Classification comparisons between dual-pol, compact polarimetric and quad-pol SAR imagery

We present a study of the polarimetric information content of dual-pol imaging modes and dual-pol imaging extended by polarimetric scattering models. We compare Wishart classifications both among the partial polarimetric datasets and against the full quad-pol dataset. Our emphasis is the inter-comparisons between the classification results based on dual-pol modes, compact polarimetric modes and scattering model extensions of the compact polarimetric modes. We primarily consider novel dual-pol modes, e.g. transmitting a circular polarization and receiving horizontal and vertical polarizations, and the pseudo-quad-pol data derived from polarimetric scattering models based on dual-pol data. We show that the overall classification accuracy of the pseudo-quad-pol data is essential the same as the classification accuracy obtained directly employing the underlying dual-pol imagery.     

Crop characterization using an improved scattering power decomposition technique for compact polarimetric SAR data

Crop characterization using Compact-Pol Synthetic Aperture Radar (CP-SAR) data is of prime interest with the rapid advancements of SAR systems towards operational applications. It is noteworthy that as a good compromise between the dual and quad-polarized SAR systems, the CP-SAR offer advantages in terms of the larger swath and lower data rate. The m − χ CP decomposition considers two out of the three Stokes child parameters: degree of polarization (m), ellipticity (χ), and orientation angle (ψ) to describe the polarized part of the quasi-monochromatic partially polarized wave. An improvement in the scattering powers was proposed in the S − Ω decomposition, which takes into accounts both the transmitted and received wave ellipticities (χ_t, χ_r) and the orientation angles (ψ_t, ψ_r). In this decomposition, S denotes the Stokes vector and Ω is the polarized power fraction. However, it may be noted that the S − Ω decomposition intrinsically ignores dominance in the target scattering mechanism while calculating the powers. In this work, improvement is proposed for the S − Ω decomposition by utilizing the degree of dominance in the scattering mechanism. The improved S − Ω (named as iS − Ω) decomposition powers are first compared with the existing m − χ and S − Ω powers for elementary (viz., trihedral and dihedral corner reflectors) and distributed targets using simulated CP-SAR data from quad-pol RADARSAT-2 data. An increase of ∼2% for odd and even-bounce powers obtained from the iS − Ω decomposition is observed for the trihedral and dihedral corner reflectors respectively. The analysis of the scattering powers for distributed targets shows that an increase of 15% and 12% in the even and odd-bounce powers is observed from iS − Ω for urban and bare soil areas respectively as compared to the m − χ and S − Ω decompositions. Besides, temporal variations in the scattering powers obtained from the iS − Ω decomposition are also analyzed for rice, cotton, and sugarcane crops at different growth stages.     

Forecast of wheat yield throughout the agricultural season using optical and radar satellite images

The aim of this study is to estimate the capabilities of forecasting the yield of wheat using an artificial neural network combined with multi-temporal satellite data acquired at high spatial resolution throughout the agricultural season in the optical and/or microwave domains. Reflectance (acquired by Formosat-2, and Spot 4–5 in the green, red, and near infrared wavelength) and multi-configuration backscattering coefficients (acquired by TerraSAR-X and Radarsat-2 in the X- and C-bands, at co- (abbreviated HH and VV) and cross-polarization states (abbreviated HV and VH)) constitute the input variable of the artificial neural networks, which are trained and validated on the successively acquired images, providing yield forecast in near real-time conditions. The study is based on data collected over 32 fields of wheat distributed over a study area located in southwestern France, near Toulouse. Among the tested sensor configurations, several satellite data appear useful for the yield forecasting throughout the agricultural season (showing coefficient of determination (R²) larger than 0.60 and a root mean square error (RMSE) lower than 9.1 quintals by hectare (q ha⁻¹)): C_VH, C_HV, or the combined used of X_HH and C_HH, C_HH and C_HV, or green reflectance and C_HH. Nevertheless, the best accurate forecast (R² = 0.76 and RMSE = 7.0 q ha⁻¹) is obtained longtime before the harvest (on day 98, during the elongation of stems) using the combination of co- and cross-polarized backscattering coefficients acquired in the C-band (C_VV and C_VH). These results highlight the high interest of using synthetic aperture radar (SAR) data instead of optical ones to early forecast the yield before the harvest of wheat.     

