首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Progradation is an important mechanism through which sedimentary systems fill sedimentary basins. Although a general progradational pattern is recognized in many basins, few studies have quantified system scale spatial changes in vertical trends that record fluvial system progradation. Here, we provide an assessment of the spatial distribution of vertical trends across the Salt Wash distributive fluvial system (DFS), in the Morrison Formation SW, USA. The vertical distribution of proximal, medial and distal facies, and channel belt proportion and thickness, are analysed at 25 sections across approximately 80 000 km2 of a DFS that spanned approximately 100 000 km2. The stratigraphic signature of facies stacking patterns that record progradation varies depending on location within the basin. An abrupt and incomplete progradation succession dominates the proximal region, whereby proximal deposits directly overlie distal deposits. A more complete succession is preserved in the medial region of the DFS. The medial to distal region of the DFS are either simple aggradational successions, or display progradation of medial over distal facies. Spatial variations in facies successions patterns reflects preservation changes down the DFS. A spatial change in vertical trends of channel belt thickness and proportion is not observed. Vertical trends in channel belt proportion and thickness are locally highly variable, such that systematic up‐section increases in these properties are observed only at a few select sites. Progradation can only be inferred once local trends are averaged out across the entire succession. Possible key controls on trends are discussed at both allocyclic and autocyclic scales including climate, tectonics, eustasy and avulsion. Eustatic controls are discounted, and it is suggested that progradation of the Salt Wash DFS is driven by upstream controls within the catchment.  相似文献   

2.
This paper reviews and synthesizes several Holocene field examples of river response to lateral ground tilting. Key aspects of alluvial architecture modelling in extensional basins are addressed, including the nature of gradual lateral migration, the spatial and temporal history of avulsive sequences, and the underlying controls that determine whether a river responds to lateral tilting through gradual migration or avulsion. A new conceptual model for gradual lateral migration is proposed that unifies previously disparate models. Tilt-induced avulsion in several field examples is associated with sequences that move towards and away from the locus of subsidence during active and quiescent tectonic periods, respectively. These avulsion sequences closely correspond to those produced by several 2D and 3D alluvial architecture models. The rate of lateral tilt appears to control the style of channel movement, with gradual migration occurring at low tilt rates, and avulsion at higher rates. This apparent dependence on tilt rate suggests the mode of channel movement, and also the avulsion frequency, may in part be a function of the imposed tectonic regime.  相似文献   

3.
ABSTRACT This study addresses the complex relationship between an evolving fault population and patterns of synrift sedimentation during the earliest stages of extension. We have used 3D seismic and well data to examine the early synrift Tarbert Formation from the Middle–Late Jurassic northern North Sea rift basin. The Tarbert Formation is of variable thickness across the study area, and thickness variations define a number of 1- to 5-km-wide depocentres bounded by normal faults. Seismic reflections diverge towards the bounding faults indicating that the faults were active contemporaneous with the deposition of the formation. Many of these faults became inactive during later Heather Formation times. The preservation of the Tarbert Formation in both footwall and hangingwall locations demonstrates that, during the earliest synrift, the rate of deposition balanced the rate of tectonic subsidence. Local space generated by hangingwall subsidence was superimposed upon accommodation generated due to a regional rise in relative sea-level. In basal Tarbert Formation times, transgression across the prerift coastal plain produced lagoons and bays, which became increasingly marine. During continued transgression, barrier islands moved landward across the drowned bays. In the southern part of our study area, shallow marine sediments are erosionally truncated by fluvial deposition. These fluvial systems were constrained by fault growth monoclines, and flowed parallel to the main faults. We illustrate that stratal architecture and facies distribution of early sedimentation is strongly influenced by the active short-lived faults. Local depocentres adjacent to fault displacement maxima focused channel stacking and allowed the aggradation of thick shoreface successions. These depocentres formed early in the rift phase are not necessarily related to Late Jurassic – Early Cretaceous depocentres developed along the major linked normal fault systems.  相似文献   

