Total concentration,speciation and mobility of potentially toxic elements in soils around a mining area in central Iran

The current study was designed to investigate the extent and severity of contamination as well as the fractionation of potentially toxic elements (As, Cd, Cr, Cu, Pb, Zn, Ni) in minesoils and agricultural soils around a Pb–Zn mine in central Iran. For this purpose, 20 agricultural soils and eight minesoils were geochemically characterized. Results showed that minesoils contained elevated concentrations of As (12.9–254 mg kg⁻¹), Cd (1.2–55.1 mg kg⁻¹), Pb (137–6239 mg kg⁻¹) and Zn (516–48,889 mg kg⁻¹). The agricultural soils were also polluted by As (5.5–57.1 mg kg⁻¹), Cd (0.2–8.5 mg kg⁻¹), Pb (22–3451 mg kg⁻¹) and Zn (94–9907 mg kg⁻¹). The highest recorded concentrations for these elements were in soils influenced directly by tailing ponds. Chromium, Cu and Ni content in agricultural soils (with average value of 74.1, 34.6 and 50.7 mg kg⁻¹, respectively) were slightly higher than the minesoils (with average value of 54.5, 33.1 and 43.4 mg kg⁻¹, respectively). Sequential extraction data indicated that there were some differences between the speciation of PTEs in soil samples. In the agricultural soils, Zn and Cd were mainly associated with carbonate bound fraction, As and Pb with reducible fraction, Cu with oxidisable fraction and Cr and Ni with residual phase. With respect to mobility factor values, Zn and Cd in the agricultural soils have been found to be the most mobile while As mobility is negligible. Also, the mobility factor of As, Cd and Pb in agricultural soils adjoining tailing ponds was high. In minesoil sample Cd was most abundant in the carbonate form, whereas other studied elements were mainly present in the reducible and residual fractions; therefore, despite the high total concentrations of As, Pb and Zn in the minesoils, the environmental risk of these elements was low. Based on the obtained data, a portion of Cu, Cr and Ni input was from agricultural activities.     

Mercury and methylmercury in riparian soil,sediments, mine-waste calcines,and moss from abandoned Hg mines in east Guizhou province,southwestern China

Concentrations of total Hg and methylmercury (MMHg) in riparian soil, mine-waste calcine, sediment, and moss samples collected from abandoned Hg mines in Wanshan district, Guizhou province, China, were measured to show regional dispersion of Hg-contamination. High total Hg and MMHg concentrations obtained in riparian soils from mined areas, ranged from 5.1 to 790 mg kg⁻¹ and 0.13 to 15 ng g⁻¹, respectively. However, total Hg and MMHg concentrations in the soils collected from control sites were significantly lower varying from 0.1 to 1.2 mg kg⁻¹ and 0.10 to 1.6 ng g⁻¹, respectively. Total Hg and MMHg concentrations in sediments varied from 90 to 930 mg kg⁻¹ and 3.0 to 20 ng g⁻¹, respectively. Total Hg concentrations in mine-waste calcines were highly elevated ranging from 5.7 to 4400 mg kg⁻¹, but MMHg concentrations were generally low ranging from 0.17 to 1.1 ng g⁻¹. Similar to the high Hg concentrations in soil and sediments, moss samples collected from rocks ranged from 1.0 to 95 mg kg⁻¹ in total Hg and from 0.21 to 20 ng g⁻¹ in MMHg. Elevated Hg concentrations in mosses suggest that atmospheric deposition might be an important pathway of Hg to the local terrestrial system. Moreover, the spatial distribution patterns of Hg contamination in the local environment suggest derivation from historic Hg mining sites in the Wanshan area.     

