Origin,distribution and hydrogeochemical controls on methane occurrences in shallow aquifers,southwestern Ontario,Canada

Natural gas reservoirs in organic-rich shales in the Appalachian and Michigan basins in the United States are currently being produced via hydraulic fracturing. Stratigraphically-equivalent shales occur in the Canadian portion of the basins in southwestern Ontario with anecdotal evidence of gas shows, yet there has been no commercial shale gas production to date. To provide baseline data in the case of future environmental issues related to hydraulic fracturing and shale gas production, such as leakage of natural gas, saline water, and/or hydraulic fracturing fluids, and to evaluate hydrogeochemical controls on natural gas accumulations in shallow groundwater in general, this study investigates the origin and distribution of natural gas and brine in shallow aquifers across southwestern Ontario. An extensive geochemical database of major ion and trace metal chemistry and methane concentrations of 1010 groundwater samples from shallow, domestic wells in bedrock and overburden aquifers throughout southwestern Ontario was utilized. In addition, select wells (n = 36) were resampled for detailed dissolved gas composition, δ¹³C of CH₄, C₂, C₃, and CO₂, and δD of CH₄. Dissolved gases in groundwater from bedrock and overburden wells were composed primarily of CH₄ (29.7–98.6 mol% of total gas volume), N₂ (0.8–66.2 mol%), Ar + O₂ (0.2–3.4 mol%), and CO₂ (0–1.2 mol%). Ethane was detected, but only in low concentrations (<0.041 mol%), and no other higher chain hydrocarbons were present, except for one well in overburden overlying the Dundee Formation, which contained 0.81 mol% ethane and 0.21 mol% propane. The highest methane concentrations (30 to >100 in situ % saturation) were found in bedrock wells completed in the Upper Devonian Kettle Point Formation, Middle Devonian Hamilton Group and Dundee Formation, and in surficial aquifers overlying these organic-rich shale-bearing formations, indicating that bedrock geology is the primary control on methane occurrences. A few (n = 40) samples showed Na–Cl–Br evidence of brine mixing with dilute groundwater, however only one of these samples contained high (>60 in situ % saturation) CH₄. The relatively low δ¹³C values of CH₄ (−89.9‰ to −57.3‰), covariance of δD values of CH₄ and H₂O, positive correlation between δ¹³C values of CH₄ and CO₂, and lack of higher chain hydrocarbons (C₃₊) in all but one dissolved gas sample indicates that the methane in groundwater throughout the study area is primarily microbial in origin. The presence or absence of alternative electron acceptors (e.g. dissolved oxygen, Fe, NO₃, SO₄), in addition to organic substrates, controls the occurrence of microbial CH₄ in shallow aquifers. Microbial methane has likely been accumulating in the study area, since at least the Late Pleistocene to the present, as indicated by the co-variance and range of δD values of CH₄ (−314‰ to −263‰) and associated groundwater (−19‰ to −6‰ δD-H₂O).     

Using dual isotopic data to track the sources and behaviors of dissolved sulfate in the western North China Plain

This paper investigated the sources and behaviors of sulfate in groundwater of the western North China Plain using sulfur and oxygen isotopic ratios. The groundwaters can be categorized into karst groundwater (KGW), coal mine drainage (CMD) and pore water (subsurface saturated water in interstices of unconsolidated sediment). Pore water in alluvial plain sediments could be further classified into unconfined groundwater (UGW) with depth of less than 30 m and confined groundwater (CGW) with depth of more than 60 m. The isotopic compositions of KGW varied from 9.3‰ to 11.3‰ for δ³⁴S_SO4 with the median value of 10.3‰ (n = 4) and 7.9‰ to 15.6‰ for δ¹⁸O_SO4 with the median value of 14.3‰ (n = 4) respectively, indicating gypsum dissolution in karst aquifers. δ³⁴S_SO4 and δ¹⁸O_SO4 values of sulfate in CMD ranged from 10.8‰ to 12.4‰ and 4.8‰ to 8.7‰ respectively. On the basis of groundwater flow path and geomorphological setting, the pore water samples were divided as three groups: (1) alluvial–proluvial fan (II₁) group with high sulfate concentration (median values of 2.37 mM and 1.95 mM for UGW and CGW, respectively) and positive δ³⁴S_SO4 and δ¹⁸O_SO4 values (median values of 8.8‰ and 6.9‰ for UGW, 12.0‰ and 8.0‰ for CGW); (2) proluvial slope (II₂) group with low sulfate concentration (median values of 1.56 mM and 0.84 mM for UGW and CGW, respectively) and similar δ³⁴S_SO4 and δ¹⁸O_SO4 values (median values of 9.0‰ and 7.4‰ for UGW, 10.2‰ and 7.7‰ for CGW); and (3) low-lying zone (II₃) group with moderate sulfate concentration (median values of 2.13 mM and 1.17 mM for UGW and CGW, respectively) and more positive δ³⁴S_SO4 and δ¹⁸O_SO4 values (median values of 10.7‰ and 7.7‰ for UGW, 20.1‰ and 8.8‰ for CGW). In the present study, three major sources of sulfate could be differentiated as following: sulfate dissolved from Ordovician to Permian rocks (δ³⁴S_SO4 = 10–35‰ and δ¹⁸O_SO4 = 7–20‰), soil sulfate (δ³⁴S_SO4 = 5.9‰ and δ¹⁸O_SO4 = 5.8‰) and sewage water (δ³⁴S_SO4 = 10.0‰ and δ¹⁸O_SO4 = 7.6‰). Kinetic fractionations of sulfur and oxygen isotopes as a result of bacterial sulfate reduction (BSR) were found to be evident in the confined aquifer in stagnant zone (II₃), and enrichment factors of sulfate–sulfur and sulfate–oxygen isotopes calculated by Rayleigh equation were −12.1‰ and −4.7‰ respectively along the flow direction of groundwater at depths of 60–100 m. The results obtained in this study confirm that detailed hydrogeological settings and identification of anthropogenic sources are critical for elucidating evolution of δ³⁴S_SO4 and δ¹⁸O_SO4 values along with groundwater flow path, and this work also provides a useful framework for understanding sulfur cycling in alluvial plain aquifers.     

