Quantifying faulting and base level controls on syn‐rift sedimentation using stratigraphic architectures of coeval,adjacent Early‐Middle Pleistocene fan deltas in Lake Corinth,Greece

Quantification of allogenic controls in rift basin‐fills requires analysis of multiple depositional systems because of marked along‐strike changes in depositional architecture. Here, we compare two coeval Early‐Middle Pleistocene syn‐rift fan deltas that sit 6 km apart in the hangingwall of the Pirgaki‐Mamoussia Fault, along the southern margin of the Gulf of Corinth, Greece. The Selinous fan delta is located near the fault tip and the Kerinitis fan delta towards the fault centre. Selinous and Kerinitis have comparable overall aggradational stacking patterns. Selinous comprises 15 cyclic stratal units (ca. 25 m thick), whereas at Kerinitis 11 (ca. 60 m thick) are present. Eight facies associations are identified. Fluvial and shallow water facies dominate the major stratal units in the topset region, with shelfal fine‐grained facies constituting ca. 2 m thick intervals between major topset units and thick conglomeratic foresets building down‐dip. It is possible to quantify delta build times (Selinous: 615 kyr; Kerinitis: >450 kyr) and average subsidence and equivalent sedimentation rates (Selinous: 0.65 m/kyr; Kerinitis: >1.77 m/kyr). The presence of sequence boundaries at Selinous, but their absence at Kerinitis, enables sensitivity analysis of the most uncertain variables using a numerical model, ‘Syn‐Strat’, supported by an independent unit thickness extrapolation method. Our study has three broad outcomes: (a) the first estimate of lake level change amplitude in Lake Corinth for the Early‐Middle Pleistocene (10–15 m), which can aid regional palaeoclimate studies and inform broader climate‐system models; (b) demonstration of two complementary methods to quantify faulting and base level signals in the stratigraphic record—forward modelling with Syn‐Strat and a unit thickness extrapolation—which can be applied to other rift basin‐fills; and (c) a quantitative approach to the analysis of stacking patterns and key surfaces that could be applied to stratigraphic pinch‐out assessment and cross‐hole correlations in reservoir analysis.     

Axial and transverse deep-water sediment supply to syn-rift fault terraces: Insights from the West Xylokastro Fault Block,Gulf of Corinth,Greece

Deep-water syn-rift systems develop in partially- or transiently-linked depocentres to form complicated depositional architectures, which are characterised by short transport distances, coarse grain sizes and a wide range of sedimentary processes. Exhumed systems that can help to constrain the tectono-stratigraphic evolution of such systems are rare or complicated by inversion tectonics. Here, we document a mid-Pleistocene deep-water syn-rift system fed by Gilbert-type fan deltas in the hangingwall of a rift margin fault bounding the West Xylokastro Horst block, on the southern margin of the Gulf of Corinth, Greece. Structural and stratigraphic mapping combined with digital outcrop models permit observations along this syn-rift depositional system from hinterland source to deep-water sink. The West Xylokastro Fault hangingwall is filled by two distinct sediment systems; an axial system fed by coarse-grained sediment gravity flows derived from fault-tip Gilbert-type fan deltas and a lateral system dominated by mass transport deposits fed from an evolving fault-scarp apron. Abrupt changes in stratigraphic architecture across the axial system are interpreted to record changes in relative base level, sediment supply and tectonics. Locally, depositional topography and intra-basinal structures controlled sediment dispersal patterns, from bed-scale infilling of local rugose topography above mass transport complexes, to basin-scale confinement from the fault scarp apron. These acted to generate a temporally and spatially variable, heterogeneous stratigraphic architecture throughout the basin-fill. The transition of the locus of sedimentation from a rift margin to a fault terrace through the syn-sedimentary growth of a basinward fault produced regressive surfaces updip, which manifest themselves as channels in the deep-water realm and acted to prograde the system. We present a new conceptual model that recognises coeval axial and transverse systems based on the stratigraphic architecture around the West Xylokastro fault block that emphasizes the lateral and vertical heterogeneity of rift basin-fills with multiple entry points.     