Performance of Landsat TM in ship detection in turbid waters

The visible and near infrared bands of Landsat have limitations for detecting ships in turbid water. The potential of TM middle infrared bands for ship detection has so far not been investigated. This study analyzed the performance of the six Landsat TM visible and infrared bands for detecting dredging ships in the turbid waters of the Poyang Lake, China. A colour composite of principal components analysis (PCA) components 3, 2 and 1 of a TM image was used to randomly select 81 dredging ships. The reflectance contrast between ships and adjacent water was calculated for each ship. A z-score and related p-value were used to assess the ship detection performance of the six Landsat TM bands. The reflectance contrast was related to water turbidity to analyze how water turbidity affected the capability of ship identification. The results revealed that the TM middle infrared bands 5 and 7 better discriminated vessels from surrounding waters than the visible and near infrared bands 1–4. A significant relation between reflectance contrast and water turbidity in bands 1–4 could explain the limitations of bands 1–4; while water turbidity has no a significant relation to the reflectance contrast of bands 5 and 7. This explains why bands 5 and 7 detect ships better than bands 1–4.     

Carrier phase multipath error characterization and reduction in single aircraft relative positioning

This paper describes GPS carrier phase (CP) multipath characterization and error reduction techniques and their application in single aircraft relative positioning. In particular, the single aircraft relative positioning scenario has applications for high-accuracy multi-sensor stabilization where CP multipath is a major error source that limits system performance. We will briefly review the requisite multipath theory and discuss models for quantifying the error characteristics. Field-test data will be used to validate the multipath models considering the underlying assumptions. A basic geometric reflection point theory will be presented to demonstrate the physical environmental sensitivity of CP multipath to parameters such as surface flatness and antenna height. Several different quantities will be described as multipath indicators for time-domain detection and will be compared with a frequency-domain technique. A new multipath detection approach will be introduced that is suitable to track multipath from time-varying reflection/diffraction points. Finally, the narrow-lane antenna baseline processing technique will be presented as a real-time approach to mitigate CP noise and multipath errors that is well suited for a very short baseline single aircraft high accuracy relative positioning system. Field-test results and analysis will be used to illustrate the key concepts in this paper and to help characterize the total navigation system performance.     

简缩极化特征值分析的溢油检测

为有效利用简缩极化SAR进行海洋溢油检测,本文基于简缩极化特征值分析,提出了3个用于简缩极化溢油检测的参数,引入了基于简缩极化特征值分解的简缩极化熵Hc(Compact Polarization Entropy)、简缩极化比参数PFc(Compact Polarization Fraction)、简缩极化基准高度PHc(Compact Polarization Pedestal Height)特征进行海洋溢油检测。海表的散射类型主要为低熵散射(小粗糙面发生的Bragg散射),为弱去极化、弱散射过程随机性状态,由于溢油会阻尼海水的Bragg散射,使其熵值变高、呈去极化、强散射过程随机性状态,故简缩极化熵、简缩极化比参数和简缩极化基准高度可以用来检测海洋溢油。本文采用C波段的Radarsat-2、SIR-C/X-SAR数据进行了实验,结果表明:简缩极化熵、简缩极化比参数和简缩极化基准高度能够有效抑制疑似溢油,使海水与疑似溢油差异变小;突出溢油区域,使海水与溢油的可区分性变大。     

Quantifying winter wheat residue biomass with a spectral angle index derived from China Environmental Satellite data

