成像测井解释模式在基岩油气藏裂缝性储层的应用研究

基岩油气藏裂缝性储层具有复杂的储集空间和储层非均质性,为了实现对基岩油气藏储层的精细评价,以地层微电阻率扫描成像测井和井周声波成像测井资料为核心,通过岩心资料标定,结合录井、常规测井、试油、地质等实际资料,系统建立了基岩油气藏变质岩储层的成像测井解释模式.根据成像测井模式的识别实现了对基岩油气藏特征的认识、准确的裂缝分析和现今地应力场分析.分析结果表明,研究区基底变质岩地层中基本以基岩内幕油气藏为主;裂缝以中高角度缝、网状裂缝为主,其主要走向与井旁断层走向大致平行,属纵裂缝;裂缝主要发育在东西两侧靠近断层、近源的构造陡坡上;现今最大水平主应力方向主要呈NE-SW和NEE-SWW.成像测井解释结果与地质情况吻合较好.     

用岩芯模拟测试参数做模型正演预测储层油、气、水边界

利用地震资料进行AVO油气检测,需要提供准确的储层岩石物性参数．通过对准噶尔盆地西部储层岩样实验室测定,得出合不同流体岩石在不同温度、压力下纵横波速度、速度比、泊松比的变化规律及差异．根据其差异性,用Zoeppritz方程做模型正演,以确定目的层有无AVO响应,以便对地震剖面做针对性的特殊处理．实际应用结果表明,用实验室测试的岩石物性参数做模型正演,可提高AVO检测的准确性,为用地震资料结合实验室岩芯测试参数预测地层油、气、水边界提供了有效手段．     

Study of crustal thickness and poisson’s ratio of the south of Erenhot area by teleseismic receiver function

The Xing’an Mongolian Orogenic Belt (XMOB) and the northern margin of North China Craton (NCC) have undergone multistage tectonic superimposition and the tectonic evolution is extremely complicated. We collect the teleseismic data of 44 temporary broadband seismic stations deployed in the XMOB and the northern margin of NCC to calculate the P wave receiver functions. The crustal thickness and average crustal ratio as well as the Poisson’s ratios beneath 33 stations are estimated using the H-κ stacking method. The results show: (1) the crustal thickness of the study area ranges from 38.7 to 42.7 km, with an average thickness of 41.2 km. There is a great difference in crustal thickness on both sides of Solonker suture zone. The characteristics of crustal thickness support the geodynamic model that the Paleo-Asian Ocean subducted and closed at the Solonker suture zone. (2) The Poisson’s ratios in the study area are low, ranging from 0.215 to 0.277, with an average value of 0.243, suggesting that the rock composition of the area is dominated by felsic-acid rocks. (3) There exists a negative correlation between the Poisson’s ratio and the crustal thickness. Combined with the lower values of Poisson’s ratio, we speculate that the delamination is the major mechanism in crustal extension and thinning in the study area.     

5频等参数阵列相位差感应电阻率

随着复杂油气田的广泛勘探,对测井技术提出了新的要求,阵列感应电阻率的出现可得到较准确的地层真电阻率,但我国的阵列感应电阻率测井仪主要依赖进口,限制了我测井不能在与仪器供给商有利益冲突的国家或地区进行同类作业服务.本文介绍了5频等参数阵列相位感应电阻率测井仪器原理、设计流程,与常规感应电阻率、俄罗斯VIKIZ测井资料的对比.阵列相位差感应电阻率测井仪较好的解决了常规感应测井仪器中存在的纵向分辨率差、径向探测深度浅、井眼影响大、不能解决复杂侵入剖面等问题,具有较好的分辨能力,适合于水淹层测井、薄层测井、剩余油测井.     

DB气田非均质储层级别划分及常规测井识别方法

DB气田以裂缝-孔隙型、孔隙型岩屑砂岩储层为主,非均质性强,裂缝发育程度是决定产能高低的关键因素之一.立足于储层的录井、岩心分析和测井资料,开发了储层级别划分和常规测井识别储层级别的方法.首先,定义了每米产能指数作为标准化的产能参数;其次,基于产能参数与储层物性参数关系的考察,筛选综合物性参数(孔隙度和总渗透率的乘积)作为储层级别划分的评价指标,将DB气田储层分成了2个级别,给出了分级的物性标准;最后,应用主成分分析法计算了综合主成分,基于综合主成分与每米产能指数交会图给出了应用常规测井资料识别储层级别的标准.2口井的应用效果表明,依据上述方法划分及识别的储层级别与生产情况吻合得较好.     