Straight from the source's mouth: Controls on field-constrained sediment export across the entire active Corinth Rift,central Greece

The volume and grain-size of sediment supplied from catchments fundamentally control basin stratigraphy. Despite their importance, few studies have constrained sediment budgets and grain-size exported into an active rift at the basin scale. Here, we used the Corinth Rift as a natural laboratory to quantify the controls on sediment export within an active rift. In the field, we measured the hydraulic geometries, surface grain-sizes of channel bars and full-weighted grain-size distributions of river sediment at the mouths of 47 catchments draining the rift (constituting 83% of the areal extent). Results show that the sediment grain-size increases westward along the southern coast of the Gulf of Corinth, with the coarse-fraction grain-sizes (84^th percentile of weighted grain-size distribution) ranging from approximately 19 to 91 mm. We find that the median and coarse-fraction of the sieved grain-size distribution are primarily controlled by bedrock lithology, with late Quaternary uplift rates exerting a secondary control. Our results indicate that grain-size export is primarily controlled by the input grain-size within the catchment and subsequent abrasion during fluvial transport, both quantities that are sensitive to catchment lithology. We also demonstrate that the median and coarse-fraction of the grain-size distribution are predominantly transported in bedload; however, typical sand-grade particles are transported as suspended load at bankfull conditions, suggesting disparate source-to-sink transit timescales for sand and gravel. Finally, we derive both a full Holocene sediment budget and a grain-size-specific bedload discharged into the Gulf of Corinth using the grain-size measurements and previously published estimates of sediment fluxes and volumes. Results show that the bedload sediment budget is primarily comprised (~79%) of pebble to cobble grade (0.475–16 cm). Our results suggest that the grain-size of sediment export at the rift scale is particularly sensitive to catchment lithology and fluvial mophodynamics, which complicates our ability to make direct inferences of tectonic and palaeoenvironmental forcing from local stratigraphic characteristics.     

Impact of faulting in depocentres development,facies assemblages,drainage patterns,and provenance in continental half-graben basins: An example from the Fanja Basin of Oman

Fault throw gradients create transverse folding, and this can influence accommodation creation and sedimentary routing and infill patterns in extensional half-graben basin. The Fanja half-graben basin (Oman) offers an excellent outcrop of an alluvial fan succession displaying cyclical stacking and basin-scale growth-fold patterns. These unique conditions allow for an investigation of fault-timing and accommodation development related to fault-transverse folding. Our study combines geological mapping, structural analysis, sedimentary logging and correlation, and bulk mineralogical compositions. Mapping reveals that the basin is bounded by a regional-scale fault, with local depocentres changing position in response to transverse syncline and anticline development ascribed to fault-displacement gradients. The alluvial Qahlah Formation (Late Cretaceous) is unconformably overlying the Semail Ophiolite, and is in turn overlain by the marine Jafnayn Formation (Late Palaeocene). Facies and stratigraphic analysis allows for subdivision of the Qahlah Formation into four informal units, from base to top: (i) laterite in topographic depressions of the ophiolite, (ii) greenish pebbly sandstones, deriving from axially draining braided streams deposited in the low-relief half-graben basin. This green Qahlah grades vertically into the red Qahlah, formed by alluvial fanglomerates and floodplain mudstones, with drainage patterns changing from fault-transverse to fault-parallel with increasing distance to the main fault. The red Qahlah can be divided into (iii) the Wadi al Theepa member, found in a western basin depocentre, with higher immaturity and sand: mud ratio, suggesting a more proximal source, and (iv) the Al Batah member, located in the eastern part of the basin. The latter shows better sorting, a lower sand: mud ratio, and more prominent graded sub-units. It also shows eastward expansion from an orthogonal monocline, ascribed to accommodation developed in a relay ramp. Changes in sedimentary facies and depositional patterns are consistent with differential mineralogical composition. The Green Qahlah is composed of quartz and lithic mafic rock fragments, sourced from the ophiolite and schists of the metamorphic basement. The Red Qahlah is composed of chert and kaolinite sourced from the Hawasina Nappe succession in the footwall of the master fault. These changes in source area are linked to unroofing of fault-footwalls and domal structures during the extensional collapse of the Semail Ophiolite. The novelty of this study resides in linking sedimentology and fault-displacement events controlling fault-perpendicular folding, and its influence on depocentre generation and stratigraphic architecture. This is an approach seldom considered in seismic analysis, and rarely analysed in outcrop studies, thus placing the results from this study among the key outcrop-based contributions to the field.     