4.
The Po River Basin, where accumulation and preservation of thick sedimentary packages are enhanced by high rates of tectonic subsidence, represents an ideal site to assess the relations between vertical changes in stratigraphic architecture and sediment accumulation rates. Based on a large stratigraphic database, a markedly contrasting stratigraphy of Late Pleistocene and Holocene deposits is reconstructed from the subsurface of the modern alluvial and coastal plains. Laterally extensive fluvial channel bodies and related pedogenically modified muds of latest Pleistocene age are unconformably overlain by Holocene overbank fines, grading seaward into paralic and nearshore facies associations. In the interfluvial areas, a stiff paleosol, dating at about 12.5–10 cal ky BP, marks the Pleistocene–Holocene boundary. Across this paleosol, aggradation rates (ARs) from 16 radiocarbon‐dated cores invariably show a sharp increase, from 0.1–0.9 mm year?1 to 0.9–2.9 mm year?1. Comparatively lower Pleistocene values are inferred to reflect fluvial activity under a low‐accommodation (lowstand and early transgressive) regime, whereas higher ARs during the Holocene are related to increasing accommodation under late transgressive and highstand conditions. Holocene sediment accumulation patterns vary significantly from site to site, and do not exhibit common trends. Very high accumulation rates (20–60 mm year?1) are indicated by fluvial channel or progradational delta facies, suggesting that extremely variable spatial distribution of Holocene ARs was primarily controlled by autogenic processes, such as fluvial channel avulsion or delta lobe switching. Contrasting AR between uppermost Pleistocene and Holocene deposits also are reported from the interfluves of several coeval, alluvial‐coastal plain systems worldwide, suggesting a key control by allogenic processes. Sediment accumulation curves from adjacent incised valley fills show, instead, variable shapes as a function of the complex mechanisms of valley formation and filling.  相似文献   

5.
A major issue in tectonics and sedimentation is the role of cross‐stream tectonic tilting in steering channels. The general idea is that channels will be attracted to lateral maxima in subsidence rate. A physical experiment performed in 1999 at the St. Anthony Falls Laboratory, however, was in conflict with the idea and showed that fluvial channels and resulting stratigraphy can be insensitive to even relatively strong lateral variation in subsidence. Here, we present results from an experiment which uses a simplified relay‐ramp geometry with laterally variable uplift and subsidence to test a hypothesis developed from the earlier experiment: Tectonic tilting steers channels only when the ratio of the time scales describing lateral channel mobility to tectonic deformation is sufficiently large. Occupation time by experimental channels and sand fraction in the deposit (a proxy for channel deposition) both increase with subsidence rate indicating strong steering of channels by tectonic forcing. We also found that, due to local incision, uplift lengthened the time scale for lateral channel migration relative to subsidence. Comparing channel mobility at the beginning of the experiment, with no tectonic forcing, to later tectonic stages of the experiment indicates that active tectonics increased the channel time scale. The interplay of channel steering with uplift and subsidence led to cyclic appearance and disappearance of an autogenic lake in the hanging‐wall basin. This lake was associated with alternation between channels going around vs. across the adjoining upstream uplifted footwall region. This creation and filling of the lake under constant tectonic forcing (constant fault slip rate) in the hanging wall created subaerial fan‐delta parasequences separated by fluvial deposits.  相似文献   

