The structure of the crust and upper mantle to depths of 320 km beneath the Kaapvaal craton, from P wave arrivals generated by regional earthquakes and mining-induced tremors

Travel times from earthquakes recorded at two seismic networks were used to derive an average P wavespeed model for the crust and upper mantle to depths of 320 km below southern Africa. The simplest model (BPI1) has a Moho depth of 34 km, and an uppermost mantle wavespeed of 8.04 km/s, below which the seismic wavespeeds have low positive gradients. Wavespeed gradients decrease slightly around 150 km depth to give a ‘knee’ in the wavespeed-depth model, and the wavespeed reaches 8.72 km/s at a depth of 320 km. Between the Moho and depths of 270 km, the seismic wavespeeds lie above those of reference model IASP91 of Kennett [Research School of Earth Sciences, Australian National University, Canberra, Australia (1991)] and below the southern African model of Zhao et al. [Journal of Geophysical Research 104 (1999) 4783]. At depths near 300 km all three models have similar wavespeeds. The mantle P wavespeeds for southern Africa of Qiu et al. [Geophysical Journal International 127 (1996) 563] lie close to BPI1 at depths between 40 and 140 km, but become lower at greater depths. The seismic wavespeeds in the upper mantle of model BPI1 agree satisfactorily with those estimated from peridotite xenoliths in kimberlites from within the Kaapvaal craton.The crustal thickness of 34 km of model BPI1 is systematically lower than the average thickness of 41 km computed over the same region from receiver functions. This discrepancy can be partly explained by an alternative model (BPI2) in which there is a crust–mantle transition zone between depths of 35 and 47 km, below which seismic wavespeed increases to 8.23 km/s. A low-wavespeed layer is then required at depths between 65 and 125 km.     

A review of Palaeoarchaean felsic volcanism in the eastern Kaapvaal craton:Linking plutonic and volcanic records

In the Kaapvaal craton of southern Africa, as well as other Archaean cratons worldwide, the progression from dominant tonalite-trondhjemite-granodiorite(TTG) to granite-monzogranite-syenogranite(GMS)rock types is interpreted to reflect progressive reworking and differentiation of the continental crust.Here we re-evaluate the early Archaean evolution of the Kaapvaal craton and propose a unified view of the plutonic and volcanic records based on elemental and isotopic(Nd, Hf) data and zircon U-Pb ages.We also report new whole-rock major and trace element analyses, zircon U-Pb ages and Hf-in-zircon analyses of igneous clasts from a conglomerate of the 3.2 Ga Moodies Group of the Barberton Greenstone Belt. Many of these clasts are derived from shallow intrusive rocks of granitic composition, which are scarcely represented in outcrop. Despite alteration, the volcanic rocks can be classified based on their trace element contents into two main groups by comparison with plutonic rocks. One group has characteristics resembling TTGs: relatively low and fractionated rare earth element concentrations with no Eu anomaly and relatively low concentrations of high field strength elements(Nb mostly ≤12 ppm). The second group has GMS-like characteristics: less fractionated REE, marked negative Eu anomalies and HFSE-increasing trends with progressing fractionation(Nb ≤ 50 ppm or more, Th up to 30-40 ppm). In addition, igneous clasts of Moodies Group conglomerate have chemical, mineralogical and isotopic characteristics that link them to GMS. New analyses of some of these clasts indicate elevated high field strength elements(Nb up to 20 ppm) and_(εHf)(t)of zircon down to -3.5. These rocks imply the presence of an already differentiated felsic crust at 3.5 Ga, which has Nd and Hf model ages indicating mantle extraction ages extending back to the Eoarchaean. The combined record of plutonic and volcanic rocks of the Kaapvaal craton provides a more complex scenario than previously suggested and indicates that TTG and GMS-like felsic magmas were emplaced broadly coevally in multiple pulses between ~3.5 Ga and 3.2 Ga.     