Comparison of frequency of occurrence of earthquakes with slip rates from long-term seismicity data: the cases of Gulf of Corinth, Sea of Marmara and Dead Sea Fault Zone

In this article, through the comparison of knowledge relating to historical earthquakes with the understanding of present-day earthquake mechanics and overall GPS slip rates in the eastern Mediterranean region, it has been possible to obtain an idea of how frequently large earthquakes may be expected in some parts of the region. It has also been possible to make an assessment from these early events of slip rates over a long period of time for the Gulf of Corinth in Greece, the Marmara Sea in Turkey and the Dead Sea Fault System, as well as deriving long-term magnitude–frequency relations for these same regions.
It has been demonstrated that slip rates calculated from historical data are in general comparable to those calculated from GPS measurements and field observations, while the size of historical earthquakes and their uncertainty can be quantified. This permits a more reliable estimation of the long-term hazard, the calculation of which is the concern of the engineering seismologist. It has also been shown that in most cases large earthquakes are less frequent when they are estimated from long-term data sets rather than from the instrumental period making the notion of recurrence time and of hazard assessment, questionable.
This study focuses on some of the few areas in the world for which long-term macroseism information exists and which facilitate this kind of analysis.     

Sediment dispersal and redistributive processes in axial and transverse deep‐time source‐to‐sink systems of marine rift basins: Dampier Sub‐basin,Northwest Shelf,Australia

Morphological scaling relationships between source‐to‐sink segments have been widely explored in modern settings, however, deep‐time systems remain difficult to assess due to limited preservation of drainage basins and difficulty in quantifying complex processes that impact sediment dispersals. Integration of core, well‐logs and 3‐D seismic data across the Dampier Sub‐basin, Northwest Shelf of Australia, enables a complete deep‐time source‐to‐sink study from the footwall (Rankin Platform) catchment to the hanging wall (Kendrew Trough) depositional systems in a Jurassic late syn‐rift succession. Hydrological analysis identifies 24 drainage basins on the J50.0 (Tithonian) erosional surface, which are delimited into six drainage domains confined by NNE‐SSW trending grabens and their horsts, with drainage domain areas ranging between 29 and 156 km². Drainage outlets of these drainage domains are well preserved along the Rankin Fault System scarp, with cross‐sectional areas ranging from 0.08 to 0.31 km². Corresponding to the six drainage domains, sedimentological and geomorphological analysis identifies six transverse submarine fan complexes developing in the Kendrew Trough, ranging in areas from 43 to 193 km². Seismic geomorphological analysis reveals over 90‐km‐long, slightly sinuous axial turbidity channels, developing in the lower topography of the Kendrew Trough which erodes toe parts of transverse submarine fan complexes. Positive scaling relationships exist between drainage outlet spacing and drainage basin length, and drainage outlet cross‐sectional area and drainage basin area, which indicates the geometry of drainage outlets can provide important constraints on source area dimensions in deep‐time source‐to‐sink studies. The broadly negative bias of fan area to drainage basin area ratios indicates net sediment losses in submarine fan complexes caused by axial turbidity current erosion. Source‐to‐sink sediment balance studies must be done with full evaluating of adjacent source‐to‐sink systems to delineate fans and their associated up‐dip drainages, to achieve an accurate tectonic and sedimentologic picture of deep‐time basins.     