Scenario of particulate trace metal and metalloid transport during a major flood event inferred from transient geochemical signals

High-resolution sampling (every 3 h) of SPM was performed during a major flood event in a heterogeneous, medium scale watershed of the Garonne-Gironde fluvial-estuarine system (the Lot River; A = 10,700 km²; Q = 151 m³/s). Particulate metal and metalloid (Cd, Zn, Pb, Co, Cr, Ni, Mo, V, U, As, Sb, Th) concentrations were compared with monthly data of the same site (Temple site) obtained during 1999–2002. During the flood event, suspended particulate matter (SPM) concentrations closely followed river discharge with a maximum value (1530 mg/L) coinciding with the discharge peak (2970 m³/s). Trace metal/metalloid concentrations showed significant temporal variations and very contrasted responses. Particulate concentrations were similar to baseline values at the beginning of the flood and mostly increased during the event, showing anticlockwise and complex shape hystereses. Comparison of SPM yield (440,000 t) and particulate metal/metalloid fluxes during the flood with annual fluxes (1999–2002) highlights the great importance of major flood events in fluvial transport. Adequate sampling frequency during floods is necessary for reliable annual flux estimates and provides geochemical signals that may greatly improve our understanding of fluvial transport processes. The scenario of SPM and metal and metalloid transport during the flood are reconstructed by combining variations of Zn, Cd and Sb concentrations, concentration ratios (e.g. Zn/Cd, As/Th, Cd/Th) and hysteresis loops. Changes in SPM and metal/metalloid transport during distinct key stages of the flood were attributed to successive dominance of different water masses transporting material from different sources (e.g. industrial point source, bed sediment from reservoirs, plain erosion). Flood management (dam flushing) clearly enhanced the remobilization of up to 30-a old polluted sediment from reservoir lakes. Sediment remobilization accounted for ∼185,000 t of SPM (i.e. 42% of the total SPM fluxes during the flood) and strongly contributed to particulate metal/metalloid transport for Cd (90%), Zn (83%) and Pb (61%). Therefore, flood management needs to be taken into consideration in future models for erosion and pollutant transport.     

Mercury in the Lot–Garonne River system (France): Sources,fluxes and anthropogenic component

Dissolved and particulate Hg fluxes in the Lot–Garonne–Gironde fluvial-estuarine system were obtained from observation of daily discharge and suspended particulate matter (SPM) concentrations. In addition to the measurements of the total dissolved (<0.45 μm) and particulate Hg (>0.45 μm), called HgT_D and HgT_P respectively, the dissolved inorganic Hg species (HgR_D) were determined monthly. Geochemical background values for HgT_P in sediments and SPM were similar to crustal values and to typical concentrations in SPM of non-contaminated river systems, respectively. The Riou Mort watershed already known as the origin of important historical polymetallic (e.g., Cd, Zn) pollution was identified as an important Hg point source. In the downstream Lot River, Hg concentrations were clearly higher than those in other moderately contaminated systems. The mean relative contribution of HgR_D to HgT_D in the Lot River and in the Garonne River was close to 25% and 50%, respectively, and showed no correlation with water discharge or SPM concentration. Depending on the origin and nature of SPM, HgT_P concentrations were correlated or not with particulate organic C (POC). Maximum HgT_P concentrations were measured in samples containing low POC concentrations and were attributed to sediment resuspension. In contrast, high POC concentrations (6–17%) during algal blooms were associated with low/moderate HgT_P concentrations (<0.5 mg kg⁻¹) at different sites, suggesting that Hg concentrations in fluvial phytoplankton may be limited by bioavailability of dissolved Hg and/or physiologically controlled Hg accumulation. Mercury was mostly (up to 98%) transported in the particulate phase with estimated annual Hg fluxes at the outlet of the Lot River system ranging from 35 to 530 kg a⁻¹ for the past decade. The minimum anthropogenic component (58–84% of total Hg fluxes) could not be explained by present Riou Mort point source contributions, suggesting important Hg release from contaminated sediment as a major source and from downstream point sources (e.g., coal-fired power plants and/or metal processing industries). HgT_P concentrations and fluxes were strongly related to hydrologic variations and were clearly increased by riverbed dredging during lock construction. Therefore, the estimated Hg stocks in the Lot River sediment (5–13 tons) represent an important potential Hg source for the downstream fluvial-estuarine system.     