华北克拉通太古宙地壳演化和最古老的岩石

简要总结了华北克拉通太古宙地壳演化的规律、认识及存在的问题,特别是近年来在最古老的岩石和锆石年代学研究方面取得的进展。华北克拉通构造热事件主要发生在约2.5Ga,导致大规模陆壳的形成。仅在鲁西、胶东等少数地区有较大规模的约2.7Ga的地质体存在。古元古代晚期的陆陆碰撞使华北克拉通最终形成统一的整体。最近对鞍山地区的研究发现大量3.6～3.8Ga的岩石和锆石。在冀东、信阳、焦作及其他地区也有始太古代—古太古代的岩石和锆石存在。华北克拉通可能存在几个不同的古太古代—始太古代陆核。     

Crustal structure and properties of Archean cratons of Gondwanaland: similarity and difference

This is a synopsis of available data the on crustal structure and properties of thirteen Archean cratons of Gondwanaland (the cratons of Africa, Australia, Antarctica, South America, and the Indian subcontinent). The data include estimates of surface area, rock age and lithology, Moho depth, thickness of lithosphere and sediments, as well as elevations, all summarized in a table. The cratons differ in size from 0.05 x 10⁶ km² (Napier craton) to 4 x 10⁶ km² (Congo craton) and span almost the entire Archean period from 3.8 to 2.5 Ga. Sediments are mostly thin, though reach 7 km in the Congo and West African cratons. Elevations above sea level are from 0 to 2 km; some relatively highland cratons (Kaapvaal, Zimbabwe, and Tanzanian) rise to more than 1 km. On the basis of regional seismic data, the Moho map for cratons has been improved. The Moho diagrams for each craton are constructed. The analysis of the available new data shows that the average Moho depth varies from 33 to 44 km: Pilbara (33 km), Grunehogna (35 km), Sao Francisco (36 km), Yilgarn (37 km), Dharwar (38 km), Tanzanian (39 km), Zimbabwe (39 km), Kaapvaal (40 km), Gawler (40 km), Napier (40 km), West Africa (40 km), Congo (42 km), and Amazon (44 km) cratons. The Moho depth within the cratons is less uniform than it was assumed before: from 28 to 52 km. The new results differ significantly from the earlier inference of a relatively flat Moho geometry beneath Archean cratons. According to the new data, early and middle Archean undeformed crust is characterized by a shallow Moho depth (28-38 km), while late Archean or deformed crust may be as thick as 52 km.     

Pn arrivals and lateral variations of Moho geometry beneath the Kaapvaal craton

Pn arrivals from mining-induced earthquakes on the edge of the Witwatersrand basin show that the P wavespeeds in the uppermost mantle are almost constant throughout most of the Kaapvaal craton. The presence of only small wavespeed variations allows the use of a simple method of estimating crustal thicknesses below the stations of the Kaapvaal broad-band network using Pn times that has been compared with results from receiver functions. One thousand three hundred thirty-seven Pn arrivals were used to derive crustal thicknesses at 46 stations on the Kaapvaal craton. The average crustal thicknesses for 19 centrally located stations on each of the northern and southern regions of the craton that yielded well-constrained thicknesses were 50.52±0.88 km and 38.07±0.85 km, respectively. In contrast, the corresponding average thicknesses determined from receiver functions were 43.58±0.57 km and 37.58±0.70 km, respectively. The systematically lower values for receiver functions in the northern part of the Kaapvaal craton that was affected by the Bushveld magmatism at 2.05 Ga, suggest that the receiver functions do not enable the petrological crust mantle boundary to be reliably resolved due to variations in composition and metamorphic grade in a mafic lower crust. The Pn times also suggest pervasive azimuthal anisotropy with maximum wavespeeds of about 8.40 km/s at azimuths of about 15° and 217° in the northern and southern regions of the craton, respectively, and minimum wavespeeds of about 8.25 km/s.     

Spinel lherzolite xenoliths from the Premier kimberlite (Kaapvaal craton, South Africa): Nature and evolution of the shallow upper mantle beneath the Bushveld complex

Coarse-grained, granular spinel lherzolites xenoliths from the Premier kimberlite show evidence of melt extraction and metasomatic enrichment, documenting a complex history for the shallow mantle beneath the Bushveld complex. Compositions of orthopyroxene, clinopyroxene and spinel indicate equilibration within the spinel–peridotite facies of the upper mantle, at depths from 80 to 100 km and temperatures from 720 to 850 °C. Bulk compositions have lower Mg-number [atomic 100 Mg/(Mg + Fe*)] than previously studied spinel peridotites from Premier, and have higher Mg/Si than low-temperature coarse grained garnet lherzolites, suggesting shallower melting conditions or metasomatic enrichment. Clinopyroxene in one sample is highly LREE-depleted indicating very minor modification of a residue of 20% melt extraction, whereas the calculated REE pattern for a melt in equilibrium with a mildly LREE-depleted sample is similar to MORB or late Archean basalt, possibly related to the Bushveld Complex. Bulk and mineral compositions suggest minimal refertilization by silicate melts in four out of six samples, but REE patterns indicate introduction of a LIL-enriched component that may be related to kimberlite.     