Relationships between tectonic activity and sedimentary source-to-sink system parameters in a lacustrine rift basin: A quantitative case study of the Huanghekou Depression (Bohai Bay Basin,E China)

Lacustrine rift basins commonly preserve a fairly complete record of the sediment source-to-sink (S2S) system, and consequently may form an ideal natural laboratory for establishing quantitative relationships between the various elements within the S2S system. The tectonic-activity rate in the source (e.g., fault-growth rate and fault-activity rate), accommodation space and depositional system in the sink (e.g., areal extent and volume, as well as the depositional dip of the fan- and braid-deltas) are genetically related and their quantitative correlations are explored. The Palaeogene succession on the southwestern margin of the Huanghekou Depressionin the Bohai Bay Basin, one of the largest lacustrine rift basins in eastern China, was chosen to study these relationships, using 3-D seismic, core and well-log data. The tectonic activity was strongly related to the sediment supply, accommodation space and morphology of the sink area. Three different rates of tectonic activity are identified; these led to changes in the basic features of the S2S system that influenced each other. In Members 4 and 3 (lower unit) of the Shahejie Fm. (40.44–44.7 Ma), strong tectonic activity led to significant uplift, resulting in the widest exposure of the provenance area to erosion, to a high sediment-supply rate, to a steep slope and to a large accommodation space which controlled the development of several fan-deltas with steep progradational angles. In Member 3 (upper unit) of Shahejie Fm. (37.89–40.44 Ma) and Member 3 of Dongying Fm. (30.2–33.28 Ma), decreased tectonic activity led to slower uplifting, resulting in a wider alluvial plain, longer transport distances, a lower sediment-supply rate and less accommodation space, so that braid-deltas with larger volumes and a gentler slope developed; In Members 1 and 2 of Shahejie Fm. (33.28–37.89 Ma) and Member 2 of Dongying Fm. (26.71–30.2 Ma), still further decreasing tectonic activity led to a still lower sediment-supply rate, a more gentle depositional slope, less accommodation space, and the development of several braid-deltas with a gentle angle. The quantitative relationships established here advance our understanding of the relationships within lacustrine source-to-sink systems, especially for tectonically controlled rift basins.     

Adjustment of a drainage network to capture induced base-level change: an example from the Sorbas Basin, SE Spain

Quaternary catchments in the south of the Sorbas Basin, SE Spain have been affected by two regionally significant river captures. The river captures were triggered by changes in regional gradients associated with sustained Quaternary uplift in the region of 160 m Ma⁻¹. The first capture occurred in the early Pleistocene and re-routed 15% of the original Sorbas Basin drainage into the Carboneras Basin to the south. The second occurred in the late Pleistocene and re-routed 73% of the original Sorbas Basin drainage to the east. This latter capture had dramatic consequences for base-level in the Sorbas Basin master drainage. Local base-level was lowered by 90 m at the capture site, 50 m at 7 km upstream and 25 m at 13 km upstream of the site. The base-level change instigated a complex re-organisation of the drainage networks in systems tributary to the master drainage over the ensuing period (some 100 ka). After the capture, drainage systems closer to the capture site experienced a tenfold increase in incision rates over most of their network. Those located some 13 km upstream of the capture site experienced a fivefold increase in incision, although in this instance, the changes do not appear to have propagated to the headwater regions of the drainage nets. The sensitivity of individual catchments was largely governed by geological controls (structure and lithology). The detailed network evolution in the most sensitive areas can be traced by reconstructing former drainage pathways using abandoned drainage cols and the alignment and degree of incision of the drainage networks. Three main stages of evolution can be identified which record the progressive spread of base-level changes from the master drainage. These are Stage 1 (pre-capture): original south-to-north consequent drainage; Stage 2 (early stage, post capture): aggressive subsequent southwest-to-northeast and east–west drainage developed along structural lineaments first in the east of the area (Stage 2a), and later in the west of the area (Stage 2b); and Stage 3 (late stage, post capture): obsequent drainage developing on the topography of the Stage 2 drainage. All stages of the network evolution are associated with drainage re-routing as a function of river capture at a variety of scales. The results highlight the complex response of the fluvial system, and the very different geomorphological histories of adjacent catchments, emphasising the need for regional approaches for examining long-term changes in fluvial systems.     