Quantification of crop residue biomass on cultivated lands is essential for studies of carbon cycling of agroecosystems, soil-atmospheric carbon exchange and Earth systems modeling. Previous studies focus on estimating crop residue cover (CRC) while limited research exists on quantifying crop residue biomass. This study takes advantage of the high temporal resolution of the China Environmental Satellite (HJ-1) data and utilizes the band configuration features of HJ-1B data to establish spectral angle indices to estimate crop residue biomass. Angles formed at the NIR_IRS vertex by the three vertices at R, NIR_IRS, and SWIR (ANIR_IRS) of HJ-1B can effectively indicate winter wheat residue biomass. A coefficient of determination (R²) of 0.811 was obtained between measured winter wheat residue biomass and ANIR_IRS derived from simulated HJ-1B reflectance data. The ability of ANIR_IRS for quantifying winter wheat residue biomass using HJ-1B satellite data was also validated and evaluated. Results indicate that ANIR_IRS performed well in estimating winter wheat residue biomass with different residue treatments; the root mean square error (RMSE) between measured and estimated residue biomass was 0.038 kg/m². ANIR_IRS is a potential method for quantifying winter wheat residue biomass at a large scale due to wide swath width (350 km) and four-day revisit rate of the HJ-1 satellite. While ANIR_IRS can adequately estimate winter wheat residue biomass at different residue moisture conditions, the feasibility of ANIR_IRS for winter wheat residue biomass estimation at different fractional coverage of green vegetation and different environmental conditions (soil type, soil moisture content, and crop residue type) needs to be further explored.     

Is it possible to discern Striga weed (Striga hermonthica) infestation levels in maize agro-ecological systems using in-situ spectroscopy?

The invasion by Striga in most cereal crop fields in Africa has posed a significant threat to food security and has caused substantial socioeconomic losses. Hyperspectral remote sensing is an effective means to discriminate plant species, providing possibilities to track such weed invasions and improve precision agriculture. However, essential baseline information using remotely sensed data is missing, specifically for the Striga weed in Africa. In this study, we investigated the spectral uniqueness of Striga compared to other co-occurring maize crops and weeds. We used the in-situ FieldSpec® Handheld 2™ analytical spectral device (ASD), hyperspectral data and their respective narrow-band indices in the visible and near infrared (VNIR) region of the electromagnetic spectrum (EMS) and four machine learning discriminant algorithms (i.e. random forest: RF, linear discriminant analysis: LDA, gradient boosting: GB and support vector machines: SVM) to discriminate among different levels of Striga (Striga hermonthica) infestations in maize fields in western Kenya. We also tested the utility of Sentinel-2 waveband configurations to map and discriminate Striga infestation in heterogenous cereal crop fields. The in-situ hyperspectral reflectance data were resampled to the spectral waveband configurations of Sentinel-2 using published spectral response functions. We sampled and detected seven Striga infestation classes based on three flowering Striga classes (low, moderate and high) against two background endmembers (soil and a mixture of maize and other co-occurring weeds). A guided regularized random forest (GRRF) algorithm was used to select the most relevant hyperspectral wavebands and vegetation indices (VIs) as well as for the resampled Sentinel-2 multispectral wavebands for Striga infestation discrimination. The performance of the four discriminant algorithms was compared using classification accuracy assessment metrics. We were able to positively discriminate Striga from the two background endmembers i.e. soil and co-occurring vegetation (maize and co-occurring weeds) based on the few GRRF selected hyperspectral vegetation indices and the GRRF selected resampled Sentinel-2 multispectral bands. RF outperformed all the other discriminant methods and produced the highest overall accuracy of 91% and 85%, using the hyperspectral and resampled Sentinel-2 multispectral wavebands, respectively, across the four different discriminant models tested in this study. The class with the highest detection accuracy across all the four discriminant algorithms, was the “exclusively maize and other co-occurring weeds” (>70%). The GRRF reduced the dimensionality of the hyperspectral data and selected only 9 most relevant wavebands out of 750 wavebands, 6 VIs out of 15 and 6 out of 10 resampled Sentinel-2 multispectral wavebands for discriminating among the Striga and co-occurring classes. Resampled Sentinel-2 multispectral wavebands 3 (green) and 4 (red) were the most crucial for Striga detection. The use of the most relevant hyperspectral features (i.e. wavebands and VIs) significantly (p ≤ 0.05) increased the overall classification accuracy and Kappa scores (±5% and ±0.2, respectively) in all the machine learning discriminant models. Our results show the potential of hyperspectral, resampled Sentinel-2 multispectral datasets and machine learning discriminant algorithms as a tool to accurately discern Striga in heterogenous maize agro-ecological systems.     