South African seismicity, April 1997 to April 1999, and regional variations in the crust and uppermost mantle of the Kaapvaal craton

Events induced by deep gold-mining activity on the edge of the Witwatersrand basin dominate the seismicity of South Africa. The deployment of 54 broad-band seismic stations at 84 separate locations across southern Africa between April 1997 and April 1999 (Kaapvaal network) enabled the seismicity of South Africa to be better defined over a 2-year period. Seismic events located by the South African national network, and by localized seismic networks deployed in mines or across gold-mining areas, were used to evaluate earthquake location procedures and to show that the Kaapvaal network locates mining-induced tremors with an average error of 1.56±0.10 km compared with 9.50±0.36 km for the South African network. Travel times of seismic events from the mines recorded at the Kaapvaal network indicate regional variations in the thickness of the crust but no clearly resolved variations in seismic wavespeeds in the uppermost mantle. Greater average crustal thicknesses (48–50 km compared with 41–43 km) are observed in the northern parts of the Kaapvaal craton that were affected by the Bushveld magmatism at 2.05 Ga. Estimates of average crustal thickness for the southern part of the Kaapvaal craton from receiver functions (38 km) agree well with those from refracted arrivals from mining-induced earthquakes if the crustal thicknesses below the sources are assumed to be 40–43 km. In contrast, the average crustal thickness inferred from refracted arrivals for the northern part of the Kaapvaal craton is larger by about 7 km (51 km) than that inferred from receiver functions (44 km), suggesting a thick mafic lower crust of variable seismic properties due to variations in composition and metamorphic grade. Pn wavespeeds are high (8.3–8.4 km/s), indicating the presence of highly depleted magnesium-rich peridotite throughout the uppermost mantle of the craton. Seismic Pg and Sg phases indicate that the upper crust around the Witwatersrand basin is comparatively uniform in composition when averaged over several kilometres.     

扬子克拉通北部前泥盆纪地壳演化：来自碎屑锆石U- Pb和Hf同位素证据

扬子克拉通前泥盆纪地壳演化过程一直是地学界研究的热点。本文报道了扬子克拉通北部武汉地区玉笋山剖面的志留系坟头组和泥盆系云台观组碎屑沉积岩中锆石U- Pb年龄和Hf同位素组成。结果表明，武汉地区坟头组和云台观组样品中最年轻的碎屑锆石年龄分别为430±5 Ma和415±5 Ma，将该地区坟头组和云台观组的沉积时代各限定在中志留世和晚泥盆世。碎屑锆石Hf同位素特点表明，沉积物源区在中太古代、新太古代以及新元古代形成了少量初生地壳，而古老地壳的再造主要发生在新太古代、新元古代和古生代，区域上最显著的初生地壳生长时期则是古元古代。综合对比扬子克拉通北部东、西两侧具有明显不同的锆石U- Pb年龄、微量元素和Hf同位素组成，暗示扬子克拉通可能由多个相对独立地壳演化过程的部分构成，而不具有统一的早前寒武纪基底。     

Sedimentation rates, basin analysis and regional correlations of three Neoarchaean and Palaeoproterozoic sub-basins of the Kaapvaal craton as inferred from precise U–Pb zircon ages from volcaniclastic sediments