6.
The Triassic Moenkopi Formation in the Salt Anticline Region, SE Utah, represents the preserved record of a low‐relief ephemeral fluvial system that accumulated in a series of actively subsiding salt‐walled mini‐basins. Development and evolution of the fluvial system and its resultant preserved architecture was controlled by the following: (1) the inherited state of the basin geometry at the time of commencement of sedimentation; (2) the rate of sediment delivery to the developing basins; (3) the orientation of fluvial pathways relative to the salt walls that bounded the basins; (4) spatially and temporally variable rates and styles of mini‐basin subsidence and associated salt‐wall uplift; and (5) temporal changes in regional climate. Detailed outcrop‐based tectono‐stratigraphic analyses demonstrate how three coevally developing mini‐basins and their intervening salt walls evolved in response to progressive sediment loading of a succession of Pennsylvanian salt (the Paradox Formation) by the younger Moenkopi Formation, deposits of which record a dryland fluvial system in which flow was primarily directed parallel to a series of elongate salt walls. In some mini‐basins, fluvial channel elements are stacked vertically within and along the central basin axes, in response to preferential salt withdrawal and resulting subsidence. In other basins, rim synclines have developed adjacent to bounding salt walls and these served as loci for accumulation of stacked fluvial channel complexes. Neighbouring mini‐basins exhibit different styles of infill at equivalent stratigraphic levels: sand‐poor basins dominated by fine‐grained, sheet‐like sandstone fluvial elements, which are representative of nonchannelised flow processes, apparently developed synchronously with neighbouring sand‐prone basins dominated by major fluvial channel‐belts, demonstrating effective partitioning of sediment route‐ways by surface topography generated by uplifting salt walls. Reworked gypsum clasts present in parts of the stratigraphy demonstrate the subaerial exposure of some salt walls, and their partial erosion and reworking into the fill of adjoining mini‐basins during accumulation of the Moenkopi Formation. Complex spatial changes in preserved stratigraphic thickness of four members in the Moenkopi Formation, both within and between mini‐basins, demonstrates a complex relationship between the location and timing of subsidence and the infill of the generated accommodation by fluvial processes.  相似文献   

7.
Changes in sandstone and conglomerate maturity in tectonically active basins can be considered either as the product of climatic change or of tectonic restructuring of the feeder drainage system. Besides these regional controls, changes in the configuration of local sources can expressively affect basin fill composition. The Early Cretaceous fluvial successions of the Tucano Basin, a rift basin in northeastern Brazil related to the South Atlantic opening, contain one such case of abrupt change in maturity, marked by the passage from pebbly sandstone and conglomerate rich in quartz and quartzite fragments (Neocomian to Barremian São Sebastião Formation) to more feldspathic pebbly sandstone and conglomerate bearing pebbles of varied composition (Aptian Marizal Formation). Systematic analysis of stratigraphic and spatial variation in palaeocurrents and composition of pebbles and cobbles from both units, integrated with the recognition of fluvial and alluvial fan deposits distribution, revealed an abrupt decrease in maturity during the passage from the São Sebastião Formation to the Marizal Formation. This change is explained by exhumation of basement rocks and erosional removal of originally widespread Silurian to Jurassic sandstone and conglomerate units which were a major source of reworked vein quartz and quartzite pebbles to the São Sebastião Formation. Basin border faults activation during the deposition of the Marizal Formation caused adjacent basement uplift above the local erosional base level at the basin borders, whereas during the São Sebastião Formation deposition, the basin border fault scarps probably exposed mineralogically mature sedimentary units. The proposed model has important implications for interpreting changes in sediment maturity in rift basin successions, as similar results are expected where activation of basin border faults occurs after the erosional removal of older sedimentary or volcanic units that controlled syn‐rift successions composition.  相似文献   

8.
The syn‐rift/post‐rift transition of the late Ediacaran‐mid Cambrian Atlas rift is characterized by the interplay of several processes, such as a widespread episode of fracturing and tilting, associated with encasement of fault‐controlled vein metallic ore deposits of economic importance, and carbonate production and phosphogenesis (Taguedit Bed, Tabia Member) bordering rift‐flank uplifts. A correlatable unconformity marks the end of these processes and the beginning of a thermal subsidence‐dominated regime with development of a more stable, carbonate, peritidal‐dominated platform (Tifnout Member). Late Ediacaran microbial carbonate production and phosphogenesis extended in discontinuous belts around the periphery of uplifted rift shoulders and flanks. Karst development is interpreted to have formed along synsedimentary faults and fractures during abrupt tectonic uplift associated with emplacement of polymetallic hydrothermal dikes (rich in Cu, Fe and subsidiary Pb, Zn). Isotopic analysis indicates that speleothem precipitation in karstic palaeocaves displays significantly lighter δ13C and δ18O values as compared to the host dolomite, implying calcite precipitation by terrestrial fluids rich in decomposing organic matter and/or microbial activity in the cave system.  相似文献   