Geochemical and isotopic approach to maturity/source/mixing estimations for natural gas and associated condensates in the Thrace Basin,NW Turkey

The Tertiary Thrace Basin located in NW Turkey comprises 9 km of clastic-sedimentary column ranging in age from Early Eocene to Recent in age. Fifteen natural gas and 10 associated condensate samples collected from the 11 different gas fields along the NW–SE extending zone of the northern portion of the basin were evaluated on the basis of their chemical and individual C isotopic compositions. For the purpose of the study, the genesis of CH₄, thermogenic C₂₊ gases, and associated condensates were evaluated separately.Methane appears to have 3 origins: Group-1 CH₄ is bacteriogenic (Calculated δ¹³C_C1–C = −61.48‰; Silivri Field) and found in Oligocene reservoirs and mixed with the thermogenic Group-2 CH₄. They probably formed in the Upper Oligocene coal and shales deposited in a marshy-swamp environment of fluvio-deltaic settings. Group-2 (δ¹³C_C1–C = −35.80‰; Hamitabat Field) and Group-3 (δ¹³C_1–C = −49.10‰; Değirmenköy Field) methanes are thermogenic and share the same origin with the Group-2 and Group-3 C₂₊ gases. The Group-2 C₂₊ gases include 63% of the gas fields. They are produced from both Eocene (overwhelmingly) and Oligocene reservoirs. These gases were almost certainly generated from isotopically heavy terrestrial kerogen (δ¹³C = −21‰) present in the Eocene deltaic Hamitabat shales. The Group-3 C₂₊ gases, produced from one field, were generated from isotopically light marine kerogen (δ¹³C = −29‰). Lower Oligoce ne Mezardere shales deposited in pro-deltaic settings are believed to be the source of these gases.The bulk and individual n-alkane isotopic relationships between the rock extracts, gases, condensates and oils from the basin differentiated two Groups of condensates, which can be genetically linked to the Group-2 and -3 thermogenic C₂₊ gases. However, it is crucial to note that condensates do not necessarily correlate to their associated gases.Maturity assessments on the Group-1 and -2 thermogenic gases based on their estimated initial kerogen isotope values (δ¹³C = −21‰; −29‰) and on the biomarkers present in the associated condensates reveal that all the hydrocarbons including gases, condensates and oils are the products of primary cracking at the early mature st age (R_eq = 0.55–0.81%). It is demonstrated that the open-system source conditions required for such an early-mature hydrocarbon expulsion exist and are supported by fault systems of the basin.     

Geochemical comparison between gas in fluid inclusions and gas produced from the Upper Triassic Xujiahe Formation,Sichuan Basin,SW China

Natural gas in the Xujiahe Formation of the Sichuan Basin is dominated by hydrocarbon (HC) gas, with 78–79% methane and 2–19% C₂₊ HC. Its dryness coefficient (C₁/C_1–5) is mostly < 0.95. The gas in fluid inclusions, which has low contents of CH₄ and heavy hydrocarbons (C₂₊) and higher contents of non-hydrocarbons (e.g. CO₂), is a typical wet gas produced by thermal degradation of kerogen. Gas produced from the Upper Triassic Xujiahe Formation (here denoted field gas) has light carbon isotope values for methane (δ¹³C₁: −45‰ to −36‰) and heavier values for ethane (δ¹³C₂: −30‰ to −25‰). The case is similar for gas in fluid inclusions, but δ¹³C₁ = −36‰ to −45‰ and δ¹³C₂ = −24.8‰ to −28.1‰, suggesting that the gas experienced weak isotopic fractionation due to migration and water washing. The field gas has δ¹³C_CO2 values of −15.6‰ to −5.6‰, while the gas in fluid inclusions has δ¹³C_CO2 values of −16.6‰ to −9‰, indicating its organic origin. Geochemical comparison shows that CO₂ captured in fluid inclusions mainly originated from source rock organic matter, with little contribution from abiogenic CO₂. Fluid inclusions originate in a relatively closed system without fluid exchange with the outside following the gas capture process, so that there is no isotopic fractionation. They thus present the original state of gas generated from the source rocks. These research results can provide a theoretical basis for gas generation, evolution, migration and accumulation in the basin.     

Molecular and isotopic partitioning of low-molecular-weight hydrocarbons during migration and gas hydrate precipitation in deposits of a high-flux seepage site

Detailed knowledge of the extent of post-genetic modifications affecting shallow submarine hydrocarbons fueled from the deep subsurface is fundamental for evaluating source and reservoir properties. We investigated gases from a submarine high-flux seepage site in the anoxic Eastern Black Sea in order to elucidate molecular and isotopic alterations of low-molecular-weight hydrocarbons (LMWHC) associated with upward migration through the sediment and precipitation of shallow gas hydrates. For this, near-surface sediment pressure cores and free gas venting from the seafloor were collected using autoclave technology at the Batumi seep area at 845 m water depth within the gas hydrate stability zone.Vent gas, gas from pressure core degassing, and from hydrate dissociation were strongly dominated by methane (> 99.85 mol.% of ∑[C₁–C₄, CO₂]). Molecular ratios of LMWHC (C₁/[C₂ + C₃] > 1000) and stable isotopic compositions of methane (δ¹³C = ? 53.5‰ V-PDB; D/H around ? 175‰ SMOW) indicated predominant microbial methane formation. C₁/C₂₊ ratios and stable isotopic compositions of LMWHC distinguished three gas types prevailing in the seepage area. Vent gas discharged into bottom waters was depleted in methane by > 0.03 mol.% (∑[C₁–C₄, CO₂]) relative to the other gas types and the virtual lack of ¹⁴C–CH₄ indicated a negligible input of methane from degradation of fresh organic matter. Of all gas types analyzed, vent gas was least affected by molecular fractionation, thus, its origin from the deep subsurface rather than from decomposing hydrates in near-surface sediments is likely.As a result of the anaerobic oxidation of methane, LMWHC in pressure cores in top sediments included smaller methane fractions [0.03 mol.% ∑(C₁–C₄, CO₂)] than gas released from pressure cores of more deeply buried sediments, where the fraction of methane was maximal due to its preferential incorporation in hydrate lattices. No indications for stable carbon isotopic fractionations of methane during hydrate crystallization from vent gas were found. Enrichments of ¹⁴C–CH₄ (1.4 pMC) in short cores relative to lower abundances (max. 0.6 pMC) in gas from long cores and gas hydrates substantiates recent methanogenesis utilizing modern organic matter deposited in top sediments of this high-flux hydrocarbon seep area.     

