获取谱参数的误差和反演有效波高的平均误差在20％以内,而传统算法计算有效波高平均误差在20％以上.     

机载波谱仪海浪谱反演方法及其验证

为了验证波谱仪反演二维海浪谱的功能,根据海浪波谱仪的信号形成机制,总结了机载波谱仪反演海浪的流程。利用机载波谱仪回波数据,通过自相关和互相关两种功率谱估计方法,反演了二维海浪谱。最后通过与浮标测量的二维海浪谱进行对比,验证了该机载波谱仪探测二维海浪谱的有效性。结果表明,无论采用自相关函数还是互相关函数进行功率谱估计,得到的主波波长和有效波高与实际二维海浪谱基本一致。互相关函数法得到的交叉谱能去除180°模糊现象,其在计算有效波高时相对于自相关函数会稍微偏小。在计算斜率方差时可以采用5°~12°入射角范围的后向散射系数进行公式拟合,因此定标与否并不影响最后的二维海浪谱结果,未来星载波谱仪只有靠多波束联合才能实现。     

ASAR波模式数据反演参数误差与海浪条纹清晰度的相关性分析

欧洲环境卫星-高级合成孔径雷达(EnvironmentalSatellite-AdvancedSyntheticAperture Radar,Envisat-ASAR)波模式数据提供了全球风、浪要素信息,在海浪模式预报与同化方面有重要作用。该数据合成孔径雷达(SyntheticApertureRadar,SAR)图像普遍存在海浪条纹清晰度不同的现象,但是否影响数据精度尚无定论。本文通过比较2010年NODC (the National Oceanographic Date Center)浮标观测数据和波模式数据,发现经过官方修正后的海浪参数反而具有更大误差。进而通过对比不同条纹清晰度的SAR图像反演参数误差,揭示了ASAR产品海浪参数与浮标测量值之间的误差与海浪条纹清晰度的关系。结果表明:海浪条纹清晰的SAR图像的主波波长和主波周期的反演误差更小,而条纹不清晰SAR图像的有效波高和风速的反演误差更小。通过分析海浪参数对海浪条纹清晰度的敏感性,证实了有效波高和方位向截断波长对SAR图像条纹清晰度的响应最好,波陡次之,与卫星飞行方位角和入射角无关。因此,在反演和修正SAR波模式数据时,考虑图像的条纹清晰度,将会有效提高反演数据的精度。该研究可为高分三号等卫星的波模式数据波浪要素反演精度的提升提供有价值的参考。     

OSMAR-S100便携式高频地波雷达海浪和海面风探测性能分析

OSMAR-S系列便携式高频地波雷达系统采用单极子/交叉环紧凑型天线阵,通过单站雷达即可实现有效探测距离约10km内海浪和海面风的单点观测。为了更好地了解OSMAR-S100雷达系统海浪和海面风的综合探测性能,于2013年1月29日至3月7日在台湾海峡西南部海域进行了雷达与浮标观测的对比试验,得到了有效波高、有效波周期、平均风速和平均风向数据。对比结果表明,OSMAR-S100便携式高频地波雷达可有效观测距雷达10km以内有效波高0.5m以上的海浪平均状况和平均风速5m/s以上的海面风,雷达反演有效波高和有效波周期的均方根误差分别为0.60m和1.60s,反演平均风速和平均风向的均方根误差为1.83m/s和16.7°。在未经区域化标定的情况下,此结果说明了该型雷达产品已初步具备了海浪和海面风的业务化观测水平。     

基于同步风场的机载SAR海浪参数反演方法

针对机载合成孔径雷达(SAR)对海探测特点,采用多入射角法从SAR数据本身得到与海浪参数反演区域时空匹配的同步海面风速和风向,并结合线性变换关系,计算得到海浪初猜谱对应的仿真SAR图像谱,将仿真SAR图像谱和观测SAR图像谱输入代价函数中进行迭代运算,通过非线性方程的解算得到最适海浪谱;采用交叉谱法去除海浪传播180°方向模糊,最终得到海浪参数。论文提出的基于同步风场的机载SAR海浪参数反演方法,充分利用了机载SAR海洋环境探测的优势,解决了传统SAR海浪参数反演中初猜谱构造依赖外部风场的问题,机载同步飞行试验的海浪参数反演结果与浮标观测值的有效波高、波向的均方根误差分别为0.23 m和13.23°,验证了该方法的有效性,可为机载SAR海浪参数反演业务化提供支持。     

海浪同化预报模型理论基础

将共轭变分同化方法应用于 LAGFD- WAM海浪数值模式 ,导出了海浪谱能量平衡方程的共轭方程以及风输入、破碎、底摩擦、波波非线性相互作用和波流相互作用的相应共轭源函数 ,建立了海浪同化模型 ,数值计算仍采用特征线嵌入计算格式 ,为合成孔径雷达波谱反演资料和卫星高度计有效波高资料同化奠定理论基础     

Use of advanced directional wave spectra analysis methods

Frequency-dependent cross-spectral parameters for pitch-roll buoy data and parameters that describe directional wave spectra based on a directional Fourier series are developed by the National Data Buoy Center (NDBC) and other organizations that collect wave data. The World Meteorological Organization (WMO) specifies wave data product formats in its Wave Observation (FM 65 WAVEOB) code. Other organizations, such as the US Army Corps of Engineers Field Wave Gaging Program (FWGP), have similar specifications. A directional Fourier series has poor directional resolution compared with advanced methods such as those based on maximum likelihood and maximum entropy. Transformations are developed for applying the advanced methods and working with directional wave information stored in the WMO's FM 65 WAVEOB code, the FWGP's Wave Data Analysis Standard (WDAS) format, and similar codes and formats. Using the transformations, a directional Fourier series expansion method, a Maximum Likelihood Method (MLM), and a Maximum Entropy Method (MEM) are each applied to 115 sets of NDBC directional wave data. The MEM and MLM provide better directional resolution, but the MEM produces artificial double peaks. There are considerable differences for the three used methods. The developed transformation equations enable wave data users to apply the method that best suits their applications.     