Dynamics of coarse particulate matter in the turbidity maximum zone of the Gironde Estuary

There is a lack of studies devoted to coarse particulate matter (CPM) in estuaries, although this fraction can disturb activities that filter large volumes of water, such as industrial or fishery activities. In the macrotidal and highly-turbid Gironde Estuary, a monthly sampling of CPM was performed in 2011 and 2013 at two stations in the Turbidity Maximum Zone (TMZ) to understand its seasonal, tidal and hydrological dynamics. Regardless of the season and station, low quantities of CPM (few g m⁻³) were observed in comparison with suspended particulate matter (several 10³ g m⁻³). The highest concentrations were consistently recorded in bottom waters and at the upstream station. Whereas there is no clear link between the CPM present in the column water and spring or neap tides, an increase in the CPM size has been identified at the two stations after a flood event, fact potentially critical regarding filtering functioning of estuarine activities.     

Gold mining related mercury contamination in Tongguan,Shaanxi Province,PR China

Elemental Hg–Au amalgamation mining practices are used widely in many developing countries resulting in significant Hg contamination of surrounding ecosystems. The authors examined for the first time Hg contamination in air, water, sediment, soil and crops in the Tongguan Au mining area, China, where elemental Hg has been used to extract Au for many years. Total gaseous Hg (TGM) concentrations in ambient air in the Tongguan area were significantly elevated compared to regional background concentrations. The average TGM concentrations in ambient air in a Au mill reached 18,000 ng m⁻³, which exceeds the maximum allowable occupational standard for TGM of 10,000 ng m⁻³ in China. Both total and methyl-Hg concentrations in stream water, stream sediment, and soil samples collected in the Tongguan area were elevated compared to methyl-Hg reported in artisanal Au mining areas in Suriname and the Amazon River basin. Total Hg concentrations in vegetable and wheat samples ranged from 42 to 640 μg kg⁻¹, all of which significantly exceed the Chinese guidance limit for vegetables (10 μg kg⁻¹) and foodstuffs other than fish (20 μg kg⁻¹). Fortunately, methyl-Hg was not significantly accumulated in the crops sampled in this study, where concentrations varied from 0.2 to 7.7 μg kg⁻¹.     

The Diavik waste rock project: Initial geochemical response from a low sulfide waste rock pile

Three large-scale experimental waste rock piles (test piles) were constructed and instrumented at the Diavik Diamond Mine in the Northwest Territories, Canada, as part of an integrated field and laboratory study to measure and compare physical and geochemical characteristics of experimental, low sulfide waste rock piles at various scales. This paper describes the geochemical response during the first season from a test pile containing 0.053 wt.% S. Bulk drainage chemistry was measured at two sampling points for pH, Eh, alkalinity, dissolved cations and anions, and nutrients. The geochemical equilibrium model MINTEQA2 was used to interpret potential mineral solubility controls on water chemistry. The geochemical response characterizes the initial flushing response of blasting residues and oxidation products derived from sulfides in waste rock exposed to the atmosphere for less than 1 year. Sulfate concentrations reached 2000 mg L⁻¹ when ambient temperatures were >10 °C, and decreased as ambient temperatures declined to <0 °C. The pH decreased to <5, concomitant with an alkalinity minimum of <1 mg L⁻¹ (as total CaCO₃), suggesting all available alkalinity is consumed by acid-neutralizing reactions. Concentrations of Al and Fe were <0.36 and <0.11 mg L⁻¹, respectively. Trends of pH and alkalinity and the calculated saturation indices for Al and Fe (oxy)hydroxides suggest that dissolution of Al and Fe (oxy)hydroxide phases buffers the pH. The effluent water showed increased concentrations of dissolved Mn (<13 mg L⁻¹), Ni (<7.0 mg L⁻¹), Co (<1.5 mg L⁻¹), Zn (<0.5 mg L⁻¹), Cd (<0.008 mg L⁻¹) and Cu (<0.05 mg L⁻¹) as ambient temperatures increased. Manganese is released by aluminosilicate weathering, Ni and Co by pyrrhotite [Fe_1−xS] oxidation, Zn and Cd by sphalerite oxidation, and Cu by chalcopyrite [CuFeS₂] oxidation. No dissolved metals appear to have discrete secondary mineral controls. Changes in SO₄, pH and metal concentrations indicate sulfide oxidation is occurring and effluent concentrations are influenced by ambient temperatures and, possibly, increasing flow path lengths that transport reaction products from previously unflushed waste rock.     