9.
In this study, measured outcrop sections and geolocated photomosaics are integrated with areal mapping of channel dimensions, degree of amalgamation, calculations of channel‐to‐floodplain ratios and sedimentary facies variability to study and quantify the channel and floodplain deposits in the Sunnyside Delta Interval of the Lower Eocene Green River Formation in the Uinta Basin, Utah. Vertically, sand content and bed thickness increases, due to an increase in the channel‐to‐floodplain ratio, channel size and the degree of channel amalgamation. Laterally, the channel‐to‐floodplain ratio, channel size, the degree of channel amalgamation and the sand content in channel facies decreases in the paleo‐downstream direction. Such vertical and lateral transitions identify the Sunnyside Delta Interval as a fluvial fan (or distributive fluvial system). However, the vertical and lateral transitions occur at multiple spatial scales, demonstrating considerable stratigraphic complexity as compared to the existing facies and architectural models suggested for fluvial megafans and distributive fluvial systems. The smallest‐scale transitions are identified as avulsion‐related packages that form the building blocks of the stratigraphy, whereas the intermediate‐ and largest‐scale transitions are suggested to be related to lobe and whole fan progradation respectively. This documented complexity indicates the significance of self‐organization in building fluvial fan stratigraphy, and demonstrates that changes in the degree of channel amalgamation or in channel‐to‐floodplain ratio are not linked to accommodation changes. On facies scale, an abundance of Froude supercritical‐flow and high‐deposition‐rate facies, in‐channel mud deposits, and in‐channel bioturbation and desiccation indicate deposition in rivers with highly variable discharge. Such discharge conditions suggest seasonally and inter‐annually variable precipitation conditions in the US Western Interior in the Early Eocene.  相似文献   

10.
The study describes the depositional development and sediment partitioning in a prograding paralic Triassic succession. The deposits are associated with the advance of large prism‐scale clinoforms across a shallower platform area. Approaching the platform, the limited accommodation and associated relative higher rates of deposition generated straighter clinoforms with lower foreset angles. The vertical restriction across the platform is interpreted to have amplified the tidal signature. Sediment was redistributed from the coast into increasingly sandy delta‐front deposits, compared to offshore equivalents. The deposits comprise extensive compound dune fields of amalgamated and increasingly clean sandbodies up‐section. Rapid deposition of significant amounts of sand led to differential subsidence and growth‐faulting in the delta front, with downthrown fault blocks further amplifying the tidal energy through funnelling. A mixed‐energy environment created along‐strike variability along the delta front with sedimentation governing process‐regime. Areas of lower sedimentation were reworked by wave and storm‐action, whereas high sedimentation rates preserved fluvially dominated mouth bars. A major transgression, however, favoured tidally dominated deposits also in these areas, attributed to increasing rugosity of the coastline. Formation of an extensive subaqueous platform between the coast and delta front dampened incoming wave energy, and tidally dominated deposits dominate the near‐shore successions. Meanwhile formation of wave‐built sand‐bars atop the platform attest to continued wave influence. The strong tidal regime led to the development of a heterolithic near‐shore tidally dominated channel system, and sandier fluvial channels up‐river. The highly meandering tidal channels incising the subaqueous platform form kilometre wide successions of inclined heterolithic stratification. The fluvially dominated channels which govern deposition on the delta plain are narrower and slightly less deep, straighter, generally symmetric and filled with cleaner sands. This study provides important insight into tidal amplification and sand redistribution during shallowing on a wide shelf, along with along‐strike process‐regime variability resulting from variations in sediment influx.  相似文献   