页岩气储层纵横波叠前联合反演方法

杨氏模量与密度乘积(Eρ)能够突显页岩气储层的异常特征,泊松比能够指示储层的含流体性.与常规叠前弹性参数反演相比,基于Eρ、泊松比和密度的叠前纵横波联合反演可以获得更加精确的弹性参数,为页岩气储层识别和流体预测提供可靠的依据.首先,推导了基于Eρ、泊松比和密度的纵波和转换波反射系数近似方程,利用典型模型对新推导的反射系数方程做精度分析,当入射角小于30°时,新推导的反射系数公式具有较高的精度;其次,充分利用纵波和转换波的信息,在贝叶斯的框架下,建立叠前纵横波联合反演流程,进行Eρ、泊松比和密度的直接反演,避免了间接反演带来的累积误差;最后,利用实际工区井模型数据进行算法测试,结果表明,该反演方法所获得的Eρ、泊松比和密度的估计值与真实值吻合较好,满足精细地震反演的精度要求.     

Calculation of porosity from nuclear magnetic resonance and conventional logs in gas-bearing reservoirs

The porosity may be overestimated or underestimated when calculated from conventional logs and also underestimated when derived from nuclear magnetic resonance (NMR) logs due to the effect of the lower hydrogen index of natural gas in gas-bearing sandstones. Proceeding from the basic principle of NMR log and the results obtained from a physical rock volume model constructed on the basis of interval transit time logs, a technique of calculating porosity by combining the NMR log with the conventional interval transit time log is proposed. For wells with the NMR log acquired from the MRIL-C tool, this technique is reliable for evaluating the effect of natural gas and obtaining accurate porosity in any borehole. In wells with NMR log acquired from the CMR-Plus tool and with collapsed borehole, the NMR porosity should be first corrected by using the deep lateral resistivity log. Two field examples of tight gas sandstones in the Xujiahe Formation, central Sichuan basin, Southwest China, illustrate that the porosity calculated by using this technique matches the core analyzed results very well. Another field example of conventional gas-bearing reservoir in the Ziniquanzi Formation, southern Junggar basin, Northwest China, verifies that this technique is usable not only in tight gas sandstones, but also in any gas-bearing reservoirs.     

土的动剪切模量、阻尼比和泊松比研究进展

介绍了现场测试与实验室测试土的最大动剪切模量的差别、动剪切模量和阻尼比与剪应变关系的表达式及其地区经验成果、固结比对最大动剪切模量影响、动泊松比研究、实验误差及其对地震动的影响等方面的主要成果。提出应加强动泊松比研究,加强共振柱和动三轴试验土动力学参数统一的数学模型研究,加强土动力学参数在均等固结与非均等固结条件下关系研究,加强土动力学参数与土的常规物理力学性质指标关系研究和土动力学参数实验误差研究。     

POROSITY AND PORE STRUCTURE FROM ACOUSTIC WELL LOGGING DATA1

Wyllie's time-average equation and subsequent refinements have been used for over 20 years to estimate the porosity of reservoir rocks from compressional (P)-wave velocity (or its reciprocal, transit time) recorded on a sonic log. This model, while simple, needs to be more convincingly explained in theory and improved in practice, particularly by making use of shear (S)-wave velocity. One of the most important, although often ignored, factors affecting elastic velocities in a rock is pore structure, which is also a controlling factor for transport properties of a rock. Now that S-wave information can be obtained from the sonic log, it may be used with P-waves to provide a better understanding of pore structure. A new acoustic velocities-to-porosity transform based on an elastic velocity model developed by Kuster and Toksöz is proposed. Employing an approximation to an equivalent pore aspect ratio spectrum, pore structure for reservoir rocks is taken into account, in addition to total pore volume. Equidimensional pores are approximated by spheres and rounded spheroids, while grain boundary pores and flat pores are approximated by low aspect ratio cracks. An equivalent pore aspect ratio spectrum is characterized by a power function which is determined by compressional-and shear-wave velocities, as well as by matrix and inclusion properties. As a result of this more sophisticated elastic model of porous rocks and a stricter theory of elastic wave propagation, the new method leads to a more satisfactory interpretation and fuller use of seismic and sonic log data. Calculations using the new transform on data for sedimentary rocks, obtained from published literature and laboratory measurements, are presented and compared at atmospheric pressure with those estimated from the time-average equation. Results demonstrate that, to compensate for additional complexity, the new method provides more detailed information on pore volume and pore structure of reservoir rocks. Examples are presented using a realistic self-consistent averaging scheme to consider interactions between pores, and the possibility of extending the method to complex lithologies and shaly rocks is discussed.     