Laboratory study of calcite–gypsum sludge–water interactions in a flooded tailings impoundment at the Kristineberg Zn–Cu mine,northern Sweden

Due to liming of acid mine drainage, a calcite–gypsum sludge with high concentrations of Zn (24,400 ± 6900 μg g⁻¹), Cu (2840 ± 680 μg g⁻¹) and Cd (59 ± 20 μg g⁻¹) has formed in a flooded tailings impoundment at the Kristineberg mine site. The potential metal release from the sludge during resuspension events and in a long-term perspective was investigated by performing a shake flask test and sequential extraction of the sludge. The sequentially extracted carbonate and oxide fractions together contained ⩾97% of the total amount of Cd, Co, Cu, Ni, Pb and Zn in the sludge. The association of these metals with carbonates and oxides appears to result from sorption and/or coprecipitation reactions at the surfaces of calcite and Fe, Al and Mn oxyhydroxides forming in the impoundment. If stream water is diverted into the flooded impoundment, dissolution of calcite, gypsum and presumably also Al oxyhydroxides can be expected during resuspension events. In the shake flask test (performed at a pH of 7–9), remobilisation of Zn, Cu, Cd and Co from the sludge resulted in dissolved concentrations of these metals that were significantly lower than those predicted to result from dissolution of the carbonate fraction of the sludge. This may suggest that cationic Zn, Cu, Cd and Co remobilised from dissolving calcite, gypsum and Al oxyhydroxides were readsorbed onto Fe oxyhydroxides remaining stable under oxic conditions. In a long-term perspective (≳10² a), ⩾97% of the Cd, Co, Cu, Ni, Pb and Zn content of the sludge potentially is available for release by dissolution of calcite and reductive dissolution of Fe oxyhydroxides if the sludge is subject to a soil environment with lower dissolved Ca concentrations, pH and redox than in the impoundment.     

Arsenic accumulation in the roots of Helianthus annuus and Zea mays by irrigation with arsenic-rich groundwater: Insights from synchrotron X-ray fluorescence imaging

The aim of this study was to investigate the accumulation of arsenic (As) in and on roots of Zea mays (maize) and Helianthus annuus (sunflower) by means of synchrotron-based micro-focused X-ray fluorescence imaging (μ-XRF). Plant and soil samples were collected from two field sites in the Hetao Plain (Inner Mongolia, China) which have been regularly irrigated with As-rich groundwater. Detailed μ-XRF element distribution maps were generated at the Fluo-beamline of the Anka synchrotron facility (Karlsruhe Institute of Technology) to assess the spatial distribution of As in thin sections of plant roots and soil particles. The results showed that average As concentrations in the roots (14.5–27.4 mg kg⁻¹) covered a similar range as in the surrounding soil, but local maximum root As concentrations reached up to 424 mg kg⁻¹ (H. annuus) and 1280 mg kg⁻¹ (Z. mays), respectively. Importantly, the results revealed that As had mainly accumulated at the outer rhizodermis along with iron (Fe). We therefore conclude that thin crusts of Fe-(hydr)oxides cover the roots and act as an effective barrier to As, similar to the formation of Fe plaque in rice roots. In contrast to permanently flooded rice paddy fields, regular flood irrigation results in variable redox conditions within the silty and loamy soils at our study site and fosters the formation of Fe-(hydr)oxide plaque on the root surfaces.     