Calculation of sedimentation rates of Neoarchaean and Palaeoproterozoic siliciclastic and chemical sediments covering the Kaapvaal craton imply sedimentation rates comparable to their modern facies equivalents. Zircons from tuff beds in carbonate facies of the Campbellrand Subgroup in the Ghaap Plateau region of the Griqualand West basin, Transvaal Supergroup, South Africa were dated using the Perth Consortium Sensitive High Resolution Ion Microprobe II (SHRIMP II). Dates of Ma and Ma for the middle and the upper part of the Nauga Formation indicate that the decompacted sedimentation rate for the peritidal flat to subtidal below-wave-base Stratifera and clastic carbonate facies, southwest of the Ghaap Plateau at Prieska, was of up to 10 m/Ma, when not corrected for times of erosion and non-deposition. Dates of Ma for the upper Gamohaan Formation and for the upper Monteville Formation, indicate that some 2000 m of carbonate and subordinate shale sedimentation occurred during 16 Ma to 62 Ma on the Ghaap Plateau. For these predominantly peritidal stromatolitic carbonates, decompacted sedimentation rates were of 40 m/Ma to over 150 m/Ma (Bubnoff units). The mixed siliciclastic and carbonate shelf facies of the Schmidtsdrif Subgroup and Monteville Formation accumulated with decompacted sedimentation rates of around 20 B. For the Kuruman Banded Iron Formation a decompacted sedimentation rate of up to 60 B can be calculated. Thus, for the entire examined deep shelf to tidal facies range, Archaean and Phanerozoic chemical and clastic sedimentation rates are comparable. Four major transgressive phases over the Kaapvaal craton, followed by shallowing-upward sedimentation, can be recognized in the Prieska and Ghaap Plateau sub-basins, in Griqualand West, and partly also in the Transvaal basin, and are attributed to second-order cycles of crustal evolution. First-order cycles of duration longer than 50 Ma can also be identified. The calculated sedimentation rates reflect the rate of subsidence of a rift-related basin and can be ascribed to tectonic and thermal subsidence. Comparison of the calculated sedimentation rates to published data from other Archaean and Proterozoic basins allows discussion of general Precambrian basin development. Siliciclastic and carbonate sedimentation rates of Archaean and Palaeoproterozoic basins equivalent to those of younger systems suggest that similar mechanical, chemical and biological processes were active in the Precambrian as found for the Phanerozoic. Particularly for stromatolitic carbonates, matching modern and Neoarchaean sedimentation rates are interpreted as a strong hint of a similar evolutionary stage of stromatolite-building microbiota. The new data also allow for improved regional correlations across the Griqualand West basin and with the Malmani Subgroup carbonates in the Transvaal basin. The Nauga Formation carbonates in the southwest of the Griqualand West basin are significantly older than the Gamohaan Formation in the Ghaap Plateau region of this basin, but are in part, correlatives of the Oaktree Formation in the Transvaal and of parts of the Monteville Formation on the Ghaap Plateau.     

The electrical structure of the Slave craton

The Slave craton in northwestern Canada, a relatively small Archean craton (600×400 km), is ideal as a natural laboratory for investigating the formation and evolution of Mesoarchean and Neoarchean sub-continental lithospheric mantle (SCLM). Excellent outcrop and the discovery of economic diamondiferous kimberlite pipes in the centre of the craton during the early 1990s have led to an unparalleled amount of geoscientific information becoming available.

Over the last 5 years deep-probing electromagnetic surveys were conducted on the Slave, using the natural-source magnetotelluric (MT) technique, as part of a variety of programs to study the craton and determine its regional-scale electrical structure. Two of the four types of surveys involved novel MT data acquisition; one through frozen lakes along ice roads during winter, and the second using ocean-bottom MT instrumentation deployed from float planes.

The primary initial objective of the MT surveys was to determine the geometry of the topography of the lithosphere–asthenosphere boundary (LAB) across the Slave craton. However, the MT responses revealed, completely serendipitously, a remarkable anomaly in electrical conductivity in the SCLM of the central Slave craton. This Central Slave Mantle Conductor (CSMC) anomaly is modelled as a localized region of low resistivity (10–15 Ω m) beginning at depths of 80–120 km and striking NE–SW. Where precisely located, it is spatially coincident with the Eocene-aged kimberlite field in the central part of the craton (the so-called “Corridor of Hope”), and also with a geochemically defined ultra-depleted harzburgitic layer interpreted as oceanic or arc-related lithosphere emplaced during early tectonism. The CSMC lies wholly within the NE–SW striking central zone defined by Grütter et al. [Grütter, H.S., Apter, D.B., Kong, J., 1999. Crust–mantle coupling; evidence from mantle-derived xenocrystic garnets. Contributed paper at: The 7th International Kimberlite Conference Proceeding, J.B. Dawson Volume, 1, 307–313] on the basis of garnet geochemistry (G10 vs. G9) populations.