11.
The Tombador Formation exhibits depositional sequence boundaries placed at the base of extensive amalgamated fluvial sand sheets or at the base of alluvial fan conglomeratic successions that indicate basinward shifts of facies. The hierarchy system that applies to the Tombador Formation includes sequences of different orders, which are defined as follows: sequences associated with a particular tectonic setting are designated as ‘first order’ and are separated by first‐order sequence boundaries where changes in the tectonic setting are recorded; second‐order sequences represent the major subdivisions of a first‐order sequence and reflect cycles of change in stratal stacking pattern observed at 102 m scales (i.e., 200–300 m); changes in stratal stacking pattern at 101 m scales indicate third‐order sequences (i.e., 40–70 m); and changes in stratal stacking pattern at 100 m scales are assigned to the fourth order (i.e., 8–12 m). Changes in palaeogeography due to relative sea level changes are recorded at all hierarchical levels, with a magnitude that increases with the hierarchical rank. Thus, the Tombador Formation corresponds to one‐first‐order sequence, representing a distinct intracratonic sag basin fill in the polycyclic history of the Espinhaço Supergroup in Chapada Diamantina Basin. An angular unconformity separates fluvial‐estuarine to alluvial fan deposits and marks the second‐order boundary. Below the angular unconformity the third‐order sequences record fluvial to estuarine deposition. In contrast, above the angular unconformity these sequences exhibit continental alluvial successions composed conglomerates overlain by fluvial and eolian strata. Fourth‐order sequences are recognized within third‐order transgressive systems tract, and they exhibit distinct facies associations depending on their occurrence at estuarine or fluvial domains. At the estuarine domain, they are composed of tidal channel, tidal bar and overlying shoreface heterolithic strata. At the fluvial domain the sequences are formed of fluvial deposits bounded by fine‐grained or tidal influenced intervals. Fine grained intervals are the most reliable to map in fourth‐order sequences because of their broad laterally extensive sheet‐like external geometry. Therefore, they constitute fourth‐order sequence boundaries that, at the reservoir approach, constitute the most important horizontal heterogeneity and, hence, the preferable boundaries of production zones. The criteria applied to assign sequence hierarchies in the Tombador Formation are based on rock attributes, are easy to apply, and can be used as a baseline for the study of sequence stratigraphy in Precambrian and Phanerozoic basins placed in similar tectonic settings.  相似文献   

12.
S.Liu  S.Yang 《Basin Research》2000,12(1):1-18
Upper Triassic, Lower–Middle Jurassic and Upper Jurassic strata in the western Ordos Basin of North China are interpreted as three unconformity-bounded basin phases, BP-4, BP-5 and BP-6, respectively. The three basin phases were deposited in three kinds of predominantly continental basin: (1) a Late Triassic composite basin with a south-western foreland subbasin and a north-western rift subbasin, (2) an Early–Middle Jurassic sag basin and (3) a Late Jurassic foreland molasse wedge. Within the Late Triassic composite basin BP-4 includes three sequences, S4-1, S4-2 and S4-3. In the south-western foreland subbasin, the three sequences are the depositional response to three episodes of thrust load subsidence, and are mainly composed of alluvial fan, steep-sloped lacustrine delta and fluvial systems in front of a thrust fault-bounded basin flank. In the north-western rift subbasin, the three sequences are the depositional response to three episodes of rift subsidence, and consist of alluvial fan – braid plain and fan delta systems basinward of a normal fault-bounded basin margin. In the sag basin BP-5 includes four sequences, S5-1, S5-2, S5-3 and S5-4, which reflect four episodes of intracratonic sagging events and mainly consist of fluvial, gentle-gradient lacustrine delta and lacustrine systems sourced from peripheral uplifted flanks. BP-6, deposited in the foreland-type basin, includes one sequence, S6-1, which is the depositional response to thrust load subsidence and is composed of alluvial fan systems. The formation and development of these three kinds of basins was controlled by Late Triassic and Jurassic multi-episode tectonism of basin-bounding orogenic belts, which were mainly driven by collision of the North China and South China blocks and subduction of the western Pacific plate.  相似文献   