High cadmium concentration in soil in the Three Gorges region: Geogenic source and potential bioavailability

This study investigated the distribution and sources of Cd in soils from a Cd-rich area in the Three Gorges region, China. The results showed that in the study area arable soils contain 0.42–42 mg kg⁻¹ Cd with 0.12–8.5 mg kg⁻¹ in the natural soils, corresponding to high amounts of Cd (0.22–42 mg kg⁻¹) in outcropping sedimentary rocks in the area. Both lognormal distribution and enrichment factor (EF) plots were applied in an attempt to distinguish between geogenic and anthropogenic origins of Cd in the local soils. The lognormal distribution plots illustrated that geogenic sources dominated in soils with low and moderate Cd concentrations (<8.5 mg kg⁻¹), whereas anthropogenic sources (agricultural activities, coal mining) significantly elevated Cd contents in some arable soils (>8.5 mg kg⁻¹). The enrichment factor plots illustrated that the majority of the soil samples had EF values of <5, pointing to a geogenic origin of Cd in the soils, whereas some arable soils had EF values >5, pointing to an additional anthropogenic input of Cd to the soils. Sequential extraction results showed that Cd soluble in water and weak acid (water-soluble, exchangeable and carbonate fraction of the soil) accounts for an average of 31% of the total soil Cd, which indicates high potential for Cd mobility and bioavailability. The findings point to a potential health risk from Cd in areas with high geogenic background concentrations of this metal.     

Assessment of trace metal and rare earth elements contamination in rivers around abandoned and active mine areas. The case of Lubumbashi River and Tshamilemba Canal,Katanga, Democratic Republic of the Congo

Active and abandoned mine activities constitute the sources of deterioration of water and soil quality in many parts of the world, particularly in the African Copperbelt regions. The accumulation in soils and the release of toxic substances into the aquatic ecosystem can lead to water resources pollution and may place aquatic organisms and human health at risk. In this study, the impact of past mining activity (i.e., abandoned mine) on aquatic ecosystems has been studied using ICP-MS analysis for trace metals and Rare Earth Elements (REE) in sediment samples from Lubumbashi River (RL) and Tshamilemba Canal (CT), Katanga, Democratic Republic of the Congo (DRC). Soil samples from surrounding CT were collected to evaluate trace metal and REE concentrations and their spatial distribution. The extent of trace metal contamination compared to the background area was assessed by Enrichment Factor (EF) and Geoaccumulation Index (I_geo). Additionally, the trace metal concentrations probable effect levels (PELs) for their potential environmental impact was achieved by comparing the trace metal concentrations in the sediment/soil samples with the Sediment Quality Guidelines (SQGs). Spearman's Rank-order correlation was used to identify the source and origin of contaminants. The results highlighted high concentrations of trace metals in surface sediments of CT reaching the values of 40152, 15586, 610, 10322, 60704 and 15152 mg kg⁻¹ for Cu, Co, Zn, Pb, Fe and Mn, respectively. In the RL, the concentrations reached the values of 24093, 2046, 5463, 3340, 68290 and 769 mg kg⁻¹ for Cu, Co, Zn, Pb, Fe and Mn, respectively. The ΣREE varied from 66 to 218 and 142–331 mg kg⁻¹ for CT and RL, respectively. The soil samples are characterized by variable levels of trace metals. The EF analysis showed “extremely severe enrichment” for Cu and Co. However, no enrichment was observed for REE. Except for Mo, Th, U, Eu, Mo, Ho and Tm for which Igeo is classified as “moderately polluted and/or unpolluted”, all elements in different sites are classified in the class 6, “extremely polluted”. The trace metal concentrations in all sampling sites largely exceeded the SQGs and the PELs for the Protection of Aquatic Life recommendation. Cu and Co had positive correlation coefficient values (r = 0.741, P < 0.05, n = 14). This research presents useful tools for the evaluation of water contamination in abandoned and active mining areas.     