Fault propagation and climatic control of sedimentation on the Ghoubbet Rift Floor: insights from the Tadjouraden cruise in the western Gulf of Aden

A detailed geophysical survey of the Ghoubbet Al Kharab (Djibouti) clarifies the small-scale morphology of the last submerged rift segment of the propagating Aden ridge before it enters the Afar depression. The bathymetry reveals a system of antithetic normal faults striking N130°E, roughly aligned with those active along the Asal rift. The 3.5 kHz sub-bottom profiler shows how the faults cut distinct layers within the recent, up to 60 m thick, sediment cover on the floor of the basin. A large volcanic structure, in the centre of the basin, the 'Ghoubbet' volcano, separates two sedimentary flats. The organization of volcanism and the planform of faulting, with en echelon subrifts along the entire Asal–Ghoubbet rift, appear to confirm the westward propagation of this segment of the plate boundary. Faults throughout the rift have been active continuously for the last 8400 yr, but certain sediment layers show different offsets. The varying offsets of these layers, dated from cores previously retrieved in the southern basin, imply Holocene vertical slip rates of 0.3–1.4 mm yr⁻¹ and indicate a major decrease in sedimentation rate after about 6000 yr BP, and a redistribution of sediments in the deepest troughs during the period that preceded that change.     

无定河流域的人工沉积汇及其 对泥沙输移比的影响

依据1956~1996年的资料,计算出了无定河流域历年的人工沉积汇、侵蚀量、泥沙输移比,进行了时间序列分析,并运用回归分析方法,建立了统计关系,揭示了无定河流域人工沉积汇对泥沙输移比的影响。研究表明,无定河流域侵蚀量和产沙量有明显的减小趋势;人工沉积汇先是增大,达到峰值后再减小;泥沙输移比先减小而后增大。这说明,无定河泥沙输移比的时间变化趋势,主要受人工沉积汇的控制。建立的多元回归方程表明,坝地面积增大对流域泥沙输移比减小的贡献最大;地表径流系数减小对流域泥沙输移比减小的贡献居第二位;在3个降水因子中,最大30日降水的贡献最大,汛期降水次之,最大1日降水再次之。在坡面措施和沟道措施中,沟道措施对流域泥沙输移比减小的影响要大于坡面措施。     

Structural controls on non fabric‐selective dolomitization within rift‐related basin‐bounding normal fault systems: Insights from the Hammam Faraun Fault,Gulf of Suez,Egypt

Fault‐controlled dolostone bodies have been described as potential hydrocarbon‐bearing reservoirs. Numerous case studies have described the shape and size of these often non fabric selective dolostone bodies within the vicinity of crustal‐scale lineaments, usually from Palaeozoic or Mesozoic carbonate platforms, which have undergone one or more phases of burial and exhumation. There has been little attention paid, however, to fault‐strike variability in dolostone distribution or the preferential localization of these bodies on particular faults. This study focuses on dolostone bodies adjacent to the Hammam Faraun Fault (HFF), Gulf of Suez. This crustal‐scale normal fault was activated in the Late Oligocene, coincident with the onset of extension within the Suez Rift. Dolomitization in the prerift Eocene Thebes Formation occurred in the immediate footwall of the HFF forming two massive, non facies selective dolostone bodies, ca. 500 m wide. Facies‐controlled tongues of dolostone on the margins of the massive dolostone bodies extend for up to 100 m. The geochemical signature of the dolostone bodies is consistent with replacement by Miocene seawater, contemporaneous with the rift climax and localization of strain along the HFF. A conceptual model of dolomitization from seawater that circulated within the HFF during the rift climax is presented. Seawater was either directly drawn down the HFF or circulated from the hanging wall basin via a permeable aquifer towards the HFF. The lateral extent of the massive dolostone bodies was controlled by pre‐existing HFF‐parallel fracture corridors on the outer margins of the damage zone of the fault. The behaviour of these fracture corridors alternated between acting as barriers to fluid flow before rupture and acting as flow conduits during or after rupture. Multiple phases of dolomitization and recrystallization during the ca. 10 Ma period in which dolomitization occurred led to mottled petrographical textures and wide‐ranging isotopic signatures. The localization of dolomitization on the HFF is interpreted to reflect its proximity to a rift accommodation zone which facilitated vertical fluid flow due to perturbed and enhanced stresses during fault interaction. It is possible that the presence of jogs along the strike of the fault further focused fluid flux. As such, it is suggested that the massive dolostones described in this study provide a window into the earliest stages of formation of fault‐controlled hydrothermal dolostone bodies, which could have occurred in other areas and subsequently been overprinted by more complex diagenetic and structural fabrics.     