Chemical and isotope compositions of shallow groundwater in areas impacted by hydraulic fracturing and surface mining in the Central Appalachian Basin,Eastern United States

Hydraulic fracturing of shale deposits has greatly increased the productivity of the natural gas industry by allowing it to exploit previously inaccessible reservoirs. Previous research has demonstrated that this practice has the potential to contaminate shallow aquifers with methane (CH₄) from deeper formations. This study compares concentrations and isotopic compositions of CH₄ sampled from domestic groundwater wells in Letcher County, Eastern Kentucky in order to characterize its occurrence and origins in relation to both neighboring hydraulically fractured natural gas wells and surface coal mines. The studied groundwater showed concentrations of CH₄ ranging from 0.05 mg/L to 10 mg/L, thus, no immediate remediation is required. The δ¹³C values of CH₄ ranged from −66‰ to −16‰, and δ²H values ranged from −286‰ to −86‰, suggesting an immature thermogenic and mixed biogenic/thermogenic origin. The occurrence of CH₄ was not correlated with proximity to hydraulically fractured natural gas wells. Generally, CH₄ occurrence corresponded with groundwater abundant in Na⁺, Cl⁻, and HCO₃⁻, and with low concentrations of SO₄²⁻. The CH₄ and SO₄²⁻concentrations were best predicted by the oxidation/reduction potential of the studied groundwater. CH₄ was abundant in more reducing waters, and SO₄²⁻ was abundant in more oxidizing waters. Additionally, groundwater in greater proximity to surface mining was more likely to be oxidized. This, in turn, might have increased the likelihood of CH₄ oxidation in shallow groundwater.     

Geochemical constraint on origin and evolution of solutes in geothermal springs in western Yunnan,China

Geothermal resources are very rich in Yunnan, China. However, source of dissolved solutes in geothermal water and chemical evolution processes remain unclear. Geochemical and isotopic studies on geothermal springs and river waters were conducted in different petrological-tectonic units of western Yunnan, China. Geothermal waters contain Ca–HCO₃, Na–HCO₃, and Na (Ca)–SO₄ type, and demonstrate strong rock-related trace elemental distributions. Enhanced water–rock interaction increases the concentration of major and trace elements of geothermal waters. The chemical compositions of geothermal waters in the Rehai geothermal field are very complicated and different because of the magma chamber developed at the shallow depth in this area. In this geothermal field, neutral-alkaline geothermal waters with high Cl, B, Li, Rb Cs, As, Sb, and Tl contents and acid–sulfate waters with high Al, Mn, Fe, and Pb contents are both controlled by magma degassing and water–rock interaction. Geothermal waters from metamorphic, granite, and sedimentary regions (except in the Rehai area) exhibit varying B contents ranging from 3.31 mg/L to 4.49 mg/L, 0.23 mg/L to 1.24 mg/L, and <0.07 mg/L, respectively, and their corresponding δ¹¹B values range from −4.95‰ to −9.45‰, −2.57‰ to −8.85‰, and −4.02‰ to +0.06‰. The B contents of these geothermal waters are mainly controlled by leaching host rocks in the reservoir, and their δ¹¹B values usually decrease and achieve further equilibrium with its surrounding rocks, which can also be proven by the positive δ¹⁸O-shift. In addition to fluid–rock reactions, the geothermal waters from Rehai hot springs exhibit higher δ¹¹B values (−3.43‰ to +1.54‰) than those yielded from other areas because mixing with the magmatic fluids from the shallow magma. The highest δ¹¹B of steam–heated waters (pH 3.25) from the Zhenzhu spring in Rehai is caused by the fractionation induced by pH and the phase separation of coexisting steam and fluids. Given the strong water–rock interaction, some geothermal springs in western Yunnan show reservoir temperatures higher than 180 °C, which demonstrate potential for electricity generation and direct-use applications. The most potential geothermal field in western Yunnan is located in the Rehai area because of the heat transfer from the shallow magma chamber.     

Combining boron isotopes and carbamazepine to trace sewage in salinized groundwater: A case study in Cap Bon,Tunisia