Organic carbon concentrations and transport in small mountain rivers,Panama

Tropical small mountainous rivers (SMRs) are increasingly recognized for their role in the global export of dissolved organic carbon (DOC) to the oceans. Here we utilize the Isthmus of Panama as an ideal place to provide first-order estimates of DOC yields across a wide assemblage of bedrock lithologies and land cover practices. Samples for dissolved organic carbon (DOC) analysis were collected across Panama along an E–W transect from the central Panama area to the Costa Rican border for 24 mainstem rivers, 3 large tributary rivers, and one headwater stream. Sampling occurred during both the wet and the dry seasons. DOC concentrations during the wet season are higher than during the dry season in all but three of the rivers. Concentrations vary greatly from river to river and from season to season, with values as low as 0.64 mg l⁻¹ to greater than >25 mg l⁻¹ with the highest concentrations observed for the rivers draining Tertiary marine sedimentary rocks in the Burica and Azuero peninsulas. DOC yields from Panamanian rivers (2.29–7.97 tons/km²/y) are similar to or slightly lower than those determined for other tropical SMR systems. Areas underlain by Tertiary aged sediments exhibited significantly higher mean DOC yields compared to their igneous counterparts, despite maintaining substantially lower aboveground carbon densities, suggesting the important influence of lithology. Finally, regression analyses between DOC yields and select watershed parameters revealed a negative and statistically significant relationship with maximum and mean gradient suggesting lower soil retention times may be linked to lower DOC yields.     

Cement–fly ash stabilisation/solidification of contaminated soil: Performance properties and initiation of operating envelopes

This study was aimed at evaluating the mechanical and pH-dependent leaching performance of a mixed contaminated soil treated with a mixture of Portland cement (CEMI) and pulverised fuel ash (PFA). It also sought to develop operating envelopes, which define the range(s) of operating variables that result in acceptable performance. A real site soil with low contaminant concentrations, spiked with 3000 mg/kg each of Cd, Cu, Pb, Ni and Zn, and 10,000 mg/kg of diesel, was treated with one part CEMI and four parts PFA (CEMI:PFA = 1:4) using different binder and water contents. The performance was assessed over time using unconfined compressive strength (UCS), hydraulic conductivity, acid neutralisation capacity (ANC) and pH-dependent leachability of contaminants. With binder dosages ranging from 5% to 20% and water contents ranging from 14% to 21% dry weight, the 28-day UCS was up to 500 kPa and hydraulic conductivity was around 10⁻⁸ m/s. With leachant pH extremes of 7.2 and 0.85, leachability of the contaminants was in the range: 0.02–3500 mg/kg for Cd, 0.35–1550 mg/kg for Cu, 0.03–92 mg/kg for Pb, 0.01–3300 mg/kg for Ni, 0.02–4010 mg/kg for Zn, and 7–4884 mg/kg for total petroleum hydrocarbons (TPHs), over time. Design charts were produced from the results of the study, which show the water and/or binder proportions that could be used to achieve relevant performance criteria. The charts would be useful for the scale-up and design of stabilisation/solidification (S/S) treatment of similar soil types impacted with the same types of contaminants.     

Mercury in water and biomass of microbial communities in hot springs of Yellowstone National Park,USA

Ultra-clean sampling methods and approaches typically used in pristine environments were applied to quantify concentrations of Hg species in water and microbial biomass from hot springs of Yellowstone National Park, features that are geologically enriched with Hg. Microbial populations of chemically-diverse hot springs were also characterized using modern methods in molecular biology as the initial step toward ongoing work linking Hg speciation with microbial processes. Molecular methods (amplification of environmental DNA using 16S rDNA primers, cloning, denatured gradient gel electrophoresis (DGGE) screening of clone libraries, and sequencing of representative clones) were used to examine the dominant members of microbial communities in hot springs. Total Hg (THg), monomethylated Hg (MeHg), pH, temperature, and other parameters influential to Hg speciation and microbial ecology are reported for hot springs water and associated microbial mats.Several hot springs indicate the presence of MeHg in microbial mats with concentrations ranging from 1 to 10 ng g⁻¹ (dry weight). Concentrations of THg in mats ranged from 4.9 to 120,000 ng g⁻¹ (dry weight). Combined data from surveys of geothermal water, lakes, and streams show that aqueous THg concentrations range from l to 600 ng L⁻¹. Species and concentrations of THg in mats and water vary significantly between hot springs, as do the microorganisms found at each site.     