Deep-probing MT data from the lake bottom instruments infer that the conductor has a total depth-integrated conductivity (conductance) of the order of 2000 Siemens, which, given an internal resistivity of 10–15 Ω m, implies a thickness of 20–30 km. Below the CSMC the electrical resistivity of the lithosphere increases by a factor of 3–5 to values of around 50 Ω m. This change occurs at depths consistent with the graphite–diamond transition, which is taken as consistent with a carbon interpretation for the CSMC.

Preliminary three-dimensional MT modelling supports the NE–SW striking geometry for the conductor, and also suggests a NW dip. This geometry is taken as implying that the tectonic processes that emplaced this geophysical–geochemical body are likely related to the subduction of a craton of unknown provenance from the SE (present-day coordinates) during 2630–2620 Ma. It suggests that the lithospheric stacking model of Helmstaedt and Schulze [Helmstaedt, H.H., Schulze, D.J., 1989. Southern African kimberlites and their mantle sample: implications for Archean tectonics and lithosphere evolution. In Ross, J. (Ed.), Kimberlites and Related Rocks, Vol. 1: Their Composition, Occurrence, Origin, and Emplacement. Geological Society of Australia Special Publication, vol. 14, 358–368] is likely correct for the formation of the Slave's current SCLM.     

Three-dimensional seismic modelling of crustal structure in the TESZ region based on POLONAISE''97 data

This paper reports the results of 3-D tomographic modelling of crustal structure in the Trans European Suture Zone region (TESZ) of Poland, eastern Germany and Lithuania. The data are the product of a large-scale seismic experiment POLONAISE'97, which was carried out in 1997. This experiment was designed to provide some 3-D coverage. The TESZ forms the boundary between the Precambrian crustal terranes of the East European Craton (EEC) and the younger Phanerozoic terranes to the southwest. The 3-D results generally confirm the earth models derived by earlier 2-D analyses, but also add some important details as well as a 3-D perspective on the structure. The velocity model obtained shows substantial horizontal variations of crustal structure across the study area. Seismic modelling shows low (<6.1 km/s) velocities suggesting the presence of sedimentary rocks down to a depth of about 20 km in the Polish basin. The shape of the basin in the vicinity of the profile P4 shows significant asymmetry. Three-dimensional modelling also allowed tracing of horizontal irregularities of the basin shape as well as variations of the Moho depth not only along profiles, but also between them. The slice between P2 and P4 profiles shows about 10-km variations of the Moho over a 100-km interval. The crustal thickness varies from about 30 km in SW, beneath the Palaeozoic platform, to about 42 km beneath East European Craton in NE. High seismic velocities of about 6.6 km/s were found in the depth range 2–10 km, which coincides with K trzyn anorthosite massif. The results of this 3-D seismic modelling of the POLONAISE'97 data will ultimately be supplemented by inversion of seismic data from previous experiments.     

The crustal structure of the Guayana Shield, Venezuela, from seismic refraction and gravity data

We present results from a seismic refraction experiment on the northern margin of the Guayana Shield performed during June 1998, along nine profiles of up to 320 km length, using the daily blasts of the Cerro Bolívar mines as energy source, as well as from gravimetric measurements. Clear Moho arrivals can be observed on the main E–W profile on the shield, whereas the profiles entering the Oriental Basin to the north are more noisy. The crustal thickness of the shield is unusually high with up to 46 km on the Archean segment in the west and 43 km on the Proterozoic segment in the east. A 20 km thick upper crust with P-wave velocities between 6.0 and 6.3 km/s can be separated from a lower crust with velocities ranging from 6.5 to 7.2 km/s. A lower crustal low velocity zone with a velocity reduction to 6.3 km/s is observed between 25 and 25 km depth. The average crustal velocity is 6.5 km/s. The changes in the Bouguer Anomaly, positive (30 mGal) in the west and negative (−20 mGal) in the east, cannot be explained by the observed seismic crustal features alone. Lateral variations in the crust or in the upper mantle must be responsible for these observations.     