A model for the active origin and development of source-bordering dunefields on a semiarid fluvial plain: A case study from the Xiliaohe Plain, Northeast China

Source-bordering dunefields have been reported in some drylands of the planet, but scarcely in China where there are extensive drylands. This article reports them in China for the first time, and presents a model for their active origin and development on a semiarid fluvial plain by means of satellite image analyses and field investigations. Local- and regional-scale examples are chosen to analyze the spatial patterns of dunefields, as well as the relationships with the fluvial systems in the central part of Naiman Banner where the Jiaolai River runs, and the lower Laoha River, and the middle and lower Ulijimulun River (principal tributaries of the Xiliaohe River). The active origin and development of source-bordering dunefields can be divided into four stages in terms of the spatial patterns of dunefields and channel dynamics: Stage I — individual dunes on the downwind margins of river valleys where running water constantly erodes the steep slopes of valley and where the downwind slopes orient to local dominant winds; Stage II — individual local-scale dunefields formed by deflation of the steep valley slopes and extending antecedent dunes downwind, together with the downstream displacement of meanders; Stage III — individual large-scale dunefield belts along the downwind margins of river valleys formed through frequent lateral migrations of channel; Stage IV — regional-scale dunefields formed mainly by river diversions due to climatic changes or tectonic movements. On the one hand, it is the running water's lateral migration, especially meandering, that prepares suitable places for aeolian systems in terms of both wind flow fields and sand sources, and subsequently it can further cause separate local-scale source-bordering dunefields to link together as a regional-scale dunefield belt given sufficient time. On the other hand, diversions of the river are bound to occur following changing hydrologic regimes resulting from tectonic movements or significant climate change (at regional and millennium scales). As a result, when some dunefield belts as well as the adjacent channels are abandoned, new channels work elsewhere in the same way to actively form new source-bordering dunefields and even dunefield belts at a regional scale.     

Obstructed minibasins on a salt-detached slope: An example from above the Sigsbee canopy,northern Gulf of Mexico

Salt-detached gravity gliding/spreading systems having a rugose base-of-salt display complex strain patterns. However, little was previously known about how welding of supra-salt minibasins to the sub-salt may influence both the downslope translation of minibasins on salt-detached slopes and the regional pattern of supra-salt strain. Using a regional 3D seismic reflection data set, we examine a large salt-stock canopy system with a rugose base on the northern Gulf of Mexico slope, on which minibasins both subside and translate downslope. Some minibasins are welded at their bases and others are not. We suggest that basal welds obstruct downslope translation of minibasins and control regional patterns of supra-canopy strain. The distribution of strain above the canopy is complex and variable. Each minibasin that becomes obstructed modifies the local strain field, typically developing a zone of shortening immediately updip and an extensional breakaway zone immediately downdip of the obstructed minibasin. This finding is corroborated by observations from a physical sandbox model of minibasin obstruction. We also find in our natural example that minibasins can be obstructed to different degrees, ranging from severe (e.g., caught in a feeder) to mild (e.g., welded to a flat or gently dipping base-of-salt). By mapping both the presence of obstructed minibasins and the relative degree of minibasin obstruction, we provide an explanation for the origin of complex 3-D strain fields on a salt-detached slope and, potentially, a mechanism that explains differential downslope translation of minibasins. In minibasin-rich salt-detached slope settings, our results may aid: i) structural restorations and regional strain analyses; ii) prediction of subsalt relief in areas of poor seismic imaging; and iii) prediction of stress fields and borehole stability. Our example is detached on allochthonous salt and where the base-of-salt is rugose, with the findings applicable to other such systems worldwide (e.g., Gulf of Mexico; Scotian Margin, offshore eastern Canada). However, our findings are also applicable to systems where the salt is autochthonous but has significant local basal relief (e.g., Santos Basin, Brazil; Kwanza Basin, Angola).     