Concentration of metals in surface water and sediment of Luilu and Musonoie Rivers,Kolwezi-Katanga,Democratic Republic of Congo

The pollution and deterioration of most important vital rivers in the Katanga region, Democratic Republic of Congo (DRC) are mainly due to the discharge of untreated industrial effluents as well as to the mining and artisanal mineral exploitation activities. In this study, the concentrations of metals (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Mo, Ag, Sn, and Pb) and major elements (Na, Mg, and K) in mining effluents, water and sediment samples of two main rivers of the district of Kolwezi (Katanga, DRC) were subjected to analysis by Inductive Coupled Plasma-Mass Spectroscopy (ICP-MS). The results showed that, in general, the metal concentrations in the sampling sites from the mining effluent and river waters exceed largely the World Health Organization and the Aquatic Quality Guidelines for the Protection of Aquatic Life recommendation limits. The highest metal concentrations in water and sediment samples were detected surrounding the mining effluents discharge. In the surface sediments of Luilu River, the values of 47,468 and 13,199 mg kg⁻¹ were observed for Cu and Co, respectively. For the sediment samples from Musonoie River, the maximum values of 370.8 and 240.6 mg kg⁻¹ for Cu and Co, respectively were observed. The results of this study suggest that the mining effluents being discharged into the rivers and the accumulation of pollutants in sediments might represent a source of toxicity for aquatic living organisms and could pose significant human health risks. The measures to establish a monitoring program and the application of wastewater treatment techniques to the mining effluents prior to discharge are recommended to reduce the load of contaminants into the receiving systems.     

Environmental assessment of abandoned mine tailings in Adak,Västerbotten district (northern Sweden)

Sulfide-rich mine tailings in Adak that are exposed to weathering cause acid mine drainage characterized by low pH (2–4) and high SO₄ (up to 800 mg L⁻¹). Surface water, sediment and soil samples collected in this study contain higher concentrations of As, Cu, Fe and Zn, compared to the target and/or intervention limits set by international regulatory agencies. In particular, high As concentrations in water (up to 2900 μg L⁻¹) and sediment (up to 900 mg kg⁻¹) are of concern. There is large variability in trace element concentrations, implying that both physical (grain size) and chemical factors (pH, secondary phases as sulfides, Al-oxides or clay minerals) play an important role in their distribution. The low pH keeps the trace elements dissolved, and they are transported farther downstream. Trace element partition coefficients are low (log K_d = 0.3–4.3), and saturation indices calculated with PHREEQC are <0 for common oxide and sulfidic minerals. The sediment and soil samples indicate an enhanced pollution index (up to 17), and high enrichment factors for trace elements (As up to 38,300; Zn up to 800). Finally, leaves collected from different plant types indicate bioaccumulation of several elements (As, Al, Cu, Fe and Zn). However, some of the plants growing in this area (e.g., Salix, Equisétum) are generally resistant to metal toxicity, and hence, liming and phytoremediation could be considered as potential on-site remediation methods.     

Chlor-alkali industrial contamination and riverine transport of mercury: Distribution and partitioning of mercury between water,suspended matter,and bottom sediment of the Thur River,France

Total dissolved and total particulate Hg mass balances were estimated during one hydrological period (July 2001–June 2002) in the Thur River basin, which is heavily polluted by chlor-alkali industrial activity. The seasonal variations of the Hg dynamics in the aquatic environment were assessed using total Hg concentrations in bottom sediment and suspended matter, and total and reactive dissolved Hg concentrations in the water. The impact of the chlor-alkali plant (CAP) remains the largest concern for Hg contamination of this river system. Upstream from the CAP, the Hg partitioning between dissolved and particulate phases was principally controlled by the dissolved fraction due to snow melting during spring high flow, while during low flow, Hg was primarily adsorbed onto particulates. Downstream from the CAP, the Hg partitioning is controlled by the concentration of dissolved organic and inorganic ligands and by the total suspended sediment (TSS) concentrations. Nevertheless, the particulate fluxes were five times higher than the dissolved ones. Most of the total annual flux of Hg supplied by the CAP to the river is transported to the outlet of the catchment (total Hg flux: 70 μg m⁻² a⁻¹). Downstream from the CAP, the bottom sediment, mainly composed of coarse sediment (>63 μm) and depleted in organic matter, has a weak capacity to trap Hg in the river channel and the stock of Hg is low (4 mg m⁻²) showing that the residence time of Hg in this river is short.     