First-order perturbation approximation for rock elastic moduli in transversely isotropic media

Seismic anisotropy is a relatively common seismic wave phenomenon in laminated sedimentary rocks such as shale and it can be used to investigate mechanical properties of such rocks and other geological materials. Young’s modulus and Poisson’s ratio are the most common mechanical properties determined in various rock engineering practices. Approximate and explicit equations are proposed for determining Young’s modulus and Poisson’s ratio in anisotropic rocks, in which the symmetry plane and symmetry axis of the anisotropy are derived from the constitutive equation of transversely isotropic rock. These equations are based on the media decomposition principle and seismic wave perturbation theory and their accuracy is tested on two sets of laboratory data. A strong correlation is found for Young’s modulus in two principal directions and for Poisson’s ratio along the symmetry plane. Further, there is an underprediction of Poisson’s ratio along the symmetry axis, although the overall behavior follows the trend of the measured data. Tests on a real dataset show that it is necessary to account for anisotropy when characterizing rock mechanical properties of shale. The approximate equations can effectively estimate anisotropic Young’s modulus and Poisson’s ratio, both of which are critical rock mechanical data input for hydraulic fracturing engineering.     

川东TS—HNT地区飞仙关组鲕滩储层特征及测井资料解释

简述了川东TS—HNT地区飞仙关组鲕粒储层的地质特征及其储集性能,并介绍了鲕滩储层的测井响应特征。飞仙关组鲕滩储层以孔隙（洞）型为主,具有溶蚀孔洞发育、局部有少量裂缝、储层孔隙结构复杂等特点。准确的确定储层物性参数和岩性是测井解释评价的基础。通过对钻井取芯资料和测井资料的分析研究,对储层四性关系进行分析,建立了适合本区的储层参数测井解释模型,提高了储层物性参数的计算精度;针对研究区鲕滩碳酸盐岩储层孔隙结构复杂、孔渗关系变化多样的特点,以常规测井资料为基础,结合岩芯分析数据及试气投产资料,给出了储层综合测井解释成果,且测井解释结果与实际情况相一致。     

低渗特低渗砂岩储层流体识别技术研究综述和展望

低渗、特低渗储层是国内外油田地质研究的重点,而其流体识别问题更是一个焦点问题.本文根据以往的研究成果,再认识了低渗、特低渗储层流体识别的难点,进而梳理和归纳了流体识别的常规技术和新技术.研究表明,利用单一的测井解释方法容易引起多解性,技术风险高;基于地区地质、岩心、录井等资料,结合多种测井曲线,开展流体的综合识别评价是一个重要的技术思路;将现代地质数学方法和信号分析技术引入流体识别中将会产生积极地意义,本文对此进行了展望.     

Estimating thermal conductivity from core and well log data

The aim of the presented work was to introduce a method of estimating thermal conductivity using well log data. Many petrophysical properties of rocks can be determined both by laboratory measurements and well-logs. It is thus possible to apply geophysical data to empirical models based on relationships between laboratory measured parameters and derive continuous thermal conductivity values in well profiles. Laboratory measurements were conducted on 62 core samples of Meso-Paleozoic rocks from the Carpathian Foredeep. Mathematical models were derived using multiple regression and neural network methods. Geophysical data from a set of seven well logs: density, sonic, neutron, gamma ray, spectral gamma ray, caliper and resistivity were applied to the obtained models. Continuous thermal conductivity values were derived in three well profiles. Analysis of the obtained results shows good consistence between laboratory data and values predicted from well log data.     

Support vector regression for estimating earthquake response spectra

This study uses support vector regression (SVR), a supervised machine learning algorithm, to model the average horizontal response spectrum as a nonparametric function of a set of predictor ground motion variables. Traditional ground motion prediction equations (GMPEs) are derived using parametric regression, where a fixed functional form is selected, and the model coefficients are determined by minimizing the errors on the training set. The SVR model is nonparametric; there is no need to assume a fixed functional form. Using nonlinear basis functions, the data points are mapped into a high dimensional feature space, where nonlinear input-output relationships can be expressed as a linear combination of nonlinear functions, using a subset of the data points. The combination weights are determined by minimizing the generalization error, using a formal mechanism to characterize the trade-off between the model complexity and the quality of fit to the data. Minimization of the generalization error instead of the fitting error leads to better generation to unseen data, and thus reduces the risk of over-fitting for a given number of data points. The SVR model is not based on a specific probability distribution, and is readily applicable to non-Gaussian data. An example application is presented for vertical strike-slip earthquakes, and the predictions from the SVR model are compared to the recently developed GMPEs. The results demonstrate the validity of the proposed model, and suggest that it can be used as an alternative to the conventional ground motion prediction models.     