Petrology and U–Pb geochronology of lower crustal xenoliths and the development of a craton, Slave Province, Canada

Lower crustal xenoliths recovered from Eocene to Cambrian kimberlites in the central and southern Slave craton are dominated by mafic granulites (garnet, clinopyroxene, plagioclase±orthopyroxene), with subordinate metatonalite and peraluminous felsic granulites. Geothermobarometry indicates metamorphic conditions of 650–800 °C at pressures of 0.9–1.1 GPa. The metamorphic conditions are consistent with temperatures expected for the lower crust of high-temperature low-pressure (HT-LP) metamorphic belts characteristic of Neoarchean metamorphism in the Slave craton. U–Pb geochronology of zircon, rutile and titanite demonstrate a complex history in the lower crust. Mesoarchean protoliths occur beneath the central Slave supporting models of an east-dipping boundary between Mesoarchean crust in the western and Neoarchean crust in the eastern Slave. At least, two episodes of igneous and metamorphic zircon growth occurred in the interval 2.64–2.58 Ga that correlate with the age of plutonism and metamorphism in the upper crust, indicating magmatic addition to the lower crust and metamorphic reworking during this period. In addition, discrete periods of younger zircon growth at ca. 2.56–2.55 and 2.51 Ga occurred 20–70 my after the cessation of ca. 2.60–2.58 Ga regional HT-LP metamorphism and granitic magmatism in the upper crust. This pattern of younger metamorphic events in the deep crust is characteristic of the Slave as well as other Archean cratons (e.g., Superior). The high temperature of the lower crust immediately following amalgamation of the craton, coupled with evidence for continued metamorphic zircon growth for >70 my after ‘stabilization’ of the upper crust, is difficult to reconcile with a thick (200 km), cool lithospheric mantle root beneath the craton prior to this event. We suggest that thick tectosphere developed synchronously or after these events, most likely by imbrication of mantle beneath the craton at or after ca. 2.6 Ga. The minimum age for establishing a cratonic like geotherm is given by lower crustal rutile ages of ca. 1.8 Ga in the southern Slave. Transient heating and possible magmatic additions to the lower crust continued through the Proterozoic, with possible additional growth of the tectosphere.     

塔里木克拉通北缘库鲁克塔格地块太古宙基底组成与地壳演化

塔里木克拉通太古宙岩石主要出露在库鲁克塔格、北阿尔金、铁克里克和敦煌等四个边缘基底隆起带。库鲁克塔格地块位于塔里木克拉通东北缘，其中有可靠年代学报道的太古宙岩石主要出露在库尔勒、辛格尔、兴地和帕尔岗塔格四个地区。库鲁克塔格地块的太古宙岩石主要由长英质正片麻岩(含TTG片麻岩)和少量以包体产出的斜长角闪岩组成，真正的太古宙表壳岩较少见。本次研究在库尔勒地区对长英质正片麻岩和石英岩开展锆石SHRIMP U- Pb测年分析，2个长英质正片麻岩样品的年龄分别为2695±9 Ma和2705±8 Ma；石英岩样品中的碎屑锆石核最小年龄峰为2513 Ma，石英岩有可能是太古宙沉积岩；上述岩石样品都经历了古元古代早期 (1. 9~1. 8 Ga)高级变质作用。地球化学分析发现，库鲁克塔格地块新太古代长英质片麻岩的原岩有多种岩石类型，这些长英质岩石都形成于与俯冲作用有关的岛弧构造背景。基性的斜长角闪岩和变质辉长岩可能产出于不同的背景，一部分来源于岛弧地幔楔的部分熔融，另一部分则可能来自于大洋板内，以洋脊玄武岩为主。库鲁克塔格地块太古宙岩石具有2. 7 Ga和2. 5 Ga两个年龄峰值，2. 7 Ga岩浆事件主要发生在库鲁克塔格西部地区，锆石的εHf(t)值既有正值也有负值，表明这一时期地壳生长和改造同时并存；~2. 5 Ga的岩浆活动分布范围较为广泛，全岩εNd(t)和锆石εHf(t)值以正值为主，暗示这一时期可能存在显著的大陆地壳生长。     

Seismic velocities of granulite-facies xenoliths from Central Ireland: Implications for lower crustal composition and anisotropy