13.
The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.  相似文献   

14.
The hydrodynamics of rivers approaching a receiving basin are influenced by the onset of backwater conditions that give rise to decelerating reach-average flow velocity and decreasing boundary shear stress. These changes occur across a spatial gradient over which decreasing sediment transport capacity triggers morphodynamic responses that include sediment deposition at the transition from uniform to nonuniform flow. As a consequence, the channel width-to-depth ratio and bed sediment grain size decrease downstream. While nonuniform flow and associated morphodynamic adjustments have been investigated in modern fluvial–deltaic systems, the impacts to fluvial–deltaic stratigraphy remain relatively unexplored. This represents an important unresolved gap: there are few contributions that link morphodynamic response to nonuniform flow, impacts on sediment deposition and influence on the rock record. This study uses a numerical model to explore how variable channel hydraulics influence long-term (1000s years) patterns of sediment deposition and development of stratigraphy. The model results indicate that: (a) nonuniform flow propagates upstream beyond the backwater transition that is traditionally estimated with a basic backwater length scale relationship. (b) Base-level fluctuations, especially rising, enhance the impact of nonuniform flow. (c) Sediment deposition shows large spatio-temporal variability, which ultimately contributes to unique stacking patterns of fluvial–deltaic stratigraphy. (d) Nonuniform flow imparts spatial variation in flow depth, channel bed slope and sediment grain size over the delta, and these signatures are potentially preserved and recognizable in the rock record.  相似文献   

15.
Formation of alluvial stratigraphy is controlled by autogenic processes that mix their imprints with allogenic forcing. In some alluvial successions, sedimentary cycles have been linked to astronomically‐driven, cyclic climate changes. However, it remains challenging to define how such cyclic allogenic forcing leads to sedimentary cycles when it continuously occurs in concert with autogenic forcing. Accordingly, we evaluate the impact of cyclic and non‐cyclic upstream forcing on alluvial stratigraphy through a process‐based alluvial architecture model, the Karssenberg and Bridge (2008) model (KB08). The KB08 model depicts diffusion‐based sediment transport, erosion and deposition within a network of channel belts and associated floodplains, with river avulsion dependent on lateral floodplain gradient, flood magnitude and frequency, and stochastic components. We find cyclic alluvial stratigraphic patterns to occur when there is cyclicity in the ratio of sediment supply over water discharge (Qs/Qw ratio), in the precondition that the allogenic forcing has sufficiently large amplitudes and long, but not very long, wavelengths, depending on inherent properties of the modelled basin (e.g. basin subsidence, size, and slope). Each alluvial stratigraphic cycle consists of two phases: an aggradation phase characterized by rapid sedimentation due to frequent channel shifting and a non‐deposition phase characterized by channel belt stability and, depending on Qs/Qw amplitudes, incision. Larger Qs/Qw ratio amplitudes contribute to weaker downstream signal shredding by stochastic components in the model. Floodplain topographic differences are found to be compensated by autogenic dynamics at certain compensational timescales in fully autogenic runs, while the presence of allogenic forcing clearly impacts the compensational stacking patterns.  相似文献   

16.
The Quaternary evolution and the morpho-sedimentary features of some of the most important rivers in Spain (Ebro and Tagus rivers among others) have been controlled by subsidence due to alluvial karstification of the evaporitic bedrock. The subsidence mechanism may range from catastrophic collapse to slow sagging of the alluvium by passive bending. In the Ebro Basin, the mechanisms and processes involved in karstic subsidence were studied through the analysis of present-day closed depressions as well as through old subsidence depressions (palaeocollapses and solution-induced basins) and associated deformations recorded in the Quaternary alluvial sediments. The Gállego–Ebro river system is presented as a case study of channel adjustments and geomorphic and sedimentary evolution of fluvial systems in dissolution-induced subsidence areas. In this fluvial system, evaporite dissolution during particular Quaternary time intervals (namely early and middle Pleistocene) have lead to the development of a solution-induced basin, approximately 30 km-long by 8 km-wide, filled by Quaternary deposits with a total thickness in excess of 190 m. The main river response to balance the subsidence in the alluvial plain was aggradation in the central reach of the subsiding area, and degradation both in the upstream reach and in the valley sides where alluvial fans and covered pediments may prograde over the fluvial sediments. The main sinking areas are recognized in the sedimentary record by anomalous thickenings in the alluvial deposits and fine-grained sediments deposited in backswamp and ponded areas.  相似文献   