Sediment routing in the Zagros foreland basin: Drainage reorganization and a shift from axial to transverse sediment dispersal in the Kurdistan region of Iraq

In the northwestern sector of the Zagros foreland basin, axial fluvial systems initially delivered fine-grained sediments from northwestern source regions into a contiguous basin, and later transverse fluvial systems delivered coarse-grained sediments from northeastern sources into a structurally partitioned basin by fold-thrust deformation. Here we integrate sedimentologic, stratigraphic, palaeomagnetic and geochronologic data from the northwestern Zagros foreland basin to define the Neogene history of deposition and sediment routing in response to progressive advance of the Zagros fold-thrust belt. This study constrains the depositional environments, timing of deposition and provenance of nonmarine clastic deposits of the Injana (Upper Fars), Mukdadiya (Lower Bakhtiari) and Bai-Hasan (Upper Bakhtiari) Formations in the Kurdistan region of Iraq. Sediments of the Injana Formation (~12.4–7.75 Ma) were transported axially (orogen-parallel) from northwest to southeast by meandering and low-sinuosity channel belt system. In contrast, during deposition of the Mukdadiya Formation (~7.75–5 Ma), sediments were delivered transversely (orogen-perpendicular) from northeast to southwest by braided and low-sinuosity channel belt system in distributive fluvial megafans. By ~5 Ma, the northwestern Zagros foreland basin became partitioned by growth of the Mountain Front Flexure and considerable gravel was introduced in localized alluvial fans derived from growing topographic highs. Foredeep accumulation rates during deposition of the Injana, Mukdadiya and Bai-Hasan Formations averaged 350, 400 and 600 m/Myr respectively, suggesting accelerated accommodation generation in a rapidly subsiding basin governed by flexural subsidence. Detrital zircon U-Pb age spectra show that in addition to sources of Mesozoic-Cenozoic cover strata, the Injana Formation was derived chiefly from Palaeozoic-Precambrian (including Carboniferous and latest Neoproterozoic) strata in an axial position to the northwest, likely from the Bitlis-Puturge Massif and broader Eastern Anatolia. In contrast, the Mukdadiya and Bai-Hasan Formations yield distinctive Palaeogene U-Pb age peaks, particularly in the southeastern sector of the study region, consistent with transverse delivery from the arc-related terranes of the Walash and Naopurdan volcano-sedimentary groups (Gaveh-Rud domain?) and Urumieh-Dokhtar magmatic arc to the northeast. These temporal and spatial variations in stratigraphic framework, depositional environments, sediment routing and compositional provenance reveal a major drainage reorganization during Neogene shortening in the Zagros fold-thrust belt. Whereas axial fluvial systems initially dominated the foreland basin during early orogenesis in the Kurdistan region of Iraq, transverse fluvial systems were subsequently established and delivered major sediment volumes to the foreland as a consequence of the abrupt deformation advance and associated topographic growth in the Zagros.     

感知价值视角下的传统节庆旅游体验——以西双版纳傣族泼水节为例

感知价值是研究消费者体验和体验质量的一个重要概念和理论。本文以我国少数民族传统节庆———西双版纳傣族泼水节为案例对节庆游客旅游体验的感知价值维度进行了分析并验证。在定性访谈和以往研究文献的基础上,构建了游客体验传统节庆的感知价值量表,并根据量表进行了测量。同时对感知价值维度与节庆游客满意度的关系进行了检验。结果表明,游客体验傣族泼水节的感知价值维度包括七个:文化认知价值、享乐价值、社交价值、服务价值、经济便利价值、情境价值和功能价值。研究发现,不同感知价值维度与游客满意度的相关程度高低不同。与西方学者的研究发现不同的是,作为实用价值的文化认知价值对国内游客满意度的影响是最大的,这与西方游客更看重节庆体验中的享乐价值是相区别的。