The Korba aquifer on the east coast of Cape Bon has been overexploited since the 1960s with a resultant reversal of the hydraulic gradient and a degradation of the quality due to seawater intrusion. In 2008 the authorities introduced integrated water resources planning based on a managed aquifer recharge with treated wastewater. Water quality monitoring was implemented in order to determine the different system components and trace the effectiveness of the artificial recharge. Groundwater samples taken from recharge control piezometers and surrounding farm wells were analyzed for their chemical contents, for their B isotopes, a proven tracer of groundwater salinization and domestic sewage, and their carbamazepine content, an anti-epileptic known to pass through wastewater treatment and so recognized as a pertinent tracer of wastewater contamination. The system equilibrium was permanently disturbed by the different temporal dynamics of continuous processes such as cation exchange, and by threshold processes linked to oxidation–reduction conditions. The B isotopic compositions significantly shifted back-and-forth due to mixing with end-members of various origin. Under the variable contribution of meteoric recharge, the Plio-Quaternary groundwater (δ¹¹B of 35–40.6‰, a mean B concentration of 30 μmol/L, no carbamazepine, n = 7) was subject to seawater intrusion that induced a high δ¹¹B level (δ¹¹B of 41.5–48.0‰, a mean B concentration of 36 μmol/L, and n = 8). Fresh groundwater (δ¹¹B of 19.89‰, B concentration of 2.8 μmol/L, no carbamazepine) was detected close to the recharge site and may represent the deep Miocene pole which feeds the upper Plio-Quaternary aquifer. The managed recharge water (δ¹¹B of 10.67–13.8‰, n = 3) was brackish and of poor quality with a carbamazepine content showing a large short term variability with an average daily level of 328 ± 61 ng/L. A few piezometers in the vicinity of the recharge site gradually acquired a B isotopic composition close to the wastewater signature and showed an increasing carbamazepine content (from 20 to 910 ng/L). The combination of B isotopic signatures with B and carbamazepine contents is a useful tool to assess sources and mixing of treated wastewaters in groundwaters. Effluent quality needs to be greatly improved before injection to prevent further degradation of groundwater quality.     

Geology and fluid characteristics of the Ulu Sokor gold deposit,Kelantan, Malaysia: Implications for ore genesis and classification of the deposit

The Ulu Sokor gold deposit is one of the most famous and largest gold deposits in Malaysia and is located in the Central Gold Belt. This deposit consists of three major orebodies that are related to NS- and NE-striking fractures within fault zones in Permian-Triassic meta-sedimentary and volcanic rocks of the East Malaya Block. The faulting events represent different episodes that are related to each orebody and are correlated well with the mineralogy and paragenesis. The gold mineralization consists of quartz-dominant vein systems with sulfides and carbonates. The hydrothermal alteration and mineralization occurred during three stages that were characterized by (I) silicification and brecciation; (II) carbonatization, sericitization, and chloritization; and (III) quartz–carbonate veins.Fluid inclusions in the hydrothermal quartz and calcite of the three stages were studied. The primary CO₂–CH₄–H₂O–NaCl fluid inclusions in stage I are mostly related to gold mineralization and display homogenization temperatures of 269–389 °C, salinities of 2.77–11.89 wt.% NaCl equivalent, variable CO₂ contents (typically 5–29 mol%), and up to 15 mol% CH₄. In stage II, gold was deposited at 235–398 °C from a CO₂ ± CH₄–H₂O–NaCl fluid with a salinity of 0.83–9.28 wt.% NaCl equivalent, variable CO₂ contents (typically 5–63 mol%), and up to 4 mol% CH₄. The δ¹⁸O_H2O and δD values of the ore-forming fluids from the stage II quartz veins are 4.5 to 4.8‰ and − 44 to − 42‰, respectively, and indicate a metamorphic–hydrothermal origin. Oxygen fugacities calculated for the entire range of T-P-X_CO2 conditions yielded log f_O2 values between − 28.95 and − 36.73 for stage I and between − 28.32 and − 39.18 for stage II. These values indicate reduced conditions for these fluids, which are consistent with the mineral paragenesis, fluid inclusion compositions, and isotope values.The presence of daughter mineral-bearing aqueous inclusions is interpreted to be a magmatic signature of stage IIIa. Combined with the oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 6.8 to 11.9‰, δD = − 77 to − 62‰), these inclusions indicate that the initial fluid was likely derived from a magmatic source. In stage IIIb, the gold was deposited at 263° to 347 °C from a CO₂–CH₄–H₂O–NaCl fluid with a salinity of 5.33 to 11.05 wt.% NaCl equivalent, variable CO₂ contents (typically 9–15 mol%), and little CH₄. The oxygen and hydrogen isotopic compositions of this fluid (δ¹⁸O_H2O = 8.1 to 8.8‰, δD = − 44 to − 32‰) indicate that it was mainly derived from a metamorphic–hydrothermal source. The CO₂–H₂O ± CH₄–NaCl fluids that were responsible for gold deposition in the stage IIIc veins had a wide range of temperatures (214–483 °C), salinities of 1.02 to 21.34 wt.% NaCl equivalent, variable CO₂ contents (typically 4–53 mol%), and up to 7 mol% CH₄. The oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 8.5 to 9.8‰, δD = − 70 to − 58‰) were probably acquired at the site of deposition by mixing of the metamorphic–hydrothermal fluid with deep-seated magmatic water and then evolved by degassing at the site of deposition during mineralization. The log f_O2 values from − 28.26 to − 35.51 also indicate reduced conditions for this fluid in stage IIIc. Moreover, this fluid had a near-neutral pH and δ³⁴S values of H₂S of − 2.32 to 0.83‰, which may reflect the derivation of sulfur from the subducted oceanic lithospheric materials.The three orebodies represent different gold transportation and precipitation models, and the conditions of ore formation are related to distinct events of hydrothermal alteration and gold mineralization. The gold mineralization of the Ulu Sokor deposit occurred in response to complex and concurrent processes involving fluid immiscibility, fluid–rock reactions, and fluid mixing. However, fluid immiscibility was the most important mechanism for gold deposition and occurred in these orebodies, which have corresponding fluid properties, structural controls, geologic characteristics, tectonic settings, and origins of the ore-forming matter. These characteristics of the Ulu Sokor deposit are consistent with its classification as an orogenic gold deposit, while some of the veins are genetically related to intrusions.     