V_p and V_s values have been measured experimentally and calculated for granulite-facies lower crustal xenoliths from central Ireland close to the Caledonian Iapetus suture zone. The xenoliths are predominantly foliated and lineated metapelitic (garnet–sillimanite–K-feldspar) granulites. Their metapelitic composition is unusual compared with the mostly mafic composition of lower crustal xenoliths world-wide. Based on thermobarometry, the metapelitic xenoliths were entrained from depths of c. 20–25 ± 3.5 km and rare mafic granulites from depths of 31–33 ± 3.4 km. The xenoliths were emplaced during Lower Carboniferous volcanism and are considered to represent samples of the present day lower crust.V_p values for the metapelitic granulites range between 6.26 and 7.99 km s^{− 1} with a mean value of 7.09 ± 0.4 km s^{− 1}. Psammite and granitic orthogneiss samples have calculated V_p values of 6.51 and 6.23 km s^{− 1}, respectively. V_s values for the metapelites are between 3.86 and 4.34 km s^{− 1}, with a mean value of 4.1 ± 0.15 km s^{− 1}. The psammite and orthogneiss have calculated V_s values of 3.95 and 3.97 km s^{− 1}, respectively.The measured seismic velocities correlate with density and with modal mineralogy, especially the high content of sillimanite and garnet. V_p anisotropy is between 0.15% and 13.97%, and a clear compositional control is evident, mainly in relation to sillimanite abundance. Overall V_s anisotropy ranges from 1% to 11%. Poisson's ratio (σ) lies between 0.25 and 0.35 for the metapelitic granulites, mainly reflecting a high V_p value due to abundant sillimanite in the sample with the highest σ. Anisotropy is probably a function of deformation associated with the closure of the Iapetus ocean in the Silurian as well as later extension in the Devonian. The orientation of the bulk strain ellipsoid in the lower crust is difficult to constrain, but lineation is likely to be NE–SW, given the strike-slip nature of the late Caledonian and subsequent Acadian deformation.When corrected for present-day lower crustal temperature, the experimentally determined V_p values correspond well with velocities from the ICSSP, COOLE I and VARNET seismic refraction lines. Near the xenolith localities, the COOLE I line displays two lower crustal layers with in situ V_p values of 6.85–6.9 and 6.9–8.0 km s^{− 1}, respectively. The upper (lower velocity) layer corresponds well with the metapelitic granulite xenoliths while the lower (higher velocity) layer matches that of the basic granulite xenoliths, though their metamorphic pressures suggest derivation from depths corresponding to the present-day upper mantle.     

Moho topography and lower crustal wide-angle reflectivity around the TESZ in southern Scandinavia and northeastern Europe

The Moho topography is strongly undulating in southern Scandinavia and northeastern Europe. A map of the depth to Moho shows similarities between the areas of the Teisseyre–Tornquist Zone (TTZ) in Poland and the Fennoscandian Border Zone (FBZ), which is partly coinciding with the Sorgenfrei–Tornquist Zone (STZ) in Denmark. The Moho is steeply dipping at these zones from a crustal thickness of approximately 32 km in the young Palaeozoic Platform and basin areas to approximately 45 km in the old Precambrian Platform and Baltic Shield. The Moho reflectivity (P_MP waveform) in the POLONAISE'97 refraction/wide-angle seismic data from Poland and Lithuania is variable, ranging from ‘sharp’ to strongly reverberating signals of up to 2 s duration. There is little or no lower crustal wide-angle reflectivity in the thick Precambrian Platform, whereas lower crustal reflectivity in the thin Palaeozoic Platform is strongly reverberating, suggesting that the reflective lower crust and upper mantle is a young phenomena. From stochastic reflectivity modelling, we conclude that alternating high- and low-velocity layers with average thicknesses of 50–300 m and P-wave velocity variations of ±3–4% of the background velocity can explain the lower crustal reflectivity. Sedimentary layering affects the reflectivity of deeper layers significantly and must be considered in reflectivity studies, although the reverberations from the deeper crust cannot be explained by the sedimentary layering only. The reflective lower crust and upper mantle may correspond to a zone that has been intruded by mafic melts from the mantle during crustal extension and volcanism.     