An assessment of independent component analysis for detection of military targets from hyperspectral images

Hyperspectral data acquired over hundreds of narrow contiguous wavelength bands are extremely suitable for target detection due to their high spectral resolution. Though spectral response of every material is expected to be unique, but in practice, it exhibits variations, which is known as spectral variability. Most target detection algorithms depend on spectral modelling using a priori available target spectra In practice, target spectra is, however, seldom available a priori. Independent component analysis (ICA) is a new evolving technique that aims at finding out components which are statistically independent or as independent as possible. The technique therefore has the potential of being used for target detection applications. A assessment of target detection from hyperspectral images using ICA and other algorithms based on spectral modelling may be of immense interest, since ICA does not require a priori target information. The aim of this paper is, thus, to assess the potential of ICA based algorithm vis a vis other prevailing algorithms for military target detection. Four spectral matching algorithms namely Orthogonal Subspace Projection (OSP), Constrained Energy Minimisation (CEM), Spectral Angle Mapper (SAM) and Spectral Correlation Mapper (SCM), and four anomaly detection algorithms namely OSP anomaly detector (OSPAD), Reed–Xiaoli anomaly detector (RXD), Uniform Target Detector (UTD) and a combination of Reed–Xiaoli anomaly detector and Uniform Target Detector (RXD–UTD) were considered. The experiments were conducted using a set of synthetic and AVIRIS hyperspectral images containing aircrafts as military targets. A comparison of true positive and false positive rates of target detections obtained from ICA and other algorithms plotted on a receiver operating curves (ROC) space indicates the superior performance of the ICA over other algorithms.     

Sigseg: a tool for the detection of position and velocity discontinuities in geodetic time-series

The detection of discontinuities in geodetic data is an ever more important topic due to both the influence of discontinuities on the results of models and analyses, and to the very meaning of discontinuities in physical phenomena. We consider and describe a mathematical model, originally formulated for the approximation of images by smooth functions, in one dimension (1D). The model had been designed to smooth the data while preserving and detecting its discontinuities following a variational approach. A second and more complex model for the approximation of images by functions with smooth first derivatives is also available. This second model had been designed to smooth the data while preserving and detecting the discontinuities of the data, but also those of the first derivative. Such interesting features suggest the chance to apply this second model to 1D geodetic data, in particular for the detection of discontinuities and velocity changes in position time-series rather than for signal smoothing. The sigseg (signal segmentation) program implements the two variational models in 1D and is presented with applications to geodetic data. The essential mathematical elements are sketched, and some details on the numerical implementation are given.     

Sub-footprint analysis to uncover tree height variation using ICESat/GLAS

Detailed forest height data are an indispensable prerequisite for many forestry and earth science applications. Existing research of using Geoscience Laser Altimeter System (GLAS) data mainly focuses on deriving average or maximum tree heights within a GLAS footprint, i.e. an ellipse with a diameter of 65 m. However, in most forests, it is likely that the tree heights within such ellipse are heterogeneous. Therefore, it is desired to uncover detailed tree height variation within a GLAS footprint. To the best of our knowledge, no such methods have been reported as of now. In this study, we aim to characterize tree heights’ variation within a GLAS footprint as different layers, each of which corresponds to trees with similar heights. As such, we developed a new method that embraces two steps: first, a refined Levenberg–Marquardt (LM) algorithm is proposed to decompose raw GLAS waveform into multiple Gaussian signals, within which it is hypothesized that each vegetation signal corresponds to a particular tree height layer. Second, for each layer, three parameters were first defined: Canopy Top Height (CTH), Crown Length (CL), and Cover Proportion (CP). Then we extracted the three parameters from each Gaussian signal through a defined model. In order to test our developed method, we set up a study site in Ejina, China where the dominant specie is Populus euphratica. Both simulated and field tree height data were adopted. With regard to the simulation data, results presented a very high agreement for the three predefined parameters between our results and simulation data. When our methods were applied to the field data, the respective R² become 0.78 (CTH), CL (R² = 0.76), CP (R² = 0.74). Overall, our studies revealed that large footprint GLAS waveform data have the potentials for obtaining detailed forest height variation.     