Geology,mineralization, stable isotope,and fluid inclusion characteristics of the Vostok-2 reduced W-Cu skarn and Au-W-Bi-As stockwork deposit,Sikhote-Alin,Russia

The large (>180 Kt WO₃ and at least 10–15 t Au) Vostok-2 deposit is situated in a metallogenic belt of W, Sn-W, Au, and Au-W deposits formed in late to post-collisional tectonic environment after cessation of active subduction. The deposit is related to an ilmenite-series high-K calc-alkaline plutonic suite that, by its petrologic signatures, is transitional between those at W-dominant and Au-dominant reduced intrusion-related deposits. Consistently, besides large W-Cu skarns of the reduced type, the deposit incorporates quartz stockworks with significant Au-W-Bi mineralization also formed in a reduced environment. The hydrothermal stages include prograde and retrograde, essentially pyroxene skarns, hydrosilicate (amphibole, chlorite, quartz) alteration, and phyllic (quartz, sericite, albite, apatite, and carbonate) alteration assemblages. These assemblages contain abundant scheelite associated with pyrrhotite, chalcopyrite and, at the phyllic stage, also with Bi minerals, As-Bi-Sb-Te-Pb-Zn sulfides and sulfosalts, as well as Au mineralization. The fluid evolution included hot, high-pressure (420–460 °C, 1.1–1.2 kbar), low-salinity (5.4–6.0 wt% NaCl-equiv.) aqueous fluids at the retrograde skarn stage, followed by lower temperature cyclic releases of high-carbonic, low salinity to non-carbonic moderate-salinity aqueous fluids. At the hydrosilicate stage, a high-carbonic, CH₄-dominated, hot (350–380 °C) low salinity fluid was followed by cooler (300–350 °C) non-carbonic moderate-salinity (5.7–14.9 wt% NaCl-equiv.) fluid. At the phyllic stage, a high-carbonic, CO₂-dominated, moderately-hot (330–355 °C, 0.9 kbar) low salinity fluid was followed by cooler (230–265 °C) non-carbonic moderate-salinity (6.6–12.0 wt% NaCl-equiv.) fluid. A homogenized magmatic source of water (δ¹⁸O_H2O = +8.3 to +8.7‰), and a sedimentary source of sulfur (δ³⁴S = −6.9 to −6.2‰) and carbon (δ¹³C_fluid = −20.1 to −14.9‰) at the hydrosilicate stage are suggested. A magmatic source of water (δ¹⁸O = +8.6 to +9.2‰) and a sedimentary source of sulfur (δ³⁴S = −9.3 to −4.1‰) but a magmatic (mantle- to crustal-derived) source of carbon (δ¹³C_fluid = −6.9 to −5.2‰) are envisaged for fluids that formed the early mineral assemblage of the phyllic stage. Then, the role of sedimentary carbon again increased toward the intermediate (δ¹³C_fluid = −16.4 to −14.5‰) and late (δ¹³C_fluid = −16.3 to −14.7‰) phyllic mineral assemblages. The magmatic differentiation was responsible for the fluid enrichment in W, whereas Au and Bi could also have been sourced from mafic magma. The decreasing temperatures, together with elevated Ca content in non-boiling fluids, promoted scheelite deposition at the early hydrothermal stages. The most intense scheelite deposition at the phyllic stage was caused by CO₂ removal due to boiling of CO₂-rich fluids; further cooling of non-boiling fluids favoured joint deposition of scheelite, Bi and Au.     

Geochemistry of mineral water and gases of the Razdolnoe Spa (Primorye,Far East of Russia)

New isotopic and chemical data on the sodium bicarbonate water and associated gases from the Razdolnoe Spa located in the coastal zone of Primorsky Kray of the Russian Far East, together with previous stable isotope data (δ¹⁸O, δD, δ¹³C), allow elucidation of the origin and evolution of the groundwater and gases from the spa. The water is characterized by low temperature (12 °C), TDS – 2.5–6.0 g/L, high contents of B (∼5 mg/L) and F (4.5 mg/L) and low contents of Cl and SO₄. Water isotopic composition indicates its essentially meteoric origin which may comply with an older groundwater that was recharged under different (colder) climatic conditions. Major components of bubbling gases are CH₄ (68 vol%), N₂ (28%) and CO₂ (4%). The obtained values δ¹³C and δD for CO₂ and CH₄ definitely indicate the marine microbial origin of methane. Thus the high methane content in the waters relates to the biochemical processes and presence of a dispersed organic matter in the host rocks. Based on the regional hydrogeology and the geological structure of the Razdolnoe Spa, Mesozoic fractured rocks containing Na–HCO₃ mineral water and gases are reservoir rocks, a chemical composition of water and gases originates in different environmental conditions.     

The application of isotope and chemical analyses in managing transboundary groundwater resources

Managing transboundary groundwater resources requires accurate and detailed knowledge of aquifers and groundwater bodies. The Pannonian Basin is the largest intracontinental basin in Europe with a continuous succession of more than 7 km of Miocene to Quaternary sediments and with an average geothermal gradient of about 5 °C/100 m. Geographically the Pannonian basin overlaps eight countries (Hungary, Romania, Serbia, Croatia, Slovenia, Austria, Slovakia and Ukraine), so the issue of transboundary cold and thermal water resources is regionally very important. The T-JAM bilateral Hungarian–Slovenian (HU–SLO) project is the first to apply modern isotopic and chemical analyses in the characterization and correlation of a number of shared groundwater resources in the Mura-Zala Sub-basin of the Pannonian. The aims of this work were the identification of groundwater flow paths, the delineation of transboundary aquifers based on thermal and cold groundwater geochemical and isotope properties in the Mura-Zala Basin, and providing input to calibrate a hydraulic numerical model. Following a common groundwater sampling campaign, 24 cold and thermal groundwater samples from seven aquifers were collected for chemical, isotope, gas and noble gas analyses. Chemical analyses, and D, O and C isotopes were used to correlate cross border aquifers. A regional groundwater flow is hydrogeologically possible in some aquifers in the Mura-Zala Basin, and has been confirmed by hydrogeochemistry. The Újfalu (HU) and Mura (SLO) Formations are a part of the active regional thermal groundwater flow system, probably hydraulically separated from the shallower flow system of the Ptuj-Grad (SLO), Zagyva and Somló-Tihany (HU) Formations. The thermal water is of meteoric origin, reductive and alkaline. The predominant water type in the Quaternary and Pliocene aquifers is Ca–Mg–HCO₃, changing to Na–HCO₃ in the main Pannonian geothermal aquifer, and Na–Cl brine in deeper and older Miocene aquifers. Total dissolved solids and Na content generally increase with depth. Deuterium is in the range −87‰ to −75‰, ¹⁸O from −11.9‰ to −10.4‰, while ¹⁴C values are less than 6.1 pmC in the samples of the active regional thermal groundwater flow system. These and results of noble gas analyses indicate recharge during the Pleistocene interglacial period with temperatures around 6–7 °C. Regional thermal water resources are limited and environmental isotopes can be used as an early warning in the management of thermal water.     