Reappraisal of the structure of the Western Iron Ore Group, Singhbhum craton, eastern India: Implications for the exploration of BIF-hosted iron ore deposits

The middle to late Archean Iron Ore Group rocks occurring along the western margin (the Western Iron Ore basin) of the Singhbhum Granite massif in the Singhbhum craton were deformed during Iron Ore orogeny and are disposed in a horseshoe-shaped synclinal structure in the eastern part of the Indian shield. The Western Iron Ore basin hosts almost all the major high-grade iron ore deposits of eastern India. Contrary to the established view, present analysis emphasizes that the horseshoe fold in reality is a synclinorium consisting of a syncline–anticline fold pair which were later cross-folded along an east–west axis.

Structural analysis in the eastern anticline of the ‘horseshoe synclinorium’ suggests that the BIF hosting the high-grade iron ore bodies are disposed in three linear NNE–SSW trending belts, each showing an open synclinal geometry. Later cross folding produced development of widespread dome and basin pattern at the sub-horizontal hinge zones of these synclinal fold belts. The major iron ore deposits in the eastern anticline at the present level of erosion are preferentially localized within shallow elongated basinal structures only. The axis of the adjoining western syncline was similarly uplifted as partial culminations where cross-folded against E–W anticlinal axes. But here, the BIF-iron ore bodies are preferentially localized within elongated domal structures in contrast to the basinal sites in the adjacent eastern anticline. Such an inference based on structural analysis could probably be utilized as a potential tool for all future explorations, reserve estimation and recovery of the iron ore deposits in the terrain.     

Study on the Gravity Field and Deep-Seated Crustal Structure at the North Margin of the Qinghai-Tibet Plateau

1.I~ductionThenorthernmarginoftheQinghai-TibetplateauincludestheAltllnMis.,theQilianMis.,KunlunMis.,theQaidambasinandthesouthernTarimbasin.ThisareaistCctonicallycharacterizedbyintensiveCenozoicdeformationwithcomplicateddeformationalmechedsm(Molnaretal.,1987;Zheng,1991;Culetal.,1994;Ding,1995andXuetal.,1996).Thedeformationalmechanismsincludethrust-napping,strike-slipping,extensionandblockrotation,aswellassimultaneousupliftingandtypicalbasin-rangetectonics(CulandXu,1996).IntermsofCenozoi…     

Seismically constrained two-dimensional crustal thermal structure of the cambay basin

The temperature field within the crust is closely related to tectonic history as well as many other geological processes inside the earth. Therefore, knowledge of the crustal thermal structure of a region is of great importance for its tectonophysical studies. This work deals with the two-dimensional thermal modelling to delineate the crustal thermal structure along a 230 km long Deep Seismic Sounding (DSS) profile in the north Cambay basin. In this work P-wave velocities obtained from the DSS studies have been converted into heat generation values for the computation of temperature distribution. The model result reveals the Curie isotherm at a depth of ≈22 km and Moho temperature at around 900‡C.     

南海东北陆缘的地壳速度结构及其构造意义:来自广角地震剖面的约束

南海东北部深部地壳结构蕴含着南海陆缘伸展张裂过程的重要信息。在南海东北陆缘布设的一条广角地震测线(DP13)沿NW-SE方向依次穿过东沙隆起和台西南盆地。本文利用射线追踪和正演走时拟合软件RayInvr构建地壳纵波速度结构,模型表明：沉积层速度1.6～4.6 km/s,厚度0.5～3.8 km,横向分布不均匀,沉积基底起伏剧烈;莫霍面埋藏深度由陆架区的25.5 km急剧减小到陆坡下方的13 km,随后向下陆坡远端增深至16 km;陆架处东沙隆起下方地壳厚度从～25 km减薄到～21 km,下陆坡远端地壳厚约10～13 km,地壳拉张因子分别为1.3～1.5和2.6～3.1,表现为轻微和中等减薄;陆坡区台西南盆地内地壳厚度从17 km急剧减薄至7～8 km,地壳拉张因子高达4.6,呈超伸展减薄;地壳厚度由陆向海非单调减薄,地壳伸展具有明显的空间差异性;陆架-上陆坡和下陆坡下地壳底部发现两个相对孤立的不连续高速体,速度分别为7.0～7.5 km/s和7.0～7.3 km/s,厚度分别3～5 km和1～3 km,前者位于古太平洋俯冲带前缘,几乎与南海东北部高磁异常重叠,推测由中生代古太平洋板...