河北邯郸-邢台地区波速比和泊松比分布特征研究

根据多台和达法,利用邯郸—邢台地区9个数字地震台的观测数据研究了该区波速比和泊松比分布特征.结果显示:(1)9个小区域波速比值在1.696～1.737之间,相关系数在0.988 3～0.999 1之间,研究区平均波速比值为1.719,平均泊松比值为0.244,所得泊松比值与研究区内地壳介质以花岗岩为主一致.(2)研究区内波速比和泊松比变化比较复杂,反映了区内上地壳介质性质的不同乖地质构造的复杂性.     

无井条件下建立碎屑岩储层地震地质模型研究

常规的储层建模以井数据为基础,建立孔隙度、渗透率和含油饱和度等储层属性参数模型,并通过油田开发生产数据进行拟合,得到最佳地质模型.在南海西北部深水区无井控制的情况下,针对中央峡谷浊积水道储层,采用确定性建模与连续型随机建模相结合的方法,建立碎屑岩储层地震地质模型,应用地震正演模拟和相似性分析方法,确定浊积水道砂体最佳模拟参数.文章首先分析了碎屑岩储层特征,应用连续型随机建模的方法模拟储层空间分布.然后分析实际地震、地质资料,应用层序地层学思想,对研究区划分沉积体系域,建立层序地层格架;基于波阻抗和多种地震属性,采用人机交互的方法对浊积水道储层框架结构进行精细解释,建立储层结构模型;将储层结构模型与砂泥互层随机介质进行"交"、"并"运算,利用连续型随机模拟方法对储层内部介质进行精细刻画,建立中央峡谷浊积水道随机介质储层模型;通过对模型正演模拟、常规处理和相似性分析等建立最佳储层模型.文章研究了在无井条件下建立储层地震地质模型的方法,揭示南海西北部深水区中央峡谷浊积水道储层的空间展布和内部结构特征.     

碳酸盐岩裂缝性储层测井识别及评价技术综述与展望

由于碳酸盐岩裂缝发育机制的复杂性,开展碳酸盐岩裂缝性储层的识别与评价一直是测井分析的热点和难点.本文基于大量文献调研,梳理了碳酸盐岩裂缝的定义、成因和分类,系统归纳了碳酸盐岩裂缝性储层的测井响应特征及评价方法,并进行了实例分析.研究表明,常规测井方法对碳酸盐岩裂缝均有不同程度的揭示,基于不同原理的常规测井方法对碳酸岩盐裂缝的响应程度差异显著,利用常规测井方法对碳酸岩盐储层裂缝识别应遵循综合识别原则;碳酸盐岩裂缝成像测井识别方法中,电阻率成像测井、偶极声波测井和核磁共振测井反映裂缝较为直观,但成本高;基于常规测井资料的灰色关联识别方法、神经网络识别方法、小波多尺度识别方法等非线性数学方法,弥补了常规测井和成像测井识别碳酸盐岩裂缝的不足,并且取得较好的应用效果.     

核磁共振测井技术在桩海地区及其它油田中的应用

阐明核磁共振测井（NMR）在储层评价中的作用。利用NMR测井资料对桩海地区长堤油田的储层特性及产能、复杂岩性储层的孔隙度作出评价，并在电阻率测井资料显示不好的复杂储层条件下进行油气水层识别，以及指导完井和钻井方案的实施等。不阐明了核磁共振测井技术具有常规测井技术所不具备的特点，特别是定量的评价孔隙流体流动特性、准确划分产层、直接识别油气水等优点，从而有利于解复杂的地质问题。     

基于小波熵水淹层识别方法探索

储层的孔隙度和电阻率曲线间微差形态波形的复杂程度隐含着储层含油气性的信息,油层水淹程度不同,其时频平面上小波系数能量团存在着显著差异,随水淹程度加重,其能量团分布由复杂逐渐趋于简单单调.油层水淹信息映射在其小波系数能量熵特征上,可使油层水淹信息得到放大,更易于水淹程度识别.基于测井信息的小波熵识别水淹层的方法,对利用传统测井解释理论判别比较困难的低阻油层有较强的识别能力.     

岩石物理模版在储层定量解释中的应用

岩石物理模板采用测井解释的各类岩性矿物骨架点值,选取适合该地区的岩石物理模型,模拟在不同储层组合、不同孔隙及不同饱和度情况下,储层岩石物理参数变化引起的储层测井参数及地球物理响应特征的变化,定量地建立起储层参数同地球物理弹性参数间的解释关系模版.本文根据新场JS42气藏储层参数分析结果,尝试性地将岩石物理解释模板应用于储层定量解释中,对储层高产气区、含水区域进行定量解释,并预测了该气藏的气水界面,该预测结果与实钻井测试情况吻合,证实了该方法的科学性.