17.
The Rhine–Meuse system in the west‐central Netherlands is a continental‐scale fluvial system bordered by an extremely wide continental shelf. Consequently, late Quaternary eustatic sea‐level changes have resulted in dramatic shoreline displacements, by as much as 800 km. In addition, changes in climate have been severe, given the latitudinal and palaeogeographic setting of the Rhine–Meuse system. We investigated the relative importance of these allogenic controls on fluvial aggradation and incision during the last two glacial–interglacial cycles. We used optical dating of quartz from ~30 samples in a cross‐section perpendicular to the palaeoflow direction, allowing us to correlate periods of aggradation and incision with independent records of sea‐level change, climate change and glacio‐isostatic crustal movements. We found the long‐term aggradation rate to be ~8 cm kyr?1, a value similar to previous estimates of tectonic subsidence rates in the study area. Several excursions from this long‐term aggradation trend could be identified for the last glacial–interglacial cycle. Dry climatic conditions with relatively high sediment supply induced aggradation during oxygen‐isotope stages (OIS) 4 and 3. Build‐up of a glacio‐isostatic forebulge during OIS 2 is a likely cause of incision around the Last Glacial Maximum, followed by an aggradation phase during forebulge collapse. Sea‐level highstands during OIS 5 have likely resulted in the aggradation of coastal prisms, but only minor, basal estuarine deposits have been preserved because these coastal prisms were prone to erosion during ensuing sea‐level falls. Overall, the sedimentary record is dominated by strata formed during time intervals when the study area was completely unaffected by sea‐level control, and our evidence shows that the falling‐stage systems tract has the highest preservation potential. Our study highlights the importance of considering the complex interplay of both upstream and downstream controls to obtain a comprehensive understanding of the evolution of basin‐margin successions.  相似文献   

18.
Recent advances in our understanding of palaeovalleys are largely guided by examples from passive margins, in which accommodation increases down depositional dip. This study tests these models against a dataset from the Pennsylvanian Breathitt Group of the central Appalachian foreland basin, USA. This fluvio‐deltaic succession contains extensive erosionally based fluvio‐estuarine sand bodies that can be tracked over 80 km down depositional dip from a proximal zone of high accommodation close to the orogenic margin to a distal, lower accommodation zone close to the cratonic margin of the basin. The sand bodies are up to 25 m thick, multi‐storey and characterized in their lower parts by strongly amalgamated storeys containing sandy fluvial to estuarine bar accretion elements, and in their middle to upper parts by more fully preserved storeys up to 10 m thick and laterally extensive over 100s of metres. The upper storeys include abandonment channel‐fills of heterolithic marine or marginal marine deposits or muddy to sandy point‐bar elements. Three major regional‐scale architectures include: (i) Tabular sand bodies that everywhere incise open marine prodelta and mouth bar facies and are interpreted as palaeovalleys formed during falling stage and lowstand systems tracts, when eustatic sea‐level fall outpaced tectonic subsidence across the entire study area. (ii) Sand bodies that incise genetically related floodplain lake and/or bay‐fill minor mouth bar deposits up depositional dip and open marine prodelta and mouth bar facies down dip. These stacked distributary channel deposits map down dip into palaeovalleys and formed when up dip subsidence rate resulted in positive, but reduced rate of accommodation creation, while lower tectonic subsidence rate down‐dip resulted in incision. (iii) Sand bodies that incise genetically related floodplain, lake and/or bay‐fill minor mouth bars up dip and pass down‐dip into genetically related unconfined floodplain, prodelta and mouth bar deposits. These sand bodies represent stacked distributary channel fills and channel amalgamation was the product of high rates of lateral migration, typical of the behaviour of channels above their backwater reach. Case (2) sand bodies demonstrate that in rapidly subsiding foreland basins, cross‐shelf palaeovalleys may form down depositional dip from aggradational, distributive fluival strata. Additionally, the genetic relationship between stacked distributary channels and palaeovalleys supports recent models for palaeovalley formation that emphasize diachronous, cut‐and‐fill during falling stage and lowstands of relative sea level.  相似文献   