Gaussian processes uncertainty estimates in experimental Sentinel-2 LAI and leaf chlorophyll content retrieval

ESA’s upcoming Sentinel-2 (S2) Multispectral Instrument (MSI) foresees to provide continuity to land monitoring services by relying on optical payload with visible, near infrared and shortwave infrared sensors with high spectral, spatial and temporal resolution. This unprecedented data availability leads to an urgent need for developing robust and accurate retrieval methods, which ideally should provide uncertainty intervals for the predictions. Statistical learning regression algorithms are powerful candidats for the estimation of biophysical parameters from satellite reflectance measurements because of their ability to perform adaptive, nonlinear data fitting. In this paper, we focus on a new emerging technique in the field of Bayesian nonparametric modeling. We exploit Gaussian process regression (GPR) for retrieval, which is an accurate method that also provides uncertainty intervals along with the mean estimates. This distinct feature is not shared by other machine learning approaches. In view of implementing the regressor into operational monitoring applications, here the portability of locally trained GPR models was evaluated. Experimental data came from the ESA-led field campaign SPARC (Barrax, Spain). For various simulated S2 configurations (S2-10m, S2-20m and S2-60m) two important biophysical parameters were estimated: leaf chlorophyll content (LCC) and leaf area index (LAI). Local evaluation of an extended training dataset with more variation over bare soil sites led to improved LCC and LAI mapping with reduced uncertainties. GPR reached the 10% precision required by end users, with for LCC a NRMSE of 3.5–9.2% (r²: 0.95–0.99) and for LAI a NRMSE of 6.5–7.3% (r²: 0.95–0.96). The developed GPR models were subsequently applied to simulated Sentinel images over various sites. The associated uncertainty maps proved to be a good indicator for evaluating the robustness of the retrieval performance. The generally low uncertainty intervals over vegetated surfaces suggest that the locally trained GPR models are portable to other sites and conditions.     

一种改进人类视觉的SAR图像舰船检测方法

针对以离散余弦变换为核心的人类视觉模型舰船检测算法受数据类型限制的问题(即对复数类型的数据检测效果不好),该文提出了一种改进的人类视觉模型SAR图像舰船检测算法。该算法是以快速傅里叶变换代替离散余弦变换,将SAR图像从空间域变换到频率域;快速傅里叶变换对数据类型要求较低,只要求数据是离散的,并且运行效率更高。然后,采用3种星载SAR数据——ENVISAT ASAR(25m)、Sentinel-1(10m)和Cosmo-Skymed(2.5m)进行对比实验。结果表明,以快速傅里叶变换为核心的人类视觉模型舰船检测算法的检测性能和效率优于以离散余弦变换为核心的算法、双参数恒虚警率(CFAR)算法和K分布恒虚警率算法。     

多波段高分辨率星载合成孔径雷达成像处理方法研究

星载合成孔径雷达（SAR）是一种工作在微波波段的主动式遥感器,它综合运用合成孔径技术、脉冲压缩技术和数据处理技术,采用较短的天线就能够获得方位和距离两个方向的高分辨率雷达图像。研制星载SAR系统的目的是获得具有一定测绘带宽和一定分辨率的地面目标图像,传统SAR模式不能同时满足高分辨率及较宽测绘带的要求。本文主要研究了多...     