Hydro-geochemical and isotopic fluid evolution of the Los Azufres geothermal field,Central Mexico

Hydrothermal alteration at Los Azufres geothermal field is mostly propylitic with a progressive dehydration with depth and temperature increase. Argillic and advanced argillic zones overlie the propylitic zone owing to the activity of gases in the system. The deepest fluid inclusions (proto-fluid) are liquid-rich with low salinity, with NaCl dominant fluid type and ice melting temperatures (T_mi) near zero (0 °C), and salinities of 0.8 wt% NaCl equivalent. The homogenization temperature (T_h)  = 325 ± 5 °C. The boiling zone shows T_h = ±300 °C and apparent salinities between 1 and 4.9 wt% NaCl equivalent, implying a vaporization process and a very important participation of non-condensable gases (NCGs), mostly CO₂. Positive clathrate melting temperatures (fusion) with T_h = 150 °C are observed in the upper part of the geothermal reservoir (from 0 to 700 m depth). These could well be the evidence of a high gas concentration. The current water produced at the geothermal wells is NaCl rich (geothermal brine) and is fully equilibrated with the host rock at temperatures between T = 300 and 340 °C. The hot spring waters are acid-sulfate, indicating that they are derived from meteoric water heated by geothermal steam. The NCGs related to the steam dominant zone are composed mostly of CO₂ (80–98% of all the gases). The gases represent between 2 and 9 wt% of the total mass of the fluid of the reservoir.The authors interpret the evolution of this system as deep liquid water boiling when ascending through fractures connected to the surface. Boiling is caused by a drop of pressure, which favors an increase in the steam phase within the brine ascending towards the surface. During this ascent, the fluid becomes steam-dominant in the shallowest zone, and mixes with meteoric water in perched aquifers. Stable isotope compositions (δ¹⁸O–δD) of the geothermal brine indicate mixing between meteoric water and a minor magmatic component. The enrichment in δ¹⁸O is due to the rock–water interaction at relatively high temperatures. δ¹³C stable isotope data show a magmatic source with a minor meteoric contribution for CO₂. The initial isotopic value δ³⁴S_RES = −2.3‰, which implies a magmatic source. More negative values are observed for shallow pyrite and range from δ³⁴S (FeS₂) = −4‰ to −4.9‰, indicating boiling. The same fractionation tendencies are observed for fluids in the reservoir from results for δ¹⁸O.     

Statistical categorization geochemical modeling of groundwater in Ain Azel plain (Algeria)

Water analysis data of 54 groundwater samples from 18 uniformly distributed wells were collected during three campaigns (June, September and December 2004). Q-mode hierarchical cluster analysis (HCA) was employed for partitioning the water samples into hydrochemical facies. Interpretation of analytical data showed that the abundance of major ions was identified as follows: Ca ? Mg > Na > K and HCO₃ ? Cl > SO₄. Three major water facies are suggested by the HCA analysis. The samples from the area were classified as recharge area waters (Ca–Mg–HCO₃ water), transition area waters (Mg–Ca–HCO₃–Cl water), and discharge area waters (Mg–Ca–Cl–HCO₃ water). Inverse geochemical modeling suggests that relatively few phases are required to derive the water chemistry in the area. In a broad sense, the reactions responsible for the hydrochemical evolution in the area fall into two categories: (1) evaporite weathering reactions and (2) precipitation of carbonate minerals.     

Characterisation and isotopic evolution of saline waters of the Outokumpu Deep Drill Hole,Finland – Implications for water origin and deep terrestrial biosphere

The isotopic composition of water and dissolved Sr as well as other geochemical parameters at the 2516 m deep Outokumpu Deep Drill Hole, Finland were determined. The drill hole is hosted by Palaeoproterozoic turbiditic metasediments, ophiolite-derived altered ultramafic rocks and pegmatitic granitoids. Sodium–Ca–Cl and Ca–Na–Cl-rich waters (total dissolved solids up to ca. 70 g L⁻¹) containing significant amounts of gas, mainly CH₄ (up to 32 mmol L⁻¹), N₂ (up to 10 mmol L⁻¹), H₂ (up to 3.1 mmol L⁻¹) and He (up to 1.1 mmol L⁻¹) discharge from fracture zones into the drill hole. This water is distinct from the shallow fresh groundwater of the area, and has an isotopic composition typical of shield brines that have been modified during long-term water–rock interaction. Based on water stable isotopes and geochemistry, the drill hole water profile can be divided into five water types, each discharging from separate fracture systems and affected by the surrounding rocks. The δ²H varies from −90‰ to −56‰ (VSMOW) and δ¹⁸O from −13.5‰ to −10.4‰ (VSMOW), plotting clearly above the Global and Local Meteoric Water Lines on a δ²H vs. δ¹⁸O diagram. The ⁸⁷Sr/⁸⁶Sr ratios range between 0.72423 and 0.73668. Simple two-component mixing between ²H and ¹⁸O rich end-member brine and meteoric water cannot explain the water stable isotopic composition and trends observed. Instead, hydration of silicates by ancient groundwaters recharged under different climatic conditions, warmer than at present, is the most likely mechanism to have caused the variation of the δ²H and δ¹⁸O values. Water types correlate with changes in microbial communities implying that different ecosystems occur at different depths. The different water types and microbial populations have remained isolated from each other and from the surface for long periods of time, probably tens of millions of years.     