A speckle noise suppression method based on surface waves investigation and monitoring data

The internal energy distribution of waves can be described using ocean-wave spectra. In many ways, obtaining wave spectra on a global scale is critical. Surface waves investigation and monitoring onboard the Chinese-French oceanography satellite is the first space-borne instrument for detecting wave spectra specially, which was launched on October 29, 2018. It can avoid the shortage of synthetic aperture radar detection results while still having some problems, especially with the effects of spe...     

Application of the four models of directional spectra in the Bohai Sea

ＡｐｐｌｉｃａｔｉｏｎｏｆｔｈｅｆｏｕｒｍｏｄｅｌｓｏｆｄｉｒｅｃｔｉｏｎａｌｓｐｅｃｔｒａｉｎｔｈｅＢｏｈａｉＳｅａ￥ＷｕＸｉｕｊｉｅａｎｄＴｅｎｇＸｕｅｃｈｕｎ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ＳｔａｔｅＯｃｅａｎｉｃＡ...     

Analysis of Directional Spectra and Reflection Coefficients in Incident and Reflected Wave Field

In this paper, the modified Bayesian method for the analysis of directional wave spectra and reflection coefficients is verified by numerical and physical simulation of waves. The results show that the method can basically separate the incident and reflected directional spectra. In addition, the effect of the type of wave gage arrays, the number of measured wave properties, and the distance between the wave gage array and the reflection line on the resolution of the method are investigated. Some suggestions are proposed for practical application.     

Quality evaluation and calibration of the SWIM significant wave height product with buoy data

The significant wave height (SWH) is one of the main parameters that describe wave characteristics and is widely used in wave research fields. Wave parameters measured by radar are influenced by the offshore distance and sea state. Validation and calibration are of great significance for radar data applications. The nadir beam of surface wave investigation and monitoring (SWIM) detects the global-ocean-surface SWH. To determine the product quality of SWIM SWH, this paper carried out time-space matching between SWIM and buoy data. The data qualities were evaluated under different offshore distances and sea states. An improved calibration method was proposed based on sea state segmentation, which considered the distribution of the point collocation numbers in various sea states. The results indicate that (1) the SWIM SWH accuracy at offshore distances greater than 50 km is higher than that at distances less than 50 km, with an root mean squared error (RMSE) of 0.244 4 m, scatter index (SI) of 0.115 6 and relative error (RE) of 9.97% at distances greater than 50 km and those of 0.446 0 m, 0.223 0 and 18.66% at distances less than 50 km. (2) SWIM SWH qualities are better in moderate and rough sea states with RMSEs of 0.284 8 m and 0.316 9 m but are worse in slight and very rough sea states. (3) The effect of the improved calibration method is superior to the traditional method in each sea state and overall data, and the RMSE of SWIM SWH is reduced from the raw 0.313 5 m to 0.285 9 m by the traditional method and 0.198 2 m by the improved method. The influence of spatiotemporal window selection on data quality evaluation was analyzed in this paper. This paper provides references for SWIM SWH product applications.     

Measurements of ocean wave spectrum from airborne radar at small incidence angles

This paper proposes the retrieval method of ocean wave spectrum for airborne radar observations at small incidence angles, which is slightly modified from the method developed by Hauser. Firstly, it makes use of integration method to estimate total mean square slope instead of fitting method, which aims to reduce the affects of fluctuations superposed on normalized radar cross-section by integration. Secondly, for eliminating the noise spectrum contained in signal spectrum, the method considers the signal spectrum in certain look direction without any long wave components as the assumed noise spectrum, which would be subtracted from signal spectrum in any look direction for linear wave spectrum retrieval. Estimated ν from the integration method are lower than the one from fitting method and have a standard deviation of 0.004 between them approximately. The assumed noise spectrum energy almost has no big variations along with the wave number and is slightly lower to the high wave number part of signal spectrum in any look direction, which follows that the assumption makes sense. The retrieved directional spectra are compared with the buoy records in terms of peak wavelength, peak direction and the significant wave height. Comparisons show that the retrieved peak wavelength and significant wave height are slightly higher than the buoy records but don’t differs significantly (error less than 10%). For peak direction, the swell waves in first case basically propagate in the wind direction 6 hours ago and the wind-generated waves in second case also propagate in the wind direction, but the 180? ambiguity remains. Results show that the modified method can carry out the retrieval of directional wave spectrum.     

Directional wave spectra measured with a cloverleaf buoy during ARSLOE

The cloverleaf buoy is designed to determine the directional wave spectra with high directional resolution by measuring the vertical acceleration, surface slope, and curvature of the ocean wave surface. This paper describes the properties of the directional wave spectra measured with the cloverleaf buoy during the Atlantic Remote Sensing Land Ocean Experiment (ARSLOE). It is shown that the directional wave spectra measured under relatively constant wind agree fairly well with the similarity spectrum reported previously, but some differences are found in the spectral parameters. The differences in the scale parameters are attributed to unstable atmospheric conditions, though reasonable explanations for those in the shape parameters are difficult now.