基于引力场增强的SAR图像舰船检测方法研究

船只检测是实现船只航行安全的重要措施之一,利用SAR图像可实现船只检测。然而,传统的一些方法一般容易受到SAR图像斑噪的影响,在检测结果中产生大量的虚警。为解决这一问题,本文提出了一种基于引力场增强的舰船检测方法。该方法利用像素与其邻域内像素的相互作用可对目标像素增强的效应,有效地抑制了斑噪像素和背景像素的强度,凸显了目标。由于增强后的像素已经不满足对海面区域的均质性假设,因此直接使用恒虚警检测算法对图像进行全局检测并不能够得到很好的效果,据此本文引入了一个基于均质区域自适应分割的改进的K-CFAR检测算法,将图像分割为不同大小的一系列均质区域,并分别对各个均质区域使用一个改进的K-CFAR检测器对船只目标进行检测。最后,使用Radarsat-1数据和Envisat ASAR数据对本文算法进行了验证。实验表明,本文提出的方法能够有效地凸显弱目标,增加检测准确性,降低检测的虚警概率。     

Improved precise point positioning in the presence of ionospheric scintillation

Ionospheric disturbances can be detrimental to accuracy and reliability of GNSS positioning. We focus on how ionospheric scintillation induces significant degradation to Precise Point Positioning (PPP) and how to improve the performance of PPP during ionospheric scintillation periods. We briefly describe these problems and give the physical explanation of highly correlated phenomenon of degraded PPP estimates and occurrence of ionospheric scintillation. Three possible reasons can contribute to significant accuracy degradation in the presence of ionospheric scintillation: (a) unexpected loss of lock of tracked satellites which greatly reduces the available observations and considerably weakens the geometry, (b) abnormal blunders which are not properly mitigated by positioning programs, and (c) failure of cycle slip detection algorithms due to the high rate of total electronic content. The latter two reasons are confirmed as the major causes of sudden accuracy degradation by means of a comparative analysis. To reduce their adverse effect on positioning, an improved approach based on a robust iterative Kalman filter is adopted to enhance the PPP performance. Before the data enter the filter, the differential code biases are used for GNSS data quality checking. Any satellite whose C1–P1 and P1–P2 biases exceed 10 and 30 m, respectively, will be rejected. Both the Melbourne–Wubbena and geometry-free combination are used for cycle slip detection. But the thresholds are set more flexibly when ionospheric conditions become unusual. With these steps, most of the outliers and cycle slips can be effectively detected, and a first PPP estimation can be carried out. Furthermore, an iterative PPP estimator is utilized to mitigate the remaining gross errors and cycle slips which will be reflected in the posterior residuals. Further validation tests based on extensive experiments confirm our physical explanation and the new approach. The results show that the improved approach effectively avoids a large number of ambiguity resets which would otherwise be necessary. It reduces the number of re-parameterized phase ambiguities by approximately half, without scarifying the accuracy and reliability of the PPP solution.     

NLOS GPS signal detection using a dual-polarisation antenna

The reception of indirect signals, either in the form of non-line-of-sight (NLOS) reception or multipath interference, is a major cause of GNSS position errors in urban environments. We explore the potential of using dual-polarisation antenna technology for detecting and mitigating the reception of NLOS signals and severe multipath interference. The new technique computes the value of the carrier-power-to-noise-density (C/N ₀) measurements from left-hand circular polarised outputs subtracted from the right-hand circular polarised C/N ₀ counterpart. If this quality is negative, NLOS signal reception is assumed. If the C/N ₀ difference is positive, but falls below a threshold based on its lower bound in an open-sky environment, severe multipath interference is assumed. Results from two experiments are presented. Open-field testing was first performed to characterise the antenna behaviour and determine a suitable multipath detection threshold. The techniques were then tested in a dense urban area. Using the new method, two signals in the urban data were identified as NLOS-only reception during the occupation period at one station, while the majority of the remaining signals present were subject to a mixture of NLOS reception and severe multipath interference. The point positioning results were dramatically improved by excluding the detected NLOS measurements. The new technique is suited to a wide range of static ground applications based on our results.     