19.
The Tian Shan range formed in the late Cenozoic in response to the northward propagation of deformation related to the India–Eurasia continental collision. Precise timing of the Tian Shan uplift is required to understand possible mechanisms of continental lithosphere deformation and interactions between climate, tectonism and erosion. Here, we provide magnetostratigraphic age control on the northern Chinese Tian Shan foreland successions. A thorough rock magnetic analysis identifies haematite‐ and magnetite‐bearing alluvial fan deposits in the upper portion of the sampled strata as more reliable palaeomagnetic recorders than magnetite‐bearing fluvial and lacustrine deposits that are often maghaemitized in the lower part of the record. As a result, a robust correlation to the geomagnetic polarity time scale is obtained from 6 to 2 Ma while a tentative correlation is proposed from 6 to 16 Ma. Sediment accumulation rates increase from 155 to 260 m Myr?1 at 3.9±0.3 Ma. This change coincides with a gradual lithologic transition from fluvial (sandstone‐dominated) to alluvial fan (conglomerate‐dominated) deposits that likely records an approaching erosional source related to tectonically increased subsidence rather than differential compaction. Clear evidence for growth strata starting at an estimated age of ~2 Ma provides a minimum age for folding. These results are compared with previous magneotstratigraphic studies from the same and other sections of the northern Tian Shan foreland basin fill, thus enabling a critical assessment of the reliability of magnetostratigraphic dating and the significance of sediment accumulation rate variations with respect to facies variations and growth strata. Our results in the Taxi He section provide a sequence of events that is consistent with enhanced tectonic forcing starting at ~4 Ma, although a climatic contribution must be considered given the close relationship of these ages with the Pliocene climate deterioration.  相似文献   

20.
ABSTRACT Fluvial megafans chronicle the evolution of large mountainous drainage networks, providing a record of erosional denudation in adjacent mountain belts. An actualistic investigation of the development of fluvial megafans is presented here by comparing active fluvial megafans in the proximal foreland basin of the central Andes to Tertiary foreland‐basin deposits exposed in the interior of the mountain belt. Modern fluvial megafans of the Chaco Plain of southern Bolivia are large (5800–22 600 km2), fan‐shaped masses of dominantly sand and mud deposited by major transverse rivers (Rio Grande, Rio Parapeti, and Rio Pilcomayo) emanating from the central Andes. The rivers exit the mountain belt and debouch onto the low‐relief Chaco Plain at fixed points along the mountain front. On each fluvial megafan, the presently active channel is straight in plan view and dominated by deposition of mid‐channel and bank‐attached sand bars. Overbank areas are characterized by crevasse‐splay and paludal deposition with minor soil development. However, overbank areas also contain numerous relicts of recently abandoned divergent channels, suggesting a long‐term distributary drainage pattern and frequent channel avulsions. The position of the primary channel on each megafan is highly unstable over short time scales. Fluvial megafans of the Chaco Plain provide a modern analogue for a coarsening‐upward, > 2‐km‐thick succession of Tertiary strata exposed along the Camargo syncline in the Eastern Cordillera of the central Andean fold‐thrust belt, about 200 km west of the modern megafans. Lithofacies of the mid‐Tertiary Camargo Formation include: (1) large channel and small channel deposits interpreted, respectively, as the main river stem on the proximal megafan and distributary channels on the distal megafan; and (2) crevasse‐splay, paludal and palaeosol deposits attributed to sedimentation in overbank areas. A reversal in palaeocurrents in the lowermost Camargo succession and an overall upward coarsening and thickening trend are best explained by progradation of a fluvial megafan during eastward advance of the fold‐thrust belt. In addition, the present‐day drainage network in this area of the Eastern Cordillera is focused into a single outlet point that coincides with the location of the coarsest and thickest strata of the Camargo succession. Thus, the modern drainage network may be inherited from an ancestral mid‐Tertiary drainage network. Persistence and expansion of Andean drainage networks provides the basis for a geometric model of the evolution of drainage networks in advancing fold‐thrust belts and the origin and development of fluvial megafans. The model suggests that fluvial megafans may only develop once a drainage network has reached a particular size, roughly 104 km2– a value based on a review of active fluvial megafans that would be affected by the tectonic, climatic and geomorphologic processes operating in a given mountain belt. Furthermore, once a drainage network has achieved this critical size, the river may have sufficient stream power to prove relatively insensitive to possible geometric changes imparted by growing frontal structures in the fold‐thrust belt.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号