Soil-geochemical factors controlling the distribution and oral bioaccessibility of nickel,vanadium and chromium in soil

Geogenic nickel (Ni), vanadium (V) and chromium (Cr) are present at elevated levels in soils in Northern Ireland. Whilst Ni, V and Cr total soil concentrations share common geological origins, their respective levels of oral bioaccessibility are influenced by different soil-geochemical factors. Oral bioaccessibility extractions were carried out on 145 soil samples overlying 9 different bedrock types to measure the bioaccessible portions of Ni, V and Cr. Principal component analysis identified two components (PC1 and PC2) accounting for 69% of variance across 13 variables from the Northern Ireland Tellus Survey geochemical data. PC1 was associated with underlying basalt bedrock, higher bioaccessible Cr concentrations and lower Ni bioaccessibility. PC2 was associated with regional variance in soil chemistry and hosted factors accounting for higher Ni and V bioaccessibility. Eight percent of total V was solubilised by gastric extraction on average across the study area. High median proportions of bioaccessible Ni were observed in soils overlying sedimentary rock types. Whilst Cr bioaccessible fractions were low (max = 5.4%), the highest measured bioaccessible Cr concentration reached 10.0 mg kg⁻¹, explained by factors linked to PC1 including high total Cr concentrations in soils overlying basalt bedrock.     

Release,transport and attenuation of metals from an old tailings impoundment

The oxidation of sulfide minerals from mine wastes results in the release of oxidation products to groundwater and surface water. The abandoned high-sulfide Camp tailings impoundment at Sherridon, Manitoba, wherein the tailings have undergone oxidation for more than 70 a, was investigated by hydrogeological, geochemical, and mineralogical techniques. Mineralogical analysis indicates that the unoxidized tailings contain nearly equal proportions of pyrite and pyrrhotite, which make up to 60 wt% of the total tailings, and which are accompanied by minor amounts of chalcopyrite and sphalerite, and minute amounts of galena and arsenopyrite. Extensive oxidation in the upper 50 cm of the tailings has resulted in extremely high concentrations of dissolved SO₄ and metals and As in the tailings pore water (pH < 1, 129,000 mg L⁻¹ Fe, 280,000 mg L⁻¹ SO₄, 55,000 mg L⁻¹ Zn, 7200 mg L⁻¹ Al, 1600 mg L⁻¹ Cu, 260 mg L⁻¹ Mn, 110 mg L⁻¹ Co, 97 mg L⁻¹ Cd, 40 mg L⁻¹ As, 15 mg L⁻¹ Ni, 8 mg L⁻¹ Pb, and 3 mg L⁻¹ Cr). The acid released from sulfide oxidation has been extensive enough to deplete carbonate minerals to 6 m depth and to partly deplete Al-silicate minerals to a 1 m depth. Below 1 m, sulfide oxidation has resulted in the formation of a continuous hardpan layer that is >1 m thick. Geochemical modeling and mineralogical analysis indicate that the hardpan layer consists of secondary melanterite, rozenite, gypsum, jarosite, and goethite. The minerals indicated mainly control the dissolved concentrations of SO₄, Fe, Ca and K. The highest concentrations of dissolved metals are observed directly above and within the massive hardpan layer. Near the water table at a depth of 4 m, most metals and SO₄ sharply decline in concentration. Although dissolved concentrations of metals and SO₄ decrease below the water table, these concentrations remain elevated throughout the tailings, with up to 60,600 mg L⁻¹ Fe and 91,600 mg L⁻¹ SO₄ observed in the deeper groundwater. During precipitation events, surface seeps develop along the flanks of the impoundment and discharge pore water with a geochemical composition that is similar to the composition of water directly above the hardpan. These results suggest that shallow lateral flow of water from a transient perched water table is resulting in higher contaminant loadings than would be predicted if it were assumed that discharge is derived solely from the deeper primary water table. The abundance of residual sulfide minerals, the depletion of aluminosilicate minerals in the upper meter of the tailings and the presence of a significant mass of residual sulfide minerals in this zone after 70 a of oxidation suggest that sulfide oxidation will continue to release acid, metals, and SO₄ to the environment for decades to centuries.