Detecting understory plant invasion in urban forests using LiDAR

Light detection and ranging (LiDAR) data are increasingly used to measure structural characteristics of urban forests but are rarely used to detect the growing problem of exotic understory plant invaders. We explored the merits of using LiDAR-derived metrics alone and through integration with spectral data to detect the spatial distribution of the exotic understory plant Ligustrum sinense, a rapidly spreading invader in the urbanizing region of Charlotte, North Carolina, USA. We analyzed regional-scale L. sinense occurrence data collected over the course of three years with LiDAR-derived metrics of forest structure that were categorized into the following groups: overstory, understory, topography, and overall vegetation characteristics, and IKONOS spectral features – optical. Using random forest (RF) and logistic regression (LR) classifiers, we assessed the relative contributions of LiDAR and IKONOS derived variables to the detection of L. sinense. We compared the top performing models developed for a smaller, nested experimental extent using RF and LR classifiers, and used the best overall model to produce a predictive map of the spatial distribution of L. sinense across our country-wide study extent. RF classification of LiDAR-derived topography metrics produced the highest mapping accuracy estimates, outperforming IKONOS data by 17.5% and the integration of LiDAR and IKONOS data by 5.3%. The top performing model from the RF classifier produced the highest kappa of 64.8%, improving on the parsimonious LR model kappa by 31.1% with a moderate gain of 6.2% over the county extent model. Our results demonstrate the superiority of LiDAR-derived metrics over spectral data and fusion of LiDAR and spectral data for accurately mapping the spatial distribution of the forest understory invader L. sinense.     

引入PLSA模型的光学遥感图像舰船检测

提出一种基于概率潜在语义分析(Probabilistic Latent Semantic Analysis,PLSA)的检测算法,首先通过PLSA将目标表述为潜在成分的概率组合,然后利用统计模式识别方法对获取的潜在成分概率进行判别,从而完成最终的检测。其中,生成的潜在成分反映了目标与特征之间相互出现的频率关系,并以潜在成分在目标中概率差异的形式对上述不对应现象给出了直观描述。实验结果表明,所提出的算法对多种复杂情况下的光学图像舰船检测具有很好的准确性和鲁棒性。     

Evaluation of polarimetric capabilities of dual polarized Sentinel-1 and TerraSAR-X data to improve the PSInSAR algorithm using amplitude dispersion index optimization

Polarimetric data is an additional source of information in PSI technique to improve its performance in land subsidence estimation. The combination of polarimetric data and radar interferometry can lead to an increase in coherence and the number of PS pixels. In this paper, we evaluated and compared the dual polarized Sentinel-1A (S1A) and TerraSAR-X (TSX) data to improve the PSInSAR algorithm. The improvement of this research is based on minimizing Amplitude Dispersion Index (ADI) by finding the optimum scattering mechanism to increase the number of PSC and PS pixels. The proposed method was tested using a dataset of 40 dual-pol SAR data (VV/VH) acquired by S1A and 20 dual-pol SAR data (HH/VV) acquired by TSX. The results revealed that using the TSX data, the number of PS pixels increased about 3 times in ESPO method than using the conventional channels, e.g., HH, and VV. This increase in S1A data was about 1.7 times in ESPO method. In addition, we investigated the efficiency of the three polarimetric optimization methods i.e. ESPO, BGSM, and Best for the dual polarized S1A and TSX data. Results showed that the PS density increased about 1.9 times in BGSM and about 1.5 times in Best method in TSX data. However, in S1A data, PS density increased about 1.1 times in BGSM. The Best method was not successful in increasing the PS density using the S1A data. Also, the effectiveness of the method was evaluated in urban and non-urban regions. The experimental results showed that the method was successful in significantly increasing the number of final PS pixels in both regions.