In situ LA–MC–ICP–MS boron isotope and zircon U–Pb age determinations of Paleoproterozoic borate deposits in Liaoning Province,northeastern China

A large number of Paleoproterozoic borate deposits are hosted by the lower units of a volcanic-sedimentary sequence in Liaoning Province, northeastern China, and are a major source of boron in China. The ore-bearing wall rocks in the deposits are serpentinized ultrabasic rocks and carbonates, with layered leptynites, leptites, amphibolites, and migmatites adjacent to the ore. Both the borate ores and country rocks contain tourmaline, although the country rocks have much lower abundances of the mineral. Based on in situ boron isotope measurements using laser ablation–multi-collector–inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS), boron isotope data show that: (1) δ¹¹B values of borate ores range from + 6.8‰ to + 13.9‰ (mean + 10.8‰); (2) tourmalines from the borate ores have δ¹¹B values from + 9.5‰ to + 12.7‰; and (3) the wall rocks within the borate ores yield slightly lower δ¹¹B values ranging from + 5.7‰ to + 7.6‰, and those outside the deposits from − 9.9‰ to − 5.9‰. Positive δ¹¹B values in borates as well as in tourmalines inside the mining area indicate that boron in these Paleoproterozoic borate deposits was derived from marine evaporites. δ³⁴S_V-CDT (where V-CDT is Vienna Canyon Diablo Troilite) values of borate ores, serpentinized marbles, and anhydrites range from + 16.1‰ to + 24.7‰, whereas δ¹³C_V-PDB (where V-PDB is Vienna Pee Dee Belemnite) values of marbles range from + 3.2‰ to + 5.9‰. These isotopic characteristics are interpreted to reflect formation in a marine evaporative environment. LA–MC–ICP–MS zircon weighted²⁰⁷Pb/²⁰⁶Pb ages of leptite and serpentinized olivine basalt from the hanging wall of the borate deposits are 2139 ± 13 Ma and 2130 ± 19 Ma, respectively. Therefore, the (~ 2.2 Ga) borate deposits may have originated from marine evaporative boron-bearing sediments, which were interbedded within bimodal volcanic rocks during the early stages of development of the Liaoji rift.     

A rapid method for preparing low volume CH4 and CO2 gas samples for 14C AMS analysis

¹⁴C measurements of CH₄ in environmental samples (e.g. soil gas, lake water, gas hydrates) can advance understanding of C cycling in terrestrial and marine systems. The measurements are particularly useful for detecting the release of old C from climate sensitive environments such as peatlands and hydrate fields. However, because ¹⁴C CH₄ measurements tend to be complex and time consuming, they are uncommon. Here, we describe a novel vacuum line system for the preparation of CH₄ and CO₂ from environmental samples for ¹⁴C analysis using accelerator mass spectrometry (AMS). The vacuum line is a flow-through system that allows rapid preparation of samples (1 h for CH₄ and CO₂, 30 min for CH₄ alone), complete separation of CH₄ and CO₂ and is an easy addition to multipurpose CO₂ vacuum lines already in use. We evaluated the line using CH₄ and CO₂ standards with different ¹⁴C content. For CH₄ and CO₂, respectively, the total line blank was 0.4 ± 0.2 and 1.4 ± 0.6 μg C, the ¹⁴C background 51.1 ± 1.2 and 48.4 ± 1.5 kyr and the precision (based on pooled standard deviation) 0.9‰ and 1.3‰. The line was designed for sample volumes of ca. 180 ml containing 0.5–1% CH₄ and CO₂, but can be adjusted to handle lower concentration and larger volume samples. This rapid and convenient method for the preparation of CH₄ and CO₂ in environmental samples for ¹⁴C AMS analysis should provide more opportunities for the use of ¹⁴C CH₄ measurements in C cycle studies.     

Intermediate sulfidation epithermal gold-base metal deposits in Tertiary subaerial volcanic rocks,Sahinli/Tespih Dere (Lapseki/Western Turkey)

Gold in the Sahinli and Tespih Dere intermediate sulfidation gold-base metal deposits in Western Turkey occurs in relatively deep epithermal quartz veins along with base metal minerals which have epithermal textures, including plumose quartz, vug infills, comb and cockade textures and matrix-supported milled breccias. The total sulfide content of the veins in the area is variable ranging from < 1% to 60% and is dominated by pyrite, galena, sphalerite and chalcopyrite. Sphalerite is Fe-poor (0.6 to 1.4 mol% FeS). Minor amounts of Ag-rich tetrahedrite are present. Primary hydrothermal alteration minerals include illite/muscovite, mixed-layer illite/smectite (11.6 Å) and clinochlore towards the east and, alunite, dickite/nacrite and pyrophyllite towards the west at Sahinli; major illite/muscovite and dickite occur at Tespih Dere and Sarioluk, respectively.Fluid inclusions in main-stage quartz at Sahinli are only liquid-rich, with homogenization temperatures ranging from 220 to 322 °C and the majority of T_h values between 250 and 300 °C. Salinity ranges from 4.3 to 6.9 wt.% NaCl equiv. First ice-melting temperatures (T_mf) between ?24.5 and ?19.0 °C indicate that the fluids were dominated by NaCl – H₂O during mineralization. The relatively higher average T_h at the Tespih Dere deposit (295 °C) is attributed to a relatively deeper level of exposure.Calculated δ¹⁸O values indicate that ore-forming hydrothermal fluids in the study area had δ¹⁸O_H2O ranging from + 1.1 to + 9.7‰ (average = 3.8‰), strongly ¹⁸O-enriched compared with present-day hydrothermal meteoric water in the area (δ¹⁸O = ?8.5‰). δD values of fluid inclusions in quartz range from ?58 to ?93‰ and δD values of clay minerals and alunite from ?40 to ?119‰. δD values from intermediate argillic alteration (average = ?68‰) in the study area are very similar to δD values of the present-day local geothermal system (average δD = ?54‰) whereas δD values from advanced-argillic alteration (average δD = ?33‰) are very different from the present-day local geothermal system.The δ³⁴S values in samples from the Sahinli and Tespih Dere deposits average ?2.9‰ for pyrite; ?3.3‰ for chalcopyrite; ?5.4‰ for sphalerite and ?7.6‰ for galena. These data are consistent with derivation of the sulfur from either igneous rocks or possibly from local wallrock.     

An experimental comparison of gas generation from three oil fractions: Implications for the chemical and stable carbon isotopic signatures of oil cracking gas

Although oil cracking has been documented as one of the important sources of gas in many overmature marine sedimentary basins, the chemical and carbon isotopic signatures of gases of this origin are still open to question. In this study a Cambrian crude oil from the central Tarim basin, along with its main separated fractions (saturates, aromatics and asphaltenes), were pyrolyzed in sealed gold tubes to investigate how generated gases vary in chemical and carbon isotopic composition and how this variation would influence the genetic interpretation of oil cracking gas. The results indicate that the gases from cracking of aromatics and asphaltenes are much drier and more enriched in ¹³C than the gases from the cracking of saturates and crude oil at the same level of thermal maturity. In the experimental run of 20 °C/h, the dryness index of the gases (defined as the volume percentage of C₁ in C_1–5) from the cracking of saturates ranges from 26.2–90.6% with the methane carbon isotope change ranging from −54.8‰ to −35.5‰, whereas the dryness index is never lower than 60.6% for the gases from the cracking of aromatics with methane carbon isotope ranging from −39.9‰ to −32.2‰. Correspondingly, experimental data for the four samples plot in different areas in diagrams designed to distinguish oil cracking gas from kerogen cracking gas, such as ln(C₂/C₃) vs. δ¹³C₂–δ¹³C₃ and δ¹³C₁ vs. δ¹³C₂–δ¹³C₃, indicating compositional variability of crude oil could assert an important influence in these diagrams. Therefore it is prudent to bring other geological constraints into consideration to avoid misinterpretation.The kinetic parameters for the bulk generation of C_1–5 gas and the methane carbon isotope fractionation extrapolated to geological conditions of 2 °C/Ma and an initial temperature of 50 °C show that the temperatures of C_1–5 gas generation from the aromatics and asphaltenes are lower than those from the saturates and crude oil due to their lower activation energies and frequency factors. Generation of C_1–5 gases from the aromatics is modeled to be initiated about 122 °C whereas the initiation temperature for the saturates sample is 176 °C. Below 189 °C (EasyRo = 1.8%), the yields of C_1–5 gases follow the order: aromatics > asphaltenes > crude oil > saturates. At similar thermal maturity levels, the methane carbon isotopic compositions are significantly different for the four samples, with an order of ¹³C enrichment: aromatics > asphaltenes > crude oil > saturates, however the difference in methane carbon isotopes becomes smaller with increasing temperature. This indicates that methane carbon isotopic values can be significantly different for gases cracked from oils that are compositionally diverse, especially in the early stage of methane generation.     

Stable carbon isotope geochemistry of adsorbed alkane gases in near-surface soils of the Saurashtra Basin,India

The stable carbon isotopic compositions of light hydrocarbon gases adsorbed in near-surface soil and sediments from the Saurashtra basin were characterized for their origin and maturity. Saurashtra is considered geologically prospective for oil and gas reserves; however, a major part of the basin is covered by the Deccan Traps, hindering the exploration of Mesozoic hydrocarbon targets. Surface geochemical prospecting, based on micro-seepage of hydrocarbons from subsurface accumulations, could be advantageous in such areas. In light of this, 150 soil samples were collected from the northwestern part of Saurashtra, around the Jamnagar area, where a thick sedimentary sequence of about 2–3 km exists under 1–1.5 km of Deccan basalt. The concentration of acid desorbed alkane gases from soil samples was found to vary (in ppb) as: methane (C₁) = 3–518; ethane (C₂) = 0–430; propane (C₃) = 0–331; i-butane (iC₄) = 0–297; n-butane (nC₄) = 2–116; i-pentane (iC₅) = 0–31 and n-pentane (nC₅) = 0–23, respectively.Fifteen samples with high concentrations of alkane gases were measured for their δ¹³C₁; δ¹³C₂ and δ¹³C₃ compositions using gas chromatography–combustion-isotope ratio mass spectrometry (GC–C-IRMS). The values for methane varied from ? 27 to ? 45.4‰, ethane from ? 20.9 to ? 27.6‰, and propane from ? 20.4 to ? 29.1‰ versus the Vienna PeeDee Belemnite (VPDB). The carbon isotope ratio distribution pattern represents isotopic characteristics pertaining to hydrocarbon gases derived from thermogenic sources. Comparisons of carbon isotopic signatures and compositional variations with the standard carbon isotopic models suggest that hydrocarbon gases found in the shallow depths of the study area are not of bacterial origin but are formed thermally from deeply buried organic matter, likely to be mainly a terrestrial source rock with a partial contribution from a marine source. These gases may have migrated to the near-surface environment, where they represent an admixture of thermally generated hydrocarbon gases from mixed sources and maturity. The maturity scale (δ¹³C versus Log Ro %) applied to the surface sediment samples of the Jamnagar area indicated the source material to be capable of generating oil and gas. The detection of thermogenic alkane gases in near-surface sediments offers the possibility of hydrocarbons at depth in Saurashtra.